Sensing antimonite and arsenite at the subattomole level with genetically engineered bioluminescent bacteria

Illuminating Progress: The Contribution of Bioluminescence to Sustainable Development Goal 6-Clean Water and Sanitation-Of the United Nations 2030 Agenda

The United Nations Agenda 2030 Sustainable Development Goal 6 (SDG 6) aims at ensuring the availability and sustainable management of water and sanitation. The routine monitoring of water contaminants requires accurate and rapid analytical techniques. Laboratory analyses and conventional methods of field sampling still require considerable labor and time with highly trained personnel and transport to a central facility with sophisticated equipment, which renders routine monitoring cumbersome, time-consuming, and costly. Moreover, these methods do not provide information about the actual toxicity of water, which is crucial for characterizing complex samples, such as urban wastewater and stormwater runoff. The unique properties of bioluminescence (BL) offer innovative approaches for developing advanced tools and technologies for holistic water monitoring. BL biosensors offer a promising solution by combining the natural BL phenomenon with cutting-edge technologies. This review provides an overview of the recent advances and significant contributions of BL to SDG 6, focusing attention on the potential use of the BL-based sensing platforms for advancing water management practices, protecting ecosystems, and ensuring the well-being of communities.

Natural Microbial Reactor-Based Sensing Platform for Highly Sensitive Detection of Inorganic Arsenic in Rice Grains

Rice is a major dietary source of inorganic arsenic (iAs), a highly toxic arsenical that accumulates in rice and poses health risks to rice-based populations. However, the availability of detection methods for iAs in rice grains is limited. In this study, we developed a novel approach utilizing a natural bacterial biosensor, Escherichia coli AW3110 (pBB-ArarsR-mCherry), in conjunction with amylase hydrolysis for efficient extraction, enabling high-throughput and quantitative detection of iAs in rice grains. The biosensor exhibits high specificity for arsenic and distinguishes between arsenite [As(III)] and arsenate [As(V)] by modulating the concentration of PO43- in the detection system. We determined the iAs concentrations in 19 rice grain samples with varying total As concentrations and compared our method with the standard technique of microwave digestion coupled with HPLC-ICP-MS. Both methods exhibited comparable results, without no significant bias in the concentrations of As(III) and As(V). The whole-cell biosensor demonstrated excellent reproducibility and a high signal-to-noise ratio, achieving a limit of detection of 16 μg kg-1 [As(III)] and 29 μg kg-1 [As(V)]. These values are considerably lower than the maximum allowable level (100 μg kg-1) for infant rice supplements established by the European Union. Our straightforward sensing strategy presents a promising tool for detecting iAs in other food samples.

Time-Dependent Biosensor Fluorescence as a Measure of Bacterial Arsenic Uptake Kinetics and Its Inhibition by Dissolved Organic Matter

Microbe-mediated transformations of arsenic (As) often require As to be taken up into cells prior to enzymatic reaction. Despite the importance of these microbial reactions for As speciation and toxicity, understanding of how As bioavailability and uptake are regulated by aspects of extracellular water chemistry, notably dissolved organic matter (DOM), remains limited. Whole-cell biosensors utilizing fluorescent proteins are increasingly used for high-throughput quantification of the bioavailable fraction of As in water. Here, we present a mathematical framework for interpreting the time series of biosensor fluorescence as a measure of As uptake kinetics, which we used to evaluate the effects of different forms of DOM on uptake of trivalent arsenite. We found that thiol-containing organic compounds significantly inhibited uptake of arsenite into cells, possibly through the formation of aqueous complexes between arsenite and thiol ligands. While there was no evidence for competitive interactions between arsenite and low-molecular-weight neutral molecules (urea, glycine, and glyceraldehyde) for uptake through the aquaglyceroporin channel GlpF, which mediates transport of arsenite across cell membranes, there was evidence that labile DOM fractions may inhibit arsenite uptake through a catabolite repression-like mechanism. The observation of significant inhibition of arsenite uptake at DOM/As ratios commonly encountered in wetland pore waters suggests that DOM may be an important control on the microbial uptake of arsenite in the environment, with aspects of DOM quality playing an important role in the extent of inhibition. IMPORTANCE The speciation and toxicity of arsenic in environments like rice paddy soils and groundwater aquifers are controlled by microbe-mediated reactions. These reactions often require As to be taken up into cells prior to enzymatic reaction, but there is limited understanding of how microbial arsenic uptake is affected by variations in water chemistry. In this study, we explored the effect of dissolved organic matter (DOM) quantity and quality on microbial As uptake, with a focus on the role of thiol functional groups that are well known to form aqueous complexes with arsenic. We developed a quantitative framework for interpreting fluorescence time series from whole-cell biosensors and used this technique to evaluate effects of DOM on the rates of microbial arsenic uptake. We show that thiol-containing compounds significantly decrease rates of As uptake into microbial cells at environmentally relevant DOM/As ratios, revealing the importance of DOM quality in regulating arsenic uptake, and subsequent biotransformation, in the environment.

Sb(III) resistance mechanism and oxidation characteristics of Klebsiella aerogenes X

Resistant bacteria are potential natural materials for the bioremediation of soil metalloid pollution. A strain isolated from farmland soil chronically exposed to Sb was identified as K. aerogenes X with high antimonite [Sb(III)] tolerance and oxidation ability. The resistance mechanism of K. aerogenes X and its extracellular polymeric substances (EPS), antioxidant enzymes, and oxidation characteristics in Sb(III) stress were investigated in this study by stress incubation experiments and FTIR. The biotoxicity of Sb was limited by the binding of the organic compounds in EPS, and the anionic functional groups (e.g., amino, carboxyl and hydroxyl groups, etc.) present in the cell envelope were the components primarily responsible for the metalloid-binding capability of K. aerogenes X. The K. aerogenes X can oxidize Sb(III), and its metabolites induce changes in reactive oxygen species (ROS), catalase (CAT), total superoxide dismutase (SOD) and glutathione s-transferase (GSH-S) activity, indicating that the resistance mechanisms of K. aerogenes X are mediated by oxidative stress, EPS restriction and cell damage. Oxidation of Sb(III) is driven by interactions in intracellular oxidation, cell electron transport, extracellular metabolism including proteins and low molecular weight components (LMWs). LMWs (molecular weight <3 kDa) are the main driving factor of Sb(III) oxidation. In addition, Sb resistance genes arsA, arsB, arsC, arsD and acr3 and potential oxidation gene arsH were identified in K. aerogenes X. Owing to its natural origin, high tolerance and oxidation ability, K. aerogenes X could serve as a potential bioremediation material for the mitigation of Sb(III) in contaminated areas.

Microbial whole-cell biosensors: Current applications, challenges, and future perspectives

Microbial Whole-Cell Biosensors (MWCBs) have seen rapid development with the arrival of 21st century biological and technological capabilities. They consist of microbial species which produce, or limit the production of, a reporter protein in the presence of a target analyte. The quantifiable signal from the reporter protein can be used to determine the bioavailable levels of the target analyte in a variety of sample types at a significantly lower cost than most widely used and well-established analytical instrumentation. Furthermore, the versatile and robust nature of MWCBs shows great potential for their use in otherwise unavailable settings and environments. While MWCBs have been developed for use in biomedical, environmental, and agricultural monitoring, they still face various challenges before they can transition from the laboratory into industrialized settings like their enzyme-based counterparts. In this comprehensive and critical review, we describe the underlying working principles of MWCBs, highlight developments for their use in a variety of fields, detail challenges and current efforts to address them, and discuss exciting implementations of MWCBs helping redefine what is thought to be possible with this expeditiously evolving technology.

A Microbial Electrochemical Technology to Detect and Degrade Organophosphate Pesticides

Organophosphate (OP) pesticides cause hundreds of illnesses and deaths annually. Unfortunately, exposures are often detected by monitoring degradation products in blood and urine, with few effective methods for detection and remediation at the point of dispersal. We have developed an innovative strategy to remediate these compounds: an engineered microbial technology for the targeted detection and destruction of OP pesticides. This system is based upon microbial electrochemistry using two engineered strains. The strains are combined such that the first microbe (E. coli) degrades the pesticide, while the second (S. oneidensis) generates current in response to the degradation product without requiring external electrochemical stimulus or labels. This cellular technology is unique in that the E. coli serves only as an inert scaffold for enzymes to degrade OPs, circumventing a fundamental requirement of coculture design: maintaining the viability of two microbial strains simultaneously. With this platform, we can detect OP degradation products at submicromolar levels, outperforming reported colorimetric and fluorescence sensors. Importantly, this approach affords a modular, adaptable strategy that can be expanded to additional environmental contaminants.

Engineering genetically encoded FRET-based nanosensors for real time display of arsenic (As3+) dynamics in living cells

Arsenic poisoning has been a major concern that causes severe toxicological damages. Therefore, intricate and inclusive understanding of arsenic flux rates is required to ascertain the cellular concentration and establish the carcinogenetic mechanism of this toxicant at real time. The lack of sufficiently sensitive sensing systems has hampered research in this area. In this study, we constructed a fluorescent resonance energy transfer (FRET)-based nanosensor, named SenALiB (Sensor for Arsenic Linked Blackfoot disease) which contains a metalloregulatory arsenic-binding protein (ArsR) as the As³⁺ sensing element inserted between the FRET pair enhanced cyan fluorescent protein (ECFP) and Venus. SenALiB takes advantage of the ratiometic FRET readout which measures arsenic with high specificity and selectivity. SenALiB offers rapid detection response, is stable to pH changes and provides highly accurate, real-time optical readout in cell-based assays. SenALiB-676n with a binding constant (K_d) of 0.676 × 10⁻⁶ M is the most efficient affinity mutant and can be a versatile tool for dynamic measurement of arsenic concentration in both prokaryotes and eukaryotes in vivo in a non-invasive manner.

Transcriptional regulatory proteins as biosensing tools

We have developed sensing systems employing different classes of transcriptional regulatory proteins genetically and chemically modified to incorporate a fluorescent reporter molecule for detection of arsenic, hydroxylated polychlorinated biphenyls (OH-PCBs), and cyclic AMP (cAMP). These are the first examples of optical sensing systems based on transcriptional regulatory proteins.

Engineering Rugged Field Assays to Detect Hazardous Chemicals Using Spore-Based Bacterial Biosensors

Bacterial whole cell-based biosensors have been genetically engineered to achieve selective and reliable detection of a wide range of hazardous chemicals. Although whole-cell biosensors demonstrate many advantages for field-based detection of target analytes, there are still some challenges that need to be addressed. Most notably, their often modest shelf life and need for special handling and storage make them challenging to use in situations where access to reagents, instrumentation, and expertise are limited. These problems can be circumvented by developing biosensors in Bacillus spores, which can be engineered to address all of these concerns. In its sporulated state, a whole cell-based biosensor has a remarkably long life span and is exceptionally resistant to environmental insult. When these spores are germinated for use in analytical techniques, they show no loss in performance, even after long periods of storage under harsh conditions. In this chapter, we will discuss the development and use of whole cell-based sensors, their adaptation to spore-based biosensors, their current applications, and future directions in the field.

Development of a set of bacterial biosensors for simultaneously detecting arsenic and mercury in groundwater

There is a growing need for effective and inexpensive environmental monitoring strategies for assessing heavy metal contamination levels. We developed a set of bacterial biosensors to simultaneously detect multiple bioavailable heavy metals (As(III) and Hg(II)). The biosensors provide a choice of the two reporter systems, luxCDABE and gfp, combined with metal responsive regulatory elements (ars and mer for As(III) and Hg(II), respectively). The results showed that the induction of the luxCDABE-based constructs was more sensitive than that of the gfp-based constructs for the detection of As(III) and Hg(II). In addition, both the luminescent and fluorescent biosensors readily distinguished As and Hg concentrations in groundwater samples to meet the groundwater quality standards. Due to the potentially complicated chemicals present in environmental samples, using a set of bacterial biosensors with different reporter genes to simultaneously determine the bioavailable proportions of heavy metals is desirable.

Integrated phytobial remediation for sustainable management of arsenic in soil and water

Arsenic (As), cited as the most hazardous substance by the U.S. Agency for Toxic Substance and Disease Registry (ATSDR, 2005), is an ubiquitous metalloid which when ingested for prolonged periods cause extensive health effects leading to ultimate untimely death. Plants and microbes can help mitigate soil and groundwater As problem since they have evolved elaborate detoxification machineries against this toxic metalloid as a result of their coexistence with this since the origin of life on earth. Utilization of the phytoremediation and bioremediation potential of the plants and microbes, respectively, is now regarded as two innovative tools that encompass biology, geology, biotechnology and allied sciences with cutting edge applications for sustainable mitigation of As epidemic. Discovery of As hyperaccumulating plants that uptake and concentrate large amounts of this toxic metalloid in their shoots or roots offered new hope to As phytoremediation, solar power based nature's own green remediation. This review focuses on how phytoremediation and bioremediation can be merged together to form an integrated phytobial remediation which could synergistically achieve the goal of large scale removal of As from soil, sediment and groundwater and overcome the drawbacks of the either processes alone. The review also points to the feasibility of the introduction of transgenic plants and microbes that bring new hope for more efficient treatment of As. The review identifies one critical research gap on the importance of remediation of As contaminated groundwater not only for drinking purpose but also for irrigation purpose and stresses that more research should be conducted on the use of constructed wetland, one of the most suitable areas of application of phytobial remediation. Finally the review has narrowed down on different phytoinvestigation and phytodisposal methods, which constitute the most essential and the most difficult part of pilot scale and field scale applications of phytoremediation programs.

Biosensors for inorganic and organic arsenicals

Arsenic is a natural environmental contaminant to which humans are routinely exposed and is strongly associated with human health problems, including cancer, cardiovascular and neurological diseases. To date, a number of biosensors for the detection of arsenic involving the coupling of biological engineering and electrochemical techniques has been developed. The properties of whole-cell bacterial or cell-free biosensors are summarized in the present review with emphasis on their sensitivity and selectivity. Their limitations and future challenges are highlighted.

Fluorescent and bioluminescent cell-based sensors: strategies for their preservation

Luminescent whole-cell biosensing systems have been developed for a variety of analytes of environmental, clinical, and biological interest. These analytical tools allow for sensitive, rapid, simple, and inexpensive quantitative detection of target analytes. Furthermore, they can be designed to be nonspecific, semispecific, or highly specific/selective. A notable feature of such sensing systems employing living cells is that they provide information on the analyte bioavailability and activity. These characteristics, along with their suitability to miniaturization, make cell-based sensors ideal for field applications. However, a major limitation to on-site use is their "shelf-life." To address this problem, various methods for preservation of sensing cells have been reported, including freeze-drying, immobilization in different types of matrices, and formation of spores. Among these, the use of spores emerged as a promising strategy for long-term storage of whole-cell sensing systems at room temperature as well as in extreme environmental conditions.

Environmental applications of photoluminescence-based biosensors

For monitoring and treatment of soil and water, environmental scientists and engineers require measurements of the concentration of chemical contaminants. Although laboratory-based methods relying on gas or liquid chromatography can yield very accurate measurements, they are also complex, time consuming, expensive, and require sample pretreatment. Furthermore, they are not readily adapted for in situ measurements.Sensors are devices that can provide continuous, in situ measurements, ideally without the addition of reagents. A biosensor incorporates a biological component coupled to a transducer, which translates the interaction between the analyte and the biocomponent into a signal that can be processed and reported. A wide range of transducers have been employed in biosensors, the most common of which are electrochemical and optical. In this contribution, we focus on photoluminescence-based biosensors of potential use in the applications described above.Following a review of photoluminescence and a discussion of the optoelectronic hardware part of these biosensor systems, we provide explanations and examples of optical biosensors for specific chemical groups: hydrocarbons and alcohols, halogenated organics, nitro-, phospho-, sulfo-, and other substituted organics, and metals and other inorganics. We also describe approaches that have been taken to describe chemical mixtures as a whole (biological oxygen demand and toxicity) since most environmental samples contain mixtures of unknown (and changing) composition. Finally, we end with some thoughts on future research directions that are necessary to achieve the full potential of environmental biosensors.

Biosensor for organoarsenical herbicides and growth promoters

The toxic metalloid arsenic is widely distributed in food, water, and soil. While inorganic arsenic enters the environment primarily from geochemical sources, methylarsenicals either result from microbial biotransformation of inorganic arsenic or are introduced anthropogenically. Methylarsenicals such as monosodium methylarsonic acid (MSMA) have been extensively utilized as herbicides, and aromatic arsenicals such as roxarsone (Rox) are used as growth promoters for poultry and swine. Organoarsenicals are degraded to inorganic arsenic. The toxicological effects of arsenicals depend on their oxidation state, chemical composition, and bioavailability. Here we report that the active forms are the trivalent arsenic-containing species. We constructed a whole-cell biosensor utilizing a modified ArsR repressor that is highly selective toward trivalent methyl and aromatic arsenicals, with essentially no response to inorganic arsenic. The biosensor was adapted for in vitro detection of organoarsenicals using fluorescence anisotropy of ArsR-DNA interactions. It detects bacterial biomethylation of inorganic arsenite both in vivo and in vitro with detection limits of 10(-7) M and linearity to 10(-6) M for phenylarsenite and 5 × 10(-6) M for methylarsenite. The biosensor detects reduced forms of MSMA and roxarsone and offers a practical, low cost method for detecting activate forms and breakdown products of organoarsenical herbicides and growth promoters.

Pushing the Bacterial Envelope

Over the past three decades, a powerful array of techniques has been developed for expressing heterologous proteins and saccharides on the surface of bacteria. Surface-engineered bacteria, in turn, have proven useful in a variety of settings, including high-throughput screening, biofuel production, and vaccinology. In this chapter, we provide a comprehensive review of methods for displaying polypeptides and sugars on the bacterial cell surface, and discuss the many innovative applications these methods have found to date. While already an important biotechnological tool, we believe bacterial surface display may be further improved through integration with emerging methodology in other fields, such as protein engineering and synthetic chemistry. Ultimately, we envision bacterial display becoming a multidisciplinary platform with the potential to transform basic and applied research in bacteriology, biotechnology, and biomedicine.

Bioluminescent bioreporter for assessment of arsenic contamination in water samples of India

In the present study the most efficient R-factor controlling the ars operon was selected after screening of 39 Escherichia coli isolates by minimum inhibitory concentration test (MIC) studies from water samples of different geographical locations of India. Among all, strain isolated from Hooghly River (West Bengal) was found to have maximum tolerance towards arsenic and was further used for the development of bioreporter bacteria. Cloning of the ars regulatory element along with operator-promotor and luxCDABE from Photobacteria into expression vector has been accomplished by following recombinant DNA protocols. The bioreporter sensor system developed in this study can measure the estimated range of 0.74-60 mu g of As/L and is both specific and selective for sensing bioavailable As. The constructed bacterial biosensor was further used for the determination of arsenic ion concentration in different environmental samples of India.

Synthesis and properties of arsenic(III)-reactive coumarin-appended benzothiazolines: a new approach for inorganic arsenic detection

The EPA has established a maximum contaminant level (MCL) of 10 ppb for arsenic (As) in drinking water requiring sensitive and selective detection methodologies. To tackle this challenge, we have been active in constructing small molecules that react specifically with As(3+) to furnish a new fluorescent species (termed a chemodosimeter). We report in this contribution, the synthesis and spectroscopy of two small-molecule fluorescent probes that we term ArsenoFluors (or AFs) as As-specific chemodosimeters. The AFs (AF1 and AF2) incorporate a coumarin fluorescent reporter coupled with an As-reactive benzothiazoline functional group. AFs react with As(3+) to yield the highly fluorescent coumarin-6 dye (C6) resulting in a 20-25-fold fluorescence enhancement at λem ∼ 500 nm with detection limits of 0.14-0.23 ppb in tetrahydrofuran (THF) at 298 K. The AFs also react with common environmental As(3+) sources such as sodium arsenite in a THF/CHES (N-cyclohexyl-2-aminoethanesulfonic acid) (1:1, pH 9, 298 K) mixture resulting in a modest fluorescence turn-ON (1.5- to 3-fold) due to the quenched nature of coumarin-6 derivatives in high polarity solvents. Bulk analysis of the reaction of the AFs with As(3+) revealed that the C6 derivatives and the Schiff-base disulfide of the AFs (SB1 and SB2) are the ultimate end-products of this chemistry with the formation of C6 being the principle photoproduct responsible for the As(3+)-specific turn-ON. It appears that a likely species that is traversed in the reaction path is an As-hydride-ligand complex that is a putative intermediate in the proposed reaction path.

Tunable reporter signal production in feedback-uncoupled arsenic bioreporters

Escherichia coli-based bioreporters for arsenic detection are typically based on the natural feedback loop that controls ars operon transcription. Feedback loops are known to show a wide range linear response to the detriment of the overall amplification of the incoming signal. While being a favourable feature in controlling arsenic detoxification for the cell, a feedback loop is not necessarily the most optimal for obtaining highest sensitivity and response in a designed cellular reporter for arsenic detection. Here we systematically explore the effects of uncoupling the topology of arsenic sensing circuitry on the developed reporter signal as a function of arsenite concentration input. A model was developed to describe relative ArsR and GFP levels in feedback and uncoupled circuitry, which was used to explore new ArsR-based synthetic circuits. The expression of arsR was then placed under the control of a series of constitutive promoters, which differed in promoter strength, and which could be further modulated by TetR repression. Expression of the reporter gene was maintained under the ArsR-controlled Pars promoter. ArsR expression in the systems was measured by using ArsR-mCherry fusion proteins. We find that stronger constitutive ArsR production decreases arsenite-dependent EGFP output from Pars and vice versa. This leads to a tunable series of arsenite-dependent EGFP outputs in a variety of systematically characterized circuitries. The higher expression levels and sensitivities of the response curves in the uncoupled circuits may be useful for improving field-test assays using arsenic bioreporters.

Changes in Sb speciation with waterlogging of shooting range soils and impacts on plant uptake

A pot experiment was conducted to investigate the solubility and redox species of antimony (Sb) in a relocated shooting range soil and its uptake by Lolium perenne L. and Holcus lanatus L. under different water regimes. After 1-week waterlogging, the total Sb concentration in soil solution decreased from ∼110 μg L(-1) to <20 μg L(-1), and slowly increased over the following 4 weeks, with the dissolution of Fe and Mn (hydr)oxides. In this process, half of the Sb in soil solution was reduced to Sb(III), which greatly affected the plant uptake of Sb. Waterlogging increased shoot Sb concentrations of L. perenne by ∼10 fold but decreased uptake in H. lanatus by 80%. Results indicate that Sb might primarily be taken up as Sb(III) by L. perenne and as Sb(V) by H. lanatus. Temporary waterlogging of soil may increase the risk of trace elements entering the food chain.

Internal arsenite bioassay calibration using multiple bioreporter cell lines

Bioassays with bioreporter bacteria are usually calibrated with analyte solutions of known concentrations that are analysed along with the samples of interest. This is done as bioreporter output (the intensity of light, fluorescence or colour) does not only depend on the target concentration, but also on the incubation time and physiological activity of the cells in the assay. Comparing the bioreporter output with standardized colour tables in the field seems rather difficult and error‐prone. A new approach to control assay variations and improve application ease could be an internal calibration based on the use of multiple bioreporter cell lines with drastically different reporter protein outputs at a given analyte concentration. To test this concept, different Escherichia coli‐based bioreporter strains expressing either cytochrome c peroxidase (CCP, or CCP mutants) or β‐galactosidase upon induction with arsenite were constructed. The reporter strains differed either in the catalytic activity of the reporter protein (for CCP) or in the rates of reporter protein synthesis (for β‐galactosidase), which, indeed, resulted in output signals with different intensities at the same arsenite concentration. Hence, it was possible to use combinations of these cell lines to define arsenite concentration ranges at which none, one or more cell lines gave qualitative (yes/no) visible signals that were relatively independent of incubation time or bioreporter activity. The discriminated concentration ranges would fit very well with the current permissive (e.g. World Health Organization) levels of arsenite in drinking water (10 µg l⁻¹).

Bioluminescence and its impact on bioanalysis

There is an increasing need for versatile yet sensitive labels, posed by the demands for low detection in bioanalysis. Bioluminescent proteins have many desirable characteristics, including the ability to be detected at extremely low concentrations; no background interference from autofluorescent compounds present in samples; and compatibility with many miniaturized platforms, such as lab-on-a-chip and lab-on-a-CD systems. Bioluminescent proteins have found a plethora of analytical applications in intracellular monitoring, genetic regulation and detection, immuno- and binding assays, and whole-cell biosensors, among others. As new bioluminescent organisms are discovered and new bioluminescence proteins are characterized, use of these proteins will continue to dramatically improve our understanding of molecular and cellular events, as well as their applications for detection of environmental and biomedical samples.

Mixtures of environmental pollutants: effects on microorganisms and their activities in soils

Soil is the ultimate sink for most contaminants and rarely has only a single contaminant. More than is generally acknowledge, environmental pollutants exist as mixtures (organic-organic, inorganic-inorganic, and organic-inorganic). It is much more difficult to study chemical mixtures than individual chemicals, especially in the complex soil environment. Similarly, understanding the toxicity of a chemical mixture on different microbial species is much more complex, time consuming and expensive, because multiple testing designs are needed for an increased array of variables. Therefore, until now, scientific enquiries worldwide have extensively addressed the effects of only individual pollutants toward nontarget microorganisms. In this review, we emphasize the present status of research on (i) the environmental occurrence of pollutant mixtures; (ii) the interactions between pollutant mixtures and ecologically beneficial microorganisms; and (iii) the impact of such interactions on environmental quality. We also address the limitations of traditional cultivation based methods for monitoring the effects of pollutant mixtures on microorganisms. Long-term monitoring of the effects of pollutant mixtures on microorganisms, particularly in soil and aquatic ecosystems, has received little attention. Microbial communities that can degrade or can degrade or can develop tolerance to, or are inhibited by chemical mixtures greatly contribute to resilience and resistance in soil environments. We also stress in this review the important emerging trend associated with the employment of molecular methods for establishing the effects of pollutant mixtures on microbial communities. There is currently a lack of sufficient cogent toxicological data on chemical mixtures for making informed decision making in risk assessment by regulators. Therefore, not only more toxicology information on mixtures is needed but also there is an urgent need to generate sufficient, suitable, and long-term modeling data that have higher predictability when assessing pollutant mixture effects on microorganisms. Such data would improve risk assessment at contaminated sites and would help devise more effective bioremediation strategies.

Bioluminescence in the sea

Bioluminescence spans all oceanic dimensions and has evolved many times--from bacteria to fish--to powerfully influence behavioral and ecosystem dynamics. New methods and technology have brought great advances in understanding of the molecular basis of bioluminescence, its physiological control, and its significance in marine communities. Novel tools derived from understanding the chemistry of natural light-producing molecules have led to countless valuable applications, culminating recently in a related Nobel Prize. Marine organisms utilize bioluminescence for vital functions ranging from defense to reproduction. To understand these interactions and the distributions of luminous organisms, new instruments and platforms allow observations on individual to oceanographic scales. This review explores recent advances, including the chemical and molecular, phylogenetic and functional, community and oceanographic aspects of bioluminescence.

Escherichia coli, an Intestinal Microorganism, as a Biosensor for Quantification of Amino Acid Bioavailability

In animal diets optimal amino acid quantities and balance among amino acids is of great nutritional importance. Essential amino acid deficiencies have negative impacts on animal physiology, most often expressed in sub-optimal body weight gains. Over supplementation of diets with amino acids is costly and can increase the nitrogen emissions from animals. Although in vivo animal assays for quantification of amino acid bioavailability are well established, Escherichia coli-based bioassays are viable potential alternatives in terms of accuracy, cost, and time input. E. coli inhabits the gastrointestinal tract and although more abundant in colon, a relatively high titer of E. coli can also be isolated from the small intestine, where primary absorption of amino acids and peptides occur. After feed proteins are digested, liberated amino acids and small peptides are assimilated by both the small intestine and E. coli. The similar pattern of uptake is a necessary prerequisite to establish E. coli cells as accurate amino acid biosensors. In fact, amino acid transporters in both intestinal and E. coli cells are stereospecific, delivering only the respective biological l-forms. The presence of free amino- and carboxyl groups is critical for amino acid and dipeptide transport in both biological subjects. Di-, tri- and tetrapeptides can enter enterocytes; likewise only di-, tri- and tetrapeptides support E. coli growth. These similarities in addition to the well known bacterial genetics make E. coli an optimal bioassay microorganism for the assessment of nutritionally available amino acids in feeds.

Novel carotenoid-based biosensor for simple visual detection of arsenite: characterization and preliminary evaluation for environmental application

A novel whole-cell arsenite biosensor was developed using the photosynthetic bacterium Rhodopseudomonas palustris no. 7 and characterized. A sensor plasmid containing the operator-promoter region of the ars operon and arsR gene from Escherichia coli and the crtI gene from R. palustris no. 7 was introduced into a blue-green mutant with crtI deleted, R. palustris no. 711. The biosensor changed color in response to arsenite, and the change was obvious to the naked eye after 24 h without further manipulation. Real-time reverse transcription-PCR showed that the crtI mRNA was induced 3-fold at 3 h and 2.5-fold at 6 h after addition of 50 microg/liter arsenite compared with the no-arsenite control, and consistent with this, the relative levels of lycopene and rhodopin also increased compared with the control. Colorimetric analysis of the bacteria showed that the hue angle had clearly shifted from green-yellow toward red in an arsenic dose-dependent manner at 24 h after arsenite addition. This obvious shift occurred irrespective of the culture conditions before arsenite was added, indicating that the color change of the biosensor is stable in water samples containing various concentrations of dissolved oxygen. Finally, assays using samples prepared in various types of mineral water indicated that this biosensor could be used to screen groundwater samples for the presence of arsenite in a variety of locations, even where electricity is not available.

Characterization of the activity of heavy metal-responsive promoters in the cyanobacterium Synechocystis PCC 6803

Aiming at developing cyanobacterial-based biosensors for heavy metal detection, expression of heavy metal inducible genes of the cyanobacterium Synechocystis PCC 6803 was investigated by quantitative RT-PCR upon 15 minutes exposure to biologically relevant concentrations of Co2+, Zn2+, Ni2+, Cd2+, Cr6+, As3+ and As5+. The ziaA gene, which encodes a Zn2+-transporting P-type ATPase showed a markedly increased mRNA level after incubation with Cd2+ and arsenic ions, besides the expected induction by Zn2+ ions. The Co2+ efflux system-encoding gene coaT was strongly induced by Co2+ and Zn2+ ions, moderately induced by As3+ ions, and induced at a relatively low level by Cd2+ and As5+ ions. Expression of nrsB, which encodes a part of a putative Ni2+ efflux system was highly induced by Ni2+ salts and at a low extent by Co2+ and Zn2+ salts. The arsB gene, which encodes a putative arsenite-specific efflux pump was highly induced by As3+ and As5+ ions, while other metal salts provoked insignificant transcript level increase. The transcript of chrA, in spite of the high sequence similarity of its protein product with several bacterial chromate transporters, shows no induction upon Cr6+ salt exposure. We conclude that due to the largely unspecific heavy metal response of the studied genes only nrsB and arsB are potential candidates for biosensing applications for detection of Ni2+ and arsenic pollutants, respectively.

Retention of inorganic arsenic by coryneform mutant strains

The natural resistance mechanisms of corynebacteria to respond to the environments containing high levels of arsenic were successfully adopted to develop inexpensive and selective extractants for submicrogram amounts of arsenic. Kinetic and equilibrium characteristics were evaluated, and a preliminary exploration of the capability of these strains to be used for arsenic speciation was also made in this work. Three kinetics models were used to fit the experimental data. It was found that the pseudo-first-order kinetics model was not quite adequate to describe the retention process, while the intraparticle diffusion and the pseudo-second-order kinetics models provide the best fits. The equilibrium isotherm showed that the retention of arsenic was consistent with the Langmuir equation and that the Freundlich and Dubinin-Radushkevich models provided poorer fits to the experimental data. The maximum effective retention capacity for arsenic was about 15.4 ng As/mg biomass. The amount of arsenic retained was directly measured in the biomass by forward planning a slurry electrothermal atomic absorption spectrometric procedure.

Applications of whole-cell bacterial sensors in biotechnology and environmental science

Biosensors have major advantages over chemical or physical analyses with regard to specificity, sensitivity, and portability. Recently, many types of whole-cell bacterial biosensors have been developed using recombinant DNA technology. The bacteria are genetically engineered to respond to the presence of chemicals or physiological stresses by synthesizing a reporter protein, such as luciferase, beta-galactosidase, or green fluorescent protein. In addition to an overview of conventional biosensors, this minireview discusses a novel type of biosensor using a photosynthetic bacterium as the sensor strain and the crtA gene, which is responsible for carotenoid synthesis, as the reporter. Since bacteria possess a wide variety of stress-response mechanisms, including antioxidation, heat-shock responses, nutrient-starvation, and membrane-damage responses, DNA response elements for several stress-response proteins can be fused with various reporter genes to construct a versatile set of bacterial biosensors for a variety of analytes. Portable biosensors for on-site monitoring have been developed using a freeze-dried biosensing strain, and cell array biosensors have been designed for high-throughput analysis. Moreover, in the future, the use of single-cell biosensors will permit detailed analyses of samples. Signals from such sensors could be detected with digital imaging, epifluorescence microscopy, and/or flow cytometry.

Novel reporter gene in a fluorescent-based whole cell sensing system

A common problem encountered when using fluorescence detection in real samples analysis is that the matrix may contain compounds that autofluorescence or that can be excited at the wavelengths of commonly employed fluorescent reporter molecules. This causes an increase in background fluorescence, which in turn tends to compromise the detection limits of the system. To address this issue, we investigated the use of a reporter enzyme that produces fluorescent compounds, which can be excited at wavelengths that are not commonly encountered in compounds present in real samples. For that, a whole cell-based sensing system for arsenite that employs cobA as the reporter gene was developed. The system utilizes genetically engineered bacteria that incorporate the specificity of the ars operon with the sensitivity of the cobA gene. The cobA gene codes for uroporphyrinogen III methyltransferase that converts the substrate uroporphyrinogen (urogen) III into two fluorescent compounds sirohydrochlorin and trimethylpyrrocorphin. Urogen III is ubiquitous within the cell, however, because the cells use it for vitamin B12 and siroheme biosynthesis, this sensing system is limited by substrate availability. By supplementing the media with ALA, a precursor of urogen III, a more stable and reproducible response was obtained. We observed three excitation maxima at 357, 378, and 498 nm, with a single emission maximum at 605 nm. Excitation at 498 nm was selected because it results in less background interference as most endogenous substances are not active at this wavelength. Advantages and limitations of using the cobA gene in whole-cell sensing applications are presented.

Fluorescence-based sensing system for copper using genetically engineered living yeast cells

A whole cell-based optical sensing system for copper was developed based on Saccharomyces cerevisiae cells harboring plasmid pYEX-GFPuv. The basis of this system was the ability of the transcriptional activator protein Ace1 present in S. cerevisiae to control the expression of the reporter protein, GFPuv. When copper ions are present in the sample, the Ace1 protein activates the cup1 promoter located upstream from the gfpuv gene in plasmid pYEX-GFPuv, thus inducing the production of GFPuv. The concentration of copper ions in the sample can then be related to the GFPuv expressed in the yeast. The amount of GFPuv produced in the system was determined by monitoring the fluorescence emitted at 507 nm after excitation at 397 nm. This system can detect copper at concentrations as low as 5 x 10(-7) M, and is selective for copper over a variety of metal ions, with the exception of silver. The applicability of this sensing system to different analytical platforms and in real samples is demonstrated.

Whole-cell-reporter-gene-based biosensing systems on a compact disk microfluidics platform

Biosensing systems such as reporter-gene-based whole-cell assays are increasingly finding applications in biological and environmental screening. A whole-cell approach to such analyses can provide valuable information about the bioavailable level of a compound of interest. These biosensing systems rely on the molecular recognition of a specific analyte by a regulatory protein and, therefore, can detect low levels of the target analyte. In this study, Escherichia coli cells containing plasmid pSD10 were engineered to sense the model target analytes arsenite and antimonite, the target analytes in this study. The biosensing system takes advantage of the recognition of the regulatory protein, ArsR, for arsenite and antimonite to produce the reporter protein, which in this case is GFPuv. The fluorescence emitted by the GFPuv in the cells can be directly related to the concentration of the analyte in the cell, making this biosensing system useful in the detection of arsenite and/or antimonite in a variety of samples. Miniaturization of biosensing systems can further enhance their utility by decreasing reagent consumption and analysis time and by allowing for the high-throughput screening of samples. To that end, we employed a microcentrifugal microfluidics platform that has low power, space, and reagent requirements, increased speed of detection, and the potential for portability. Herein, we demonstrate for the first time the adaptation of a whole-cell sensing system to a microcentrifugal microfluidics platform. Moreover, we were able to detect our target analytes in a rapid and sensitive manner compared to conventional sensing methods.

Stress responsive bacteria: biosensors as environmental monitors

The delicate and dynamic balance of the physiological steady state and its maintenance is well characterized by studies of bacterial stress response. Through the use of genetic analysis, numerous stress regulons, their physiological regulators and their biochemical processes have been delineated. In particular, transcriptionally activated stress regulons are subjects of study and application. These regulons include those that respond to macromolecular damage and toxicity as well as to nutrient starvation. The convenience of reporter gene fusions has allowed the creation of biosensor strains, resulting from the fusion of stress-responsive promoters with a variety of reporter genes. Such cellular biosensors are being used for monitoring dynamic systems and can report the presence of environmental stressors in real time. They provide a greater range of sensitivity, e.g. to sub-lethal concentrations of toxicants, than the simple assessment of cell viability. The underlying physiological context of the reporter strains results in the detection of bioavailable concentrations of both toxicants and nutrients. Culture conditions and host strain genotypes can be customized so as to maximize the sensitivity of the strain for a particular application. Collections of specific strains that are grouped in panels are used to diagnose targets or mode of action for unknown toxicants. Further application in massive by parallel DNA and gene fusion arrays greatly extends the information available for diagnosis of modes of action and may lead to development of novel high-throughput screens. Future studies will include more panels, arrays, as well as single reporter cell detection for a better understanding of the population heterogeneity during stress response. New knowledge of physiology gained from further studies of novel systems, or using innovative methods of analysis, will undoubtedly yield still more useful and informative environmental biosensors.

Illuminating the detection chain of bacterial bioreporters

Engineering bacteria for measuring chemicals of environmental or toxicological concern (bioreporter bacteria) has grown slowly into a mature research area. Despite many potential advantages, current bioreporters do not perform well enough to comply with environmental detection standards. Basically, the reasons for this are the lack of engineering principles in the detection chain in the bioreporters. Here, we dissect critical steps in the detection chain and illustrate how bioreporter design could be improved by mutagenizing specificity and selectivity of the sensing and regulatory proteins, by newer expression strategies and application of different signalling networks. Furthermore, we describe how redesigning bioreporter assays with respect to pollutant transport into the cells and application of other detection devices can decrease detection limits and increase the speed of detection.

Enhanced arsenic accumulation in engineered bacterial cells expressing ArsR

The metalloregulatory protein ArsR, which offers high affinity and selectivity toward arsenite, was overexpressed in Escherichia coli in an attempt to increase the bioaccumulation of arsenic. Overproduction of ArsR resulted in elevated levels of arsenite bioaccumulation but also a severe reduction in cell growth. Incorporation of an elastin-like polypeptide as the fusion partner to ArsR (ELP153AR) improved cell growth by twofold without compromising the ability to accumulate arsenite. Resting cells overexpressing ELP153AR accumulated 5- and 60-fold-higher levels of arsenate and arsenite than control cells without ArsR overexpression. Conversely, no significant improvement in Cd(2+) or Zn(2+) accumulation was observed, validating the specificity of ArsR. The high affinity of ArsR allowed 100% removal of 50 ppb of arsenite from contaminated water with these engineered cells, providing a technology useful to comply with the newly approved U.S. Environmental Protection Agency limit of 10 ppb. These results open up the possibility of using cells overexpressing ArsR as an inexpensive, high-affinity ligand for arsenic removal from contaminated drinking and ground water.