Employing an Intercalated Redox Reporter in Electrochemical Aptamer-Based Biosensors to Enable Calibration-Free Molecular Measurements in Undiluted Serum

Nucleic acid-based wearable and implantable electrochemical sensors

The rapid advancements in nucleic acid-based electrochemical sensors for implantable and wearable applications have marked a significant leap forward in the domain of personal healthcare over the last decade. This technology promises to revolutionize personalized healthcare by facilitating the early diagnosis of diseases, monitoring of disease progression, and tailoring of individual treatment plans. This review navigates through the latest developments in this field, focusing on the strategies for nucleic acid sensing that enable real-time and continuous biomarker analysis directly in various biofluids, such as blood, interstitial fluid, sweat, and saliva. The review delves into various nucleic acid sensing strategies, emphasizing the innovative designs of biorecognition elements and signal transduction mechanisms that enable implantable and wearable applications. Special perspective is given to enhance nucleic acid-based sensor selectivity and sensitivity, which are crucial for the accurate detection of low-level biomarkers. The integration of such sensors into implantable and wearable platforms, including microneedle arrays and flexible electronic systems, actualizes their use in on-body devices for health monitoring. We also tackle the technical challenges encountered in the development of these sensors, such as ensuring long-term stability, managing the complexity of biofluid dynamics, and fulfilling the need for real-time, continuous, and reagentless detection. In conclusion, the review highlights the importance of these sensors in the future of medical engineering, offering insights into design considerations and future research directions to overcome existing limitations and fully realize the potential of nucleic acid-based electrochemical sensors for healthcare applications.

Single Voltammetric Sweep Calibration-Free Interrogation of Electrochemical Aptamer-Based Sensors Employing Continuous Square Wave Voltammetry

Continuous square wave voltammetry (cSWV) is a technique that enables the continuous collection of current data (at 100 kHz) to maximize the information content obtainable from a single voltammetric sweep. This data collection procedure results in the generation of multiple voltammograms corresponding to different effective square wave frequencies. The application of cSWV brings significant benefits to electrochemical aptamer-based (E-AB) sensors. The E-AB sensor platform permits continuous real-time monitoring of small biological molecules. Traditionally, E-AB sensors report only on changes in analyte concentration rather than absolute quantification in matrices when basal concentrations are not known a priori. This is because they exhibit a voltammetric peak current even in the absence of a target. However, using a dual-frequency approach, calibration-free sensing can be performed effectively, eliminating the sensor-to-sensor variation by taking ratiometric current responses obtained at two different frequencies from two different voltammetric sweeps. In employing our approach, cSWV provides a great advantage over the conventionally used square wave voltammetry since the required voltammograms are collected with a single sweep, which improves the temporal resolution of the measurement when considering the current at multiple frequencies for improved accuracy and reduced surface interrogation. Moreover, we show here that using cSWV provides significantly improved concentration predictions. E-AB sensors sensitive to ATP and tobramycin were interrogated across a wide range of concentrations. With this approach, cSWV allowed us to estimate the target concentration, retaining up to an ±5% error of the expected concentration when tested in buffer and complex media.

Isothermal Reciprocal Catalytic DNA Circuit for Sensitive Analysis of Kanamycin

Inappropriate use of veterinary drugs can result in the presence of antibiotic residues in animal-derived foods, which is a threat to human health. A simple yet efficient antibiotic-sensing method is highly desirable. Programmable DNA amplification circuits have supplemented robust toolkits for food contaminants monitoring. However, they currently face limitations in terms of their intricate design and low signal gain. Herein, we have engineered a robust reciprocal catalytic DNA (RCD) circuit for highly efficient bioanalysis. The trigger initiates the cascade hybridization reaction (CHR) to yield plenty of repeated initiators for activating the rolling circle amplification (RCA) circuit. Then the RCA-generated numerous reconstituted triggers can reversely stimulate the CHR circuit. This results in a self-sufficient supply of numerous initiators and triggers for the successive cross-invasion of CHR and RCA amplifiers, thus leading to exponential signal amplification for the highly efficient detection of analytes. With its flexible programmability and modular features, the RCD amplifier can serve as a universal toolbox for the high-performance and accurate sensing of kanamycin in buffer and food samples including milk, honey, and fish, highlighting its enormous promise for low-abundance contaminant analysis in foodstuffs.

Rapid nanomolar detection of Δ9-tetrahydrocannabinol in biofluids via electrochemical aptamer-based biosensor

BACKGROUND

The fabrication of sensors capable of achieving rapid, sensitive, and highly selective detection of target molecules in complex fluids is key to realizing their real-world applications. For example, there is an urgent need in drugged driving roadside screening scenarios to develop a method that can be used for rapid drug detection and that avoids interference from the matrix in the sample. How to minimize the interference of complex matrices in biofluids at the electrode interface is the key to improve the sensitivity of the sensor.

RESULTS

This work develops a facile and green method to prepare rough electrodes with a porous structure for constructing electrochemical aptamer-based (EAB) sensors for rapid, sensitive and accurate detection of Δ9-tetrahydrocannabinol (THC) in biofluids. The electroactive area of the rough electrode was 21 times of smooth electrode. And the antifouling performance of the rough electrode was much better than that of smooth electrode. Based on the unique advantages of the rough electrode, the developed EAB sensor achieves rapid nanomolar detection of THC in undiluted serum, undiluted urine and 50 % saliva with the detection limit of 5.0 nM, 10 nM and 10 nM, respectively. Moreover, our method possesses good reproducibility, accuracy and specificity.

SIGNIFICANCE

The porous structure can effectively reduce the non-specific adsorption and enhance the stability of the signal, while the larger active area can modify more aptamers, thus improving the sensitivity. The detection limits of the EAB sensor were lower than the cutoff concentration of THC in drugged driving and the measuring process was completed within 60 s after target addition, which makes the present sensors capable for real-world applications.

SERS Immunoassay Based on an Enzyme-Catalyzed Cascade Reaction and Metal-Organic Framework/Alkaline Phosphatase for Ultrasensitive Detection of Adenosine Triphosphate

Herein, an adenosine triphosphate (ATP)-induced enzyme-catalyzed cascade reaction system based on metal-organic framework/alkaline phosphatase (MOF/ALP) nanocomposites was designed to establish a surface-enhanced Raman spectroscopy (SERS) biosensor for use in rapid, sensitive ATP detection. Numerous ALP molecules were first encapsulated using ZIF-90 to temporarily deactivate the enzyme activity, similar to a lock. Au nanostars (AuNSs), as SERS-enhancing substrates, were combined with o-phenylenediamine (OPD) to form AuNSs@OPD, which could significantly improve the Raman signal of OPD. When the target ATP interacted with the MOF/ALP nanocomposites, ATP could act as a key to open the MOF structure, releasing ALP, which should further catalyze the conversion of OPD to oxOPD with the aid of ascorbic acid 2-phosphate. Therefore, with the increasing concentrations of ATP, more ALP was released to catalyze the conversion of OPD, resulting in the reduced intensity of the Raman peak at 1262 cm-1, corresponding to the level of OPD. Based on this principle, the ATP-induced enzyme-catalyzed cascade reaction SERS biosensor enabled the ultrasensitive detection of ATP, with a low detection limit of 0.075 pM. Consequently, this study provides a novel strategy for use in the ultrasensitive, rapid detection of ATP, which displays considerable potential for application in the fields of biomedicine and disease diagnosis.

Employing the Anchor DSPE-PEG as a Redox Probe for Ratiometric Electrochemical Detection of Surface Proteins on Extracellular Vesicles with Aptamers

Quantitative analysis of surface proteins on extracellular vesicles (EVs) has been considered to be a crucial approach for reflecting the status of diseases. Due to the diverse composition of surface proteins on EVs and the interference from nonvesicular proteins, accurately detecting the expression of surface proteins on EVs remains a challenging task. While membrane affinity molecules have been widely employed as EVs capture probes to address this issue, their inherent biochemical properties have not been effectively harnessed. In this paper, we found that the electrochemical redox activity of the DSPE-PEG molecule was diminished upon its insertion into the membrane of EVs. This observation establishes the DSPE-PEG molecule modified on the Au electrode surface as a capture and a redox probe for the electrochemical detection of EVs. By utilizing methylene blue-labeled aptamers, the targeted surface proteins of EVs can be detected by recording the ratio of the oxidation peak current of methylene blue and DSPE-PEG. Without complicated signal amplification, the detection limit for EVs is calculated to be 8.11 × 102 particles/mL. Using this platform, we directly analyzed the expression of CD63 and HER2 proteins on the surface of EVs in human clinical plasma samples, demonstrating its significant potential in distinguishing breast cancer patients from healthy individuals.

Electrochemical Biosensors for Whole Blood Analysis: Recent Progress, Challenges, and Future Perspectives

Whole blood, as one of the most significant biological fluids, provides critical information for health management and disease monitoring. Over the past 10 years, advances in nanotechnology, microfluidics, and biomarker research have spurred the development of powerful miniaturized diagnostic systems for whole blood testing toward the goal of disease monitoring and treatment. Among the techniques employed for whole-blood diagnostics, electrochemical biosensors, as known to be rapid, sensitive, capable of miniaturization, reagentless and washing free, become a class of emerging technology to achieve the target detection specifically and directly in complex media, e.g., whole blood or even in the living body. Here we are aiming to provide a comprehensive review to summarize advances over the past decade in the development of electrochemical sensors for whole blood analysis. Further, we address the remaining challenges and opportunities to integrate electrochemical sensing platforms.

Employing a Redox Reporter-Modified Self-Assembly Monolayer in Electrochemical Aptamer-Based Sensors to Enable Calibration-Free Measurements

Electrochemical aptamer-based (E-AB) sensors suffer from sensor-to-sensor signal variations due to the variation in the total number of probes immobilized on the sensor surface, the effective working area, and the heterogeneity properties of the electrode surface, thus requiring a calibration step prior to each measurement. This is impractical, if not possible, for some cases, e.g., in a complex matrix including blood samples. In response, we propose a calibration-free approach to achieve the measurement of biorelevant small-molecule and protein analytes. Specifically, we employed one reporter labeled onto an aptamer (e.g., methylene blue) for redox signaling, and the other reporter (e.g., ferrocene) was modified onto a self-assembly monolayer as a reference signal. By taking the ratio of the two signals, we achieved a much improved baseline stability and sensor-to-sensor reproducibility, which allows the calibration-free measurement of the analysis of the respective targets, including doxorubicin, vancomycin, and thrombin in both simple buffer and even directly complex samples including serum and whole blood.

A dual-emission ratiometric fluorescent sensor based on copper nanoclusters encapsulated in zeolitic imidazolate framework-90 for rapid detection and imaging of adenosine triphosphate

Adenosine triphosphate (ATP) is the primary energy carrier for intracellular metabolic processes. Accurate and rapid detection of ATP has important implications for clinical diagnosis. In this work, we reported a dual-emission ratiometric fluorescent probe Cu NCs-Al@ZIF-90 formed by encapsulating copper nanoclusters (Cu NCs) into zeolitic imidazolate framework-90 (ZIF-90) using a simple one-pot method. Cu NCs exhibited a remarkable fluorescence enhancement in the presence of aluminum ions due to the aggregation-induced emission (AIE) properties. When ATP existed, the Zn²⁺ nodes in the MOF material acted as selective sites for ATP recognition, resulting in the cleavage of Cu NCs-Al@ZIF-90. As a consequence, two reverse fluorescence changes were observed from released Cu NCs at 620 nm and imidazole-2-carboxaldehyde (2-ICA) at 450 nm, respectively. With the dual-emission ratiometric strategy, efficient and rapid determination of ATP was realized, giving a detection limit down to 0.034 mM in the concentration range of 0.2 mM to 0.625 mM. The convenient synthesis process and the rapid ATP-responsive ability made the proposed Cu NCs-Al@ZIF-90 probe highly promising in clinical and environmental analysis.

Combining bioinspired nanochannels with ferrocene doped MoS2 nanoplates: Application to ratiometric electrochemical detection of let-7a

Sensitive and accurate detection of tumor suppressor genes is vastly important to the related therapeutic research. Herein, a ratiometric electrochemical method for let-7a detection was established by integrating a ferrocene (Fc) doped MoS₂ nanoplates modified electrode into the nanochannels-based biosensing platform. The ratiometric signal was developed by the redox current of methylene blue (MB) which reflects the target recognition occurred into the nanochannels and the redox current of Fc which corrects the slight signal deviation caused by some analyte-independent factors. And thus, the ratio of peak current of MB and Fc (I_MB/I_Fc) measured at differential pulse voltammogram varied precisely with the increment of the concentration of let-7a incubated in the bioinspired nanochannels. The strategy of spherical DNAzyme induced deposition in nanochannels was utilized to further amplify the signal. Under optimal conditions, a wide linear dynamic range of 50 aM to 10 pM spanning five orders of magnitude was obtained. The developed electrochemical method, with attomole level of detection limit, was successfully applied to the determination of let-7a in human serum and tumor cells. The study not only offers a new route for reliable nucleic acid detection, but also provides an excellent opportunity to extend the application of the two-dimensional transition-metal dichalcogenides.

Flexible Point-of-Care Electrodes for Ultrasensitive Detection of Bladder Tumor-Relevant miRNA in Urine

Portable point-of-care testing (POCT) is currently drawing enormous attention owing to its great potential for disease diagnosis and personal health management. Electrochemical biosensors, with the intrinsic advantages of cost-effectiveness, fast response, ease of miniaturization, and integration, are considered as one of the most promising candidates for POCT application. However, the clinical application of electrochemical biosensors-based POCT is hindered by the decreased detection sensitivity due to the low abundance of disease-relevant biomolecules in extremely complex biological samples. Herein, we construct a flexible electrochemical biosensor based on single-stranded DNA functionalized single-walled carbon nanotubes (ssDNA-SWNTs) for high sensitivity and stability detection of miRNA-21 in human urine to achieve bladder cancer (BCa) diagnosis and classification. The ssDNA-SWNT electrodes with a 2D interconnected network structure exhibit a high electrical conductivity, thus enabling the ultrasensitive detection of miRNA-21 with a detection limit of 3.0 fM. Additionally, the intrinsic flexibility of ssDNA-SWNT electrodes endows the biosensors with the capability to achieve high stability detection of miRNA-21 even under large bending deformations. In a cohort of 40 BCa patients at stages I-III and 44 negative control samples, the constructed ssDNA-SWNT biosensors could detect BCa with a 92.5% sensitivity, an 88.6% specificity, and classify the cancer stages with an overall accuracy of 81.0%. Additionally, the flexible ssDNA-SWNT biosensors could also be utilized for treatment efficiency assessment and cancer recurrence monitoring. Owing to their excellent sensitivity and stability, the designed flexible ssDNA-SWNT biosensors in this work propose a strategy to realize point-of-care detection of complex clinical samples to achieve personalized healthcare.

A calibration-free approach to detecting microRNA with DNA-modified gold coated magnetic nanoparticles as dispersible electrodes

Gold coated magnetic nanoparticles (Au@MNPs), modified with DNA sequences give dispersible electrodes that can detect ultralow amounts of microRNAs and other nucleic acids but, as with most other sensors, they require calibration. Herein we show how to adapt a calibration free approach for electrochemical aptamer-based sensors on bulk electrodes to microRNA (miR-21) detection with methylene blue terminated DNA modified Au@MNPs. The electrochemical square wave voltammetry signal from the DNA-Au@MNPs when collected at a bulk electrode under magnetic control, decreases upon capture of miR-21. We show that the square wave voltammogram has concentration dependent and independent frequencies that can be used to give a calibration free signal.

Incorporating Hydrophobic Moieties into Self-Assembled Monolayers to Enable Electrochemical Aptamer-Based Sensors Deployed Directly in a Complex Matrix

Continuous real-time measurement of specific targets in complex biological samples is of great significance for early diagnosis and treatment of diseases and thus enables achievement of personalized medicine. Electrochemical aptamer-based (E-AB) sensors are good candidates to fill this role due to their high specificity, sensitivity, rapid detection, and simple preparation. However, this sensor class suffers from severe baseline drift in the complex matrix probably due to the nonspecific adsorption of components. Here, we introduce a series of self-assembled monolayers with a variety of hydrophobic functional groups into an E-AB sensor platform, achieving enhancement of the antifouling performance and thus the detection performance (e.g., stability, sensitivity, and specificity). We reveal that the antifouling performance enhanced by such hydrophobic SAMs is probably due to its instant adsorption of components onto the surface, rather than the repelling of these components by hydrophilic SAMs in previous reports.

Porous Fe3O4@COF-Immobilized gold nanoparticles with excellent catalytic performance for sensitive electrochemical detection of ATP

In this work, a "signal-off" electrochemical biosensor was established for sensitive detection of adenosine triphosphate (ATP) based on Fe₃O₄@covalent organic framework-immobilized gold nanoparticles (Fe₃O₄@COF-Au NPs) porous composite material as a nanocarrier. The proposed Fe₃O₄@COF-Au NPs could effectively confine Au NPs in the uniform channels of the Fe₃O₄@COF, which successfully avoided Au NPs aggregation to a certain extent and provided a comparatively independent and stable micro-environment via its hydrophobic porous nanochannels, thereby owning excellent electro-catalytic performance for the reduction of 4-nitrophenol. Moreover, the Fe₃O₄@COF-Au NPs nanomaterials were served as functional platform for immobilizing DNA substrate (S0), which was used to bind with the conversion product (S1) of the target ATP for subsequent branched hybridization chain reaction (b-HCR) to form dendritic DNA strands to hinder electron transfer between Fe₃O₄@COF-Au NPs and 4-nitrophenol, finally achieving sensitive detection of ATP with a wide linear range of 5 pM-50 μM and a low detection limit of 1.6 pM. Such strategy provides a multifunctional immobilized platform for the sensitive detection of ATP and a versatile strategy for monitoring other biomolecules.

Real-Time Tunable Dynamic Range for Calibration-Free Biomolecular Measurements with a Temperature-Modulated Electrochemical Aptamer-Based Sensor in an Unprocessed Actual Sample

The sensing technologies for monitoring molecular analytes in biological fluids with high frequency and in real time could enable a broad range of applications in personalized healthcare and clinical diagnosis. However, due to the limited dynamic range (less than 81-fold), real-time analysis of biomolecular concentration varying over multiple orders of magnitude is a severe challenge faced by this class of analytical platforms. For the first time, we describe here that temperature-modulated electrochemical aptamer-based sensors with a dynamically adjustable calibration-free detection window could enable continuous, real-time, and accurate response for the several-hundredfold target concentration changes in unprocessed actual samples. Specifically, we could regulate the electrode surface temperature of sensors to obtain the corresponding dynamic range because of the temperature-dependent affinity variations. This temperature modulation method relies on an alternate hot and cold electrode reported by our group, whose surface could actively be heated and cooled without the need for altering ambient temperature, thus likewise applying for the flowing system. We then performed dual-frequency calibration-free measurements at different interface temperatures, thus achieving an extended detection window from 25 to 2500 μM for procaine in undiluted urine, 1-500 μM for adenosine triphosphate, and 5-2000 μM for adenosine in undiluted serum. The resulting sensor architecture could drastically expand the real-time response range accessible to these continuous, reagent-less biosensors.

A Homogeneous Label-Free Electrochemical microRNA Biosensor Coupling With G-Triplex/Methylene Blue Complex and λ-Exonuclease-Assisted Recycling Amplification

A novel homogeneous label-free electrochemical biosensor using G-triplex/methylene blue (G3/MB) complex as the signal generator together with an amplification assisted by the λ-exonuclease (λ-Exo) has been successfully constructed for ultrasensitive microRNA (miRNA) detection. An integrated microelectrode was designed to realize the miniaturization of the homogeneous electrochemical assay. Taking advantage of G3, that can specifically bind with MB and decrease its diffusion current, a single-stranded functional DNA hairpin structure was designed as the bio-recognition probe. The probe consisted of G3, eight bases to block G3, and the complementary sequences of the target miRNA. Here we chose miRNA141—a potentially diagnostic biomarker of prostate cancer as the model target. The presence of miRNA141 could hybridize with the probe DNA to form a double-stranded structure with a 5′-phosphorylated terminus. Then λ-Exo was adopted to digest mononucleotides from the 5′-end, leading to the release of G3 part and miRNA141. The released miRNA could hybridize with another probe to trigger the cycling process, while the released G3 could therefore interact with MB to cause a detectable decrease of diffusion current. The proposed strategy showed a low detection limit of 16 fM and an excellent specificity to discriminate single-base mismatches. Furthermore, this sensor was applied to detect miRNA141 from diluted human serum samples, indicating that it has great potential in the application of nucleic acid detection in real samples.

In-site synthesis of an inorganic-framework molecular imprinted TiO2/CdS heterostructure for the photoelectrochemical sensing of bisphenol A

In this study, we develop a highly sensitive and selective photoelectrochemical (PEC) sensor for bisphenol A (BPA) determination by combining a TiO₂/CdS heterostructure with inorganic framework molecular imprinting (MI) technology. A MI-TiO₂/CdS heterostructure was synthesized via successive ionic layer adsorption combined with an inorganic framework molecular imprinting method. Due to the matched energy level distribution of TiO₂ with CdS, the formed heterojunction promotes photogenerated charge separation and enhanced PEC conversion. The MI-TiO₂/CdS based PEC sensor exhibits higher photocurrent responses and perfect selectivity for BPA under simulated sunlight irradiation. Benefiting from the unique heterostructure and special recognition ability of MI-TiO₂/CdS, the photocurrent is linear to the concentration of BPA (range from 1 to 100 pmol L^-1), with a low limit detection of 0.5 pmol L^-1 (S/N = 3). Meanwhile, the detection results show that the PEC sensor exhibits excellent sensitivity, high selectivity, and good stability. Furthermore, the PEC sensor was successfully applied to the real environmental sample detection of BPA, in lake and river water, domestic wastewater and tap water. This PEC sensor exhibits favourable BPA detection, and it is also a promising method by which to measure other similar environmental substances selectively and sensitively in future work.

Hybridization Chain Reaction-Amplified Electrochemical DNA-Based Sensors Enable Calibration-Free Measurements of Nucleic Acids Directly in Whole Blood

Hybridization chain reaction (HCR) amplification strategy has been extensively explored for the application of electrochemical DNA-based sensors. Despite the enhancement in its sensitivity using the HCR, such sensor platform exhibited significant sensor-to-sensor variations in current due to variations in probe counts and lengths. To circumvent this, we are developing here a calibration-free "O-N" approach to generate a ratiometric, unitless value that is independent of these variations. Specifically, this approach employs two types of redox reporters, denoted as "One reporter" and "N reporters", with the former attached on the capture DNA and the latter on H1 and H2 strands. By optimizing the attachment sites of these reporters onto DNA strands, we demonstrate a significantly enhanced sensitivity of such sensor platform by four orders of magnitude, achieving accurate, calibration-free measurement of nucleic acids including ctDNA directly in undiluted whole blood without the requirement to calibrate each individual sensor.

Calibration curve-free electrochemical quantitation by micro-nano multi-scale gap devices

Quantitation without relying on the calibration curve has long been an issue of overcoming analytical problems accompanied with the inherent limitations of the calibration curve fitting errors. Here, we report on a calibration curve-free method for electrochemical quantitation based on a multi-scale gap device (MGD). The MGD is an integrated device having a series of interdigitated electrodes (IDE) with micro-to-nano gap distances. The device shows a gap-dependent redox current of the analyte when subjected to the electrochemical cycling between the two facing electrodes of its componential IDEs. Based on the fact that the current increases as the gap distance decreases, the analyte concentration could be directly estimated: the rate of increase in the current was directly proportional to the analyte concentration. The calibration curve was not necessary for the quantitation. The accuracy of this MGD approach was better than that of an IDE collection of the same gap distance, which was deteriorated at the larger gap distances particularly. The MGD-based quantitation of dopamine, potassium ferricyanide, and aminophenol was demonstrated in a relatively broad range of concentrations (100 nM-5 mM).

Temperature-Alternated Electrochemical Aptamer-Based Biosensor for Calibration-Free and Sensitive Molecular Measurements in an Unprocessed Actual Sample

Frequently calibrating electrochemical biosensors (ECBs) to obtain acceptable accuracy can be cumbersome for the users. Thus, the achievement of calibration-free operation would effectively lead to commercial applications for ECBs in the real world. Herein, we fabricated a temperature-alternated electrochemical aptamer-based (TAEAB) sensor, producing a cycle of "enhanced-responsive and ∼nonresponsive" state at rapidly alternated interface temperatures (5 and 30 °C, respectively). The ratio of peak currents collected at two temperatures overcomes sensor-to-sensor fabrication variations, obviating sensor calibration prior to use due to its good reproducibility. We then demonstrated the capability of TAEAB sensors for improved, sensitive, and calibration-free measurement of different targets within 7 min, which respectively achieved a detection limit of 0.5 μM procaine in undiluted urine and 1.0 μM adenosine triphosphate in undiluted serum. This generalizable approach ameliorates sensitivity without the complicated amplification step, thus simplifying the operation procedure and reducing the detection time, which will effectively improve the clinical utility of biosensors.

A novel miniaturized homogeneous label-free electrochemical biosensing platform combining integrated microelectrode and functional nucleic acids

A miniaturized platform combining integrated microelectrode (IME) and functional nucleic acids was developed for homogeneous label-free electrochemical biosensing. IME was constructed with a carbon fiber microelectrode and a platinum wire in a θ type glass tube as a two-electrode system for electrochemical monitoring at microliter level. A newly reported G-triplex/methylene blue (G3/MB) complex was used as the signal generator in the homogeneous label-free electrochemical biosensor. G3 has strong affinity with MB and it can cause significant decrease of the diffusion current of MB after binding. Melamine was chosen as the model target. Since melamine can interact with nucleobase thymine (T) to form T-melamine-T structure through complementary hydrogen bonds, a single-strand functional DNA hairpin structure with poly T and G3 elaborately blocked via base pairing was designed. The presence of melamine can trigger the conformation switching of the DNA hairpin to release the G3. The released G3 combined with MB could therefore change the diffusion current, leading to a simple and rapid detection of melamine. The combination of functional DNA hairpin as target recognition element, G3/MB as signal generator, and IME as transducer provided a "Mix and Measure" miniaturized platform for the construction of homogeneous label-free electrochemical biosensors.