Discovery and Biosensing Applications of Diverse RNA-Cleaving DNAzymes

Site-specific N-alkylation of DNA oligonucleotide nucleobases by DNAzyme-catalyzed reductive amination

DNA and RNA nucleobase modifications are biologically relevant and valuable in fundamental biochemical and biophysical investigations of nucleic acids. However, directly introducing site-specific nucleobase modifications into long unprotected oligonucleotides is a substantial challenge. In this study, we used in vitro selection to identify DNAzymes that site-specifically N-alkylate the exocyclic nucleobase amines of particular cytidine, guanosine, and adenosine (C, G and A) nucleotides in DNA substrates, by reductive amination using a 5'-benzaldehyde oligonucleotide as the reaction partner. The new DNAzymes each require one or more of Mg2+, Mn2+, and Zn2+ as metal ion cofactors and have kobs from 0.04 to 0.3 h-1, with rate enhancement as high as ∼104 above the splinted background reaction. Several of the new DNAzymes are catalytically active when an RNA substrate is provided in place of DNA. Similarly, several new DNAzymes function when a small-molecule benzaldehyde compound replaces the 5'-benzaldehyde oligonucleotide. These findings expand the scope of DNAzyme catalysis to include nucleobase N-alkylation by reductive amination. Further development of this new class of DNAzymes is anticipated to facilitate practical covalent modification and labeling of DNA and RNA substrates.

A high-fidelity DNAzyme-assisted CRISPR/Cas13a system with single-nucleotide resolved specificity

A CRISPR/Cas system represents an innovative tool for developing a new-generation biosensing and diagnostic strategy. However, the off-target issue (i.e., mistaken cleavage of nucleic acid targets and reporters) remains a great challenge for its practical applications. We hypothesize that this issue can be overcome by taking advantage of the site-specific cleavage ability of RNA-cleaving DNAzymes. To test this idea, we propose a DNAzyme Operation Enhances the Specificity of CRISPR/Cas13a strategy (termed DOES-CRISPR) to overcome the problem of relatively poor specificity that is typical of the traditional CRISPR/Cas13a system. The key to the design is that the partial hybridization of the CRISPR RNA (crRNA) with the cleavage fragment of off-target RNA was not able to activate the collateral cleavage activity of Cas13a. We showed that DOES-CRISPR can significantly improve the specificity of traditional CRISPR/Cas13a-based molecular detection by up to ∼43-fold. The broad utility of the strategy is illustrated through engineering three different systems for the detection of microRNAs (miR-17 and let-7e), CYP2C19*17 gene, SARS-Cov-2 variants (Gamma, Delta, and Omicron) and Omicron subtypes (BQ.1 and XBB.1) with single-nucleotide resolved specificity. Finally, clinical evaluation of this assay using 10 patient blood samples demonstrated a clinical sensitivity of 100% and specificity of 100% for genotyping CYP2C19*17, and analyzing 20 throat swab samples provided a diagnostic sensitivity of 95% and specificity of 100% for Omicron detection, and a clinical sensitivity of 92% and specificity of 100% for XBB.1 detection.

Modular Engineering of Aptamer-Based Nanobiotechnology for Conditional Control of ATP Sensing

Dynamic changes of intracellular, extracellular, and subcellular adenosine triphosphates (ATPs) have fundamental interdependence with the physio-pathological states of cells. Spatially selective in situ imaging of such ATP dynamics offers valuable mechanistic insights into the related biological activities. Despite significant advances in the design of aptamer sensors for ATP detection, the dearth of methods that enable precise ATP imaging in specific cellular locations remains a challenge in this field. This review focuses on the modular engineering of regulatable sensing technology via the integration of aptamer probe designs with advanced functional nanomaterials, allowing conditional control of ATP sensing and imaging with high spatial precision from subcellular organelles to living animals. Highlighting the recent advances in the design of photo-triggered nanosensors for spatiotemporally controlled ATP imaging, endogenously-triggered ATP sensing in a cell-selective manner, and spatially-controlled nanodevices for ATP imaging in specific organelles and extracellular microenvironments. Emphasis will be put on elucidating the principles of how nanotechnology can be applied to regulate the spatial precision of aptamer-based ATP sensing activities. The authors envision that this perspective provides insights into the engineering of aptamer-based nanobiotechnology for opening new frontiers in precise molecular sensing and other bio-applications.

Modular Weaving DNAzyme in Skeleton of DNA Nanocages for Photoactivatable Catalytic Activity Regulation

DNAzymes exhibit tremendous application potentials in the field of biosensing and gene regulation due to its unique catalytic function. However, spatiotemporally controlled regulation of DNAzyme activity remains a daunting challenge, which may cause nonspecific signal leakage or gene silencing of the catalytic systems. Here, we report a photochemical approach via modular weaving active DNAzyme into the skeleton of tetrahedral DNA nanocages (TDN) for light-triggered on-demand liberation of DNAzyme and thus conditional control of gene regulation activity. We demonstrate that the direct encoding of DNAzyme in TDN could improve the biostability of DNAzyme and ensure the delivery efficiency, comparing with the conventional surface anchoring strategy. Furthermore, the molecular weaving of the DNA nanostructures allows remote control of DNAzyme-mediated gene regulation with high spatiotemporal precision of light. In addition, we demonstrate that the approach is applicable for controlled regulation of the gene editing functions of other functional nucleic acids.

Circular Single-Stranded DNA: Discovery, Biological Effects, and Applications

The field of nucleic acid therapeutics has witnessed a significant surge in recent times, as evidenced by the increasing number of approved genetic drugs. However, current platform technologies containing plasmids, lipid nanoparticle-mRNAs, and adeno-associated virus vectors encounter various limitations and challenges. Thus, we are devoted to finding a novel nucleic acid vector and have directed our efforts toward investigating circular single-stranded DNA (CssDNA), an ancient form of nucleic acid. CssDNAs are ubiquitous, but generally ignored. Accumulating evidence suggests that CssDNAs possess exceptional properties as nucleic acid vectors, exhibiting great potential for clinical applications in genetic disorders, gene editing, and immune cell therapy. Here, we comprehensively review the discovery and biological effects of CssDNAs as well as their applications in the field of biomedical research for the first time. Undoubtedly, as an ancient form of DNA, CssDNA holds immense potential and promises novel insights for biomedical research.

Comprehensive fluorescence profiles of contamination-prone foods applied to the design of microcontact-printed in situ functional oligonucleotide sensors

With both foodborne illness and food spoilage detrimentally impacting human health and the economy, there is growing interest in the development of in situ sensors that offer real-time monitoring of food quality within enclosed food packages. While oligonucleotide-based fluorescent sensors have illustrated significant promise, the development of such on-food sensors requires consideration towards sensing-relevant fluorescence properties of target food products-information that has not yet been reported. To address this need, comprehensive fluorescence profiles for various contamination-prone food products are established in this study across several wavelengths and timepoints. The intensity of these food backgrounds is further contextualized to biomolecule-mediated sensing using overlaid fluorescent oligonucleotide arrays, which offer perspective towards the viability of distinct wavelengths and fluorophores for in situ food monitoring. Results show that biosensing in the Cyanine3 range is optimal for all tested foods, with the Cyanine5 range offering comparable performance with meat products specifically. Moreover, recognizing that mass fabrication of on-food sensors requires rapid and simple deposition of sensing agents onto packaging substrates, RNA-cleaving fluorescent nucleic acid probes are successfully deposited via microcontact printing for the first time. Direct incorporation onto food packaging yields cost-effective sensors with performance comparable to ones produced using conventional deposition strategies.

Smart Free-Standing Bilayer Polyacrylamide/DNA Hybrid Hydrogel Film-Based Sensing System Using Changes in Bending Angles as a Visual Signal Readout

Stimuli-responsive DNA hydrogels have shown great potential in sensing applications due to their attractive properties such as programmable target responsiveness, excellent biocompatibility, and biodegradability. In contrast to the extensively developed DNA hydrogel sensing systems based on the stimuli-responsive hydrogel-to-solution phase transition of the hydrogel matrix, the quantitative sensing application of DNA hydrogels exhibiting smart shape deformations has rarely been explored. Moreover, bulk DNA hydrogel-based sensing systems also suffer from high material cost and slow response. Herein, free-standing bilayer polyacrylamide/DNA hybrid hydrogel films with programmable responsive properties directed by the sequence of functional DNA units have been constructed. Compared with bulk DNA hydrogels, these DNA hydrogel films with a thickness at the micrometer scale not only greatly reduce the consumption of DNA materials but also facilitate the mass transfer of biomacromolecular substances within the hydrogel network, thus favoring their sensing applications. Therefore, a target-responsive smart DNA hydrogel film-based sensor system is further demonstrated based on the large amplitude macroscopic shape deformation of the film as a visual signal readout. As a proof of concept, Pb2+ or UO22+ ion-responsive DNA units were introduced into the active layer of the bilayer hydrogel films. In the presence of Pb2+ or UO22+ ions, the occurrence of a cleavage reaction within the DNA units leads to the release of DNA segments from the hydrogel film, inducing a dramatic shape deformation of the film, and thus sensing of Pb2+ or UO22+ ions with high specificity is achieved based on measuring the bending angle changes of these smart free-standing films. These smart DNA hydrogel film sensors with target-programmable responsiveness, simple operation, and ease of storage may hold promise for future rapid on-site testing applications.

Integration of Demethylation-Activated DNAzyme with a Single Quantum Dot Nanosensor for Sensitive Detection of O6-Methylguanine DNA Methyltransferase in Breast Tissues

O6-Methylguanine-DNA-methyltransferase (MGMT) is a demethylation protein that dynamically regulates the O6-methylguanine modification (O6 MeG), and dysregulated MGMT is implicated in various malignant tumors. Herein, we integrate demethylation-activated DNAzyme with a single quantum dot nanosensor to sensitively detect MGMT in breast tissues. The presence of MGMT induces the demethylation of the O6 MeG-caged DNAzyme and the restoration of catalytic activity. The activated DNAzyme then specifically cleaves the ribonucleic acid site of hairpin DNA to expose toehold sequences. The liberated toehold sequence may act as a primer to trigger a cyclic exponential amplification reaction for the generation of enormous signal strands that bind with the Cy5/biotin-labeled probes to form sandwich hybrids. The assembly of sandwich hybrids onto 605QD obtains 605QD-dsDNA-Cy5 nanostructures, inducing efficient FRET between the 605QD donor and Cy5 acceptor. Notably, the introduction of a mismatched base in hairpin DNA can greatly minimize the background and improve the signal-to-noise ratio. This nanosensor achieves a dynamic range of 1.0 × 10-8 to 0.1 ng/μL and a detection limit of 155.78 aM, and it can screen MGMT inhibitors and monitor cellular MGMT activity with single-cell sensitivity. Moreover, it can distinguish the MGMT level in tissues of breast cancer patients and healthy persons, holding great potential in clinical diagnostics and epigenetic research studies.

Rectifying artificial nanochannels with multiple interconvertible permeability states

Transmembrane channels play a vital role in regulating the permeation process, and have inspired recent development of biomimetic channels. Herein, we report a class of artificial biomimetic nanochannels based on DNAzyme-functionalized glass nanopipettes to realize delicate control of channel permeability, whereby the surface wettability and charge can be tuned by metal ions and DNAzyme-substrates, allowing reversible conversion between different permeability states. We demonstrate that the nanochannels can be reversibly switched between four different permeability states showing distinct permeability to various functional molecules. By embedding the artificial nanochannels into the plasma membrane of single living cells, we achieve selective transport of dye molecules across the cell membrane. Finally, we report on the advanced functions including gene silencing of miR-21 in single cancer cells and selective transport of Ca2+ into single PC-12 cells. In this work, we provide a versatile tool for the design of rectifying artificial nanochannels with on-demand functions.

Ligase-mediated synthesis of CuII-responsive allosteric DNAzyme with bifacial 5-carboxyuracil nucleobases

A CuII-responsive allosteric DNAzyme has been developed by introducing bifacial 5-carboxyuracil (caU) nucleobases, which form both hydrogen-bonded caU-A and metal-mediated caU-CuII-caU base pairs. The base sequence was logically designed based on a known RNA-cleaving DNAzyme so that the caU-modified DNAzyme (caU-DNAzyme) can form a catalytically inactive structure containing three caU-A base pairs and an active form with three caU-CuII-caU pairs. The caU-DNAzyme was synthesized by joining short caU-containing fragments with a standard DNA ligase. The activity of caU-DNAzyme was suppressed without CuII, but enhanced 21-fold with the addition of CuII. Furthermore, the DNAzyme activity was turned on and off during the reaction by the addition and removal of CuII ions. Both ligase-mediated synthesis and CuII-dependent allosteric regulation were achieved by the bifacial base pairing properties of caU. This study provides a new strategy for designing stimuli-responsive DNA molecular systems.

DNAzyme-Catalyzed Site-Specific N-Acylation of DNA Oligonucleotide Nucleobases

We used in vitro selection to identify DNAzymes that acylate the exocyclic nucleobase amines of cytidine, guanosine, and adenosine in DNA oligonucleotides. The acyl donor was the 2,3,5,6-tetrafluorophenyl ester (TFPE) of a 5'-carboxyl oligonucleotide. Yields are as high as >95 % in 6 h. Several of the N-acylation DNAzymes are catalytically active with RNA rather than DNA oligonucleotide substrates, and eight of nine DNAzymes for modifying C are site-specific (>95 %) for one particular substrate nucleotide. These findings expand the catalytic ability of DNA to include site-specific N-acylation of oligonucleotide nucleobases. Future efforts will investigate the DNA and RNA substrate sequence generality of DNAzymes for oligonucleotide nucleobase N-acylation, toward a universal approach for site-specific oligonucleotide modification.

Chemically Inducible DNAzyme Sensor for Controllable Imaging of Metal Ions

RNA-cleaving DNAzymes have emerged as a promising tool for metal ion detection. Achieving spatiotemporal control over their catalytic activity is essential for understanding the role of metal ions in various biological processes. While photochemical and endogenous stimuli-responsive approaches have shown potential for controlled metal ion imaging using DNAzymes, limitations such as photocytotoxicity, poor tissue penetration, or off-target activation have hindered their application for safe and precise detection of metal ions in vivo. We herein report a chemically inducible DNAzyme in which the catalytic core is modified to contain chemical caging groups at the selected backbone sites through systematic screening. This inducible DNAzyme exhibits minimal leakage of catalytic activity and can be reactivated by small molecule selenocysteines, which effectively remove the caging groups and restore the activity of DNAzyme. Benefiting from these findings, we designed a fluorogenic chemically inducible DNAzyme sensor for controlled imaging of metal ions with tunable activity and high selectivity in live cells and in vivo. This chemically inducible DNAzyme design expands the toolbox for controlling DNAzyme activity and can be easily adapted to detect other metal ions in vivo by changing the DNAzyme module, offering opportunities for precise biomedical diagnosis.

Metal-dependent activity control of a compact-sized 8-17 DNAzyme based on metal-mediated unnatural base pairing

A compact 8-17 DNAzyme was modified with a CuII-meditated artificial base pair to develop a metal-responsive allosteric DNAzyme. The base sequence was rationally designed based on the reported three-dimensional structure. The activity of the modified DNAzyme was enhanced 5.1-fold by the addition of one equivalent of CuII ions, showing good metal responsiveness. Since it has been challenging to modify compactly folded DNAzymes without losing their activity, this study demonstrates the utility of the metal-mediated artificial base pairing to create stimuli-responsive functional DNAs.

Current status and prospect of ZIF-based materials for breast cancer treatment

Breast cancer, one of the three most life-threatening cancers in modern times, must be explored for treatments with low side effects and practical efficacy. Metal organic framework materials (MOFs) is made by metal ions as the center for point and organic ligands as a bridge connecting a new type of porous nano-materials, among them, the zinc base zeolite imidazole skeleton material series (ZIFs) because of its excellent biocompatibility and pH slow controlled release ability, is widely used in the tumor microenvironment in basic research and achieved remarkable curative effect. Inspired by this, in this review, we focus on the recent research progress on the application of ZIFs in the treatment of breast cancer, mainly studying the structure of ZIFs such as ZIF-8, ZIF-90 and ZIF-67 and their application in novel therapies for breast cancer treatment, such as targeted drug delivery, photothermal therapy, immunotherapy and gene therapy.We will more fully demonstrate the potential of zif in breast cancer treatment, hoping to provide an avenue for exploring breast cancer treatment.

Discovering covalent inhibitors of protein-protein interactions from trillions of sulfur(VI) fluoride exchange-modified oligonucleotides

Molecules that covalently engage target proteins are widely used as activity-based probes and covalent drugs. The performance of these covalent inhibitors is, however, often compromised by the paradox of efficacy and risk, which demands a balance between reactivity and selectivity. The challenge is more evident when targeting protein-protein interactions owing to their low ligandability and undefined reactivity. Here we report sulfur(VI) fluoride exchange (SuFEx) in vitro selection, a general platform for high-throughput discovery of covalent inhibitors from trillions of SuFEx-modified oligonucleotides. With SuFEx in vitro selection, we identified covalent inhibitors that cross-link distinct residues of the SARS-CoV-2 spike protein at its protein-protein interaction interface with the human angiotensin-converting enzyme 2. A separate suite of covalent inhibitors was isolated for the human complement C5 protein. In both cases, we observed a clear disconnection between binding affinity and cross-linking reactivity, indicating that direct search for the aimed reactivity-as enabled by SuFEx in vitro selection-is vital for discovering covalent inhibitors of high selectivity and potency.

Biomimetic Construction of Degradable DNAzyme-Loaded Nanocapsules for Self-Sufficient Gene Therapy of Pulmonary Metastatic Breast Cancer

Pulmonary metastasis of breast cancer is the major cause of deaths of breast cancer patients, but the effective treatment of pulmonary metastases is still lacking at present. Herein, a degradable biomimetic DNAzyme biocapsule is developed with the poly(ethylenimine) (PEI)-DNAzyme complex encapsulated in a Mn2+/Zn2+-coordinated inositol hexaphosphate (IP6) capsule modified with the cRGD targeting peptide for high-efficiency gene therapy of both primary and pulmonary metastatic breast tumors. This DNAzyme biocapsule is degradable inside acidic lysosomes, leading to the release of DNAzyme and abundant Mn2+/Zn2+ for catalytic cleavage of EGR-1 mRNA. We find that PEI promotes the lysosomal escape of the released DNAzyme. Both in vitro and in vivo experiments demonstrate the apparent downregulation of EGR-1 and Bcl-2 protein expression after treatment with the DNAzyme biocapsule, thereby inducing apoptotic death of tumor cells. We further verify that the DNAzyme biocapsule exhibits potent therapeutic efficacy against both primary and pulmonary metastatic breast tumors with significant inhibition of peri-pulmonary metastasis. This study provides a promising effective strategy for constructing degradable DNAzyme-based platforms with self-supply of abundant metal ion cofactors for high-efficiency gene therapy of metastatic breast cancer.

Strategy of functional nucleic acids-mediated isothermal amplification for detection of foodborne microbial contaminants: A review

Foodborne microbial contamination (FMC) is the leading cause of food poisoning and foodborne illness. The foodborne microbial detection methods based on isothermal amplification have high sensitivity and short detection time, and functional nucleic acids (FNAs) could extend the detectable object of isothermal amplification to mycotoxins. Therefore, the strategy of FNAs-mediated isothermal amplification has been emergingly applied in biosensors for foodborne microbial contaminants detection, making biosensors more sensitive with lower cost and less dependent on nanomaterials for signal output. Here, the mechanism of six isothermal amplification technologies and their application in detecting FMC is firstly introduced. Then the strategy of FNAs-mediated isothermal amplification is systematically discussed from perspectives of FNAs' versatility including recognition elements (Aptamer, DNAzyme), programming tools (DNA tweezer, DNA walker and CRISPR-Cas) and signal units (G-quadruplex, FNAs-based nanomaterials). Finally, challenges and prospects are presented in terms of addressing the issue of nonspecific amplification reaction, developing better FNAs-based sensing elements and eliminating food matrix effects.

Tunable metal-organic frameworks assist in catalyzing DNAzymes with amplification platforms for biomedical applications

Various binding modes of tunable metal organic frameworks (MOFs) and functional DNAzymes (Dzs) synergistically catalyze the emergence of abundant functional nanoplatforms. Given their serial variability in formation, structural designability, and functional controllability, Dzs@MOFs tend to be excellent building blocks for the precise "intelligent" manufacture of functional materials. To present a clear outline of this new field, this review systematically summarizes the progress of Dz integration into MOFs (MOFs@Dzs) through different methods, including various surface infiltration, pore encapsulation, covalent binding, and biomimetic mineralization methods. Atomic-level and time-resolved catalytic mechanisms for biosensing and imaging are made possible by the complex interplay of the distinct molecular structure of Dzs@MOF, conformational flexibility, and dynamic regulation of metal ions. Exploiting the precision of DNAzymes, MOFs@Dzs constructed a combined nanotherapy platform to guide intracellular drug synthesis, photodynamic therapy, catalytic therapy, and immunotherapy to enhance gene therapy in different ways, solving the problems of intracellular delivery inefficiency and insufficient supply of cofactors. MOFs@Dzs nanostructures have become excellent candidates for biosensing, bioimaging, amplification delivery, and targeted cancer gene therapy while emphasizing major advancements and seminal endeavors in the fields of biosensing (nucleic acid, protein, enzyme activity, small molecules, and cancer cells), biological imaging, and targeted cancer gene delivery and gene therapy. Overall, based on the results demonstrated to date, we discuss the challenges that the emerging MOFs@Dzs might encounter in practical future applications and briefly look forward to their bright prospects in other fields.

An RNA-Cleaving DNAzyme That Requires an Organic Solvent to Function

Engineering functional nucleic acids that are active under unusual conditions will not only reveal their hidden abilities but also lay the groundwork for pursuing them for unique applications. Although many DNAzymes have been derived to catalyze diverse chemical reactions in aqueous solutions, no prior study has been set up to purposely derive DNAzymes that require an organic solvent to function. Herein, we utilized in vitro selection to isolate RNA-cleaving DNAzymes from a random-sequence DNA pool that were "compelled" to accept 35 % dimethyl sulfoxide (DMSO) as a cosolvent, via counter selection in a purely aqueous solution followed by positive selection in the same solution containing 35 % DMSO. This experiment led to the discovery of a new DNAzyme that requires 35 % DMSO for its catalytic activity and exhibits drastically reduced activity without DMSO. This DNAzyme also requires divalent metal ions for catalysis, and its activity is enhanced by monovalent ions. A minimized, more efficient DNAzyme was also derived. This work demonstrates that highly functional, organic solvent-dependent DNAzymes can be isolated from random-sequence DNA libraries via forced in vitro selection, thus expanding the capability and potential utility of catalytic DNA.

In Vitro Selection of M2+-Independent, Fast-Responding Acidic Deoxyribozymes for Bacterial Detection

We report on the first efforts to isolate acidic RNA-cleaving DNAzymes (aRCDs) from a random-sequence DNA pool by in vitro selection that are activated by a microbe Escherichia coli (E. coli), at pH 5.3. Importantly, these E. coli-responsive aRCDs only require monovalent metal ions as cofactors for cleaving a fluorogenic chimeric DNA/RNA substrate. Such characteristics can be used to efficiently protect RCDs from both intrinsic chemical instability and external enzymatic degradation. One remarkable DNAzyme, aRCD-EC1, is specific for E. coli, and its target is likely a protein. Furthermore, truncated aRCD-EC1 had significantly improved catalytic activity with an observed rate constant (kobs) of 1.18 min-1, making it the fastest bacteria-responding RCD reported to date. Clinical evaluation of this aRCD-based fluorescent assay using 40 patient urine samples demonstrated a diagnostic sensitivity of 100% and a specificity of 100% at a total analysis time of 50 min without a bacterial culture. This work can expand the repertoire of DNAzymes that are active under nonphysiological conditions, thus facilitating the development of diverse DNAzyme-based biosensors in clinical diagnosis.

Nucleic Acid Enzyme-Activated CRISPR-Cas12a With Circular CRISPR RNA for Biosensing

clustered regularly interspaced short palindromic repeats (CRISPR)-Cas systems are increasingly used in biosensor development. However, directly translating recognition events for non-nucleic acid targets by CRISPR into effective measurable signals represents an important ongoing challenge. Herein, it is hypothesized and confirmed that CRISPR RNAs (crRNAs) in a circular topology efficiently render Cas12a incapable of both site-specific double-stranded DNA cutting and nonspecific single-stranded DNA trans cleavage. Importantly, it is shown that nucleic acid enzymes (NAzymes) with RNA-cleaving activity can linearize the circular crRNAs, activating CRISPR-Cas12a functions. Using ligand-responsive ribozymes and DNAzymes as molecular recognition elements, it is demonstrated that target-triggered linearization of circular crRNAs offers great versatility for biosensing. This strategy is termed as "NAzyme-Activated CRISPR-Cas12a with Circular CRISPR RNA (NA3C)." Use of NA3C for clinical evaluation of urinary tract infections using an Escherichia coli-responsive RNA-cleaving DNAzyme to test 40 patient urine samples, providing a diagnostic sensitivity of 100% and specificity of 90%, is further demonstrated.

A promising nucleic acid therapy drug: DNAzymes and its delivery system

Based on the development of nucleic acid therapeutic drugs, DNAzymes obtained through in vitro selection technology in 1994 are gradually being sought. DNAzymes are single-stranded DNA molecules with catalytic function, which specifically cleave RNA under the action of metal ions. Various in vivo and in vitro models have recently demonstrated that DNAzymes can target related genes in cancer, cardiovascular disease, bacterial and viral infection, and central nervous system disease. Compared with other nucleic acid therapy drugs, DNAzymes have gained more attention due to their excellent cutting efficiency, high stability, and low cost. Here, We first briefly reviewed the development and characteristics of DNAzymes, then discussed disease-targeting inhibition model of DNAzymes, hoping to provide new insights and ways for disease treatment. Finally, DNAzymes were still subject to some restrictions in practical applications, including low cell uptake efficiency, nuclease degradation and interference from other biological matrices. We discussed the latest delivery strategy of DNAzymes, among which lipid nanoparticles have recently received widespread attention due to the successful delivery of the COVID-19 mRNA vaccine, which provides the possibility for the subsequent clinical application of DNAzymes. In addition, the future development of DNAzymes was prospected.

RNA-Cleaving DNAzyme-Based Amplification Strategies for Biosensing and Therapy

Since their first discovery in 1994, DNAzymes have been extensively applied in biosensing and therapy that act as recognition elements and signal generators with the outstanding properties of good stability, simple synthesis, and high sensitivity. One subset, RNA-cleaving DNAzymes, is widely employed for diverse applications, including as reporters capable of transmitting detectable signals. In this review, the recent advances of RNA-cleaving DNAzyme-based amplification strategies in scaled-up biosensing are focused, the application in diagnosis and disease treatment are also discussed. Two major types of RNA-cleaving DNAzyme-based amplification strategies are highlighted, namely direct response amplification strategies and combinational response amplification strategies. The direct response amplification strategies refer to those based on novel designed single-stranded DNAzyme, and the combinational response amplification strategies mainly include two-part assembled DNAzyme, cascade reactions, CHA/HCR/RCA, DNA walker, CRISPR-Cas12a and aptamer. Finally, the current status of DNAzymes, the challenges, and the prospects of DNAzyme-based biosensors are presented.

A Fluorogenic DNAzyme for A Thermally Stable Protein Biomarker from Fusobacterium nucleatum, a Human Bacterial Pathogen

Fusobacterium nucleatum has been correlated to many poor human conditions including oral infections, adverse pregnancies and cancer, and thus molecular tools capable of detecting this human pathogen can be used to develop diagnostic tests for them. Using a new selection method targeting thermally stable proteins without a counter-selection step, we derived an fluorogenic RNA-cleaving DNAzyme, named RFD-FN1, that can be activated by a thermally stable protein target that is unique to F. nucleatum subspecies. High thermal stability of protein targets is a very desirable attribute for DNAzyme-based biosensing directly with biological samples because nucleases found inherently in these samples can be heat-inactivated. We further demonstrate that RFD-FN1 can function as a fluorescent sensor in both human saliva and human stool samples. The discovery of RFD-FN1 paired with a highly thermal stable protein target presents opportunities for developing simpler diagnostic tests for this important pathogen.

Metal-mediated DNA strand displacement and molecular device operations based on base-pair switching of 5-hydroxyuracil nucleobases

Rational design of self-assembled DNA nanostructures has become one of the fastest-growing research areas in molecular science. Particular attention is focused on the development of dynamic DNA nanodevices whose configuration and function are regulated by specific chemical inputs. Herein, we demonstrate the concept of metal-mediated base-pair switching to induce inter- and intramolecular DNA strand displacement in a metal-responsive manner. The 5-hydroxyuracil (UOH) nucleobase is employed as a metal-responsive unit, forming both a hydrogen-bonded UOH-A base pair and a metal-mediated UOH-GdIII-UOH base pair. Metal-mediated strand displacement reactions are demonstrated under isothermal conditions based on the base-pair switching between UOH-A and UOH-GdIII-UOH. Furthermore, metal-responsive DNA tweezers and allosteric DNAzymes are developed as typical models for DNA nanodevices simply by incorporating UOH bases into the sequence. The metal-mediated base-pair switching will become a versatile strategy for constructing stimuli-responsive DNA nanostructures, expanding the scope of dynamic DNA nanotechnology.

DNAzyme Nanoconstruct-Integrated Autonomously-Adaptive Coatings Enhance Titanium-Implant Osteointegration by Cooperative Angiogenesis and Vessel Remodeling

Orthopedic implants have a high failure rate due to insufficient interfacial osseointegration, especially under osteoporotic conditions. Type H vessels are CD31+EMCN+ capillaries with crucial roles in mediating new bone formation, but their abundance in osteoporotic fracture site is highly limited. Herein, we report a nanoengineered composite coating to improve the in situ osseointegration of a Ti implant for osteoporotic fracture repair, which is realized through inhibiting the stimulator of interferon genes (STING) in endothelial cells (ECs) to stimulate type H vessel formation. Autonomously catalytic DNAzyme-ZnO nanoflowers (DNFzns) were prepared through rolling circle amplification (RCA) of STING mRNA-degrading DNAzymes, which were then integrated on the Ti surface and further sequentially complexed with thioketal-bridged polydopamine and naringenin (Ti/DNFzn/PDA-Nar). ECs and mesenchymal stem cells (MSCs) can be recruited to the implant surface by galvanotaxis, accounting for the negative charges of DNFzn/PDA-Nar, subsequently released Nar under reactive oxygen species (ROS) stimulation to upregulate endothelial nitric oxide synthase (eNOS) in recruited ECs, leading to enhanced local angiogenesis. Meanwhile, the coordinately released DNFzns would abolish STING expression in ECs to transform the newly formed vessels into Type H vessels, thus substantially promoting the osseointegration of Ti implants. This study provides application prospects for improving implant osteointegration for osteoporotic fracture treatment.

A Highly Selective Mn(II)-Specific DNAzyme and Its Application in Intracellular Sensing

Manganese is an essential trace element in the human body that acts as a cofactor in many enzymes and metabolisms. It is important to develop methods to detect Mn²⁺ in living cells. While fluorescent sensors have been very effective in detecting other metal ions, Mn²⁺-specific fluorescent sensors are rarely reported due to nonspecific fluorescence quenching by the paramagnetism of Mn²⁺ and poor selectivity against other metal ions such as Ca²⁺ and Mg²⁺. To address these issues, we herein report in vitro selection of an RNA-cleaving DNAzyme with exceptionally high selectivity for Mn²⁺. Through converting it into a fluorescent sensor using a catalytic beacon approach, Mn²⁺ sensing in immune cells and tumor cells has been achieved. The sensor is also used to monitor degradation of manganese-based nanomaterials such as MnOx in tumor cells. Therefore, this work provides an excellent tool to detect Mn²⁺ in biological systems and monitor the Mn²⁺-involved immune response and antitumor therapy.

Enzyme-Triggered DNA Sensor Technology for Spatially-Controlled, Cell-Selective Molecular Imaging

ConspectusWith unparalleled programmability, DNA has evolved as a powerful scaffold for engineering intricate and dynamic systems that can perform diverse tasks. By allowing serial detection of molecular targets in complex cellular milieus, increasingly sophisticated DNA sensors have not only promoted significant advances in unveiling the fundamental mechanisms of various pathophysiological processes but also provided a useful toolkit for disease diagnostics based on molecular signatures. Despite much progress, an inherent limitation of DNA-based sensors is that they often lack spatial control and cell-type selectivity for the sensing activity because of their "always active" design mechanism. Since most molecular targets of interests are not exclusive to disease cells, they are also shared by normal cells, the application of such biosensors for disease-specific imaging is limited by inadequate signal-to-background ratios due to indistinguishable signal response in both disease and normal cells. Therefore, imparting biosensors with spatial controllability remains a key issue to achieve molecular imaging with high sensitivity and cell specificity.As a biocatalyst, enzyme has been found to be closely related with the pathological conditions of numerous diseases. For example, many nucleases, protease, and kinases have been identified overexpressed in disease cells and considered as important biomarkers of cancer, inflammation, and neurological diseases. Recently, we have envisioned that such pathophysiology-associated enzymes could be leveraged as endogenous triggers to achieve spatial control over the molecular imaging activity of the DNA-based sensors with improved cell-specificity. In this Account, we outline the research efforts from our group on the development of endogenous enzyme-triggered, DNA-based sensor technology that enables spatially controlled, cell-type selective molecular imaging. With programmable DNA design and further engineering of enzymatically cleavable sites, a series of DNAzyme- and aptamer-based sensors have been developed for enzyme-controlled imaging of various molecular targets (e.g., metal ions and small molecules) in a cancer cell-selective manner. In particular, by introduction of PNA as bridge molecules to engineer DNA-based sensors with functional peptides, the conceptual design of protease-activated DNA biosensors has been established for spatioselective molecular imaging in cancer cells and extracellular tumor microenvironments. Furthermore, enzyme-triggered signal amplification approaches, such as enzymatically activated molecular beacon and catalytic hairpin assembly, have been developed for spatially selective RNA imaging in specific disease cells (e.g., inflammatory cells and cancer cells), which enables enhanced disease-site specificity and thus improved signal-to-background ratio. The signal amplification strategy is further expanded to cell-selective amplified imaging of non-RNA species through the combination with functional DNA design. Finally, the challenges and potential future directions in this burgeoning field are discussed. We hope this Account offers insights into rational design of enzymatically controlled, DNA-based sensor platforms for opening new frontiers in spatially resolved, cell-selective molecular imaging. We believe that the continuing advances in DNA-based molecular sensing technology together with the discoveries of diverse disease-associated enzymes will promise to usher a new era of diagnosis.

A Smart Metal-Polyphenol-DNAzyme nanoplatform for Gene-Chemodynamic Synergistic Tumor therapy

DNAzyme-based gene regulation shows great potential for the therapy of many cancers. However, ineffective delivery and insufficient cofactor supply pose challenges for potent gene therapy. In this study, we constructed a smart metal-polyphenol-DNAzyme nanoplatform (TA-Mn@Dz NPs) with intrinsic stability, effective delivery, and cofactor self-supply ability for gene-chemodynamic synergistic tumor therapy. Tannic acid, a plant-derived polyphenol, acts as an intermediate structural unit to mediate the assembly of Mn²⁺/DNAzyme and tumor acid environment-responsive nanocarriers. Intracellularly, the acidic environment triggers the decomposition of TA-Mn@Dz NPs to release DNAzyme and Mn²⁺. The Mn²⁺ ion not only boosts the catalytic cleavage of surviving mRNA for effective gene therapy but also activates chemodynamic therapy (CDT), generating highly toxic ·OH from endogenous H₂O₂. When tail intravenously injected into MCF-7 tumor-bearing mice, the TA-Mn@Dz NPs display desirable synergistic gene-chemodynamic antitumor effects, paving the way for developing DNAzyme-based multifunctional theranostic platforms for biomedical applications. STATEMENT OF SIGNIFICANCE: 1. A smart metal-polyphenol-DNAzyme nanoplatform was constructed for gene-chemodynamic synergistic tumor therapy. 2. Tannic acid act as intermediate structural units to mediate the assembly of Mn²⁺/DNAzyme and tumor acid environment-responsive nanocarriers. 3. The Mn²⁺-ion could not only boost the catalytic cleavage of surviving mRNA for effective gene therapy, but also catalyze endogenous H₂O₂ to form cytotoxic hydroxyl radicals for chemodynamic therapy. 4. Our work paves an extremely simple way to integrate gene therapy with CDT for the dual-catalytic tumor treatment.

Metal-Organic Frameworks Facilitate Nucleic Acids for Multimode Synergistic Therapy of Breast Cancer

Compared with traditional medical methods, gene therapy and photodynamic therapy are the new fields of cancer treatment, and they more accurately and effectively obtain preferable therapeutic effects. In this study, a chemotherapy drug-free nanotherapeutic system based on ZIF-90 encapsulated with Ce6-G3139 and Ce6-DNAzyme for gene and photodynamic therapies was constructed. Once entering the cancer cell, the therapy system will decompose and release Zn²⁺, Ce6-G3139, and Ce6-DNAzyme in the acidic environment. On the one hand, G3139 binds to the antiapoptotic gene BCL-2 in tumor cells and downregulates related proteins to inhibit tumor proliferation. On the other hand, Zn²⁺ produced by the decomposition of ZIF-90 can be used as a cofactor to activate the cleavage activity of DNAzyme to initiate gene therapy. Proliferation and metastasis of tumors were further inhibited by DNAzyme, targeting and cutting the gene of human early growth factor-1 (EGR-1). In addition, the photosensitizer Ce6 carried by the nucleic acid will produce cytotoxic ROS to kill cancer cells after irradiation. The results of this study demonstrated that the designed nanoplatform, which synergistically combines gene and photodynamic therapies, has shown great potential for cancer treatment.

A smart pathogen detector engineered from intracellular hydrogelation of DNA-decorated macrophages

Bacterial infection is a major threat to global public health, which urgently requires useful tools to rapidly analyze pathogens in the early stages of infection. Herein, we develop a smart macrophage (Mø)-based bacteria detector, which can recognize, capture, enrich and detect different bacteria and their secreted exotoxins. We transform the fragile native Møs into robust gelated cell particles (GMøs) using photo-activated crosslinking chemistry, which retains membrane integrity and recognition capacity for different microbes. Meanwhile, these GMøs equipped with magnetic nanoparticles and DNA sensing elements can not only respond to an external magnet for facile bacteria collection, but allow the detection of multiple types of bacteria in a single assay. Additionally, we design a propidium iodide-based staining assay to rapidly detect pathogen-associated exotoxins at ultralow concentrations. Overall, these nanoengineered cell particles have broad applicability in the analysis of bacteria, and could potentially be used for the management and diagnosis of infectious diseases.

Electrochemical DNAzyme-based biosensors for disease diagnosis

DNAzyme-based electrochemical biosensors provide exceptional analytical sensitivity and high target recognition specificity for disease diagnosis. This review provides a critical perspective on the fundamental and applied impact of incorporating DNAzymes in the field of electrochemical biosensing. Specifically, we highlight recent advances in creating DNAzyme-based electrochemical biosensors for diagnosing infectious diseases, cancer and regulatory diseases. We also develop an understanding of challenges around translating the research in the field of DNAzyme-based electrochemical biosensors from labs to clinics, followed by a discussion on different strategies that can be applied to enhance the performance of the currently existing technologies to create truly point-of-care electrochemical DNAzyme biosensors.

Chimeric Biocatalyst Combining Peptidic and Nucleic Acid Components Overcomes the Performance and Limitations of the Native Horseradish Peroxidase

Chimeric peptide-DNAzyme (CPDzyme) is a novel artificial peroxidase that relies on the covalent assembly of DNA, peptides, and an enzyme cofactor in a single scaffold. An accurate control of the assembly of these different partners allows for the design of the CPDzyme prototype G4-Hemin-KHRRH, found to be >2000-fold more active (in terms of conversion number k_cat) than the corresponding but non-covalent G4/Hemin complex and, more importantly, >1.5-fold more active than the corresponding native peroxidase (horseradish peroxidase) when considering a single catalytic center. This unique performance originates in a series of gradual improvements, thanks to an accurate selection and arrangement of the different components of the CPDzyme, in order to benefit from synergistic interactions between them. The optimized prototype G4-Hemin-KHRRH is efficient and robust as it can be used under a wide range of non-physiologically relevant conditions [organic solvents, high temperature (95 °C), and in a wide range of pH (from 2 to 10)], thus compensating for the shortcomings of the natural enzymes. Our approach thus opens broad prospects for the design of ever more efficient artificial enzymes.

Defining the substrate scope of DNAzyme catalysis for reductive amination with aliphatic amines

Amines can be alkylated using various reactions, such as reductive amination of aldehydes. In this study, we sought DNAzymes as catalytic DNA sequences that promote reductive amination with aliphatic amines, including DNA-anchored peptide substrates with lysine residues. By in vitro selection starting with either N₄₀ or N₂₀ random DNA pools, we identified many DNAzymes that catalyze reductive amination between the DNA oligonucleotide-anchored aliphatic amino group of DNA-C₃-NH₂ (C₃ = short three-carbon tether) and a DNA-anchored benzaldehyde group in the presence of NaCNBH₃ as reducing agent. At pH 5.2, 6.0, 7.5, or 9.0 in the presence of various divalent metal ion cofactors including Mg²⁺, Mn²⁺, Zn²⁺ and Ni²⁺, the DNAzymes have k_obs up to 0.12 h^-1 and up to 130-fold rate enhancement relative to the DNA-splinted but uncatalyzed background reaction. However, analogous selection experiments did not lead to any DNAzymes that function with DNA-HEG-NH₂ [HEG = long hexa(ethylene glycol) tether], or with short- and long-tethered DNA-AAAKAA and DNA-HEG-AAAKAA lysine-containing hexapeptide substrates (A = alanine, K = lysine). Including a variety of other amino acids in place of the neighboring alanines also did not lead to DNAzymes. These findings establish a practical limit on the substrate scope of DNAzyme catalysis for N-alkylation of aliphatic amines by reductive amination. The lack of DNAzymes for reductive amination with any substrate more structurally complex than DNA-C₃-NH₂ is likely related to the challenge in binding and spatially organizing those other substrates. Because other reactions such as aliphatic amine N-acylation are feasible for DNAzymes with DNA-anchored peptides, our findings show that the ability to identify DNAzymes depends strongly on both the investigated reaction and the composition of the substrate.

Endogenous Enzyme-Operated Spherical Nucleic Acids for Cell-Selective Protein Capture and Localization Regulation

Precise regulation of protein activity and localization in cancer cells is crucial to dissect the function of the protein-involved cellular network in tumorigenesis, but there is a lack of suitable methodology. Here we report the design of enzyme-operated spherical nucleic acids (E-SNAs) for manipulation of the nucleocytoplasmic translocation of proteins with cancer-cell selectivity. The E-SNAs are constructed by programmable engineering of aptamer-based modules bearing enzyme-responsive units in predesigned sites and further combination with SNA nanotechnology. We demonstrate that E-SNAs are able to regulate cytoplasmic-to-nuclear shuttling of RelA protein efficiently and specifically in tumor cells, while they remain inactive in normal cells due to insufficient enzyme expression. We further confirmed the generality of this strategy by investigating the enzyme-modulated inhibition/activation of thrombin activity by varying the aptamer-based design.

A fluorescent aptasensor for ATP based on functional DNAzyme/walker and terminal deoxynucleotidyl transferase-assisted formation of DNA-AgNCs

The development of sensitive adenosine triphosphate (ATP) sensors is imperative due to the tight relationship between the physiological conditions and ATP levels in vivo. Herein, a fluorescent aptasensor for ATP is presented, which adopts a strategy that combines a split aptamer and a DNAzyme/walker with terminal deoxynucleotidyl transferase (TDT)-assisted formation of DNA-AgNCs to realize fluorescence detection of ATP. A multifunctional oligonucleotide sequence is rationally designed, which integrates a split aptamer, a DNAzyme and a DNA walker. Both multifunctional oligonucleotide and its substrate strand are connected to the surface of Fe₃O₄@Au nanoparticles via Au-S bonds. The existence of ATP can induce the formation of the complete aptamer, and then activate the DNAzyme to circularly cleave the substrate strand, leaving 2',3'-cyclophosphate at the 3'end of the strand. This blocks the polymerization of dCTP to form poly(C) even in the presence of TDT and dCTP, due to the lack of free 3'-OH. In contrast, when ATP is absent, the DNAzyme/walker cannot work and then TDT catalyzes the formation of poly(C) at the free 3'-OH of the substrate strand, which is subsequently utilized as the template to prepare DNA-AgNCs. The fluorescence response derived from AgNCs thus reflects the ATP concentration. Under the optimum conditions, the aptasensor shows a linear response range from 5 nM to 10 000 nM, with a detection limit of 0.27 nM. The level of ATP in human serum can be effectively measured by the aptasensor with good recovery, indicating its application potential in medical samples.

Modular Engineering of DNAzyme-Based Sensors for Spatioselective Imaging of Metal Ions in Mitochondria

DNAzyme-based sensors remain at the forefront of metal-ion imaging efforts, but most lack the subcellular precision necessary to their applications in specific organelles. Here, we seek to overcome this limitation by presenting a DNAzyme-based biosensor technology for spatiotemporally controlled imaging of metal ions in mitochondria. A DNA nanodevice was constructed by integrating an optically activatable DNAzyme sensor and an upconversion nanoparticle with an organelle-targeting signal. We exemplify that this approach allows for mitochondria-specific imaging of Zn²⁺ in living cells in a near-infrared light-controlled manner. Based on this, the system is used for the monitoring of mitochondrial Zn²⁺ during drug treatment in a cellular model of ischemia insult. Furthermore, the DNA nanodevice is employed to assess dynamic Zn²⁺ change and pharmacological interventions in an injury cell model of Zn²⁺ toxicity. This method paves the way for engineering of DNAzyme sensors to investigate the pathophysiological roles of metal ions at the subcellular level.

CuII-mediated stabilisation of DNA duplexes bearing consecutive ethenoadenine lesions and its application to a metal-responsive DNAzyme

Metal-mediated nucleobase pairing can play a central role in the expression of metal-responsive DNA functions. We report the Cu^II-mediated stabilisation of DNA duplexes bearing damaged nucleobases, 1,N⁶-ethenoadenine (εA), as metal-binding sites, which was utilised to construct a metal-responsive DNAzyme. Consecutive incorporation of three or more εA-εA mismatch pairs allowed for Cu^II-dependent significant duplex stabilisation through metal-mediated εA-Cu^II-εA base pairing. Subsequently, a split DNAzyme with three εA-Cu^II-εA base pairs was strategically designed. The activity of the εA-modified DNAzyme was enhanced by 5.3-fold upon addition of Cu^II ions. This study demonstrates the utility of εA lesions for building metal-responsive DNA architectures.

Functional Zeolitic Imidazolate Framework for Robust l-Deoxyribozyme-Based Therapy

Programmable chiral biocatalysis represents a promising therapeutic strategy for its high stereospecific control over various biotransformations (e.g., chiral Aβ isomerization) of living entities yet is rarely explored. With an extraordinary resistance to nuclease digestion, the non-natural left-handed deoxyribozyme (l-DNAzyme) therapy is constrained by inefficient delivery/release and insufficient cofactors supply. Herein, an efficient adenosine triphosphate (ATP)-stimulated disassembly of l-histidine (l-His)-integrated ZIF-8 (l-His-ZIF-8) is reported for sustaining the l-DNAzyme-amplified photodynamic therapy. This self-sufficient l-therapeutic platform can intelligently release the l-DNAzyme probe and simultaneously supply l-His DNAzyme cofactors via endogenous ATP. Then, the intrinsic microRNA-21 catalyzes the generation of robust l-DNAzyme via the catalytic hybridization reaction for activating the photosensitizer with multiplied guaranteed therapeutic operation. This l-therapeutic strategy opens up great prospects for more precise diagnosis and customized gene silencing-based therapy.

A modular XNAzyme cleaves long, structured RNAs under physiological conditions and enables allele-specific gene silencing

Nucleic-acid catalysts (ribozymes, DNA- and XNAzymes) cleave target (m)RNAs with high specificity but have shown limited efficacy in clinical applications. Here we report on the in vitro evolution and engineering of a highly specific modular RNA endonuclease XNAzyme, FR6_1, composed of 2'-deoxy-2'-fluoro-β-D-arabino nucleic acid (FANA). FR6_1 overcomes the activity limitations of previous DNA- and XNAzymes and can be retargeted to cleave highly structured full-length (>5 kb) BRAF and KRAS mRNAs at physiological Mg2+ concentrations with allelic selectivity for tumour-associated (BRAF V600E and KRAS G12D) mutations. Phosphorothioate-FANA modification enhances FR6_1 biostability and enables rapid KRAS mRNA knockdown in cultured human adenocarcinoma cells with a G12D-allele-specific component provided by in vivo XNAzyme cleavage activity. These results provide a starting point for the development of improved gene-silencing agents based on FANA or other XNA chemistries.

On-site detection of fish furunculosis by combining DNAzyme and carboxyl-functionalized graphene

Furunculosis, which is caused by Aeromonas salmonicida, can induce septicemia, leading to the rapid death of fishes belonging to Salmonidae, Cyprinidae, and Fuscheridae, and lamprey. Targeting A. salmonicida, five DNAzyme sequences with the highest enrichment rates were selected through the Systematic Evolution of Ligands by Exponential Enrichment (SELEX). The enrichment rates were 34.78, 23.60, 8.91, 2.89, and 2.34%, respectively. The DNAzyme with the highest activity, named D-AS-2, showed specificity and sensitivity. D-AS-2 was combined with carboxyl-functionalized graphene to construct a biosensor, which showed good fluorescence response to scabies lesion samples. The diagnostic procedure was completed in <2 min and can be used for the on-site diagnosis of fish diseases. A low-cost, rapid, simple, and highly specific biosensor for the diagnosis of furunculosis was established based on DNAzyme and carboxyl-functionalized graphene.

Probing metal-dependent G-quadruplexes using the intrinsic fluorescence of DNA

K⁺ enhanced the intrinsic fluorescence of a series of G-quadruplex DNAs, while Pb²⁺ quenched the fluorescence. The metals showed interesting quadruplex binding kinetics with various DNA sequences.

The role of Na+ in catalysis by the 8-17 DNAzyme

The 8-17 DNAzyme is the most studied deoxyribozyme in terms of its molecular mechanism; hence it has become a model system to understand the basis behind DNA catalysis. New functional studies and the recent attainment of high-resolution X-ray structures, in addition to theoretical calculations have offered a great opportunity to gain a broader comprehension of its mechanism; however many aspects are unclear yet, especially regarding the precise role of metal ions in catalysis. Recently, molecular dynamics simulations have suggested for the first time a specific and dynamical participation of Na⁺ in the mechanism through the reaction pathway, besides the roles proposed for divalent metal cofactors. Herein, we present experimental evidence of a cooperative role of the monovalent cation Na⁺ in catalysis that is in line with these theoretical suggestions. Our findings show a clear influence of the concentration of Na⁺ on the activity of the 8-17 DNAzyme when Pb²⁺ is used as the cofactor. Interestingly, this effect is not noticed with Mg²⁺, indicating a particular contribution of the monovalent ion to catalysis that would operate preferentially with Pb²⁺. We have also found that Na⁺ affects the pK_a of the general base and the general acid, indicating its influence on general acid-base catalysis, already identified as part of the mechanism of the 8-17 DNAzyme. Finally, our results emphasize the need to consider Na⁺ carefully in the design and analysis of functional studies of catalytic DNAs and its possible specific role in their mechanisms.

Transcription Factor-Based Biosensors for Detecting Pathogens

Microorganisms are omnipresent and inseparable from our life. Many of them are beneficial to humans, while some are not. Importantly, foods and beverages are susceptible to microbial contamination, with their toxins causing illnesses and even death in some cases. Therefore, monitoring and detecting harmful microorganisms are critical to ensuring human health and safety. For several decades, many methods have been developed to detect and monitor microorganisms and their toxicants. Conventionally, nucleic acid analysis and antibody-based analysis were used to detect pathogens. Additionally, diverse chromatographic methods were employed to detect toxins based on their chemical and structural properties. However, conventional techniques have several disadvantages concerning analysis time, sensitivity, and expense. With the advances in biotechnology, new approaches to detect pathogens and toxins have been reported to compensate for the disadvantages of conventional analysis from different research fields, including electrochemistry, nanotechnology, and molecular biology. Among them, we focused on the recent studies of transcription factor (TF)-based biosensors to detect microorganisms and discuss their perspectives and applications. Additionally, the other biosensors for detecting microorganisms reported in recent studies were also introduced in this review.

Single bacteria detection by droplet DNAzyme-coupled rolling circle amplification

We described a new system termed droplet DNAzyme-coupled rolling circle amplification (dDRCA) that can selectively detect bacteria from clinical urine samples with single-cell sensitivity within 1.5 h compared with the several hours needed for traditionally used culture-based methods.