Dual-Mode Sensing Platform for Electrochemiluminescence and Colorimetry Detection Based on a Closed Bipolar Electrode

Colorimetric and ECL dual-mode aptasensor for smartphone-based onsite sensitive detection of aflatoxin B1 in combination with ZnO@MWCNTs/g-C3N4 nanosheets and CuO@CuPt nanocomposites

The development of dual-mode strategies with superior sensitivity and accuracy have garnered increasing attention for researchers in Aflatoxin B1 (AFB1) analysis. Herein, a colorimetric-electrochemiluminescence (ECL) dual-mode biosensor was constructed for onsite and ultrasensitive determination of AFB1. The multi-wall carbon nanotubes (MWCNTs) were integrated with the ZnO metal organic frameworks (MOFs) to accelerate the electron transfer and boost the ECL intensity of g-C3N4 nanoemitters. Through the aptamer-based DNA sandwich assay, the CuO@CuPt nanocomposites were introduced onto the electrode and acted as the dual functional signal nanoprobes. Due to the good spectrum overlap between the CuO@CuPt nanoprobes and g-C3N4 nanosheets, ECL signal could be efficiently quenched. Additionally, the CuO@CuPt nanoprobes show superior catalytic properties towards the TMB and H2O2 colorimetric reactions, and an obvious color alteration from colorless to blue can be observed using the smartphone. Under optimized conditions, a sensitive and accurate dual-mode analysis of the AFB1 was accomplished with the colorimetric detection limit of 3.26 fg/mL and ECL detection limit of 0.971 fg/mL (S/N = 3). This study combines innovative nanomaterial properties of ZnO@MWCNTs, g-C3N4 and CuO@CuPt for ultrasensitive dual-mode detection, which offers new opportunities for the innovative engineering of the dual-mode sensors and demonstrates significant potential in food safety analysis.

Zr-MOF Carrier-Enhanced Dual-Mode Biosensing Platforms for Rapid and Sensitive Diagnosis of Mpox

Dual-mode readout platforms with colorimetric and electrochemiluminescence (ECL) signal enhancement are proposed for the ultrasensitive and flexible detection of the monkeypox virus (MPXV) in different scenes. A new nanotag, Ru@U6-Ru/Pt NPs is constructed for dual-mode platforms by integrating double-layered ECL luminophores and the nanozyme using Zr-MOF (UiO-66-NH2) as the carrier, which not only generates enhanced ECL and colorimetric signals but also provide greater stability than that of commonly used nanotags. Dual-mode platforms are used within 15 min from the "sample in" to the "result out" steps, without nucleic acid amplification. The colorimetric mode allows the screening of MPXV with the visual limit of detection (vLOD) of 0.1 pM (6 × 108 copies µL-1) and the ECL mode supports quantitative detection of MPXV with an LOD as low as 10 aM (6 copies·µL-1), resulting in a broad sensing range of 60 to 3 × 1011 copies·µL-1 (10 orders of magnitude). Validation is conducted using 50 clinical samples, which is 100% concordant to those of quantitative polymerase chain reaction (qPCR), indicating that Ru@U6-Ru/Pt NPs-based dual-mode sensing platforms showed great promise as rapid, sensitive, and accurate tools for diagnosis of the nucleic acid of MPXV and other infectious pathogens.

A spatial-potential resolved bipolar electrode electrochemiluminescence biosensor based on polarity conversion for dual-mode detection of miRNA-122 and CEA

In this work, a spatial-potential resolved bipolar electrode electrochemiluminescence (BPE-ECL) biosensor based on polarity conversion strategy and CuHCF electrocatalyst was constructed for dual-mode detection of miRNA-122 and carcinoembryonic antigen (CEA). ECL technology was firstly used to systematically study the polarity conversion of BPE. It was found that changing the polarity of the driving voltage would cause the polarity change of BPE, and led to the change of the luminescent position of Ru(bpy)32+. As a "proof-of-concept application", we developed a shielded dual-channel BPE-ECL biosensor for dual-mode detection of miRNA-122 and CEA. In order to further improve the detection sensitivity, a non-precious metal electrocatalyst CuHCF with outstanding electrocatalytic reduction activity of H2O2 was firstly introduced to the BPE-ECL biosensor for signal amplification, which could generate high faradaic current under the excitation of negative potential. Based on the charge neutrality principle of BPE, the enhancement of the faradaic current resulted in the ECL signal amplification of Ru(bpy)32+. The targets in the sensing grooves caused the introduction or fall off of CuHCF, which led to the ECL signal change of Ru(bpy)32+ in the signal grooves, and realized the dual-mode detection of miRNA-122 and CEA. This work provided a deeper understanding of the polarity change of BPE. Furthermore, the introduction of non-precious metal electrocatalyst had broadened the application range of BPE-ECL sensors.

Electrochemical/photoelectrochemical dual-mode aptasensor for sensitive aflatoxin B1 assay based on distance-modulation strategy using Au NPs/PCZIF-8-ZnO as sensing substrate

Aflatoxin B1 (AFB1), a hepatotoxic and carcinogenic food contaminant, is commonly found in agricultural food. Herein, Au NPs anchored ZIF-8-derived porous carbon-ZnO (Au NPs/PCZIF-8-ZnO) was firstly synthesized to act as the sensing substrate. Then, a ratiometric electrochemical (EC) and "off-on" photoelectrochemical (PEC) dual-mode paper-based aptasensor was presented for AFB1 detection based on a distance-modulation sensing strategy. The independent signal transduction mechanisms and output mode not only broaden the dynamic detection range but also provide a self-verification to assay results, improving the sensitivity and reliability. The wide detection ranges of 0.1 pg/mL-100 ng/mL (EC mode) and 0.02 pg/mL-100 ng/mL (PEC mode) were obtained using dual-mode aptasensor, with detection limits of 36.7 and 9.3 fg/mL, respectively. The fabricated aptasensor exhibited excellent selectivity, reproducibility and stability. Furthermore, it exhibited good practicability for AFB1 assays in real samples, demonstrating great potential applications for food safety evaluation.

A sandwich-type dual-mode biosensor based on graphdiyne and DNA nanoframework for ultra-sensitive detection of CD142 gene

Thalassemia is a globally prevalent single-gene blood disorder, with nearly 7% of the world's population being carriers. Therefore, the development of specific and sensitive methods for thalassemia detection holds significant importance. Herein, a sandwich-type electrochemical/colorimetric dual-mode biosensor is developed based on gold nanoparticles (AuNPs)/graphdiyne (GDY) and DNA nanoframeworks for ultra-sensitive detection of CD142 gene associated with sickle cell anemia. Utilizing AuNPs/GDY as the substrate electrode, the fabricated sandwiched DNA nanoframework not only improves selectivity but also introduces numerous signal probes to further amplify the output signal. In the electrochemical mode, glucose oxidase catalyzes the oxidation of glucose, generating electrons that are transferred to the biocathode for a reduction reaction, resulting in an electric signal proportional to the target concentration. In the colorimetric mode, glucose oxidase catalyzes the generation of H2O2 from glucose, and with the aid of horseradish peroxidase, H2O2 oxidizes 3,3',5,5'-tetramethylbenzidine to produce a colored product, enabling colorimetric detection of the target. The dual-mode biosensor demonstrates a detection range of 0.0001-100 pM in the electrochemical mode and a detection range of 0.0001-10,000 pM in the colorimetric mode. The detection limit in the electrochemical mode is determined to be 30.4 aM (S/N=3), while in the colorimetric mode is of 35.6 aM (S/N=3). This dual-mode detection achieves ultra-sensitive detection of CD142, demonstrating broad prospects for application.

A visualization method for quickly detecting nitrite ions in breath condensate using a portable closed bipolar electrochemical sensor

A portable and non-invasive sensor presents an innovative way to measure inflammation biomarkers in exhaled breath condensate (EBC). This research is focused on developing a miniaturized bipolar electrochemical sensor that can be connected to a smartphone app. This device will be able to detect adding known amounts of nitrite (spikes) to a salt solution and small amounts of nitrite ions in collected real samples in EBC. The sensor was fabricated and tested for its rapid electron transfer capability and ability to detect nitrite ions even at very low concentrations and low real sample levels. In the proposed setup, when the required potential was applied by using a direct power supply, the nitrite ions were oxidized electrocatalytically at amine-functionalized graphene oxide (AGO) decorated with gold nanoparticles on a carbon paper anodic pole. On the other hand, the reduction reaction of Prussian blue occurred at the cathodic pole of the bipolar electrode simultaneously. This strategy led to a change in color from blue to white as a result of the reduction process and the color change is proportional to the concentration of nitrite ions in the analytical solution. The combination of smartphones with the colorimetric method has resulted in a platform for the detection of test strips that is more visual and convenient. The amperometry and voltammetric methods of nitrite detection showed a linear range of up to 1230 μM. The bipolar electrochemical sensor was able to detect the clinically relevant range of nitrite from 0.5 to 85 μM in a buffer with an ultralow detection limit (LOD) of 250 nM (S/N = 3), fast response and excellent selectivity. It was benchmarked by utilizing pre-characterized real EBC samples to differentiate patients with respiratory diseases from healthy volunteers. By tracking the results of nitrite measurements over time, it has become possible to detect trends and changes in an individual's nitrite ion concentration and to potentially identify lung inflammation earlier.

Constructed MXene matrix composites as sensing material and applications thereof: A review

Most studies on MXene matrix composites for sensor development have primarily focused on synthesis and application. Nevertheless, there is currently a lack of research on how the introduction of different materials affects the sensing properties of these composites. The rapid development of MXene has raised intriguing questions about improving sensor performance by combining MXene with other materials such as polymers, metals and inorganic non-metals. This review will concentrate on the construction of MXene-based composites and explore ways to enhance their sensor applications. Specifically, this review describes why the introduction of materials to the system brings the advantage of low concentration and high sensitivity assays, as well as the MXene-based frameworks that have been recently investigated. Lastly, in order to capture the current trend of MXene-based composites in sensor applications and identify promising research directions, this review will critically evaluate the potential applications of newly developed MXene systems.

Dual-mode fluorescence and electrochemiluminescence sensors based on Ru-MOF nanosheets for sensitive detection of apoE genes

A fluorescence-electrochemiluminescence (FL-ECL) dual-mode sensor for apoE gene detection has been developed, leveraging the unique properties of ruthenium metal organic framework nanosheets (RuMOFNSs). The system utilizes the quenching effect of the Ru(bpy)32+ ECL signal by ferrocene, leading to the synthesis of a multi-electron electrical signal marker, bisferrocene. By immobilizing the P-DNA on RuMOFNSs, bisferrocene quenches both FL and ECL signals. The addition of T-DNA and the consequent formation of double-stranded DNA enable the ExoIII enzyme to excise the bisferrocene fragment, restoring the signals. The sensor demonstrates wide detection linear ranges (1 fM to 1 nM for FL and 0.01 fM to 10 pM for ECL) and remarkable sensitivity (0.048 fM for FL and 0.016 fM for ECL). The dual-mode design offers enhanced reliability through a self-correction feature, reducing false positives. Compared to single-mode sensors, the dual-mode sensor shows significant advantages. Real-world testing confirms the sensor's capacity for robust detection in actual samples, underscoring its promising application in early disease diagnosis. This innovative approach opens up avenues for multi-signal response sensors, offering significant potential for diagnostic technologies.

A dual-mode sensor platform with adjustable electrochemiluminescence-fluorescence for selective detection of paraquat pesticide

This study presents functionalized metal-organic frameworks nanosheets (RuMOFNSs) with strong electrochemiluminescence (ECL) and fluorescence (FL) properties and a novel signal marker-tetraferrocene. Based on the efficient quenching effect of the tetraferrocene on RuMOFNSs, a "signal switch" ECL-FL dual-mode sensor is constructed for sensitive detection of paraquat (PQ). ECL and FL signals are annihilated after adding paraquat-aptamer DNA (PQ-Apt DNA) labeled with tetraferrocene since it is close to RuMOFNSs. PQ is added, and the strong binding and intermolecular interaction between PQ-Apt DNA and PQ induces spatial separation, with tetraferrocene groups far away from RuMOFNSs. At this point, ECL and FL signals are restored. The change in ECL and FL signals realized the quantitative determination of the PQ solution. In addition, the dual-mode sensor exhibits high sensitivity and specificity with detection limits as low as 0.008 ng/mL and 0.059 ng/mL. The proposed sensor is successfully applied to determine PQ, indicating its great application potential in the food industry.

Dual-mode sensing chip for photoelectrochemical and electrochromic visual determination of deoxynivalenol mycotoxin

The successful development of a dual-mode sensing chip for deoxynivalenol (DON) detection using photoelectrochemical (PEC) and electrochromic visualization techniques is reported. By laser etching technology, different functional areas, including the photoanode, the cathode, and the electrochromic area, are fabricated on indium tin oxide (ITO) glass. Then, these three areas are further respectively modified with PEC active materials, platinum nanoparticles, and Prussian blue. Under light illumination, photocurrents generate between the photoanode and the cathode due to the separation of photo-induced electrons and holes in the TiO2/3DNGH material. Meanwhile, the photo-induced electrons are transferred to Prussian blue on the visualization area, which will be reduced to colorless Prussian white. The binding of DON molecules and aptamers can promote electron transfer and reduce the recombination of electrons and holes, allowing for simultaneous quantitative detection of DON using either the photocurrent or color change. The sensor chip has a broad detection range of DON concentrations of 1 fg⋅mL-1 to 100 pg⋅mL-1 in the PEC mode with the limit of detection of 0.37 fg⋅mL-1, and 1 to 250 ng⋅mL-1 in the visualization mode with the limit of detection of 0.51 ng⋅mL-1. This portable dual-mode sensor chip can be used in both laboratory and field settings without the need for specialized instruments, making it a powerful tool for ensuring food safety. At the same time, the analysis of the standard addition method of the actual sample by using the sensor chip shows that, in the PEC mode, the recoveries of the dual-mode aptasensor chip were 91.3 to 99.0% with RSD values of 1.73~2.55%, and in visualization mode, the recoveries of the dual-mode aptasensor chip were 99.2 to 102.0% with RSD values of 1.00~6.21%, which indicate good accuracy and reproducibility.

Portable smartphone platform based on Ti3C2 MQDs/CDs assembly for ratiometric fluorescence quantitative monitoring of crystal violet

Recent years have witnessed ever-increasing achievements using Ti3C2 MXene quantum dots (Ti3C2 MQDs) and their vital contributions to fluorescent biosensing. However, the applicability and flexibility of most Ti3C2 MQD-based sensors are limited by their emission of a single blue wavelength. To address this issue, we present a facile strategy to utilize carbon dots as a model to construct a ratiometric fluorescent sensor based on fluorescence resonance energy transfer to quantitatively monitor crystal violet. The fabricated probe exhibited dual emission at 440 and 565 nm, respectively; when introducing crystal violet, the peak at 565 nm was quenched but that at 440 nm remained constant. Further aiming for portable, convenient, and on-site analysis, an innovative smartphone-assisted platform provides promising prospects for future in situ quantitation. This work creates a general strategy for constructing Ti3C2 MQD-based composite fluorescent systems, as well as suggesting great application potential in food security monitoring.

Sensitive dual-mode sensing platform for Amyloid β detection: Combining dual Z-scheme heterojunction enhanced photoelectrochemistry analysis and dual-wavelength ratiometric electrochemiluminescence strategy

As a tumor biomarker, the accumulation of amyloid β oligomers (Aβo) in the brain has been suggested as a key feature in the pathogenesis and progression of Alzheimer's disease (AD). In this work, we designed a novel photoelectrochemical (PEC) and electrochemiluminescence resonance energy transfer (ECL-RET) dual-mode biosensor to achieve ultra-sensitive detection of Aβo. Specifically, the electrode surface modified Carbon Dots (C Dots) and the electrodeposited polyaniline (PANI) film formed a Z-scheme heterojunction reversing the photocurrent signal, and then the Aβo specific recognition peptide was attached to the surface via amide bonding between the amino group of PANI and carbonyl group of peptide. After that, in the presence of CdTe labeled specific recognition aptamer for Aβ (CdTe-Apt), Aβo was captured to construct a sandwich-type biosensor and exhibited a significantly enhanced cathodic photocurrent response because the formed dual Z-scheme heterojunction promoted charge separation efficiency. Interestingly, the proposed biosensor also caused a ratiometric change in the ECL intensity at 555 nm and 640 nm. Therefore, the developed biosensor achieved dual-mode detection of Aβo, where the PEC detection range of Aβo was from 10 fM to 0.1 μM (with a detection limit of 4.27 fM) and the ECL method provided a linear detection range of 10 fM to 10 nM (with a detection limit of 6.41 fM). The stability and reliability of the experimental results indicate that this has been a promising biosensing pattern and could be extended to the analysis of other biomarkers.

Diazo-reaction based dual-mode colorimetric-electrochemical sensing of nitrite in pickled food

Development of an effective and convenient sensor for sensitive detection of nitrites is of great concern since excessive amounts of nitrites can be harmful to both human health and the environment. In this work, Cu-MOF modified exfoliated graphite paper (EGP) was employed as a signal reporter to enable the visual and electrochemical dual-mode sensing of nitrites. Cu-MOFs were in situ synthesized on EGP, which exhibited an excellent oxidase enzyme-like activity to oxidize 3,3',5,5'-tetramethylbenzidine (TMB) into its oxidation product (oxTMB). The multi-layer structure and the superior electrical conductivity of EGP not only facilitated the loading of the Cu-MOF nanozyme for colorimetric sensing but also enabled its use as an underlying backbone to support electroanalysis. Based on the recognition of nitrite through a highly specific diazo reaction between nitrite and oxTMB, the addition of nitrite caused the colorimetric sensing solution to change color from blue to green, which allowed for the colorimetric sensing of nitrite with a limit of detection (LOD) of 8.5 × 10-6 mol L-1. Meanwhile, the Cu-MOF/EGP electrochemical platform was employed for ratiometric detection of nitrite based on the electrochemical oxidation of nitrite and TMB. Compared with the colorimetric mode, the electrochemical mode possessed higher sensitivity with a LOD of 5.4 × 10-7 mol L-1, indicating the high sensitivity and accuracy of the proposed dual-mode sensing strategy. Furthermore, the determination of nitrite in different pickled food samples is demonstrated.

Paper-based bipolar electrode electrochemiluminescence sensors for point-of-care testing

In the past few years, point-of-care testing (POCT) technology has crossed the boundaries of laboratory determination and entered the stage of practical applications. Herein, the latest advances and principal issues in the design and fabrication of paper-based bipolar electrode electrochemiluminescence (BPE-ECL) sensors, which are widely used in the POCT field, are highlighted. After introducing the attractive physical and chemical properties of cellulose paper, various approaches aimed at enhancing the functions of the paper, and their underlying principles are described. The materials typically employed for fabricating paper-based BPE are also discussed in detail. Subsequently, the universal method of enhancing BPE-ECL signal and improving detection accuracy is put forward, and the ECL detector widely used is introduced. Furthermore, the application of paper-based BPE-ECL sensors in biomedical, food, environmental and other fields are displayed. Finally, future opportunities and the remaining challenges are analyzed. It is expected that more design concepts and working principles for paper-based BPE-ECL sensors will be developed in the near future, paving the way for the development and application of paper-based BPE-ECL sensors in the POCT field and providing certain guarantee for the development of human health.

A fluorescence-electrochemiluminescence dual-mode sensor based on a "switch" system for highly selective and sensitive K-ras gene detection

Herein, an fluorescence (FL)-electrochemiluminescence (ECL) dual-mode biosensor is constructed based on the dual-signal "turn-on" strategy of functionalized metal-organic frameworks nanosheets (RuMOFNSs)-tetraferrocene for K-ras gene detection, and the mechanism of bursting through front-line orbital theory is explained for the first time. Amino-functionalized tetraferrocene-labeled probe DNA molecules are linked to RuMOFNSs by covalent amide bonds, acting as FL and ECL intensity switches. The target DNA, complementary to the probe DNA, triggers cyclic amplification of the target by nucleic acid exonuclease III (Exo III), repelling tetraferrocene reporter groups away from RuMOFNSs and inhibiting the electron transfer process and photoinduced electron transfer (PET) effect. These phenomena induce a double turn-on of FL and ECL signals with a high signal-to-noise ratio. The developed FL-ECL dual-mode sensing platform provides sensitive detection of the K-ras gene with detection limits of 0.01 fM (the detection range is 1 fM to 1 nM) and 0.003 fM (the detection range is 0.01 fM to 10 pM), respectively. In addition, the proposed dual-mode sensor can be easily extended to detect other disease-related biomarkers by changing the specific target and probe base sequences, depicting potential applications in bioanalysis and early disease diagnosis.

A dual-mode ratiometric aptasensor for accurate detection of pathogenic bacteria based on recycling of DNAzyme activation

Pathogenic bacteria have a significant impact on food safety. Herein, an innovative dual-mode ratiometric aptasensor was constructed for ultrasensitive and accurate detection of Staphylococcus aureus (S. aureus) based on recycling of DNAzyme activation on gold nanoparticles-functionalized MXene nanomaterials (MXene@Au NPs). Electrochemiluminescent (ECL) emitter-labeled probe DNA (probe 2-Ru) containing the blocked DNAzyme was partly hybridized with aptamer and then captured by electrochemical (EC) indicator-labeled probe DNA (probe 1-MB) on electrode surface. When S. aureus presented, the conformation vibration of probe 2-Ru activated the blocked DNAzymes, leading to recycling cleavage of probe 1-MB and ECL tag close to electrode surface. Based on the reverse change tendencies of ECL and EC signals, aptasensor achieved S. aureus quantification from 5 to 10⁸ CFU/mL. Moreover, the self-calibration characteristic of the aptasensor with dual-mode ratiometric readout ensured the reliable measurement of S. aureus in real samples. This work showed useful insight into sensing foodborne pathogenic bacteria.

Gold nanocluster-confined covalent organic frameworks as bifunctional probes for electrochemiluminescence and colorimetric dual-response sensing of Pb2

The development of bifunctional signal probes based on a single component is highly desirable for sensitive and simple dual-mode detection of Pb²⁺. Here, novel gold nanocluster-confined covalent organic frameworks (AuNCs@COFs) were fabricated as a bisignal generator to enable electrochemiluminescence (ECL) and colorimetric dual-response sensing. AuNCs with both intrinsic ECL and peroxidase-like activity were confined into the ultrasmall pores of the COFs via an in situ growth method. On the one hand, the space-confinement effect of the COFs closed the ligand motion-induced nonradiative transition channels of the AuNCs. As a result, the AuNCs@COFs exhibited a 3.3-fold enhancement in anodic ECL efficiency compared to the solid-state aggregated AuNCs using triethylamine as the coreactant. On the other hand, due to the outstanding spatial dispersibility of the AuNCs in the structurally ordered COFs, a high density of active catalytic sites and accelerated electron transfer were obtained, leading to the promotion of the enzyme-like catalytic capacity of the composite. To validate its practical applicability, a Pb²⁺-triggered dual-response sensing system was proposed based on the aptamer-regulated ECL and peroxidase-like activity of the AuNCs@COFs. Sensitive determinations down to 7.9 pM for the ECL mode and 0.56 nM for the colorimetric mode were obtained. This work provides an approach for designing single element-based bifunctional signal probes for dual-mode detection of Pb²⁺.

Capacitor-parallel-amplified decoupled photoelectrochemical/electrochromic dual-mode bioassay for sensitive detection of microRNA with high reliability

To achieve sensitive detection of low-content microRNA, photoelectrochemical/electrochromic dual-mode sensor with intrinsically low background signal has been developed, but the two detection modules are usually designed with a series-connected structure, which may cause signal interference and thus affect the detection reliability. To solve the above problems, a decoupled dual-mode bioassay for sensitive miRNA-21 detection with high reliability is constructed in this work, by selecting two capacitors to realize parallel amplification for the two detection modules, supplemented with a 3D DNA nanoring photoelectrode signal amplification strategy. The complete decoupling of the two detection modes, photoelectrochemical and electrochromic, as well as the use of digital multimeter, improves the reliability and accuracy of the sensor, and also frees it from dependence on electrochemical workstation, making detection more intuitive and faster. With simple structure, low cost, good reproducibility, high sensitivity, and easy operation, the capacitor-parallel-amplified decoupled photoelectrochemical/electrochromic dual-mode bioassay has broad application prospect in on-site point-of-care detection of diseases and low-cost clinical diagnosis. The design idea of decoupled dual-mode detector can also be extended to the construction of other dual-mode methods.

Dual-Mode Sensing Platform for Cancer Antigen 15-3 Determination Based on a Silica Nanochannel Array Using Electrochemiluminescence and Electrochemistry

An electrochemiluminescence-electrochemistry (ECL-EC) dual-mode sensing platform based on a vertically-ordered mesoporous silica films (VMSF) modified electrode was designed here for the sensitive and selective determination of cancer antigen 15-3 (CA 15-3), a specific biomarker of breast cancer. VMSF was assembled through a rapid electrochemically assisted self-assembly (EASA) method and plays a crucial role in signal amplification via a strong electrostatic interaction with the positively charged bifunctional probe Ru(bpy₎₃²⁺. To construct the biorecognition interface, epoxy functional silane was linked to the surface of VMSF for further covalent immobilization of the antibody. As a benefit from the specific combination of antigen and antibody, a non-conductive immunocomplex layer was formed in the presence of CA 15-3, leading to the hinderance of the mass and electron transfer of the probes. Based on this strategy, the dual-mode determination of CA 15-3 ranging from 0.1 mU/mL to 100 mU/mL with a LOD of 9 μU/mL for ECL mode, and 10 mU/mL to 200 U/mL with a LOD of 5.4 mU/mL for EC mode, was achieved. The proposed immunosensor was successfully employed for the detection of CA 15-3 in human serum without tedious pretreatment.

Superior graphdiyne self-powered biosensing platform with highly sensitivity and reliability for dual-mode detection of MicroRNA by integrating T7 Exonuclease and 3D DNA walker induced rolling circle amplification

A highly sensitivity self-powered biosensor is developed based on T7 exonuclease (T7 Exo) and 3D DNA walker induced rolling circle amplification (RCA) for electrochemical/colorimetric dual-mode detection of microRNA-21 (miRNA-21) with improved reliability. Taking its advantage of fascinating properties, such as high structure defects and good conductivity, graphdiyne is prepared and used to prepare high-performance enzyme biofuel cell. T7 Exo-assisted 3D DNA walker target recognition triggers RCA reaction to obtain a significantly amplified signal response. A capacitor is integrated to the enzyme biofuel cell to further amplify the electrochemical output signal of the self-powered biosensor. In detection system, glucose oxidase catalyzes glucose oxidation to produce hydrogen peroxide, and 3,3',5,5'-tetramethylbenzidine (TMB) is then catalyzed to generate colored products, so as to achieve the colorimetric detection of the target. Analysis signals of diverse modes are recorded independently. Consequently, detection of microRNA with improved reliability and wider signal response range are achieved by electrochemical/colorimetric dual-mode with detection limits of 0.15 and 33 fM (S/N = 3) respectively. In addition, the proposed self-powered biosensor successfully applied for the detection of miRNA-21 in human serum samples, confirming its practical applicability in clinical diagnosis. It is powerfully anticipated the proposed self-powered biosensor possesses great potential to be applied to other biomedical domains.

Detection of Gastric Cancer-Associated d-Amino Acids and Carcinoembryonic Antigen by Colorimetric and Immuno ECL Sensing Platform Based on the Catalysis of N/S-Doped Carbon Dots @ N-Rich Porous Carbon Nanoenzyme

Gastric cancer is a malignant tumor, and its early diagnosis remains challenging due to the lack of simple and sensitive detection methods and specific biomarkers. In this work, to improve the detection reliability, we developed a dual-mode detection strategy for the detection of two biomarkers associated with it. First, an N- and S-doped carbon dots-N-rich porous carbon nanoenzyme (N/S-CDs@NC) was prepared by a two-step pyrolysis of thiourea-penetrated zinc-based zeolite imidazole framework. It was then combined with the 3,3',5,5'-tetramethylbenzidine-H₂O₂ system for the colorimetric detection of d-amino acids (i.e., d-proline (d-Pro) and d-alanine (d-Ala)) in saliva, based on d-amino acid oxidase catalyzing d-amino acid oxidation to produce H₂O₂. In this way, the low detection limits (S/N = 3) of d-Pro and d-Ala were 0.14 and 0.35 μM, respectively. Furthermore, N/S-CDs@NC was combined with the luminol-H₂O₂ electrochemiluminescence (ECL) system and magnetic immune accumulation/separation strategy to detect the carcinoembryonic antigen (CEA) in serum. The porous N/S-CDs@NC could facilitate participant contact, promote the generation of hydroxyl radical (^•OH), and electrostatically attract ^•OH, thereby significantly amplifying the ECL signal of luminol and improving the signal stability. Thus, the detection mode showed considerable sensitivity and selectivity, with a low detection limit of 0.26 pg mL^-1. The strategy proposed in this work can also be used for the detection of other disease markers by substituting the recognition elements, thus having good application potential.

Colorimetric and electrochemical integrated dual-mode detection of glucose by utilizing CoOOH@Cu nanosheets as peroxidase mimetics

Herein, we developed a colorimetric and electrochemical integrated dual-mode assay for glucose detection by utilizing CoOOH@Cu nanosheets as peroxidase mimetics. With the advantages of self-calibration, sensitivity and lower sample cost, this designed dual-mode assay offers great potential in blood glucose analysis.

Colorimetric and Photocurrent-Polarity-Switching Photoelectrochemical Dual-Mode Sensing Platform for Highly Selective Detection of Mercury Ions Based on the Split G-Quadruplex-Hemin Complex

Mercury ion (Hg²⁺) is one of the most harmful heavy metal ions with the greatest impact on public health. Herein, based on the excellent catalytic activity toward 3,3',5,5'-tetramethylbenzidine (TMB) and the strong photocurrent-polarity-switching ability to SnS₂ photoanode of the split G-quadruplex-hemin complex, the magnetic NiCo₂O₄@SiO₂-NH₂ sphere-assisted colorimetric and photoelectrochemical (PEC) dual-mode sensing platform was developed for the Hg²⁺ assay. First, the amino-labelled single-stranded DNA1 (S1) was immobilized on NiCo₂O₄@SiO₂-NH₂ and then partly hybridized with another single-stranded DNA2 (S2). When Hg²⁺ was present, the thymine-Hg²⁺-thymine base pairs between S1 and S2 were formed, causing the formation of the split G-quadruplex in the presence of K⁺. After addition of hemin, the split G-quadruplex-hemin complex was obtained and effectually catalyzed the H₂O₂-mediated oxidation of TMB. Thus, the color and absorbance intensity of the TMB solution were changed, resulting in the visual and colorimetric detection of Hg²⁺. The linear response range is 10 pM to 10 nM, and the detection limit is 3.8 pM. Meanwhile, the above G-quadruplex-hemin complex effectively switched the photocurrent polarity of SnS₂-modified indium tin oxide electrode, leading to the sensitive and selective PEC assay of Hg²⁺ with a linear response range of 5 pM to 500 nM and a detection limit of 2.3 pM. Moreover, the developed dual-mode sensing platform provided mutual authentication of detection results in different modes, effectively improving the assay accuracy and confidence, and may have a good potential application in highly sensitive, selective, and accurate determination of Hg²⁺ in environmental fields.

In Situ Imaging of Endogenous Hydrogen Peroxide Efflux from Living Cells via Bipolar Gold Nanoelectrode Array and Electrochemiluminescence Technology

The integration of a closed bipolar electrode (c-BPE) array and electrochemiluminescence (ECL) detection received a boost in applications in the detection of cell adhesion and disease-related biomarkers. This work proposed a gold nanorod array based c-BPE-ECL system to realize an in situ image of endogenous hydrogen peroxide (H₂O₂) efflux from living cells and parallel analysis of endogenous H₂O₂ released from multiple cells by converting electrochemical signals into optical signals. The gold nanorod array with high density was prepared by a repeating chronopotentiometry procedure with anodic aluminum oxide (AAO) membrane as a template. The c-BPE array was fabricated by assembling poly(dimethylsiloxane) (PDMS) chips on both sides of the gold nanorod array. When an appropriate driving potential is applied, H₂O₂ generated from living cells at the sensing pole was reduced on the gold nanorod, triggering the oxidation of the ECL reagent at the reporting pole, which allowed the detection of H₂O₂ released from living cells. Under phorbol myristate acetate (PMA) stimulation, H₂O₂ released from living HeLa, HepG2, MCF-7, and LO2 cells was determined to be 47, 32.4, 25.7, and 6.3 μM, respectively. This indicated that the amount of H₂O₂ released from PMA-stimulated cancer cells was significantly higher than that from the stimulated normal cells. This work presented a new approach for in situ imaging of H₂O₂ released from living cells and could also be used to detect other electrochemically active or non-electrochemically active molecules through simple cell surface modification, which may have potential applications in cell apoptosis study and disease diagnosis.

Molecularly Imprinted Polymer Functionalized Bi2S3/Ti3C2TX MXene Nanocomposites for Photoelectrochemical/Electrochemical Dual-Mode Sensing of Chlorogenic Acid

We report the proof-of-concept of molecularly imprinted polymer (MIP) functionalized Bi2S3/Ti3C2TX MXene nanocomposites for photoelectrochemical (PEC)/electrochemical (EC) dual-mode sensing of chlorogenic acid (CGA). Specifically, the in-situ growth of the Bi2S3/Ti3C2TX MXene served as a transducer substrate for molecularly imprinted polymers such as PEC and EC signal generators, due to its high surface area, suitable bandwidth and abundant active sites. In addition, the chitosan as a binder was encapsulated into MIP by means of phase inversion on a fluorine-doped tin dioxide (FTO) electrode. In the determination of CGA as an analytical model, the dual-mode sensor based on MIP functionalized Bi2S3/Ti3C2TX MXene nanocomposites had good selectivity, excellent stability and acceptable reproducibility, which displayed a linear concentration range from 0.0282 μM to 2824 μM for the PEC signal and 0.1412 μM to 22.59 μM for the EC signal with a low detection limit of 2.4 nM and 43.1 nM, respectively. Importantly, two dual-response mode with different transduction mechanisms could mutually conform to dramatically raise the reliability and accuracy of detection compared to single-mode detection. This work is a breakthrough for the design of dual-mode sensors and will provide a reasonable basis for the construction of dual-mode sensor platforms.

Paper-Based Bipolar Electrode Electrochemiluminescence Platform Combined with Pencil-Drawing Trace for the Detection of M.SssI Methyltransferase

Herein, a hand-drawing paper-based bipolar electrode (BPE) electrochemiluminescence (ECL) platform for M.SssI methyltransferase (M.SssI MTase) assay was proposed via employing high electrocatalytic Pt@CeO₂ as an ECL co-reaction accelerator and pencil-drawing graphite electric circuits as wires and electrodes. Notably, the introduction of pencil-drawing trace not only simplified the manufacturing process but also reduced the cost and saved fabricating time. Meanwhile, Pt@CeO₂ with good electrocatalytic activity and satisfactory chemical stability was used at the anode of the closed BPE-ECL device to accelerate the oxidation rate of uric acid. Due to the balanced charges of the bipolar electrode, the ECL response of the MnS: CdS@ZnS/S₂O₈^2- system emitted on the cathode was enhanced. In situ growth of gold nanoparticles in the two electrode areas was convenient for DNA immobilization. With the above points in mind, the specific DNA double strands functionalized via Pt@CeO₂ were employed to identify M.SssI MTase. The unmethylated DNA double strands were cut by HpaII endonuclease, resulting in the quenching of the ECL signal. Under the optimal conditions, sensitive detection of M.SssI MTase in a wide linear range of 0.01-100 U·mL^-1 with a satisfactory detection limit of 0.008 U·mL^-1 was realized. The reliable and versatile BPE-ECL tool for the determination of M.SssI MTase with easy-to-operate pencil-drawing traces and independent solution systems provides a new opportunity to develop paper-based devices applied in early disease diagnosis and pathogenesis research.

Dual-Mode Immunosensor for Electrochemiluminescence Resonance Energy Transfer and Electrochemical Detection of Rabies Virus Glycoprotein Based on Ru(bpy)32+-Loaded Dendritic Mesoporous Silica Nanoparticles

Rabies is a serious zoonotic disease in almost all warm-blooded animals and causes fatal encephalitis. The detection of rabies virus (RABV) is critical and remains a significant challenge. Herein, an electrochemiluminescence resonance energy transfer (ECL-RET) and electrochemical (EC) dual-mode immunosensor was developed for highly sensitive detection of RABV glycoprotein. Dendritic mesoporous silica nanoparticles (DMSNs) were employed to load Ru(bpy)₃²⁺ and to obtain ECL probes (Ru@DMSNs). Ru@DMSNs were decorated on the electrode surface, followed by the modification of the RABV antibody (Ab₁). RABV was specifically recognized and captured by Ab₁, causing the decline of the ECL signal due to the obstruction of electron transfer. Additionally, manganese oxide nanoparticles (MnO_x) modified with Ab₂ can further quench the ECL signal of Ru@DMSNs via the RET between Ru@DMSNs and MnO_x. Meanwhile, MnO_x can catalyze the oxidation of o-phenylenediamine (o-PD), generating a significant differential pulse voltammetry (DPV) signal as a second signal to monitor RABV glycoprotein concentration. Consequently, an immunosensor was developed to achieve dual-signal detection of RABV and improve reliability. Under the optimal conditions, detection ranges of 0.10 pg·mL^-1 to 10 ng·mL^-1 for ECL (with an 88 fg·mL^-1 detection limit) and 1 pg·mL^-1 to 2 ng·mL^-1 for EC (with a 0.1 pg·mL^-1 detection limit) were obtained for RABV detection. The reliability of this immunoassay was validated by eight brain tissue samples. The results were found to be compatible with the results of the real-time reverse transcription-polymerase chain reaction (RT-PCR) assay, indicating the potential applicability of this method for RABV diagnosis.