"Dual Signal-On" Split-Type Aptasensor for TNF-α: Integrating MQDs/ZIF-8@ZnO NR Arrays with MB-Liposome-Mediated Signal Amplification

A liposome encapsulated methylene blue-mediated electrochemical and UV-visible dual mode split-type immunoassay for the detection of 17β-estradiol

Herein, we fabricated an electrochemical (EC) and UV-visible absorption (UV-vis) dual mode split-type immunoassay for the detection of 17β-estradiol (E2), which was mediated by liposome encapsulated methylene blue (MB@lip). MB molecule acted as the probe in the EC and UV-vis absorption dual mode detections, and its release was controlled by liposome. The competitive immune recognition was conducted between the E2 in the sample and E2 conjugated bovine serum protein (E2-BSA) adsorbed on the 96-wells plate in combining with E2 antibody labeled with MB@lip (E2-Ab/MB@lip). MB molecule could be released from the resulting immune composite of E2-BSA/E2-Ab/MB@lip in the presence of Triton X-100, and quantified by UV-vis and EC methods. The three-dimensional cross-linked reduced graphene oxide/Ti3C2 (3D-rGO/Ti3C2) aerogel was prepared through hydrothermal method, then complexed with the electroactive anthraquinone (AQ) and used as the electrode modified material. The AQ/3D-rGO/Ti3C2 composite had high surface area and provided abundant adsorption sites for MB, and the displacement/competitive behavior between AQ and MB could dexterously achieve the ratiometric EC detection of E2. In addition, the inherent blue color of MB allowed it to be analyzed by UV-vis absorption method. The proposed dual mode detection method exhibited broad linear ranges of 0.1 pg mL-1 to 50 ng mL-1 (by UV-vis) and 0.03 pg mL-1 to 50 ng mL-1 (by EC) for E2 detection, and the detection limits were 0.023 pg mL-1 (S/N = 3) and 8.0 fg mL-1 (S/N = 3), respectively. Moreover, the proposed immunoassay exhibited good practicability and was applied to monitor E2 in milk and serum successfully.

Near-infrared light-induced homogeneous photoelectrochemical biosensor based on 3D walking nanomotor-assisted CRISPR/Cas12a for ultrasensitive microRNA-155 detection

The dysregulation of microRNA (miRNA) expression levels is intricately linked to a myriad of human diseases, and the precise and delicate detection thereof holds paramount significance in the realm of clinical diagnosis and therapy. Herein, a near-infrared (NIR) light-mediated homogeneous photoelectrochemical (PEC) biosensor was constructed for miRNA-155 detection based on NaYF4: Yb, Tm@ZnIn2S4 (NYF@ ZIS) coupled with a three-dimensional (3D) walking nanomotor-assisted CRISPR/Cas12a strategy. The upconverted light emitted by the NYF in the visible and UV region upon NIR light excitation could be utilized to excite ZIS to produce a photocurrent response. The presence of target miRNA-155 initiated an amplification reaction within the 3D walking nanomotor, resulting in the production of multiple nucleic acid fragments. These fragments could activate the collateral cleavage capability of CRISPR/Cas12a, leading to the indiscriminate cleavage of single-stranded DNA (ssDNA) on ALP-ssDNA-modified magnetic beads and the subsequent liberation of alkaline phosphatase (ALP). The released ALP facilitated the catalysis of ascorbic acid 2-phosphate to generate ascorbic acid as the electron donor to capture the photogenerated holes on the NYF@ZIS surface, resulting in a positively correlated alteration in the photocurrent response. Under optimal conditions, the NIR light-initiated homogeneous PEC biosensor had the merits of good linear range (0.1 fM to 100 pM), an acceptable limit of detection (65.77 aM) for miRNA-155 detection. Considering the pronounced sensitivity, light stability, and low photodamage, this strategy presents a promising platform for detecting various other miRNA biomarkers in molecular diagnostic practice.

Advances in heart failure monitoring: Biosensors targeting molecular markers in peripheral bio-fluids

Cardiovascular diseases (CVDs), especially chronic heart failure, threaten many patients' lives worldwide. Because of its slow course and complex causes, its clinical screening, diagnosis, and prognosis are essential challenges. Clinical biomarkers and biosensor technologies can rapidly screen and diagnose. Multiple types of biomarkers are employed for screening purposes, precise diagnosis, and treatment follow-up. This article provides an up-to-date overview of the biomarkers associated with the six main heart failure etiology pathways. Plasma natriuretic peptides (BNP and NT-proBNP) and cardiac troponins (cTnT, cTnl) are still analyzed as gold-standard markers for heart failure. Other complementary biomarkers include growth differentiation factor 15 (GDF-15), circulating Galactose Lectin 3 (Gal-3), soluble interleukin (sST2), C-reactive protein (CRP), and tumor necrosis factor-alpha (TNF-α). For these biomarkers, the electrochemical biosensors have exhibited sufficient sensitivity, detection limit, and specificity. This review systematically summarizes the latest molecular biomarkers and sensors for heart failure, which will provide comprehensive and cutting-edge authoritative scientific information for biomedical and electronic-sensing researchers in the field of heart failure, as well as patients. In addition, our proposed future outlook may provide new research ideas for researchers.

Construction of smartphone-adapted signal visualization platform for dual-mode detection of H2S based on integrated metal-organic framework nanoprobes

Hydrogen sulfide (H2S) is a toxic contaminant and has great influence on many physiological processes. Due to various pathophysiological roles and environmental pollution problems, it is necessary to construct and develop simple and portable monitoring sensors for the precise detection of H2S. Herein, we developed a smartphone-adapted dual-mode detection platform by integrating the colorimetric and photothermal imaging analysis into a metal-organic framework-based chip (ZIF-8/Cu). Due to the nanoconfinement effect of ZIF-8, small-sized plasmonic CuS could be in-situ formed during the detection procedure of H2S and endowed the chips with excellent photothermal properties. By constructing a smartphone-adapted photothermal imager, the metal-organic framework-based chip could achieve a portable photothermal imaging analysis of H2S. Moreover, as the formed CuS was a good peroxidase-like nanozyme, the chips could also be used to trigger the enzymic catalytic reaction toward the chromogenic reaction of 3,3',5,5'-tetramethylbenzidine (TMB)-H2O2, thus providing another colorimetric sensing mode by using a smartphone App. In this smartphone-adapted visualization platform, the portable chemosensors could simultaneously achieve double detection modes at one electrode, which provided a new pathway for the accurate detection of H2S and circumvented the false-positive or negative errors during the detection process. Besides, by using the finite difference time domain (FDTD) simulation method, the in-depth mechanism, including the plasmonic effect and spatial electromagnetic field distribution, was explored to provide a possible reason for the excellent sensing performance of the dual-mode visualization platform. This work provides a new insight into the construction of the accurate, portable and smart sensing platform in the visual screening of H2S.

Photocurrent-polarity switching between methylene blue-loaded liposome and iodine-doped BiOCl for in-situ amplified immunoassay

This work designed a liposome-mediated photocurrent polarity switching immunosensor depending on the reversed photocurrent of iodine-doped BiOCl (I-BOC) nanoflowers induced by the released methylene blue (MB) for the detection of prostate-specific antigen (PSA). Initially, MB-loaded liposomes as indicators were confined within the microplates to participate in the sandwiched immunoreaction and lysed under the treatment of Triton X-100 to release numerous MB. Owing to the host-guest recognition between β-cyclodextrin (β-CD) and MB, the released MB was immobilized on the β-CD-modified I-BOC/FTO electrode and triggered the photocurrent polarity reversal from cathodic photocurrent to anodic photocurrent. The sensing platform realized an accurate and sensitive assay of PSA due to the effective elimination of false-positive/negative signals in a linear range of 0.02-50 ng mL-1 with a limit of detection of 12 pg mL-1. Furthermore, this work not only conjugated liposome-assisted signal amplification strategy with the photocurrent polarity switching system but also provided a novel pathway for various protein determinations.

Integrating Reliable Pt-S Bond-Mediated 3D DNA Nanomachine with Magnetic Separation in a Homogeneous Electrochemical Strategy for Exosomal MicroRNA Detection with Low Background and High Sensitivity

Precise and sensitive analysis of exosomal microRNA (miRNA) is of great importance for noninvasive early disease diagnosis, but it remains a great challenge to detect exosomal miRNA in human blood samples because of their small size, high sequence homology, and low abundance. Herein, we integrated reliable Pt-S bond-mediated three-dimensional (3D) DNA nanomachine and magnetic separation in a homogeneous electrochemical strategy for the detection of exosomal miRNA with low background and high sensitivity. The 3D DNA nanomachine was easily prepared via a facile and rapid freezing method, and it was capable of resisting the influence of biothiols, thus endowing it with high stability. Notably, the as-developed magnetic 3D DNA nanomachine not only enabled the detection system to have a low background but also coupled with liposome nanocarriers to synergistically amplify the current signal. Consequently, by ingeniously combining the low background and multiple signal-amplification strategies in homogeneous electrochemical biosensing, highly sensitive detection of exosomal miRNA was successfully achieved. More significantly, with good anti-interference ability, the as-proposed method could effectively discriminate plasma samples from cancer patients and healthy subjects, thus showing a high potential for application in the nondestructive early clinical diagnosis of disease.

An ultrasensitive photoelectrochemical assay for tumor necrosis factor-alpha based on hollow CdS cubes as a signal generator and NiCo2O4-Au as a signal extinguisher

Sensitive detection of tumor necrosis factor-alpha (TNF-α) in human serum is beneficial for finding cancer patients early due to overexpressed TNF-α being related to some cancers. Here, a photoelectrochemical (PEC) aptasensor was constructed for ultrasensitive TNF-α assay based on the signal generator of hollow CdS cubes (H-CdS) and the signal extinguishing activity of NiCo2O4-Au. In this work, compared with traditional solid CdS, H-CdS could greatly promote the PEC signal because its hollow structure could accelerate the separation of photogenerated charges, which also possesses abundant active sites and high light absorption capability. Moreover, H-CdS can be prepared facilely with Cd-based Prussian blue analogs as the precursor. Meanwhile, NiCo2O4-Au was fabricated and utilized as a signal extinguisher. In the presence of TNF-α, NiCo2O4-Au could be introduced onto the H-CdS modified electrode, producing competitive consumption of the electron donor effect, the p-n semiconductor quenching effect, and the mimetic enzymatic catalytic precipitation effect, which all can significantly reduce the PEC signal. Based on the signal extinguishing activity of NiCo2O4-Au and the signal generator of H-CdS, TNF-α can be detected sensitively with a lower detection limit (0.63 fg mL-1) and a wide linear range (1 fg mL-1- to 1 ng mL-1), which may have a potential application in the PEC bioanalysis field and the disease diagnostics field.

Dual-Modal Biosensor for Staphylococcus aureus Detection Based on a Porphyrin-Based Porous Organic Polymer FePor-TPA with Excellent Peroxidase-like, Catalase-like, and Photoelectrochemical Properties

Bacterial infections seriously harm human health and cause many severe diseases, which triggered urgent demands to exploit specific and sensitive biosensor strategies for Staphylococcus aureus detection. Here, a colorimetric and photoelectrochemical dual-mode biosensor for S. aureus assay based on FePor-TPA was constructed. 2D FePor-TPA thin film and its bulk powder (FePor-TPA) were synthesized by in situ growth on ITO and a solvothermal condition, respectively, both of which exhibited excellent peroxidase-like and catalase-like activity, originating from their metalloporphyrin linkers. Benefiting from the in situ growth on ITO electrodes, the 2D FePor-TPA thin film also possessed a more ordered stacking mode and in turn exhibited good electrical conductivity, stable initial photocurrent, and high sensitivity to O2. As for bulk FePor-TPA, its porous structure and high specific surface area make it a possible scaffold to load an amount of AuNPs, the rabbit anti-Staphylococcus aureus Rosenbach tropina antibody (Ab2), and GOx for constructing the signal probe (GOx/Ab2@Au@FePor-TPA) and realizing catalytic amplification. With these satisfactory features in mind, the 2D FePor-TPA thin film and its bulk powder (FePor-TPA) were utilized to construct a dual and signal-on bioplatform for sensitively and selectively detecting S. aureus, which, as far as we know, has not been reported.

Small-Molecule Probe-Induced In Situ-Sensitized Photoelectrochemical Biosensor for Monitoring α-Glucosidase Activity

Semiconductor-based photoelectrochemical (PEC) biosensors have garnered significant attention in the field of disease diagnosis and treatment. However, the recognition units of these biosensors are mainly limited to bioactive macromolecules, which hinder the photoelectric response due to their insulating characteristics. In this study, we develop an in situ-sensitized strategy that utilizes a small-molecule probe at the interface of the photoelectrode to accurately detect α-glucosidase (α-Glu) activity. Silane, a prototype small-molecule probe, was surface-modified on graphitic carbon nitride to generate Si nanoparticles upon reacting with hydroquinone, the enzymatic product of α-Glu. The in situ formed heterojunction enhances the light-harvesting property and photoexcited carrier separation efficiency. As a result, the in situ-sensitized PEC biosensor demonstrates excellent accuracy, a low detection limit, and outstanding anti-interference ability, showing good applicability in evaluating α-Glu activity and its inhibitors in human serum samples. This novel in situ sensitization approach using small-molecule probes opens up new avenues for developing simple and efficient PEC biosensing platforms by replacing conventional biorecognition elements.

Dual-mode colorimetric and homogeneous electrochemical detection of intracellular/extracellular H2O2 based on FeSx/SiO2 nanoparticles with high peroxidase-like activity

Abnormal expression of hydrogen peroxide (H₂O₂) elucidates cell dysfunctions and might induce the occurrence and deterioration of various diseases. However, limited by its ultralow level under pathophysiological conditions, intracellular and extracellular H₂O₂ was difficult to be detected accurately. Herein, a colorimetric and homogeneous electrochemical dual-mode biosensing platform was constructed for intracellular/extracellular H₂O₂ detection based on FeS_x/SiO₂ nanoparticles (FeS_x/SiO₂ NPs) with high peroxidase-like activity. In this design, FeS_x/SiO₂ NPs were synthesized with excellent catalytic activity and stability compared to natural enzymes, which improved the sensitivity and stability of sensing strategy. 3,3',5,5'-Tetramethylbenzidine (TMB), as a multifunctional indicator, was oxidized in the presence of H₂O₂, generated color changes and realized visual analysis. In this process, the characteristic peak current of TMB decreased, which could realize the ultrasensitive detection of H₂O₂ by homogeneous electrochemistry. Accordingly, by integrating visual analysis ability of colorimetry and the high sensitivity of homogeneous electrochemistry, the dual-mode biosensing platform exhibited high accuracy, sensitivity and reliability. The detection limits of H₂O₂ were 0.2 μM (S/N = 3) for the colorimetric method and 2.5 nM (S/N = 3) for the homogeneous electrochemistry assay. Therefore, the dual-mode biosensing platform provided a new opportunity for highly accurate and sensitive detection of intracellular/extracellular H₂O₂.

Integration of phosphate functionalized Pt/TiO2 and Ru(bpy)32+ sensitization for ultrasensitive assay of adenosine deaminase activity on a novel split-typed PEC aptasensor

To date, it is still a challenge for high-performance photoelectrochemical (PEC) assay of low-abundance adenosine deaminase (ADA) in fundamental research and clinical diagnosis. Herein, phosphate-functionalized Pt/TiO₂ (termed PO₄^3-/Pt/TiO₂) was prepared as ideal photoactive material to develop a split-typed PEC aptasensor for detection of ADA activity, coupled by a Ru(bpy)₃²⁺ sensitization strategy. We critically studied the effects of the PO₄^3- and Ru(bpy)₃²⁺ on the detection signals, and discussed the signal-amplified mechanism. Specifically, hairpin-structured adenosine (AD) aptamer was splited into single chain via ADA-induced catalytic reaction, and subsequently hybridized with complementary DNA (cDNA, initially coating on magnetic beads). The in-situ formed double-stranded DNA (dsDNA) was further intercalated by more Ru(bpy)₃²⁺ to amplify the photocurrents. The resultant PEC biosensor showed a broader linear range of 0.05-100 U L^-1 and a lower limit of detection (0.019 U L^-1), which can fill the blank for analysis of ADA activity. This research would provide some valuable insights for building advanced PEC aptasensors in ADA-related research and clinical diagnosis.

Recent advances in electrochemical nanomaterial-based aptasensors for the detection of cancer biomarkers

New technologies have provided suitable tools for rapid diagnosis of cancer which can reduce treatment costs and even increase patients' survival rates. Recently, the development of electrochemical aptamer-based nanobiosensors has raised great hopes for early, sensitive, selective, and low-cost cancer diagnosis. Here, we reviewed the flagged recent research (2021-2023) developed as a series of biosensors equipped with nanomaterials and aptamer sequences (nanoaptasensors) to diagnose/prognosis of various types of cancers. Equipping these aptasensors with nanomaterials and using advanced biomolecular technologies have provided specified biosensing interfaces for more optimal and reliable detection of cancer biomarkers. The primary intention of this review was to present and categorize the latest innovations used in the design of these diagnostic tools, including the hottest surface modifications and assembly of sensing bioplatforms considering diagnostic mechanisms. The main classification is based on applying various nanomaterials and sub-classifications considered based on the type of analyte and other vital features. This review may help design subsequent electrochemical aptasensors. Likewise, the up-to-date status, remaining limitations, and possible paths for translating aptasensors to clinical cancer assay tools can be clarified.

Dual-Mode Electrochemical Competitive Immunosensor Based on Cd2+/Au/Polydopamine/Ti3C2 Composite and Copper-Based Metal-Organic Framework for 17β-Estradiol Detection

Herein, a dual-mode electrochemical competitive immunosensor was constructed for the detection of 17β-estradiol (E2) based on differential pulse voltammetry (DPV) and chronoamperometry (i-t). During the immune recognition process, the E2 antibody (E2-Ab) was immobilized on the Cd²⁺/Au/polydopamine/Ti₃C₂ (Cd²⁺/Au/pDA/Ti₃C₂) composite-modified electrode; then, the E2-conjugated bovine serum albumin (E2-BSA) was labeled with a copper-based metal-organic framework (Cu-MOF) and competed with E2 in combining the E2-Ab. The Cu-MOF was not only an electroactive species but also possessed good electrocatalytic activity toward H₂O₂. Thus, E2 could be quantified according to the peak current change of the Cu-MOF in DPV curve or the variation of H₂O₂ reduction current. For DPV quantification, Cd²⁺ was introduced as an internal reference in this case, and a highly reproducible ratio readout was obtained. The as-prepared dual-mode E2 electrochemical immunosensor showed good linear relationship in the ranges of 1 pg mL^-1-10 ng mL^-1 (DPV) and 10 pg mL^-1-10 ng mL^-1 (i-t), and the detection limits were 0.47 and 5.4 pg mL^-1 (S/N = 3), respectively. Furthermore, the dual-mode electrochemical immunosensor exhibited good practicability in real sample analysis.

Dual-Signaling Photoelectrochemical Biosensor Based on Biocatalysis-Induced Vulcanization of Bi2MoO6 Nanosheets

A magnetic-assisted photoelectrochemical (PEC) and colorimetric (CL) dual-modal biosensing platform with high precision was established to monitor prostate-specific antigen (PSA) based on Bi₂MoO₆ nanosheets (BMO) by coupling the aptamer-guided hybridization chain reaction (HCR) with the hydrolysate-induced vulcanization reaction of Bi₂MoO₆ nanosheets. Upon addition of PSA, trigger DNA (tDNA) was released by the interaction between the target analyte and the aptamer and then further hybridized with anchor DNA (aDNA) conjugated on magnetic beads (MBs). The as-released tDNA initiated the target-assisted HCR in the presence of two alternating hairpin sequences (Bio-H1 and Bio-H2) to produce nicked long double-stranded DNA on the surface of MBs, where numerous alkaline phosphatase (ALP) enzymes could assemble with MBs through the biotin-avidin reaction, resulting in the hydrolysis of sodium thiophosphate (TP) to H₂S. The as-produced H₂S reacted with BMO to form vulcanized BMO (BMO-S), thus leading to obvious enhanced PEC performance under visible light with the color change from light yellow to brown. Having optimized the test conditions, the magnetic-assisted biosensing system holds a good quantitative diagnosis sensitivity area in a range of 5.0 pg mL^-1-100 ng mL^-1 with a calculated detection limit down to 3.5 pg mL^-1. Meanwhile, a visual colorimetric assay on basis of the change in the color of the materials was also realized. Given the exceptional performance of the constructed biosensor, it may possess great promise as an advanced bioanalytical tool for practical applications.

Integrating Ti3C2/MgIn2S4 heterojunction with a controlled release strategy for split-type photoelectrochemical sensing of miRNA-21

The harsh operating conditions and time-consuming fabrication process of the photoelectrode modification process have limited the potential applications of photoelectrochemical (PEC) sensors. To overcome these drawbacks, this study introduced a unique split-type PEC biosensor for microRNA-21 (miRNA-21) detection. Specifically, a Ti₃C₂/MgIn₂S₄ heterojunction was adopted as the photosensitive material, and a target-controlled glucose release system, comprising a multifunctional porphyrin-based metal-organic framework (PCN-224), was used for signal amplification. The Ti₃C₂/MgIn₂S₄ heterojunction effectively separated the photogenerated electrons and holes, and improved the photoelectric conversion efficiency, offering a strong initial photocurrent signal during PEC biosensing. Meanwhile, the porous PCN-224 acted as a nimble nanocontainer that encapsulated glucose using a capture probe (CP). In the presence of miRNA-21, the CP formed a CP-miRNA-21 complex and then detached from PCN-224, controllably releasing the trapped glucose. The oxidization of glucose by glucose oxidase resulted in hydrogen peroxide generation, which acted as a scavenger for the holes generated on the surface of Ti₃C₂/MgIn₂S₄, and significantly enhanced the photocurrent response under visible light irradiation. Finally, the sensor exhibited good performance for miRNA-21 detection with a low detection limit (0.17 fM) and wide linearity range (0.5 fM-1.0 nM). Thus, the proposed Ti₃C₂/MgIn₂S₄-based split-type PEC sensor is a promising tool for sensitive and accurate detection of miRNA-21 and provides an innovative basis for the preparation of other high-performance sensors.

Zinc-Air Battery-Assisted Self-Powered PEC Sensors for Sensitive Assay of PTP1B Activity Based on Perovskite Quantum Dots Encapsulated in Vinyl-Functionalized Covalent Organic Frameworks

The self-powered sensors have attracted widespread attention in the analysis field due to a huge demand of point-of-care testing (POCT) in the early diagnosis of diseases. However, the output voltage of the reported self-powered sensors is always small, resulting in a narrow linear detection range and low assay sensitivity. Herein, a self-powered photoelectrochemical (PEC) sensor with zinc-air batteries as a power source was developed for activity assay of protein tyrosine phosphatase 1B (PTP1B) based on perovskite quantum dots encapsulated in the vinyl-functionalized covalent organic framework (COF-V). CsPbBr₃ nanocrystals were stabilized by the confinement effect of the COF-V cage without aggregation, and the resulting CsPbBr₃@COF-V composite was used as the cathodic photoelectric material to construct the zinc-air battery with a large open-circuit voltage (OCV, 1.556 V). Before PTP1B activity assay, an auxiliary peptide-polyamidoamine-phosphopeptide (P2-PAMAM-P1) hybrid was introduced into the photocathode via thiol-ene click reaction between the thiol group on the P1 and the vinyl group on the COF-V. The steric hindrance effect of the P1-PAMAM-P2 hybrid inhibited the PEC performance of the photocathode, resulting in a small OCV of the zinc-air battery. When the PTP1B existed, PTP1B-catalyzed dephosphorylation of tyrosine on P1 facilitated the cleavage process of P1 by chymotrypsin, leading to the removal of the P2-PAMAM-P1 hybrid from the photocathode and consequently the enhancement of the OCV. Therefore, the activity of PTP1B was sensitively detected. The developed self-powered PEC sensor showed superior performance for PTP1B activity assay (broad linear response range, 0.1 pM to 10 nM and low detection limit, 0.032 pM) due to the large output voltage of the constructed zinc-air battery and has great potential in POCT of protein phosphatase-related diseases and the discovery of protein phosphatase-targeted drugs.

Designing Triangular Silver Nanoplates with GSH/GSSG Surface Mixed States as Novel Nanoparticle-based Redox Mediators for Electrochemical Biosensing

Herein, a dual signal-quenched electrochemical (EC) biosensing strategy utilizing surface-engineered trisodium citrate (TSC)-glutathione (GSH)/oxidized glutathione (GSSG)-capped triangular silver nanoplates (Tri-Ag NPs_TSC-GSH/GSSG) as a novel nanoparticle-based redox mediator was explored for biomarker determination. In contrast with conventional redox mediators, Tri-Ag NPs_TSC-GSH/GSSG provided more admirable EC performance along with a lower oxidation potential (∼0.14 V). Taking advantage of the split-type mode, the immune response in a 96-well microplate was independent from EC detection, which could effectively eliminate the biological interference and thereby greatly enhance the sensitivity. As for the surface engineering process of Tri-Ag NPs, it was composed of partial GSH replacement and the formation of the GSH/GSSG surface mixed state. Primarily, the signal response of Ag NPs_TSC-GSH decreased due to the hindrance of GSH on electron transfer. Moreover, varying proportions of GSH/GSSG could further impede the oxidation process of Tri-Ag NPs_TSC-GSH/GSSG and eventually realize efficient dual signal quenching of this system. Notably, the ZIF-67@MIL-88B-GO_x nanocomposite as the label was applied for a cascade reaction system with GSH peroxidase-like activities to form the optimal GSH/GSSG proportion, causing sensitive changes in signal response with a range of different antigen concentrations. On this basis, the fabricated biosensor provided measurable outputs of aflatoxin B1 concentrations in a linear range of 0.0005-50 ng/mL with a low detection limit of 0.61 pg/mL (S/N = 3). All of the results indicated that the novel biosensor could be a promising analytical tool for future biomarker detection.

Electroanalytical point-of-care detection of gold standard and emerging cardiac biomarkers for stratification and monitoring in intensive care medicine - a review

Determination of specific cardiac biomarkers (CBs) during the diagnosis and management of adverse cardiovascular events such as acute myocardial infarction (AMI) has become commonplace in emergency department (ED), cardiology and many other ward settings. Cardiac troponins (cTnT and cTnI) and natriuretic peptides (BNP and NT-pro-BNP) are the preferred biomarkers in clinical practice for the diagnostic workup of AMI, acute coronary syndrome (ACS) and other types of myocardial ischaemia and heart failure (HF), while the roles and possible clinical applications of several other potential biomarkers continue to be evaluated and are the subject of several comprehensive reviews. The requirement for rapid, repeated testing of a small number of CBs in ED and cardiology patients has led to the development of point-of-care (PoC) technology to circumvent the need for remote and lengthy testing procedures in the hospital pathology laboratories. Electroanalytical sensing platforms have the potential to meet these requirements. This review aims firstly to reflect on the potential benefits of rapid CB testing in critically ill patients, a very distinct cohort of patients with deranged baseline levels of CBs. We summarise their source and clinical relevance and are the first to report the required analytical ranges for such technology to be of value in this patient cohort. Secondly, we review the current electrochemical approaches, including its sub-variants such as photoelectrochemical and electrochemiluminescence, for the determination  of important CBs highlighting the various strategies used, namely the use of micro- and nanomaterials, to maximise the sensitivities and selectivities of such approaches. Finally, we consider the challenges that must be overcome to allow for the commercialisation of this technology and transition into intensive care medicine.

Signal-on photoelectrochemical immunoassay for salivary cortisol based on silver nanoclusters-triggered ion-exchange reaction with CdS quantum dots

Nowadays, the epidemic, employment, and academic pressures are seriously affecting our physical and mental health. Herein, we designed a magneto-controlled photoelectrochemical immunosensor for noninvasive monitoring of salivary cortisol regarded as a pressure biomarker. A competitive immunoassay model was established by coupling bovine serum albumin-cortisol modified magnetic beads (MB-BSA-cortisol) with silver nanoclusters (Ag NCs)-labelled anti-cortisol antibody, and quantity analysis was operated by photoelectrochemical measurement of the CdS/Au electrode as an ion-exchange platform. Accompanying the formation of immune complexes, the carried Ag NCs were readily dissolved with nitric acid to produce abundant silver ions, which transferred to the electrode for ion-exchange reaction with CdS quantum dots to produce Ag₂S, a new electron–hole capture site, leading to a decrease in the photocurrent intensity. The photocurrent signal gradually recovered with the increase of concentration of target cortisol, acquiring the signal-on mode competitive immunosensing system, which is propitious to the detection of small molecules. Within optimal conditions, this sensor had a satisfactory linear relationship in the range of 0.0001–100 ng mL⁻¹ with favorable repeatability, specificity, and acceptable method accuracy. The detection limit was as low as 0.06 pg mL⁻¹. In addition, this strategy provided new thought for the test of other small-molecule analytes and immunosensor applied in the complex biological system.

Current progress in aptamer-based sensing tools for ultra-low level monitoring of Alzheimer's disease biomarkers

Alzheimer's disease (AD) as common late-life dementia is pathologically associated with the irreversible and progressive disorder, misfolding, deposition, and accumulation of the brain proteins. Especially, the formation of fibrous amyloid plaques by aggregation of amyloid-β peptides is the pathological cause of this neurologic disorder disease. Besides, tau protein isoforms destabilize the microtubule filaments through post-translational modifications and induce nerve cells' death. Amyloid-β peptides and tau proteins are considered as the critical symptom and reliable molecular biomarkers for the early diagnosis of AD. AD is characterized by impaired thinking proficiencies, cognitive decline, memory loss, and behavioral disability. Since there is no efficacious therapy for AD at present, the development of precise sensing tools for the early diagnosis of this disease is essential and crucial. Aptamer-based biosensors (aptasensors) have acquired utmost importance in the field of AD healthcare, due to excellent sensitivity and specificity, ease-of-use, cost-effectiveness, portability, and rapid assay time. Here, we highlight the recent developments and novel perspectives in the field of aptasensor design to quantitatively monitor the AD biomarkers. Finally, some results are represented to achieve a promising viewpoint for introducing the novel aptasensor test kits in the future.

Competitive Displacement Triggering DBP Photoelectrochemical Aptasensor via Cetyltrimethylammonium Bromide Bridging Aptamer and Perovskite

Here, a label-free perovskite-based photoelectrochemical (PEC) aptasensor was rationally designed for the displacement assay of dibutyl phthalate (DBP), a well-known endocrine disruptor, with the aid of cetyltrimethylammonium bromide (CTAB). In this method, CTAB significantly enhanced the PEC response and humidity resistance of the CH₃NH₃PbI₃ perovskite by forming a protecting layer and passivating the X- and A-sites vacancies of CH₃NH₃PbI₃. In addition, CTAB facilitated the immobilization of an aptamer through van der Waals and hydrophobicity forces, as well as the electrostatic interactions between the phosphate group of the aptamer and the cationic group of CTAB. When exposed to DBP in the affinity solution, the DBP aptamer was released from the electrode because the affinity between DBP and its aptamer competes with the interaction of the aptamer and CTAB. The displacement of the aptamer from the perovskite surface relieves the block effect and thus enhances the photoelectric signal of perovskite. By virtue of the good photoelectrochemical characters of CH₃NH₃PbI₃ and the specific recognition ability of aptamer, the linear range of the PEC sensor was 1.0 × 10^-13 to 1.0 × 10^-8 M and the detection and quantification limits were down to 2.5 × 10^-14 and 8.2 × 10^-14 M (S/N = 3), respectively. This work offers a novel strategy for designing aptasensors for the detection of various targets and exhibits the marvelous potential of organic-inorganic perovskite in the field of PEC analysis.

MOF-derivated MnO@C nanocomposite with bidirectional electrocatalytic ability as signal amplification for dual-signal electrochemical sensing of cancer biomarker

Dual-signal strategy has great potential in improving the accuracy and sensitivity of cancer biomarker determination. However, most sensors based on nanomaterials as signal amplification usually output single detectable signal. It is still a challenge to achieve dual-signal sensing of biomarkers with nanomaterials as signal amplification. Herein, MnO@C nanocomposite was prepared with Mn-MOF-74 as precursor by pyrolysis. It possesses bidirectional electrocatalytic ability toward both oxidation and reduction of H₂O₂ for its fully exposed crystal facets. After loading AuNPs, MnO@C@AuNPs can connect aptamer (Apt) via Au-S and then as a signal amplification for the construction of sandwich-type aptasensor for dual-signal electrochemical sensing of cancer biomarker. Thus, taking mucin 1 (MUC1) as a model system. The aptasensor has the parallel output of differential pulse voltammetry (DPV) and chronoamperometry responses based on oxidation and reduction of H₂O₂, respectively, which implemented sensitive and accurate measurements to avoid false results. The linear response ranges of 0.001 nM-100 nM (detection limit of 0.31 pM) for DPV technique and 0.001 nM-10 nM (detection limit of 0.25 pM) for chronoamperometry technique were obtained. It opens up a new way to design elegant dual-signal aptasensors with potential applications in early disease diagnosis.

Highly Selective and Sensitive microRNA-210 Assay Based on Dual-Signaling Electrochemical and Photocurrent-Polarity-Switching Strategies

Highly sensitive and selective microRNA (miRNA) assay is of great significance for disease diagnosis and therapy. Herein, a magnetic-assisted electrochemistry (EC)-photoelectrochemistry (PEC) dual-mode biosensing platform was developed for miRNA-210 detection based on dual-signaling EC and photocurrent-polarity-switching PEC strategies. Porous magnetic Fe₃O₄ octahedra with a large surface area were synthesized by calcining Fe-based metal-organic frameworks. Subsequently, the magnetic photoelectric materials (Fe₃O₄@CdS) were developed by the successive ionic layer adsorption and reaction method in Cd²⁺ and S^2- solutions. Then, the self-assembled DNA nanoprisms contained three thiols/hanging arms that could capture miRNA-210 efficiently and were anchored to the Fe₃O₄@CdS octahedra via the Cd-S bond. When miRNA-210 was present, the double-stranded DNA concatemers [the self-assembled duplex helixes based on a pair of methylene blue (MB)-labeled single-stranded DNAs (AP1 and AP2) through the hybridization chain reaction and then intercalated with adriamycin (Dox) into their grooves] were connected with the Fe₃O₄@CdS-DNA nanoprisms. MB and Dox not only acted as the electrochemical probes but also synergistically switched the photocurrent polarity of the Fe₃O₄@CdS octahedra. Thus, miRNA-210 was assayed sensitively and selectively via the proposed EC-PEC dual-mode biosensing platform. Additionally, the abovementioned recognition steps occurred in a homogeneous system, and the effects of the impurities and interferences on the miRNA-210 assay could be easily avoided by magnetic separation due to the good magnetic properties of Fe₃O₄ octahedra. The proposed EC-PEC dual-mode biosensing platform showed a wide range of potential applications in bioanalysis and early diagnosis of disease.

Electrochemical Microfluidic Paper-Based Aptasensor Platform Based on a Biotin-Streptavidin System for Label-Free Detection of Biomarkers

Timely and rapid detection of biomarkers is extremely important for the diagnosis and treatment of diseases. However, going to the hospital to test biomarkers is the most common way. People need to spend a lot of money and time on various tests for potential disease detection. To make the detection more convenient and affordable, we propose a paper-based aptasensor platform in this work. This device is based on a cellulose paper, on which a three-electrode system and microfluidic channels are fabricated. Meanwhile, novel nanomaterials consisting of amino redox graphene/thionine/streptavidin-modified gold nanoparticles/chitosan are synthesized and modified on the working electrode of the device. Through the biotin-streptavidin system, the aptamer whose 5'end is modified with biotin can be firmly immobilized on the electrode. The detection principle is that the current generated by the nanomaterials decreases proportionally to the concentration of targets owing to the combination of the biomarker and its aptamer. 17β-Estradiol (17β-E2), as one of the widely used diagnostic biomarkers of various clinical conditions, is adopted for verifying the performance of the platform. The experimental results demonstrated that this device enables the determination of 17β-E2 in a wide linear range of concentrations of 10 pg mL^-1 to 100 ng mL^-1 and the limit of detection is 10 pg mL^-1 (S/N = 3). Moreover, it enables the detection of targets in clinical serum samples, demonstrating its potential to be a disposable and convenient integrated platform for detecting various biomarkers.

Liposomal Controlled Release Ag-Activated DNAzyme Cycle Amplification on a 2D Pyrene COF-Based Photocathode for α-Synuclein Immunosensing

Ultrasensitive and accurate monitoring of ultralow-level biomarkers is imperiously needed in clinical diagnosis. So far, exploring high-performance photocathodes and developing new sensing strategies have remained central challenges in photoelectrochemical bioassays. Herein, a two-dimensional (2D) pyrene covalent organic framework (COF, PAF-130) is exemplified for the first time as a high-performance photocathode for precise immunosensing of α-synuclein (α-Syn) by integrating a DNAzyme-induced signal cycle amplification strategy with Ag nanoparticles (NPs)-mediated liposomal immunoassay. Through sequential immunobinding, lysis treatment, and acidolysis, numerous Ag⁺ ions are released, and then they activate the DNAzyme, which further recycles the cleavage of hairpin DNA (HDNA) on the photoelectrode and induces signal cycle amplification. As a result, an ultralow detection limit (3.6 fg/mL) and a wide linear range (10^-5-10³ ng/mL) are achieved, which surpass those of most methods reported so far. The proposed sensing approach can be readily extended to detect various biomarkers by substituting the biorecognition events, providing great promise for biomedical and related applications.