Colorimetric Assay for Lead Ions Based on the Leaching of Gold Nanoparticles

Plasmonic nanoparticle sensors: current progress, challenges, and future prospects

Plasmonic nanoparticles (NPs) have played a significant role in the evolution of modern nanoscience and nanotechnology in terms of colloidal synthesis, general understanding of nanocrystal growth mechanisms, and their impact in a wide range of applications. They exhibit strong visible colors due to localized surface plasmon resonance (LSPR) that depends on their size, shape, composition, and the surrounding dielectric environment. Under resonant excitation, the LSPR of plasmonic NPs leads to a strong field enhancement near their surfaces and thus enhances various light-matter interactions. These unique optical properties of plasmonic NPs have been used to design chemical and biological sensors. Over the last few decades, colloidal plasmonic NPs have been greatly exploited in sensing applications through LSPR shifts (colorimetry), surface-enhanced Raman scattering, surface-enhanced fluorescence, and chiroptical activity. Although colloidal plasmonic NPs have emerged at the forefront of nanobiosensors, there are still several important challenges to be addressed for the realization of plasmonic NP-based sensor kits for routine use in daily life. In this comprehensive review, researchers of different disciplines (colloidal and analytical chemistry, biology, physics, and medicine) have joined together to summarize the past, present, and future of plasmonic NP-based sensors in terms of different sensing platforms, understanding of the sensing mechanisms, different chemical and biological analytes, and the expected future technologies. This review is expected to guide the researchers currently working in this field and inspire future generations of scientists to join this compelling research field and its branches.

Metallopeptide nanoreservoirs for concurrent imaging and detoxification of lead (Pb) from human retinal pigment epithelial (hRPE1) cells

Inspired by natural metallopeptides, our work focuses on engineering self-assembling nanostructures of C2-symmetric metallopeptide conjugates (MPC) from a pyridine-bis-tripeptide bioprobe that uniquely detects lead (Pb2+) ions by emitting a fluorescence signal at 450 nm, which is further intensified in the presence of DAPI (λem = 458 nm), enhancing the bioimaging quality. This study enables precise lead quantification by modulating the ionic conformation and morphology. Experimental and theoretical insights elucidate the nanostructure formation mechanism, laying the groundwork for materials encapsulation and advancing lead detoxification. Our proof-of-principle experiment, demonstrating actin filament recovery in lead-treated cells, signifies therapeutic potential for intracellular lead aggregation and introduces novel avenues in biotechnological applications within biomaterials science.

Sandwich-type aptamer-based biosensors for thrombin detection

Thrombin, a proteolytic enzyme, plays an essential role in catalyzing many blood clotting reactions. Thrombin can act as a marker for some blood-related diseases, such as leukemia, thrombosis, Alzheimer's disease and liver disease. Therefore, its diagnosis is of great importance in the fields of biological and medical research. Biosensors containing sandwich-type structures have attracted much consideration owing to their superior features such as reproducible and stable responses with easy improvement in the sensitivity of detection. Sandwich-type platforms can be designed using a pair of receptors that are able to bind to diverse locations of the same target. Herein, we investigate recent advances in the progress and applications of thrombin aptasensors containing a sandwich-type structure, in which two thrombin-binding aptamers (TBAs) identify different parts of the thrombin molecule, leading to the formation of a sandwich structure and ultimately signal detection. We also discuss the pros and cons of these approaches and outline the most logical approach in each section.

Pb2+ Ion Sensors Employing Gold Etching Process: Comparative Investigation on Au Nanorods and Au Nanotriangles

The leaching phenomenon of gold (Au) nanomaterials by Pb2+ ions in the presence of 2-mercaptoethanol (2-ME) and thiosulfate (S2O32- ion) has been systematically applied to a Pb2+ ion sensor. To further investigate the role of Pb2+ ions in sensors containing Au nanomaterials, we revisited the leaching conditions for Au nanorods and compared them with the results for Au nanotriangles. By monitoring the etching rate, it was revealed that Pb2+ ions were important for the acceleration of the etching rate mainly driven by 2-ME and S2O32- pairs, and nanomolar detection of Pb2+ ions were shown to be promoted through this catalytic effect. Using the etchant, the overall size of the Au nanorods decreased but showed an unusual red-shift in UV-Vis spectrum indicating increase of aspect ratio. Indeed, the length of Au nanorods decreased by 9.4% with the width decreasing by 17.4% over a 30-min reaction time. On the other hand, the Au nanotriangles with both flat sides surrounded mostly by dense Au{111} planes showed ordinary blue-shift in UV-Vis spectrum as the length of one side was reduced by 21.3%. By observing the changes in the two types of Au nanomaterials, we inferred that there was facet-dependent alloy formation with lead, and this difference resulted in Au nanotriangles showing good sensitivity, but lower detection limits compared to the Au nanorods.

Gold nanoparticles as colorimetric probes in food analysis: Progress and challenges

The rapid, sensitive and reliable food safety control is urgently needed due to the harmful effects of the food contaminants on human health. Colorimetric approach has exhibited promising potential for the detection of food contaminants due to their easy preparation, rapid detection, high sensitivity, and naked-eye sensing. In recent years, AuNPs-based colorimetric probes have been extensively explored for food analysis. The present article reviews the development of AuNPs-based colorimetric probes for colorimetric sensing and their applications in food analysis. It generally summarizes the properties of AuNPs and introduces the preparation and functionalization methods of AuNPs. An overview of the colorimetric sensing mechanisms of AuNPs-based probes and their applications in analysis of food contaminants are also provided. Although AuNPs-based colorimetric probes show many advantages in detection of food contaminants, challenges remain in terms of complexity of food matrices, multiple analytes detection in a single go, and testing conditions interference.

Plasmonic nanoparticle etching-based optical sensors: current status and future prospects

Plasmonic nanoparticles are an emerging tool for developing label-free multicolorimetric sensors for biosensing and chemosensing applications. The color absorbed by nanoparticles from visible light is influenced by their size, shape, orientation, and interparticle distance. Differently sized and shaped gold and silver nanoparticles exhibit a wide range of colors, aiding in the development of label-free sensors. Etching is the process of oxidizing nanoparticles, which alters their aspect ratio, shape, plasmonic peak, and outward appearance. It is typically used to create sensitive sensing platforms. Through etching, analytes could be detected in a simple, sensitive, and selective manner. The multicolor readout of nanoparticle etching-based multicolorimetric sensors can overcome the limitations of conventional colorimetric assays and improve the accuracy of visual inspection. This review discusses different approaches for target sensing using nanoparticle etching strategies like direct etching, enzyme-mediated etching, chemical reaction-driven etching, and anti-etching-based sensors and their mechanisms. In the future, etching strategies could be modified into portable sensing devices to detect a variety of analytes, which will aid in the development of on-time, in situ, and point-of-care sensing systems.

Point-of-Care Detection of Antioxidant in Agarose-Based Test Strip through Antietching of Au@Ag Nanostars

Antioxidants are crucial for human health, and the detection of antioxidants can provide valuable information for disease diagnosis and health management. In this work, we report a plasmonic sensing approach for the determination of antioxidants based on their antietching capacity toward plasmonic nanoparticles. The Ag shell of core-shell Au@Ag nanostars can be etched by chloroauric acid (HAuCl₄), whereas antioxidants can interact with HAuCl₄, which prevents the surface etching of Au@Ag nanostars. We modulate the thickness of the Ag shell and morphology of the nanostructures, showing that the core-shell nanostars with the smallest thickness of Ag shell have the best etching sensitivity. Owing to the extraordinary surface plasmon resonance (SPR) property of Au@Ag nanostars, the antietching effect of antioxidants can induce a significant change in both the SPR spectrum and the color of solution, facilitating both the quantitative detection and naked-eye readout. This antietching strategy enables the determination of antioxidants such as cystine and gallic acid with a linear range of 0.1-10 μM. The core-shell Au@Ag nanostars are further immobilized in agarose gels to fabricate test strips, which can display different color changes in the presence of HAuCl₄ from 0 to 1000 μM. The agarose-based test strip is also capable of detecting antioxidants in real samples, which allows naked-eye readout and quantitative detection by a smartphone.

Colorimetric detection of Cu2+ based on the inhibition strategy for etching reaction of AgNCs

In this study, an efficient and simple colorimetric method for sensing of Cu²⁺ was established using inhibition effect of Cu²⁺ to the etching reaction of silver nanocubes (AgNCs) induced by H₂O₂. The etching reaction of AgNCs changes its morphology and absorbance with the visual appearance from yellow to colorless. On the contrary, the presence of Cu²⁺ can significantly inhibit the etching progress. Thus Cu²⁺ induces the obvious absorbance enhancement compared with AgNCs/H₂O₂ system. This design realizes colorimetric detection of Cu²⁺ based on the inhibition effect of etching reaction using AgNCs nanoprobe. The colorimetric response of AgNCs nanoprobe in ΔAbs_417.5 shows the linearity with the increasing concentrations of Cu²⁺ from 0.01 to 40 μM with good selectivity. The concentration limit of Cu²⁺ efficaciously discriminated by the naked eye is as low as 0.01 μM. Furthermore, the Euclidean distance (ED) of the difference map in RGB change before and after response with Cu²⁺ is applied for further visualization recognition of Cu²⁺. All the above results indicate the outstanding practicability and accuracy of the proposed assay for Cu²⁺ sensing.

Picomolar Detection of Lead Ions (Pb2+) by Functionally Modified Fluorescent Carbon Quantum Dots from Watermelon Juice and Their Imaging in Cancer Cells

Water contamination due to the presence of lead is one of the leading causes of environmental and health hazards because of poor soil and groundwater waste management. Herein we report the synthesis of functionally modified luminescent carbon quantum dots (CQDs) obtained from watermelon juice as potential nanomaterials for the detection of toxic Pb²⁺ ions in polluted water and cancer cells. By introducing surface passivating ligands such as ethanolamine (EA) and ethylenediamine (ED) in watermelon juice, watermelon-ethanolamine (WMEA)-CQDs and watermelon-ethylenediamine (WMED)-CQDs exhibited a remarkable ~10-fold and ~6-fold increase in fluorescence intensity with respect to non-doped WM-CQDs. The relative fluorescence quantum yields of WMEA-CQDs and WMED-CQDs were found to be 8% and 7%, respectively, in an aqueous medium. Among various functionally-modified CQDs, only WMED-CQDs showed high selectivity towards Pb²⁺ ions with a remarkably good limit of detection (LoD) of 190 pM, which is less than that of the permissible limit (72 nM) in drinking water. The functionally altered WMED-CQDs detected Pb²⁺ metal ions in polluted water and in a human cervical cancer cell line (HeLa), thus advocating new vistas for eco-friendly nanomaterials for their use as diagnostic tools in the environment and biomedical research areas.

MXene catalytic amplification-fluorescence/absorption dimode aptamer sensor for the detection of trace Pb2+ in milk

Lead ion (Pb²⁺) is a toxic heavy metal, which is very harmful to organisms. Therefore, the establishment of a rapid, simple, and sensitive method is of great significance to food safety and human health. It was found that MXeneTi₃C₂ nanosheet (NS) has a strong catalytic effect on the oxidation of 3,3,5,5-tetramethylbenzidine (TMB) via H₂O₂ to form the oxidized product (TMB_OX); it has a strong fluorescence peak at 415 nm and an absorption (Abs) peak at 295 nm. The aptamer of Pb²⁺ (Apt_pb) can be adsorbed on the surface of an NS to form MXene-Apt conjugates, which reduces its catalytic active sites and inhibits its catalytic activity. When the target Pb²⁺ is added, it specifically binds with Apt_pb to release MXene NSs to enhance the dimode signals. Therefore, a new MXene catalytic fluorescence/absorption dimode aptamer biosenering platform was fabricated for the determination of trace Pb²⁺ in milk and water samples, with the fluorescence assay linear range (LR) of 5.0 × 10⁻²-2.0 nmol/L.

"Nano Killers" Activation by permonosulfate enables efficient anaerobic microorganisms disinfection

The development of effective nanomaterials for killing anaerobic bacteria is essential for human health and economic development. Here, we propose a new bactericidal mechanism where theoretical calculations are in good agreement with experimental results. The "poison arrow-head" of MoS₂ nanosheets enables the vigorous extraction of lipids from the cell membrane. Based on density functional calculations, oxidation active species (OAS) are generated due to the strong adsorption energy between S vacancies in MoS₂ and chemical substrates (permonosulfate (PMS) and H₂O). These OAS can be visualized as numerous moving "nano killers", constantly oxidizing the lipids around MoS₂; thereby, re-releasing the surface of the sharp knife. The process of physical extraction collaborated with chemical oxidation not only precisely positions the cell membrane but also allows for continuous sterilization. This work digs into the mechanism of anaerobic bacterial sterilization, which sheds significant light on biological analysis, antibacterial, cancer therapy, and anti microbiologically influenced corrosion.

Signal-on fluorescent sensing strategy for Pb2+ detection based on 8-17 DNAzyme-mediated molecular beacon-type catalytic hairpin assembly circuit

Based on a Pb²⁺-specific 8-17 DNAzyme-induced catalytic hairpin assembly (CHA), a simple signal-on fluorescence strategy for lead ion detection was established. 8-17 DNAzyme was used as the recognition element of Pb²⁺, which catalyzed the cleavage of the RNA base embedded in the DNA substrate strand, while releasing part of the substrate strand (S') as CHA initiator. And two hairpin probes (H1 and H2-FQ) were designed according to the sequence of S' for CHA, in which H2-FQ was labeled with the fluorophore FAM and quencher BHQ-1 as fluorescent "molecular switch" based on fluorescence resonance energy transfer (FRET). In the presence of Pb²⁺, the CHA reaction was triggered to form a large number of H1-H2 complexes, enabling enzyme-free isothermal amplification and a signal-on fluorescence strategy. In the concentration range of 0.5-1000 nM, the fluorescence signal increases with the increase of Pb²⁺ concentration. The quantitative detection limit of Pb²⁺ by this method is 0.5 nM, which has better detection performance compared with the FQ-labeled 8-17 DNAzyme method. The established biosensor exhibits good specificity and can be effectively used for the detection of Pb²⁺ in real samples of river water and grass carp. Through ingenious nucleic acid sequence design, DNAzyme and CHA reactions are integrated to realize the enzyme-free isothermal amplifications and sensitive detection of Pb²⁺, which holds potential versatility in food supervision and environmental monitoring.

Plasmonic Nanomaterials for Colorimetric Biosensing: A Review

In the last few decades, plasmonic colorimetric biosensors raised increasing interest in bioanalytics thanks to their cost-effectiveness, responsiveness, and simplicity as compared to conventional laboratory techniques. Potential high-throughput screening and easy-to-use assay procedures make them also suitable for realizing point of care devices. Nevertheless, several challenges such as fabrication complexity, laborious biofunctionalization, and poor sensitivity compromise their technological transfer from research laboratories to industry and, hence, still hamper their adoption on large-scale. However, newly-developing plasmonic colorimetric biosensors boast impressive sensing performance in terms of sensitivity, dynamic range, limit of detection, reliability, and specificity thereby continuously encouraging further researches. In this review, recently reported plasmonic colorimetric biosensors are discussed with a focus on the following categories: (i) on-platform-based (localized surface plasmon resonance, coupled plasmon resonance and surface lattice resonance); (ii) colloid aggregation-based (label-based and label free); (iii) colloid non-aggregation-based (nanozyme, etching-based and growth-based).

Heavy metal ion detection using green precursor derived carbon dots

The discovery of carbon dots (CDs) for environmental remediation has gained awareness because of the diverse economically viable and environmental friendly green precursors generated from biowastes and biomass compared to the toxic inorganic quantum dots and CDs prepared from chemical precursors. This review presents the recent progress in green CDs, including their synthesis methods and sensing applications for the detection of heavy metal ions such as Iron (III), Mercury (II), Copper (II), Chromium (VI), Lead (II), Arsenic (III), Cobalt (II), Aluminum (III), Silver (I), and Gold (III) which are prominent environmental pollutants. The comparison based on selectivity, sensitivity, quantum yield, detection limit, linear concentration range, and sensing mechanisms are also reported. This review also covers the performance of doped green CDs using heteroatoms, toward the detection of heavy metal ions. Apart from the future perspectives, this review provides a general guide to use such environmental friendly CDs to detect harmful pollutants.

Capability of Au nano-rhombic dodecahedra in a label-free colorimetric assay: application in the determination of S2− and Hg2+

Au nano-rhombic dodecahedra  with high sensitivity to the environmental refractive index afford sensitive detection of S2- and Hg2+.

A Review on Metal- and Metal Oxide-Based Nanozymes: Properties, Mechanisms, and Applications

Since the ferromagnetic (Fe3O4) nanoparticles were firstly reported to exert enzyme-like activity in 2007, extensive research progress in nanozymes has been made with deep investigation of diverse nanozymes and rapid development of related nanotechnologies. As promising alternatives for natural enzymes, nanozymes have broadened the way toward clinical medicine, food safety, environmental monitoring, and chemical production. The past decade has witnessed the rapid development of metal- and metal oxide-based nanozymes owing to their remarkable physicochemical properties in parallel with low cost, high stability, and easy storage. It is widely known that the deep study of catalytic activities and mechanism sheds significant influence on the applications of nanozymes. This review digs into the characteristics and intrinsic properties of metal- and metal oxide-based nanozymes, especially emphasizing their catalytic mechanism and recent applications in biological analysis, relieving inflammation, antibacterial, and cancer therapy. We also conclude the present challenges and provide insights into the future research of nanozymes constituted of metal and metal oxide nanomaterials.

Highly Sensitive and Selective Fluorescence "Turn-On" Detection of Pb (II) Based on Fe3O4@Au-FITC Nanocomposite

New nanocomposites, Fe₃O₄@Au-FITC, were prepared and explored to develop a fluorescent detection of Pb²⁺. The Fe₃O₄@AuNPs-FITC nanocomposites could be etched by Pb²⁺ in the presence of Na₂S₂O₃, leading to fluorescence recovery of FITC quenched by Fe₃O₄@Au nanocomposites. With the increase of Pb²⁺ concentration, the fluorescence recovery of Fe₃O₄@AuNPs-FITC increased gradually. Under optimized conditions, a detection limit of 5.2 nmol/L of Pb²⁺ with a linear range of 0.02-2.0 µmol/L were obtained. The assay demonstrated negligible response to common metal ions. Recoveries of 98.2-106.4% were obtained when this fluorescent method was applied in detecting Pb²⁺ spiked in a lake-water sample. The above results demonstrated the high potential of ion-induced nanomaterial etching in developing robust fluorescent assays.

Review of optical sensing and manipulation of chiral molecules and nanostructures with the focus on plasmonic enhancements [Invited]

Chiral molecules are ubiquitous in nature; many important synthetic chemicals and drugs are chiral. Detecting chiral molecules and separating the enantiomers is difficult because their physiochemical properties can be very similar. Here we review the optical approaches that are emerging for detecting and manipulating chiral molecules and chiral nanostructures. Our review focuses on the methods that have used plasmonics to enhance the chiroptical response. We also review the fabrication and assembly of (dynamic) chiral plasmonic nanosystems in this context.

TiO2 Nano-test tubes as a solid visual platform for sensitive Pb2+ ion detection based on a fluorescence resonance energy transfer (FRET) process

A cost-effective, facile, and sensitive fluorescence sensing strategy for Pb²⁺ ion detection has been developed based on the fluorescence resonance energy transfer (FRET) between carbon quantum dots (CQDs) and Au nanoparticles (NPs). Glutathione (GSH)-synthesized CQDs acted as both the fluorescence donor and the sorbent to extract Pb²⁺ ions from the solution via Pb-GSH complexes. Pb²⁺ ions on CQDs reacted with -SH groups on AuNPs to generate sandwich-type Au-PdS-CQDs, leading to a dramatic decrease in the fluorescence of the CQDs. To expand the potential applications of this strategy, we constructed a sensing strategy using self-organized TiO₂ nanotube arrays (TiNTs). The high aspect ratio and transparency for light emitted from the CQDs enabled the TiNTs to serve as a sensitive solid visual platform for the highly selective detection of Pb²⁺ ions with a detection limit as low as 4.1 × 10^-8 mg mL^-1. More importantly, the long observation length combined with a small volume enabled a sample acquisition volume of only 2.1 × 10^-3 μL, which is smaller than the traditional fluorescence analysis in solution and on commercially available test paper, thus endowing this visual platform with the potential for use in single-cell diagnostics.

Nanomaterial-based fluorescent sensors for the detection of lead ions

Lead (Pb) poisoning has been a scourge to the human to pose sighnificant health risks (e.g., organ disorders, carcinogenicity, and genotoxicity) as observed from many different parts of the world, especially in developing countries. The demand for accurate sensors for its detection, especially in environmental media (soil, water, food, etc.) has hence been growing steadily over the years. The potential utility of fluorescent nanosensors as an important analytical tool is recognized due to their astonishing characteristics (e.g., high sensitivity/selectivity, enhanced detection performance, low cost, portability, and rapid on-site detection ability). This review is organized to offer insight into the recent developments in fluorescent nanosensing technology for the detection of lead ions (Pb²⁺). To this end, different types of nanomaterials explored for such applications have been classified and evaluated with respect to performance, especially in terms of sensitivity. This review will help researchers gain a better knowledge on the status and importance of optical nanosensors so as to remediate the contamination of lead and associated problems. The technical challenges and prospects in the development of nanosensing systems for Pb²⁺ are also discussed.

Gold nanostar as an ultrasensitive colorimetric probe for picomolar detection of lead ion

The sensitivity for analytes of interest is vital for environment protection and food safety. Here, we propose an extremely sensitive assay toward Pb²⁺ by using gold nanostars (GNSs) as probes based on the catalytic activity of Pb on etching gold atoms after being reduced in the presence of 2-mercaptoethanol (2-ME) and sodium thiosulfate. GNSs were prepared by using 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid as both the reducing and capping agents, enabling high stability and sensitivity for quantitation of Pb²⁺. Upon increasing Pb²⁺ concentration over the range of 0-10 μM, GNS solution color changed from greenish-blue to blue to purple to red, and eventually to colorless. The color change can be distinguished by naked eye at the Pb²⁺ concentration as low as 200 pM. Through monitoring longitudinal localized surface plasmon of GNSs, Pb²⁺ could be detected with a limit of detection of 1.5 pM, and the working range is 2 pM-1 μM. The ultra-high sensitivity of our assay stems from the high catalysis of Pb on etching gold on tips and branches in the presence of 2-ME and sodium thiosulfate, leading to the shape deformation to spherical gold nanoparticle and the corresponding significant changes in their optical properties. The assay provides high selectivity of Pb²⁺ over the tested interfering metal ions like Cu²⁺. With high sensitivity and selectivity, the assay was efficiently validated by analyzing water samples and monitoring the migration of Pb²⁺ from the tested container to water.

Biomedical applications of metal–organic framework (MOF)-based nano-enzymes

In the present review, the types and activities of nanometer-sized enzymes are summarized, with recent progress of nanometer-sized enzymes in the field of biomedical detection.

A solid-state colorimetric fluorescence Pb2+-sensing scheme: mechanically-driven CsPbBr3 nanocrystallization in glass

Highly toxic Pb2+ poses a great threat to the health of human beings and ecosystems, urgently calling for an efficient Pb2+ detection method. Herein, we demonstrated a brand-new solid-state fluorescence Pb2+-sensing scheme based on a type of Pb2+-responsive borate glass powder that is able to precipitate CsPbBr3 nanocrystals on the glass surface upon grinding with Pb2+ sources, following a mechanically driven glass crystallization mechanism. Pb2+ sensing is achieved via the Pb2+ concentration-dependent green emission of CsPbBr3 as an indicator signal and independent red emission of Eu3+ as a reference signal. Under UV light irradiation, the obvious emissive color variation from red to green as Pb2+ concentration varies enables the intuitive Pb2+-sensing by naked eyes. With the aid of a spectrometer and smartphone, Pb2+ concentration can be quantitatively determined with the detection limit as low as ∼70 ppm and ∼400 ppm, respectively. The semi-quantitative Pb2+ detection is also possible by comparing the emissive color with the calibrated color card. Hopefully, the proposed solid-state fluorescence Pb2+-sensing strategy with high selectivity can be used for portable and quick Pb2+ analysis in daily life.

Colorimetric determination of Pb2+ ions based on surface leaching of Au@Pt nanoparticles as peroxidase mimic

We report the first use of metallic nanozyme as colorimetric probe for Pb²⁺ determination. The method is based on the surface leaching of Au@PtNP nanozyme by Pb²⁺-S₂O₃^2- ions, accompanied by a decreased catalytic activity of the metallic nanozyme. To construct this colorimetric determination, the Pt deposition onto the AuNPs was carefully investigated and other experimental factors including kind of substrate and buffer were optimized. With increasing Pb²⁺ concentration, the catalytic activity of the Au@PtNPs decreased gradually. As a result, the blue color at 650 nm from the oxidation of 3,3',5,5'-tetramethylbenzidine by H₂O₂ faded gradually. A determination limit of 3.0 nM Pb²⁺ with a linear range from 20 to 800 nM was obtained. The assay demonstrated negligible response to common metal ions even at elevated concentrations. This colorimetric method was applied to the determination of Pb²⁺ ions spiked in lake water samples, and good recoveries (96.8-105.2%) were obtained. The above results indicate the potential application of metallic nanozymes in developing robust colorimetric assays. Graphical abstract Schematic representation of the surface leaching of Au@PtNP nanozyme by Pb²⁺-S₂O₃^2- ions, accompanying the decreased catalytic activity of the metallic nanozyme.

Designable Spectrometer-Free Index Sensing Using Plasmonic Doppler Gratings

Typical nanoparticle-based plasmonic index sensors detect the spectral shift of localized surface plasmon resonance (LSPR) upon the change of the environmental index. Therefore, they require broadband illumination and spectrometers. The sensitivity and flexibility of nanoparticle-based index sensors are usually limited because LSPR peaks are usually broad and the spectral position cannot be freely designed. Here, we present a fully designable index sensing platform using plasmonic Doppler gratings (PDGs), which provide broadband and azimuthal angle dependent grating periodicity. Different from LSPR sensors, PDG index sensors are based on the momentum matching between photons and surface plasmons via the lattice momentum of the grating. Therefore, the index change is translated into the variation of the in-plane azimuthal angle for photon-to-plasmon coupling, which manifests as directly observable dark bands in the reflection image. The PDG can be freely designed to optimally match the range of index variation for specific applications. In this work, we demonstrate PDG index sensors for large (n = 1.00-1.52) and small index variations (n = 1.3330-1.3650). The tiny and nonlinear index change of the water-ethanol mixture has been clearly observed and accurately quantified. Since the PDG is a dispersive device, it enables on-site and single-color index sensing without a spectrometer and provides a promising spectroscopic platform for on-chip analytical applications.

Colorimetric Sensing of Pb2+ Ion by Using Ag Nanoparticles in the Presence of Dithizone

Colorimetric analysis of heavy metal ions can be realized by the aid of Ag nanoparticles to improve the analytical characteristics. The method is based on the localized surface plasmon resonance (LSPR) properties of the Ag nanoparticles (AgNPs). In this work, we applied the AgNPs with the addition of dithizone to further improve the selectivity and sensitivity of Pb2+ analysis. Colorimetric sensing of Pb2+ ions based on the polyvinyl alcohol (PVA)-stabilized-colloidal AgNPs in the presence of dithizone is reported. A linear decrease in the AgNPs LSPR absorbance at 421 nm was observed along with the increase in the Pb2+ concentration in the range of 0.50–10 µg/L. The other ions give a minor change in the LSPR absorbance of colloidal AgNPs. The Pb2+ limit of detection, the limit of quantification, and sensitivity were found to be 0.64 ± 0.04 µg/L, 2.1 ± 0.15 µg/L, 0.0282 ± 0.0040 L/µg (n = 5), respectively. The obtained sensitivity is comparable with that of the immunosensing method. The proposed method could offer a good alternative for colorimetric analysis of Pb2+ ions by using nanoparticles in the presence of ligands, which can improve selectivity.

Gold Nanoparticle-Based Colorimetric Strategies for Chemical and Biological Sensing Applications

Gold nanoparticles are popularly used in biological and chemical sensors and their applications owing to their fascinating chemical, optical, and catalytic properties. Particularly, the use of gold nanoparticles is widespread in colorimetric assays because of their simple, cost-effective fabrication, and ease of use. More importantly, the gold nanoparticle sensor response is a visual change in color, which allows easy interpretation of results. Therefore, many studies of gold nanoparticle-based colorimetric methods have been reported, and some review articles published over the past years. Most reviews focus exclusively on a single gold nanoparticle-based colorimetric technique for one analyte of interest. In this review, we focus on the current developments in different colorimetric assay designs for the sensing of various chemical and biological samples. We summarize and classify the sensing strategies and mechanism analyses of gold nanoparticle-based detection. Additionally, typical examples of recently developed gold nanoparticle-based colorimetric methods and their applications in the detection of various analytes are presented and discussed comprehensively.

Nanomaterial enabled sensors for environmental contaminants

The need and desire to understand the environment, especially the quality of one's local water and air, has continued to expand with the emergence of the digital age. The bottleneck in understanding the environment has switched from being able to store all of the data collected to collecting enough data on a broad range of contaminants of environmental concern. Nanomaterial enabled sensors represent a suite of technologies developed over the last 15 years for the highly specific and sensitive detection of environmental contaminants. With the promise of facile, low cost, field-deployable technology, the ability to quantitatively understand nature in a systematic way will soon be a reality. In this review, we first introduce nanosensor design before exploring the application of nanosensors for the detection of three classes of environmental contaminants: pesticides, heavy metals, and pathogens.

A Colorimetric Sensor for the Visual Detection of Azodicarbonamide in Flour Based on Azodicarbonamide-Induced Anti-Aggregation of Gold Nanoparticles

Azodicarbonamide (ADA) in flour products can be converted into carcinogenic biurea and semicarbazide hydrochloride after baking. Thus, it is mandatory to determine ADA in flour. We herein developed a colorimetric method for the rapid and visual detection of ADA in flour based on glutathione (GSH)-induced gold nanoparticles (AuNPs) aggregation and specific reaction between ADA and GSH. The GSH can react to AuNPs via Au-SH covalent bond to form a network structure, which leads to AuNPs aggregation to produce color change, whereas ADA can specifically react with GSH to lead to the coupling of two GSH molecules, which makes GSH lose a -SH group and thus decreases the aggregation degree of AuNPs induced by GSH. This provided a platform for field-portable colorimetric detection of ADA. The colorimetric sensor can be used to detect as little as 0.33 μM (38.3 ppb) of ADA by naked eye observation and 0.23 μM (26.7 ppb) of ADA by spectrophotometry within 2 h. The method was successfully used to detect ADA in flour with a recovery of 91-104% and a relative standard deviation (RSD) < 6%. The visual detection limit of sensor is lower than the ADA limitation in flour (45 mg/kg), which makes the sensor a potential approach for the instrument-free visual and on-site detection of ADA in flour.

Plasmonic Interface Modified with Graphene Oxide Sheets Overlayer for Sensitivity Enhancement

A novel strategy to modify the plasmonic interface by spin-coating an overlayer of graphene oxide sheets (GOSs) on top of the surface plasmon resonance (SPR) sensor is proposed and demonstrated. Thanks to the excellent electrical conductivity, large surface area, and high-refractive index of the GOSs layer, the GOSs-modified SPR (GOSs-SPR) sensor achieves an improved sensitivity in the detection of bulky refractive index solutions and bovine serum albumin (BSA) solutions. The maximum sensitivity of 2715.1 nm/RIU achieved by three spin-coatings shows an enhancement of 20.2% than the case without the modification of the GOSs overlayer. Benefiting from the large surface area and abundant surface functional groups, the GOSs-SPR sensor has a greater sensitivity enhancement (up to 39.35%) in the detection of the BSA molecules. Most importantly, we have firstly experimentally demonstrated that the GOSs overlayer with thickness over hundreds nanometers can still lead to a great enhancement of sensitivity of SPR sensors. Additionally, the proposed modification method for the plasmonic interface is a simple and effective strategy to boost the sensitivity in a chemical-free and environment-friendly manner, without additional chemical or biological amplification steps. These unique features make the proposed GOSs-SPR biosensor a low-cost and biocompatible platform in the fields of biochemical sensing, drug screening, and environmental monitoring.

Protamine-stabilized gold nanoclusters as a fluorescent nanoprobe for lead(II) via Pb(II)-Au(I) interaction

The authors report on a one-pot approach for synthesizing highly fluorescent protamine-stabilized gold nanoclusters. These are shown to be a viable nanoprobe for selective and sensitive fluorometric determination of lead(II) via quenching of fluorescence via Pb(II)-Au(I) interaction. Under optimized conditions, fluorescence measured at excitation/emission peaks of 300/599 nm drops in the 80 nM-15 μM lead(II) concentration range. The detection limit is 24 nM, and relative standard deviations (for n = 11) at concentrations of 0.10, 4.0 and 15 μM are 1.6, 2.5 and 1.9%, respectively. The relative recoveries of added lead(II) in the water samples ranged from 97.9 ± 2.29% to 101.2 ± 1.83%. Graphical abstract Lead(II) ions are found to be able to selectively and sensitively quench the fluorescence of the protamine-gold nanoclusters (PRT-AuNCs). Thereby, an inexpensive, selective and sensitive lead(II) assay was established.

Controlled etching and tapering of Au nanorods using cysteamine

While gold nanorods (AuNRs) have found many applications due to their unique optical properties, a few challenges persist in their synthesis. Namely, it is often difficult to reproducibly synthesize AuNRs with specific and monodisperse sizes, especially at shorter aspect ratios. Here, we report a method of post-synthesis precise tailoring of AuNRs by etching with cysteamine. Cysteamine selectively etches AuNRs from their ends while preserving the initial rod shape and monodispersity, making this a viable means of obtaining highly monodisperse short AuNRs down to aspect ratio 2.3. Further, we explore the effect of this etching method on two types of silica-coated AuNRs: silica side-coated and silica end-coated AuNRs. We find that the etching process is cysteamine concentration-dependent and can lead to different degrees of sharpening of the silica-coated AuNRs, forming elongated tips. We also find that cysteamine behaves only as a ligand at concentrations above 200 mM, as no etching of the AuNRs is observed in this condition. Simulations show that excitation of plasmon resonances in these sharpened AuNRs produces local electric fields twice as strong as those produced by conventional AuNRs. Thus, cysteamine etching of AuNRs is shown to be an effective means of tailoring both the size and shape of AuNRs along with their corresponding optical properties. At the same time, the resulting cysteamine coating on the etched AuNRs displays terminal amino groups that allow for further functionalization of the nanorods.

Highly selective and sensitive coumarin-triazole-based fluorometric 'turn-off' sensor for detection of Pb2+ ions

Exposure to even very low concentrations of Pb²⁺ is known to cause cardiovascular, neurological, developmental, and reproductive disorders, and affects children in particular more severely. Consequently, much effort has been dedicated to the development of colorimetric and fluorescent sensors that can selectively detect Pb²⁺ ions. Here, we describe the development of a triazole-based fluorescent sensor L5 for Pb²⁺ ion detection. The fluorescence intensity of chemosensor L5 was selectively quenched by Pb²⁺ ions and a clear color change from colorless to yellow could be observed by the naked eye. Chemosensor L5 exhibited high sensitivity and selectivity towards Pb²⁺ ions in phosphate-buffered solution [20 mM, 1:9 DMSO/H₂ O (v/v), pH 8.0] with a 1:1 binding stoichiometry, a detection limit of 1.9 nM and a 6.76 × 10⁶  M^-1 binding constant. Additionally, low-cost and easy-to-prepare test strips impregnated with chemosensor L5 were also produced for efficient of Pb²⁺ detection and proved the practical use of this test.

Colorimetric determination of ferrous ion via morphology transition of gold nanorods

A colorimetric method is described for the determination of ferrous ion (Fe²⁺) with high sensitivity and selectivity. The method is based on catalytic etching of gold nanorod (NR). In an acid condition, Fe²⁺ reacts with H₂O₂ to produce superoxide radical (O₂^•-) that etches gold NRs from the low energy surface along the longitudinal direction preferentially. As a result, the changes in the absorption spectrum and color of gold NR can be measured and also can be detected visually. Under the optimal conditions, the assay has very low detection limit (13.5 nM) and a linear response in a concentration range of 75 to 1 μM. The method was applied to the determination of Fe²⁺ in spiked samples of fetal bovine serum and also transferred to a kind of test stripe for use in fast practical applications. A unique colorimetric sensing method is demonstrated for the colorimetric detection of Fe²⁺, again based on the oxidation of gold nanorods which leads to the blue-shift of the absorption. Graphical abstract A unique colorimetric sensing method was shown for the colorimetric detection of Fe²⁺. Fe²⁺reacts with H₂O₂ to generate superoxide radical that oxidize gold nanorods. This leads to a color change from blue-green to pink.

DNA Modified Fe3O4@Au Magnetic Nanoparticles as Selective Probes for Simultaneous Detection of Heavy Metal Ions

Driven by the urgent need to detect trace heavy metal ions in various real water samples, this article demonstrates for the first time an electrochemical biosensor based on DNA modified Fe₃O₄@Au magnetic nanoparticles (NPs). Three DNA probes are designed to contain certain mismatched base pairs. One is thiolated and modified on the surface of Fe₃O₄@Au NPs (DNA 1). The other two probes (DNA 2 and 3) are labeled with two independent electrochemical species. Stable structures of cytosine-Ag⁺-cytosine and thymine-Hg²⁺-thymine formed in the presence of Ag⁺ and Hg²⁺ can assist the hybridization of DNA 1/DNA 2 and DNA 1/DNA 3, which locate corresponding electrochemical species onto the surface of the magnetic NPs. The achieved nanocomposites are then used as selective electrochemical probes for the detection of heavy metal ions by recording the square wave voltammetry signals. Simultaneous detection of Ag⁺ and Hg²⁺ is demonstrated without significant interference, and their individual high sensitivities are fundamentally preserved, which meet the requirements of U.S. Environmental Protection Agency (USEPA). Furthermore, the proposed method has been challenged by various real water samples. The results confirm the DNA modified magnetic NPs based sensing method may have potential applications for the monitoring of heavy metal ions in real sample analysis.

A novel colorimetric sensor for sensitive determination of R-citalopram based on the plasmonic properties of silver nanoparticles

A simple and reliable colorimetric method for visual differentiation between the S-citalopram and R-citalopram enantiomers in aqueous solution based on the inherent chirality of silver nanoparticles as a colorimetric probe was presented.

Selective and sensitive colorimetric determination of cobalt ions using Ag–Au bimetallic nanoparticles

Selective and sensitive colorimetric detection of Co²⁺based on the aggregation of Ag–Au BNPs is due to the formation of positively charged (en)₂CoS₂O₃⁺on the negative nanoparticle surface.