Recombinase Polymerase Amplification Coupled with a Photosensitization Colorimetric Assay for Fast Salmonella spp. Testing

Field-Deployable Colorimetric Array for On-Site Diagnosis of Urinary Tract Infection and Identification of Causative Pathogens

Urinary tract infection (UTI) is a common and prevalent disease caused by a spectrum of pathogens. Lack of access to rapid, portable, and high-quality diagnostics in resource-limited settings aggravates the improper treatment of UTIs, which is also a major driver of antibiotic misuse worldwide. Here, we describe a custom-made portable colorimetric array (PoCA) for reading out polymerase chain reaction (PCR) amplicons, the rationale of which is to transfer the previously developed dsDNA-based photosensitization colorimetric assay (solution) onto paper discs for detection. By integrating mini-LED irradiation and paper discs, the PoCA can read out 96 PCR tests in one pot, thus allowing diagnosis and identification of 12 prevailing UTI pathogens in less than 2 h, coupled with a portable thermal cycler for PCR. After analyzing 200 clinical urine samples, the pathogen profiling accuracy of the PoCA was demonstrated to be higher than the standard urine culture (confirmed with metagenomic next-generation sequencing). The PoCA platform could be used in primary care for rapid UTI diagnosis and pathogen identification.

Recombinase Polymerase Amplification and Target-Triggered CRISPR/Cas12a Assay for Sensitive and Selective Hepatitis B Virus DNA Analysis Based on Lanthanide Tagging and Inductively Coupled Plasma Mass Spectrometric Detection

Herein, we report a target-triggered CRISPR/Cas12a assay by coupling lanthanide tagging and inductively coupled plasma mass spectrometry (ICP-MS) for highly sensitive elemental detection. Hepatitis B virus (HBV) DNA was chosen as a model analyte, and recombinase polymerase amplification (RPA) was used for target amplification. The double-stranded RPA amplicons containing a 5' TTTG PAM sequence can be recognized by Cas12a through a specific CRISPR RNA, activating the trans-cleavage activity of CRISPR/Cas12a and nonspecific cleavage of terbium (Tb)-ssDNA modified on magnetic beads (MBs). Following magnetic separation and acid digestion, the released Tb3+ ions were quantitated by ICP-MS and correlated to the concentration of HBV DNA. Taking advantage of the accelerated cleavage of Tb-ssDNA attached to the MB particles, RPA for target amplification, and ICP-MS for highly selective signal readout, this method permits the detection of 1 copy/μL of HBV DNA in serum with high specificity and holds great promise in the early diagnosis of viral infections or tumor development.

Specific detection of gut pathogens for one-pot chip based on RPA-CRISPR/Cas12a

BACKGROUND

There are billions of bacteria in the intestine, most of which are harmless and play important roles in humans. Although only a very small number of bacteria can cause diseases, once the pathogenic bacteria are ingested into the body and multiply in large quantities, it can lead to inflammatory diseases in the intestines and even other organs. Although polymerase chain reaction can specifically detect bacterial nucleic acid. However, the demand for temperature cycling limits its portability. Therefore, it is hoped to establish a high-throughput, highly specific and portable detection platform for directly detecting nucleic acid of intestinal pathogens.

RESULTS

Herein, a one-pot chip based on RPA-CRCISPR/Cas12a platform was developed. The chip is the same size as a glass slide and allows detection at the same temperature. Multiple samples could be detected simultaneously on the one chip, achieved high-throughput detection and improved the integration of detection. The specific recognition of CRISPR/Cas12a avoided the influence of non-specific amplification of RPA and enhanced the specificity of the analysis. At the same time, the one-pot chip avoided secondary contamination when the lid was opened during the analysis process. And the bacterial concentration showed good linearity at 102-108 cfu mL-1. The limit of detection could be as low as 0.43 cfu mL-1. This method has been successfully used to detect pollution samples. It can provide a reliable platform for early screening of gastrointestinal and other inflammatory diseases.

SIGNIFICANCE

The one-pot chip based on the RPA-CRISPR/Cas12a platform established can directly detect the nucleic acid of intestinal pathogens, with portability and specificity. It is worth noting that the platform has good programmability, can be used for other target detection by changing crRNA and RPA primers, it can achieve multi sample detection on the one chip.

Research progress of loop-mediated isothermal amplification in the detection of Salmonella for food safety applications

Salmonella, the prevailing zoonotic pathogen within the Enterobacteriaceae family, holds the foremost position in global bacterial poisoning incidents, thereby signifying its paramount importance in public health. Consequently, the imperative for expeditious and uncomplicated detection techniques for Salmonella in food is underscored. After more than two decades of development, loop-mediated isothermal amplification (LAMP) has emerged as a potent adjunct to the polymerase chain reaction, demonstrating significant advantages in the realm of isothermal amplification. Its growing prominence is evident in the increasing number of reports on its application in the rapid detection of Salmonella. This paper provides a systematic exposition of the technical principles and characteristics of LAMP, along with an overview of the research progress made in the rapid detection of Salmonella using LAMP and its derivatives. Additionally, the target genes reported in various levels, including Salmonella genus, species, serogroup, and serotype, are summarized, aiming to offer a valuable reference for the advancement of LAMP application in Salmonella detection. Finally, we look forward to the development direction of LAMP and expect more competitive methods to provide strong support for food safety applications.

A Low-Cost Handheld Centrifugal Microfluidic System for Multiplexed Visual Detection Based on Isothermal Amplification

A low-cost, handheld centrifugal microfluidic system for multiplexed visual detection based on recombinase polymerase amplification (RPA) was developed. A concise centrifugal microfluidic chip featuring four reaction units was developed to run multiplexed RPA amplification in parallel. Additionally, a significantly shrunk-size and cost-effective handheld companion device was developed, incorporating heating, optical, rotation, and sensing modules, to perform multiplexed amplification and visual detection. After one-time sample loading, the metered sample was equally distributed into four separate reactors with high-speed centrifugation. Non-contact heating was adopted for isothermal amplification. A tiny DC motor on top of the chip was used to drive steel beads inside reactors for active mixing. Another small DC motor, which was controlled by an elaborate locking strategy based on magnetic sensing, was adopted for centrifugation and positioning. Visual fluorescence detection was optimized from different sides, including material, surface properties, excitation light, and optical filters. With fluorescence intensity-based visual detection, the detection results could be directly observed through the eyes or with a smartphone. As a proof of concept, the handheld device could detect multiple targets, e.g., different genes of African swine fever virus (ASFV) with the comparable LOD (limit of detection) of 75 copies/test compared to the tube-based RPA.

Integrating Recombinase Polymerase Amplification and Photosensitization Colorimetric Detection in One Tube for Fast Screening of C. sakazakii in Formula Milk Powder

Cronobacter sakazakii (C. sakazakii) is a widely existing opportunistic pathogen and thus threatens people with low immunity, especially infants. To prevent the outbreak, a rapid and accurate on-site testing method is required. The current standard culture-based method is time-consuming (3-4 days), while the nucleic acid amplification (PCR)-based detection is mostly carried out in central laboratories. Herein, isothermal recombinase polymerase amplification (RPA) coupled with a photosensitization colorimetric assay (PCA) was adopted for the on-site detection of C. sakazakii in powdered infant formulas (PIFs). The lowest visual detection concentration of C. sakazakii is 800 cfu/mL and 2 cfu/g after 8 h bacteria pre-enrichment. Furthermore, to avoid typical cap opening-resulted aerosol pollution, the PCA reagents were lyophilized onto the cap of the RPA tube (containing lyophilized RPA reagents). After amplification, the tube was subjected to simple shaking to mix the PCA reagents with the amplification products for light-driven color development. Such a one-tube assay offered a lowest concentration of 1000 copies of genomic DNA of C. sakazakii within 1 h. After 8 h of bacterial enrichment, the lowest detecting concentration could be pushed down to 5 cfu/g bacteria in PIF. To facilitate on-site monitoring, a portable, battery-powered PCA device was designed to mount the typical RPA 8-tube strip, and a color analysis cellphone APP was further employed for facile readout.

Isothermal amplification-based microfluidic devices for detecting foodborne pathogens: a review

The gold standard for nucleic acid amplification-based diagnosis is the polymerase chain reaction (PCR). The PCR recognizes the targets such as foodborne pathogens by amplifying their specific genes. The integration of nucleic acid amplification-based assays on microfluidic platforms represents a highly promising solution for convenient, cheap, and effective control of foodborne pathogens. However, the application of the PCR is limited to on-site detection because the method requires sophisticated equipment for temperature control, which makes it complicated for microfluidic integration. Alternatively, isothermal amplification methods are promising tools for integrating microfluidic platforms for on-site detection of foodborne pathogens. This review summarized advances in isothermal amplification-based microfluidic devices for detecting foodborne pathogens. Different nucleic acid extraction approaches and the integration of these approaches in microfluidic platforms were first reviewed. Microfluidic platforms integrated with three common isothermal amplification methods including loop-mediated isothermal amplification, recombinase polymerase amplification, and recombinase-aided amplification were then described and discussed.

An LF-NMR homogeneous immunoassay for Vibrio parahaemolyticus based on superparamagnetic 2D nanomaterials

In this work, a sensitive low field nuclear magnetic resonance (LF-NMR) homogeneous immunoassay, also called magnetic resonance switch (MRSw) sensor, for Vibrio parahaemolyticus (VP) was developed. Superparamagnetic 2D nanomaterial was designed and used as the magnetic probe of MRSw sensor. It was GO@SPIONs&Ab, a composite nanomaterial with many superparamagnetic Fe3O4 nanoparticles (SPIONs) providing a magnetic signal and VP antibody (Ab) specifically recognizing the target VP evenly distributed on the surface of GO. The presence of VP controllably changed the aggregation state of the probe, eliminating the uncertainty of MRSw sensor type, and thus then achieving a regular variation of transverse relaxation time T2 and ensuing quantitative detection of VP. Triple signal enhancement of the MRSw sensor was obtained due to the application of the designed 2D probe, by increasing the number of SPIONs, improving the magnetic intensity and susceptibility, and forming a synergistic effect. Under optimized experimental conditions, VP could be detected with satisfied sensitivity, selectivity, precision, accuracy, and stability, even in turbid real samples. LOQ for VP was 10 CFU/mL. This detection principle is widely applicable, providing an idea for the construction of highly sensitive MRSw sensors.

Recent Advances in Design and Application of Nanomaterials-Based Colorimetric Biosensors for Agri-food Safety Analysis

A colorimetric sensor detects an analyte by utilizing the optical properties of the sensor unit, such as absorption or reflection, to generate a structural color that serves as the output signal to detect an analyte. Detecting the refractive index of an analyte by recording the color change of the sensor structure on its surface has several advantages, including simple operation, low cost, suitability for onsite analysis, and real-time detection. Colorimetric sensors have drawn much attention owing to their rapidity, simplicity, high sensitivity and selectivity. This Review discusses the use of colorimetric sensors in the food industry, including their applications for detecting food contaminants. The Review also provides insight into the scope of future research in this area.

Recombinase Polymerase Amplification-Based Biosensors for Rapid Zoonoses Screening

Recent, outbreaks of new emergency zoonotic diseases have prompted an urgent need to develop fast, accurate, and portable screening assays for pathogen infections. Recombinase polymerase amplification (RPA) is sensitive and specific and can be conducted at a constant low temperature with a short response time, making it especially suitable for on-site screening and making it a powerful tool for preventing or controlling the spread of zoonoses. This review summarizes the design principles of RPA-based biosensors as well as various signal output or readout technologies involved in fluorescence detection, lateral flow assays, enzymatic catalytic reactions, spectroscopic techniques, electrochemical techniques, chemiluminescence, nanopore sequencing technologies, microfluidic digital RPA, and clustered regularly interspaced short palindromic repeats/CRISPR-associated systems. The current status and prospects of the application of RPA-based biosensors in zoonoses screening are highlighted. RPA-based biosensors demonstrate the advantages of rapid response, easy-to-read result output, and easy implementation for on-site detection, enabling development toward greater portability, automation, and miniaturization. Although there are still problems such as high cost with unstable signal output, RPA-based biosensors are increasingly becoming one of the most important means of on-site pathogen screening in complex samples involving environmental, water, food, animal, and human samples for controlling the spread of zoonotic diseases.

A rapid and visual detection of Staphylococcus haemolyticus in clinical specimens with RPA-LFS

Staphylococcus haemolyticus (S. haemolyticus), which is highly prevent in the hospital environment, is an etiological factor for nosocomial infections. Point-of-care rapid testing (POCT) of S. haemolyticus is not possible with the currently used detection methods. Recombinase polymerase amplification (RPA) is a novel isothermal amplification technology with high sensitivity and specificity. The combination of RPA and lateral flow strips (LFS) can achieve rapid pathogen detection, enabling POCT. This study developed an RPA-LFS methodology using a specific probe/primer pair to identify S. haemolyticus. A basic RPA reaction was performed to screen the specific primer from 6 primer pairs targeting mvaA gene. The optimal primer pair was selected based on agarose gel electrophoresis, and the probe was designed. To eliminate false-positive results caused by the byproducts, base mismatches were introduced in the primer/probe pair. The improved primer/probe pair could specifically identify the target sequence. To explore the optimal reaction conditions, the effects of reaction temperature and duration of the RPA-LFS method were systematically investigated. The improved system enabled optimal amplification at 37 °C for 8 min, and the results were visualized within 1 min. The S. haemolyticus detection sensitivity of the RPA-LFS method, whose performance was unaffected by contamination with other genomes, was 0.147 CFU/reaction. Furthermore, we analyzed 95 random clinical samples with RPA-LFS, quantitative polymerase chain reaction (qPCR), and traditional bacterial-culture assays and found that the RPA-LFS had 100% and 98.73% compliance rates with the qPCR and traditional culture method, respectively, which confirms its clinical applicability. In this study, we designed an improved RPA-LFS assay based on the specific probe/primer pair for the detection of S. haemolyticus via rapid POCT, free from the limitations of the precision instruments, helping to make diagnoses and treatment decisions as soon as possible.

Dual-Gene Isothermal Amplification Coupled with Lateral Flow Strip for On-Site Accurate Detection of E. coli O157:H7 in Food Samples

On-site field detection of E. coli O157:H7 in food samples is of utmost importance, since it causes a series of foodborne diseases due to infections-associated ready-to-eat foods. Due to the instrument-free nature, recombinase polymerase amplification (RPA) coupled with lateral flow assay (LFA) is well-suited for such goal. However, the high genomic similarity of different E. coli serotypes adds difficulty to accurate differentiation of E. coli O157:H7 from others. Dual-gene analysis could significantly improve the serotype selectivity, but will further aggravate the RPA artifacts. To address such issue, here we proposed a protocol of dual-gene RPA-LFA, in which the target amplicons were selectively recognized by peptide nucleic acid (PNA) and T7 exonuclease (TeaPNA), thus eliminating false-positives in LFA readout. Adapting rfbE_O157 and fliC_H7 genes as the targets, dual-gene RPA-TeaPNA-LFA was demonstrated to be selective for E. coli O157:H7 over other E. coli serotypes and common foodborne bacteria. The minimum detection concentration was 10 copies/μL for the genomic DNA (∼300 cfu/mL E. coli O157:H7), and 0.24 cfu/mL E. coli O157:H7 in food samples after 5 h bacterial preculture. For lettuce samples contaminated with E. coli O157:H7 (single-blind), the sensitivity and specificity of the proposed method were 85% and 100%, respectively. Using DNA releaser for fast genomic DNA extraction, the assay time could be reduced to ∼1 h, which is appealing for on-site food monitoring.

Molecular engineering of fluorescence probe for real-time non-destructive visual screening of meat freshness

Spoiled meat poses a great challenge to food security and human health, which should be addressed by the early monitoring and warning of the meat freshness. We herein exploited a molecular engineering strategy to construct a set of fluorescence probes (PTPY, PTAC, and PTCN) with phenothiazine as fluorophore and cyanovinyl as recognition site for the facile and efficient monitoring of meat freshness. These probes produce an obvious fluorescence color transition from dark red to bright cyan in response to cadaverine (Cad) through the nucleophilic addition/elimination reaction. The sensing performances were elaborately improved to achieve quick response (16 s), low detection limit (LOD = 3.9 nM), and high contrast fluorescence color change by enhancing the electron-withdrawing strength of cyanovinyl moiety. Furthermore, PTCN test strips were fabricated for portable and naked-eye detection of Cad vapor with fluorescence color change from crimson to cyan, and accurate determination of Cad vapor level with RGB color (red, green, blue) mode analysis. The test strips were employed to detect the freshness of real beef samples, and demonstrated a good capability of non-destructive, non-contact and visual screening meat freshness on site.

Construction a novel detection method for Trichomonas vaginalis based on recombinant enzyme polymerase amplification targeting the Actin gene

Trichomoniasis is a common and curable sexually transmitted disease worldwide. The rapid, convenient, and accurate diagnosis of trichomoniasis is an important link in the prevention and treatment of the disease. The current detection methods of Trichomonas vaginalis are mainly wet mount microscopy, culture, nested PCR, and loop-mediated isothermal amplification. However, these detection methods have some shortcomings. In this study, a recombinant enzyme polymerase amplification (RPA) assay had been conducted to detect T. vaginalis. The target gene and the corresponding primers were screened, and the reaction system and conditions were optimized in the assay of RPA. The sensitivity and specificity of this detection method were analyzed. The detection efficiency of wet mount microscopy, culture, nested PCR, and RPA was compared by testing 53 clinical samples from vaginal secretions. By screening, the actin gene of T. vaginalis could be used as a target gene for RPA detection of T. vaginalis, and the optimum reaction condition to amplify the actin gene by RPA was at 39°C for 30 min. The detection limit of T. vaginalis DNA using RPA was 1 pg, corresponding to a sensitivity of approximately five trophozoites. The RPA assay demonstrated high specificity for T. vaginalis, and there was no cross-reactivity with Giardia lamblia, Escherichia coli, Lactobacillus, Toxoplasma gondii, Staphylococcus aureus, and Candida albicans. Of the 53 clinical samples, the positive rates of T. vaginalis detected by wet mount microscopy, culture, nested PCR and RPA were 50.9 4% (27/53), 71.7% (38/53), 71.7% (38/53), and 69.81% (37/53), respectively. Compared with culture which was used as the gold standard for diagnosing trichomoniasis, testing clinical samples by wet mount microscopy showed 71.05% sensitivity, 100% specificity, and moderate diagnostic agreement with the culture (K = 0.581, Z = 4.661, p < 0.001). The nested PCR showed 100% sensitivity, 100% specificity, and excellent diagnostic agreement (K = 1, Z = 7.28, p < 0.001), while RPA displayed 97.37% sensitivity, 100% specificity, and excellent diagnostic agreement (K = 0.954, Z = 6.956, p < 0.001). At the present study, rapid amplification of actin gene by RPA could be used as a tool for detection of T. vaginalis. The detection method of RPA was more sensitive than wet mount microscopy and displayed excellent specificity. Moreover, RPA amplification of actin gene did not require a PCR instrument and the amplification time was shorter than that of ordinary PCR. Therefore, the RPA assay was proposed in this study as a point-of-care examination and a diagnostic method of T. vaginalis infection, which exhibited the potential value in the treatment and prevention of trichomoniasis.

Nucleic acid amplification-based strategy to detect foodborne pathogens in milk: a review

Milk contaminated with trace amounts of foodborne pathogens can considerably threaten food safety and public health. Therefore, rapid and accurate detection techniques for foodborne pathogens in milk are essential. Nucleic acid amplification (NAA)-based strategies are widely used to detect foodborne pathogens in milk. This review article covers the mechanisms of the NAA-based detection of foodborne pathogens in milk, including polymerase chain reaction (PCR), loop-mediated isothermal amplification (LAMP), recombinase polymerase amplification (RPA), rolling circle amplification (RCA), and enzyme-free amplification, among others. Key factors affecting detection efficiency and the advantages and disadvantages of the above techniques are analyzed. Potential on-site detection tools based on NAA are outlined. We found that NAA-based strategies were effective in detecting foodborne pathogens in milk. Among them, PCR was the most reliable. LAMP showed high specificity, whereas RPA and RCA were most suitable for on-site and in-situ detection, respectively, and enzyme-free amplification was more economical. However, factors such as sample separation, nucleic acid target conversion, and signal transduction affected efficiency of NAA-based strategies. The lack of simple and effective sample separation methods to reduce the effect of milk matrices on detection efficiency was noteworthy. Further research should focus on simplifying, integrating, and miniaturizing microfluidic on-site detection platforms.

Portable electroanalytical nucleic acid amplification tests using printed circuit boards and open-source electronics

The realization of electrochemical nucleic acid amplification tests (NAATs) at the point of care (POC) is highly desirable, but it remains a challenge given their high cost and lack of true portability/miniaturization. Here we show that mass-produced, industrial standardized, printed circuit boards (PCBs) can be repurposed to act as near-zero cost electrodes for self-assembled monolayer-based DNA biosensing, and further integration with a custom-designed and low-cost portable potentiostat. To show the analytical capability of this system, we developed a NAAT using isothermal recombinase polymerase amplification, bypassing the need of thermal cyclers, followed by an electrochemical readout relying on a sandwich hybridization assay. We used our sensor and device for analytical detection of the toxic microalgae Ostreopsis cf. ovata as a proof of concept. This work shows the potential of PCBs and open-source electronics to be used as powerful POC DNA biosensors at a low-cost.

A Salmonella Microfluidic Chip Combining Non-Contact Eddy Heater and 3D Fan-Shaped Mixer with Recombinase Aided Amplification

Foodborne pathogenic bacteria have become a worldwide threat to human health, and rapid and sensitive bacterial detection methods are urgently needed. In this study, a facile microfluidic chip was developed and combined with recombinase-aided amplification (RAA) for rapid and sensitive detection of Salmonella typhimurium using a non-contact eddy heater for dynamic lysis of bacterial cells and a 3D-printed fan-shaped active mixer for continuous-flow mixing. First, the bacterial sample was injected into the chip to flow through the spiral channel coiling around an iron rod under an alternating electromagnetic field, resulting in the dynamic lysis of bacterial cells by this non-contact eddy heater to release their nucleic acids. After cooling to ~75 °C, these nucleic acids were continuous-flow mixed with magnetic silica beads using the fan-shaped mixer and captured in the separation chamber using a magnet. Finally, the captured nucleic acids were eluted by the eluent from the beads to flow into the detection chamber, followed by RAA detection of nucleic acids to determine the bacterial amount. Under the optimal conditions, this microfluidic chip was able to quantitatively detect Salmonella typhimurium from 1.1 × 10² to 1.1 × 10⁵ CFU/mL in 40 min with a detection limit of 89 CFU/mL and might be prospective to offer a simple, low-cost, fast and specific bacterial detection technique for ensuring food safety.

Colorimetric Approach for Nucleic Acid Salmonella spp. Detection: A Systematic Review

Water- and food-related health issues have received a lot of attention recently because food-poisoning bacteria, in particular, are becoming serious threats to human health. Currently, techniques used to detect these bacteria are time-consuming and laborious. To overcome these challenges, the colorimetric strategy is attractive because it provides simple, rapid and accurate sensing for the detection of Salmonella spp. bacteria. The aim of this study is to review the progress regarding the colorimetric method of nucleic acid for Salmonella detection. A literature search was conducted using three databases (PubMed, Scopus and ScienceDirect). Of the 88 studies identified in our search, 15 were included for further analysis. Salmonella bacteria from different species, such as S. Typhimurium, S. Enteritidis, S. Typhi and S. Paratyphi A, were identified using the colorimetric method. The limit of detection (LoD) was evaluated in two types of concentrations, which were colony-forming unit (CFU) and CFU per mL. The majority of the studies used spiked samples (53%) rather than real samples (33%) to determine the LoDs. More research is needed to assess the sensitivity and specificity of colorimetric nucleic acid in bacterial detection, as well as its potential use in routine diagnosis.

A CRISPR-Cas12a-powered magnetic relaxation switching biosensor for the sensitive detection of Salmonella

Magnetic relaxation switching (MRS) biosensors are attractive in the field of food safety owing to their simplicity and high signal-to-noise ratio. But they are less in sensitivity and stability caused by the insufficient crosslinking or non-specific binding of magnetic nanoparticles (MNPs) with targets. To address this problem, the CRISPR-Cas12a system was introduced into an MRS biosensor for the first time, to precisely control the binding of two types of MNPs with sizes of 130 nm (MNP₁₃₀) and 30 nm (MNP₃₀), for the sensitive detection of Salmonella. Delicately, the biosensor was designed based on the different magnetic properties of the two sizes of MNPs. The target Salmonella activated the collateral cleavage activity of the CRISPR-Cas12a system, which inhibited the binding of the two sizes of MNPs, resulting in an increase of unbound MNP₃₀. After separating MNP₁₃₀-MNP₃₀ complexes and MNP₁₃₀ from MNP₃₀, the free MNP₃₀ left in solution acted as transverse relaxation time (T₂) signal reporters for Salmonella detection. Under optimized conditions, the CRISPR-MRS biosensor presented a limit of detection of 1.3 × 10² CFU mL^-1 for Salmonella, which is lower than most MRS biosensor analogues. It also showed satisfactory specificity and performed well in spiked chicken meat samples. This biosensing strategy not only extends the reach of the CRISPR-Cas12a system in biosensors but also offers an alternative for pathogen detection with satisfactory sensitivity.

Recombinase polymerase amplification in the molecular diagnosis of microbiological targets and its applications

Since the introduction of the polymerase chain reaction (PCR) technique in 1983, nucleic acid amplification has permeated all fields of biological science, particularly clinical research. Despite its importance, PCR has been restricted to specialized centers and its use in laboratories with few resources is limited. In recent decades, there has been a notable increase in the development of new isothermal technologies for molecular diagnosis with the hope of overcoming the traditional limitations of the laboratory. Among these technologies, recombinase polymerase amplification (RPA) has a wide application potential because it does not require thermocyclers and has high sensitivity, specificity, simplicity, and detection speed. This technique has been used for DNA and RNA amplification in various pathogenic organisms such as viruses, bacteria, and parasites. In addition, RPA has been successfully implemented in different detection strategies, making it a promising alternative for performing diagnoses in environments with scarce resources and a high burden of infectious diseases. In this study, we present a review of the use of RPA in clinical settings and its implementation in various research areas.

Self-extending DNA-Mediated Isothermal Amplification System and Its Biosensing Applications

Signal amplification is critical to achieving sensitive biosensing, but complex strategies often bring problems like system instability, false positive, or narrow target spectrum. Here, a self-extending DNA-mediated isothermal amplification (SEIA) system with simple reaction components is introduced to achieve rapid, robust, and significant signal amplification. In SEIA, based on spontaneous refolding of specific DNA domains and using the previous generation product as a template, a DNA strand can extend continuously in an approximate exponential growth pattern, which was accurately predicted by our formula and well supported by AFM results. Based on a set of proof-of-concept experiments, it was proved that the SEIA system can output different signals and flexibly integrate various functional nucleic acids, which makes it suitable for different scenarios and realizes broad-spectrum target detection. Taking into account the advantages of simplicity, flexibility, and efficiency, the SEIA system as an independent signal amplification module will enrich the toolbox of biosensing design.

Selective Heavy Atom Effect Forming Photosensitizing Hot Spots in Double-Stranded DNA Matrix

Triplet exciton formation is essential for photosensitization-based photochemistry and photobiology. The heavy atom effect (HAE), in the form of either external or internal mode, is a basic mechanism for increasing the triplet exciton yield of photosensitizers. Herein, we report a new HAE mode by noncovalent cohosting of heavy atoms and photosensitizers in a double-stranded DNA (dsDNA) matrix. With dsDNA bearing several thymine (T) or cytosine (C) mismatches, heavy atoms (e.g., Hg²⁺ or Ag⁺) and dsDNA-staining dyes (photosensitizers) were spatially adjoined in close proximity, thus resulting in enhanced phosphorescence and ¹O₂ generation from the photosensitizers. The dsDNA-hosted HAE provides highly selective recognition for the heavy atoms, which is not applicable in either the external or the internal mode. Considering the simpleness and efficiency of the spatially adjoined HAE, as well as the functionality of DNA, the proposed HAE mode is appealing for various singlet oxygen- and phosphorescence-related applications.