Copper-Catalyzed Aerobic Oxidations of Organic Molecules: Pathways for Two-Electron Oxidation with a Four-Electron Oxidant and a One-Electron Redox-Active Catalyst

Cu-Catalyzed Tandem Oxidation-Intramolecular Cannizzaro Reaction of Biorenewables and Bioactive Molecules

A tandem Cu-catalyzed oxidation-intramolecular Cannizzaro reaction leading to bioactive α-hydroxyesters from α-hydroxyketones is reported. The process uses oxygen as a sole oxidant to achieve the formation of glyoxals, which are efficiently converted in situ to important α-hydroxyesters. The mechanistic insights are provided by isotopic labeling and supported by DFT calculations. The transformation proved a robust synthetic tool to achieve the synthesis of human metabolites and hydroxyl esters of various biologically active steroid derivatives.

Water and Air Stable Copper(I) Complexes of Tetracationic Catenane Ligands for Oxidative C-C Cross-Coupling

Aqueous soluble and stable Cu(I) molecular catalysts featuring a catenane ligand composed of two dicationic, mutually repelling but mechanically interlocked macrocycles are reported. The ligand interlocking not only fine-tunes the coordination sphere and kinetically stabilizes the Cu(I) against air oxidation and disproportionation, but also buries the hydrophobic portions of the ligands and prevents their dissociation which are necessary for their good water solubility and a sustained activity. These catenane Cu(I) complexes can catalyze the oxidative C-C coupling of indoles and tetrahydroisoquinolines in water, using H2O2 as a green oxidant with a good substrate scope. The successful use of catenane ligands in exploiting aqueous Cu(I) catalysis thus highlights the many unexplored potential of mechanical bond as a design element for exploring transition metal catalysis under challenging conditions.

Light-Induced Reactivity Switch at O2-Activating Bioinspired Copper(I) Complexes

Using light to unveil unexplored reactivities of earth-abundant metal-oxygen intermediates is a formidable challenge, given the already remarkable oxidation ability of these species in the ground state. However, the light-induced reactivity of Cu-O2 intermediates still remains unexplored, due to the photoejection of O2 under irradiation. Herein, we describe a photoinduced reactivity switch of bioinspired O2-activating CuI complexes, based on the archetypal tris(2-pyridyl-methyl)amine (TPA) ligand. This report represents a key precedent for light-induced reactivity switch in Cu-O2 chemistry, obtained by positioning C-H substrates in close proximity of the active site. Open and caged CuI complexes displaying an internal aryl ether substrate were evaluated. Under light, a Cu-O2 mediated reaction takes place that induces a selective conversion of the internal aryl ether unit to a phenolate-CH2- moiety with excellent yields. This light-induced transformation displays high selectivity and allows easy postfunctionalization of TPA-based ligands for straightforward preparation of challenging heteroleptic structures. In the absence of light, O2 activation results in the standard oxidative cleavage of the covalently attached substrate. A reaction mechanism that supports a monomeric cupric-superoxide-dependent reactivity promoted by light is proposed on the basis of reactivity studies combined with (TD-) DFT calculations.

Coordination Variations within Binuclear Copper Dioxygen-Derived (Hydro)Peroxo and Superoxo Species; Influences upon Thermodynamic and Electronic Properties

Copper ion is a versatile and ubiquitous facilitator of redox chemical and biochemical processes. These include the binding of molecular oxygen to copper(I) complexes where it undergoes stepwise reduction-protonation. A detailed understanding of thermodynamic relationships between such reduced/protonated states is key to elucidate the fundamentals of the chemical/biochemical processes involved. The dicopper(I) complex [CuI2(BPMPO-)]1+ {BPMPOH = 2,6-bis{[(bis(2-pyridylmethyl)amino]methyl}-4-methylphenol)} undergoes cryogenic dioxygen addition; further manipulations in 2-methyltetrahydrofuran generate dicopper(II) peroxo [CuII2(BPMPO-)(O22-)]1+, hydroperoxo [CuII2(BPMPO-)(-OOH)]2+, and superoxo [CuII2(BPMPO-)(O2•-)]2+ species, characterized by UV-vis, resonance Raman and electron paramagnetic resonance (EPR) spectroscopies, and cold spray ionization mass spectrometry. An unexpected EPR spectrum for [CuII2(BPMPO-)(O2•-)]2+ is explained by the analysis of its exchange-coupled three-spin frustrated system and DFT calculations. A redox equilibrium, [CuII2(BPMPO-)(O22-)]1+ ⇄ [CuII2(BPMPO-)(O2•-)]2+, is established utilizing Me8Fc+/Cr(η6-C6H6)2, allowing for [CuII2(BPMPO-)(O2•-)]2+/[CuII2(BPMPO-)(O22-)]1+ reduction potential calculation, E°' = -0.44 ± 0.01 V vs Fc+/0, also confirmed by cryoelectrochemical measurements (E°' = -0.40 ± 0.01 V). 2,6-Lutidinium triflate addition to [CuII2(BPMPO-)(O22-)]1+ produces [CuII2(BPMPO-)(-OOH)]2+; using a phosphazene base, an acid-base equilibrium was achieved, pKa = 22.3 ± 0.7 for [CuII2(BPMPO-)(-OOH)]2+. The BDFEOO-H = 80.3 ± 1.2 kcal/mol, as calculated for [CuII2(BPMPO-)(-OOH)]2+; this is further substantiated by H atom abstraction from O-H substrates by [CuII2(BPMPO-)(O2•-)]2+ forming [CuII2(BPMPO-)(-OOH)]2+. In comparison to known analogues, the thermodynamic and spectroscopic properties of [CuII2(BPMPO-)] O2-derived adducts can be accounted for based on chelate ring size variations built into the BPMPO- framework and the resulting enhanced CuII-ion Lewis acidity.

Divergent Bimetallic Mechanisms in Copper(II)-Mediated C-C, N-N, and O-O Oxidative Coupling Reactions

Copper-catalyzed aerobic oxidative coupling of diaryl imines provides a route for conversion of ammonia to hydrazine. The present study uses experimental and density functional theory computational methods to investigate the mechanism of N-N bond formation, and the data support a mechanism involving bimolecular coupling of Cu-coordinated iminyl radicals. Computational analysis is extended to CuII-mediated C-C, N-N, and O-O coupling reactions involved in the formation of cyanogen (NC-CN) from HCN, 1,3-butadiyne from ethyne (i.e., Glaser coupling), hydrazine from ammonia, and hydrogen peroxide from water. The results reveal two different mechanistic pathways. Heteroatom ligands with an uncoordinated lone pair (iminyl, NH2, OH) undergo charge transfer to CuII, generating ligand-centered radicals that undergo facile bimolecular radical-radical coupling. Ligands lacking a lone pair (CN and CCH) form bridged binuclear diamond-core structures that undergo C-C coupling. This mechanistic bifurcation is rationalized by analysis of spin densities in key intermediates and transition states, as well as multiconfigurational calculations. Radical-radical coupling is especially favorable for N-N coupling owing to energetically favorable charge transfer in the intermediate and thermodynamically favorable product formation.

Cu(ii)-catalyzed aerobic oxidative coupling of furans with indoles enables expeditious synthesis of indolyl-furans with blue fluorescence

With the purpose of incorporating sustainability in chemical processes, there has been a renewed focus on utilizing earth-abundant metal catalysts to expand the repertoire of organic reactions and processes. In this work, we have explored the atom-economic oxidative coupling between two important electron-rich heterocycles - indoles and furans - using commonly available, inexpensive metal catalyst CuCl2·2H2O (<0.25$ per g) to develop an expeditious synthesis of indolyl-furans. Moreover, the reaction proceeded well in the presence of the so-called 'ultimate oxidant' - air, without the need for any external ligand or additive. The reaction was found to be scalable and to work even under partially aqueous conditions. This makes the methodology highly economical, practical, operationally simple and sustainable. In addition, the methodology provides direct access to novel indole-furan-thiophene (IFT)-based electron-rich π-conjugated systems, which show green-yellow fluorescence with large Stokes shift and high quantum yields. Mechanistic investigations reveal that the reaction proceeds through chemoselective oxidation of indole by the metal catalyst followed by the nucleophilic attack by furan.

Transition-Metal-Catalyzed 1,2-Diaminations of Olefins: Synthetic Methodologies and Mechanistic Studies

1,2-Diamines are synthetically important motifs in organo-catalysis, natural products, and drug research. Continuous utilization of transition-metal based catalyst in direct 1,2-diamination of olefines, in contrast to metal-free transformations, with numerous impressive advances made in recent years (2015-2023). This review summarized contemporary research on the transition-metal catalyzed/mediated [e. g., Cu(II), Pd(II), Fe(II), Rh(III), Ir(III), and Co(II)] 1,2-diamination (asymmetric and non-asymmetric) especially emphasizing the recent synthetic methodologies and mechanistic understandings. Moreover, up-to-date discussion on (i) paramount role of oxidant and catalyst (ii) key achievements (iii) generality and uniqueness, (iv) synthetic limitations or future challenges, and (v) future opportunities are summarized related to this potential area.

KI-Catalyzed C(sp3)-H Amination and Acyloxylation of Indolin-3-ones Using Air as the Oxidant

We have developed an efficient and green strategy for the synthesis of C2-amino indolin-3-ones and C2-acyloxy indolin-3-ones via KI-catalyzed C(sp3)-H amination and acyloxylation of indolin-3-ones using air as the oxidant. The reaction provides straightforward access to 2-substituted indolin-3-ones by the direct functionalization of indolin-3-ones at the C2 position under mild conditions. Moreover, the conditions enable direct functionalization of a range of complex pharmaceuticals, providing attractive products for medicinal chemistry programs.

A Metal-Organic Complex Constructed from Co(II), Azo-amide-pyridyl and Benzenetricarboxylate Mixed Ligands: Efficient Catalysis for Selective Oxidation of Benzyl Alcohols to Benzyl Acids

By using one-step hydrothermal synthesis, a novel metal-organic complex containing Co(II), the azo-amide-pyridyl ligand (E)-4,4'-(diazene-1,2-diyl)bis(N-(pyridin-3-yl)benzamide (DABA) and benzenetricarboxylate was synthesized, with a molecular formula of [Co2 (DABA)0.5 (MTC)(μ3 -OH)(H2 O)2 ] ⋅ 2H2 O (namely 1, DABA=(E)-4,4'-(diazene-1,2-diyl)bis(N-(pyridin-3-yl)benzamide, H3 MTC=1,2,4-benzenetricarboxylic acid) which was characterized by single crystal X-ray diffraction, PXRD, IR spectroscopy, TGA, and XPS. In the structure of complex 1, tetranuclear Co(II) clusters were connected by MTC to form a 2D bilayer structure and further constructed a 3D structure with DABA ligand. Complex 1 was used as an efficient heterogeneous catalyst for the oxidation of benzyl alcohol, and the conversion rate of benzyl alcohol reached 98.6 % and the selectivity of benzoic acid reached 94.8 %. In addition, complex 1 can be reused 5 times without significant loss of activity. The oxidation of benzyl alcohol with different substituents also showed satisfactory conversion and selectivity, indicating that complex 1 had good catalytic performance.

Recent advances in computational studies on Cu-catalyzed aerobic reactions: cooperation of copper catalysts and dioxygen

O2, one of the ideal oxidants, suffers from low solubility, low oxidizability, low selectivity and a triplet ground state when applied in organic synthesis. Biomimetic copper catalysis has been demonstrated to be a powerful method for activating and transforming O2 to conduct aerobic reactions for a long time. On the other hand, the structures of Cu-O2 complexes are complex with diverse downstream reactions, whereas active copper intermediates were rarely identified by experimental methods, making the mechanisms of many Cu-catalyzed aerobic reactions far from clear. In this context, computational studies emerged as an effective alternative to mechanistic studies on Cu-catalyzed aerobic reactions. This review introduces the relevant computational studies since 2012, focusing on showing the cooperation of copper catalysts and O2 in dehydrogenation, oxygenation and coupling reactions.

Palladium-Catalyzed Direct Selanylation of Chalcogenophenes and Arenes Assisted by 2-(Methylthio)amide

The direct and selective conversion of a C-H bond into a C-Se bond remains a significant challenge, which is even more intricate with substrates having an innate regioselectivity under several reaction conditions, such as chalcogenophenes. We overrode their selectivity toward selanylation using palladium, copper, and the 2-(methylthio)amide directing group. This chelation-assisted direct selanylation was also suitable for mono and double ortho functionalization of arenes. The mechanistic studies indicate high-valent Pd(IV) species in the catalytic cycle, a reversible C-H activation step, and Cu(II) as a sequestering agent for organoselenide byproducts.

Deciphering the effect of amine versus imine ligands of copper(II) complexes in 2-aminophenol oxidation

A series of amine (1-6) and imine (5',6') based copper(II) complexes with tridentate (NNO) ligand donors were synthesized and characterized using modern analytical techniques. All the complexes were subjected to 2-aminophenol (OAP) oxidation to form 2-aminophenoxazin-3-one, as a functional analogue of an enzyme, phenoxazinone synthase. In addition, a critical comparison of the reactivity using the amine-based complexes with their respective imine counterparts was achieved in both experimental as well as theoretical studies. For instance, the kinetic measurement revealed that the imine-based copper(II) complexes (kcat, 2.4 × 105-6.2 × 106 h-1) are better than amine-based (kcat, 6.3 × 104-3.9 × 105 h-1) complexes. The complex-substrate adducts [Cu(L3)(OAP)] (7) and [Cu(L3')(OAP)] (7') were characterized for both systems by mass spectrometry. Further, the DFT study was performed with amine- (3) and imine- (3') based copper(II) complexes, to compare their efficacy in the oxidation of OAP. The mechanistic investigations reveal that the key elementary step to determine the reactivity of 3 and 3' is the proton-coupled electron transfer (PCET) step occurring from the intermediates 7/7'. Further, the computed HOMO-LUMO energy gap of 7' was smaller than 7 by 0.8 eV, which indicates the facile PCET compared to that of 7. Moreover, the coupling of the OAP moiety using imine-complexes (ΔGR.E = -5.8 kcal/mol) was found to be thermodynamically more favorable than amine complexes (ΔGR.E = +3.3 kcal/mol). Overall, the theoretical findings are in good agreement with the experimental results.

Recent Advances in Photochemical Asymmetric Three-Component Reactions

Over the past decades, asymmetric photochemical synthesis has garnered significant attention for its sustainability and unique ability to generate enantio-enriched molecules through distinct reaction pathways. Photochemical asymmetric three-component reactions have demonstrated significant potential for the rapid construction of chiral compounds with molecular diversity and complexity. However, noteworthy challenges persist, including the participation of high-energy intermediates such as radical species, difficulties in precise control of stereoselectivity, and the presence of competing background and side reactions. Recent breakthroughs have led to the development of sophisticated strategies in this field. This review explores the intricate mechanisms, synthetic applications, and limitations of these methods. We anticipate that it will contribute towards advancing asymmetric catalysis, photochemical synthesis, and green chemistry.

Multicopper Clusters Enable Oxidative Phenol Macrocyclization (OxPM) of Peptides

The biosynthesis of glycopeptide antibiotics such as vancomycin and other biologically active biaryl-bridged and diaryl ether-linked macrocyclic peptides includes key enzymatic oxidative phenol macrocyclization(s) of linear precursors. However, a simple and step-economical biomimetic version of this transformation remains underdeveloped. Here, we report highly efficient conditions for preparing biaryl-bridged and diaryl ether-linked macrocyclic peptides based on multicopper(II) clusters. The selective syntheses of ring models of vancomycin and the arylomycin cyclic core illustrate the potential of this technology to facilitate the assembly of complex antibiotic macrocyclic peptides, whose syntheses are considered highly challenging. The unprecedented ability of multicopper(II) clusters to chelate tethered diphenols and promote intramolecular over intermolecular coupling reactions demonstrates that copper clusters can catalyze redox transformations that cannot be accessed by smaller metal catalysts.

Catalytic cascade synthesis of cyanohydrin esters via water/O2-induced cyanide transfer from K3Fe(CN)6

The copper-catalyzed α-oxygenation of aryl benzyl ketones is merged with a unique water/O2-induced release of cyanide ions from K3Fe(CN)6 and a benzil-cyanide reaction. This strategy gives expedient access to cyanohydrin esters starting directly from broadly accessible aryl benzyl ketones. The cyanide release strategy was further integrated with a copper catalyzed oxygenation-decarbonylation sequence to produce cyanohydrin esters from 1,3-diketones.

High-Valent Ni and Cu Complexes of a Tetraanionic Bis(amidateanilido) Ligand

High-valent metal species are often invoked as intermediates during enzymatic and synthetic catalytic cycles. Anionic donors are often required to stabilize such high-valent states by forming strong bonds with the Lewis acidic metal centers while decreasing their oxidation potentials. In this report, we discuss the synthesis of two high-valent metal complexes [ML]+ in which the NiIII and CuIII centers are ligated by a new tetradentate, tetraanionic bis(amidateanilido) ligand. [ML]+, obtained via chemical oxidation of ML, exhibits UV-vis-NIR, EPR, and XANES spectra characteristic of square planar, high-valent MIII species, suggesting the locus of oxidation for both [ML]+ is predominantly metal-based. This is supported by theoretical analyses, which also support the observed visible transitions as ligand-to-metal charge transfer transitions characteristic of square planar, high-valent MIII species. Notably, [ML]+ can also be obtained via O2 oxidation of ML due to its remarkably negative oxidation potentials (CuL/[CuL]+: -1.16 V, NiL/[NiL]+: -1.01 V vs Fc/Fc+ in MeCN). This demonstrates the exceptionally strong donating nature of the tetraanionic bis(amidateanilido) ligation and its ability to stabilize high-valent metal centers..

A Rhombus-Like Tetrameric Vanadoniobate Containing Pseudo-Sandwich-Type {Li ⊂ V2O8(Nb5O14)2} and Its Electrocatalytic Activity for the Selective Oxidation of Benzyl Alcohol

Ongoing research on V-containing polyoxoniobates (PONbs) is driven by their diverse structures and potential applications. Although Lindqvist-type {Nb6O19} is a widely used building block in PONbs, vanadoniobates based on {Nb6O19} and/or its derivatives are still very limited. Herein, a discrete vanadoniobate, LiNa14K11[Li2 ⊂ VIV8Nb32O110]·45H2O (1), has been synthesized by a hydrothermal method, which shows a rhombus-like tetrameric structure composed of two {V2O6(Nb6O19)} and two {Li ⊂ V2O8(Nb5O14)2} subunits derived from {Nb6O19}. Notably, the {Li ⊂ V2O8(Nb5O14)2} subunit has an interesting pseudo-sandwich-type structure, where a {LiV2O8} belt is coordinated by two monolacunary {Nb5O14} molecules and the central site of the cluster is occupied by Li+. Considering that 1 has both basic hexaniobates and redox active V centers, 1 was used as a noble metal-free electrocatalyst for the selective oxidation of benzyl alcohol to benzaldehyde, achieving complete conversion of benzyl alcohol with 94% selectivity for benzaldehyde in 3 h under ambient conditions without using any alkaline additives. Moreover, the catalytic performance of 1 remained largely unchanged after four cycles.

Single-Atom Catalysis in Organic Synthesis

Single-atom catalysts hold the potential to significantly impact the chemical sector, pushing the boundaries of catalysis in new, uncharted directions. These materials, featuring isolated metal species ligated on solid supports, can exist in many coordination environments, all of which have shown important functions in specific transformations. Their emergence has also provided exciting opportunities for mimicking metalloenzymes and bridging the gap between homogeneous and heterogeneous catalysis. This Review outlines the impressive progress made in recent years regarding the use of single-atom catalysts in organic synthesis. We also illustrate potential knowledge gaps in the search for more sustainable, earth-abundant single-atom catalysts for synthetic applications.

Four-Electron Reduction of O2 Using Distibines in the Presence of ortho-Quinones

This study, which aims to identify atypical platforms for the reduction of dioxygen, describes the reaction of O2 with two distibines, namely, 4,5-bis(diphenylstibino)-2,7-di-tert-butyl-9,9-dimethylxanthene and 4,5-bis(diphenylstibino)-2,7-di-tert-butyl-9,9-dimethyldihydroacridine, in the presence of an ortho-quinone such as phenanthraquinone. The reaction proceeds by oxidation of the two antimony atoms to the + V state in concert with reductive cleavage of the O2 molecule. As confirmed by 18O labeling experiments, the two resulting oxo units combine with the ortho-quinone to form an α,α,β,β-tetraolate ligand that bridges the two antimony(V) centers. This process, which has been studied both experimentally and computationally, involves the formation of asymmetric, mixed-valent derivatives featuring a stibine as well as a catecholatostiborane formed by oxidative addition of the quinone to only one of the antimony centers. Under aerobic conditions, the catecholatostiborane moiety reacts with O2 to form a semiquinone/peroxoantimony intermediate, as supported by NMR spectroscopy in the case of the dimethyldihydroacridine derivative. These intermediates swiftly evolve into the symmetrical bis(antimony(V)) α,α,β,β-tetraolate complexes via low barrier processes. Finally, the controlled protonolysis and reduction of the bis(antimony(V)) α,α,β,β-tetraolate complex based on the 9,9-dimethylxanthene platform have been investigated and shown to regenerate the starting distibine and the ortho-quinone. More importantly, these last reactions also produce two equivalents of water as the product of O2 reduction.

A Phosphine Oxide-Functionalized Cyclam as a Specific Copper(II) Chelator

Although cyclam-based ligands are among the strongest copper(II) chelators available, they also usually present good affinity for other divalent cations [Zn(II), Ni(II), and Co(II)], with no copper(II)-specific cyclam ligands having been described so far. As such a property is highly desirable in a wide range of applications, we present herein two novel phosphine oxide-appended cyclam ligands that could be efficiently synthesized through Kabachnik-Fields type reactions on protected cyclam precursors. Their copper(II) coordination properties were closely studied by different physicochemical techniques [electron paramagnetic resonance (EPR) and ultraviolet-visible (UV-vis) spectroscopies, X-ray diffraction, and potentiometry]. The mono(diphenylphosphine oxide)-functionalized ligand demonstrated a copper(II)-specific behavior, unprecedented within the cyclam family of ligands. This was evidenced by UV-vis complexation and competition studies with the parent divalent cations. Density functional theory calculations also confirmed that the particular ligand geometry in the complexes strongly favors copper(II) coordination over that of competing divalent cations, rationalizing the specificity observed experimentally.

Copper-Catalyzed Synthesis of 3-Aryl-9H-imidazo[1,5-a]indol-9-ones Using Oxygen as the Sole Oxidant

A three-component strategy was developed for 3-phenyl-9H-imidazo[1,5-a]indol-9-one preparation from indole-2-carboxaldehydes, aromatic aldehydes, and ammonium acetate under copper catalysis conditions. In this process, a new five-membered ring was formed and the C3 position in the indole substrate was selectively oxidized into a ketone skeleton using oxygen as the sole oxidant and ammonium acetate as the nitrogen source. Furthermore, same products also could be achieved from indole-2-carboxaldehydes and benzyl amines under similar reaction conditions.

Redox Mediators in Homogeneous Co-electrocatalysis

Homogeneous electrocatalysis has been well studied over the past several decades for the conversion of small molecules to useful products for green energy applications or as chemical feedstocks. However, in order for these catalyst systems to be used in industrial applications, their activity and stability must be improved. In naturally occurring enzymes, redox equivalents (electrons, often in a concerted manner with protons) are delivered to enzyme active sites by small molecules known as redox mediators (RMs). Inspired by this, co-electrocatalytic systems with homogeneous catalysts and RMs have been developed for the conversion of alcohols, nitrogen, unsaturated organic substrates, oxygen, and carbon dioxide. In these systems, the RMs have been shown to both increase the activity of the catalyst and shift selectivity to more desired products by altering catalytic cycles and/or avoiding high-energy intermediates. However, the area is currently underdeveloped and requires additional fundamental advancements in order to become a more general strategy. Here, we summarize the recent examples of homogeneous co-electrocatalysis and discuss possible future directions for the field.

Regioselective protein oxidative cleavage enabled by enzyme-like recognition of an inorganic metal oxo cluster ligand

Oxidative modifications of proteins are key to many applications in biotechnology. Metal-catalyzed oxidation reactions efficiently oxidize proteins but with low selectivity, and are highly dependent on the protein surface residues to direct the reaction. Herein, we demonstrate that discrete inorganic ligands such as polyoxometalates enable an efficient and selective protein oxidative cleavage. In the presence of ascorbate (1 mM), the Cu-substituted polyoxometalate K₈[Cu²⁺(H₂O)(α₂-P₂W₁₇O₆₁)], (Cu^IIWD, 0.05 mM) selectively cleave hen egg white lysozyme under physiological conditions (pH =7.5, 37 °C) producing only four bands in the gel electropherogram (12.7, 11, 10, and 5 kDa). Liquid chromatography/mass spectrometry analysis reveals a regioselective cleavage in the vicinity of crystallographic Cu^IIWD/lysozyme interaction sites. Mechanistically, polyoxometalate is critical to position the Cu at the protein surface and limit the generation of oxidative species to the proximity of binding sites. Ultimately, this study outlines the potential of discrete, designable metal oxo clusters as catalysts for the selective modification of proteins through radical mechanisms under non-denaturing conditions.

Electrochemical organic reactions: A tutorial review

Although the core of electrochemistry involves simple oxidation and reduction reactions, it can be complicated in real electrochemical organic reactions. The principles used in electrochemical reactions have been derived using physical organic chemistry, which drives other organic/inorganic reactions. This review mainly comprises two themes: the first discusses the factors that help optimize an electrochemical reaction, including electrodes, supporting electrolytes, and electrochemical cell design, and the second outlines studies conducted in the field over a period of 10 years. Electrochemical reactions can be used as a versatile tool for synthetically important reactions by modifying the constant electrolysis current.

Progress in copper-catalysed/mediated intramolecular dehydrogenative coupling

Transition metal-catalysed C-H functionalization reactions are one of the most efficient synthetic methodologies to construct carbon-carbon and carbon-heteroatom bonds. The initial developments in the field were largely dominated by expensive transition metal catalysts. However, in the past decade, the focus of the catalyst shifted to first-row transition metals and copper catalysis contributed significantly. Abundant, cost-effective, and less toxic copper catalysts are an ideal green alternative to palladium and similar metals. The intramolecular dehydrogenative coupling itself developed as a prominent area of focus as the strategy straightaway affords complex polycyclic scaffolds in one pot. Regioselective activation of inert C-H bonds were made possible with copper catalysts and interestingly, oxygen served as the terminal oxidant in most of the cases. In the present review the focus is on the intramolecular dehydrogenative coupling reactions between carbon-hydrogen and heteroatom-hydrogen bonds to afford carbon-carbon and carbon-hetero atom bonds, catalysed/mediated by copper salts. Though the intermolecular dehydrogenative coupling reactions of copper have already been reviewed more than once, to the best of our knowledge this is the first comprehensive account of copper-based intramolecular dehydrogenative coupling.

Flavonol dioxygenase chemistry mediated by a synthetic nickel superoxide

Nature exploits transition metal centers to enhance and tune the oxidizing power of natural oxidants such as O₂ and H₂O₂. The design and interrogation of synthetic metallocomplexes with similar reactivity to metalloproteins provides one strategy for gaining insight into the mechanistic underpinnings of oxygen-activating enzymes such as oxidases, oxygenases, and dioxygenases like Ni-quercetinase (Ni-QueD). Ni-QueD catalyzes the oxidative ring opening of the polyphenol quercetin, a natural product with antioxidant properties. Herein, we report the synthesis and characterization of Ni(13-DOB), a Ni(II) species complexed by an N4-macrocycle that has been characterized by single crystal X-ray crystallography. Ni(13-DOB) forms a Ni-superoxide intermediate (Ni(13-DOB)O₂^•-) upon treatment with H₂O₂ and Et₃N, as verified by resonance Raman spectroscopy. We demonstrate through UV/vis and LCMS that Ni(13-DOB)O₂^•- is capable of the 1-electron oxidation of flavonols, including both 3-hydroxyflavone (3-HF, the simplest flavonol) and quercetin itself. Incorporation of two O-atoms into the flavonol radical via superoxide from Ni(13-DOB)O₂^•- precedes oxidative cleavage of the flavonol scaffold in each case, consistent with quercetinase ring cleavage by Ni-QueD in Streptomyces sp. FLA. Conversion of 3-HF into 2-hydroxybenzoylbenzoic acid was accomplished with catalytic turnover of Ni(13-DOB) at ambient temperature, as confirmed by HPLC timecourses and GCMS analysis of isotopic labeling studies. The Ni(13-DOB)-mediated oxidative cleavage of quercetin to the corresponding biomimetic phenolic ester was also verified through ¹⁸O-isotopic labeling studies. Through the HPLC characterization of both on- and off-pathway products of flavonol dioxygenation by Ni(13-DOB)O₂^•-, the stringent reaction pathway control provided by enzyme active sites is highlighted.

Computational Insights of Selective Intramolecular O-atom Transfer Mediated by Bioinspired Copper Complexes

The stereoselective copper-mediated hydroxylation of intramolecular C-H bonds from tridentate ligands is reinvestigated using DFT calculations. The computational study aims at deciphering the mechanism of C-H hydroxylation obtained after reaction of Cu(I) precursors with dioxygen, using ligands bearing either activated (L¹ ) or non-activated (L² ) C-H bonds. Configurational analysis allows rationalization of the experimentally observed regio- and stereoselectivity. The computed mechanism involves the formation of a side-on peroxide species (P) in equilibrium with the key intermediate bis-(μ-oxo) isomer (O) responsible for the C-H activation step. The P/O equilibrium yields the same activation barrier for the two complexes. However, the main difference between the two model complexes is observed during the C-H activation step, where the complex bearing the non-activated C-H bonds yields a higher energy barrier, accounting for the experimental lack of reactivity of this complex under those conditions.

Association thermodynamic parameters for nano Cu(NO3)2·2.5H2O with ligands at different temperatures

Association thermodynamic parameters are important because they give information about the nature of ion-ion interaction in solution, the dielectric constant of the medium and the intermolecular hydrogen bonding between the solvent molecules. The different association thermodynamic parameters for nano copper(ii) nitrate hemi pentahydrate in the presence of 4,6-diacetylresorcinol and 4,6-bis(1-hydrazonoethyl)benzene-1,3-diol as ligands were calculated. Conductance measurements were used in different concentrations of binary mixed solvents (DMF and water) at different temperatures, 293.15, 303.15, 313.15 and 323.15 K. A comparison between association thermodynamic parameter data such as association constants (K _A), degree of dissociation (α), free energies of association (ΔG _A), enthalpies of association (ΔH _A) and entropies of association (ΔS _A) in the case of using the two ligands was done. Different calculated thermodynamic parameters indicate that the association is more favorable with 4,6-diacetylresorcinol as a ligand than 4,6-bis(1-hydrazonoethyl)benzene-1,3-diol due to the large size of 6-bis(1-hydrazonoethyl)benzene-1,3-diol.

Unraveling the Chemistry of High Valent Arylcopper Compounds and Their Roles in Copper-Catalyzed Arene C-H Bond Transformations Using Synthetic Macrocycles

Recent decades have witnessed a resurgence of the study of copper-catalyzed organic reactions. As the surrogate of noble metal catalysts, copper salts have been shown to exhibit remarkable versatility in activating various C-H bonds enabling the construction of diverse carbon-carbon and carbon-heteroatom bonds. Advantageously, copper salts are also naturally abundant, inexpensive, and less toxic in comparison to precious metals. Despite significant developments in synthesis, the mechanism of copper catalysis remains elusive. Hypothetical pathways such as the two-electron Cu(III)/Cu(I) and Cu(II)/Cu(0) catalytic cycles and the one-electron Cu(II)/Cu(I) catalytic cycle have been invoked to diagram C-H bond transformations because of the formidable challenges to isolate and characterize transient high valent organocopper intermediates. In fact, organocopper chemistry has been dominated for a long time by the acknowledged nucleophilic organocopper(I) compounds. Since the beginning of the new millennium, we have been systematically studying the supramolecular chemistry of heteracalix[n]aromatics. Owing to the ease of their synthesis and selective functionalizations, self-tunable conformation and cavity structures resulting from the interplay of heteroatoms with aromatic subunits, and outstanding properties in molecular recognition and self-assembly, heteracalix[n]aromatics have become a class of privileged synthetic macrocyclic hosts. Our journey to the chemistry of high valent organocopper compounds started with a serendipitous discovery of the facile formation of a stable organocopper compound, which contains astonishingly a Ph-Cu(III) σ-bond under very mild aerobic conditions. When we examined routinely the effect of the macrocyclic structures on noncovalent complexation properties, titration of tetraazacalix[1]arene[3]pyridine with Cu(ClO₄)₂·6H₂O resulted in the precipitation of dark-purple crystals of phenylcopper(III) diperchlorate. Our curiosity about the transformation of an arene C-H bond into an Ar-Cu(III) bond prompted us to conduct an in-depth investigation of the reaction of macrocyclic arenes with copper(II) salts, leading to the isolation of arylcopper(II) compounds which are unprecedented and the missing link in organocopper chemistry. With structurally well-defined organometallics in hand, we have explored extensively the reactivities of both arylcopper(II) and arylcopper(III) compounds, demonstrating their versatility and uniqueness in chemical synthesis. Novel and fascinating arene C-H transformations under copper catalysis have been developed. Using acquired high valent arylcopper compounds as molecular probes, and employing the functionalizations of tetraazacalix[1]arene[3]pyridines as model reactions, we have revealed the diverse mechanisms of copper-promoted arene C-H bond reactions. Elusive reaction pathways of some copper-catalyzed C-X bond activations have also been unraveled. In the meantime, we have also witnessed pleasingly the rapid development of field with the advent of new high valent organocopper compounds. Without any doubt, studies of the synthesis, reactivity, and catalysis of high valent organocopper compounds have been reshaping the field of organocopper chemistry. This Account summarizes our endeavors to explore the chemistry of structurally well-defined arylcopper(II) and arylcopper(III) compounds and the mechanisms of copper-catalyzed arene C-H and C-X bond transformations. We hope this Account will inspire chemists to study thoroughly the fundamentals and the cutting-edge catalysis of high valent organocopper compounds advancing and redefining the discipline of organocopper chemistry.

Ligand Development for Copper-Catalyzed Enantioconvergent Radical Cross-Coupling of Racemic Alkyl Halides

The enantioconvergent cross-coupling of racemic alkyl halides represents a powerful tool for the synthesis of enantioenriched molecules. In this regard, the first-row transition metal catalysis provides a suitable mechanism for stereoconvergence by converting racemic alkyl halides to prochiral radical intermediates owing to their good single-electron transfer ability. In contrast to the noble development of chiral nickel catalyst, copper-catalyzed enantioconvergent radical cross-coupling of alkyl halides is less studied. Besides the enantiocontrol issue, the major challenge arises from the weak reducing capability of copper that slows the reaction initiation. Recently, significant efforts have been dedicated to basic research aimed at developing chiral ligands for copper-catalyzed enantioconvergent radical cross-coupling of racemic alkyl halides. This perspective will discuss the advances in this burgeoning area with particular emphasis on the strategic chiral anionic ligand design to tune the reducing capability of copper for the reaction initiation under thermal conditions from our research group.

Scalable Electrochemical Aerobic Oxygenation of Indoles to Isatins without Electron Transfer Mediators by Merging with an Oxygen Reduction Reaction

An approach to electrochemical oxygenation of indoles leading to isatins was developed by merging with a complementary cathode oxygen reduction reaction. The features of this green protocol include the use of molecular oxygen as the sole oxidant, it being free of an electron transfer mediator, and gram-scale preparation. Mechanistic studies suggested a radical process, and the two oxygen atoms in the isatins were both most likely from molecular oxygen. A detailed mechanism of the reaction utilizing density functional theory calculations was elucidated.

Minimalist De Novo Design of an Artificial Enzyme

We employed a reductionist approach in designing the first heterochiral tripeptide that forms a robust heterogeneous short peptide catalyst similar to the "histidine brace" active site of lytic polysaccharide monooxygenases. The histidine brace is a conserved divalent copper ion-binding motif that comprises two histidine side chains and an amino group to create the T-shaped 3N geometry at the reaction center. The geometry parameters, including a large twist angle (73°) between the two imidazole rings of the model complex, are identical to those of native lytic polysaccharide monooxygenases (72.61°). The complex was synthesized and characterized as a structural and functional mimic of the histidine brace. UV-vis, vis-circular dichroism, Raman, and electron paramagnetic resonance spectroscopic analyses suggest a distorted square-pyramidal geometry with a 3N coordination at pH 7. Solution- and solid-state NMR results further confirm the 3N coordination in the copper center of the complex. The complex is pH-dependent and could catalyze the oxidation of benzyl alcohol in water to benzaldehyde with yields up to 82% in 3 h at pH 7 and above at 40 °C. The catalyst achieved 100% selectivity for benzaldehyde compared to conventional copper catalysis. The design of such a minimalist building block for functional soft materials with a pH switch can be a stepping stone in addressing needs for a cleaner and sustainable future catalyst.

Oxidase‐Type C−H/C−H Coupling Using an Isoquinoline‐Derived Organic Photocatalyst

Oxidase‐type oxidation is an attractive strategy in organic synthesis due to the use of O₂ as the terminal oxidant. Organic photocatalysis can effect metal‐free oxidase chemistry. Nevertheless, current methods are limited in reaction scope, possibly due to the lack of suitable photocatalysts. Here we report an isoquinoline‐derived diaryl ketone‐type photocatalyst, which has much enhanced absorption of blue and visible light compared to conventional diaryl ketones. This photocatalyst enables dehydrogenative cross‐coupling of heteroarenes with unactivated and activated alkanes as well as aldehydes using air as the oxidant. A wide range of heterocycles with various functional groups are suitable substrates. Transient absorption and excited‐state quenching experiments point to an unconventional mechanism that involves an excited state “self‐quenching” process to generate the N‐radical cation form of the sensitizer, which subsequently abstracts a hydrogen atom from the alkane substrate to yield a reactive alkyl radical.

Cu-catalyzed, Mn-mediated propargylation and allenylation of aldehydes with propargyl bromides

A simple, practical, and high chemo-selective method for the synthesis of propargyl alcohol and allenyl alcohols via Cu-catalyzed, Mn-mediated propargylation and allenylation of aldehydes with propargyl bromides has been established. When 3-bromo-1-propyne was conducted under the standard condition, the aldehydes were transformed to the corresponding propargylation products completely, while when 1-bromo-2-pentyne was used, allenic alcohol was the only product. Variety of homopropargyl alcohols and allenyl alcohols were obtained in high yields and the reaction is compatible with broad substrate scopes. In addition, the large-scale reaction could also be proceeded smoothly indicating the potential synthetic applications of this transformation.

Copper-catalyzed aerobic benzylic C(sp3)-H lactonization of 2-alkylbenzamides via N-centered radicals

Herein, we describe the copper-catalyzed aerobic C(sp³)-H functionalization of 2-alkylbenzamides for the synthesis of benzolactones. This reaction proceeds via 1,5-hydrogen atom transfer of N-centered radicals directly generated by N-H bond cleavage and does not require the synthesis of pre-functionalized N-centered radical precursors or the use of strong stoichiometric oxidants.

Dehydrogenative ester synthesis from enol ethers and water with a ruthenium complex catalyzing two reactions in synergy

We report the dehydrogenative synthesis of esters from enol ethers using water as the formal oxidant, catalyzed by a newly developed ruthenium acridine-based PNP(Ph)-type complex. Mechanistic experiments and density functional theory (DFT) studies suggest that an inner-sphere stepwise coupled reaction pathway is operational instead of a more intuitive outer-sphere tandem hydration-dehydrogenation pathway.

Accessing Grignard Reluctant Aldehyde in 2-Oxoaldehyde by Organocuprates to Give [1,2] Addition and Oxidative Coupling Reactions

Novel finding of aldehyde in 2-oxoaldehyde (2OA) is presented as it unprecedentedly disinclines to react with Grignard reagents but reacts with moderate organocuprate reagents in anaerobic condition to give [1,2] addition (α-hydroxyketones) reaction. In the presence of air, the reaction produces an efficient protocol for the synthesis of 1,2-diones through a copper-catalyzed oxidative cross-coupling reaction at room temperature. Mechanistic studies indicate that α-hydroxy ketone perhaps is generated before the hydrolysis step/acid work-up process. The α-keto group of 2OA causes to exhibit this peculiar aldehyde behavior toward these organometallic reagents.