“Sample-to-Answer” Detection of Rare ctDNA Mutation from 2 mL Plasma with a Fully Integrated DNA Extraction and Digital Droplet PCR Microdevice for Liquid Biopsy

Multi-scenario surveillance of respiratory viruses in aerosols with sub-single-copy spatial resolution

Highly sensitive airborne virus monitoring is critical for preventing and containing epidemics. However, the detection of airborne viruses at ultra-low concentrations remains challenging due to the lack of ultra-sensitive methods and easy-to-deployment equipment. Here, we present an integrated microfluidic cartridge that can accurately detect SARS-COV-2, Influenza A, B, and respiratory syncytial virus with a sensitivity of 10 copies/mL. When integrated with a high-flow aerosol sampler, our microdevice can achieve a sub-single-copy spatial resolution of 0.83 copies/m3 for airborne virus surveillance with an air flow rate of 400 L/min and a sampling time of 30 minutes. We then designed a series of virus-in-aerosols monitoring systems (RIAMs), including versions of a multi-site sampling RIAMs (M-RIAMs), a stationary real-time RIAMs (S-RIAMs), and a roaming real-time RIAMs (R-RIAMs) for different application scenarios. Using M-RIAMs, we performed a comprehensive evaluation of 210 environmental samples from COVID-19 patient wards, including 30 aerosol samples. The highest positive detection rate of aerosol samples (60%) proved the aerosol-based SARS-CoV-2 monitoring represents an effective method for spatial risk assessment. The detection of 78 aerosol samples in real-world settings via S-RIAMs confirmed its reliability for ultra-sensitive and continuous airborne virus monitoring. Therefore, RIAMs shows the potential as an effective solution for mitigating the risk of airborne virus transmission.

Needle-Plug/Piston-Based Modular Mesoscopic Design Paradigm Coupled With Microfluidic Device for Point-of-Care Pooled Testing

Emerging diagnostic scenarios, such as population surveillance by pooled testing and on-site rapid diagnosis, highlight the importance of advanced microfluidic systems for in vitro diagnostics. However, the widespread adoption of microfluidic technology faces challenges due to the lack of standardized design paradigms, posing difficulties in managing macro-micro fluidic interfaces, reagent storage, and complex macrofluidic operations. This paper introduces a novel modular-based mesoscopic design paradigm, featuring a core "needle-plug/piston" structure with versatile variants for complex fluidic operations. These structures can be easily coupled with various microfluidic platforms to achieve truly self-contained microsystems. Incorporated into a "3D extensible" design architecture, the mesoscopic design meets the demands of function integration, macrofluid manipulations, and flexible throughputs for point-of-care nucleic acid testing. Using this approach, an ultra-sensitive nucleic acid detection system is developed with a limit of detection of ten copies of SARS-CoV-2 per mL. This system efficiently conducts large-scale pooled testing from 50 pharyngeal swabs in a tube with an uncompromised sensitivity, enabling a truly "sample-in-answer-out" microsystem with exceptional performance.

CRISPR/Cas12a cleavage triggered nanoflower for fluorescence-free and target amplification-free biosensing of ctDNA in the terahertz frequencies

The detection of tumor biomarkers in liquid biopsies requires high sensitivity and low-cost biosensing strategies. However, few traditional techniques can satisfy the requirements of target amplification-free and fluorescence-free at the same time. In this study, we have proposed a novel strategy for ctDNA detection with the combination of terahertz spectroscopy and the CRISPR/Cas12 system. The CRISPR/Cas12a system is activated by the target ctDNA, resulting in a series of reactions leading to the formation of an Au-Fe complex. This complex is easily extracted with magnets and when dropped onto the terahertz metamaterial sensor, it can enhance the frequency shift, providing sensitive and selective sensing of the target ctDNA. Results show that the proposed terahertz biosensor exhibits a relatively low detection limit of 0.8 fM and a good selectivity over interference species. This detection limit is improved by three orders of magnitude compared with traditional biosensing methods using terahertz waves. Furthermore, a ctDNA concentration of 100 fM has been successfully detected in bovine serum (corresponding to 50 fM in the final reaction system) without amplification.

Rapid Detection of Uropathogens Using an Integrated Multiplex Digital Nucleic Acid Detection Assay Powered by a Digital-to-Droplet Microfluidic Device

The digital nucleic acid detection assay features the capability of absolute quantitation without the need for calibration, thereby facilitating the rapid identification of pathogens. Although several integrated digital nucleic acid detection techniques have been developed, there are still constraints in terms of automation and analysis throughput. To tackle these challenges, this study presents a digital-to-droplet microfluidic device comprising a digital microfluidics (DMF) module at the bottom and a droplet microfluidics module at the top. Following sample introduction, the extraction of nucleic acid and the dispensation of nucleic acid elution for mixing with the multiple amplification reagents are carried out in the DMF module. Subsequently, the reaction droplets are transported to the sample inlet of the droplet microfluidic module via a liquid outlet, and then droplet generation in four parallel units within the droplet microfluidics module is actuated by negative pressure generated by a syringe vacuum. The digital-to-droplet microfluidic device was employed to execute an integrated multiplex digital droplet nucleic acid detection assay (imDDNA) incorporating loop-mediated isothermal amplification (LAMP). This assay was specifically designed to enable simultaneous detection of four uropathogens, namely, Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae, and Enterococcus faecalis. The entire process of the imDDNA is completed within 75 min, with a detection range spanning 5 orders of magnitude (9.43 × 10-2.86 × 104 copies μL-1). The imDDNA was employed for the detection of batched clinical specimens, showing a consistency of 91.1% when compared with that of the conventional method. The imDDNA exhibits simplicity in operation and accuracy in quantification, thus offering potential advantages in achieving rapid pathogen detection.

Tweezer PCR: A Highly Specific Method for Accurate Identification of Low-Abundance Mutations

Somatic mutation is a valuable biomarker for tracking tumor progression and migration due to its distinctive feature in various tumors and its wide distribution throughout body fluids. However, accurately detecting somatic mutations from the abundant DNA of noncancerous origins remains a practical challenge in the clinic. Herein, we developed an ultraspecific method, called tweezer PCR, for detecting low-abundance mutations inspired by the design of DNA origami. The high specificity of tweezer PCR relies on a tweezer-shaped primer containing six basic functional units: a primer, a hairpin, a linker, a blocker, a spacer, and a toehold. After optimizing the structure of the tweezer-shaped primer and enhancing its specificity by adding additional Mg2+ and Na+, tweezer PCR distinguished as low as 20 copies of mutations from 2 million copies of wild-type templates per test. By testing synthesized plasmids and plasma samples gathered from nonsmall-cell lung cancer patients, tweezer PCR showed higher specificity and robustness for detecting low-copy-number mutations in contrast with digital droplet PCR. Additionally, the need for conventional instruments makes tweezer PCR a practically accessible method for testing low-abundance mutations. Because of its numerous advantages, we believe that tweezer PCR offers a precise, robust, and pragmatic tool for cancer screening, prognosis, and genotyping in the clinic.

Application of microfluidic technology based on surface-enhanced Raman scattering in cancer biomarker detection: A review

With the continuous discovery and research of predictive cancer-related biomarkers, liquid biopsy shows great potential in cancer diagnosis. Surface-enhanced Raman scattering (SERS) and microfluidic technology have received much attention among the various cancer biomarker detection methods. The former has ultrahigh detection sensitivity and can provide a unique fingerprint. In contrast, the latter has the characteristics of miniaturization and integration, which can realize accurate control of the detection samples and high-throughput detection through design. Both have the potential for point-of-care testing (POCT), and their combination (lab-on-a-chip SERS (LoC-SERS)) shows good compatibility. In this paper, the basic situation of circulating proteins, circulating tumor cells, exosomes, circulating tumor DNA (ctDNA), and microRNA (miRNA) in the diagnosis of various cancers is reviewed, and the detection research of these biomarkers by the LoC-SERS platform in recent years is described in detail. At the same time, the challenges and future development of the platform are discussed at the end of the review. Summarizing the current technology is expected to provide a reference for scholars engaged in related work and interested in this field.

CRISPR/dCas9-Mediated Specific Molecular Assembly Facilitates Genotyping of Mutant Circulating Tumor DNA

Breakthroughs in circulating tumor DNA (ctDNA) analysis are critical in tumor liquid biopsies but remain a technical challenge due to the double-stranded structure, extremely low abundance, and short half-life of ctDNA. Here, we report an electrochemical CRISPR/dCas9 sensor (E-dCas9) for sensitive and specific detection of ctDNA at a single-nucleotide resolution. The E-dCas9 design harnesses the specific capture and unzipping of target ctDNA by dCas9 to introduce a complementary reporter probe for specific molecular assembly and signal amplification. By efficient homogeneous assembly and interfacial click reaction, the assay demonstrates superior sensitivity (up to 2.86 fM) in detecting single-base mutant ctDNA and a broad dynamic range spanning 6 orders of magnitude. The sensor is also capable of measuring 10 fg/μL of a mutated target in excess of wild-type ones (1 ng/μL), equivalent to probing 0.001% of the mutation relative to the wild type. In addition, our sensor can monitor the dynamic expression of cellular genomic DNA and allows accurate analysis of blood samples from patients with nonsmall cell lung cancer, suggesting the potential of E-dCas9 as a promising tool in ctDNA-based cancer diagnosis.

Current research status of tumor cell biomarker detection

With the annual increases in the morbidity and mortality rates of tumors, the use of biomarkers for early diagnosis and real-time monitoring of tumor cells is of great importance. Biomarkers used for tumor cell detection in body fluids include circulating tumor cells, nucleic acids, protein markers, and extracellular vesicles. Among them, circulating tumor cells, circulating tumor DNA, and exosomes have high potential for the prediction, diagnosis, and prognosis of tumor diseases due to the large amount of valuable information on tumor characteristics and evolution; in addition, in situ monitoring of telomerase and miRNA in living cells has been the topic of extensive research to understand tumor development in real time. Various techniques, such as enzyme-linked immunosorbent assays, immunoblotting, and mass spectrometry, have been widely used for the detection of these markers. Among them, the detection of tumor cell markers in body fluids based on electrochemical biosensors and fluorescence signal analysis is highly preferred because of its high sensitivity, rapid detection and portable operation. Herein, we summarize recent research progress in the detection of tumor cell biomarkers in body fluids using electrochemical and fluorescence biosensors, outline the current research status of in situ fluorescence monitoring and the analysis of tumor markers in living cells, and discuss the technical challenges for their practical clinical application to provide a reference for the development of new tumor marker detection methods.

Advances in novel strategies for isolation, characterization, and analysis of CTCs and ctDNA

Over the past decade, the detection and analysis of liquid biopsy biomarkers such as circulating tumor cells (CTCs) and circulating tumor DNA (ctDNA) have advanced significantly. They have received recognition for their clinical usefulness in detecting cancer at an early stage, monitoring disease, and evaluating treatment response. The emergence of liquid biopsy has been a helpful development, as it offers a minimally invasive, rapid, real-time monitoring, and possible alternative to traditional tissue biopsies. In resource-limited settings, the ideal platform for liquid biopsy should not only extract more CTCs or ctDNA from a minimal sample volume but also accurately represent the molecular heterogeneity of the patient's disease. This review covers novel strategies and advancements in CTC and ctDNA-based liquid biopsy platforms, including microfluidic applications and comprehensive analysis of molecular complexity. We discuss these systems' operational principles and performance efficiencies, as well as future opportunities and challenges for their implementation in clinical settings. In addition, we emphasize the importance of integrated platforms that incorporate machine learning and artificial intelligence in accurate liquid biopsy detection systems, which can greatly improve cancer management and enable precision diagnostics.

High-throughput extraction on a dynamic solid phase for low-abundance biomarker isolation from biological samples

Liquid biopsy, in particular circulating tumor DNA (ctDNA) analysis, has paved the way for a new noninvasive approach to cancer diagnosis, treatment selection and follow-up. As a crucial step in the analysis, the extraction of the genetic material from a complex matrix needs to meet specific requirements such as high specificity and low loss of target. Here, we developed a new generation of microfluidic fluidized beds (FBs) that enable the efficient extraction and preconcentration of specific ctDNA sequences from human serum with flow rates up to 15 µL/min. We first demonstrated that implementation of a vibration system inducing flow rate fluctuations combined with a mixture of different bead sizes significantly enhanced bead homogeneity, thereby increasing capture efficiency. Taking advantage of this new generation of high-throughput magnetic FBs, we then developed a new method to selectively capture a double-stranded (dsDNA) BRAF mutated DNA sequence in complex matrices such as patient serum. Finally, as proof of concept, ligation chain reaction (LCR) assays were performed to specifically amplify a mutated BRAF sequence, allowing the detection of concentrations as low as 6 × 104 copies/µL of the mutated DNA sequence in serum.

A three-in-one microfluidic droplet digital PCR platform for absolute quantitative analysis of DNA

Droplet digital polymerase chain reaction (ddPCR) technology has found widespread applications in the ultrasensitive analysis of nucleic acids, where integrated ddPCR platforms with the capability of sample dispersion, followed by in situ amplification and data analysis, are highly expected. However, current integrated ddPCR platforms are usually limited by either difficultly mass-produced materials or lack of integrated control instruments, restricting their practical application. This paper proposes an integrated three-in-one ddPCR platform with high user-friendliness and practicability, which is composed of an easy-to-use chip and a matching control instrument. The chip was made of thermally resistant and easily mass-produced polycarbonate (PC) material, and the benchtop control instrument was designed to perform droplet generation, in situ amplification, and fluorescence reading. The droplet generation and in situ heating on the chip were well characterized. Finally, the performance of the platform was validated through the analysis of the EGFR L858R mutation in lung cancer. The proposed three-in-one ddPCR platform shows great practicability in ultrasensitive nucleic acid testing. By virtue of its sensitivity, practicability, and cost-effectiveness, the ddPCR can serve as a universal detection platform for monitoring nucleic acid in the fields of tumor diagnosis, pathogen detection, and prenatal diagnosis.

Toward Personalized Nanomedicine: The Critical Evaluation of Micro and Nanodevices for Cancer Biomarker Analysis in Liquid Biopsy

Liquid biopsy for the analysis of circulating cancer biomarkers (CBs) is a major advancement toward the early detection of cancer. In comparison to tissue biopsy techniques, liquid biopsy is relatively painless, offering multiple sampling opportunities across easily accessible bodily fluids such as blood, urine, and saliva. Liquid biopsy is also relatively inexpensive and simple, avoiding the requirement for specialized laboratory equipment or trained medical staff. Major advances in the field of liquid biopsy are attributed largely to developments in nanotechnology and microfabrication that enables the creation of highly precise chip-based platforms. These devices can overcome detection limitations of an individual biomarker by detecting multiple markers simultaneously on the same chip, or by featuring integrated and combined target separation techniques. In this review, the major advances in the field of portable and semi-portable micro, nano, and multiplexed platforms for CB detection for the early diagnosis of cancer are highlighted. A comparative discussion is also provided, noting merits and drawbacks of the platforms, especially in terms of portability. Finally, key challenges toward device portability and possible solutions, as well as discussing the future direction of the field are highlighted.

Rapid on-site nucleic acid testing: On-chip sample preparation, amplification, and detection, and their integration into all-in-one systems

As nucleic acid testing is playing a vital role in increasingly many research fields, the need for rapid on-site testing methods is also increasing. The test procedure often consists of three steps: Sample preparation, amplification, and detection. This review covers recent advances in on-chip methods for each of these three steps and explains the principles underlying related methods. The sample preparation process is further divided into cell lysis and nucleic acid purification, and methods for the integration of these two steps on a single chip are discussed. Under amplification, on-chip studies based on PCR and isothermal amplification are covered. Three isothermal amplification methods reported to have good resistance to PCR inhibitors are selected for discussion due to their potential for use in direct amplification. Chip designs and novel strategies employed to achieve rapid extraction/amplification with satisfactory efficiency are discussed. Four detection methods providing rapid responses (fluorescent, optical, and electrochemical detection methods, plus lateral flow assay) are evaluated for their potential in rapid on-site detection. In the final section, we discuss strategies to improve the speed of the entire procedure and to integrate all three steps onto a single chip; we also comment on recent advances, and on obstacles to reducing the cost of chip manufacture and achieving mass production. We conclude that future trends will focus on effective nucleic acid extraction via combined methods and direct amplification via isothermal methods.

One-Stop Extraction and In Situ RT-qPCR for Ultrasensitive Detection of Highly Diluted SARS-CoV-2 in Large-Volume Samples from Aquatic Environments

Surveillance of severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) in aquatic environments attracted attention due to its considerable impacts on human health and ecology, especially in countries with poor sanitation standards. Based on a strategy of one-stop extraction and in situ amplification, we developed an ultrasensitive method that uses a polyacrylamide derivative-modified filter disc (PAD-FD), in which highly diluted RNA can be efficiently concentrated onto the filter disc and directly used for amplification. A newly designed spin column with a cup-like filter base facilitated the non-contact transfer of the affinity filter disc from the column to a PCR tube. The limit of detection of the PAD-FD coupled with RT-qPCR is 10 copies/mL. Using 32 suspected SARS-CoV-2 samples, we demonstrated that the detection rate of our method (62.5%, 20/32) was triple the rate of the commercial kit (18.8%, 6/32). Using a PAD-FD, 56.3% (18/32) and 40.6% (13/32) of the 10-fold-dilution samples with river and tap water, respectively, were detected. Even when diluted 100-fold, 28.1% (9/32) and 37.5% (12/32) were still detected in river and tap water, respectively. We believe that the PAD-FD method offers an accurate testing tool for monitoring viral RNA in aquatic environments, contributing to the forewarning of the SARS-CoV-2 outbreak and the breaking of the transmission chain.

An ultrasensitive and rapid "sample-to-answer" microsystem for on-site monitoring of SARS-CoV-2 in aerosols using "in situ" tetra-primer recombinase polymerase amplification

Airborne transmissibility of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has highlighted the urgent need for aerosol monitoring of SARS-CoV-2 to prevent sporadic outbreaks of COVID-19. The inadequate sensitivity of conventional methods and the lack of an on-site detection system limited the practical SARS-CoV-2 monitoring of aerosols in public spaces. We have developed a novel SARS-CoV-2-in-aerosol monitoring system (SIAMs) which consists of multiple portable cyclone samplers for collecting aerosols from several venues and a sensitive "sample-to-answer" microsystem employing an integrated cartridge for the analysis of SARS-CoV-2 in aerosols (iCASA) near the sampling site. By seamlessly combining viral RNA extraction based on a chitosan-modified quartz filter and "in situ" tetra-primer recombinase polymerase amplification (tpRPA) into an integrated microfluidic cartridge, iCASA can provide an ultra-high sensitivity of 20 copies/mL, which is nearly one order of magnitude greater than that of the commercial kit, and a short turnaround time of 25 min. By testing various clinical samples of nasopharyngeal swabs, saliva, and exhaled breath condensates obtained from 23 COVID-19 patients, we demonstrate that the positive rate of our system was 3.3 times higher than those of the conventional method. Combining with multiple portable cyclone samplers, we detected 52.2% (12/23) of the aerosol samples, six times higher than that of the commercial kit, collected from the isolation wards of COVID-19 patients, demonstrating the excellent performance of our system for SARS-CoV-2-in-aerosol monitoring. We envision the broad application of our microsystem in aerosol monitoring for fighting the COVID-19 pandemic.

Recent advances in integrated microfluidics for liquid biopsies and future directions

Liquid biopsies have piqued the interest of researchers as a new tumor diagnosis technique due to their unique benefits of non-invasiveness, sensitivity, and convenience. Recent advances in microfluidic technology have integrated separation, purification, and detection, allowing for high-throughput, high-sensitivity, and high-controllability detection of specific biomarkers in liquid biopsies. With the increasing demand for tumor detection and individualized treatment, new challenges are emerging for the ever-improving microfluidic technology. The state-of-the-art microfluidic design and fabrications have been reviewed in this manuscript, and how this technology can be applied to liquid biopsies from the point of view of the detection process. The primary discussion objectives are circulating tumor cells (CTCs), exosomes, and circulating nucleic acid (ctDNA). Furthermore, the challenges and future direction of microfluidic technology in detecting liquid biomarkers have been discussed.

Mixing and Flow Transition in an Optimized Electrokinetic Turbulent Micromixer

Micromixer is a key element in a lab on a chip for broad applications in the analysis and measurement of chemistry and engineering. Previous investigations reported that electrokinetic (EK) turbulence could be realized in a "Y" type micromixer with a cross-sectional dimension of 100 μm order. Although the ultrafast turbulent mixing can be generated at a bulk flow Reynolds number on the order of unity, the micromixer has not been optimized. In this investigation, we systematically investigated the influence of electric field intensity, AC frequency, electric conductivity ratio, and channel width at the entrance on the mixing effect and transition electric Rayleigh number in the "Y" type electrokinetic turbulent micromixer. It is found that the optimal mixing is realized in a 350 μm wide micromixer, under 100 kHz and 1.14 × 10⁵ V/m AC electric field, with an electric conductivity ratio of 1:3000. Under these conditions, a degree of mixedness of 0.93 can be achieved at 84 μm from the entrance and 100 ms. A further investigation of the critical electric field and the critical electric Rayleigh number indicates that the most unstable condition of EK flow instability is inconsistent with that of the optimal mixing in EK turbulence. To predict the evolution of EK flow under high Ra_σ and guide the design of EK turbulent micromixers, it is necessary to apply a computational turbulence model instead of linear instability analysis.

A direct and multiplex digital PCR chip for EGFR mutation

Digital PCR is a sensitive detection method, which has important applicability in liquid biopsy through the measurement of ctDNA. However, the current sample pre-processing of ctDNA and the multiplex detection capability of digital PCR have limitations. In view of the above two aspects, we developed a digital PCR chip with multiplex capability and established a direct amplification detection method without nucleic acid extraction. Through the design and processing of the chip, we established a self-priming multiplex digital PCR chip, which can detect 4 targets using single fluorescence. This method can be applied to most digital PCR chips. In addition, we used the plasma of lung cancer patients to establish a direct digital PCR detection method based on the chip, thereby avoiding disadvantages caused by the ctDNA extraction process. As a proof of concept, we prepared blood plasma samples with different concentration of ctDNA to prove the chip's multiplex detection capabilities and the results suggested that this multiplex digital PCR is accurate. Overall, our platform provides a novel and promising option for the detection of ctDNA.

DNA-MnO2 Nanoconjugates Investigation and Application for Electrochemical Polymerase Chain Reaction

Manganese dioxide (MnO₂) nanosheets are emerging for biomedical applications with excellent physical and chemical properties. Adsorption of DNA on MnO₂ is important for biosensing, bioimaging, and therapy. Nevertheless, current fundamental understanding about the interaction is preliminary. Herein, UV-vis absorption spectra are applied to systematically explore the biointerfacial interaction between DNA and MnO₂ with the factors of salt concentration, pH value, temperature, DNA concentration, and length. The results offer important fundamental insights into the investigation of DNA-MnO₂ nanocomposites. Meanwhile, the optimal parameters are applied to construct a screen-printed electrode (SPE) modified with polymerase chain reaction (PCR) primer-decorated MnO₂ nanosheets. An electrochemical PCR system is then developed for ultrasensitive detection of circulating tumor DNA (ctDNA). The limit of detection is determined to be 0.1 fM, and high selectivity is demonstrated. Combining the merits of SPE, DNA-MnO₂ nanosheets, and an amplified reaction, this developed strategy shows great promise in bioanalysis, clinical disease diagnosis, and biomedicine applications.

PEAC: An Ultrasensitive and Cost-Effective MRD Detection System in Non-small Cell Lung Cancer Using Plasma Specimen

Circulating tumor DNA (ctDNA), a tumor-derived fraction of cell-free DNA (cfDNA), has emerged as a promising marker in targeted therapy, immunotherapy, and minimal residual disease (MRD) monitoring in postsurgical patients. However, ctDNA level in early-stage cancers and postsurgical patients is very low, which posed many technical challenges to improve the detection rate and sensitivity, especially in the clinical practice of MRD detection. These challenges usually include insufficient DNA input amount, limit of detection (LOD), and high experimental costs. To resolve these challenges, we developed an ultrasensitive ctDNA MRD detection system in this study, namely PErsonalized Analysis of Cancer (PEAC), to simultaneously detect up to 37 mutations, which account for 70–80% non-small cell lung cancer (NSCLC) driver mutations from low plasma sample volume and enables LOD of 0.01% at a single-site level. We demonstrated the high performance achieved by PEAC on both cfDNA reference standards and clinical plasma samples from three NSCLC patient cohorts. For cfDNA reference standards, PEAC achieved a specificity of 99% and a sensitivity of 87% for the mutations at 0.01% allele fraction. In the second cohort, PEAC showed 100% concordance rate between ddPCR and Next-generation sequencing (NGS) among 29 samples. In the third cohort, 22 of 59 patients received EGFR TKI treatment. Among them, three in four patients identified low level actionable gene mutations only by PEAC had partial responses after targeted therapy, demonstrating high ctDNA detection ability of PEAC. Overall, the developed PEAC system can detect the majority of NSCLC driver mutations using 8–10 ml plasma samples, and has the advantages of high detection sensitivity and lower costs compared with the existing technologies such as ddPCR and NGS. These advantages make the PEAC system quite appropriate for ctDNA and MRD detection in early-stage NSCLC and postsurgical recurrence monitoring.

Direct digital polymerase chain reaction chip for the detection of EGFR T790M mutation in plasma

Nucleic acid extraction and purification before amplification is considered an essential step for nucleic acid amplification testing. However, this may cause losses or introduce errors that can lead to inaccurate results, especially when using samples with a small nucleic acid concentration. Here, we developed a direct digital chip that enabled us to detect nucleic acid without DNA extraction and purification. We have developed a self-priming liquid-dispensing digital PCR chip that does not require any external power. This is a robust anti-evaporation digital PCR chip with fast sampling and accurate quantification performance. Using this chip, we have established an on-chip direct nucleic acid amplification method that does not require nucleic acid extraction and purification for liquid biopsy samples. In order to verify the feasibility of this chip for clinical samples, we detected the EGFR T790M mutation from plasma. Results showed that EGFR T790M mutation could be detected with an accuracy of 100% and a sensitivity of 0.01%. Without nucleic acid extraction and purification, the assay avoids complex pre-processing, thus saving time and achieving precise quantification. We expect our direct digital PCR chip to have practical applications in diagnosis, screening, and research, especially in resource-deprived regions.

Recent Advances in Device Engineering and Computational Analysis for Characterization of Cell-Released Cancer Biomarkers

During cancer progression, tumors shed different biomarkers into the bloodstream, including circulating tumor cells (CTCs), extracellular vesicles (EVs), circulating cell-free DNA (cfDNA), and circulating tumor DNA (ctDNA). The analysis of these biomarkers in the blood, known as 'liquid biopsy' (LB), is a promising approach for early cancer detection and treatment monitoring, and more recently, as a means for cancer therapy. Previous reviews have discussed the role of CTCs and ctDNA in cancer progression; however, ctDNA and EVs are rapidly evolving with technological advancements and computational analysis and are the subject of enormous recent studies in cancer biomarkers. In this review, first, we introduce these cell-released cancer biomarkers and briefly discuss their clinical significance in cancer diagnosis and treatment monitoring. Second, we present conventional and novel approaches for the isolation, profiling, and characterization of these markers. We then investigate the mathematical and in silico models that are developed to investigate the function of ctDNA and EVs in cancer progression. We convey our views on what is needed to pave the way to translate the emerging technologies and models into the clinic and make the case that optimized next-generation techniques and models are needed to precisely evaluate the clinical relevance of these LB markers.

Sensitive quantitative detection of SARS-CoV-2 in clinical samples using digital warm-start CRISPR assay

Quantifying severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in clinical samples is crucial for early diagnosis and timely medical treatment of coronavirus disease 2019. Here, we describe a digital warm-start CRISPR (dWS-CRISPR) assay for sensitive quantitative detection of SARS-CoV-2 in clinical samples. The dWS-CRISPR assay is initiated at above 50 °C and overcomes undesired premature target amplification at room temperature, enabling accurate and reliable digital quantification of SARS-CoV-2. By targeting SARS-CoV-2's nucleoprotein gene, the dWS-CRISPR assay is able to detect down to 5 copies/μl SARS-CoV-2 RNA in the chip. It is clinically validated by quantitatively determining 32 clinical swab samples and three clinical saliva samples. Moreover, it has been demonstrated to directly detect SARS-CoV-2 in heat-treated saliva samples without RNA extraction. Thus, the dWS-CRISPR method, as a sensitive and reliable CRISPR assay, facilitates accurate SARS-CoV-2 detection toward digitized quantification.

MS2 device: smartphone-facilitated mobile nucleic acid analysis on microfluidic device

Mobile sensing based on the integration of microfluidic devices and smartphones, so-called MS2 technology, has enabled many applications over recent years and continues to stimulate growing interest in both research communities and industries. In particular, MS2 technology has been proven to be able to be applied to molecular diagnostic analysis and can be implemented for basic research and clinical testing. However, the currently reported MS2-based nucleic acid analysis system has limited use in practical applications, because it is not integrated with quantitative PCR, multiplex PCR, and isothermal amplification functions, and lacks temperature control, image acquisition and real-time processing units with excellent performance. To provide a more universal and powerful platform, we here developed a novel MS2 device by integrating a thermocycler, a multi fluorescence detection unit, a PCR chip, an isothermal chip, and a smartphone. The MS2 device was approximately 325 mm (L) × 200 mm (W) × 200 mm (H) in volume and only 5 kg in weight, and showed an average power consumption of about 38.4 W. The entire nucleic acid amplification and analysis could be controlled through a self-made smartphone App. The maximum heating and cooling rates were 5 °C s-1 and 4 °C s-1, respectively. The entire PCR could be completed within 65 min. The temperature uniformity was less than 0.1 °C. Besides, the temperature stability over time (30 min) was within ±0.04 °C. Four optical channels were integrated (FAM, HEX, TAMRA, and ROX) on the MS2 device. In particular, the PCR-based detection sensitivity reached 1 copy per μL, and the amplification efficiency was calculated to be 106.8%. Besides, the MS2 device also was compatible with multiplex PCR and isothermal amplification. In short, the MS2 device showed performance consistent with that of traditional commercial equipment. Thus, the MS2 device provides an easy and integrated experimental platform for molecular diagnostic-related research and potential medical diagnostic applications.

CRISPR-Cas13 System as a Promising and Versatile Tool for Cancer Diagnosis, Therapy, and Research

Over the past decades, significant progress has been made in targeted cancer therapy. In precision oncology, molecular profiling of cancer patients enables the use of targeted cancer therapeutics. However, current diagnostic methods for molecular analysis of cancer are costly and require sophisticated equipment. Moreover, targeted cancer therapeutics such as monoclonal antibodies and small-molecule drugs may cause off-target effects and they are available for only a minority of cancer driver proteins. Therefore, there is still a need for versatile, efficient, and precise tools for cancer diagnostics and targeted cancer treatment. In recent years, the CRISPR-based genome and transcriptome engineering toolbox has expanded rapidly. Particularly, the RNA-targeting CRISPR-Cas13 system has unique biochemical properties, making Cas13 a promising tool for cancer diagnosis, therapy, and research. Cas13-based diagnostic methods allow early detection and monitoring of cancer markers from liquid biopsy samples without the need for complex instrumentation. In addition, Cas13 can be used for targeted cancer therapy through degrading and manipulating cancer-associated transcripts with high efficiency and specificity. Moreover, Cas13-mediated programmable RNA manipulation tools offer invaluable opportunities for cancer research, identification of drug-resistance mechanisms, and discovery of novel therapeutic targets. Here, we review and discuss the current use and potential applications of the CRISPR-Cas13 system in cancer diagnosis, therapy, and research. Thus, researchers will gain a deep understanding of CRISPR-Cas13 technologies, which have the potential to be used as next-generation cancer diagnostics and therapeutics.

High-throughput human DNA purification on a centrifugal microfluidic device for rapid forensic sex-typing

We introduce a novel centrifugal disc for purifying nucleic acid (NA) in a high-throughput manner to perform the human sex-typing of forensic samples. The centrifugal disc was designed with double-sided etched channels to fabricate 30 extraction units, which was capable of purifying 30 forensic samples in a single run. In order to introduce the washing solution (70% ethanol) and the elution buffer for the 30 extraction units in an automatic manner, we designed the aliquoting chambers that were connected with a zigzag delivery channel. The super-hydrophobic zigzag-shaped aliquot structure plays a crucial role in automatically dividing the washing solution and the elution buffer into 30 aliquots with one injection shot. The Whatman glass filter paper was used as an NA extraction matrix and sophisticated passive valves were equipped to avoid the overflowing of these buffers to the neighboring chamber during the injection. To operate the disc, we developed a portable workstation that consists of a buffer storage system, a buffer injection system, and a spinning unit. The entire process was automatically operated by the in-house portable workstation. Genomic DNA extraction using thirty forensic samples was completed in 10 min. Using the purified genomic DNA, we performed a loop-mediated isothermal amplification (LAMP) reaction for sex-typing by targeting the human alphoid repeat sequence of the Y-chromosome and the human 18S rRNA. The combination of the high-throughput centrifugal disc for NA extraction and the LAMP reaction enables us to complete the genetic sex-typing in 30 min.

Fully integrated microfluidic devices for qualitative, quantitative and digital nucleic acids testing at point of care

Benefiting from emerging miniaturized and equipment-free nucleic acid testing (NAT) technologies, fully integrated NAT devices at point of care (POC) with the capability of "sample-in-answer-out" are proceeding at a break-neck speed to eliminate complex operations and reduce the risk of contamination. Like the development of polymerase chain reaction (PCR) technology (the standard technique for NAT), the detection signal of fully integrated NAT devices has evolved from qualitative to quantitative and recently to digital readout, aiming at expanding their extensive applications through gradually improving detection sensitivity and accuracy. This review firstly introduces the existing commercial products, and then illustrates recent fully integrated microfluidic devices for NAT at POC from the aspect of detection signals (i.e., qualitative, quantitative and digital). Importantly, the key issues of existing commercial products and the main challenges between scientific research and product development are discussed. On this basis, we envision that the MARCHED (miniaturized, automatic, reagent-preloaded, commercializable, high-throughput, environment-independent and disposable) NAT devices are expected to be realized in the near future.