Resonance Energy Transfer in Upconversion Nanoplatforms for Selective Biodetection

NIR-excited imaging of drug-induced liver injury using a superoxide-activated ratiometric upconversion luminescence nanoprobe

Drug-induced liver injury (DILI) poses a significant risk to human health. Increasing evidence indicates that the superoxide anion (O2•-), as the precursor of the other reactive oxygen species, is key in the pathological processes associated with DILI. Nonetheless, understanding of the mechanisms of DILI is difficult due to the lack of an imaging tool for monitoring the fluctuation of O2•- levels during the progression of DILI. Herein, we developed an upconversion nanoprobe (Rbh-UCNs) for in vivo ratiometric tracking of endogenous O2•- in DILI. In this design, the addition of O2•- triggers the luminescent resonance energy transfer between Rbh and UCNs, which significantly enhances absorption centered at 534 nm and translates into a distinct decrease of the UCL emission at 543 nm, while the UCL emission peak at 654 nm and 800 nm are not significantly affected, offering a ratiometric UCL signal for the quantitative detection of O2•-. In addition, Rbh-UCNs could effectively visualize endogenous O2•- in living cells, zebrafish, and liver tissues upon stimulation with PMA or cisplatin. More importantly, tissue imaging of the liver region of mice revealed that the fluctuation of O2•- levels is associated with DILI and the protective effect of L-carnitine against DILI. Altogether, this study provides an available method for a deeper comprehension of the mechanisms underlying DILI and accelerating the development process of hepatoprotective medicines.

Tailoring upconversion fluorescence of lanthanide doped nanocrystals by coupling to single microcavity mode with specific symmetry

Lanthanide-doped upconversion nanoparticles have unique optical properties that can absorb low-energy infrared photons and then emit higher-energy visible ones, which have been widely used for advanced optical sensors and fluorescent probes. Efficiently tailoring the upconversion emission is desirable for meeting the wavelength requirement in various application fields. However, up to now, optimizing the composition combining with core/shell structure is still the predominant way to reach this goal. Here, we show that the relative intensities of the emission peaks of upconverting nanoparticles can be tuned by coupling to single microcavity mode with specific symmetry. Theoretical calculation based on the finite-difference time-domain (FDTD) indicates that the symmetries of the microcavity modes dominate their resonant absorption properties in the visible region. As a result, the upconversion emission peaks vary in these microcavities with different symmetries. This route can be developed for tailoring the emission spectra of other luminescent materials, such as quantum dots and fluorescent dyes.

Synergistic synthesis of gold nanoflowers as upconversion near-infrared nanoprobe energy acceptor and recognition unit for improved hydrogen sulfide sensing

A highly sensitive and selective upconversion near-infrared (NIR) fluorescence and colorimetric dual readout hydrogen sulfide (H2S) nanoprobe was constructed based on the excellent NIR fluorescence emission performance of upconversion nanomaterials (UCNPs), the specific recognition effect of synergistically synthesized gold nanoflowers (trypsin-stabled AuNFs (Try-AuNFs)) and the effective NIR fluorescence quenching capability. In this assay, the sensing strategy included three processes. First of all, the synthesized UCNPs can emit 803 nm NIR fluorescence when they were excited by 980 nm excitation light. Secondly, as a result of the principle of fluorescence resonance energy transfer (FRET), Try-AuNFs can effectively quench the NIR fluorescence of UCNPs at 803 nm, which can effectively improve the signal-to-background ratio of nanoprobes, thereby improving the sensitivity of the probes. Thirdly, in the presence of H2S, the Try protective layer on the surface of Try-AuNFs was specifically penetrated, which will subsequently cleave Try-AuNFs via the strong S-Au bond. As such, the NIR fluorescence of UCNPs will be restored, achieving high selectivity and sensitivity detection of H2S. Under optimized conditions, the linear response range of H2S was 0.1-300 μM, and the detection limit was 53 nM. It is worth noting that the Try on the surface of Try-AuNFs via the synergistic effect can increase the steric hindrance of the probe, and this can effectively prevent the interaction between the probe with biothiols (cysteine (Cys), homocysteine (Hcy)) and other natural amino acids (non-thiol-containing) with resultant in the high selectivity regarding the detection of H2S in human serum, which is unlikely to be achieved by AuNFs synthesized by the gold seed method (Se-AuNFs). This work not only provided a new type of UCNPs fluorescence quencher and recognition unit, but also exemplified that the use of the physical properties (steric hindrance) of protein ligands on the surface of nanoflowers can improve the specificity of the probe. This will provide new ideas for the design of other nanoprobes.

Single-particle Förster resonance energy transfer from upconversion nanoparticles to organic dyes

Single-particle detection and sensing, powered by Förster resonance energy transfer (FRET), offers precise monitoring of molecular interactions and environmental stimuli at a nanometric resolution. Despite its potential, the widespread use of FRET has been curtailed by the rapid photobleaching of traditional fluorophores. This study presents a robust single-particle FRET platform utilizing upconversion nanoparticles (UCNPs), which stand out for their remarkable photostability, making them superior to conventional organic donors for energy transfer-based assays. Our comprehensive research demonstrates the influence of UCNPs' size, architecture, and dye selection on the efficiency of FRET. We discovered that small particles (∼14 nm) with a Yb3+-enriched outermost shell exhibit a significant boost in FRET efficiency, a benefit not observed in larger particles (∼25 nm). 25 nm UCNPs with an inert NaLuF4 shell demonstrated a comparable level of emission enhancement via FRET as those with a Yb3+-enriched outermost shell. At the single-particle level, these FRET-enhanced UCNPs manifested an upconversion green emission intensity that was 8.3 times greater than that of their unmodified counterparts, while maintaining notable luminescence stability. Our upconversion FRET system opens up new possibilities for developing more effective high-brightness, high-sensitivity single-particle detection, and sensing modalities.

Near-Infrared Catalytic Chemiluminescence System based on Zinc Gallate Nanoprobe for Hydrazine Sensing

To the deep tissue penetration and ultra-low background, developing near-infrared (NIR) chemiluminescence probes for human health and environmental safety has attracted more and more attention, but it remains a huge challenge. Herein, a novel NIR chemiluminescence (CL) system was rationally designed and developed, utilizing Cr3+-activated ZnGa2O4 (ZGC) nanoparticles as a catalytic luminophore via hypochlorite (NaClO) activation for poisonous target (hydrazine, N2H4) detection. With superior optical performance and unique catalytic structure of ZGC nanoparticles, the fabricated ZGC-NaClO-N2H4 CL system successfully demonstrated excellent NIR emission centered at 700 nm, fast response, and high sensibility (limit of detection down to 0.0126 μM). Further experimental studies and theoretical calculations found the cooperative catalytic chemiluminescence resonance energy transfer mechanism in the ZGC-NaClO-N2H4 system. Remarkably, the ZGC-based NIR CL system was further employed for N2H4 detection in a complicated matrix involving bioimaging and real water samples, thereby opening a new way as a highly reliable and accurate tool in biomedical and environmental monitoring applications.

Electric-field modulated energy transfer in phosphorescent material- and fluorescent material-codoped polymer light-emitting diodes

The excited-state energy transfer widely exists in mixed-material systems and devices. The modulation of an electric field on the energy transfer in photoluminescence has been demonstrated. However, to date, no studies on the electric-field modulation of the excited-state energy transfer in organic optoelectronic devices have been reported. Herein, we investigate the effect of an electric field on the energy transfer in the poly(N-vinylcarbazole) (PVK) thin films doped with iridium(iii)[bis(4,6-difluorophenyl)pyridinato-N,C2']-tetrakis(1-pyrazolyl)borate (Fir6) and 5,6,11,12-tetraphenylnaphthacene (rubrene) (PVK:Fir6:rubrene) and the corresponding light-emitting diodes. Combined with the Onsager model describing electric-field enhanced exciton dissociation, we find that the electric field increases the rate of Dexter energy transfer from Fir6 to rubrene in the films and the diodes. The voltage-dependent color shift in the PVK:Fir6:rubrene light-emitting diodes can be explained by the electric-field enhanced Dexter energy transfer from Fir6 to rubrene. Our findings are important for the control of energy transfer process in organic optoelectronic devices by an electric field for desirable applications.

Tumor-associated antigen-specific cell imaging based on upconversion luminescence and nucleic acid rolling circle amplification

Tumor-associated antigen (TAA)-based diagnosis has gained prominence for early tumor screening, treatment monitoring, prognostic assessment, and minimal residual disease detection. However, limitations such as low sensitivity and difficulty in extracting non-specific binding membrane proteins still exist in traditional detection methods. Upconversion luminescence (UCL) exhibits unique physical and chemical properties under wavelength near-infrared light excitation. Rolling circle amplification (RCA) is an efficient DNA amplification technique with amplification factors as high as 105. Therefore, the above two excellent techniques can be employed for highly accurate imaging analysis of tumor cells. Herein, we developed a novel nanoplatform for TAA-specific cell imaging based on UCL and RCA technology. An aptamer-primer complex selectively binds to Mucin 1 (MUC1), one of TAA on cell surface, to trigger RCA reaction, generating a large number of repetitive sequences. These sequences provide lots of binding sites for complementary signal probes, producing UCL from lanthanide-doped upconversion nanoparticles (UCNPs) after releasing quencher group. The experimental results demonstrate the specific attachment of upconversion nanomaterials to cancer cells which express a high level of MUC1, indicating the potential of UCNPs and RCA in tumor imaging.

Three robust Cd(II) coordination polymers as bifunctional luminescent probes for efficient detection of pefloxacin and Cr2O72- in water

The accurate and rapid detection of antibiotics and heavy-metal-based toxic oxo-anions in water media employing coordination polymers (CPs) as luminescent probes has attracted a lot of attention. Three new Cd(II)-based ternary CPs derived from first-presented L ligands, including [Cd(DCTP)(L)(OH)]n (1), [Cd(TBTA)(L)(OH)]n (2), and [Cd(NPHT)(L)(H2O)]n (3) (L = 2-((1H-imidazol-1-yl)methyl)-5,6-dimethyl-1H-benzo[d]imidazole, H2DCTP = 2,5-dichloroterephthalic acid, H2TBTA = tetrabromoterephthalic acid and H2NPHT = 3-nitrophthalic acid), were successfully assembled and characterized. 1 and 2 show 2D hcb layers, which can be further extended into a 3D supramolecular framework via classic hydrogen bonding interactions. 3 features a 1D double chain that ultimately spreads into a 2D network through weak hydrogen bonding interactions. With the advantages of high stability and excellent luminescent properties, the three CPs display high sensitivity, selectivity, and good anti-interference for the sensing of pefloxacin (PEF) and Cr2O72- ions (LOD values toward PEF: 3.82 × 10-7 mol L-1 for 1, 4.06 × 10-7 mol L-1 for 2, and 1.36 × 10-8 mol L-1 for 3, and toward Cr2O72- ions: 5.97 × 10-7 mol L-1 for 1, 5.87 × 10-7 mol L-1 for 2, and 8.21 × 10-8 mol L-1 for 3). These CPs are the first examples of bifunctional luminescent sensors to detect PEF and Cr2O72- in aqueous solutions. The luminescence quenching mechanisms are explored in detail.

Upconversion-Powered Photoelectrochemical Bioanalysis for DNA Sensing

In this work, we report a new concept of upconversion-powered photoelectrochemical (PEC) bioanalysis. The proof-of-concept involves a PEC bionanosystem comprising a NaYF4:Yb,Tm@NaYF4 upconversion nanoparticles (UCNPs) reporter, which is confined by DNA hybridization on a CdS quantum dots (QDs)/indium tin oxide (ITO) photoelectrode. The CdS QD-modified ITO electrode was powered by upconversion absorption together with energy transfer effect through UCNPs for a stable photocurrent generation. By measuring the photocurrent change, the target DNA could be detected in a specific and sensitive way with a wide linear range from 10 pM to 1 μM and a low detection limit of 0.1 pM. This work exploited the use of UCNPs as signal reporters and realized upconversion-powered PEC bioanalysis. Given the diversity of UCNPs, we believe it will offer a new perspective for the development of advanced upconversion-powered PEC bioanalysis.

NaYF4:Yb/Ho upconversion nanoprobe incorporated gold nanoparticle (AuNP) based FRET immunosensor for the "turn-on" detection of cardiac troponin I

Cardiac troponin I (cTnI) is a significant biomarker for acute heart attack. Hence, fast, economical, easy and real time monitoring of cardiac troponin I (cTnI) is of great importance in diagnosis and prognosis of heart failure in the healthcare domain. In this work, an immunoassay based on NaYF4:Yb/Ho based photon-upconversion nanoparticle (UCNP) with narrow emission peaks at 540 nm and 655 nm respectively, is synthesized. Then, it is encapsulated with amino functionalized silica using 3-aminopropyltriethoxysilane (APTES) to form APTES@SiO2-NaYF4:Yb/Ho UCNPs. When AuNPs is added to this system, the fluorescence is quenched by the electrostatic interaction with APTES@SiO2-NaYF4:Yb/Ho UCNPs, thereby exhibiting a FRET-based biosensor. When the cTnI antigen is introduced into the developed probe, an antibody-antigen complex is formed on the surface of the UCNPs resulting in fluorescence recovery. The developed sensor shows a linear response towards cTnI in the range from 0.1693 ng mL-1 to 1.9 ng mL-1 with a low limit of detection (LOD) of 5.5 × 10-2 ng mL-1. The probe exhibits adequate selectivity and sensitivity when compared with coexisting cardiac biomarkers, biomolecules and in real human serum samples.

A Two-Step Fluorescence-Resonance Energy Transfer System Constructed by Platinum(II) Metallacycle Based Molecular Recognition

Considerable progress in the construction of efficient fluorescence-resonance energy transfer (FRET) systems has promoted the development of artificial energy transfer materials. However, despite recent advances, the exploration of efficient and easy strategies to fabricate novel supramolecular systems with FRET activities is still a challenge. Here, we report that a two-step FRET system was successfully achieved, driven by platinum metallacycle based host-guest interactions. The two-step FRET system is used for the preparation of a white-light-emitting diode and serves as a nanoreactor for the photosynthetic process. This work offers a strategy for the fabrication of FRET systems and opens opportunities for functional materials constructed by platinum(II) metallacycle based host-guest interactions.

Attomolar-level detection of respiratory virus long-chain oligonucleotides based on FRET biosensor with upconversion nanoparticles and Au-Au dimer

Upconversion nanoparticles (UCNPs) are promising nanoprobes in DNA/RNA detection, such as respiratory viral RNAs, and siRNA in cancer. However, recent studies have indicated that the sensitivity of UCNP-based biosensors is restricted, ranging from picomolar to femtomolar level. Moreover, most of existing UCNP-based probes are only able to detect short-chain oligonucleotides, which are not suitable for detection of long-chain oligonucleotides in many real applications. In this work, we introduced a new UCNP-based fluorescence resonance energy transfer (FRET) nanoprobe design composed of NaGdF4:Yb3+, Er3+@NaGdF4 core-shell UCNPs (csUCNPs) linking with Au-Au dimer to detect long-chain oligonucleotides of SARS-CoV-2 N-gene. Compared with typical single gold nanoparticles (AuNPs) in FRET biosensors, our theoretical investigation shows that a stronger electromagnetic field is generated in the Au-Au dimer where the plasmon resonance can enhance FRET efficiency and increase the working distance. Thus, the synergetic effect of plasmonic resonance and FRET enables a greater quenching efficiency (QE) of Au-Au dimer to UCNPs, which leads to more remarkable upconversion luminescence (UCL) recovery for each target gene recognition. Importantly, our design significantly improved the limit of detection (LOD) to attomolar level, with a linear response ranging from 2 aM to 2 fM. Moreover, the clinical detection with inactivated SARS-CoV-2 samples was successfully performed with excellent specificity within 30 min using the developed UCNPs biosensors incorporated with Au-Au dimer. This UCNP biosensor based on Au-Au dimer strategy with ultra-sensitivity and good selectivity opens a new path for clinical diagnosis without target amplification and plays an instructive role in other virus diagnosis.

Optogenetic Calcium Ion Influx in Myoblasts and Myotubes by Near-Infrared Light Using Upconversion Nanoparticles

Bioactuators made of cultured skeletal muscle cells are generally driven by electrical or visible light stimuli. Among these, the technology to control skeletal muscle consisting of myoblasts genetically engineered to express photoreceptor proteins with visible light is very promising, as there is no risk of cell contamination by electrodes, and the skeletal muscle bioactuator can be operated remotely. However, due to the low biopermeability of visible light, it can only be applied to thin skeletal muscle films, making it difficult to realize high-power bioactuators consisting of thick skeletal muscle. To solve this problem, it is desirable to realize thick skeletal muscle bioactuators that can be driven by near-infrared (NIR) light, to which living tissue is highly permeable. In this study, as a promising first step, upconversion nanoparticles (UCNPs) capable of converting NIR light into blue light were bound to C2C12 myoblasts expressing the photoreceptor protein channelrhodopsin-2 (ChR2), and the myoblasts calcium ion (Ca2+) influx was remotely manipulated by NIR light exposure. UCNP-bound myoblasts and UCNP-bound differentiated myotubes were exposed to NIR light, and the intracellular Ca2+ concentrations were measured and compared to myoblasts exposed to blue light. Exposure of the UCNP-bound cells to NIR light was found to be more efficient than exposure to blue light in terms of stimulating Ca2+ influx.

Recent advances in rare earth ion-doped upconversion nanomaterials: From design to their applications in food safety analysis

The misuse of chemicals in agricultural systems and food production leads to an increase in contaminants in food, which ultimately has adverse effects on human health. This situation has prompted a demand for sophisticated detection technologies with rapid and sensitive features, as concerns over food safety and quality have grown around the globe. The rare earth ion-doped upconversion nanoparticle (UCNP)-based sensor has emerged as an innovative and promising approach for detecting and analyzing food contaminants due to its superior photophysical properties, including low autofluorescence background, deep penetration of light, low toxicity, and minimal photodamage to the biological samples. The aim of this review was to discuss an outline of the applications of UCNPs to detect contaminants in food matrices, with particular attention on the determination of heavy metals, pesticides, pathogenic bacteria, mycotoxins, and antibiotics. The review briefly discusses the mechanism of upconversion (UC) luminescence, the synthesis, modification, functionality of UCNPs, as well as the detection principles for the design of UC biosensors. Furthermore, because current UCNP research on food safety detection is still at an early stage, this review identifies several bottlenecks that must be overcome in UCNPs and discusses the future prospects for its application in the field of food analysis.

Development of an Fe2+ sensing system based on the inner filter effect between upconverting nanoparticles and ferrozine

The ferrozine (FZ) assay is a vital oxidation state-specific colorimetric assay for the quantification of Fe2+ ions in environmental samples due to its sharp increase in absorbance at 562 nm upon addition of Fe2+. However, it has yet to be applied to corresponding fluoresence assays which typically offer higher sensitivites and lower detection limits. In this article we present for the first time its pairing with upconverting luminescent nanomaterials to enable detection of Fe2+via the inner filter effect using a low-power continuous wave diode laser (45 mW). Upon near infra-red excitation at 980 nm, the overlap of the upconversion emission of Er3+ at approximately 545 nm and the absorbance of the FZ:Fe2+ complex at 562 nm enabled measurement in the change of UCNP emission response as a function of Fe2+ concentration in a ratiometric manner. We first applied large, ultra-bright poly(acrylic acid) (PAA)-capped Gd2O2S:Yb3+,Er3+ UCNPs upconverting nanoparticles (UCNPs) for the detection of Fe2+ using FZ as the acceptor. The probe displayed good selectivity and sensitivity for Fe2+, with a low limit of detection (LoD) of 2.74 μM. Analogous results employing smaller (31 nm) PAA-capped hexagonal-phase NaYF4:Yb3+,Er3+ UCNPs synthesised in our lab were achieved, with a lower LoD towards Fe2+ of 1.43 μM. These results illustrate how the ratiometric nature of the system means it is applicable over a range of particle sizes, brightnesses and nanoparticle host matrices. Preliminary investigations also found the probes capable of detecting micromolar concentrations of Fe2+ in turbid solutions.

Artificial Intelligence-Aided Massively Parallel Spectroscopy of Freely Diffusing Nanoscale Entities

Massively parallel spectroscopy (MPS) of many single nanoparticles in an aqueous dispersion is reported. As a model system, bioconjugated photon-upconversion nanoparticles (UCNPs) with a near-infrared excitation are prepared. The UCNPs are doped either with Tm3+ (emission 450 and 802 nm) or Er3+ (emission 554 and 660 nm). These UCNPs are conjugated to biotinylated bovine serum albumin (Tm3+-doped) or streptavidin (Er3+-doped). MPS is correlated with an ensemble spectra measurement, and the limit of detection (1.6 fmol L-1) and the linearity range (4.8 fmol L-1 to 40 pmol L-1) for bioconjugated UCNPs are estimated. MPS is used for observing the bioaffinity clustering of bioconjugated UCNPs. This observation is correlated with a native electrophoresis and bioaffinity assay on a microtiter plate. A competitive MPS bioaffinity assay for biotin is developed and characterized with a limit of detection of 6.6 nmol L-1. MPS from complex biological matrices (cell cultivation medium) is performed without increasing background. The compatibility with polydimethylsiloxane microfluidics is proven by recording MPS from a 30 μm deep microfluidic channel.

π-Conjugated Polymer Nanoparticles from Design, Synthesis to Biomedical Applications: Sensing, Imaging, and Therapy

In the past decade, π-conjugated polymer nanoparticles (CPNs) have been considered as promising nanomaterials for biomedical applications, and are widely used as probe materials for bioimaging and drug delivery. Due to their distinctive photophysical and physicochemical characteristics, good compatibility, and ease of functionalization, CPNs are gaining popularity and being used in more and more cutting-edge biomedical sectors. Common synthetic techniques can be used to synthesize CPNs with adjustable particle size and dispersion. More importantly, the recent development of CPNs for sensing and imaging applications has rendered them as a promising device for use in healthcare. This review provides a synopsis of the preparation and functionalization of CPNs and summarizes the recent advancements of CPNs for biomedical applications. In particular, we discuss their major role in bioimaging, therapeutics, fluorescence, and electrochemical sensing. As a conclusion, we highlight the challenges and future perspectives of biomedical applications of CPNs.

Aptameric Fluorescent Biosensors for Liver Cancer Diagnosis

Liver cancer is a prevalent global health concern with a poor 5-year survival rate upon diagnosis. Current diagnostic techniques using the combination of ultrasound, CT scans, MRI, and biopsy have the limitation of detecting detectable liver cancer when the tumor has already progressed to a certain size, often leading to late-stage diagnoses and grim clinical treatment outcomes. To this end, there has been tremendous interest in developing highly sensitive and selective biosensors to analyze related cancer biomarkers in the early stage diagnosis and prescribe appropriate treatment options. Among the various approaches, aptamers are an ideal recognition element as they can specifically bind to target molecules with high affinity. Furthermore, using aptamers, in conjunction with fluorescent moieties, enables the development of highly sensitive biosensors by taking full advantage of structural and functional flexibility. This review will provide a summary and detailed discussion on recent aptamer-based fluorescence biosensors for liver cancer diagnosis. Specifically, the review focuses on two promising detection strategies: (i) Förster resonance energy transfer (FRET) and (ii) metal-enhanced fluorescence for detecting and characterizing protein and miRNA cancer biomarkers.

Understanding FRET in Upconversion Nanoparticle Nucleic Acid Biosensors

Upconversion nanoparticles (UCNPs) have been frequently applied in Förster resonance energy transfer (FRET) bioanalysis. However, the understanding of how surface coatings, bioconjugation, and dye-surface distance influence FRET biosensing performance has not significantly advanced. Here, we investigated UCNP-to-dye FRET DNA-hybridization assays in H₂O and D₂O using ∼24 nm large NaYF₄:Yb³⁺,Er³⁺ UCNPs coated with thin layers of silica (SiO₂) or poly(acrylic acid) (PAA). FRET resulted in strong distance-dependent PL intensity changes. However, the PL decay times were not significantly altered because of continuous Yb³⁺-to-Er³⁺ energy migration during Er³⁺-to-dye FRET. Direct bioconjugation of DNA to the thin PAA coating combined with the closest possible dye-surface distance resulted in optimal FRET performance with minor influence from competitive quenching by H₂O. The better comprehension of UCNP-to-dye FRET was successfully translated into a microRNA (miR-20a) FRET assay with a limit of detection of 100 fmol in a 80 μL sample volume.

Recent advances in tumor biomarker detection by lanthanide upconversion nanoparticles

Early tumor diagnosis could reliably predict the behavior of tumors and significantly reduce their mortality. Due to the response to early cancerous changes at the molecular or cellular level, tumor biomarkers, including small molecules, proteins, nucleic acids, exosomes, and circulating tumor cells, have been employed as powerful tools for early cancer diagnosis. Therefore, exploring new approaches to detect tumor biomarkers has attracted a great deal of research interest. Lanthanide upconversion nanoparticles (UCNPs) provide numerous opportunities for bioanalytical applications. When excited by low-energy near-infrared light, UCNPs exhibit several unique properties, such as large anti-Stoke shifts, sharp emission lines, long luminescence lifetimes, resistance to photobleaching, and the absence of autofluorescence. Based on these excellent properties, UCNPs have demonstrated great sensitivity and selectivity in detecting tumor biomarkers. In this review, an overview of recent advances in tumor biomarker detection using UCNPs has been presented. The key aspects of this review include detection mechanisms, applications in vitro and in vivo, challenges, and perspectives of UCNP-based tumor biomarker detection.

The Coming of Age of Neodymium: Redefining Its Role in Rare Earth Doped Nanoparticles

Among luminescent nanostructures actively investigated in the last couple of decades, rare earth (RE³⁺) doped nanoparticles (RENPs) are some of the most reported family of materials. The development of RENPs in the biomedical framework is quickly making its transition to the ∼800 nm excitation pathway, beneficial for both in vitro and in vivo applications to eliminate heating and facilitate higher penetration in tissues. Therefore, reports and investigations on RENPs containing the neodymium ion (Nd³⁺) greatly increased in number as the focus on ∼800 nm radiation absorbing Nd³⁺ ion gained traction. In this review, we cover the basics behind the RE³⁺ luminescence, the most successful Nd³⁺-RENP architectures, and highlight application areas. Nd³⁺-RENPs, particularly Nd³⁺-sensitized RENPs, have been scrutinized by considering the division between their upconversion and downshifting emissions. Aside from their distinctive optical properties, significant attention is paid to the diverse applications of Nd³⁺-RENPs, notwithstanding the pitfalls that are still to be addressed. Overall, we aim to provide a comprehensive overview on Nd³⁺-RENPs, discussing their developmental and applicative successes as well as challenges. We also assess future research pathways and foreseeable obstacles ahead, in a field, which we believe will continue witnessing an effervescent progress in the years to come.

Differential sensitization toward lanthanide metal-organic framework for detection of an anthrax biomarker

A novel Tb-doped Eu-based metal-organic framework (Eu-MOF@Tb) has been developed by incorporating hexanuclear europium cluster and 2,2'-bipyridine-5,5'-dicarboxylic acid as well as coordination with Tb(III). Owing to the diverse coordination status of Tb(III) and Eu(III) in MOF, antenna effect emission from Tb(III) can be invoked by dipicolinic acid (DPA), but the luminescence originating from Eu(III) remains unchanged. Taking advantage of this phenomenon, a ratiometric luminescent method for detection of DPA, a biomarker for Bacillus subtilis spores, was developed through differential sensitization toward lanthanide ions. This analysis method allowed for the detection of DPA in the 0.2-10 μM concentration range, with a detection limit of 60 nM. It was further validated by spiked recoveries (89.3-110%) of real-world samples with RSD values in the range 3.9-11%. Alongside this, a paper indicator test was prepared for naked-eye detection of DPA via a dose-sensitive color evolution from red to green under UV light. The effectiveness of the proposed approach was explored in the detection of bacterial spores in real biological and environmental samples and indicated great potential for applications as a real-time monitoring system against the anthrax threat.

A New Microporous Lanthanide Metal-Organic Framework with a Wide Range of pH Linear Response

Lanthanide metal-organic frameworks (Ln-MOFs) have attracted extensive attention because of their structural adjustability and wide optical function applications. However, MOFs with a wide linear pH response and stable framework structures in acidic or alkaline solutions are rare to date. Here, we used 4,4',4″-s-triazine-2,4,6-triyltribenzoate (H₃TATB) as an organic ligand, coordinated with lanthanide ions (Eu³⁺/Tb³⁺), and synthesized a new metal-organic framework material. The material has a porous three-dimensional square framework structure and emits bright red or green fluorescence under 365 nm UV light. The carboxyl group of the ligand is prone to protonation in an acidic environment, and negatively charged OH^- and ligand (TATB^3-) have a competitive effect in an alkaline environment, which could affect the coordination ability of ligand. The luminescence degree of the framework decreases with the increase in the degree of acid and base. In particular, such fluorescence changes have a wide linear response (pH = 0-14), which can be used as a potential fluorescence sensing material for pH detection.

Advances in upconversion luminescence nanomaterial-based biosensor for virus diagnosis

Various infectious viruses have been posing a major threat to global public health, especially SARS-CoV-2, which has already claimed more than six million lives up to now. Tremendous efforts have been made to develop effective techniques for rapid and reliable pathogen detection. The unique characteristics of upconversion nanoparticles (UCNPs) pose numerous advantages when employed in biosensors, and they are a promising candidate for virus detection. Herein, this Review will discuss the recent advancement in the UCNP-based biosensors for virus and biomarkers detection. We summarize four basic principles that guide the design of UCNP-based biosensors, which are utilized with luminescent or electric responses as output signals. These strategies under fundamental mechanisms facilitate the enhancement of the sensitivity of UCNP-based biosensors. Moreover, a detailed discussion and benefits of applying UCNP in various virus bioassays will be presented. We will also address some obstacles in these detection techniques and suggest routes for progress in the field. These progressions will undoubtedly pose UCNP-based biosensors in a prominent position for providing a convenient, alternative approach to virus detection.

Recent Development in Sensitizers for Lanthanide-Doped Upconversion Luminescence

The attractive features of lanthanide-doped upconversion luminescence (UCL), such as high photostability, nonphotobleaching or photoblinking, and large anti-Stokes shift, have shown great potentials in life science, information technology, and energy materials. Therefore, UCL modulation is highly demanded toward expected emission wavelength, lifetime, and relative intensity in order to satisfy stringent requirements raised from a wide variety of areas. Unfortunately, the majority of efforts have been devoted to either simple codoping of multiple activators or variation of hosts, while very little attention has been paid to the critical role that sensitizers have been playing. In fact, different sensitizers possess different excitation wavelengths and different energy transfer pathways (to different activators), which will lead to different UCL features. Thus, rational design of sensitizers shall provide extra opportunities for UCL tuning, particularly from the excitation side. In this review, we specifically focus on advances in sensitizers, including the current status, working mechanisms, design principles, as well as future challenges and endeavor directions.

Inner filter effect-based upconversion fluorescence sensing of sulfide ions

Upconversion nanocrystals (UCNCs) have emerged as a new type of fluorescent probe for sensing applications. Herein, we designed a 980 nm excited upconversion luminescence system, composed of core-shell-structured NaYF₄ : Yb,Er@NaYF₄ : Yb nanocrystals (csUCNCs) and the triethylenetetramine-Cu complex (complex-I), for quantitative detection of sulfide ions. Taking advantage of the specific recognition of complex-I toward S^2-, the as-formed compound (complex-II) exhibits excellent spectral overlap not only in the range of fluorescence emissions of UCNCs but also in the excitation wavelength for UCNCs; fluorescence quenching of UCNCs occurs where the complex-II acts as the energy acceptor. Due to the electrostatic repulsion between positively charged ligand-free csUCNCs and complex-I, the fluorescence quenching is based on the primary and secondary inner filter effect rather than the fluorescence resonance energy transfer process. The detection limit of S^2- for the upconversion-based system is calculated to be 2.7 μM, exhibiting higher detection sensitivity over the single complex-I compound measured by the spectrophotometric method. Moreover, no significant variation in upconversion luminescence is observed upon the addition of other interfering ions, showing the excellent selectivity of this nanoprobe toward S^2-.

Ratiometrically pH-Insensitive Upconversion Nanoprobe: Toward Simultaneously Quantifying Organellar Calcium and Chloride and Understanding the Interaction of the Two Ions in Lysosome Function

Calcium and chloride levels are closely related to lysosome dysfunction. However, the simultaneous measurement of calcium (Ca²⁺) and chloride (Cl^-) in acidic subcellular organelles, which is conducive to a deep understanding of lysosome-related biological events, remains a challenge. In this study, we developed a pH-insensitive, ratiometric NIR nanoprobe for the simultaneous detection of Ca²⁺ and Cl^- in acidic lysosomes and determined the roles of the two ions in lysosome function. The upconversion nanoprobe with blue, green, and red emissions was modified with a Ca²⁺-sensitive dye (Rhod-5N) and Cl^--responsive fluorophore (10,10'-bis[3-carboxypropyl]-9,9'-biacridinium dinitrate, BAC). As a result of a dual-luminescence resonance energy transfer between upconversion nanoparticles (UCNPs) and Rhod-5N/BAC, the blue and green upconversion luminescence (UCL) of UCNPs were quenched and the red UCL was used as the reference signal. The ratiometric upconversion nanoprobe possesses a specific ability for the concurrent recognition of Ca²⁺ and Cl^- ions independent of the influence of the environmental pH. To locate the probe in the lysosome, dextran was further modified with upconversion nanoparticles. Then, the nanoprobe with a high spatial resolution was constructed for the simultaneous monitoring of Ca²⁺ and Cl^- in acidic lysosomes. Moreover, it was found that the reduction of lysosomal Cl^- affects the release of lysosomal Ca²⁺, which further blocks the activities of specific lysosomal enzymes. The ratiometric NIR nanoprobe has great potential for decoding and evaluating lysosomal diseases.

Examining the effect of information and communication technology, innovations, and renewable energy consumption on CO2 emission: evidence from BRICS countries

The increasing use of information and communication technology (ICT) in this digital era and its interlinkage with other economic and environmental factors have gotten considerable attention from researchers. ICT tools are considered very important in economic activities such as international trade, the financial sector, and foreign direct investment. ICT is also interlinked with innovation and energy consumption. However, ICT with these activities influences ecological footprint, especially in emerging economies such as BRICS (Brazil, Russia, India, China, and South Africa) countries. Therefore, this topic has got considerable attention from researchers and policy makers on the impact of ICT and economic growth activities on environmental quality. Consequently, this study investigates the impact of information and communication technology, renewable energy consumption and innovation on carbon dioxide emission in BRICS countries from 1990 to 2019 using cointegration, generalized least square, and panel corrected standard errors models. The findings show that two ICT indicators, mobile cellular subscription and fixed broadband subscription, negatively affect carbon emission along with economic growth and financial development. Innovation and renewable energy consumption also significantly reduce emission in presence of ICT indicators, while trade openness and fixed telephone subscriptions increase it. In the case of the ICT index model, all variables are positively associated with carbon emission except renewable energy consumption, however, the square and interaction term of all indicators significantly reduce carbon emission and evidence the environmental Kuznets curve hypothesis except trade openness. ICT growth should be considered in the energy sector, innovation, and financial development to enhance environmental quality. The findings of the study have considerable policy implications for the sample countries.

Modification-Free Fluorescent Biosensor for CEA Based on Polydopamine-Coated Upconversion Nanoparticles

Upconversion nanoparticles (UCNPs) have achieved considerable success in protein sensing in vitro. And aptamer is one of the most frequently used biomolecules to modify the nanoparticles for protein assay. However, the complicated process of modifying UCNPs with DNA and the susceptibility of the phosphate groups of DNA backbone to adsorb on the surface of UCNPs have limited their practical applications. To overcome these limitations, a modification-free fluorescent biosensor based on polydopamine-coated upconversion nanoparticles (UCNPs@PDA) is proposed. It consists of UCNPs@PDA and CEA aptamer-functionalized AuNPs (AuNPs-CEA aptamer). The CEA aptamer on AuNPs can be adsorbed onto the surface of UCNPs@PDA due to the interactions of π-π stacking and hydrogen bonding, triggering the process of fluorescence resonance energy transfer (FRET) from UCNPs@PDA to AuNPs-CEA aptamer. In the presence of CEA, the AuNPs-CEA aptamer departs from UCNPs@PDA due to the stronger affinity of CEA with its aptamer. Therefore, the recovery of upconversion fluorescence can sensitively quantify the concentration of CEA. This biosensor provides a linear range from 0.1 to 100 ng/mL for CEA with a LOD of 0.031 ng/mL in an aqueous solution. In spiked human serum samples, the same linear range is acquired with a slightly higher LOD of 0.055 ng/mL, demonstrating the great potential of the biosensor in practical application.

Activators Confined Upconversion Nanoprobe with Near-Unity Förster Resonance Energy Transfer Efficiency for Ultrasensitive Detection

Lanthanide-doped upconversion nanoparticles (UCNPs) as energy donors for Förster resonance energy transfer (FRET) are promising in biosensing, bioimaging, and therapeutic applications. However, traditional FRET-based UC nanoprobes show low efficiency and poor sensitivity because only partial activators in UCNPs possessing suitable distance with energy acceptors (<10 nm) can activate the FRET process. Herein, a novel excited-state energy distribution-modulated upconversion nanostructure is explored for highly efficient FRET. Integration of the optimal 4% Er³⁺ doped shell and 100% Yb³⁺ core achieves ∼4.5-fold UC enhancement compared with commonly used NaYF₄:20%Yb³⁺,2%Er³⁺ nanoparticles, enabling maximum donation of excitation energy to an acceptor. The spatial confinement strategy shortens significantly the energy-transfer distance (∼4.5 nm) and thus demonstrates experimentally a 91.9% FRET efficiency inside the neutral red (NR)-conjugated NaYbF₄@NaYF₄:20%Yb³⁺,4%Er³⁺ nanoprobe, which greatly outperforms the NaYbF₄@NaYF₄:20%Yb³⁺,4%Er³⁺@SiO₂@NR nanoprobe (27.7% efficiency). Theoretical FRET efficiency calculation and in situ single-nanoparticle FRET measurement further confirm the excellent energy-transfer behavior. The well-designed nanoprobe shows a much lower detection limit of 0.6 ng/mL and higher sensitivity and is superior to the reported NO₂^- probes. Our work provides a feasible strategy to exploit highly efficient FRET-based luminescence nanoprobes for ultrasensitive detection of analytes.

Ultrafast synthesized monometallic nanohybrids as an efficient quencher and recognition antenna of upconversion nanoparticles for the detection of xanthine with enhanced sensitivity and selectivity

Upconversion nanoparticles (UCNPs) have shown great promise in bioanalytical applications owing to their excellent optical properties. Generally, most analytical applications are based on the fluorescence resonance energy transfer (FRET) principle to quench the fluorescence of UCNPs. However, each UCNP contains thousands of emission center ions, and most of them exceed the FRET critical distance, which hinders FRET efficiency and leads to a low signal-to-background ratio (SBR). Herein, a novel nanoprobe for the detection of Xanthine (XA) based on inner filter effects (IFE) and cascade signal amplification strategy was constructed by decorating UCNP with trypsin-chymotrypsin-stabilized gold nanoparticles-gold nanoclusters (Try-chy-AuNPs-AuNCs) monometallic nanohybrids. The Try-chy-AuNPs-AuNCs prepared by ultrafast (3 min) and green synthesis method have efficient upconversion fluorescence quenching ability (the quenching efficiency up to 90.9%), which can effectively improve the SBR of the probe, so as to improve the sensitivity. In addition, the Try-chy-AuNPs-AuNCs have a unique spatial structure, which can effectively prevent the interaction between large-size biothiol (glutathione) and the probe, thus improving its selectivity. Besides, combined with the excellent optical performance of UCNPs and cascaded signal amplification strategy, the sensitivity of the probe can be further improved. Under the optimized conditions, the linear response range of the probe was obtained from 0.05 to 50 μM, 0.06-80 μM and with the low detection limit of 22.6 nM and 26.3 nM for H₂O₂ and XA, respectively. Meanwhile, the developed method has been further applied to the detection of XA in human serum with satisfactory results.

Simultaneous ultraviolet-C and near-infrared enhancement in heterogeneous lanthanide nanocrystals

Lanthanide-doped nanocrystals that simultaneously convert near-infrared (NIR) irradiation into emission of shorter (ultraviolet-C, UVC) and longer wavelengths (NIR) offer many exciting opportunities for application in drug release, photodynamic therapy, deep-tissue bioimaging, and solid-state lasing. However, a formidable challenge is the development of lanthanide-doped nanocrystals with efficient UVC and NIR emissions simultaneously due to their low conversion efficiency. Here, we report a dye-sensitized heterogeneous core-multishell architecture with enhanced UVC emission and NIR emission under 793 nm excitation. This nanocrystal design efficiently suppresses energy trapping induced by interior lattice defects and promotes upconverted UVC emission from Gd³⁺. Moreover, a significant downshifting emission from Yb³⁺ at 980 nm was also observed owing to an efficient energy transfer from Nd³⁺ to Yb³⁺. Furthermore, by taking advantage of ICG sensitization, we realized a largely enhanced emission from the UVC to NIR spectral region. This study provides a mechanistic understanding of the upconversion and downshifting processes within a heterogeneous architecture while offering exciting opportunities for important biological and energy applications.

Lanthanide-Doped Upconversion Luminescent Nanoparticles-Evolving Role in Bioimaging, Biosensing, and Drug Delivery

Upconverting luminescent nanoparticles (UCNPs) are "new generation fluorophores" with an evolving landscape of applications in diverse industries, especially life sciences and healthcare. The anti-Stokes emission accompanied by long luminescence lifetimes, multiple absorptions, emission bands, and good photostability, enables background-free and multiplexed detection in deep tissues for enhanced imaging contrast. Their properties such as high color purity, high resistance to photobleaching, less photodamage to biological samples, attractive physical and chemical stability, and low toxicity are affected by the chemical composition; nanoparticle crystal structure, size, shape and the route; reagents; and procedure used in their synthesis. A wide range of hosts and lanthanide ion (Ln3+) types have been used to control the luminescent properties of nanosystems. By modification of these properties, the performance of UCNPs can be designed for anticipated end-use applications such as photodynamic therapy (PDT), high-resolution displays, bioimaging, biosensors, and drug delivery. The application landscape of inorganic nanomaterials in biological environments can be expanded by bridging the gap between nanoparticles and biomolecules via surface modifications and appropriate functionalization. This review highlights the synthesis, surface modification, and biomedical applications of UCNPs, such as bioimaging and drug delivery, and presents the scope and future perspective on Ln-doped UCNPs in biomedical applications.

Advances in Photodynamic Therapy Based on Nanotechnology and Its Application in Skin Cancer

Comprehensive cancer treatments have been widely studied. Traditional treatment methods (e.g., radiotherapy, chemotherapy), despite ablating tumors, inevitably damage normal cells and cause serious complications. Photodynamic therapy (PDT), with its low rate of trauma, accurate targeting, synergism, repeatability, has displayed great advantages in the treatment of tumors. In recent years, nanotech-based PDT has provided a new modality for cancer treatment. Direct modification of PSs by nanotechnology or the delivery of PSs by nanocarriers can improve their targeting, specificity, and PDT efficacy for tumors. In this review, we strive to provide the reader with a comprehensive overview, on various aspects of the types, characteristics, and research progress of photosensitizers and nanomaterials used in PDT. And the application progress and relative limitations of nanotech-PDT in non-melanoma skin cancer and melanoma are also summarized.

Advances in fluorescence sensing enabled by lanthanide-doped upconversion nanophosphors

Lanthanide-doped upconversion nanoparticles (UCNPs), characterized by converting low-energy excitation to high-energy emission, have attracted considerable interest due to their inherent advantages of large anti-Stokes shifts, sharp and narrow multicolor emissions, negligible autofluorescence background interference, and excellent chemical- and photo-stability. These features make them promising luminophores for sensing applications. In this review, we give a comprehensive overview of lanthanide-doped upconversion nanophosphors including the fundamental principle for the construction of UCNPs with efficient upconversion luminescence (UCL), followed by state-of-the-art strategies for the synthesis and surface modification of UCNPs, and finally describing current advances in the sensing application of upconversion-based probes for the quantitative analysis of various analytes including pH, ions, molecules, bacteria, reactive species, temperature, and pressure. In addition, emerging sensing applications like photodetection, velocimetry, electromagnetic field, and voltage sensing are highlighted.

Use of DNA nanosensors based on upconverting nanoparticles for detection of Nosema bombycis by fluorescence resonance energy transfer

In this study, NaYF₄:20%Yb, 2%Er upconverting nanoparticles (UCNPs) were synthesized by solvothermal method and characterized by transmission electron microscopy and upconversion fluorescence spectrometry. The results showed that the UCNP particles present good dispersion and uniform spherical shape with a size of 29 ~ 42 nm. Hydroxyl UCNPs were converted to hydrophilic carboxylic acid-functionalized ones by ligand exchange, and the streptavidin was attached on the surface of carboxylic acid-functionalized UCNPs via amide bond. The DNA nanosensors based on UCNPs with DNA probes have been successfully developed. Only the genomic DNA of Nosema bombycis can be specifically detected by the DNA nanosensors when the DNA of Bombyx mori and its pathogens was used as target DNA. When the DNA nanosensors were used to detect the DNA of N. bombycis, a broad emission peak signal appeared at 580 nm. There is linear relationship between the signal intensity and DNA concentration of N. bombycis, I₅₈₀/I₅₄₅ (R² = 0.820) and I₅₄₅/I₆₅₄ (R² = 0.901). The detectable minimum concentration of genomic DNA of N. bombycis was 100 ng/μL while the tested concentrations of N. bombycis genomic DNA were 3000 ng/μL, 1500 ng/μL, 1000 ng/μL, 500 ng/μL, 250 ng/μL, and 100 ng/μL, respectively. The whole detection process for target DNA takes less than 60 min.

Applications of upconversion nanoparticles in cellular optogenetics

Upconversion-mediated optogenetics is an emerging powerful technique to remotely control and manipulate the deep-tissue protein functions and signaling pathway activation. This technique uses lanthanide upconversion nanoparticles (UCNPs) as light transducers and through near-infrared light to indirectly activate the traditional optogenetic proteins. With the merits of high spatiotemporal resolution and minimal invasiveness, this technique enables cell-type specific manipulation of cellular activities in deep tissues as well as in living animals. In this review, we introduce the latest development of optogenetic modules and UCNPs, with emphasis on the integration of UCNPs with cellular optogenetics and their biomedical applications on the control of neural/brain activity, cancer therapy and cardiac optogenetics in vivo. Furthermore, we analyze the current developed strategies to optimize and advance the upconversion-mediated optogenetics and discuss the remaining challenges of its further applications in biomedical study and clinical translational research. STATEMENT OF SIGNIFICANCE: Optogenetics harnesses photoactivatable proteins to optically stimulate and control intracellular activities. UCNPs-mediated NIR-activatable optogenetics uses lanthanide upconversion nanoparticles (UCNPs) as light transducers and utilizes near-infrared (NIR) light to indirectly activate the traditional optogenetic proteins. The integration of UCNPs with cellular optogenetics has showed great promise in biomedical applications in regulating neural/brain activity, cancer therapy and cardiac optogenetics in vivo. The evolution and optimization of functional UCNPs and the discovery and engineering of novel optogenetic modules would both contribute to the advance of such unique hybrid technology, which may lead to discoveries in biomedical research and provide new treatments for human diseases.

Enantiospecific Detection of D-Amino Acid through Synergistic Upconversion Energy Transfer

D-amino acids (DAAs) are indispensable in regulating diverse metabolic pathways. Selective and sensitive detection of DAAs is crucial for understanding the complexity of metabolic processes and managing associated diseases. However, current DAA detection strategies mainly rely on bulky instrumentation or electrochemical probes, limiting their cellular and animal applications. Here we report an enzyme-coupled nanoprobe that can detect enantiospecific DAAs through synergistic energy transfer. This nanoprobe offers near-infrared upconversion capability, a wide dynamic detection range, and a detection limit of 2.2 μM, providing a versatile platform for in vivo noninvasive detection of DAAs with high enantioselectivity. These results potentially allow real-time monitoring of biomolecular handedness in living animals, as well as developing antipsychotic treatment strategies.

Photoluminescent Nanoparticles for Chemical and Biological Analysis and Imaging

Research related to the development and application of luminescent nanoparticles (LNPs) for chemical and biological analysis and imaging is flourishing. Novel materials and new applications continue to be reported after two decades of research. This review provides a comprehensive and heuristic overview of this field. It is targeted to both newcomers and experts who are interested in a critical assessment of LNP materials, their properties, strengths and weaknesses, and prospective applications. Numerous LNP materials are cataloged by fundamental descriptions of their chemical identities and physical morphology, quantitative photoluminescence (PL) properties, PL mechanisms, and surface chemistry. These materials include various semiconductor quantum dots, carbon nanotubes, graphene derivatives, carbon dots, nanodiamonds, luminescent metal nanoclusters, lanthanide-doped upconversion nanoparticles and downshifting nanoparticles, triplet-triplet annihilation nanoparticles, persistent-luminescence nanoparticles, conjugated polymer nanoparticles and semiconducting polymer dots, multi-nanoparticle assemblies, and doped and labeled nanoparticles, including but not limited to those based on polymers and silica. As an exercise in the critical assessment of LNP properties, these materials are ranked by several application-related functional criteria. Additional sections highlight recent examples of advances in chemical and biological analysis, point-of-care diagnostics, and cellular, tissue, and in vivo imaging and theranostics. These examples are drawn from the recent literature and organized by both LNP material and the particular properties that are leveraged to an advantage. Finally, a perspective on what comes next for the field is offered.

Six-photon upconverted excitation energy lock-in for ultraviolet-C enhancement

Photon upconversion of near-infrared (NIR) irradiation into ultraviolet-C (UVC) emission offers many exciting opportunities for drug release in deep tissues, photodynamic therapy, solid-state lasing, energy storage, and photocatalysis. However, NIR-to-UVC upconversion remains a daunting challenge due to low quantum efficiency. Here, we report an unusual six-photon upconversion process in Gd³⁺/Tm³⁺-codoped nanoparticles following a heterogeneous core-multishell architecture. This design efficiently suppresses energy consumption induced by interior energy traps, maximizes cascade sensitizations of the NIR excitation, and promotes upconverted UVC emission from high-lying excited states. We realized the intense six-photon-upconverted UV emissions at 253 nm under 808 nm excitation. This work provides insight into mechanistic understanding of the upconversion process within the heterogeneous architecture, while offering exciting opportunities for developing nanoscale UVC emitters that can be remotely controlled through deep tissues upon NIR illumination.

Photon upconversion with near-infrared excitation and ultraviolet emission has many applications, but suffers from low quantum efficiency. Here, the authors report a six-photon upconversion process in nanoparticles with heterogeneous core-multishell structure, that regulate the energy transfer pathway.

Spatially Selective Imaging of Mitochondrial MicroRNAs via Optically Programmable Strand Displacement Reactions

MicroRNA (miRNA) functions are tightly regulated by their sub-compartmental location in living cells, and the ability to imaging of mitochondrial miRNAs (mitomiRs) is essential for understanding of the related pathological processes. However, most existing DNA-based methods could not be used for this purpose. Here, we report the development of a DNA nanoreporter technology for imaging of mitomiRs in living cells through near-infrared (NIR) light-controlled DNA strand displacement reactions. The sensing function of the DNA nanoreporters are silent (OFF) during the delivery process, but can be photoactivated (ON) with NIR light after targeted mitochondrial localization, enabling spatially-restricted imaging of two types of cancer-related mitomiRs with improved detection accuracy. Furthermore, we demonstrate imaging of mitomiRs in vivo through spatiotemporally-controlled delivery and activation. Therefore, this study illustrates a simple methodology that may be broadly applicable for investigating the mitomiRs-associated physiological events.