Hydrogen Generation upon Nanocatalyzed Hydrolysis of Hydrogen-Rich Boron Derivatives: Recent Developments

Two-dimensional molybdenum boride coordinating with ruthenium nanoparticles to boost hydrogen generation from hydrolytic dehydrogenation of ammonia borane

The coordination between carrier and active metal is critical to the catalytic efficiency of ammonia borane (AB) hydrolysis reaction. In the present study, we report a new type of catalytic support based on molybdenum boride (MBene) MoAl1-xB and demonstrate that the effective combination of MoAl1-xB with Ru nanoparticles can realize the significantly enhanced performance for hydrogen generation. Owing to the efficient activation and dissociation of reactants, the optimal Ru/MoAl1-xB catalyst achieves the large turnover frequency of 494 molH2 molRu-1 min-1, high hydrogen generation rate of 119817 mL min-1 gRu-1 and favorable apparent activation energy of 39.2 kJ mol-1 for the catalytic hydrolysis of AB under alkaline-free condition. The isotopic test suggests the cleavage of OH bond in H2O is the rate-determining step for hydrolysis reaction, while the fracture of B-H bond in AB is also well revealed by attenuated total reflectance (ATR)-Fourier transform infrared (FTIR) spectroscopy. Significantly, the flexible on-demand hydrogen generation is achieved by using chemical switches for on-off AB hydrolysis. This study provides a new support platform based on two-dimensional MBene to exploit efficient catalysts to boost AB dehydrogenation.

Niobic acid as a support for microheterogeneous nanocatalysis of sodium borohydride hydrolysis under mild conditions

This study explores the stabilization by niobic acid, of Pt, Ni, Pd, and Au nanoparticles (NPs) for the efficient microheterogeneous catalysis of NaBH4 hydrolysis for hydrogen production. Niobic acid is the most widely studied Nb2O5 polymorph, and it is employed here for the first time for this key reaction relevant to green energy. Structural insights from XRD, Raman, and FTIR spectroscopies, combined with hydrogen production data, reveal the role of niobic acid's Brønsted acidity in its catalytic activity. The supported NPs showed significantly higher efficiency than the non-supported counterparts regarding turnover frequency, average hydrogen production rate, and cost. Among the tested NPs, PtNPs and NiNPs demonstrate the most favorable results. The data imply mechanism changes during the reaction, and the kinetic isotope assay indicates a primary isotope effect. Reusability assays demonstrate consistent yields over five cycles for PtNPs, although catalytic efficiency decreases, likely due to the formation of reaction byproducts.

Boron/nitrogen-trapping and regulative electronic states around Ru nanoparticles towards bifunctional hydrogen production

Developing a straightforward and general strategy to regulate the surface microenvironment of a carbon matrix enriched with N/B motifs for efficient atomic utilization and electronic state of metal sites in bifunctional hydrogen production via ammonia-borane hydrolysis (ABH) and water electrolysis is a persistent challenge. Herein, we present a simple, green, and universal approach to fabricate B/N co-doped porous carbons using ammonia-borane (AB) as a triple functional agent, eliminating the need for hazardous and explosive functional agents and complicated procedures. The pyrolysis of AB induces the regulation of the surface microenvironment of the carbon matrix, leading to the formation of abundant surface functional groups, defects, and pore structures. This regulation enhances the efficiency of atom utilization and the electronic state of the active component, resulting in improved bifunctional hydrogen evolution. Among the catalysts, B/N co-doped vulcan carbon (Ru/BNC) with 2.1 wt% Ru loading demonstrates the highest performance in catalytic hydrogen production from ABH, achieving an ultrahigh turnover frequency of 1854 min-1 (depending on the dispersion of Ru). Furthermore, this catalyst shows remarkable electrochemical activity for hydrogen evolution in alkaline water electrolysis with a low overpotential of 31 mV at 10 mA cm-2. The present study provides a simple, green, and universal method to regulate the surface microenvironment of various carbons with B/N modulators, thereby adjusting the atomic utilization and electronic state of active metals for enhanced bifunctional hydrogen evolution.

Fabrication of -SO3H-functionalized polyphosphazene-reinforced proton conductive matrix-mixed membranes

Proton exchange membranes (PEMs) have emerged as very promising membranes for automotive applications because of their notable proton conductivity at low temperatures. These membranes find extensive utilization in fuel cells. Several polymeric materials have been used, but their application is constrained by their expense and intricate synthetic processes. Affordable and efficient synthetic methods for polymeric materials are necessary for the widespread commercial use of PEM technology. The polymeric combination of hexachlorocyclotriphosphazene (HCCP) and 4,4-diamino-2,2-biphenyldisulfonic acid facilitated the synthesis of PP-(PhSO3H)2, a polyphosphazene with built-in -SO3H moieties. Characterization revealed that it was a porous organic polymer with high stability. PP-(PhSO3H)2 exhibited a proton conductivity of up to 8.24 × 10-2 S cm-1 (SD = ±0.031) at 353 K under 98% relative humidity (RH), which was more than two orders of magnitude higher than that of its -SO3H-free analogue, PP-(Ph)2 (2.32 × 10-4 S cm-1) (SD = ±0.019) under identical conditions. Therefore, for application in a PEM fuel cell, PP-(PhSO3H)2-based matrix-mixed membranes (PP-(PhSO3H)2-MMMs) were fabricated by mixing them with polyacrylonitrile (PAN) in various ratios. The proton conductivity could reach up to 6.11 × 10-2 S cm-1 (SD = ±0.0048) at 353 K and 98%RH, when the weight ratio of PP-(PhSO3H)2 : PAN was 3 : 1, the value of which was comparable with those of commercially available electrolytes used in PEM fuel cells. PP-(PhSO3H)2-MMM (3 : 1) had an extended lifetime of reusability. Using phosphazene and bisulfonated multiple-amine modules as precursors, we demonstrated that a porous organic polymer with a highly effective proton-conductive matrix-mixed membrane for PEM fuel cells could be produced readily by an intuitive polymeric reaction.

Spatial Confinement of Pt Nanoparticles in Carbon Nanotubes for Efficient and Selective H2 Evolution from Methanol

H2 generation from methanol-water mixtures often requires high pressure and high temperature (200-300 °C). However, CO can be easily generated and poison the catalytic system under such high temperature. Therefore, it is highly desirable to develop the efficient catalytic systems for H2 production from methanol at room temperature, even at sub-zero temperatures. Herein, carbon nanotube-supported Pt nanocomposites are designed and synthesized as high-performance nano-catalysts, via stabilization of Pt nanoparticles onto carbon nanotube (CNT), for H2 production upon methanol dehydrogenation at sub-zero temperatures. Therein, the optimal Pt/CNT nanocomposite presents the superior catalytic performance in H2 production upon methanol dehydrogenation at the expense of B2(OH)4, with the TOF of 299.51 min-130 oC. Compared with other common carriers, Pt/CNT exhibited the highest catalytic performance in H2 production, emphasizing the critical role of CNT in methanol dehydrogenation. The confinement of Pt nanoparticles by CNTs is conducive to inhibiting the aggregation of Pt nanoparticles, thereby significantly increasing its catalytic performance and stability. The kinetic study, detailed mechanistic insights, and density functional theory (DFT) calculation confirm that the breaking of O─H bond of CH3OH is the rate-controlling step for methanol dehydrogenation, and both H atoms of H2 are supplied by methanol. Interestingly, H2 is also successfully produced from methanol dehydrogenation at -10 °C, which absolutely solves the freezing problem in the H2 evolution upon water-splitting reaction.

Selective and efficient H2 evolution upon NH3BH3 hydrolysis at subzero temperatures

In the winter months, the temperature in most of the Earth stays below 0°C; the average temperature in winter at the South Pole is about -60°C. Therefore, it is urgent to develop efficient catalytic systems for selective and efficient H2 evolution upon NH3BH3 hydrolysis at subzero temperatures. For solving the freezing issue of water at below 0°C, herein, we have employed a facile and surfactant-free approach to synthesize M-Pt/C nanocomposites (M = Pd, Rh, Ru, Ni, Cu, or Fe), by the alloying of commercial Pt/C with Pd, Rh, Ru, Cu, Ni, or Fe for selective and efficient H2 evolution upon NH3BH3 hydrolysis in saline solution at below 0°C, even at -15°C. In addition, NH3BH3 hydrolysis over Pd-Pt/C in the saturated NaCl solution is utilized not only for safe hydrogen production but also for its in situ hydrogenation reduction in organic chemistry, which could avoid using dangerous hydrogen cylinders.

Boosting the Catalytic Performance of NiMoO4 Nanorods in H2 Generation upon NH3BH3 Hydrolysis via a Reduction Process

Although a range of noble metal catalysts, including Ru, Rh, Pd, Pt, and Au, have been developed for efficient H2 generation upon NH3BH3 hydrolysis at room temperature, this is a highly urgent need for exploring earth-abundant metal nanocatalysts for H2 generation upon NH3BH3 hydrolysis. Herein, a NaBH4 reduction strategy was developed to boost the catalytic performance of NiMoO4 nanorods in H2 generation upon NH3BH3 hydrolysis. Indeed, the pristine NiMoO4 nanorods were catalytically inert in NH3BH3 hydrolysis. Significantly, the reduced NiMoO4 nanorods presented excellent catalytic activity in H2 generation upon NH3BH3 hydrolysis, with a turnover frequency (TOF) of 31.2 L(H2)·gcat-1·h-1. Interestingly, the TOF of NH3BH3 hydrolysis over reduced NiMoO4 nanorods significantly increased from 31.2 to 53.6 L(H2)·gcat-1·h-1 under 0.3 M NaOH. The boosting catalytic performance of NiMoO4 nanorods via NaBH4 reduction in H2 generation might be attributed to the higher content of Oads and the formation of nickel boride in the reduced NiMoO4 nanorods. In this work, NH3BH3 hydrolysis over reduced NiMoO4 nanorods was not only used for safe H2 generation but also for its in situ tandem hydrogenation in organic chemistry.

Selective and controlled H2 generation upon additive-free HCOOH dehydrogenation over a Pd/NCS nanocatalyst

Although sodium formate is widely used as a conventional additive to enhance selective H2 evolution from HCOOH dehydrogenation, this leads to a waste of resources and an increase in the cost of H2 production. For this reason, N-doped carbon nanospheres with abundant graphitic C/N have been designed to enrich the electron cloud density of the Pd atom for improving its catalytic activity in H2 generation upon additive-free HCOOH dehydrogenation. Herein, we have synthesized N-doped carbon nanosphere-stabilized Pd nanoparticles (Pd/NCSs) as high-efficiency nano-catalysts, via fixation of Pd nanoparticles onto N-doped carbon nanospheres (NCSs), for selective and controlled H2 generation upon additive-free HCOOH dehydrogenation. Pd/NCS-800 (1640 h-1) provided a 12 times larger TOF than commercial Pd/C (134 h-1) in H2 generation upon additive-free HCOOH dehydrogenation. It seemed that graphitic N/C of NCS-800 enriched the electron cloud density of the Pd atom, which was favorable for the cleavage of C-H bonds in HCOOH dehydrogenation. In addition, the selective H2 evolution from additive-free HCOOH dehydrogenation over Pd/NCS-800 is successfully controlled by adjusting the pH.

Modulating Electronic Metal-Support Interactions to Boost Visible-Light-Driven Hydrolysis of Ammonia Borane: Nickel-Platinum Nanoparticles Supported on Phosphorus-Doped Titania

Ammonia borane (AB) is a promising material for chemical H2 storage owing to its high H2 density (up to 19.6 wt %). However, the development of an efficient catalyst for driving H2 evolution through AB hydrolysis remains challenging. Therefore, a visible-light-driven strategy for generating H2 through AB hydrolysis was implemented in this study using Ni-Pt nanoparticles supported on phosphorus-doped TiO2 (Ni-Pt/P-TiO2 ) as photocatalysts. Through surface engineering, P-TiO2 was prepared by phytic-acid-assisted phosphorization and then employed as an ideal support for immobilizing Ni-Pt nanoparticles via a facile co-reduction strategy. Under visible-light irradiation at 283 K, Ni40 Pt60 /P-TiO2 exhibited improved recyclability and a high turnover frequency of 967.8 molH 2 ${{_{{\rm H}{_{2}}}}}$  molPt -1  min-1 . Characterization experiments and density functional theory calculations indicated that the enhanced performance of Ni40 Pt60 /P-TiO2 originated from a combination of the Ni-Pt alloying effect, the Mott-Schottky junction at the metal-semiconductor interface, and strong metal-support interactions. These findings not only underscore the benefits of utilizing multipronged effects to construct highly active AB-hydrolyzing catalysts, but also pave a path toward designing high-performance catalysts by surface engineering to modulate the electronic metal-support interactions for other visible-light-induced reactions.

The Competition between 4-Nitrophenol Reduction and BH4- Hydrolysis on Metal Nanoparticle Catalysts

Assessing competitive environmental catalytic reduction processes via NaBH4 is essential, as BH4- is both an energy carrier (as H2) and a reducing agent. A comprehensive catalytic study of the competition between the borohydride hydrolysis reaction (BHR, releasing H2) and 4-nitrophenol reduction via BH4- on M0- and M/M' (alloy)-nanoparticle catalysts is reported. The results reveal an inverse correlation between the catalytic efficiency for BH4- hydrolysis and 4-nitrophenol reduction, indicating that catalysts performing well in one process exhibit lower activity in the other. Plausible catalytic mechanisms are discussed, focusing on the impact of reaction products such as 4-aminophenol and borate on the rate and yield of BH4- hydrolysis. The investigated catalysts were Ag0, Au0, Pt0, and Ag/Pt-alloy nanoparticles synthesized without any added stabilizer. Notably, the observed rate constants for the 4-nitrophenol reduction on Ag0, Ag-Pt (9:1), and Au0 are significantly higher than the corresponding rate constants for BH4- hydrolysis, suggesting that most reductions do not proceed through surface-adsorbed hydrogen atoms, as observed for Pt0 nanoparticles. This research emphasizes the conflicting nature of BH4- hydrolysis and reduction processes, provides insights for designing improved catalysts for competitive reactions, and sheds light on the catalyst properties required for each specific process.

From sandwich complexes to dendrimers: journey toward applications to sensing, molecular electronics, materials science, and biomedicine

This review links various areas of inorganic chemistry around the themes developed by our research group during the last four decades. It is firstly based on the electronic structure of iron sandwich complexes, showing how the metal electron count dictates their reactivities, with various applications (via C-H activation, C-C bond formation) as reducing and oxidizing agents, redox and electrocatalysts and precursors of dendrimers and catalyst templates through bursting reactions. Various electron-transfer processes and consequences are explored, including the influence of the redox state on the acidity of robust ligands and the possibility to iterate in situ C-H activation and C-C bond formation to build arene-cored dendrimers. Examples of how these dendrimers are functionalized are illustrated using the cross olefin metathesis reactions, with application to the synthesis of soft nanomaterials and biomaterials. Mixed and average valence complexes give rise to remarkable subsequent organometallic reactions, including the salt influence on these reactions. The stereo-electronic aspect of these mixed valencies is pointed out in star-shaped multi-ferrocenes with a frustration effect and other multi-organoiron systems, with the perspective of understanding electron-transfer processes among dendrimer redox sites involving electrostatic effects and application to redox sensing and polymer metallocene batteries. Dendritic redox sensing is summarized for biologically relevant anions such as ATP^2- with supramolecular exoreceptor interactions at the dendrimer periphery in parallel with the seminal work on metallocene-derived endoreceptors by Beer's group. This aspect includes the design of the first metallodendrimers that have applications in both redox sensing and micellar catalysis with nanoparticles. These properties provide the opportunity to summarize the biomedical (mostly anticancer) applications of ferrocenes, dendrimers and dendritic ferrocenes in biomedicine (in particular the contribution from our group, but not only). Finally, the use of dendrimers as templates for catalysis is illustrated with numerous reactions including C-C bond formation, click reactions and H₂ production reactions.

Facile construction of robust Ru-Co3O4 Mott-Schottky catalyst enabling efficient dehydrogenation of ammonia borane for hydrogen generation

Developing efficient catalysts for the dehydrogenation of ammonia borane (AB) is important for the safe storage and controlled release of hydrogen, but it is a challenging task. In this study, we designed a robust Ru-Co₃O₄ catalyst using the Mott-Schottky effect to induce favorable charge rearrangement. The self-created electron-rich Co₃O₄ and electron-deficient Ru sites at heterointerfaces are indispensable for the activation of the B-H bond in NH₃BH₃ and the OH bond in H₂O, respectively. The synergistic electronic interaction between the electron-rich Co₃O₄ and electron-deficient Ru sites at the heterointerfaces resulted in an optimal Ru-Co₃O₄ heterostructure that exhibited outstanding catalytic activity for the hydrolysis of AB in the presence of NaOH. The heterostructure had an extremely high hydrogen generation rate (HGR) of 12238 mL min^-1 g_cat^-1 and an expected high turnover frequency (TOF) of 755 mol_H2 mol_Ru^-1 min^-1 at 298 K. The activation energy needed for the hydrolysis was low (36.65 kJ mol^-1). This study opens up a new avenue for the rational design of high-performance catalysts for AB dehydrogenation based on the Mott-Schottky effect.

Colloidal metal nanocatalysts to advance orange II hydrogenolysis tracked by a microplate reader

The thermal reduction method was applied to synthesize metal nanoparticles using poly(1-vinyl-2-pyrrolidone) as an organic stabilizer to control metal nanoparticle agglomeration. Colloidal metal nanoparticles, gold, palladium, and gold–palladium nanoparticles were synthesized, and UV–visible spectrophotometry and high-resolution transmission electron microscopy analyses were conducted to characterize them. The metal nanoparticle micrographs showed well-dispersed particles with an average size of 9.6 nm (Au), 15.4 nm (Pd), and 10.6 nm (AuPd). All the colloidal metal nanoparticles served as nanocatalysts to advance a reductive degradation of orange II in presence of borohydride ions. For a prompt screening of catalytic activity, the microplate reader system was considered at a fixed maximum absorbance wavelength of λ 489 nm respected by orange II. Excess borohydride ions were used to construct pseudo-first kinetic conditions. The Langmuir–Hinshelwood model allowed the finding of kinetic activity on the surface of metal nanoparticles. AuPd nanocatalyst interface exhibited low activation energy (5.38 kJ mol−1) compared to the one on Au (8.19 kJ mol−1) and Pd (7.23 kJ mol−1).

Graphical Abstract

"On-Off" Control for On-Demand H2 Release upon Dimethylamineborane Hydrolysis over Ru0.8Ni0.2/MoS2 Nanohybrids

In spite of the fact that remarkable developments are achieved in the design and development of novel nanocatalysts for H₂ release upon dimethylamineborane hydrolysis, the development of an "on-off" switch for demand-based H₂ evolution upon dimethylamineborane hydrolysis is still a matter of supreme importance, however. Herein, we synthesized a string of MoS₂ nanosheet-supported RuNi bimetallic nanohybrids (Ru_xNi_1-x/MoS₂), by fixation of RuNi nanoparticles at the MoS₂ surface, for the H₂ evolution upon the hydrolysis of dimethylamineborane at 30 °C. For safely and effectively generating, transporting, and storing H₂ gas, the selective "on-off" switch for on-demand H₂ evolution upon dimethylamineborane hydrolysis over the Ru_0.8Ni_0.2/MoS₂ nanohybrid has been successfully realized by the Zn²⁺/EDTA-2Na system. In particular, the H₂ evolution is totally switched off by adding Zn(NO₃)₂. It seems that Zn²⁺ ions are attached and anchored at the Ru_0.8Ni_0.2/MoS₂ surface, inhibiting their surface-active sites, leading to the termination of H₂ evolution. Then, the H₂ generation is subsequently reactivated by adding the EDTA-2Na solution because of its excellent coordination ability with Zn²⁺ ions. This study not only offers a new and efficient RuNi nanocatalyst for dimethylamineborane hydrolysis but also proposes a new method for the demand-based H₂ production.

Ultrafine Pt nanoparticles anchored on core-shell structured zeolite-carbon for efficient catalysis of hydrogen generation

Ammonia borane (AB) is a potential hydrogen storage material with high-efficiency hydrolytic dehydrogenation under a suitable catalyst. Noble metal catalysts have drawn a lot of attention. In this study, a carbon-coated zeolite was obtained by calcination at high temperatures using glucose as a carbon source. Pt nanoparticles were fixed on a core-shell composite support by a simple chemical reduction method. A series of catalysts were prepared with different synthesis parameters. The results show that PSC-2 has excellent catalytic performance for hydrolytic dehydrogenation of AB in alkaline solution at room temperature, and the turnover frequency (TOF) is 593 min^-1. The excellent catalytic performance is attributed to the carbon layer on the zeolite surface which inhibits the aggregation or deformation of metals in the catalytic reaction. The metal-support interaction activates the water and accelerates the rate-limiting step of hydrolysis. The activation energy (E _a = 44 kJ mol^-1) was calculated based on the reaction temperature. In addition, the kinetics of AB hydrolysis was studied, and the effects of catalyst concentration, AB concentration and NaOH concentration on AB hydrolysis rate were further investigated. The high-efficiency catalyst prepared in this work provides a new strategy for the development of chemical hydrogen production in the field of catalysis.

The Catalytic Performance of Nanorod Nickel Catalyst in the Hydrolysis of Lithium Borohydride and Dimethylamine Borane

In the current global energy crisis, the value of hydrogen has become better appreciated. Metal borohydrides attract a lot of attention from researchers because they are rich in hydrogen. In this study, glass microscope slides were coated with nickel as nanorods for use as a catalyst by the magnetron sputtering method, and then catalytic hydrolysis reactions of dimethylamine borane and lithium borohydride were carried out to produce hydrogen. Parameters such as temperature, the amount of catalyst, lithium borohydride, or dimethylamine borane concentration were varied and their effects on the catalytic performances of the catalyst were examined. Moreover, the catalyst was characterized by field emission scanning electron microscopy and X-ray diffraction, and hydrolysis products were analyzed through field emission scanning electron microscopy with energy dispersive spectroscopy analyses. Reaction kinetic parameters were also determined. The activation energy values of dimethylamine borane and lithium borohydride were determined to be 40.0 kJ mol−1 and 63.74 kJ mol−1, respectively. Activation enthalpy values were also calculated as 37.34 kJ mol−1 and 62.45 kJ mol−1 for dimethylamine borane and lithium borohydride, respectively. Initial hydrogen production rates under different conditions were also investigated in the study. For both hydrolysis systems, the fastest hydrogen production rates were calculated as 109 mL gNi−1 min−1 and 103 mL gNi−1 min−1 for dimethylamine borane and lithium borohydride, respectively, in the experiment performed at 60 °C at 0.2 M substrate concentration and with 1.3 g of catalyst. These hydrolysis systems using this catalyst are good candidates for systems that need hydrogen.

The electronic structures of non-metal (N, S) doped cobalt phosphide catalysts and the catalytic mechanism for the hydrogen evolution reaction of ammonia borane: a theoretical study

The electronic structures of non-metal (N, S) doped CoP catalysts and the mechanism of the hydrogen evolution reaction of ammonia borane catalyzed by three catalysts were studied using density functional theory.

Modular Flow Reactors for Valorization of Kraft Lignin and Low-Voltage Hydrogen Production

Recent studies have found that green hydrogen production and biomass utilization technologies can be combined to efficiently produce both hydrogen and value-added chemicals using biomass as an electron and proton source. However, the majority of them have been limited to proof-of-concept demonstrations based on batch systems. Here the authors report the design of modular flow systems for the continuous depolymerization and valorization of lignin and low-voltage hydrogen production. A redox-active phosphomolybdic acid is used as a catalyst to depolymerize lignin with the production of aromatic compounds and extraction of electrons for hydrogen production. Individual processes for lignin depolymerization, byproduct separation, and hydrogen production with catalyst reactivation are modularized and integrated to perform the entire process in the serial flow. Consequently, this work enabled a one-flow process from biomass conversion to hydrogen gas generation under a cyclic loop. In addition, the unique advantages of the fluidic system (i.e., effective mass and heat transfer) substantially improved the yield and efficiency, leading to hydrogen production at a higher current density (20.5 mA cm^-2 ) at a lower voltage (1.5 V) without oxygen evolution. This sustainable eco-chemical platform envisages scalable co-production of valuable chemicals and green hydrogen for industrial purposes in an energy-saving and safe manner.

Highly Effective Proton-Conductive Matrix-Mixed Membrane Based on a -SO3H-Functionalized Polyphosphazene

A polyphosphazene with in-built -SO₃H moieties (PP-PhSO₃H) was facilely synthesized by the polymeric combination of hexachlorocyclotriphosphazene (HCCP) and sulfonate p-phenylenediamine. Characterization reveals that it is a highly stable amorphous polymer. Proton conductivity investigations showed that the synthesized PP-PhSO₃H exhibits a proton conductivity of up to 6.64 × 10^-2 S cm^-1 at 353 K and 98% relative humidity (RH). This value is almost 2 orders of magnitude higher than the corresponding value for its -SO₃H-free analogue, PP-Ph, which is 1.72 × 10^-4 S cm^-1 when measured under the same condition. Consequently, matrix-mixed membranes (labeled PP-PhSO₃H-PAN) were further prepared by mixing PP-PhSO₃H with polyacrylonitrile (PAN) in different ratios to test its potential application in the proton-exchange membrane (PEM) fuel cell. The analysis results indicate that when the weight ratio of PP-PhSO₃H/PAN is 3:1 [named PP-PhSO₃H-PAN (3:1)], its proton conductivity can reach up to 5.05 × 10^-2 S cm^-1 at 353 K and 98% RH, which is even comparable with those of proton-conductive electrolytes currently used in PEM fuel cells. Furthermore, the continuous test demonstrates that the PP-PhSO₃H-PAN (3:1) has long-life reusability. This research reveals that by using phosphazene and sulfonated multiple-amine modules as precursors, organic polymers with excellent proton conductivity for the assembly of matrix-mixed membranes in PEM fuel cells can be easily synthesized by a simple polymeric process.

Synthesis, Formation Mechanism, and Structure of K[BH3S(CH3)BH3] and Its Application in Preparation of KB3H8

The design, synthesis, and applications of new boranes are eternal topics in boron chemistry. A new bis(borane)alkanethiolate salt, K[BH₃S(CH₃)BH₃], was synthesized in high yield by the reaction of K with (CH₃)₂S·BH₃ at room temperature. The formation mechanism was elucidated based on experimental and theoretical studies. The single-crystal structure of the K[BH₃S(CH₃)BH₃]·18-crown-6 adduct was determined in which the B-S-B bonding information of K[BH₃S(CH₃)BH₃] was illustrated for the first time. Using K[BH₃S(CH₃)BH₃] as a starting material, KB₃H₈ was successfully synthesized.

Facile construction of a highly proton-conductive matrix-mixed membrane based on a -SO3H functionalized polyamide

Developing a facile strategy to construct low-cost and efficient proton-conductive electrolytes is pivotal in the practical application of proton exchange membrane (PEM) fuel cells. Herein, a polyamide with in-built -SO₃H moieties, PA(PhSO3H)2, was synthesized via a simple one-pot polymeric acylation process. Investigations via electrochemical impedance spectroscopy (EIS) measurements revealed that the fabricated PA(PhSO3H)2 displays a proton conductivity of up to 5.54 × 10^-2 S cm^-1 at 353 K under 98% relative humidity (RH), which is more than 2 orders of magnitude higher than that of its -SO₃H-free analogue PA(Ph)2 (2.38 × 10^-4 S cm^-1) under the same conditions. Therefore, after mixing with polyacrylonitrile (PAN) at different ratios, PA(PhSO3H)2-based matrix-mixed membranes were subsequently made and the analysis results revealed that the proton conductivity can reach up to 5.82 × 10^-2 S cm^-1 at 353 K and 98% RH when the weight ratio of PA(PhSO3H)2 : PAN is in 3 : 1 (labeled as PA(PhSO3H)2-PAN(3 : 1)), the value of which is comparable even to those of commercially available electrolytes that are used in PEM fuel cells. In addition, continuous testing shows that PA(PhSO3H)2-PAN(3 : 1) possesses long-life reusability. This work demonstrates that, utilizing the simple reaction of polymeric acylation with a sulfonated module as a precursor, highly effective proton-conductive membranes for PEM fuel cells can be achieved in a facile manner.

Highly Effective Proton-Conduction Matrix-Mixed Membrane Derived from an -SO3H Functionalized Polyamide

Developing a low-cost and effective proton-conductive electrolyte to meet the requirements of the large-scale manufacturing of proton exchange membrane (PEM) fuel cells is of great significance in progressing towards the upcoming “hydrogen economy” society. Herein, utilizing the one-pot acylation polymeric combination of acyl chloride and amine precursors, a polyamide with in-built -SO₃H moieties (PA-PhSO₃H) was facilely synthesized. Characterization shows that it possesses a porous feature and a high stability at the practical operating conditions of PEM fuel cells. Investigations of electrochemical impedance spectroscopy (EIS) measurements revealed that the fabricated PA-PhSO₃H displays a proton conductivity of up to 8.85 × 10⁻² S·cm⁻¹ at 353 K under 98% relative humidity (RH), which is more than two orders of magnitude higher than that of its -SO₃H-free analogue, PA-Ph (6.30 × 10⁻⁴ S·cm⁻¹), under the same conditions. Therefore, matrix-mixed membranes were fabricated by mixing with polyacrylonitrile (PAN) in different ratios, and the EIS analyses revealed that its proton conductivity can reach up to 4.90 × 10⁻² S·cm⁻¹ at 353 K and a 98% relative humidity (RH) when the weight ratio of PA-PhSO₃H:PAN is 3:1 (labeled as PA-PhSO₃H-PAN (3:1)), the value of which is even comparable with those of commercial-available electrolytes being used in PEM fuel cells. Additionally, continuous tests showed that PA-PhSO₃H-PAN (3:1) possesses a long-life reusability. This work demonstrates, using the simple acylation reaction with the sulfonated module as precursor, that low-cost and highly effective proton-conductive electrolytes for PEM fuel cells can be facilely achieved.

Alkaline ultrasonic irradiation-mediated boosted H2 production over O/N-rich porous carbon anchored Ru nanoclusters

Developing efficient catalytic systems to boost hydrogen evolution from hydrolytic dehydrogenation of ammonia borane (AB) is of broad interest but remains a formidable challenge since the widespread usages of hydrogen have been considered as sustainable solutions to ensure future energy security. Herein, we developed an alkaline ultrasonic irradiation-mediated catalytic system with O/N-rich porous carbon supported Ru nanoclusters (NCs) (Ru/ONPC) to considerably boost the catalytic activity for hydrogen production from the hydrolytic dehydrogenation of AB. The uniformly distributed sub-2.0 nm Ru NCs on the ONPC were demonstrated to be efficient catalysts to boost hydrogen generation from the hydrolytic dehydrogenation of AB with the synergistic effect between ultrasonic irradiation and alkaline additive without any additional heating. An ultrahigh turnover frequency (TOF) of 4004 min^-1 was achieved in the developed catalytic system, which was significantly higher than that of ultrasound-mediated AB hydrolysis without alkali (TOF: 485 min^-1) and alkaline AB hydrolysis (TOF: 1747 min^-1) without ultrasound mixing. The alkaline ultrasonic irradiation was beneficial for the cleavage of the OH bonds in the attacked H₂O molecules catalyzed by the Ru/ONPC and thus considerably boost the catalytic hydrogen generation from AB. This study provides a tractable and ecofriendly pathway to promote the activity toward AB hydrolysis to release hydrogen.

Mechanistic insights into H2 evolution via water splitting at the expense of B2(OH)4: a theoretical study

H₂ has been comprehensively deemed a promising potential candidate to replace traditional fossil fuel-based energy. Typically, the hydrolysis of most hydrogen-rich boron hydrides (e.g. NaBH₄, NH₃BH₃ and Me₂NHBH₃) catalyzed by nanomaterials generates H₂ with only one H atom supplied by water and the other one by a hydrogen-rich boron hydride. Interestingly, both H atoms of produced H₂ are provided by water upon hydrolysis of B₂(OH)₄. Herein, the catalytic mechanisms of H₂ evolution upon water splitting at the expense of B₂(OH)₄ in its hydrolysis reactions catalyzed by acid, base or metal nanoparticles have been investigated by density functional theory (DFT) calculations. By computational studies, the mechanisms of catalysis by base and metal nanoparticles are basically the same as those speculated from our previous experiments. The previously proposed acid catalytic mechanism has been overturned, however. This study not only provides important insights into the catalytic mechanism for water splitting at the expense of B₂(OH)₄, but also opens up an exciting opportunity to use water to store H₂.

Hydrolysis of the Borohydride Anion BH4−: A 11B NMR Study Showing the Formation of Short-Living Reaction Intermediates including BH3OH−

In hydrolysis and electro-oxidation of the borohydride anion BH4−, key reactions in the field of energy, one critical short-living intermediate is BH3OH−. When water was used as both solvent and reactant, only BH3OH− is detected by 11B NMR. By moving away from such conditions and using DMF as solvent and water as reactant in excess, four 11B NMR quartets were observed. These signals were due to BH3-based intermediates as suggested by theoretical calculations; they were DMF·BH3, BH3OH−, and B2H7− (i.e., [H3B−H−BH3]− or [H4B−BH3]−). Our results shed light on the importance of BH3 stemming from BH4− and on its capacity as Lewis acid to interact with Lewis bases such as DMF, OH−, and BH4−. These findings are important for a better understanding at the molecular level of hydrolysis of BH4− and production of impurities in boranes synthesis.

Facile Fabrication of a Foamed Ag3CuS2 Film as an Efficient Self-Supporting Electrocatalyst for Ammonia Electrolysis Producing Hydrogen

Ammonia (NH₃) is one of the hydrogen carriers that has received extensive attention due to its high hydrogen content and carbon-free nature. The ammonia electro-oxidation reaction (AOR) and the liquid AOR (LAOR) are integral parts of an ammonia-based energy system. The exploration of low-cost and efficient electrocatalysts for the AOR and LAOR is very important but very difficult. In this work, a novel self-supporting AOR and LAOR bifunctional electrocatalyst of a Ag₃CuS₂ film is synthesized by a simple hydrothermal method. The Ag₃CuS₂ film without a substrate shows efficient catalytic activity and enhanced stability for NH₃ electrolysis in both aqueous ammonia solution and liquid ammonia, including an onset potential of 0.7 V for the AOR and an onset potential of 0.4 V for the LAOR. The density functional theory calculations prove that compared to Cu atoms, Ag atoms with appropriate charge density on the surface of Ag₃CuS₂ are more electrocatalytically active for NH₃ splitting, including the low energy barrier in the rate-determining *NH₃ dehydrogenation step and the spontaneous tendency in the N₂ desorption process. Overall, the foamed Ag₃CuS₂ film is one of prospective low-cost and stable electrocatalysts for the AOR and LAOR, and the self-supporting strategy without a substrate provides more perspectives to tailor more meaningful and powerful electrocatalysts.

Metal-Support Synergistic Catalysis in Pt/MoO3-x Nanorods toward Ammonia Borane Hydrolysis with Efficient Hydrogen Generation

Ammonia borane (NH₃BH₃, AB) serves as a promising material for chemical storage of hydrogen owing to its high hydrogen density and superior stability, in which the development of highly efficient heterogeneous catalysts toward AB hydrolysis plays a crucial role. Herein, we report Pt atomic clusters supported on MoO_3-x nanorods using a two-step process: MoO_3-x nanorods were synthesized at various calcination temperatures, followed by a further deposition-precipitation approach to obtain Pt/MoO_3-x catalysts (denoted as Pt/MoO_3-x-T, T = 300, 400, 500, and 600 °C). The optimized Pt/MoO_3-x-500 catalyst exhibits a prominent catalytic performance toward hydrolytic dehydrogenation of AB for H₂ generation, with a turnover frequency value of 2268.6 min^-1, which stands at the top level among the reported catalysts. Moreover, the catalyst shows a remarkable stability with 90% activity remaining after five cycles. A combination investigation including HR-TEM, ac-HAADF-STEM, XPS, in situ CO-IR, XANES, and Bader charge analysis verifies the formation of Pt²⁺-O_v-Mo⁵⁺ (O_v represents oxygen vacancy), whose concentration is dependent on the strength of the metal-support interaction. Studies on the structure-property correlation based on an isotopic kinetic experiment, in situ FT-IR, and DFT calculations further reveal that the Mo⁵⁺-O_v sites accelerate the dissociation of H₂O molecules (rate-determining step), while the adjacent Pt²⁺ species facilitates the cleavage of the B-H bond in the AB molecule to produce H₂. This work provides a fundamental and systematic understanding on the metal-support synergistic catalysis toward robust H₂ production, which is constructive for hydrogen storage and energy catalysis.

Dehydrogenation of ammonia-borane to functionalize neutral and Li+-encapsulated C60, C70 and C36 fullerene cages: a DFT approach

Mechanistic investigations into the functionalization of three fullerene cages, viz. C₆₀, C₇₀, and C₃₆ through dehydrogenation of ammonia-borane (AB) have been conducted using Density Functional Theory (DFT). In this process of functionalization, different ring fusions, namely (6-6), (6-5) positions for C₆₀ and C₇₀, and an additional (5-5) for C₃₆ fullerene have been investigated. The optimized geometries of all the complexes and transition states have been characterized using the M06-2X functional in conjunction with the 6-31G(d) basis set. The effect of Li⁺-encapsulation on the energetics and activation barriers of H₂ attachment has also been examined. Although the process of functionalization of neutral fullerenes proceeds extensively through concerted pathways, a step-wise route has been observed for the encapsulated systems. NPA charge analysis and Wiberg bond index (WBI) have been used in order to detect the change in the nature of participating hydrogen atoms and validate the variation in the bond order of the C-C connectivity respectively upon hydrogenation. GCRD parameters have also been calculated to explicate the electronic properties of the hydrogenated products. The (6-6) hydrogenation is observed to be favoured thermodynamically and kinetically for both neutral and Li⁺-encapsulated C₆₀ and C₇₀, while (5-5) is found to be the most preferred site for C₃₆ systems. Our theoretical exploration suggests that the covalent functionalization of the fullerene cages can be done successfully viaAB resulting in the stabilization of these systems. In short, the present work will provide a general idea about the detailed mechanism related to the functionalization of fullerene cages, which will further motivate researchers in fullerene chemistry.

Architecture engineering of nanostructured catalyst via layer-by-layer adornment of multiple nanocatalysts on silica nanorod arrays for hydrogenation of nitroarenes

Direct consideration for both, the catalytically active species and the host materials provides highly efficient strategies for the architecture design of nanostructured catalysts. The conventional wet chemical methods have limitations in achieving such unique layer-by-layer design possessing one body framework with many catalyst parts. Herein, an innovative physical method is presented that allows the well-regulated architecture design for an array of functional nanocatalysts as exemplified by layer-by-layer adornment of Pd nanoparticles (NPs) on the highly arrayed silica nanorods. This spatially confined catalyst exhibits excellent efficiency for the hydrogenation of nitroarenes and widely deployed Suzuki cross-coupling reactions; their facile separation from the reaction mixtures is easily accomplished due to the monolithic structure. The generality of this method for the introduction of other metal source has also been demonstrated with Au NPs. This pioneering effort highlights the feasibility of physically controlled architecture design of nanostructured catalysts which may stimulate further studies in the general domain of the heterogeneous catalytic transformations.

Efficient and Controlled H2 Release from Sodium Formate

Sodium formate (SF) has been used for a long time as a technological additive for H2 release from the dehydrogenation of formic acid . Formic acid is often synthesized from...

Cobalt sandwich-stabilized rhodium nanocatalysts for ammonia borane and tetrahydroxydiboron hydrolysis

A bulky organocobalt sandwich-supported Rh nanoparticle is an efficient, stable and recyclable nanocatalyst for hydrolysis of both ammonia borane and tetrahydroxydiboron to H2.

Pd, Rh and Ru Nanohybrid-catalyzed Tetramethyldisiloxane Hydroysis for H2 Generation, Nitrophenol Reduction and Suzuki-Miyaura Cross-Coupling

The hydrolysis of tetramethyldisiloxane, which is a silicone industrial refuse, provides a convenient method to generates H2 on demand. Herein, the highly selective and efficient 2D graphene-like carbon nanosheets (GCN)...

Maximizing Metal-Support Interactions in Pt/Co3O4 Nanocages to Simultaneously Boost Hydrogen Production Activity and Durability

Catalytic hydrolysis of ammonia borane (AB) provides an effective way to generate pure H₂ at ambient temperature for fuel cells. Pt-based catalysts usually exhibit great initial activity toward this reaction but deactivate quickly. Here, we report that the metal-support interactions in Pt/Co₃O₄ nanocages can simultaneously accelerate the H₂ generation and enhance the catalyst's stability. The Pt/Co₃O₄ catalyst is made for the first time by embedding Pt clusters (∼1.2 nm) in a high-surface-area Co₃O₄ nanocage to maximize the metal-support interface. The turnover frequency of the Pt/Co₃O₄ catalyst is about nine times higher than that of commercial Pt/C and outperforms almost all other Pt-based catalysts. X-ray absorption spectroscopy, X-ray photoelectron spectroscopy, in situ spectroscopy, and density functional theory calculations suggest that the Co₃O₄ nanocages with rich oxygen vacancies facilitate the adsorption and dissociation of H₂O to give electropositive H (H^δ+), while the in situ embedded Pt clusters can accelerate the formation of electronegative H (H^δ-) from AB. Subsequently, the H^δ+ and H^δ- spill over to the abundant interfacial sites and bond into H₂. In addition to this dual-function synergy effect, the strong metal-support electronic interactions between Co₃O₄ and Pt benefit the desorption of poisonous B-containing byproducts from Pt sites. This effect together with cluster anchoring leads to a fivefold enhancement in durability compared to commercial Pt/C. The metal-support interactions revealed in this study provide more options for catalyst design toward facile H₂ production from chemical hydrogen storage materials.

On the Roles of Electron Transfer in Catalysis by Nanoclusters and Nanoparticles

Electron transfer plays a major role in chemical reactions and processes, and this is particularly true of catalysis by nanomaterials. The advent of metal nanoparticle (NP) catalysts, recently including atomically precise nanoclusters (NCs) as parts of nanocatalyst devices has brought increased control of the relationship between NP and NC structures and their catalytic functions. Consequently, the molecular definition of these new nanocatalysts has allowed a better understanding and management of various kinds of electron transfer involved in the catalytic processes. This Minireview brings a chemist's view of several major aspects of electron-transfer functions concerning NPs and NCs in catalytic processes. Particular focus concerns the role of NPs and NCs as electron reservoirs and light-induced antenna in catalytic processes from H₂ generation to more complex reactions and sustainable energy production.

The Hydrogen-Storage Challenge: Nanoparticles for Metal-Catalyzed Ammonia Borane Dehydrogenation

Dihydrogen is one of the sustainable energy vectors envisioned for the future. However, the rapidly reversible and secure storage of large quantities of hydrogen is still a technological and scientific challenge. In this context, this review proposes a recent state-of-the-art on H₂ production capacities from the dehydrogenation reaction of ammonia borane (and selected related amine-boranes) as a safer solid source of H₂ by hydrolysis (or solvolysis), catalyzed by nanoparticle-based systems. The review groups the results according to the transition metals constituting the catalyst with a mention to their current cost and availability. This includes the noble metals Rh, Pd, Pt, Ru, Ag, as well as cheaper Co, Ni, Cu, and Fe. For each element, the monometallic and polymetallic structures are presented and the performances are described in terms of turnover frequency and recyclability. The structure-property links are highlighted whenever possible. It appears from all these works that the mastery of the preparation of catalysts remains a crucial point both in terms of process, and control and understanding of the electronic structures of the elaborated nanomaterials. A particular effort of the scientific community remains to be made in this multidisciplinary field with major societal stakes.

Tannic Acid: A green and efficient stabilizer of Au, Ag, Cu and Pd nanoparticles for the 4-Nitrophenol Reduction, Suzuki-Miyaura coupling reactions and click reactions in aqueous solution

Due to the good electrical, optical, magnetic, catalytic properties, transition metal nanoparticles (TMNPs) have been becoming more and more interesting in the fileds of environment, material, biomedicine, catalysis, and so on. Here, tannic acid (TA) is used as a green and efficient stabilizer to fabricate all kinds of TMNPs including AuNPs, AgNPs, CuNPs and PdNPs. These TMNPs possess small sizes ranging from 1 nm to 6 nm, which is conducive to several catalytic reactions in aqueous solution, such as 4-nitrophenol (4-NP) reduction, CuAAC reactions and Suzuki-Miyaura coupling reactions. AuNPs and PdNPs are found to have distinctly higher catalytic activities than AgNPs and CuNPs in the 4-NP reduction process. Especially, PdNPs show the highest catalytic activities with TOF up to 7200 h^-1 in the 4-NP reduction. Furthermore, PdNPs also exhibit satisfying catalytic performance in the Suzuki-Miyaura coupling process, and CuNPs are catalytically active in the copper-catalyzed azide alkyne cycloaddition (CuAAC) reactions. The applicability and generality of PdNPs and CuNPs are respectively confirmed via the reaction between different substrates in the Suzuki-Miyaura coupling reactions and the CuAAC reactions. This work present a simple, fast, green and efficient strategy to synthesize TMNPs for multiple catalysis.

High Enhancement in Proton Conductivity by Incorporating Sulfonic Acids into a Zirconium-Based Metal-Organic Framework via "Click" Reaction

Taking a robust zirconium-based metal-organic framework, UiO-66, as a prototype, functional postmodification via the versatile Cu(I)-catalyzed azide-alkyne "click" reaction was carried out, and sulfonic acid groups were successfully grafted into its skeleton. Characterizations revealed that the MOF network was still well maintained after being treated by "clicked" modification. Investigations by electrochemical impedance spectroscopy measurements revealed that its proton conductivity increases exponentially up to 8.8 × 10^-3 S cm^-1 at 80 °C and 98% RH, while those of the UiO-66 and UiO-66-NH₂ are only 6.3 × 10^-6 and 3.5 × 10^-6 S cm^-1, respectively, at the same condition. Additionally, the continuous test shows it possesses long-life reusability. Such a remarkable enhancement on the proton conductivities and high performance in long-life reusability of the resultant MOF demonstrated that the "click" reaction is a facile reaction in postmodification of robust porous materials toward targeted applications, with which highly promising candidates of proton-conductive electrolytes for applying in proton-exchange-membrane (PEM) fuel cell can be achieved.