Quantitative capillary electrophoresis/ion spray tandem mass spectrometry determination of EDTA in human plasma and urine

Selective Plate-Based Assay for Trace EDTA Analysis via Boron Trifluoride-methanol Derivatization UHPLC-QqQ-MS/MS Enabling Biologic and Vaccine Processes

The employment of ethylenediaminetetraacetic acid (EDTA) across several fields in chemistry and biology has required the creation of a high number of quantitative assays. Nonetheless, the determination of trace EDTA, especially in biologics and vaccines, remains challenging. Herein, we introduce an automated high-throughput approach based on EDTA esterification in 96-well plates using boron trifluoride-methanol combined with rapid analysis by ultra-high-performance liquid chromatography-triple quadrupole tandem mass spectrometry (UHPLC-QqQ-MS/MS). Derivatization of EDTA to its methyl ester (Me-EDTA) serves to significantly improve chromatographic performance (retention, peak shape, and selectivity), while also delivering a tremendous enhancement of sensitivity in the positive ion mode electrospray ionization (ESI+). This procedure, in contrast to previous EDTA methods based on complexation with metal ions, is not affected by high concentration of other metals, buffers, and related salts abundantly present in biopharmaceutical processes (e.g., iron, copper, citrate, etc.). Validation of this assay for the determination of ng·mL^-1 level EDTA in monoclonal antibody and vaccine products demonstrated excellent performance (repeatability, precision, and linear range) with high recovery from small sample volumes while also providing an advantageous automation-friendly workflow for high-throughput analysis.

Fragmentation behavior of EDTA complexes under different activation conditions

Ethylenediaminetetraacetic acid (EDTA) is an aminopolycarboxylic acid and complexation agent that is able to bind a large variety of metals. The formation of highly stable metal-EDTA complexes is generally very quick. This has led to the use of EDTA in a variety of applications, including food, medical, and household applications. In the current study, we have investigated the fragmentation behavior of EDTA and various metal complexes under collision-induced dissociation (CID), infrared-multiphoton dissociation (IRMPD), and higher-energy collisional dissociation (HCD) activation conditions. Both, positive and negative mode electrospray ionization (ESI) were applied. The metals used to complex with EDTA ranged from alkaline earth metals, such as sodium and cesium, via calcium, nickel, zinc, aluminum, copper, iron, and indium to yttrium and several lanthanides. Furthermore, the protonated and deprotonated species of EDTA, as well as disodium and trisodium species, have been subjected to fragmentation. The results show that characteristic fragmentations were obtained for EDTA and the metal complexes under the investigated conditions. The use of an ion cyclotron resonance (ICR) and an Orbitrap mass spectrometer, as high resolution-accurate mass instruments, allowed the assignment of elemental compositions undoubtedly for the vast majority of fragments. Certain trends were observed that trend correlated with the size of the metal and the location within the periodic table.

Effect of EDTA on measurement of cortisol and thyroxine by chemiluminescent enzyme immunoassay in dogs

The addition of ethylenediamine tetra-acetic acid (EDTA) to serum can affect the measurement of cortisol by chemiluminescent enzyme immunoassay (CEIA); addition of magnesium chloride (MgCl₂) may reverse the effects. However, similar characteristics for thyroxine (T4) measurement are unknown. We measured cortisol and T4 in paired EDTA-anticoagulated plasma and serum samples from 50 dogs. Additionally, both hormones were measured in 15 samples of each type after the addition of MgCl₂. Samples were collected under routine clinical conditions; therefore, specific EDTA concentrations in plasma samples were unknown. Cortisol and T4 values were significantly different comparing plasma and serum samples in the absence of MgCl₂. For cortisol and T4, EDTA-plasma concentrations were 51.2% and 43.7% higher than serum, respectively (p < 0.001 for both). The addition of MgCl₂ to plasma significantly decreased the measured cortisol concentrations (p < 0.001) but not T4 (p = 0.44). After addition of MgCl₂, cortisol concentrations in EDTA-plasma were no longer significantly different from serum, whereas T4 concentrations in EDTA-plasma remained significantly different from serum. In the clinical setting in which tubes may be underfilled, use of EDTA-plasma significantly increases the measured concentration of cortisol and T4 obtained by CEIA. Addition of MgCl₂ to EDTA-plasma can overcome the effects of EDTA when measuring cortisol, but not T4. Thus, T4 should not be measured in EDTA-plasma.

kEDTA Sample Contamination: A Reappraisal

BACKGROUND

Potassium EDTA (kEDTA) contamination of serum samples is common, causing spurious hyperkalemia, hypozincemia, and hypocalcemia that if unrecognized may adversely affect patient care. Gross kEDTA contamination is easy to detect, but identification of spurious electrolytes due to small amounts of contamination requires measurement of serum EDTA. We validated an EDTA assay on the Abbott Architect and reassessed its value in identifying kEDTA contamination and in studying mechanisms for contamination.

METHODS

Within- and between-batch imprecision, linearity, recovery, interference, and carryover were assessed. Serum supplemented with k₂EDTA plasma, to mimic sample contamination, was used to study its effect on potassium, calcium, zinc, magnesium, and alkaline phosphatase. Our current laboratory protocol for identification of kEDTA contamination, based on measurement of serum calcium, was compared to that of EDTA measurement.

RESULTS

The EDTA assay displayed acceptable performance characteristics. Hemoglobin was a positive interferent. EDTA was detectable in serum contaminated with 1% (v:v) k₂EDTA plasma. An increase in serum potassium of 0.54 mmol/L (11.9%) was observed at a measured EDTA concentration of 0.19 mmol/L, equivalent to 3.2% (v:v) contamination. At this EDTA concentration reductions were also observed in zinc (71%), calcium (1%), alkaline phosphatase (ALP) (4%), and magnesium (2.4%). The serum EDTA assay detected contamination in 31/106 patient samples with hyperkalemia (potassium ≥6.0mmol/L), 20 of which were undetected by the current laboratory protocol.

CONCLUSIONS

The EDTA assay displayed acceptable performance, with the ability to reliably measure EDTA at low concentrations. Only a small amount of kEDTA causes significant spurious hyperkalemia and is only reliably detected with EDTA measurement.

Suitability of instant noodles for iron fortification to combat iron-deficiency anemia among primary schoolchildren in rural Vietnam

BACKGROUND

Anemia is a significant public health problem among schoolchildren in Vietnam. Food fortification is considered one of the most sustainable long-term strategies to control iron-deficiency anemia in Vietnam. The success of a food-fortification program depends on the choice of the food vehicle.

OBJECTIVES

The aim of the present study was to identify an appropriate vehicle for iron fortification to be used in a school-feeding program aimed at improving the iron and anemia status of schoolchildren in rural Vietnam.

METHODS

Children 6 to 8 years of age in two primary schools in Tam Nong District, Phu Tho Province, and their parents were included in this study. The study consisted of three substudies: a food-consumption study with 24-hour recalls of two nonconsecutive days; a food-beliefs study, with focus group discussions, a pile-sorting test, and a food attributes and differences exercise; and a food-acceptance study using noodles and biscuits fortified with sodium iron ethylenediaminetetraacetic acid (NaFeEDTA).

RESULTS

The average number of meals consumed daily was 3.2 +/- 0.4, and the average intakes of energy and iron were 1,218 +/- 406 kcal and 7.5 +/- 4.0 mg, respectively. Compared with biscuits and instant rice soup, instant noodles were consumed more frequently and in larger portion sizes and are more acceptable as children's food in the culture of the local people. The iron level of the fortified product did not affect the mean consumption of noodles, but a higher level of iron was associated with a lower mean consumption of biscuits (p < .05). The production process did not affect the NaFeEDTA level in noodles; however, during preparation at least 70% of the iron is leaked into the soup.

CONCLUSIONS

Instant noodles are a suitable vehicle for iron fortification for use in school-based intervention to improve iron-deficiency anemia among primary schoolchildren in rural Vietnam.

An investigation of peak-broadening effects arising when combining CE with MS

In this study, peak-broadening effects caused by nebulizing gas flow and lack of temperature control have been investigated for separation capillaries with three different inner diameters. The study was performed with serial UV/ESI-MS detection in an effort to distinguish between peak broadening arising in the separation and peak broadening arising in the ion source. The nebulizing gas was found to significantly affect both migration time and separation efficiency when using capillaries with 50 and 75 microm id. If the nebulizing gas is on during injection, the injection volume increases to such an extent that significant peak broadening is induced. Reducing the id to 25 microm minimizes the parabolic flow induced by the nebulizing gas. Results indicate that the nebulizing gas pressure can be optimized to minimize peak broadening in the ion source. A decrease in detection sensitivity, possibly related to the orthogonal design of the interface, was observed when the nebulizing gas pressure was increased. A tapered capillary tip was found to provide superior separation efficiency as well as sensitivity.

The effect of iron fortification and de-worming on anaemia and iron status of Vietnamese schoolchildren

Previous data from Vietnam show that anaemia is highly prevalent among schoolchildren, who are considered not to be iron deficient.Trichurisinfection doubled the risk of anaemia. The present study aimed to evaluate the hypothesis that de-worming is more effective than iron fortification in an anaemic, infection-prone population. In a trial with a 2 × 2 factorial design, 425 anaemic children aged 6–8 years were randomly assigned to receive either iron-fortified noodles or placebo, and mebendazole or placebo. Outcomes considered were change in haematological indicators of iron status (Hb, serum ferritin (SF), serum transferrin receptor (TfR) and haemoglobinopathies analysis); inflammations (C-reactive protein (CRP)); parasite infection status (hookworm,TrichurisandAscarisinfection); and IgE. ANOVA and logistic regression were used to assess the effects of iron fortification and de-worming on Hb, SF, TfR, body iron and anaemia. Hb improved in all groups after 6 months of intervention. Iron fortification significantly improved Hb, SF and body iron (2·6 g/l, 16·3 μg/l and 1 mg/kg, respectively). Prevalence of elevated IgE was very high at baseline (99 %) and significantly reduced to about 75 % in all groups after intervention. De-worming unexpectedly showed no effect on Hb, iron status and IgE level. It is concluded that iron fortification slightly improved anaemia and iron status in anaemic schoolchildren in rural Vietnam that were not considered iron deficient. Chronic infection or other unidentified factors may play an important role in the seasonal reduction of anaemia seen in all treatment groups.

Determination of alternative and conventional chelating agents as copper(II) complexes by capillary zone electrophoresis--the first use of didecyldimethylammonium bromide as a flow reversal reagent

A capillary zone electrophoresis (CZE) method for analyzing 11 chelating agents [beta-alaninediacetic acid (beta-ADA), trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid (CDTA), diethylenetriaminepentaacetic acid (DTPA), ethylenediaminetetraacetic acid (EDTA), N-(2-hydroxyethyl)ethylenediamine-N,N',N'-triacetic acid (HEDTA), N-(2-hydroxyethyl)iminodiacetic acid (HEIDA), iminodiacetic acid (IDA), methylglycinediacetic acid (MGDA), nitrilotriacetic acid (NTA), 1,3-diaminopropane-N,N,N',N'-tetraacetic acid (PDTA) and triethylenetetraaminehexaacetic acid (TTHA)] as negatively charged copper(II) complexes has been established. Both conventional and alternative chelating agents were included in this study, because they are used side by side in industrial applications. In this study, didecyldimethylammonium bromide (DMDDAB) was successfully used as a flow reversal reagent for the first time in an aqueous CZE method based on phosphate BGE with UV spectrophotometric detection. In addition this new flow modifier was compared to common TTAB. Method development was done using a fused silica capillary (61 cm x 50 microm i.d.). The optimized BGE was a 105 mmol L(-1) phosphate buffer with TTAB or DMDDAB in the concentration 0.5 mmol L(-1) at pH 7.1. The measurements were done with -20 kV voltage using direct UV detection at 254 nm. In both CZE methods all 11 analyte zones were properly separated (resolutions > or =2.4), and the calibrations gave excellent correlation coefficients (> or =0.998; linear range tested 0.5-2.0 mmol L(-1)). The limits of detection were < or =34 and < or =49 micromol L(-1) with the method of DMDDAB and TTAB, respectively. A clear benefit of both methods was the short analysis time; all 11 complexes were detected in less than 6 and 5.5 min with the methods of TTAB and DMDDAB, respectively. The two methods were tested with dishwashing detergents and paper mill wastewater samples and proved to be suitable for practical use.

Microelectrospray interface with coaxial sheath flow for high-resolution capillary electrophoresis/mass spectrometry separation

We have fabricated a coaxial sheath liquid flow microelectrospray ionization (microESI) interface for capillary electrophoresis coupled with mass spectrometry (CE/MS). The ESI interface, which features a reduced probe diameter (130 microm i.d. x 174 microm o.d.) with a nebulizer-free format, can relatively easily electrospray a large amount of make-up sheath liquid (5-10 microL/min) over the long term (more than 80 runs) with a high degree of stability. The interface also provides higher separation qualities and improved detection sensitivities compared with a conventional ion spray (IS) interface.

Efficacy of iron fortification compared to iron supplementation among Vietnamese schoolchildren

The effect of iron fortification is generally assumed to be less than iron supplementation; however, the magnitude of difference in effects is not known. The present study aims to compare the efficacy of these two strategies on anaemia and iron status. After screening on low Hb, 425 anaemic children in six primary schools in Tam Nong district of Phu Tho province were included in a randomized, placebo-controlled trial comparing two groups receiving iron fortified instant noodles or iron supplementation for 6 months and a control group, with children in all groups having been dewormed. Blood samples were collected before and after intervention for haemoglobin, serum ferritin (SF), serum transferrin receptor (TfR), C-reactive protein (CRP), and haemoglobinopathies analysis. Regression analysis was used to assess the effect of iron fortification and iron supplementation on haemoglobin concentration, SF, TfR, body iron, and anaemic status as outcome variables. The improvement of haemoglobin, SF, and body iron level in the group receiving iron fortification was 42% (2.6 g/L versus 6.2 g/L), 20% (23.5 microg/L versus 117.3 microg/L), and 31.3% (1.4 mg/kg versus 4.4 mg/kg) of that in the iron supplementation group. The prevalence of anaemia dropped to 15.1% in the control group, with an additional reduction of anaemia of 8.5% in the iron supplementation group. The additional reduction due to iron fortification was 5.4%, which amounts to well over 50% of the impact of supplementation. In conclusion, the efficacy of iron fortification based on reduction of prevalence of anaemia, and on the change in haemoglobin level, is about half of the maximum impact of supplementation in case of optimal compliance. Thus, in a population of anaemic children with mild iron deficiency, iron fortification should be the preferred strategy to combat anaemia.

Tandem mass spectra of divalent metal ion adducts of glycosyl sulfides, sulfoxides and sulfones; distinction among stereoisomers

The tandem mass spectra of the divalent metal ion (Mg2+, Ca2+, Sr2+, Ba2+, Mn2+, Ni2+, Co2+ and Zn2+) adducts of acetylated 1,2-trans-glycosyl sulfides, sulfoxides and sulfones were examined using low energy collision-induced dissociation on a Quattro II quadrupole tandem mass spectrometer. Abundant doubly charged ions, such as [3M + Met]2+ and [2M + Met]2+, were observed with alkaline earth metal chlorides. The other ions observed were [M + MetCl]+, [M + MetOAc]+, [M + MetO2SPh]+ and [2M + MetCl]+. The deprotonated metal adducts [M + Met-H]+ were seen only in the sulfones. The divalent metal ion adducts showed characteristic fragmentation pathways for the glycosyl sulfides, sulfoxides and sulfones, depending on the site of metal attachment. The doubly charged metal ion adducts dissociate to two singly charged ions, [M + MetOAc]+ and [M - OAc]+, in the sulfides and sulfoxides. In the sulfones, the adducts dissociate to [M + MetO2SPh]+ and [M - O2SPh]+. In contrast to the alkaline earth metals, which attach to the acetoxy functions, the transition metals attach to the sulfide and sulfoxide functions. The metal chloride adducts display characteristic fragmentation for the sulfides, sulfoxides and sulfones. The glucosyl, mannosyl and galactosyl sulfides, sulfoxides and sulfones could be differentiated on the basis of the stereochemically controlled MS/MS fragmentations of the metal chloride adducts.

Separation of chelating agents as copper complexes by capillary zone electrophoresis using quaternary ammonium bromides as additives in N-methylformamide

This study presents the use of quaternary ammonium bromides as additives in N-methylformamide (NMF) for the separation and quantification of chelating agents as copper complexes by capillary zone electrophoresis (CZE). The new quaternary ammonium bromides were synthesized in our laboratory and used for the first time for CZE applications performed in NMF media. The methods were developed and optimized for determination of six chelating agents (trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid (CDTA), diethylenetriaminepentaacetic acid (DTPA), ethylenediaminetetraacetic acid (EDTA), N-(2-hydroxyethyl)ethylenediamine-N,N',N'-triacetic acid (HEDTA), nitrilotriacetic acid (NTA) and triethylenetetraaminehexaacetic acid (TTHA)) as copper complexes. Among the tested electrolyte additives in NMF media (pH(app) 10.2) dimethyldioctylammonium bromide (DMDOAB), dimethyldinonylammonium bromide (DMDNAB) and dimethyldidecylammonium bromide (DMDDAB), at a concentration of 20 mmol L(-1) improved the separation of the copper complexes. The optimized methods require only 12 min for one analysis, and the detection limits for copper complexes of DMDNAB, the best-performing additive, were < or =24 micromol L(-1). Relative standard deviations (R.S.D.) for migration times were < or =2.5, < or =2.1, < or =3.1% and for peak areas, < or =3.1, < or =3.0, < or =3.2% for DMDOAB, DMDNAB and DMDDAB used as additives, respectively. All three methods were successfully applied to the analysis of natural and wastewater samples. No matrix effects from these samples were observed. The interaction between quaternary ammonium bromides and copper complexes is discussed.

On-line coupling of cyclodextrin mediated nonaqueous capillary electrophoresis to mass spectrometry for the determination of salbutamol enantiomers in urine

The usefulness of the on-line coupling of nonaqueous capillary electrophoresis (NACE) with electrospray ionization (ESI) mass spectrometry (MS) using heptakis(2,3-di-O-acetyl-6-O-sulfo)-beta-cyclodextrin (HDAS-beta-CD) was demonstrated for the enantioselective determination of low concentrations of salbutamol in human urine. After optimization of several parameters, such as sheath-liquid composition and flow rate, nebulizing gas pressure, CE counter-pressure and position of the CE capillary outlet, a limit of quantification of 18 and 20 ng/ml was obtained for salbutamol enantiomers. Moreover, the relative standard deviation values for repeatability at a concentration of 30 ng/ml were below 7% for both enantiomers. Typical regression lines obtained after application of a simple linear regression model revealed a good relationship between peak area and analyte concentration (with 0.9988 and 0.9966 as coefficients of determination). This paper proposes an easy to use and sensitive NACE-MS method to determine enantiomers of a basic chiral drug in biological fluids preceded by solid-phase extraction as sample cleanup.

Advances in the enantioseparation of second-generation antidepressant drugs by electrodriven methods

Stereochemistry is steadily increasing in importance in the development of new drugs, and the availability of pure enantiomer drugs can make therapy safer and more efficacious. In particular, almost all second-generation antidepressant drugs possess one or more chiral centres; however, only some of them are administered as single enantiomers. A fundamental part of the quality control of pharmaceutical formulations is the determination of enantiomeric excess and enantiomeric purity; this is also important for the therapeutic drug monitoring of depressed patients. For this purpose, efficient and reliable analytical methods are needed and electrodriven techniques (most of all CE, CEC and MEKC) are very efficient and inexpensive candidates for the role. In this review, the enantioselective electrodriven methods available for the analysis of second-generation antidepressant are presented and discussed. In particular, the following pharmacological classes of antidepressants will be considered: selective serotonin reuptake inhibitors (fluoxetine, citalopram, paroxetine, sertraline); norepinephrine reuptake inhibitors (reboxetine); serotonin and norepinephrine reuptake inhibitors (venlafaxine, milnacipran, duloxetine); and noradrenergic and specific serotonergic antidepressants (mirtazapine).

Quantitation in capillary electrophoresis-mass spectrometry

CE-MS has evolved into a strong alternative to LC-MS. Most of CE-MS applications deal with characterization and identification. However, quantitative aspects have gained importance in, e.g., pharmaceutical and biotechnological applications. Here we summarize and evaluate various methodological aspects in order to achieve sensitive and reproducible results. Similar to LC-MS, aspects of matrix influence on the electrospray process need to be carefully addressed when quantitative results are intended by CE-MS. Due to a more complicated coupling special emphasis needs to be put on the CE-MS interface. Generally linearity over more than three orders of magnitude can be achieved by CE-ESI-MS. Furthermore, a literature survey has been performed in order to give an overview over quantitative measurements performed by CE-MS. The precision can be doubled when changing from a structural related to an isotopically labeled internal standard. Thus a level of precision better than 5% RSD can be achieved.

Quantification in capillary electrophoresis-mass spectrometry: long- and short-term variance components and their compensation using internal standards

Different approaches were chosen to examine ionization reproducibility of analytes after separation by capillary electrophoresis-mass spectrometry (CE-MS) in a commercially available sheath-flow electrospray interface. For this task three different standard samples were examined. Sample 1 contained neostigmine bromide (cationic), paracetamol (PCM) (neutral) and nicotinic acid (anionic component). Results were evaluated using internal standard (IS) calculations. Sample 2 represented an isotopically labelled IS of the quantified substance (PCM/D4-PCM), while sample 3 (neostigmine bromide/scopolamine hydrobromide) provided an IS closely migrating to the tested substance. Furthermore, short-time variations inside the interface were examined by multiple injections of the same substance. For sample 1, the relative standard deviations (RSD%s) were between 8 and 25% (n at least 58) for the peak area ratios. Multiple injected samples gave 5.5-19.4% (n = 25) for peak area RSD%. Using a closely migrating IS, sample 3, RSD%s between 6.5 and 10% (n at least 63) were achieved. With isotopically labelled IS, sample 2, an RSD% of 3-4% was achieved for peak area ratios over long periods (n = 25), for shorter periods (n = 9) even 1-2% RSD% was obtained. Keeping the instrument settings constant, the influence on the ionization efficiency and reproducibility was tested, varying the buffer pH, the organic buffer modifier and the sample concentration. Repeatabilities of migration time and peak area were measured and compared. Two 10 mM ammonium acetate buffers with pH 4.0 and 8.5 were investigated. No influence of buffer pH on peak area reproducibility was found. Isopropanol as organic buffer modifier significantly improved the ionisation leading to larger peak areas, but reduced reproducibility. The basic buffer produced slightly better RSD%s for migration times (2.5-4.0%) (n = 180) and faster analysis for the different test analytes of sample 1, while with the acetic buffer, RSD%s from 3.9 to 6.0% were obtained (n at least 163). The positioning of the capillary turned out to be the crucial parameter to ensure reproducible results. Thus, a procedure was established to ensure a defined ion-intensity level after capillary changes. The investigation of the different sample concentrations gave negligible differences in RSD%, showing that the signal-to-noise ratio was not the crucial parameter for reproducibility here, in contrast to CE-UV detection.

Separation of antidepressants by capillary electrophoresis with in-line solid-phase extraction using a novel monolithic adsorbent

The separation of three selective serotonin reuptake inhibitors (SSRIs) by capillary electrophoresis (CE) with fully integrated solid-phase extraction (SPE) is described. Polymeric monolithic SPE modules were prepared in situ within a fused silica capillary from either butyl methacrylate-co-ethylene dimethacrylate or 3-sulfopropyl methacrylate-co-butyl methacrylate-co-ethylene dimethacrylate. Using a 1cm SPE module placed at the inlet of the capillary, a mixture of sertraline, fluoxetine and fluvoxamine was extracted from aqueous solution by applying a simple pressure rinse. Under pressure-driven conditions, efficient elution was possible from both SPE materials investigated using 50mM phosphate buffer, pH 3.5 in acetonitrile (20/80, v/v). Two different strategies were investigated for the efficient elution and subsequent CE separation. Injection of an aqueous sample plug directly into the non-aqueous elution/separation buffer was found to be unsuitable with poor elution profiles observed in the electrodriven mode. Alternatively, a sample plug equivalent to several capillary volumes could be injected by pressure followed by filling the capillary with the non-aqueous elution/separation buffer from the outlet end using a combination of pressure and electrodriven flow. Using a neutral monolith, efficient elution/separation was not possible due to an unstable electroosmotic flow (EOF), however, by adding the ionisable monomer, 3-sulfopropyl methacrylate to the SPE module to increase and stabilise the EOF, it was possible to achieve efficient elution from the SPE module, followed by baseline separation by CE using a 200 mM acetate buffer, pH 3.5 in acetonitrile (10/90, v/v). With enrichment factors of over 500 achieved for each of the analytes this demonstrates the potential of in-line SPE-CE for the sensitive analysis of these drugs.

Effect of metal cationization on the tandem mass spectra of glycosyl dithioacetals

The effect of metal cationization on the tandem mass spectra of glycosyl dithioacetals of glucose, mannose, galactose, rhamnose, arabinose and xylose was studied by electrospray ionization mass spectrometry under ammonium and metal (Li, Na, Ag and Cu) ion cationization conditions. The ammonium-cationized glycosyl dithioacetals fragment by loss of ammonia followed by either two molecules of EtSH or one molecule of EtSH and one molecule of H2O. Lithium cationization leads to additional eliminations such as EtSEt and EtSSEt and C-C cleavages. Elimination of EtSH is not observed under sodium cationization. Silver cationization, on the other hand, leads to additional fragmentations involving the elimination of silver as AgOH and AgSEt. Copper cationization results in adducts where copper has undergone a change of oxidation state from II to I. Li+, Ag+ and Cu+ cationization seem to favour cyclization resulting in elimination of EtSH. However, the mechanisms seem to be differently affected by different metal ions. Li+ and Ag+ cationization appear to be non-specific and favour cyclization involving C2-, C4- and C5-hydroxyl hydrogens, whereas Cu+ cationization seems to favour cyclization involving C4-hydroxyl hydrogen.

Tandem mass spectra of transition-metal ion adducts of glycosyl dithioacetals; distinction among stereoisomers

Electrospray ionization mass spectra of some glycosyl dithioacetals recorded in the presence of transition-metal chlorides, XCl2 (where X = Co, Mn and Zn), give abundant adduct ions such as [M+XCl]+ and [2M-H+X]+ and minor ions such as [M-H+X]+ and [2M+XCl]+. The tandem mass spectra of these adducts show characteristic elimination of neutral molecules such as H2O, HCl, EtSH, CH2O, C2H4O2/C2H4O. [M+XCl]+ ions fragment readily and the fragmentation appears to be stereochemically controlled as the relative abundances of the fragments are different for three stereoisomers. The added metal is lost as neutral molecules in the form of XCl(OH) and XCl(SEt). This is a predominant pathway in the ZnCl+ adducts. [2M+XCl]+ ions fragment preferentially by elimination of HCl, indicating strong metal interactions in the resulting dimeric [2M-H+X]+ ion. As there are several electron-rich centers in the molecule, the dimeric complex [2M-H+X]+ can have several structures and the observed fragmentations may reflect the sum of those of all these structures. The dimeric complexes fragment by elimination of neutral molecules leaving the dimeric interactions intact. The extent of fragmentation varies for the stereoisomers, leading to stereochemical differentiation.

A beveled tip sheath liquid interface for capillary electrophoresis-electrospray ionization-mass spectrometry

A simple and durable sheath liquid interface for capillary zone electrophoresis-electrospray ionization-mass spectrometry (CZE-ESI-MS) has been developed. This interface utilized a beveled tip emitter and was found to be more sensitive than the conventional sheath liquid interface. The use of a beveled tip reduces the optimal flow rate and therefore decreases sample dilution. The interface utilized a 380 microm inner diameter and 400 microm outer diameter beveled tapered tip. Because of the large inner diameter and outer diameter of the tip, the interface is robust and can be easily implemented. The performance of this interface for CZE-ESI-MS and micelle electrokinetic capillary electrophoresis-electrospray-mass spectrometry, as demonstrated by the analysis of synthetic drugs and triazine mixtures, was significantly better than results obtained using a conventional sheath liquid interface.

The control of nitrilotriacetic acid in edetic acid and its salts by liquid chromatography

Two liquid chromatographic methods have been developed and validated for the determination of nitrilotriacetic acid (NTA) in edetic acid (EDTA) and its salts. In one method NTA and EDTA are separated on a polymer column without pretreatment, and are detected amperometrically using a glassy-carbon electrode. In the other method NTA and EDTA are complexed with ferric ions and the complexes separated on a porous graphite carbon stationary phase with ultraviolet detection at 215 nm. Both methods were sufficiently selected and sensitive to allow the control of NTA (0.1% m/m) in sample of EDTA and its salts.

Monitoring EDTA process residuals in recombinant protein manufacturing using liquid chromatography

We have developed a chromatographic method for the high sensitivity quantitation of EDTA process residuals in recombinant protein manufacturing validation studies. The reversed-phase HPLC method is based upon the detection of Cu(2+)/EDTA complexes at 254 nm, and has been qualified for use on intermediates from a purification process for a recombinant protein expressed in E. coli. Quantitation of EDTA in recombinant protein process intermediates is linear in the range of 0.2 to 64 microM with LOD/LOQ values below 2.0 microM. The assay is suitable for use in process backgrounds containing Tris, HEPES, MES, NaCl, hexanediol, NH(4)SO(4), and PEG. EDTA spike recovery values in all process samples tested were greater than 90% at the 4.0 microM concentration. System suitability parameters for the chromatographic method were developed based upon peak area and retention time precision, column efficiency and USP tailing. Peak area precision and intermediate precision values across the linear range of the assay exhibited C.V. values less than 15% at any concentration tested in all sample backgrounds. The assay robustness was tested by transfer of the assay to a second laboratory and analyst with use of multiple process intermediate lots, reagent/column lots, and HPLC systems.

Tandem mass spectra of ammonium ion, metal ion and ligated metal ion adducts of acyclic sugar derivatives

The tandem mass (MS/MS) spectra of ammonium ion, metal ion and ligated metal ion adducts of chain-extended acyclic nitro-containing deoxyglucose and deoxygalactose derivatives have been studied. The ammonium adducts fragment primarily by elimination of ammonia followed by acetic acid, thus not giving much structural information. In contrast, cationization of these compounds by metal ions and ligated metal ions gave structurally informative and useful fragment ions on MS/MS. The metal ions and ligated metal ions play an important role in controlling and directing fragmentation. Retro-aldol fragmentation is facilitated by metal ions such as Li(+), Na(+), Ag(+) and Cu(+), whereas the adducts with higher alkali metal ions such as Rb(+) and Cs(+) fragment to give only the corresponding metal ions. The divalent metal ions such as Cu(2+) and Ba(2+) also induce retro-aldol fragmentation. However, the charge is carried by the aldehyde fragment in the case of Cu(2+) adducts, whereas the nitroalkane fragment carries the charge in the case of Ba(2+) adducts. Ligated metal ions such as ZnCl(+), CuCl(+), InCl(2) (+) and BaCl(+) also behave similarly and induce retro-aldol fragmentation in these acyclic sugars. Both the metal ion and ligated metal ion adducts can fragment by elimination of metal-containing neutral molecules.

Environmental chemistry of aminopolycarboxylate chelating agents

Aminopolycarboxylate chelating agents are under scrutiny due to their influence on metal availability and mobility and in particular due to their persistence in the environment. In this review chelate adsorption, metal-mobilization, metal-exchange, mineral dissolution, reactive transport, photodegradation, and chemical degradation are all shown to be substantially affected by the chelated metal ion. The different reactivities of the metal-complexes have to be considered when assessing the reactions of chelating agents in the environment because they occur in natural waters predominantly in the form of metal complexes. Knowing the speciation of chelating agents in natural waters is therefore crucial for predicting their environmental fate. Despite this importance, only a few speciation measurements have been reported for natural waters, and model calculations have been frequently used instead. These calculations are, however, complicated by slow metal-exchange reactions that result in a nonequilibrium speciation and by the presence of naturally occurring ligands that compete with the chelating agents for available metals. The basis for a refined risk assessment of aminocarboxylate chelates should be the actual speciation in the natural water directly determined by analytical methods. The discussion of the influence of chelates on metal availability and fate also has to include the potential presence of other aminopolycarboxylate chelating agents besides the well-known EDTA and NTA.

Large-volume sample stacking for analysis of ethylenediaminetetraacetic acid by capillary electrophoresis

A simple, quick, and sensitive capillary electrophoretic technique-large volume stacking using the electroosmotic flow (EOF) pump (LVSEP) - has been developed for determining ethylenediaminetetraacetic acid (EDTA) in drinking water for the first time. It is based on a precapillary complexation of EDTA with Fe(III) ions, followed by large-volume sample stacking and direct UV detection at 258 nm. The curve of peak response versus concentration was linear from 5.0 to 600.0 microg/L, and 0.7 to 30.0 mg/L. The regression coefficients were 0.9988 and 0.9990, respectively. The detection limit of the current technique for EDTA analysis was 0.2 microg/L with an additional 10-fold preconcentration procedure, based on the signal-to-noise ratio of 3. As opposed to the classical capillary zone electrophoresis (CE) method, the detection limit was improved about 1000-fold by using this LVSEP method. To the best of our knowledge, it represents the highest sensitivity for EDTA analysis via CE. Several drinking water samples were tested by this novel method with satisfactory results.

Hadamard transform time-of-flight mass spectrometry: a high-speed detector for capillary-format separations

This work demonstrates that with an intrinsic duty cycle of 50% and spectral storage speeds up to 277 spectra s(-1) Hadamard transform time-of-flight mass spectrometry (HT-TOFMS) is a promising detector for any capillary-format separation that can be coupled to MS by electrospray ionization. Complete resolution of the components of a nine-peptide standard was achieved by coupling pressurized-capillary electrophoresis (pCE) to HT-TOFMS. The addition of pressure to the separation capillary decreased analysis times and stabilized the electrospray ionization source. Pulsed-pressurized injection of reserpine was used to experimentally simulate narrower peaks than those obtained in the pCE. HT-TOFMS was able to sample peaks having widths in the millisecond range.

Effects of nebulizing and drying gas flow on capillary electrophoresis/mass spectrometry

This study was focused on examining the influence of gas flow parameters on capillary electrophoresis/mass spectrometry (CE /MS) performance using sheath-liquid CE /MS interfaces. The effects of nebulizing and drying gas velocity and drying gas temperature on CE separation and MS detection sensitivity were systematically determined. Nebulizing gas velocity was observed to be a critical parameter in the optimization of CE /MS method, since it affected both MS detection sensitivity, and also CE separation efficiency for one interface design tested. Better detection sensitivity was obtained when the nebulizing gas velocity was increased. However, high velocity of the nebulizing gas flow can cause a hydrodynamic bulk flow inside the CE capillary, thus clearly increasing the apparent mobility and decreasing the resolution obtained for the compounds studied. Increasing the drying gas velocity or temperature did not affect the apparent mobility or the separation efficiency and the temperature could be increased to achieve the optimal detection sensitivity in the CE /MS analysis. For comparison, the effects of nebulizing gas flow were studied using a different design of the coaxial sheath-liquid CE /MS interface, and in this case better detection sensitivity but no effect on CE separation efficiency was observed with increased nebulizing gas velocity. These different effects of nebulizing gas flow on the CE bulk flow were concluded to result from pressure differences at the tip of the CE capillaries for the different CE /MS interface arrangements. It is therefore recommended that the cross-sectional dimensions of the fused-silica and steel capillaries, and the gas streamlines, should be optimized when CE /MS interfaces are built. Moreover, the effect of gas flow on CE separation should be studied when optimizing the CE /MS operation parameters.

Coupling continuous separation techniques to capillary electrophoresis

One of the weak points of capillary electrophoresis is the need to implement rigorously sample pretreatment because its great impact on the quality of the qualitative and quantitative results provided. One of the approaches to solve this problem is through the symbiosis of automatic continuous flow systems (CFSs) and capillary electrophoresis (CE). In this review a systematic approach to CFS-CE coupling is presented and discussed. The design of the corresponding interface depends on three factors, namely: (a) the characteristics of the CFS involved which can be non-chromatographic and chromatographic; (b) the type of CE equipment: laboratory-made or commercially available; and (c) the type of connection which can be in-line (on-capillary), on-line or mixed off/on-line. These are the basic criteria to qualify the hyphenation of CFS (solid-phase extraction, dialysis, gas diffusion, evaporation, direct leaching) with CE described so far and applied to determine a variety of analytes in many different types of samples. A critical discussion allows one to demonstrate that this symbiosis is an important topic in research and development, besides separation and detection, to consolidate CE as a routine analytical tool.

Pressure-assisted capillary electrophoresis–electrospray ion trap mass spectrometry for the analysis of heparin depolymerised disaccharides

A pressure-assisted capillary electrophoresis-ion trap mass spectrometry method was developed for the analysis of eight heparin-derived disaccharides. A 30 mM formic acid buffer at pH 3.20 was selected as running electrolyte, and the separation was performed by the simultaneous application of a CE voltage of -30 kV and an overimposed pressure of 0.5 p.s.i. (3.45 kPa). The application of pressure assistance was needed to provide stable electrospray conditions for successful coupling. The linearity of the CE-MS and CE-MS-MS methods was checked under these conditions. Quality parameters such as run-to-run precision and limits of detection were established in both CE-MS and CE-MS-MS modes. Finally, enzymatically depolymerised bovine and porcine mucosal heparins were analysed in this CE-MS system and the characteristic relative molar percentages of major and minor disaccharides were calculated.

Potential of capillary electrophoresis, tandem mass spectrometry and coupled capillary electrophoresis–tandem mass spectrometry as diagnostic tools

Urine and blood samples from patients with known metabolic disorders have been analyzed by CE, MS-MS and CE-MS-MS. For the identification of defects in acylcarnitine metabolism, blood spots on filter paper were analyzed using an MS-MS "neonatal screening" approach. Direct CE-MS-MS analysis was used for the analysis of urine samples from patients with different metabolic disorders, including galactosemia, neuroblastoma, Zellweger syndrome, propionic acidemia and alcaptonuria. The sensitivity of the CE-MS-MS method was increased by use of multiple reaction monitoring.

Collision-induced dissociation of MCl(+) adducts (M = Mg, Mn, Zn, Co, Ni and Cu) and Cu(+) and Ag(+) adducts of dithioalkyl ketene acetals

Electrospray ionization mass spectra of equimolar solutions of dithioalkyl ketene acetals 1 and 2 and metal chlorides (MgCl(2), MnCl(2), ZnCl(2), CoCl(2), NiCl(2) and CuCl(2)) produced abundant ligated metal ion adducts [1 + MCl](+) and [2 + MCl](+). In addition, CuCl(2) also gave rise to Cu(+) adducts. The ligated metal ion adducts upon collision-induced dissociation (CID) showed characteristic fragmentation pathways reflecting the favoured site of coordination. The results show that MgCl(+) prefers oxygen over sulfur, whereas the reverse is true for ZnCl(+) adducts, exemplified by the preferred fragmentation of [1 + MgCl](+) as elimination of MgCl(OH), while that of [1 + ZnCl](+) is expulsion of ZnCl(SCH(3)). Co and Ni chloride adducts tend to give stable metal coordinated species. Cleavage of the dithiolane ring followed by elimination of C(2)H(4)S is the preferred pathway during the CID of [2 + MCl](+) adducts. The CuCl(+) adducts of 1 and 2 showed reduction of Cu((I)) to Cu((0)) resulting in the M(+)(*)ions of 1 and 2. Abstraction of *CH(3) resulting in elimination of CuCH(3) was observed during CID of Cu(+) adducts of 1 and 2. A comparative study of the corresponding Ag(+) adducts revealed a similar behaviour.

Hyphenated chromatographic methods for biomaterials

The improvement in hyphenated analytical techniques has significantly widened their applications to the analysis of biomaterials. In this article, we discuss recent advances in applications of hyphenated chromatographic techniques including capillary electrophoresis to the analyses of biological samples. As tools of separation, gas chromatography, high-performance liquid chromatography and capillary electrophoresis are considered with special emphasis on applications utilizing the hyphenation of these methods to mass spectrometry. Moreover, applications using other detection methods such as Fourier transform infrared spectroscopy hyphenated to gas chromatography and photodiode array detector combined with high-performance liquid chromatography or capillary electrophoresis are also discussed. Owing to their high sensitivity, luminescence-based detection systems such as laser-induced fluorescence and chemiluminescence are also included in this review.

Automating solid-phase extraction: current aspects and future prospects

This paper reviews current trends and techniques in automated solid-phase extraction. The area has shown a dramatic growth the number of manuscripts published over the last 10 years, including applications in environmental science, food science, clinical chemistry, pharmaceutical bioanalysis, forensics, analytical biochemistry and organic synthesis. This dramatic increase of more that 100% per year can be attributed to the commercial availability of higher throughput 96-well workstations and extraction plates that allow numerous samples to be processed simultaneously. These so-called parallel-processing workstations represent the highest throughput systems currently available. The advantages and limitations of other types of systems, including discrete column systems and on-line solid-phase extraction are also discussed. Discussions of how automated solid-phase extractions can be developed, generic approaches to automated solid-phase extraction, and three noteworthy examples of automated extractions are given. The last part of the review suggests possible near- and long-term directions of automated solid-phase extraction.

Strategies to improve the sensitivity in capillary electrophoresis for the analysis of drugs in biological fluids

Capillary electrophoresis (CE) is a useful method to quantify drugs in biological fluids. However, especially for blood or plasma samples, the sensitivity is not sufficient to quantify drugs and their metabolites as they often need to be quantified in the lower microg/L range. To overcome this limitation and to increase the sensitivity, two strategies are applied: first, to increase the amount of analyte added to the capillary and, second, to increase the sensitivity on the detector site. To improve the sensitivity on the detector site, alternative detection techniques to UV detection, e.g., laser-induced fluorescence detection (LIF) or mass spectroscopy (MS), can be applied. However, LIF detection can only be used for fluorescent analytes and the current equipment for CE-MS coupling provides only small improvements in sensitivity compared to UV detection. The detection window for UV detection can be enhanced using capillaries with an extended light path (bubble cell) or Z-shaped capillaries. Sensitivity improvements up to a factor of 10 have been reported. Increasing the amount of analyte in the capillary can be done either by chromatographic or by electrokinetic methods. Chromatographic methods such as on-capillary membrane preconcentration have been used for several analytes. However, no validated application has been reported to date. In contrast, several validated examples can be found in which electrokinetic techniques like sample stacking have been applied to achieve limits of quantification in the lower microg/L range. In conclusion, to date, electrokinetic techniques such as field-amplified sample injection offer the most promising results in achieving a sufficient sensitivity to quantify drugs in biological fluids.

Identification of metal cations, metal complexes, and anions by electrospray mass spectrometry in the negative ion mode

Pneumatically assisted electrospray mass spectrometry (ES-MS) is used in the negative ion mode for aqueous metal (M) solutions in an excess of hydrochloric or nitric acid, where the major anion X = Cl- or NO3-. A collision energy of approximately 20 eV removes anion-solvent clusters for most elements and leaves negative complex ions of the general form (Mn+Xn+1)-. Complexation with anions prevents charge reduction reactions at least to n = 3, even in cases where the third ionization energy of M greatly exceeds the first ionization energy of the solvent. These negative ions thus preserve the charge state of the metal cation from the solution and allow identification of both cations and anions in a single set of electrospray conditions. Cations such as Fe3+ or Cu2+ that have a lower oxidation state in solution produce a distribution of negative ions, each with a single negative charge overall; e.g., an Fe3+ solution produces both Fe(III)X4- and Fe(III)X3-. This distribution of FeIII and FeII species is attributed to electrochemical reduction of Fe3+ at the negatively charged ES needle. "Native" anions such as perrhenate or molybdate produce singly charged analogues such as ReO4- or HMoO4-. Metal-EDTA complexes are seen as M(III)Y- or M(II)HY-. The sensitivity for these "native" anions is suppressed by competition with the excess chloride or nitrate used to produce the metal-containing complex ions.

Determination of carnitine and acylcarnitines in biological samples by capillary electrophoresis-mass spectrometry

Free carnitine and acylcarnitines (carnitine esters) play an important role in the metabolism of fatty acids. Metabolic disorders can be detected by abnormal levels of these compounds in biological fluids. Capillary electrophoresis-mass spectrometry has the advantage of combining an efficient separation technique with highly selective detection. Therefore, we have developed a method for the determination of carnitine and several of its esters implementing electrospray capillary electrophoresis-mass spectrometry in the positive ion selected reaction monitoring mode. A sheath-flow interface with a mixture of 2-propanol or methanol, water and acetic acid as sheath liquid and nitrogen as nebulizing gas was used. The zwitterionic analytes migrated as cations in the applied electric field using ammonium acetate-acetic acid or formic acid electrolytes. Separations were performed in aqueous, mixed organic-aqueous and non-aqueous media. The influence of the electrolyte composition on the separation efficiency was investigated. The electrospray conditions have been optimized regarding ion current stability and sensitivity. Ammonium acetate (10 mmol/l)-0.8% formic acid in water or 6.4% formic acid in acetonitrile-water (1:1) were used as running buffers for the determination of carnitine and acylcarnitines in human biological samples. Methanol extracts of dried blood spots were analyzed as well as urine and plasma following sample preparation via solid-phase or liquid-liquid extraction. Recoveries approaching 100% were achieved depending on the analytes and sample preparation procedures employed. Endogenous carnitine and acetylcarnitine were determined at concentrations between 2.7 and 108 nmol/ml in normal human urine and plasma. Other acylcarnitines were detected at levels of below the limit of detection to 12 nmol/ml. Good precision (0.8 to 14%) and accuracy (85 to 111%) were obtained; the achieved limits of quantitation (0.1 to 1 nmol/ml) are sufficient to characterize carnitine and acylcarnitine levels occurring as markers for metabolic disorders.