Construction of NIR and Ratiometric Fluorescent Probe for Monitoring Carbon Monoxide under Oxidative Stress in Zebrafish

A series of anthracene-derived dyes for Cu2+-assisted CO sensing and bio-imaging: synthesis, performance, and mechanism

Endogenous CO acts as an important messenger for signal transduction and therapeutic effect in the human body. Fluorescent imaging appears to be a promising method for endogenous CO recognition, but traditional luminescent probes based on Pd-complexes suffered from defects of high cost. In this work, four anthracene-derived dyes having an = N-N = group were synthesized for Cu2+-assisted CO sensing. Their molecular structure, photophysical performance and spectral response to Cu2+ and CO were analyzed in detail. The optimal probe showed good selectivity and quenching effect to Cu2+, with PLQY (photoluminescence quantum yield) decreased from 0.33 to 0.04. The quenching mechanism was found as a static quenching mechanism by forming a non-fluorescent complex with Cu2+ (stoichiometric ratio = 1:1), as revealed by single crystal, EPR (electron paramagnetic resonance), and XPS (X-ray photoelectron spectroscopy) analysis. Such quenching effect could be reversed by CO, showing recovered fluorescence, with PLQY recovered to 0.32 within 328 s. Discussion on cellular endogenous CO imaging was included as well.

Comprehensive insights into fluorescent probes for the determination nitric oxide for diseases diagnosis

Nitric oxide (NO) plays an important role in multiple physiological processes of the body involved in regulation, such as cardiovascular relaxation, neural homeostasis, and immune regulation, etc. The real-time monitoring of NO is of great significance in the investigation of related disease mechanisms and the evaluation of pharmacodynamics. Fluorescent probes are considered as a highly promising approach for pharmaceutical analysis and bioimaging due to their non-invasive character, real-time detection, and high sensitivity. However, there are still some challenges in the determination of biological nitric oxide with fluorescent probes, such as low anti-interference ability, poor function modifiability, and low organ specificity. Therefore, it would be beneficial to develop a new generation of fluorescent probes for real-time bioimaging of NO in vivo after this systematic summary.

Fe(III)-Based Fluorescent Probe for High-Performance Recognition, Test Strip Analysis, and Cell Imaging of Carbon Monoxide

Fluorescence sensing and imaging techniques are being widely studied for detecting carbon monoxide (CO) in living organisms due to their speed, sensitivity, and ease of use to biological systems. Most fluorescent probes used for this purpose are based on heavy metal ions like Pd, with a few using elements like Ru, Rh, Ir, Os, Tb, and Eu. However, these metals can be expensive and toxic to cells. There is a need for more affordable and biologically safe fluorescent probes for CO detection. Drawing inspiration from the robust affinity exhibited by heme iron toward CO, in this work, a rhodamine derivative called RBF was developed for imaging CO in living cells by binding to Fe(III) and could be used for CO sensing. A Fe(III)-based fluorescent probe for CO imaging in living cells offers advantages of cost effectiveness, low toxicity, and ease of use. The fluorescence detection using the RBF-Fe system showed a direct correlation with increasing levels of CORM-3 (LOD = 146 nM) or the exposure time of CO gas, displaying reduced fluorescence. A CO test paper based on RBF-Fe was created for simple on-site CO detection, where fluorescence would diminish in response to CO exposure, allowing rapid (2 min) visual identification. Imaging of CO in living cells was successfully conducted using the probe system, showing a decrease in fluorescence intensity as CORM-3 concentrations increased, indicating its effectiveness in monitoring CO levels accurately within living cells.

Visualization of Acrolein Upregulation during Ferroptosis by a Ratiometric Fluorescent Probe

Ferroptosis is a pattern of cell death caused by iron-dependent accumulation of lipid peroxides and is closely associated with the occurrence and development of multiple diseases. Acrolein (ACR), one of the final metabolites of lipid peroxidation, is a reactive carbonyl species with strong biotoxicity. Effective detection of ACR is important for understanding its role in the progression of ferroptosis and studying the specific mechanisms of ferroptosis-mediated diseases. However, visualization detection of ACR during ferroptosis has not yet been reported. In this work, the first ratiometric fluorescent probe (HBT-SH) based on 2-(2'-hydroxyphenyl) benzothiazole (HBT) was designed for tracing endogenous ACR with an unprecedented regiospecific ACR-induced intramolecular cyclization strategy, which employs 2-aminoethanethiol as an ACR-selective recognition receptor. The experimental results showed that HBT-SH has excellent selectivity, high sensitivity (LOD = 0.26 μM) and good biocompatibility. More importantly, the upregulation of ACR levels was observed during ferroptosis in HeLa cells and zebrafish, indicating that ACR may be a specific active molecule that plays an essential biological role during ferroptosis or may serve as a potential marker of ferroptosis, which has great significance for studying the pathological process and treatment options of ferroptosis-related diseases.

A series of triphenylamine-derived fluorophores attached to a Cu-based MOF for gaseous CO optical sensing: synthesis, performance, and mechanism

A series of triphenylamine-derived fluorescent dyes were attached to a Cu2+-containing MOF (metal-organic framework), denoted as Pm@CuMOF. The molecular structures of these dyes were discussed by the single crystal structures. Their major absorption bands peaked at 410-450 nm, showing emission bands ranging from 556 to 586 nm with emission quantum yields ranging from 8.0 to 15.1%. It was found that the [-N(C2H5)2] group generally improved sensing performance, and the -OH group in the dyes helped the Cu2+ quenching effect. Pm@CuMOF was observed by SEM as nanorods with a width of ~100 nm and a length of 300 nm. Their XRD patterns and N2 adsorption/desorption isotherms were recorded to confirm their porous structure. A low probe loading level of ~4% was determined by TGA result. The CO sensing mechanism was revealed as a Cu2+/Cu+-involved sensing mechanism based on the result of NMR titration, IR, XPS, and EPR. The fluorescence of these triphenylamine-derived dyes was firstly quenched by CuMOF. In contact with CO, Cu2+ was reduced to Cu+, accompanied by the release and fluorescence recovery of the fluorescent dyes, showing emission turn-on effect towards CO gas. Pm@CuMOF showed increased emission intensity at CO level of 0.005% (versus N2), with response times ranging from 123 s to 280 s (depending on various temperatures). Good selectivity was observed over competing alkane gases, with stable emission for at least 5 days, but no linear calibration plots were observed.

Azoanthracene-core structure as Cu2+-assisted CO sensing probe: Characterization, performance, and bioimaging

Detection of endogenous CO (carbon monoxide) is an interesting topic in biology because it has been discovered as a messenger for signal transduction and therapeutic effects in vital biological activities. Fluorescence imaging has proven a powerful tool for detecting endogenous CO, which drives the development of low-cost and easy-to-use fluorescent probes. In this study, four azobenzene derivatives (A1, A2, A3, and A4) with various substituents were reported, including their geometric structures, photophysical parameters, and spectral responses to Cu2+ and CO. The relationship between substituent structure and performance was discussed along with Cu2+ quenching and CO sensing mechanisms. The optimal probe (A1), which had no substituent, efficiently quenched fluorescence in the presence of Cu2+, with its PLQY decreased from 0.33 to 0.02, PLQY = photoluminescence quantum yield. Upon CO deoxidization, A1's fluorescence could be recovered (PLQY recovered to 0.32) within 180 s. Its sensing mechanism was static by forming a non-fluorescent complex with Cu2+ (with a stoichiometric ratio of 1:1). The bioimaging performance of A1 for endogenous CO in HeLa cells was reported.

Rational design and comparison of three curcumin-based fluorescent probes for viscosity detection in living cells and zebrafish

Viscosity is a crucial indicator of the cellular microenvironment, which can affect the normal level of cellular metabolism. Aberrant levels of viscosity can result in the emergence of a variety of physiological problems including diabetes, Parkinson's disease, inflammation, etc. Therefore, it is crucial to exploit effective assays that can detect viscosity levels in living cells and organisms. Three new nitrogen-containing heterocyclic fluorescent probes, CNO, CNN and CNNB, were designed and prepared by coupling curcumin with isoxazole, pyrazole, and phenylpyrazole rings, respectively. The fluorescence response properties of these probes to the viscosity level were analyzed in parallel. All the probes, CNO, CNN and CNNB, exhibited a significantly enhanced fluorescence response to viscosity in a broad pH range with excellent photostability, sensitivity and anti-interference ability. The sensing mechanisms of these probes for viscosity were verified by DFT calculations. In addition, these probes were successfully employed for detecting viscosity levels in living HeLa cells and zebrafish. This research compares the viscosity-responsive capabilities of curcumin-based fluorescent probes containing different nitrogen-containing heterocyclic structures, and provides a new design strategy and guidance for developing curcumin-based fluorescent probes for viscosity analysis.

The emergence and advancement of Tsuji-Trost reaction triggered carbon monoxide recognition and bioimaging

Considering that carbon monoxide is both a vital gasotransmitter and an obnoxious gas, tremendous efforts have been dedicated toward its recognition through various methods. However, the fluorescent light-up approach through the exploration of optical markers remains one of the most convenient methods owing to its several advantages. Amongst the different approaches towards the development of CO responsive optically active molecular markers, the Tsuji-Trost reaction-based CO recognition strategy has remained one of the most significant areas of interest across researchers working in this field. However, there have been no attempts to exclusively summarize the commendable work done in this area yet. The current review, therefore, attempts to summarize the developments of various optical probes following this reaction strategy until the year 2022. This review provides detailed mechanistic insights into the Tsuji-Trost mediated CO detection strategy. Besides, discussions on the strategic development and employment of probes based on various allyl derivatives - allyl carbamate/carbonate/ethers - will provide a thorough understanding of the detection method. The significant advancements of the Tsuji-Trost reaction as an interesting strategy that is accepted and extensively explored for monitoring CO in various media including air, aqueous solutions and living systems have been elaborately discussed. Various potential applications and utilization of these developed fluorogenic probes for tracing CO in different living systems have been examined systematically. Moreover, monitoring of exogenous/endogenous CO levels, modulation of intracellular CO concentration under various induced conditions and bioimaging of CO in in vivo models have also been detailed here. Briefly, this review summarizes the current prospects of this detection method and the future directions in related fields.

High-Performance Recognition, Cell-Imaging, and Efficient Removal of Carbon Monoxide toward a Palladium-Mediated Fluorescent Sensing Platform

Novel high-performance fluorescent approaches have always significant demand for room-temperature detection of carbon monoxide (CO), which is highly toxic even at low concentration levels and is not easy to recognize due to its colorless and odorless nature. In this paper, we constructed a palladium-mediated fluorescence turn-on sensing platform (TPANN-Pd) for the recognition of CO at room temperature, revealing simultaneously quick response speed (<30 s), excellent selectivity, superior sensitivity, and low detection limit (∼160 nM for CORM-3, ∼1.7 ppb for CO vapor). Moreover, rapid detection and efficient removal (24%) from the air by naked-eye vision has been successfully realized based on TPANN-Pd supramolecular gels. Furthermore, the developed sensing platform was elucidated with low cytotoxicity and high cellular uptake, and it was successfully applied to CO imaging in living cells, providing real-time monitoring of potential CO-involved reactions in biological systems.

A Zn-coordination polymer for the quantitative and selective colorimetric detection of residual tetracycline in aqueous solution and urine

A one-step solvothermal synthesis provides a functional crystalline one-dimensional Zn-coordination polymer (Zn-CP) with excellent stability in aqueous solution over a wide range of temperature and pH. Zn-CP is a rapid, highly sensitive and selective sensor for detecting tetracycline (TC). Quantitative TC detection is based on the ratio of fluorescence intensities I₅₃₀/I₄₂₀, with a limit of detection (LOD) of 5.51 nM in aqueous solution and 47.17 nM in human urine. The characteristics of colorimetric TC sensing by Zn-CP are highly favorable for application because the color of Zn-CP changes in the visible part of the spectrum from blue-purple to yellow-green upon addition of TC. Conversion of these colors into an RGB signal is simply achieved with an app for the smart phone and provides LODs of 8.04 nM and 0.13 μM TC in water and urine, respectively. Our suggested sensing mechanisms assume that the fluorescence intensity of Zn-CP@TC at 530 nm is enhanced by energy transfer of Zn-CP to TC, while the fluorescence of Zn-CP at 420 nm is quenched by photoinduced electron transfer (PET) from TC to the organic ligand in Zn-CP. These fluorescence properties make Zn-CP a convenient, low-cost, rapid and green detection device for monitoring TC under physiological conditions and in aqueous media.

A simple ratiometric fluorescent probe for two-photon imaging of carbon monoxide in living cells and zebrafish

Carbon monoxide (CO) is an important gas signaling molecule and has been widely involved in regulating important life processes. Effective monitoring of CO in living systems is critical. Combined with the accuracy of ratio detection and the advantages of two-photon imaging, a simple ratiometric two-photon fluorescent probe RTFP was rationally designed and synthesized using 7-(diethylamino)-4-hydroxycoumarin as a two-photon fluorophore and allyl carbonate as the reactive unit. Probe RTFP exhibited excellent selectivity and sensitivity towards CO, and was successfully applied to image endogenous CO in living cells and zebrafish.

Construction of a novel ESIPT and AIE-based fluorescent sensor for sequentially detecting Cu2+ and H2S in both living cells and zebrafish

The development of effective methods for tracking Cu²⁺ and H₂S in living organisms is urgently required due to their vital function in a variety of pathophysiological processes. In this work, a new fluorescent sensor BDF with excited-state intramolecular proton transfer (ESIPT) and aggregation-induced emission (AIE) features for the successive detection of Cu²⁺ and H₂S was constructed by introducing 3,5-bis(trifluoromethyl)phenylacetonitrile into the benzothiazole skeleton. BDF showed a fast, selective and sensitive fluorescence "turn off" response to Cu²⁺ in physiological media, and the situ-formed complex can serve as a fluorescence "turn on" sensor for highly selective detection of H₂S through the Cu²⁺ displacement approach. In addition, the detection limits of BDF for Cu²⁺ and H₂S were determined to be 0.05 and 1.95 μM, respectively. Encouraged by its favourable features, including strong red fluorescence from the AIE effect, large Stokes shift (285 nm), high anti-interference ability and good function at physiological pH as well as a low toxicity, BDF was successfully applied for the consequent imaging of Cu²⁺ and H₂S in both living cells and zebrafish, making it an ideal candidate for detecting and imaging of Cu²⁺ and H₂S in live systems.

High-fidelity fluorescent probes for visualizing the inhibitory behavior of selenium on cadmium uptake in rice

Cadmium (Cd), a widespread and highly toxic environmental contaminant, has seriously impacted the growth of rice and the quality of its products. Hence, it is crucial to monitor and employ robust means to reduce Cd levels in rice, and selenium (Se) has been proven to chelate cadmium ion (Cd²⁺) in rice with rational use. Herein, for the first time, the reported selenocysteine (Sec) probe NN-Sec and the newly designed Cd²⁺ probe SCP were chosen as visualization tools to monitor Sec-inhibited Cd²⁺ uptake in rice. Specifically, reduced fluorescence of rice precultured with Cd²⁺ was observed by SCP after Se application, while similarly decreased fluorescence of rice pretreated with Se was observed by NN-Sec after Cd²⁺ addition. The diminished fluorescence indicated the formation of Cd-Se complexes reduced the Cd²⁺ content in rice. Additionally, it was Cd²⁺ and Se that entered the rice causing the fluorescence generation, as demonstrated by inductively coupled plasma mass spectrometry (ICP-MS). To conclude, the two probes successfully visualized Se inhibited Cd²⁺ uptake in rice, which could provide a robust tool for supporting the development of novel organic fertilizers and reagents to reduce Cd²⁺ content in rice and the environment.

A Turn-On Quinazolinone-Based Fluorescence Probe for Selective Detection of Carbon Monoxide

Carbon monoxide (CO) is a toxic, hazardous gas that has a colorless and odorless nature. On the other hand, CO possesses some physiological roles as a signaling molecule that regulates neurotransmitters in addition to its hazardous effects. Because of the dual nature of CO, there is a need to develop a sensitive, selective, and rapid method for its detection. Herein, we designed and synthesized a turn-on fluorescence probe, 2-(2'-nitrophenyl)-4(3H)-quinazolinone (NPQ), for the detection of CO. NPQ provided a turn-on fluorescence response to CO and the fluorescence intensity at 500 nm was increased with increasing the concentration of CO. This fluorescence enhancement could be attributed to the conversion of the nitro group of NPQ to an amino group by the reducing ability of CO. The fluorescence assay for CO using NPQ as a reagent was confirmed to have a good linear relationship in the range of 1.0 to 50 µM with an excellent correlation coefficient (r) of 0.997 and good sensitivity down to a limit of detection at 0.73 µM (20 ppb) defined as mean blank+3SD. Finally, we successfully applied NPQ to the preparation of a test paper that can detect CO generated from charcoal combustion.

Rational Design of a Dual-Channel Fluorescent Probe for the Simultaneous Imaging of Hypochlorous Acid and Peroxynitrite in Living Organisms

Hypochlorous acid (HOCl) and peroxynitrite (ONOO^-) are two important highly reactive oxygen/nitrogen species, which commonly coexist in biosystems and play pivotal roles in many physiological and pathological processes. To investigate their function and correlations, it is urgently needed to construct chemical tools that can track the production of HOCl and ONOO^- in biological systems with distinct fluorescence signals. Here, we found that the coumarin fluorescence of coumarin-benzopyrylium (CB) hydrazides (spirocyclic form) is dim, and their fluorescence properties are controlled by their benzopyran moiety via an intramolecular photo-induced electron transfer (PET) process. Based on this mechanism, we report the development of a fluorescent probe CB2-H for the simultaneous detection of HOCl and ONOO^-. ONOO^- can selectively oxidize the hydrazide group of CB2-H to afford the parent dye CB2 (Abs_max/Em_max = 631/669 nm). In the case of HOCl, it undergoes an electrophilic attack on the benzopyran moiety of CB2-H to give a chlorinated product CB2-H-Cl, which inhibits the PET process within the probe and thus affords a turn-on fluorescence response at the coumarin channel (Abs_max/Em_max = 407/468 nm). Due to the marked differences in absorption/emission wavelengths between the HOCl and ONOO^- products, CB2-H enables the concurrent detection of HOCl and ONOO^- at two independent channels without spectral cross-interference. CB2-H has been applied for dual-channel fluorescence imaging of endogenously produced HOCl and ONOO^- in living cells and zebrafish under different stimulants. The present probe provides a useful tool for further exploring the distribution and correlation of HOCl and ONOO^- in more biosystems.

A Review for In Vitro and In Vivo Detection and Imaging of Gaseous Signal Molecule Carbon Monoxide by Fluorescent Probes

Carbon monoxide (CO) is a vital endogenous gaseous transmitter molecule involved in the regulation of various physiological and pathological processes in living biosystems. In order to investigate the biological function of CO, many technologies have been developed to monitor the level of endogenous CO in biosystems. Among them, the fluorescence detection technology based on the fluorescent probe has the advantages of high sensitivity, excellent selectivity, simple operation, especially non-invasive damage to biological samples, and the possibility of real-time in situ detection, etc., which is considered to be one of the most effective and applicable detection techniques. Therefore, in the last few years, a lot of work has been carried out on the design, synthesis and in vivo fluorescence imaging studies of CO fluorescent probes. Furthermore, using fluorescent probes to detect the changes in CO concentrations in living cells and tissues as well as in organisms has been one of the hot research topics in recent years. However, it is still a challenge to rationally design CO fluorescent probe with excellent optical performance, structural stability, low background interference, good biocompatibility, and excellent water solubility. Therefore, this review focuses on the research progress of CO fluorescent probes in the detection mechanism and biological applications in recent years. However, this popular and leading topic has rarely been summarized comprehensively to date. Thus, the research progress of CO fluorescent probes in recent years is reviewed in terms of their design concept, detection mechanism, and their biological applications. In addition, the relationship between the structure and performance of the probes was also discussed. More significantly, we hope that more excellent optical properties fluorescent probes for gaseous transmitter molecule CO detection and imaging will overcome the current problems of high biotoxicity and limited water solubility in future.

Deep-Depth Imaging of Hepatic Ischemia/Reperfusion Injury Using a Carbon Monoxide-Activated Upconversion Luminescence Nanosystem

Exploring a chemical imaging tool for visualizing the endogenous CO biosignaling molecule is of great importance in understanding the pathophysiological functions of CO in complex biological systems. Most of the existing CO fluorescent probes show excitation and emission in the region of ultraviolet and visible light, which are not suitable for application in in vivo deep-depth imaging of CO. Herein, a new near-infrared (NIR) to NIR upconversion luminescence (UCL) nanosystem for in vivo visualization of CO was developed, which possesses the merits of high selectivity and sensitivity, a deep tissue penetration depth, and a high signal-to-noise ratio. In this design, upon interaction with CO, the maxima absorption peak of the nanosystem showed a significant blue shift from 795 nm to 621 nm and triggered a remarkable turn-on NIR UCL signal due to the luminescence resonance energy transfer process. Leveraging this nanosystem, we achieved an NIR UCL visualization of the generation of CO biosignals caused by hypoxic, acute inflammation, or ischemic injury in living cells, zebrafish, and mice. Moreover, the protective effect of CO in zebrafish models of oxygen and glucose deprivation/reperfusion (OGD/R) and mice models of lipopolysaccharide-induced oxidative stress (LOS) and hepatic ischemia/reperfusion (HI/R) was also further verified. Therefore, this work discloses that the nanosystem not only serves as a promising nanoplatform to study biological signaling pathways of CO in pathophysiological events, but may also provide a powerful tool for HI/R injury diagnosis.

Mitochondria-targetable colorimetric and far-red fluorescent sensor for rapid detection of SO2 derivatives in food samples and living cells

Sulfur dioxide (SO₂) derivatives are intertwined with many physiological and pathological processes in living systems, and excess intake of them are associated with various diseases. Herein, we have rationally constructed a novel colorimetric and far-red fluorescent probe for HSO₃^- based on a rhodamine analogue skeleton bearing a 3-quinolinium carboxaldehyde moiety. The novel probe exhibited a significant far-red fluorescence "Turn-on" response to HSO₃^-, along with obvious color change from reddish to purple via the specific 1,4-nucleophilic addition reaction of HSO₃^- with the quinolinium moiety in 3-(4-(2-carboxyphenyl)-7-(diethylamino)chromenylium-2-yl)-1-methylquinolin-1-ium hypochlorite trifluoromethanesulfonate (AQCB). The AQCB had excellent water-solubility, and presented rapid response (<15 s),highsensibility(LOD = 49 nM) and selectivity toward HSO₃^-. In addition, the probe was able to detect the content of HSO₃^- in food samples with satisfactory results. Furthermore, the probe possessed good cell membrane and could be successfully applied for imaging HSO₃^- in the mitochondria of living cells.

Strategy for Detecting Carbon Monoxide: Cu2+-Assisted Fluorescent Probe and Its Applications in Biological Imaging

Herein, a novel strategy was proposed for identifying carbon monoxide (CO), which plays a crucial part in living systems. For the first time, we have managed to design, synthesize, and characterize successfully this new Cu²⁺-assisted fluorescent probe (DPHP) in detecting CO. Compared with the commonly adopted Pd⁰-mediated Tsuji-Trost reaction recognition method, such a new strategy did not engage costly palladium (II) salt and generated no leaving group, indicating a satisfactory anti-interference ability. The recognition mechanism was confirmed by IR, ¹H NMR titration, HR-MS, cyclic voltammetry, X-ray photoelectron spectroscopy, electron paramagnetic resonance, and optical properties. Surprisingly, it was found that the new method achieved high selectivity and rapid identification of CO with a lower limit of detection (1.7 × 10^-8 M). More intriguingly, it could recognize endogenous and exogenous CO in HeLa cells. The cytotoxicity of this new method was so low that it allowed the detection of CO in mice and zebrafish. Basically, our results trigger a novel viewpoint of rationally designing and synthesizing advanced materials for CO detection with unique features, impelling new research in detection chemistry.

Natural flavylium-inspired far-red to NIR-II dyes and their applications as fluorescent probes for biomedical sensing

Fluorescent probes that emit in the far-red (600-700 nm), first near-infrared (NIR-I, 700-900 nm), and second NIR (NIR-II, 900-1700 nm) regions possess unique advantages, including low photodamage and deep penetration into biological samples. Notably, NIR-II optical imaging can achieve tissue penetration as deep as 5-20 mm, which is critical for biomedical sensing and clinical applications. Much research has focused on developing far-red to NIR-II dyes to meet the needs of modern biomedicine. Flavylium compounds are natural colorants found in many flowers and fruits. Flavylium-inspired dyes are ideal platforms for constructing fluorescent probes because of their far-red to NIR emissions, high quantum yields, high molar extinction coefficients, and good water solubilities. The synthetic and structural diversities of flavylium dyes also enable NIR-II probe development, which markedly advance the field of NIR-II in vivo imaging. In the last decade, there have been huge developments in flavylium-inspired dyes and their applications as far-red to NIR fluorescent probes for biomedical applications. In this review, we highlight the optical properties of representative flavylium dyes, design strategies, sensing mechanisms, and applications as fluorescent probes for detecting and visualizing important biomedical species and events. This review will prompt further research not only on flavylium dyes, but also into all far-red to NIR fluorophores and fluorescent probes. Moreover, this interest will hopefully spillover into applications related to complex biological systems and clinical treatments, ranging in focus from the sub-organelle to whole-animal levels.

Near-Infrared Fluorescent Probe with Large Stokes Shift for Imaging of Hydrogen Sulfide in Tumor-Bearing Mice

Hydrogen sulfide (H₂S) is an important endogenous gas signal molecule in living system, which participates in a variety of physiological processes. Very recent evidence has accumulated to show that endogenous H₂S is closely associated with various cancers and can be regarded as a biomarker of cancer. Herein, we have constructed a new near-infrared fluorescent probe (DCP-H₂S) based on isophorone-xanthene dye for sensing hydrogen sulfide (H₂S). The probe shows remarkable NIR turn-on signal at 770 nm with a large Stokes shift of 200 nm, together with high sensitivity (15-fold) and rapid detection ability for H₂S (4 min). The probe also possesses excellent selectivity for H₂S over various other analytes including biothiols containing sulfhydryl (-SH). Moreover, DCP-H₂S has been successfully applied to visualize endogenous and exogenous H₂S in living cells (293T, Caco-2 and CT-26 cells). In particular, the excellent ability of DCP-H₂S to distinguish normal mice and tumor mice is shown, and it is expected to be a powerful tool for detection of H₂S in cancer diagnosis.

Golgi-Targeting Fluorescent Probe for Monitoring CO-Releasing Molecule-3 In Vitro and In Vivo

CO-releasing molecule-3 (CORM-3), mainly metal carbonyl compounds, is widely used as experimental tools to deliver CO, a biological "gasotransmitter", in mammalian systems. CORM-3 is also proposed as a potential new antimicrobial agent, which kills bacteria effectively and rapidly in vitro and in animal models. Organelle-targeting therapy, as a highly effective therapeutic strategy with little toxic and side effects, has important research significance and development prospects. Therefore, the development of effective methods for detecting and tracking CORM-3 at the subcellular level has important implications. In this paper, an easily available Golgi-targetable fluorescent probe (Golgi-Nap-CORM-3) was proposed for CORM-3 detection. In the probe Golgi-Nap-CORM-3, the phenyl sulfonamide group was selected as the Golgi-targetable unit, naphthalimide dye was chosen as a fluorophore, and the nitro group was selected as a CORM-3-responsive unit. Golgi-Nap-CORM-3 shows a CORM-3-reponsive increase of fluorescence emission at 520 nm. Using the excellent probe, the change of CORM-3 in HeLa cells, HepG2 cells, and zebrafish is successfully monitored. This study demonstrates very important information for the study of CORM-3 in vivo systems.

A Critical Review on Organic Small Fluorescent Probes for Monitoring Carbon Monoxide in Biology

Endogenous carbon monoxide (CO) is an important intracellular gas messenger that is intimately involved in many physiological and pathological processes. The abnormal concentration of CO in living organisms can cause many diseases. Therefore, it is of great significance to monitor CO in biological samples. Fluorescent probe technology provides an effective and convenient method for CO monitoring, with the advantages of high selectivity and sensitivity, fast response time and in situ fluorescence imaging in biological tissues, which is favored by the majority of researchers. In this paper, the research progress of CO fluorescent probes since 2018 is reviewed, and the design, detection mechanism and biological application of the related fluorescent probes are summarized. And the relationship between the structure and performance of the probes is discussed. Furthermore, the development trend and application prospect of CO fluorescent probes are prospected.

Activity-based fluorescent probes for sensing and imaging of Reactive Carbonyl species (RCSs)

This review explains various strategies for developing fluorescent probes to detect reactive carbonyl species (RCS). There are sevaral number of mono and diacarbonyls among 30 varieties of reactive carbonyl species (RCSs) so far discovered, which play pivotal roles in pathological processes such as cancer, neurodegenerative diseases, cardiovascular disease, renal failure, and diabetes mellitus. These RCSs play essential roles in maintaining ion channels regulation, cellular signaling pathways, and metabolisms. Among RCSs, Carbon moxide (CO) is also utilized for its cardioprotective, anti-inflammatory, and anti-apoptotic effects. Fluorescence-based non-invasive optical tools have come out as one of the promising methods for analyzing the concentrations and co-localizations of these small metabolites. There has been a tremendous eruption in developing fluorescent probes for selective detection of specific RCSs within cellular and aqueous environments due to its high sensitivity, high spatial and temporal resolution of fluorescence imaging. Fluorescence-based sensing mechanisms such as intramolecular charge transfer (ICT), photoinduced electron transfer (PeT), excited-state intramolecular proton transfer (ESIPT), and fluorescence resonance energy transfer (FRET) are described. In particular, probes for dicarbonyls such as methylglyoxal (MGO), malondialdehyde (MDA), along with monocarbonyls that include formaldehyde (FA), carbon monoxide (CO) and phosgene are discussed. One of the most exciting advances in this review is the summary of fluorescent probes of dicarbonyl compounds.

Dual-Targeting into the Mitochondria of Cancer Cells for Ratiometric Investigation of the Dynamic Fluctuation of Sulfur Dioxide and Formaldehyde with Two-Photon Integrated Semiconducting Polymer Dots

Mitochondrial sulfur dioxide (SO₂) and formaldehyde (FA) in cancer cells serve as important signal molecules in mediating multiple physiological and pathological activities. Accurate monitoring of the dynamic fluctuation of SO₂ and FA in the mitochondria of cancer cells is important for insight into their relationships and functions in cancer, understanding cancer mechanism, and the role of mitochondrial homeostasis in cancer invasion and metastasis. Herein, a novel integrated two-photon semiconducting polymer dot (BF@Pdots) with dual-targeting (cancer cells and mitochondrial) and dual-emission in green and red regions, which is rationally designed through a four-step engineering strategy by using two newly synthesized functionalized polymers PFNA and FD-PSMA as precursors, has been developed for accurate tracking of the dynamic variation of SO₂ and FA in the mitochondria of cancer cells. The sensing mechanism is on the basis of the fluorescence resonance energy transfer (FRET) process in BF@Pdots tuned by the reversible Michael addition reaction between the sensing-groups and SO₂ (or FA). The integrated BF@Pdots nanoprobes display excellent performances in the accurate detection of the dynamic fluctuation of SO₂ and FA such as precise positioning in the mitochondria of cancer cells, self-calibrating ratiometric, two-photon emission with long wavelength excitation, and fast reversible response. The BF@Pdots nanoprobes are also applied to the ratiometric detection of the dynamic fluctuation of exogenous and endogenous SO₂ and FA in the mitochondria of cancer cells for the first time with satisfactory results. Taken together, this work will provide an attractive way to develop versatile integrated Pdots-based fluorescent probes through flexible molecular engineering for applications in accurate imaging of biomolecules in living systems.

Turn-on silicon-based fluorescent probe for visualizing endogenous CO during hypoxia

A turn-on fluorescent probe for the fast imaging of endogenous CO has been developed and applied under different stimuli and hypoxia.

A NIR-emissive probe with a remarkable Stokes shift for CO-releasing molecule-3 detection in cells and in vivo

A NIR-emitting probe with a remarkable Stokes shift for detecting CO-releasing molecule-3 in living cells and in vivo.

Targeted and activatable nanosystem for fluorescent and optoacoustic imaging of immune-mediated inflammatory diseases and therapy via inhibiting NF-κB/NLRP3 pathways

Immune-mediated inflammatory diseases (IMIDs) represent a diverse group of diseases and challenges remain for the current medications. Herein, we present an activatable and targeted nanosystem for detecting and imaging IMIDs foci and treating them through blocking NF-κB/NLRP3 pathways. A ROS-activatable prodrug BH-EGCG is synthesized by coupling a near-infrared chromophore with the NF-κB/NLRP3 inhibitor epigallocatechin-3-gallate (EGCG) through boronate bond which serves as both the fluorescence quencher and ROS-responsive moiety. BH-EGCG molecules readily form stable nanoparticles in aqueous medium, which are then coated with macrophage membrane to ensure the actively-targeting capability toward inflammation sites. Additionally, an antioxidant precursor N-acetylcysteine is co-encapsulated into the coated nanoparticles to afford the nanosystem BH-EGCG&NAC@MM to further improve the anti-inflammatory efficacy. Benefiting from the inflammation-homing effect of the macrophage membrane, the nanosystem delivers payloads (diagnostic probe and therapeutic drugs) to inflammatory lesions more efficiently and releases a chromophore and two drugs upon being triggered by the overexpressed in-situ ROS, thus exhibiting better theranostic performance in the autoimmune hepatitis and hind paw edema mouse models, including more salient imaging signals and better therapeutic efficacy via inhibiting NF-κB pathway and suppressing NLRP3 inflammasome activation. This work may provide perceptions for designing other actively-targeting theranostic nanosystems for various inflammatory diseases.

An Activatable Probe with Aggregation-Induced Emission for Detecting and Imaging Herbal Medicine Induced Liver Injury with Optoacoustic Imaging and NIR-II Fluorescence Imaging

Whilte herbal medicines are widely used for health promotion and therapy for chronic conditions, inappropriate use of them may cause adverse effects like liver injury, and accurately evaluating their hepatotoxicity is of great significance for public health. Herein, an activatable probe QY-N for diagnosing herbal-medicine-induced liver injury by detecting hepatic NO with NIR-II fluorescence and multispectral optoacoustic tomography (MSOT) imaging is demonstrated. The probe includes a bismethoxyphenyl-amine-containing dihydroxanthene serving as electron donor, a quinolinium as electron acceptor, and a butylamine as recognition group and fluorescence quencher. The hepatic level of NO reacts with butylamine, thereby generating the activated probe QY-NO which exhibits a red-shifted absorption band (700-850 nm) for optoacoustic imaging and generates strong emission (910-1110 nm) for NIR-II fluorescence imaging. QY-NO is aggregation-induced-emission (AIE) active, which ensures strong emission in aggregated state. QY-N is utilized in the triptolide-induced liver injury mouse model, and experimental results demonstrate the QY-N can be activated by hepatic NO and thus be used in detecting herbal-medicine-induced liver injury. The temporal and spatial information provided by three-dimensional MSOT images well delineates the site and size of liver injury. Moreover, QY-N has also been employed to monitor rehabilitation of liver injury during treatment process.

Rational design of AIE-based fluorescent probes for hypochlorite detection in real water samples and live cell imaging

As one kind of important disinfectant and reactive oxygen species (ROS), hypochlorite (ClO^-), plays vital roles in both water treatment and cell homeostasis. In this work, by decorating a series of groups with different electron donating and withdrawing properties on tetraphenylethene (TPE), four aggregation-induced emission (AIE)-based fluorescent probes containing C˭C double bonds as the potential reaction sites named Probe A, B, C and D were constructed, and their sensing performance for ClO^- was systematically studied. The results showed that the substituents can not only effectively tune the photophysical properties of the probes, but also make a significant impact on their sensing performance for ClO^-. Combined with the theoretical calculation results, it can be inferred that the reactivity of the probes for ClO^- can be greatly enhanced with the increase of electron cloud density on the C˭C double bonds by the introduction of strong electron-donating group (EDG) and electron-withdrawing group (EWG) adjacent to the double bonds. Finally, the best performing Probe D was selected and then successfully applied to ClO^- detection in real water samples and live cell imaging.

Development of a one-step synthesized red emission fluorescent probe for sensitive detection of viscosity in vitro and in vivo

Diseases caused by metabolic abnormalities, such as inflammation and fatty liver, which are characterized by high viscosity, so it is necessary to detect the change of viscosity in vivo and in vitro. Due to the advantages of high sensitivity, noninvasive detection, high selectivity and real-time imaging, fluorescence imaging has become an effective means to detect biological parameters of biomolecules and life systems. Therefore, we have prepared a red emitting fluorescent probe NBI-V with easy synthesis which can ensure that the probe can be developed for the widely used to detection of viscosity changes in vivo and in vitro. The probe NBI-V has good stability, high response times, selectivity, and good biocompatibility. As the viscosity of a water-glycerol system increased from 1.29 cp to 937.48 cp, the fluorescence of NBI-V was increased by about 77 times. Biological experiments showed that the probe NBI-V can target mitochondria, and the Pearson correlation coefficient was as high as 0.89. What's more, it can distinguish normal liver from fatty liver, and can detect the viscosity changes caused by inflammation in mice.

A novel p-dimethylaminophenylether-based fluorescent probe for the detection of native ONOO- in cells and zebrafish

Peroxynitrite (ONOO^-) is a highly reactive substance, and plays an essential part in maintaining cellular homeostasis. It is crucial to monitor the ONOO^- level in cells in normal and abnormal states. We introduced a p-dimethylaminophenylether-based fluorescent probe PDPE-PN, which could be synthesized readily. The new probe had prominent sensitivity and specificity, and a fast response towards ONOO^-. The spectral performance of probe PDPE-PN was outstanding and the limit of detection was 69 nM. Probe PDPE-PN with low toxicity was applied to detect endogenous/exogenous ONOO^- in RAW 264.7 macrophages and zebrafish. Importantly, successful application of the new receptor opens up new ideas for the design of ONOO^- probes.