Near-Infrared Electrochemiluminescence Immunoassay with Biocompatible Au Nanoclusters as Tags

Highly Electroactive Co2+-Based Metal-Organic Frameworks as an Efficient Coreaction Accelerator for Amplifying Near-Infrared Electrochemiluminescence of Gold Nanoclusters in Biomarkers Immunoassay

Metal nanoclusters (NCs) as a new kind of luminophore have acquired sufficient interest, but their widespread application is restricted on account of their relatively low electrochemiluminescence (ECL) efficiency. Then, aqueous metal NCs with high ECL efficiency were strongly anticipated, especially for the ultrasensitive analysis of biomarkers. Herein, a near-infrared (NIR) ECL biosensing strategy for the test of neuron-specific enolase (NSE) was proposed by utilizing N-acetyl-l-cysteine (NAC)- and cysteamine (Cys)-stabilized gold NCs (NAC/Cys-AuNCs) as ECL emitters with the NIR ECL emission around 860 nm and a metal-organic framework/palladium nanocubes (ZIF-67/PdNCs) hybrid as the coreaction accelerator through their admirable electrocatalytic activity. The NIR emission would reduce photochemical injury to the samples and even realize nondestructive analysis with highly strong susceptibility and suitability. Furthermore, the utilization of ZIF-67/PdNCs could improve the ECL response of NAC/Cys-AuNCs by facilitating the oxidation of the coreactant triethylamine (TEA), leading to the production of a larger quantity of reducing intermediate radical TEA•+. Consequently, NAC/Cys-AuNCs with ZIF-67/PdNCs displayed 2.7 fold enhanced ECL emission compared with the single NAC/Cys-AuNCs using TEA as the coreactant. In addition, HWRGWVC (HWR), a heptapeptide, was introduced to immobilize antibodies for the specially binding Fc fragment of the antibodies, which improved the binding efficiency and sensitivity. As a result, a "signal-on" immunosensor for NSE analysis was obtained with an extensive linear range of 0.1 to 5 ng/mL and a low limit of detection (0.033 fg/mL) (S/N = 3). This study provides a wonderful method for the development of an efficient nondestructive immunoassay.

Co-Reactive Ligand In Situ Engineered Gold Nanoclusters with Ultra-Bright Near-Infrared Electrochemiluminescence for Ultrasensitive and Label-Free Detection of Carboxylesterase Activity

Ultrasensitive and accurate monitoring of carboxylesterase (CE) activity is extremely crucial for the early diagnosis of hepatocellular carcinoma (HCC), which is still a considerable challenge. Herein, using a co-reactive ligand engineering strategy, ultra-bright near-infrared (λmax = 830 nm) and self-enhanced electrochemiluminescence (ECL) Au nanoclusters (NCs) were in situ prepared with 2-(diethylamino) ethanethiol (DEAET) as a co-reactive ligand. Remarkably, the co-reactive ligand not only acts as a stabilizer like traditional ligands but also plays a crucial role as a co-reactant to ensure a confinement effect to shorten the charge transfer distance and increase the local concentration, significantly improving the collision efficiency between the electrogenerated free radicals. Consequently, the DEAET Au NCs exhibited a record and stable anodal ECL without the addition of an exogenous co-reactant, dramatically superior to classical Au NCs and Ru(bpy)32+ with a certain amount of the co-reactant. As a proof of concept, a convenient and label-free CE biosensor was innovatively constructed using 1-naphthyl acetate as a selective substrate, achieving ultrasensitive detection for CE activity with a low limit of detection of 9.1 × 10-7 U/L. Therefore, this work not only paves a co-reactive ligand engineering strategy for in situ preparation of high-efficiency metal NCs but also provides an ultrasensitive and convenient platform for the early diagnosis of HCC.

Functionalized nanomaterials-based electrochemiluminescent biosensors and their application in cancer biomarkers detection

To detect a range of trace biomarkers associated with human diseases, researchers have been focusing on developing biosensors that possess high sensitivity and specificity. Electrochemiluminescence (ECL) biosensors have emerged as a prominent research tool in recent years, owing to their potential superiority in low background signal, high sensitivity, straightforward instrumentation, and ease of operation. Functional nanomaterials (FNMs) exhibit distinct advantages in optimizing electrical conductivity, increasing reaction rate, and expanding specific surface area due to their small size effect, quantum size effect, and surface and interface effects, which can significantly improve the stability, reproducibility, and sensitivity of the biosensors. Thereby, various nanomaterials (NMs) with excellent properties have been developed to construct efficient ECL biosensors. This review provides a detailed summary and discussion of FNMs-based ECL biosensors and their applications in cancer biomarkers detection.

Copper nanoclusters electrochemiluminescence with tunable near-infrared emission wavelength for ultrasensitive detection of matrix metalloproteinase-2

Herein, the methionine (Met)/N-acetyl-L-cysteine (NAC) templated copper nanoclusters (Met/NAC-Cu NCs) with tunable near-infrared region (NIR) electrochemiluminescence (ECL) emission wavelength was firstly synthesized as emitter for the ultrasensitive detection of matrix metalloproteinase-2 (MMP-2). Significantly, the NAC played the role of template and reductant of cupric to acquire Cu NCs, and the surface defect regulator Met was used to connect NAC through -S-S- bond, which could heighten the surface defect of Cu NCs to continuously regulate the maximum ECL emission by successively controlling the molar ratio of Met and NAC, leading to the ECL emission wavelength of Cu NCs ranged from 680 nm to 750 nm. In addition, a rapid target triggered catalyst hairpin assembly (CHA) recycling amplification strategy was constructed through orderly and equidistantly arranging hairpin to increase its local concentration, resulting in greatly accelerated signal amplification efficiency and reaction rate. As a proof of concept, based on Met/NAC-Cu NCs as NIR ECL emitter and effective signal amplification tactic, a super-sensitive ECL biosensor was fabricated to detect target MMP-2 with the detection limit (LOD) as low as 1.65 fg/mL and successfully utilized for detecting of MMP-2 that from Hela and MCF-7 cancer cells. This research provided a wonderful avenue for regulating the optical performance of metal nanoclusters-based ECL emitters, and the developed neoteric NIR ECL emitter with the merits of less photochemical damage and deeper tissue penetration exhibited great potential in ultrasensitive biosensing and high-definition ECL imaging.

An electrochemiluminescence immunosensor based on multipath signal catalytic amplification integrated in a Cu2+-PEI-Pt/AuNC nanocomposite

Here, the nanocomposite Cu²⁺-PEI-Pt/AuNCs with multipath signal catalytic amplification for a peroxydisulfate-dissolved oxygen electrochemiluminescence (ECL) system was prepared to fabricate a sensitive ECL immunosensor. Using polyethyleneimine (PEI), a linear polymer, as the reductant and template, Pt/Au nanochains (Pt/AuNCs) were prepared. Abundant PEI would adsorb on the surface of Pt/AuNCs via Pt-N or Au-N bonds, and further coordinate with Cu²⁺ to give the final nanocomposite Cu²⁺-PEI-Pt/AuNCs which possessed multipath signal catalytic amplification for the ECL of the peroxydisulfate-dissolved oxygen system in the presence of H₂O₂. First, PEI, as an effective co-reactant, could directly enhance the ECL intensity. Second, Pt/AuNCs could not only act as a mimicking enzyme to promote the decomposition of H₂O₂ to produce more oxygen in situ, but also act as an effective co-reaction accelerator to facilitate the generation of more co-reactive intermediate groups from peroxydisulfate, resulting in an obviously enhanced ECL signal. Then, Cu²⁺ could also accelerate the decomposition of H₂O₂ to produce more oxygen in situ, leading to a further improvement of the ECL response. Using Cu²⁺-PEI-Pt/AuNCs as a loading platform, a sandwiched ECL immunosensor was fabricated. As a result, the obtained ECL immunosensor possessed an ultra-sensitive detection performance for α-1-fetoprotein, providing effective information on the diagnosis and treatment of related diseases.

Newly Developed Electrochemiluminescence Based on Bipolar Electrochemistry for Multiplex Biosensing Applications: A Consolidated Review

Recently, there has been an upsurge in the extent to which electrochemiluminescence (ECL) working in synergy with bipolar electrochemistry (BPE) is being applied in simple biosensing devices, especially in a clinical setup. The key objective of this particular write-up is to present a consolidated review of ECL-BPE, providing a three-dimensional perspective incorporating its strengths, weaknesses, limitations, and potential applications as a biosensing technique. The review encapsulates critical insights into the latest and novel developments in the field of ECL-BPE, including innovative electrode designs and newly developed, novel luminophores and co-reactants employed in ECL-BPE systems, along with challenges, such as optimization of the interelectrode distance, electrode miniaturization and electrode surface modification for enhancing sensitivity and selectivity. Moreover, this consolidated review will provide an overview of the latest, novel applications and advances made in this field with a bias toward multiplex biosensing based on the past five years of research. The studies reviewed herein, indicate that the technology is rapidly advancing at an outstanding purse and has an immense potential to revolutionize the general field of biosensing. This perspective aims to stimulate innovative ideas and inspire researchers alike to incorporate some elements of ECL-BPE into their studies, thereby steering this field into previously unexplored domains that may lead to unexpected, interesting discoveries. For instance, the application of ECL-BPE in other challenging and complex sample matrices such as hair for bioanalytical purposes is currently an unexplored area. Of great significance, a substantial fraction of the content in this review article is based on content from research articles published between the years 2018 and 2023.

Unique Electron-Transfer-Mediated Electrochemiluminescence of AuPt Bimetallic Nanoclusters and the Application in Cancer Immunoassay

Noble Metal nanoclusters (NCs) are promising electrochemiluminescence (ECL) emitters due to their amazing optical properties and excellent biocompatibility. They have been widely used in the detection of ions, pollutant molecules, biomolecules, etc. Herein, we found that glutathione-capped AuPt bimetallic NCs (GSH-AuPt NCs) emitted strong anodic ECL signals with triethylamine as co-reactants which had no fluorescence (FL) response. Due to the synergistic effect of bimetallic structures, the ECL signals of AuPt NCs were 6.8 and 94 times higher than those of monometallic Au and Pt NCs, respectively. The electric and optical properties of GSH-AuPt NCs differed from those of Au and Pt NCs completely. An electron-transfer mediated ECL mechanism was proposed. The excited electrons may be neutralized by Pt(II) in GSH-Pt and GSH-AuPt NCs, resulting in the vanished FL. Furthermore, abundant TEA radicals formed on the anode contributed electrons to the highest unoccupied molecular orbital of GSH-Au_2.5Pt NCs and Pt(II), booming intense ECL signals. Because of the ligand effect and ensemble effect, bimetallic AuPt NCs exhibited much stronger ECL than GSH-Au NCs. A sandwich-type immunoassay for alpha fetoprotein (AFP) cancer biomarkers was fabricated with GSH-AuPt NCs as signal tags, which displayed a wide linear range from 0.01 to 1000 ng·mL^-1 and a limit of detection (LOD) down to 1.0 pg·mL^-1 at 3S/N. Compared to previous ECL AFP immunoassays, this method not only had a wider linear range but also a lower LOD. The recoveries of AFP in human serum were around 108%, providing a wonderful strategy for fast, sensitive, and accurate cancer diagnosis.

Enhanced anode electrochemiluminescence in split aptamer sensor for kanamycin trace monitoring

Covalently modifying electrochemiluminescence (ECL) luminophores to alter their energy levels or generate energy/electron transfer processes for improved performance is hindered by the complex design and fabrication processes. In this study, non-covalent bond self-assembly was employed to enhance the ECL property of gold nanoclusters with tryptophan (Try) and mercaptopropionic acid (MPA) as ligands (Try-MPA-gold nanoclusters). Specifically, through the molecular recognition of Try by cucurbit[7]uril, some non-radiative transition channels of the charge carriers on the surface of the Try-MPA-gold nanoclusters were restricted, resulting in a significant enhancement of the ECL intensity of the nanoclusters. Furthermore, rigid macrocyclic molecules acted on the surface of the nanoclusters through self-assembly, forming a passive barrier that improved the physical stability of the nanoclusters in the water-phase and indirectly improved their luminescent stability. As an application, cucurbit[7]uril-treated Try-MPA-gold nanoclusters (cucurbit[7]uril@Try-MPA-gold nanoclusters) were used as signal probes, and Zn-doped SnO₂ nanoflowers (Zn-SnO₂ NFs) with high electron mobility were used as electrode modification material to establish an ECL sensor for kanamycin (KANA) detection, utilizing split aptamers as capture probes. The advanced split aptamer sensor demonstrated excellent sensitivity analysis for KANA in complex food substrates with a recovery rate of 96.2 to 106.0%.

Luminescent Gold Nanoclusters for Bioimaging: Increasing the Ligand Complexity

Fluorescence, and more in general, photoluminescence (PL), presents important advantages for imaging with respect to other diagnostic techniques. In particular, detection methodologies exploiting fluorescence imaging are fast and versatile; make use of low-cost and simple instrumentations; and are taking advantage of newly developed powerful, low-cost, light-based electronic devices, such as light sources and cameras, used in huge market applications, such as civil illumination, computers, and cellular phones. Besides the aforementioned simplicity, fluorescence imaging offers a spatial and temporal resolution that can hardly be achieved with alternative methods. However, the two main limitations of fluorescence imaging for bio-application are still (i) the biological tissue transparency and autofluorescence and (ii) the biocompatibility of the contrast agents. Luminescent gold nanoclusters (AuNCs), if properly designed, combine high biocompatibility with PL in the near-infrared region (NIR), where the biological tissues exhibit higher transparency and negligible autofluorescence. However, the stabilization of these AuNCs requires the use of specific ligands that also affect their PL properties. The nature of the ligand plays a fundamental role in the development and sequential application of PL AuNCs as probes for bioimaging. Considering the importance of this, in this review, the most relevant and recent papers on AuNCs-based bioimaging are presented and discussed highlighting the different functionalities achieved by increasing the complexity of the ligand structure.

Electrochemiluminescence nanoemitters for immunoassay of protein biomarkers

The family of electrochemiluminescent luminophores has witnessed quick development since the electrochemiluminescence (ECL) phenomenon of silicon nanoparticles was first reported in 2002. Moreover, these developed ECL nanoemitters have extensively been applied in sensitive detection of protein biomarker by combining with immunological recognition. This review firstly summarized the origin and development of various ECL nanoemitters including inorganic and organic nanomaterials, with an emphasis on metal-organic frameworks (MOFs)-based ECL nanoemitters. Several effective strategies to amplify the ECL response of nanoemitters and improve the sensitivity of immunosensing were discussed. The application of ECL nanoemitters in immunoassay of protein biomarkers for diagnosis of cancers and other diseases, especially lung cancer and heart diseases, was comprehensively presented. The recent development of ECL imaging with the nanoemitters as ECL tags for detection of multiplex protein biomarkers on single cell membrane also attracted attention. Finally, the future opportunities and challenges in the ECL biosensing field were highlighted.

Recent progress in assembly strategies of nanomaterials-based ultrasensitive electrochemiluminescence biosensors for food safety and disease diagnosis

The Electrochemiluminescence (ECL)-based biosensors have received considerable attention in food contaminants and disease diagnosis, due to their fascinating advantages such as low cost, fast analysis speed, wide linear range, high sensitivity, and excellent anti-interference ability. Meanwhile, with the vigorous development and improvement of nanotechnology, biosensor assembly strategies tend to diversify and be multifunctional. This review focuses on the representative ECL biosensors in food safety and disease diagnosis reported by our research group and other research groups based on nanomaterials assembly strategies in recent years. According to the different roles of nanomaterials played in the constitution of ECL biosensors, nanomaterials would be divided into the following two categories to be summarized: (1) Nanomaterials for signal amplification. (2) Nanomaterials as ECL emitters. Finally, this review prospects the perspectives on the future development direction of ECL biosensor in food safety and disease diagnosis.

Valence-State-Engineered Electrochemiluminescence from Au Nanoclusters

To determine the intrinsic effects of body elements on the electrochemiluminescence (ECL) of metal nanoclusters (NCs), herein, a valence-state engineering strategy is developed to adjust the NCs' ECL with bovine serum albumin (BSA)-stabilized AuNCs as a model, in which engineering the valence state of the Au body element, i.e., Au(0) and Au(I), is performed via successively reducing the precursor AuCl₄^- to Au(I) and Au(0) with BSA. The obtained BSA-AuNCs/N₂H₄ system leads to three anodic ECL processes at 0.37 (ECL-1), 0.85 (ECL-2), and 1.45 V (ECL-3). ECL-1 is generated from the BSA-Au(0) section of BSA-AuNCs in a surface-defect-involved route and is much stronger and red-shifted compared to ECL-2 and ECL-3, which are generated from the BSA-Au(I) section of BSA-AuNCs in the band-gap-engineered route. Each of the anodic ECL processes can be selectively generated and/or suppressed via adjusting the Au(I)/Au(0) ratio of BSA-AuNCs, tunable ECL generation route, and triggering potential, and the emission intensity and waveband of metal NCs are conveniently achieved in body-element-involved valence-state engineering.

Nanotechnology strategies for hepatocellular carcinoma diagnosis and treatment

Hepatocellular carcinoma (HCC) is a common malignancy threatening human health, and existing diagnostic and therapeutic techniques are facing great challenges. In the last decade or so, nanotechnology has been developed and improved for tumor diagnosis and treatment. For example, nano-intravenous injections have been approved for malignant perivascular epithelioid cell tumors. This article provides a comprehensive review of the applications of nanotechnology in HCC in recent years: (I) in radiological imaging, magnetic resonance imaging (MRI), fluorescence imaging (FMI) and multimodality imaging. (II) For diagnostic applications in HCC serum markers. (III) As embolic agents in transarterial chemoembolization (TACE) or directly as therapeutic drugs. (IV) For application in photothermal therapy and photodynamic therapy. (V) As carriers of chemotherapeutic drugs, targeted drugs, and natural plant drugs. (VI) For application in gene and immunotherapy. Compared with the traditional methods for diagnosis and treatment of HCC, nanoparticles have high sensitivity, reduce drug toxicity and have a long duration of action, and can also be combined with photothermal and photodynamic multimodal combination therapy. These summaries provide insights for the further development of nanotechnology applications in HCC.

Cluster-Dominated Electrochemiluminescence of Tertiary Amines in Polyethyleneimine Nanoparticles: Mechanism Insights and Sensing Application

Designing and screening highly efficient and cost-effective luminophores have always been a challenge to develop sensitive electrochemiluminescence (ECL) biosensors. Herein, polyethyleneimine nanoparticles (PEI NPs), a kind of nonconjugated polymer (NCP) NPs with tertiary amine clusters, were developed as an ECL luminophore. Specifically, PEI NPs were synthesized by a one-step hydrothermal method using PEI and formaldehyde. The properties of PEI NPs were investigated in detail using photochemical and electrochemical techniques. The results showed cluster-dominated luminescence of tertiary amines in PEI NPs via "through-space conjugation". This non-negligible ECL performance (at 631 nm) was also verified by the initiated reduction-oxidation process. With persulfate as a coreactant, PEI NPs acted as both the luminophore and coreaction accelerator to enhance the ECL intensity remarkably, which was eightfold higher than that of isolated PEI. Moreover, choosing dopamine as the model target, a highly sensitive "signal off" ternary ECL sensor was constructed utilizing PEI NPs as the luminophore. Dopamine could be oxidized to benzoquinone at the sensing interface, quenching the signal via ECL energy transfer. Free from any signal amplification, the proposed sensor achieved a low detection limit (4.3 nM) for target monitoring with good selectivity and stability. This strategy not only provides a unique perspective for designing novel efficient and facile ECL luminophores of tertiary amines but also broadens the biological application of NCP NPs.

Electrochemiluminescence Systems for the Detection of Biomarkers: Strategical and Technological Advances

Electrochemiluminescence (ECL)-based sensing systems rely on light emissions from luminophores, which are generated by high-energy electron transfer reactions between electrogenerated species on an electrode. ECL systems have been widely used in the detection and monitoring of diverse, disease-related biomarkers due to their high selectivity and fast response times, as well as their spatial and temporal control of luminance, high controllability, and a wide detection range. This review focuses on the recent strategic and technological advances in ECL-based biomarker detection systems. We introduce several sensing systems for medical applications that are classified according to the reactions that drive ECL signal emissions. We also provide recent examples of sensing strategies and technologies based on factors that enhance sensitivity and multiplexing abilities as well as simplify sensing procedures. This review also discusses the potential strategies and technologies for the development of ECL systems with an enhanced detection ability.

Low-Triggering-Potential Single-Color Electrochemiluminescence from Bovine Serum Albumin-Stabilized Unary Au Nanocrystals for Immunoassays

Herein, low-triggering-potential (LTP) electrochemiluminescence (ECL) with an onset around 0.0 V (vs Ag/AgCl) is proposed with bovine serum albumin (BSA)-stabilized Au nanocrystals (BSA-AuNCs) as a luminophore and hydrazine hydrate (N₂H₄) as a coreactant. The BSA-AuNCs/N₂H₄ system can exhibit efficient LTP-ECL around 0.37 V with the luminophore of both monodispersed and surface-confined states. The LTP-ECL of BSA-AuNCs/N₂H₄ is a kind of single-color emission with a maximum emission wavelength around 740 nm, which is obviously red-shifted for 80 nm from that of BSA-AuNCs PL, and indicates that the ECL is generated in a surface-defect-involved route instead of the band-gap-engineered route. Importantly, BSA-AuNCs can be utilized as ECL tags to perform sandwich-type immunoassays with acceptable sensitivity and selectivity, which exhibits a wide linear response for determining CA125 from 0.5 to 1000 mU/mL and a limit of detection of 0.05 mU/mL (S/N = 3).

Hemin-graphene oxide-gold nanoflower-assisted enhanced electrochemiluminescence immunosensor for determination of prostate-specific antigen

An ultrasensitive luminol electrochemiluminescence (ECL) immunosensor was constructed for the detection of prostate specific antigen (PSA) using glucose oxidase-decorated hemin-graphene oxide-gold nanoflowers ternary nanocomposites as probes. Graphene oxide was first modified with hemin and then with gold nanoflowers through an in situ growth method, which has significantly boosted the catalytic activity of this graphene oxide-based peroxidase mimetics. The biocatalytical activity of this ECL immunosensor was thoroughly investigated to achieve selective recognition of the analyte molecules (PSA) by specific binding between antigens and antibodies. The limit of detection was calculated to be 0.32 pg mL^-1 with a signal-to-noise ratio of 3. A broad linear range from 7.5 × 10^-4 to 2.5 ng mL^-1 was obtained. Such step-by-step assembled biosensor showed controlled nanostructure and exhibited promising application in analysis of human serum samples with a recovery range of 90.6-111.8% and a RSD range of 3.9-5.5%.

A General Route for Chemiluminescence of n-Type Au Nanocrystals

The photoluminescence, electroluminescence, and electrochemiluminescence from nanocrystals (NCs) have been extensively exploited for both fundamental and applied investigation over two decades, while the understanding of chemiluminescence (CL) from NCs is still far from clear by now. Herein, a general route for triggering CL from NC luminophore is proposed by extensively exploiting the charge transfer between n-type NCs and oxidants. Oxidants, such as K₂S₂O₈, H₂O₂, KMnO₄, and NaClO, can chemically inject the hole onto the valence band (VB) of methionine-capped n-type AuNCs (Met@AuNCs) and enable the occurrence of efficient radiative-charge-recombination between the chemically injected exogenous VB hole and the pre-existed endogenous conduction band (CB) electron, which eventually results in single-color and defect-involved CL with the maximum emission wavelength around 824 nm. The CL of Met@AuNCs/oxidant is qualified for ultrasensitive CL immunoassay in a similar procedure to the biotin-avidin and magnetic separation involved commercial CL immunoassay and exhibits acceptable performance for linearly determining carcinoembryonic antigen from 50 pg/mL to 100 ng/mL with a limit of detection of 10 pg/mL (S/N = 3). This strategy provides a general route to develop nanoparticulate CL luminophores and might eventually enable CL multiplexing assay via extensively exploiting the CL of different wavebands.

Recent progress of metal nanoclusters in electrochemiluminescence

Metal nanoclusters (MeNCs), composed of a few to hundreds of metal atoms and appropriate surface ligands, have attracted extensive interest in the electrochemiluminescence (ECL) realm owing to their molecule-like optical, electronic, and physicochemical attributes and are strongly anticipated for discrete energy levels, fascinating electrocatalytic activity, and good biocompatibility. Over the past decade, huge efforts have been devoted to the synthesis, properties, and application research of ECL-related MeNCs, and this field is still a subject of heightened concern. Therefore, this perspective aims to provide a comprehensive overview of the recent advances of MeNCs in the ECL domain, mainly covering the emerged ECL available MeNCs, unique chemical and optical properties, and the general ECL mechanisms. Synthesis strategies for desirable ECL performance are further highlighted, and the resulting ECL sensing applications utilizing MeNCs as luminophores, quenchers, and substrates are discussed systematically. Finally, we anticipate the future prospects and challenges in the development of this area.

Hollow Double-Shell CuCo2O4@Cu2O Heterostructures as a Highly Efficient Coreaction Accelerator for Amplifying NIR Electrochemiluminescence of Gold Nanoclusters in Immunoassay

The evolution of electrochemiluminescence (ECL) emission amplified by coreaction accelerator in near-infrared (NIR) area has been overwhelmingly anticipated for ultrasensitive detection of disease biomarkers. Herein, the hollow double-shell CuCo₂O₄@Cu₂O (HDS-CuCo₂O₄@Cu₂O) heterostructures were conveniently prepared and utilized as an attractive coreaction accelerator to improve the NIR ECL performance of gold nanoclusters (AuNCs) for the first time. Benefiting from perfect-matched lattice spacing, unique Cu₂O nanoparticles (NPs) were formed in situ on the layered-hollow CuCo₂O₄ nanospheres (NSs) to obtain HDS-CuCo₂O₄@Cu₂O heterostructures. The formed heterojunctions supplied shorter charge transfer distance and better interfacial charge transfer efficiency as well as more effective separation performance. Consequently, HDS-CuCo₂O₄@Cu₂O heterostructures as an admirable electroactive substrate could significantly promote the formation of sufficient coreactant intermediate radicals to react with AuNCs cationic radicals, realizing about 3-folds stronger NIR ECL response than that of individual AuNCs. In addition, the AuNCs templated by l-methionine (l-Met) exhibited NIR ECL emission around 830 nm, which could decrease the photochemical damage to even realize a nondestructive detection with improved susceptibility and circumambient adaptability. Subsequently, a well site-oriented fixation strategy utilizing HWRGWVC heptapeptide as the specific antibody immobilizer was introduced to further preserve the bioactivity of antibody on the HDS-CuCo₂O₄@Cu₂O and AuNCs surface along with enhancing the incubation performance markedly. In view of the progressive sensing mechanism, a NIR immunosensor was obtained for the ultrasensitive analysis of CYFRA21-1, which achieved a broad linear ranging from 2 fg/mL to 50 ng/mL and a low limit of detection (LOD) of 0.67 fg/mL (S/N = 3).

Near-Infrared Electrogenerated Chemiluminescence from Simple Copper Nanoclusters for Sensitive Alpha-Fetoprotein Sensing

Exploiting low cost, water-soluble, and near-infrared (NIR) emissive electrochemiluminophores (ECLphores) is significantly important for biological applications. In this study, bright and NIR electrogenerated chemiluminescence (ECL) emissive copper nanoclusters (Cu NCs) were synthesized through a facile one-pot wet chemical reduction method. ECL properties of obtained Cu NCs were examined in the presence of potassium persulfate, resulting in maximum intensity at 735 nm, at least 135 nm red-shifted with respect to all other Cu NCs. Electrochemistry, photoluminescence (PL), and spooling ECL spectroscopies were used to track NIR ECL emission of Cu NCs ascribed to the monomeric excited states. Due to the abundant binding sites of bovine serum albumin (BSA) to anchor target biomolecules, a sandwich-type ECL immunosensor was thus fabricated using such BSA-templated Cu NCs as tags and alpha fetoprotein antigen (AFP) as a model protein for the first time. Without assisting any signal amplification strategies, the proposed NIR ECL biosensor exhibited a wide linear range (1-400 ng mL^-1) and low detection limit (0.02 ng mL^-1) as well as superior selectivity and reproducibility and was successfully applied in real human serum sample determination. This work sets the stage for the development of novel non-noble metal nanoclusters for large-scale and emerging nanotechnology applications.

Cysteine Modification of Glutathione-Stabilized Au Nanoclusters to Red-Shift and Enhance the Electrochemiluminescence for Sensitive Bioanalysis

Screening new electrochemiluminescence (ECL) emitters for the design of sensitive detection strategies with even long emission wavelength is intensively anticipated in ECL evolution. Herein, a promising modification strategy for improving the ECL performance of Au nanoclusters (AuNCs) as a water-soluble luminophore was proposed. Upon the introduction of l-cysteine (l-Cys) onto the surface of glutathione (GSH)-stabilized AuNCs (GSH-AuNCs), the dual-thiol bond between l-Cys and GSH was formed to limit the intramolecular motion and nonradiative relaxation of the excited state from the capping agents, which resulted in the enhancement of monochromatic ECL emission of GSH-AuNCs with a red-shifted wavelength. By utilizing triethylamine as a coreactant, the ECL of l-Cys/GSH-AuNCs was about 1.5-fold stronger than that of GSH-AuNCs, and the emission wavelength red-shifted from 660 to 780 nm at a relatively low potential, which could decrease the interference in bioassay and the photochemical damage in nondestructive detection. As a proof of application, a sandwich-type immunosensing method for CYFRA 21-1 was proposed with l-Cys/GSH-AuNCs as the signal tag, which displayed a wide linear ranging from 0.2 fg/mL to 2 ng/mL and a limit of detection down to 0.067 fg/mL at 3S/N. This work provides a wonderful strategy for promoting the performance of ECL emitters.

Hydrogen Bond Organic Frameworks as a Novel Electrochemiluminescence Luminophore: Simple Synthesis and Ultrasensitive Biosensing

Nowadays, continuous efforts have been devoted to searching highly efficient electrochemiluminescence (ECL) emitters for applications in clinical diagnosis and food safety. In this work, triazinyl-based hydrogen bond organic frameworks (Tr-HOFs) were synthesized by N···H hydrogen bond self-assembly aggregation, where 6,6'-(1,4-phenylene)bis(1,3,5-triazine-2,4-diamine) (phenyDAT) was prepared via the cyclization reaction and behaved as a novel ligand. Impressively, the resulting Tr-HOFs showed strong ECL responses with highly enhanced ECL efficiency (21.3%) relative to the Ru(bpy)₃²⁺ standard, while phenyDAT hardly showed any ECL emission in aqueous phase. The Tr-HOFs innovatively worked as a new ECL luminophore to construct a label-free biosensor for assay of kanamycin (Kana). Specifically, the ECL response greatly weakened upon assembly of captured DNA with ferrocene (cDNA-Fc) onto the Tr-HOFs-modified electrode, while the ECL signals were adversely recovered by releasing linked DNA (L-DNA) from double-stranded DNA (dsDNA, hybridization of aptamer DNA (aptDNA) with L-DNA) due to the specific recognition of Kana with the aptDNA combined by the linkage of L-DNA and cDNA-Fc on the electrode. The as-built sensor showed a broadened linear range (1 nM-10 μM) and a limit of detection (LOD) down to 0.28 nM, which also displayed satisfactory results in the analysis of Kana in the milk and diluted human serum samples. This work offers a novel pathway to design an ECL emitter with organic molecules, holding great promise in biomedical analysis and food detection.

Coreactant-Free and Direct Electrochemiluminescence from Dual-Stabilizer-Capped InP/ZnS Nanocrystals: A New Route Involving n-Type Luminophore

Electrochemiluminescence (ECL) is conventionally generated in either an annihilation or a coreactant route, and the overwhelming majority of ECL research is conducted in the coreactant route via oxidizing or reducing the coexisting coreactant and luminophore. The coreacant-free ECL generated via merely oxidizing the luminophore would break through the ceiling of coreactant ECL via excluding the detrimental effects of exogenous coreactant and dissolved oxygen. Herein, by exploiting the rich-electron nature of n-type nanocrystals (NCs), coreacant-free ECL is achieved via merely oxidizing 3-mercaptopropionic acid (MPA) and mercaptosuccinic acid (MSA) capped InP/ZnS NCs, i.e., InP/ZnS_MPA-MSA. The electron-rich InP/ZnS_MPA-MSA can be electrochemically injected with holes via two oxidative processes at around +0.75 and +1.37 V (vs Ag/AgCl), respectively, and the exogenous hole can directly combine the conduction band (CB) electron of InP/ZnS_MPA-MSA, resulting in two coreactant-free ECL processes without employing any exogenous coreactant. The deprotonation process for the carboxyl group of the capping agents can provide a negatively charged surface to InP/ZnS_MPA-MSA and enhance the coreactant-free ECL. The hole-injecting process at +1.37 is much stronger than that at +0.75 V and eventually enables an ∼2000-fold enhanced ECL at +1.37 V than that at +0.75 V. The ECL at +1.37 V can be utilized for coreactant-free ECL immunoassay with prostate-specific antigen (PSA) as analyte, which exhibits an acceptable linear response from 5 pg·mL^-1 to 1 ng·mL^-1 with a limit of detection of 0.3 pg·mL^-1. The coreactant-free ECL route would provide an alternative to both annihilation and coreactant routes, simplify the ECL assay procedure and deepening the ECL mechanism investigations.

Ultrasensitive near-infrared aptasensor for enrofloxacin detection based on wavelength tunable AgBr nanocrystals electrochemiluminescence emission triggered by O-terminated Ti3C2 MXene

Toxic-free and easily accessible electrochemiluminescence (ECL) emitter/luminophore with near-infrared (NIR) emission is highly anticipated for ECL biosensor evolution. In this study, well-dispersed AgBr nanocrystals (NCs) decorated Ti₃C₂ MXene nanocomposites (Ti₃C₂-AgBrNCs) were prepared using a simple wet chemical technique and demonstrated highly efficient NIR ECL emission. For the first time, Ti₃C₂-AgBrNCs displayed wavelength-tunable ECL emission with varied Ti₃C₂ contents. Interestingly, further experimental data revealed that the ECL emission wavelength of Ti₃C₂-AgBrNCs red-shifted from 550 to 665 nm as Ti₃C₂ content increased, which can be attributed to the surface-defect effect generated by the oxygen-containing functional groups in Ti₃C₂ MXene. In particular, the ECL emission at 665 nm of Ti₃C₂-AgBrNCs nanocomposites not only revealed a 3.5 times increased ECL intensity but also a more stable ECL signal compared to pure AgBr NCs. As a proof of concept, a direct-type NIR ECL aptasensor with signal-on strategy was constructed with the Ti₃C₂-AgBrNCs nanocomposites as an ECL platform and enrofloxacin (ENR) as a model analyte. The NIR ECL aptasensor exhibited high sensitivity, a wide linear range from 1.0 × 10^-12 mol/L to 1.0 × 10^-6 mol/L and a low detection limit (5.97 × 10^-13 mol/L). This research offered a viable alternative way for producing toxic-free and efficient near-infrared ECL luminophores in bioanalysis and wavelength-tuning light-emitting devices.

Copper-Doped Terbium Luminescent Metal Organic Framework as an Emitter and a Co-reaction Promoter for Amplified Electrochemiluminescence Immunoassay

This work designed a signal amplification strategy for construction of a highly sensitive electrochemiluminescence (ECL) biosensor by doping Cu²⁺ in a terbium luminescent metal organic framework (Cu:Tb-MOF) to act as a co-reaction promoter, which enhanced the generation of SO₄^•- radical during the cathodic process in the presence of K₂S₂O₈ as a co-reactant. The porous and hollow morphology and the size of Cu:Tb-MOF could be efficiently tuned via changing the molar ratio of Cu²⁺ and Tb³⁺ and the reaction time, which were related to the specific surface area, pore diameter, and the ECL intensity of the MOF structure. To further improve the sensitivity of the ECL biosensor, H₂O₂ was introduced into the ECL system to act as another co-reaction promoter, leading to a new ECL mechanism involving dual co-reaction promoters. In view of the low electron transfer resistance of Cu:Tb-MOF, a label-free ECL immunosensor was conveniently constructed by co-immobilizing Cu:Tb-MOF and the capture antibody on the electrode surface. Using pro-gastrin-releasing peptide (ProGRP, a biomarker of small-cell lung cancer) as the model target, the proposed immunosensor exhibited excellent performance with a detection range of 1.0 pg·mL^-1 to 50 ng·mL^-1 and a limit of detection down to 0.68 pg·mL^-1 (3σ). This work demonstrated a strategy to use the MOF structures as both an emitter and a co-reaction promoter for amplified ECL emission and proposed an innovative route to extend the application of lanthanide MOFs.

Efficient Near-Infrared Electrochemiluminescence from Au18 Nanoclusters

Bright, near-infrared electrochemiluminescence (NIR-ECL) of Au₁₈ nanoclusters is reported herein. Spooling ECL and photoluminescence spectroscopy were used to track and link NIR emissions at 832 and 848 nm to three emissive species, Au₁₈ ⁰ *, Au₁₈ ¹⁺ * and Au₁₈ ²⁺ *, with a considerably high ECL efficiency of 5.5 relative to that of the gold standard Ru(bpy)₃ ²⁺ /TPrA (with 5-6 % reported ECL efficiency). The unprecedentedly high efficiency is due to the overlapped oxidation potentials of Au₁₈ ⁰ and tri-n-propylamine as co-reactant, the exposed facets of Au₁₈ ⁰ gold core, and electrocatalytic loops. These discoveries will add a new member to the efficient NIR-ECL gold nanoclusters family and bring more potential applications.

Analyzing Near-Infrared Electrochemiluminescence of Graphene Quantum Dots in Aqueous Media

Mechanisms of emissions, especially electrochemiluminescence (ECL), for graphene quantum dots (GQDs) are poorly understood, which makes near-infrared (NIR)-emitting GQDs difficult to create. To explore this poorly understood NIR ECL, two GQDs, nitrogen-doped GQDs (GQD-1) and nitrogen- and sulfur-doped ones (GQD-2), were prepared by a simple one-step solvothermal reaction with similar core structures but different surface states. The GQDs were analyzed by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy. Photoluminescence results, with a comparable quantum efficiency of 13% to strong luminophores in aqueous media, suggested a mechanism that the emission mainly depends on the core structure while slightly adjusted by the heteroatom doping. ECL of GQD-2 dispersed in aqueous media with K₂S₂O₈ as the coreactant was measured by means of ECL-voltage curves and ECL spectroscopy, demonstrating strong NIR emissions between 680 and 870 nm, with a high ECL efficiency of 13% relative to that of the Ru(bpy)₃²⁺/K₂S₂O₈ system. Interestingly, ECL is generated by surface excited states emitting light at a much longer wavelength in the NIR region. The easily prepared GQD-2 has several advantages such as low cost and quite strong NIR-ECL in aqueous media, with which wide applications in biodetection are anticipated.

High-Efficient Electrochemiluminescence of Au Nanoclusters Induced by the Electrosensitizer Cu2O: The Mechanism Insights from the Electrogenerated Process

Herein, a novel Au nanoclusters/Cu₂O (Au NCs/Cu₂O) heterostructure exhibited exceptionally strong electrochemiluminescence (ECL) emission, in which the p-type semiconductor Cu₂O was defined as the electrosensitizer to provide the electrogenerated holes for rapidly transferring the electrogenerated hot electrons of Au NCs. Thus, the fast charge transfer of Au NCs/Cu₂O was achieved by the electrosensitizer compared to the sluggish one via intramolecular covalent bond charge transfer of traditional Au NCs, resulting in a greatly higher ECL efficiency (63.8%) than that of pure Au NCs (2.7%) versus the standard [Ru(bpy)₃]²⁺. It solved one main challenge of electrochemiluminophore-based metal NCs: high efficiency with energic charge-transport kinetics. As a proof of concept, Au NCs/Cu₂O was successfully employed in an ultrasensitive ECL biosensing platform for determining the biological antioxidant glutathione with a limit of detection (LOD) as low as 6.3 pM. The heterostructure as an ECL emitter is a very promising start for guiding the rational design of efficient electrochemiluminophores in intense light-emitting devices and high-definition ECL imaging.

Lowly-aggregated perylene diimide as a near-infrared electrochemiluminescence luminophore for ultrasensitive immunosensors at low potentials

In the electrochemiluminescence (ECL) field, most reported luminophores were focused on high-triggering potential and short wavelength, which was adverse for the ECL theory study and application at low potentials. Perylene diimide derivatives could emit near-infrared (NIR) ECL at low-triggering potential; however, they are always highly aggregated into a microrod structure and stacked together, which largely limited their application in biological fields such as bio-sensing and bio-imaging. To overcome these obstacles, we designed a novel perylene diimide molecule, namely N,N'-dicaproate sodium-3,4,9,10-perylenedicarboximide (PDI-COONa). This molecule self-assembled into a two-dimensional network nanostructure, which largely decreased the aggregation degree of PDI molecules and provided solid bases for designing lowly-aggregated PDI molecules. Also, the formed nanoluminophore produced strong emission at -0.26 V with an NIR wavelength 700 nm, which should be due to the excited J-type PDI-COO^- dimers. Moreover, this network nanoluminophore well-dispersed on graphene oxide (GO) as an ECL nanomaterial to label secondary antibodies and fabricate a sandwiched immunosensor for alpha-fetoprotein (AFP) detection between 0 and -0.6 V. This immunosensor showed a wider linear response for AFP ranging from 0.1 fg mL^-1 to 1 μg mL^-1 with a low detection limit 0.0353 fg mL^-1 compared with other immunosensors based on PDI microrod-modified GO ECL materials. The fabricated immunosensor also showed good feasibility in human serum samples.

Microfluidic Magnetic Analyte Delivery Technique for Separation, Enrichment, and Fluorescence Detection of Ultratrace Biomarkers

A microfluidic magnetic analyte delivery (μMAD) technique was developed to realize sample preparation and ultrasensitive biomarker detection. A simply designed microfluidic device was employed to carry out this technique, including a poly(dimethylsiloxane)-glass hybrid microchip having four straight rectangular channels and a permanent magnet. In the μMAD process, functionalized magnetic beads (MBs) were used to recognize and isolate analytes from a complex sample matrix, deliver analytes into tiny microchannels, and preconcentrate analytes in the magnetic trapping/detection region for in situ fluorescence detection. In the feasibility study and sensitivity optimization, horseradish peroxidase-labeled MBs were used, and critical parameters for the signal amplification performance of μMAD were carefully evaluated. At optimized conditions, a sensitivity improvement of at least 2 orders of magnitude was achieved. As a proof of concept, μMAD was combined with the enzyme-linked immunosorbent assay (ELISA), while carcinoembryonic antigen (CEA), prostate-specific antigen (PSA), and interleukin 6 (IL-6) were selected as model biomarkers. The limits of detection (LODs) of μMAD-ELISA were as low as 0.29 pg/mL for CEA, 0.047 pg/mL for PSA, and 0.021 pg/mL for IL-6, which corresponded to an over 200-fold reduction compared to their commercial ELISA results. Meanwhile, μMAD-ELISA revealed high selectivity and reproducibility. In clinical sample analysis, good accuracy was acquired for human serum analysis relative to commercial ELISA kits, and satisfied recoveries of 85.1-102% with RSDs of 1.7-9.8% for IL-6 and 84.7-113% with RSDs of 3.2-8.3% for interferon-γ were obtained. This ultrasensitive and easy operation technique provides a valuable approach for trace-level biomarker detection for practical applications.

Free-standing electrochemical biosensor for carcinoembryonic antigen detection based on highly stable and flexible conducting polypyrrole nanocomposite

A flexible free-standing electrochemical biosensor to detect carcinoembryonic antigen (CEA) is described based on a conducting polypyrrole (PPy) nanocomposite film electrode. The conducting PPy composite was constructed by the sandwiched structure formed by PPy doped with pentaerythritol ethoxylate (PEE) and 2-naphthalene sulfonate (2-NS-PPy) separately via electropolymerization. Gold nanoparticles (AuNPs) were fixed on the PPy composite film by electrodeposition and then connected to CEA aptamer through self-assembly to construct a free-standing electrochemical biosensor breaking away from additional soft substrates and current collector. This PPy composite film-based electrochemical biosensor exhibits satisfying sensing performance for CEA detection, with a linear range from 10^-10 g/mL to 10^-6 g/mL and a detection limit of 0.033 ng/mL, good specificity and long-term sensing stability (96.8% of the original signal after 15 days). The biosensor also presents acceptable reproducibility with 1.7% relative standard deviation. Moreover, this electrochemical biosensor owns the deformation stability that could bear various deformations (twisting, folding, and knotting) without affecting device's sensing performance. It can even maintain 99.4% of the original signal under 25% strain deformation. Due to the superior sensing performance, high stability (mechanical deformation and long-term storage), and flexibility, this free-standing electrochemical biosensor proves huge potential in application of flexible and wearable electronics.

Regulating Valence States of Gold Nanocluster as a New Strategy for the Ultrasensitive Electrochemiluminescence Detection of Kanamycin

Monitoring of kanamycin residue has attracted considerable attention owing to the potential harm caused by the abuse of kanamycin. However, the detection of kanamycin has been limited owing to its electrochemical and optical inertness. Herein, we report a facile and highly efficient electrochemiluminescence (ECL) strategy for the detection of kanamycin based on the valence state effect of gold nanocluster (AuNC) probes. It is proven that Au⁰ in chemically reduced AuNCs (CR-AuNCs) could be oxidized to Au^I via the redox reaction between kanamycin and CR-AuNCs in the presence of H₂O₂, resulting in ECL quenching due to the valence state change of CR-AuNCs. Because the ECL of the AuNC probes is sensitively affected by the valence state, excellent sensitivity for kanamycin was achieved without any signal amplification operation and aptamers. A preferable linear-dependent curve was acquired in the detection range from 1.0 × 10^-11 to 3.3 × 10^-5 M with an extremely low detection limit of 1.5 × 10^-12 M. The proposed kanamycin sensing platform is very simple and shows high selectivity and an extremely broad linear range detection of kanamycin. Furthermore, the proposed sensing platform can detect kanamycin in milk samples with excellent recoveries. Therefore, this sensing strategy provides an effective and facile way to detect kanamycin and can help promote the understanding of the constructed mechanism of the AuNC-based ECL system, thus greatly broadening its potential application in ECL fields.

A potential-resolved electrochemiluminescence resonance energy transfer strategy for the simultaneous detection of neuron-specific enolase and the cytokeratin 19 fragment

An electrochemiluminescence resonance energy transfer (ECL-RET) immunosensor was developed based on the potential-resolved technology for the simultaneous detection of neuron-specific enolase (NSE) and the cytokeratin 19 fragment (CYFRA21-1). The absorption spectrum of gold nanorods (AuNRs) perfectly overlapped with the ECL spectra of SnS2@Pt and Ru(bpy)32+/Zn-MOF, so they exhibited an excellent ECL-RET effect with high efficiency. Zn-MOF possesses a large surface area, which allows for the loading of Ru(bpy)32+. This results in a signal probe of Ru(bpy)32+/Zn-MOF/Ab1 showing a strong ECL emission. Simultaneously, owing to the excellent electronic conductivity of PtNPs, they can increase the electron transfer rate between S2O82- and tin disulfide nanoflowers (SnS2NFs). Hence, the ECL signal of SnS2NFs can be enhanced. Under the optimal conditions, the linear range for NSE is 0.2 pg mL-1-20 ng mL-1 with a detection limit of 79 fg mL-1. The linear range for CYFRA21-1 is 1.25 pg mL-1-12.5 ng mL-1 with a detection limit of 0.43 pg mL-1. The proposed immunosensor can be used for the sensitive simultaneous detection of NSE and CYFRA21-1 in human serum and has promise for clinical diagnostics.

Enhanced Near-Infrared Electrochemiluminescence from Trinary Ag-In-S to Multinary Ag-Ga-In-S Nanocrystals via Doping-in-Growth and Its Immunosensing Applications

Screening toxic-element-free and biocompatible electrochemiluminophores was crucial for electrochemiluminescence (ECL) evolution. Herein, l-glutathione (GSH)-capped Ag-Ga-In-S (AGIS) nanocrystals (NCs) were prepared by doping Ag-In-S (AIS) NCs in a doping-in-growth way and utilized as a model for both ECL modulating and developing multinary NC-based electrochemiluminophores with enhanced ECL performance than trinary NCs. AGIS NCs not only primarily preserved the morphology, size, phase structure, and water monodisperse characteristics of AIS NCs with broadened band gap but also demonstrated obviously enhanced oxidative-reduction ECL than AIS NCs. Importantly, ECL of AGIS NCs was located at the near-infrared region with a maximum emission wavelength of 744 nm and could be utilized for an ECL immunoassay with human prostate-specific antigen (PSA) as a model, which exhibited a linearity range from 0.05 pg/mL to 1.0 ng/mL and a low limit of detection of 0.01 pg/mL (S/N = 3). This work provided a promising alternative to the traditional binary NCs for developing toxic-element-free and biocompatible electrochemiluminophores with efficient near-infrared ECL.

Progress in electrochemiluminescence of nanoclusters: how to improve the quantum yield of nanoclusters

Classification of nanoclusters and methods to improve their quantum yield and applications.