Conjugation of Glucose Oxidase onto Mn-Doped ZnS Quantum Dots for Phosphorescent Sensing of Glucose in Biological Fluids

Integrating microneedles and sensing strategies for diagnostic and monitoring applications: The state of the art

Microneedles (MNs) offer minimally-invasive access to interstitial fluid (ISF) - a potent alternative to blood in terms of monitoring physiological analytes. This property is particularly advantageous for the painless detection and monitoring of drugs and biomolecules. However, the complexity of the skin environment, coupled with the inherent nature of the analytes being detected and the inherent physical properties of MNs, pose challenges when conducting physiological monitoring using this fluid. In this review, we discuss different sensing mechanisms and highlight advancements in monitoring different targets, with a particular focus on drug monitoring. We further list the current challenges facing the field and conclude by discussing aspects of MN design which serve to enhance their performance when monitoring different classes of analytes.

Fluorescent Enzymatic Sensor Based Glucose Oxidase Modified Bovine Serum Albumin-Gold Nanoclusters for Detection of Glucose

An enzymatic fluorescent probe is developed for the selective detection of glucose. In this work, a Bovine Serum Albumin stabilized gold nanocluster (BSA-AuNCs) was synthesized by microwave assisted method, and it is modified with glucose oxidase, thereby a fluorescent enzymatic sensor (BSA-AuNCs@GoX) was designed for the sensitive detection of glucose with a limit of detection of 0.03 mM. The red fluorescence exhibited by the probe is quenched by the production of H2O2 on addition of glucose via. a static quenching mechanism from UV visible absorption and Fluorescence lifetime results. The developed probe exhibits good selectivity and sensitivity with other coexisting molecular species such as glycine, creatinine, methionine, histidine, uric acid, albumin, and ions such as sodium, potassium, calcium, magnesium, zinc etc. that appear in the body fluid. The practical applicability was studied in paper strip and extended its reproducibility in biological matrixes such as human serum and urine and found a good recovery percentage of 94-101 %. By this way, we have fabricated an effective fluorescent enzymatic "turn-off" sensing probe for the detection of glucose.

Time-resolved Fluorescence DNA-based Sensors for Reducing Background Fluorescence of Environment

The fluorescence assay is one of the popular methods that is applied for detection of different targets. However, this method may show low sensitivity and high background in biological samples due to the natural fluorescence of different compounds in complicated samples. In addition, it inevitably affects the detection results accuracy. A fundamental solution to this problem is the use of the time-resolved fluorescence technique (TRF). The main component of this technique is the use of long fluorescence lifetime reagents. In this review, various time-resolved fluorescent reagents such as complexes of lanthanide ions, lanthanide-doped inorganic nanoparticles; Mn-doped ZnS quantum dots (QDs) and pyrene excimer are introduced. Moreover, TRF sensors, especially TRF aptasensors (DNA-based sensors) are discussed. This review will give new ideas for researchers to develop novel high-sensitive TRF sensors that can remove or decrease background fluorescence and use them for the detection of various targets in complicated samples without treatment.

Recent Advances in Applications of Oxidases and Peroxidases Polymer-Based Enzyme Biocatalysts in Sensing and Wastewater Treatment: A Review

Oxidase and peroxidase enzymes have attracted attention in various biotechnological industries due to their ease of synthesis, wide range of applications, and operation under mild conditions. Their applicability, however, is limited by their poor stability in harsher conditions and their non-reusability. As a result, several approaches such as enzyme engineering, medium engineering, and enzyme immobilization have been used to improve the enzyme properties. Several materials have been used as supports for these enzymes to increase their stability and reusability. This review focusses on the immobilization of oxidase and peroxidase enzymes on metal and metal oxide nanoparticle-polymer composite supports and the different methods used to achieve the immobilization. The application of the enzyme-metal/metal oxide-polymer biocatalysts in biosensing of hydrogen peroxide, glucose, pesticides, and herbicides as well as blood components such as cholesterol, urea, dopamine, and xanthine have been extensively reviewed. The application of the biocatalysts in wastewater treatment through degradation of dyes, pesticides, and other organic compounds has also been discussed.

Recent advances in quantum dot-based fluorescence-linked immunosorbent assays

Fluorescence immunoassays have been given considerable attention among the quantitative detection methods in the clinical medicine and food safety testing fields. In particular, semiconductor quantum dots (QDs) have become ideal fluorescent probes for highly sensitive and multiplexed detection due to their unique photophysical properties, and the QD fluorescence-linked immunosorbent assay (FLISA) with high sensitivity, high accuracy, and high throughput has been greatly developed recently. In this manuscript, the advantages of applying QDs to FLISA platforms and some strategies for their application to in vitro diagnostics and food safety are discussed. Given the rapid development of this field, we classify these strategies based on the combination of QD types and detection targets, including traditional QDs or QD micro/nano-spheres-FLISA, and multiple FLISA platforms. In addition, some new sensors based on the QD-FLISA are introduced; this is one of the hot spots in this field. The current focus and future direction of QD-FLISA are also discussed, which provides important guidance for the further development of FLISA.

Ultrasensitive Hybridization Chain Reaction-Assisted Multisite Exonuclease III Amplification Strategy Combined with a Direct Quantitative Fluorescence Lateral Flow Technique for Multiple Bacterial 16S rRNA Detection

Accurate and in-time detection of bacteria conduces to preventing their rapid spread around the environment, while a nucleic acid test (NAT) is a powerful tool for early diagnosis of pathogens. Herein, we propose a hybridization chain reaction (HCR)-mediated multisite exonuclease III (Exo-III) amplification strategy (HCR/Exo-III amplifier) to achieve the one-pot and ultrasensitive isothermal amplification of bacterial 16S rRNA and a portable fluorescence detection device (PFD) to directly read signals in a lateral flow assay (LFA). In detail, the target-initiated HCR products present multiple binding sites for triggering the Exo-III amplifier that produces numerous target amplicons. Following that, the target amplicons travel up on the strip and bridge between the DNA-CdTe/CdS probes and the capture DNA to form a positive fluorescence line. After that, the strip is inserted into the PFD to accomplish the fluorescence signal reading. The constructed HCR/Exo-III amplifier-based PFD-LFA implemented the simultaneous and specific detection of three bacteria with a detection limit of a few tenths of fM for synthetic 16S rRNA fragments and dozens of CFU/mL for Staphylococcus aureus, Listeria monocytogenes, and Salmonella typhimurium in pure cultures. The sensing platform features isothermal amplification, convenient operation, and good economy, displaying great potential for on-site testing toward multiple nucleic acid analytes.

New solid-state membrane and coated wire potentiometric sensors for the determination of Zn(II) ions based on nanoparticles

The first, novel solid-state membrane sensor for Zn(II) determination is developed based on ZnS nanoparticles. ZnS nanoparticles are synthesized by chemical co-precipitation and investigated via X-ray diffraction, transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR) and impedance study. X-ray diffraction shows that the prepared ZnS nanoparticles have an average domain size of 5.72 nm, which is very close to the particle size obtained from TEM observations (6.30 nm). The ZnS nanoparticles are pressed into disks and examined as electroactive solid-state membrane. Solid-state membrane and coated wire sensors are fabricated. They display linear responses over concentration ranges of 1.0 × 10^-5 to 1.0 × 10^-1 mol L^-1 Zn²⁺ ions with cationic slopes of 28.9±0.2 and 25.9±0.2 mV decade^-1 for the solid-state membrane and coated wire sensors, respectively. The lower limits of detection are 2.86 × 10^-6 and 4.60 × 10^-6 mol L^-1 Zn²⁺ ions for the solid-state membrane and coated wire sensors, respectively. The response time for the two sensors is instantaneous (1 s), and the useful lifetimes for the solid-state membrane and coated wire sensors are long (10 and 6 months, respectively). The solid-state membrane sensor is utilized for the quantification of Zn(II) ions in brass alloys and pharmaceutical preparations.

A mesoporous silica-based probe with a molecularly imprinted polymer recognition and Mn:ZnS QDs@rhodamine B ratiometric fluorescence sensing strategy for the analysis of 4-nitrophenol

In this study, a mesoporous silica fluorescence probe co-doped with manganese-doped zinc sulfide quantum dots (Mn:ZnS QDs) and rhodamine B (RB) and coated with molecularly imprinted polymer (MIP) has been prepared by sol-gel methods. The morphology and structure were characterized in detail by transmission electron microscopy (TEM), Fourier transform-infrared absorption spectroscopy (FT-IR) and ultraviolet-visible absorption spectroscopy (UV-vis). The probe exhibited two characteristic emission peaks at 411 nm and 582 nm, and the synchronous ratiometric fluorescence responses F₄₁₁/F₅₈₂ to different concentrations of 4-nitrophenol (4-NP) showed a good linear correlation in the range of 0.01-10 μmol L^-1 besides achieving the sensitive detection of 4-NP with a detection limit as low as 3.0 nmol L^-1 (3σ). The probe possesses the advantages of selectivity toward the target molecular structure, self-stability in the detection time domain and anti-interference ability, exhibiting excellent potential for application in 4-NP detection in different water environments.

Luminescent alloyed quantum dots for turn-off enzyme-based assay

A new bioanalytical labeling system based on alloyed quantum dots' (QDs) photoluminescence quenching caused by an enzymatic reaction has been developed and tested for the first time. The catalytic role of the enzyme provides high sensitivity and the possibility of varying detecting time to improve assay sensitivity. Alloyed luminescent QDs were chosen in view of their small size (5-7 nm) and the high sensitivity of their optical properties to physicochemical interactions. Here, we described the synthesis of alloyed luminescent QDs and demonstrated the possibility of using them as a luminescent turn-off substrate for enzymatic assay. Synthesized alloyed QDs were found to be a sensitive turn-off substrate for glucose oxidase in homogeneous and heterogeneous assay models. CdZnSeS and CdZnSeS/ZnS QDs covered with dihydrolipoic acid and 2-mercaptoethanol were tested. A glucose oxidase limit of detection of 6.6 nM for the heterogenous high-throughput model assay was reached.

Synthesis of bio-templated clickable quantum dots and dual-emitting organic/inorganic complex for ratiometric fluorescence visual assay of blood glucose

With the prevalence of diabetes, rapid and simple blood glucose monitoring becomes more and more important. Here, we reported the synthesis of the bio-templated N3-CdZnTeS quantum dots (QDs), which was...

Biostack: Nontoxic Metabolite Detection from Live Tissue

There is increasing demand for direct in situ metabolite monitoring from cell cultures and in vivo using implantable devices. Electrochemical biosensors are commonly preferred due to their low-cost, high sensitivity, and low complexity. Metabolite detection, however, in cultured cells or sensitive tissue is rarely shown. Commonly, glucose sensing occurs indirectly by measuring the concentration of hydrogen peroxide, which is a by-product of the conversion of glucose by glucose oxidase. However, continuous production of hydrogen peroxide in cell media with high glucose is toxic to adjacent cells or tissue. This challenge is overcome through a novel, stacked enzyme configuration. A primary enzyme is used to provide analyte sensitivity, along with a secondary enzyme which converts H₂ O₂ back to O₂ . The secondary enzyme is functionalized as the outermost layer of the device. Thus, production of H₂ O₂ remains local to the sensor and its concentration in the extracellular environment does not increase. This "biostack" is integrated with organic electrochemical transistors to demonstrate sensors that monitor glucose concentration in cell cultures in situ. The "biostack" renders the sensors nontoxic for cells and provides highly sensitive and stable detection of metabolites.

A Facile Approach for Elemental-Doped Carbon Quantum Dots and Their Application for Efficient Photodetectors

The present work demonstrates a facile hydrothermal approach to synthesize lanthanide-doped carbon quantum dots (CQDs) with europium and/or gadolinium elements. Taking the advantage of broadband adsorption in the ultraviolet-visible region, the doped QDs are directly used as building blocks for photo-electrochemical (PEC)-type photodetectors (PDs) and their performance is systematically investigated under various conditions. The europium (Eu) and gadolinium (Gd) co-doped (C:EuGd) QDs exhibit better photo-response than the single-elemental doped ones and also show outstanding long-term stability. According to the apparent response to light from 350 to 400 nm, the C:EuGd QDs are demonstrated to hold great potential for narrow-band PDs. This work highlights the practical applications of lanthanide-doped CQDs for PDs, and the results are beneficial for the development of elemental-doped CQDs in general.

Surface-Modified Colloid CdTe/CdS Quantum Dots by a Biocompatible Thiazolidine Derivative as Promising Platform for Immobilization of Glucose Oxidase: Application to Fluorescence Sensing of Glucose

This work focuses on the synthesis of novel modified core-shell CdTe/CdS quantum dots (QDs) and develops as a fluorescence sensor for glucose determination. The (E)-2,2'-(4,4'-dioxo-2,2'-dithioxo-2H,2'H-[5,5'-bithiazolylidene]-3,3'(4H,4'H)-diyl)bis(3- mercaptopropanoic acid) (DTM) as a new derivative of thiazolidine was synthesized and characterized and used to surface-modification of CdTe/CdS QDs. DTM-capped CdTe/CdS QDs used to immobilization of glucose oxidase (GOD). The intensity fluorescence emission of the CdSe/CdS-DTM/GOD is highly sensitive to the concentration of H₂O₂ as a byproduct of the catalytic oxidation of glucose. The experimental results showed that the quenched fluorescence was proportional to the glucose concentration within the range of 10 nM-0.32 μM under optimized experimental conditions. The limit of detection of this system was found to be 4.3 nM. Compared with most of the existing methods, this newly developed system possesses many advantages, including simplicity, low cost, and good sensitivity.

Light emitting probes – approaches for interdisciplinary applications

Luminescent probes are key components of sensors to detect numerous bio- and chemical-analytes with high sensitivity and specificity. Sensing is the response of events like self-immolation, FRET, electron/charge transfer, etc. upon interaction.

Novel Method of Clickable Quantum Dot Construction for Bioorthogonal Labeling

Bioorthogonal chemistry has been considered as a powerful tool for biomolecule labeling due to its site specificity, moderate reaction conditions, high yield, and simple post-treatment. Covalent coupling is commonly used to modify quantum dots (QDs) with bioorthogonal functional group (azide or cycloalkyne), but it has a negative effect in the decrease of QDs' quantum yield and stability and increase of QDs' hydrodynamic diameter. To overcome these disadvantages, we propose a novel method for the preparation of two kinds of clickable QDs by the strong interaction of -SH with metal ions. One system involves azide-DNA-functionalized QDs, which are used for bioconjugation with dibenzocyclooctyne (DBCO)-modified glucose oxidase (GOx) to form a GOx-QDs complex. After bioconjugation, the stability of QDs was improved, and the activity of GOx was also enhanced. The GOx-QDs complex was used for rapid detection of blood glucose by spectroscopy, naked eye, and paper-based analytical devices. The second system involves DBCO-DNA-functionalized QDs, which are used for an in situ bioorthogonal labeling of HeLa cells through metabolic oligosaccharide engineering. Therefore, these clickable QDs based on DNA functionalization can be applied for rapid and effective labeling of biomolecules of interest.

Photoelectrochemical enzymatic sensor for glucose based on Au@C/TiO2 nanorod arrays

In this work, a photoelectrochemical (PEC) glucose biosensor was synthesized on the basis of a type of Au@C/TiO₂ composite by using an unsophisticated secondary hydrothermal strategy. The compounded Au@C/TiO₂ material was characterized by XRD, SEM, TEM, UV-vis, and XPS to identify the composition and the purity of the phase. Glucose oxidase (GODx) was immobilized on the Au@C/TiO₂. The PEC biosensor presented satisfactory stability and outstanding reproducibility. The range and the sensitivity of the linear measurement were 0.1–1.6 mM and 29.76 μA mM⁻¹ cm⁻², respectively, and the detection limit was low (0.049 mM). The GODx/Au@C/TiO₂/FTO biosensor presented excellent efficiency in detecting glucose, suggesting the great potential application of this synthesized material in PEC biosensors.

In this work, a photoelectrochemical (PEC) glucose biosensor was synthesized on the basis of a type of Au@C/TiO₂ composite by using an unsophisticated secondary hydrothermal strategy.

A convenient and rapid method for detecting d-glucose in honey used smartphone

Information concerning food composition, including information on its glucose content, is essential for modern food industry due to greater consumer awareness and expectations. In this work, the gene encoding d-glucose dehydrogenase (GDH) from Bacillus Natto was expressed in Escherichia coli BL21(DE3) firstly. Ni-IDA column was used for the purification of GDH. Then, the purified GDH was used to construct a color system with stable and effective measurement of concentration of d-glucose. The smart phone photographing and the software Microsoft Photoshop have been used in the system for determination of the color. The enzymatic analysis system can detect the concentration of d-glucose from 5 mM to 40 mM, and other various sugars has no interference to the system. The system was used to quantitatively detect the concentration of d-glucose in honey. The system can be used for convenient and rapid detection of d-glucose in food, especially for large numbers of samples.

Preparation of galactose oxidase functional phosphorescent quantum dots and detection of D-galactose

Environmental friendly nano biosensor can improve the detection performance of traditional biomolecular sensors and have important application value in practical applications. In this study, a kind of room temperature phosphorescence (RTP) quantum dots (QDs) (GOX RTP QDs) nanobiosensor was prepared by mineralization at room temperature (25 °C), using galactose oxidase (GOX) as template, which improved the catalytic ability of traditional GOx to D-Galactose. The specific enzyme substrate reaction between GOx and D-Galactose and photoinduced electron transfer (Piet) were used to detect the RTP of D-galactose. The linear range of D-galactose detection is 0.02-0.8 mM, and the detection limit of the method is 0.008 mM. This method is based on the RTP property of QDs, which can effectively avoid the interference of background fluorescence of biological samples, and does not need complex sample pretreatment process. Therefore, this method is more suitable for the quantitative detection of D-Galactose in biological samples.

Detection of biological mercaptan by DNA functionalized room temperature phosphorescent quantum dot nanocomposites

In this study, green low-toxicity Mn-doped Zns (Mn-Zns) room-temperature phosphorescent (RTP) quantum dots (QDs) (PQDs) nanocomposites (DNA-PQDs) were prepared under the optimal conditions by using single-stranded DNA (PS-C-ssDNA) rich of cytosine C and Thioguanine G (PS) as the template. DNA-PQDs interact with Ag⁺ to form AgN bonds and further produce C-Ag⁺-C conjugates. As a result, DNA-PQDs cluster together and induce the phosphorescent exciton energy transfer (PEET), resulting in quenching of room-temperature phosphorescent of DNA-PQDs. Nevertheless, Ag⁺ tends to form AgS bonds with biological mercaptan when it is added in, so that Ag⁺ falls from C-Ag⁺-C. DNA-PQDs changed from aggregation to looseness and RTP is recovered accordingly. On this basis, RTP detection of biological mercaptan is realized. Since this sensor system has RTP properties based on DNA-PQDs, it is very applicable to detection of mercaptan compounds in biological fluids.

Turning on solid-state phosphorescence of platinum acetylides with aromatic stacking

Neat solids that phosphoresce under ambient conditions are rare due to aggregation-caused quenching. This communication describes a platinum acetylide (PtPE) that phosphoresces as a solid due to programmed aromatic stacking interactions of pendant groups that prevent intermolecular aggregation.

CdS quantum dots embedded in PVP: Inorganic phosphate ion sensing in real sample and its antimicrobial activity

Polyvinyl-pyrrolidone capped spherical cadmium sulphide quantum dots (CdS-PVP QDs), 2-6 nm in size, were developed as a selective turn-on fluorescence nanosensor for monohydrogen phosphate ion (HPO₄^2-) in aqueous medium. Fluorescence intensity of CdS-PVP QDs significantly increased with addition of HPO₄^2- ions, whereas the other common inorganic ions had very little effect on the fluorescence intensity. The proposed sensor may be efficiently used for the detection of HPO₄^2- ions at a low level of concentration up to 213 nM in real urine sample. Cell imaging study indicates that the CdS-PVP QDs are cell permeable and can detect the intracellular distribution of HPO₄^2- ions under fluorescence microscope. The CdS-PVP QDs showed considerable activity against Staphylococcus aureus also.

Double-Emission Ratiometric Fluorescent Sensors Composed of Rare-Earth-Doped ZnS Quantum Dots for Hg2+ Detection

Quantum dots (QDs) are a class of zero-dimensional nanocrystal materials, whose lengths are limited to 2-10 nm. Their unique advantages such as wide excitation spectra, narrow emission spectra, and high quantum yield make their application possible in fluorescence sensing, wherein QDs such as CdSe, CdTe, and CdS are used. Indeed, QDs have a wide range of applications in fluorescence sensing, and there have been many reports of applications based on QDs as ion probes. The emission spectra of QDs can be adjusted by changing the size of the QDs or doping them with other ions/elements. However, the high toxicity of Cd and the poor anti-interference ability of single-emission fluorescent probes greatly limit the applications of QDs in many fields. In this paper, ZnS QDs are doped with the rare-earth element Ce to form a low-toxicity double-emission ratiometric fluorescent sensor, ZnS:Ce, for Hg²⁺ detection. The results of transmission electron microscopy (TEM), X-ray diffractometry, X-ray photoelectron spectroscopy, and optical spectroscopy show that ZnS:Ce QDs were successfully synthesized. Under the optimal conditions, the concentration of Hg²⁺ was in the range of 10-100 μM, which had a linear relationship with the fluorescence intensity of the ZnS:Ce QDs: the linear correlation coefficient was 0.998, and the detection limit was 0.82 μM L^-1. In addition, the fluorescent sensor had good selectivity for Hg²⁺, and it was successfully applied to the detection of Hg²⁺ in laboratory water samples.

Ti3C2Tx MXene-derived TiO2/C-QDs as oxidase mimics for the efficient diagnosis of glutathione in human serum

A Ti₃C₂T_x MXene-derived TiO₂/C-QD oxidase mimic was developed and used for the efficient diagnosis of glutathione in human serum.

Glucose Oxidase-Instructed Traceable Self-Oxygenation/Hyperthermia Dually Enhanced Cancer Starvation Therapy

Cancer theranostics based on glucose oxidase (GOx)-induced starvation therapy has got more and more attention in cancer management. Herein, GOx armed manganese dioxide nanosheets (denoted as MNS-GOx) were developed as cancer nanotheranostic agent for magnetic resonance (MR)/photoacoustic (PA) dual-modal imaging guided self-oxygenation/hyperthermia dually enhanced starvation cancer therapy. The manganese dioxide nanomaterials with different morphologies (such as nanoflowers, nanosheets and nanowires) were synthesized by a biomimetic approach using melanin as a biotemplate. Afterwards, the manganese dioxide nanosheets (MNS) with two sides and large surface area were selected as the vehicle to carry and deliver GOx. The as-prepared MNS-GOx can perform the circular reaction of glucose oxidation and H2O2 decomposition for enhanced starvation therapy. Moreover, the catalytic activity of GOx could be further improved by the hyperthermia of MNS-GOx upon near-infrared laser irradiation. Most intriguingly, MNS-GOx could achieve "turn-on" MR imaging and "turn-off" PA imaging simultaneously. The theranostic capability of MNS-GOx was evaluated on A375 tumor-bearing mice with all tumor elimination. Our findings integrated molecular imaging and starvation-based synergistic cancer therapy, which provided a new platform for cancer nanotheranostics.

Current Trends of Nanobiosensors for Point-of-Care Diagnostics

In order to provide better-quality health care, it is very important that high standards of health care management are achieved by making timely decisions based on rapid diagnostics, smart data analysis, and informatics analysis. Point-of-care testing ensures fast detection of analytes near to the patients facilitating a better disease diagnosis, monitoring, and management. It also enables quick medical decisions since the diseases can be diagnosed at an early stage which leads to improved health outcomes for the patients enabling them to start early treatment. In the recent past, various potential point-of-care devices have been developed and they are paving the way to next-generation point-of-care testing. Biosensors are very critical components of point-of-care devices since they are directly responsible for the bioanalytical performance of an essay. As such, they have been explored for their prospective point-of-care applications necessary for personalized health care management since they usually estimate the levels of biological markers or any chemical reaction by producing signals mainly associated with the concentration of an analyte and hence can detect disease causing markers such as body fluids. Their high selectivity and sensitivity have allowed for early diagnosis and management of targeted diseases; hence, facilitating timely therapy decisions and combination with nanotechnology can improve assessment of the disease onset and its progression and help to plan for treatment of many diseases. In this review, we explore how nanotechnology has been utilized in the development of nanosensors and the current trends of these nanosensors for point-of-care diagnosis of various diseases.

Cu-doped quantum dots: a new class of near-infrared emitting fluorophores for bioanalysis and bioimaging

Transition metal ion-doped quantum dots (QDs) exhibit unique optical and photophysical properties that offer significant advantages over undoped QDs, such as larger Stokes shift to avoid self-absorption/energy transfer, longer excited-state lifetimes, wider spectral window, and improved chemical and thermal stability. Among the doped QDs emitters, Cu is widely introduced into the doped QDs as novel, efficient, stable, and tunable optical materials that span a wide spectrum from blue to near-infrared (NIR) light. Their unique physical and chemical characteristics enable the use of Cu-doped QDs as NIR labels for bioanalysis and bioimaging. In this review, we discuss doping mechanisms and optical properties of Cu-doped QDs that are capable of NIR emission. Applications of Cu-doped QDs in in vitro biosensing and in in vivo bioimaging are highlighted. Moreover, a prospect of the future of Cu-doped QDs for bioanalysis and bioimaging are also summarized.

A novel ultrasensitive and non-enzymatic "turn-on-off" fluorescence nanosensor for direct determination of glucose in the serum: As an alternative approach to the other optical and electrochemical methods

A new, simple, rapid, highly sensitive and selective and non-enzymatic fluorometric method for direct determination of glucose in real samples was developed. The method was based on the inhibition of fluorescence resonance energy transfer (FRET) process between terbium (III)-1, 10-phenanthroline (Tb-phen) complex and silver nanoparticles (AgNPs). Upon the addition of glucose, the quenched FRET-based fluorescence of Tb-phen complex was gradually recovered by glucose via its strong adsorption on the surface of AgNPs and removal of Tb-phen complex from AgNPs surface. Therefore the fluorescence of Tb-phen complex switched to "turn-on" state. Under the optimum conditions, a linear relationship was obtained between the enhanced fluorescence intensity and glucose concentration in the range of (5-900) × 10^-8 M with the detection limit of 1.94 × 10^-8 M. The proposed sensing system was successfully applied to determine glucose in the spiked normal and diabetic patient serum samples after deproteinization with acetonitrile. Analytical recoveries from treated serum samples were in the range of 99.97-104.80% and 92.14-105.43%, respectively. The common interfering species, such as ascorbic acid, fructose and galactose did not cause interior interference due to unique emission properties of Tb-phen complex probe. Also the interaction of the Tb-phen complex with AgNPs, which led to the fluorescence intensity quenching of the complex, was further examined by FTIR technique. In short, as compared to most of the existing methods, the newly proposed method, provides some advantages and makes it promising for the direct rapid screening of glucose residues of real samples in clinical diagnosis of diabetes, as an alternative approach to the other exiting optical and electrochemical methods.

Optical Sensors Based on II-VI Quantum Dots

Fundamentals of quantum dots (QDs) sensing phenomena show the predominance of these fluorophores over standard organic dyes, mainly because of their unique optical properties such as sharp and tunable emission spectra, high emission quantum yield and broad absorption. Moreover, they also indicate no photo bleaching and can be also grown as no blinking emitters. Due to these properties, QDs may be used e.g., for multiplex testing of the analyte by simultaneously detecting multiple or very weak signals. Physico-chemical mechanisms used for analyte detection, like analyte stimulated QDs aggregation, nonradiative Förster resonance energy transfer (FRET) exhibit a number of QDs, which can be applied in sensors. Quantum dots-based sensors find use in the detection of ions, organic compounds (e.g., proteins, sugars, volatile substances) as well as bacteria and viruses.

-Phosphorescent Mesoporous Surface Imprinting Microspheres: Preparation and Application for Transferrin Recognition from Biological Fluids

The relationship between the thickness of surface molecularly imprinted polymers (MIPs) and specific recognition performance of transferrin (Trf) as well as the quantitative relation between the grafting amount of Mn-ZnS room-temperature phosphorescence (RTP) quantum dots (QDs) (short for PQDs) and RTP signals for recognition of Trf was analyzed in this study. Based on analysis results, RTP protein mesoporous imprinting microspheres (SiO₂-PQDs-MIPs) with high specificity and strong interference resistance were developed using a mesoporous SiO₂ nanomaterial that can create more three-dimensional precise recognition sites as the matrix and using PQDs with strong resistance to background fluorescence interference as the luminescent materials. A discriminatory analysis of Trf was realized by the phosphorescence quenching principle based on light quenching caused by the photoinduced electron transfer. The concentration range, limit of detection, relative standard deviation, and imprinting factor of Trf detection under pH 7.4 are 0.05-1.0 μM, 0.014 μM, 3.23%, and 3.09, respectively. Although the sensing signals of SiO₂-PQDs-MIPs for proteins are based on the phosphorescence of PQDs, they are particularly suitable for specific recognition and accurate quantitative detection of proteins in biological fluids. Research conclusions are expected to realize high-efficiency recognition of target proteins in actual biological samples.

An "off-on" phosphorescent aptasensor for the detection of thrombin based on PRET

Thrombin plays an important role in the blood coagulation cascade and it stimulates the process of platelet aggregation. Herein, we developed a highly efficient and sensitive phosphorescent aptasensor system for the quantitative analysis of thrombin. The phosphorescence of 3-mercaptopropionic acid capped Mn-doped ZnS quantum dots (MPA-Mn:ZnS QDs) was gradually quenched with the addition of thrombin binding aptamers-BHQ2 (TBA-BHQ2) based on phosphorescence resonance energy transfer (PRET). With the addition of the target analyte thrombin into the system, TBA-BHQ2 could change its spatial structure from a random coil to an antiparallel G-quadruplex which resulted from the combination of thrombin and TBA-BHQ2, leading to the phosphorescence recovery. Finally, the concentration of thrombin could be accurately determined by means of measuring the phosphorescence intensity change value (ΔP). The limit of detection (LOD) was obtained as low as 15.26 pM with wide linear ranges both from 60 to 2000 pM and from 2 to 900 nM. The proposed strategy was also successfully applied for thrombin detection in human serum samples and plasma samples with satisfactory recoveries from 96% to 99% and 95% to 104%, respectively. The long lifetime of phosphorescent QDs possessed a suitable time delay to eliminate autofluorescence and scattered light interference from biological matrices effectively. Thus, the signal to noise ratio of the phosphorescent aptasensor was improved visibly for the analysis of target analytes.

Preparation of DNA functional phosphorescent quantum dots and application in melamine detection in milk

Bio-functionalization of quantum dots (QDs) is of important value in practical applications. With single-stranded DNA (ssDNA) rich in thymine T and thioguanine G taken as the template, a new-type nanocomposite material (ssDNA-PQDs) synthesized from low-toxicity T-ssDNA functionalized Mn–ZnS and room-temperature phosphorescent (RTP) QDs (PQDs) was prepared in this paper by optimizing synthesis conditions, and these ssDNA-PQDs could emit orange RTP signals at 590 nm. As these ssDNA-PQDs are rich in T sequences and T sequences can bond with melamine through the hydrogen-bond interaction, ssDNA-PQDs experience aggregation, thus causing phosphorescent exciton energy transfer (PEET) between ssDNA-PQDs of different particle sizes and their RTP quenching. Based on this principle, an RTP detection method for melamine was established. The linear range and detection limit of the detection method are 0.005–6 mM and 0.0016 mM respectively. As this method is based on the RTP nature of ssDNA-PQDs, it can avoid disturbance from background fluorescence and scattered light of the biological fluid, and it is very suitable for melamine detection in the biological fluid milk.

Preparation of phosphorescent quantum dots taking single-stranded DNA as a template and their application to melamine detection in milk.

A conjugated carbon-dot–tyrosinase bioprobe for highly selective and sensitive detection of dopamine

A conjugated carbon-dot–tyrosinase bioprobe was first designed and applied for sensitive and selective dopamine detection in human serum.

Detection of specific DNA sequences in Maize (Zea mays L.) based on phosphorescent quantum-dot exciton energy transfer

The complementary sequence of genetically-modified marker sequence cauliflower mosaic virus 35S promoter (Ca MV 35S) DNA was trimmed and designed into sequences S1 and S2, which were separately modified onto the surfaces of room-temperature phosphorescent (RTP) quantum dots (QDs), forming QDs-S1 (P1) and QDs-S2 (P2), respectively.