Ultrathin Graphdiyne/Graphene Heterostructure as a Robust Electrochemical Sensing Platform

A novel biosensing strategy on the dynamic and on-site detection of Vibrio coralliilyticus eDNA for coral health warnings

Heat stress and coral diseases are the predominant factors causing the degradation of coral reef ecosystems. Over recent years, Vibrio coralliilyticus was identified as a temperature-dependent pathogen causing tissue lysis in Pocillopora damicornis and one of the primary pathogens causing bleaching and mortality in other corals. Yet current detection techniques for V. coralliilyticus rely primarily on qPCR and ddPCR, which cannot meet the requirements for non-invasive and real-time detection. Herein, we developed an effective electrochemical biosensor modified by an Au-MoS2/rGO (AMG) nanocomposites and a specific capture probe to dynamically detect V. coralliilyticus environment DNA (eDNA) in aquarium experiments, with a lower limit of detection (0.28 fM) for synthetic DNA and a lower limit of quantification (9.8 fg/µL, ∼0.86 copies/µL) for genomic DNA. Its reliability and accuracy were verified by comparison with the ddPCR method (P > 0.05). Notably, coral tissue started to lyse at only 29 °C when the concentration of V. coralliilyticus increased abruptly to 880 copies/µL, indicating the biosensor could reflect the types of pathogen and health risks of corals under heat stress. Overall, the novel and reliable electrochemical biosensing technology provides an efficient strategy for the on-site monitoring and early warning of coral health in the context of global warming.

Co4+ in porous ZIF-67-derives intercalating-bridging adsorption of 2-reaction sites for simultaneous 2-electron transfer toward sensitive detection of uric acid

Metal-organic frameworks (MOFs) have been used to detect uric acid (UA), but still very challenging to achieve a low detection limit due to the low inferior conductivity of MOFs. Herein, three different N-doped ZIF-67-derived carbons were synthesized for the first time by one-step co-pyrolysis of 2-methylimidazole with cobalt nitrate (CN), cobalt acetate (CA) or cobalt chloride (CC) toward UA sensing. Afterwards, the cobalt nitrate-derived Co particle (Co/CN) supported by N-doped ZIF-67-derived carbon displays extremely low detection limit and high sensitivity for UA, outperformed all reported MOFs-based UA sensors. More interestingly, it was discovered that the high valence Co4+ within the Co/CN sample produced in high-acidic environment can intercalate in the frame for a bridge adsorption between two reaction sites, which boosted simultaneous 2-electron transfer, while Co3+ only allows an end-adsorption structure for one-electron transfer being the rate determining step. Furthermore, the bridge adsorption mode of UA on Co4+ -based catalyst was also verified by theoretical DFT calculations and XPS experiment. This work holds great promise for a selective and sensitive UA sensor for practical bioscience and clinic diagnostic applications while shedding lights in fundamental research for innovative designs and developments of high-sensitive electrochemical sensors.

Dendritic quinary PtRhMoCoFe high-entropy alloy as a robust immunosensing nanoplatform for ultrasensitive detection of biomarker

Recently, high-entropy alloys have superior physicochemical properties as compared to conventional alloys for their glamorous "cocktail effect". Nevertheless, they are scarcely applied to electrochemical immunoassays until now. Herein, uniform PtRhMoCoFe high-entropy alloyed nanodendrites (HEANDs) were synthesized by a wet-chemical co-reduction method, where glucose and oleylamine behaved as the co-reducing agents. Then, a series of characterizations were conducted to illustrate the synergistic effect among multiple metals and fascinating structural characteristics of PtRhMoCoFe HEANDs. The obtained high-entropy alloy was adopted to build a electrochemical label-free biosensor for ultrasensitive bioassay of biomarker cTnI. In the optimized analytical system, the resultant sensor exhibited a dynamic linear range of 0.0001-200 ng mL-1 and a low detection limit of 0.0095 pg mL-1 (S/N = 3). Eventually, this sensing platform was further explored in serum samples with satisfied recovery (102.0 %). This research renders some constructive insights for synthesis of high-entropy alloys and their expanded applications in bioassays and bio-devices.

Harnessing Graphdiyne for Selective Cu2+ Detection: A Promising Tool for Parkinson's Disease Diagnostics and Pathogenesis

Cu2+ accelerates the viral-like propagation of α-synuclein fibrils and plays a key role in the pathogenesis of Parkinson's disease (PD). Therefore, the accurate detection of Cu2+ is essential for the diagnosis of PD and other neurological diseases. The Cu2+ detection process is impeded by substances that have similar electrochemical properties. In this study, graphdiyne (GDY), a new kind of carbon allotrope with strong electron-donating ability, was utilized for the highly selective detection of Cu2+ by taking advantage of its outstanding adsorption capacity for Cu2+. Density functional theory (DFT) calculations show that Cu atoms are adsorbed in the cavity of GDY, and the absorption energy between Cu and C atoms is higher than that of graphene (GR), indicating that the cavity of GDY is favorable for the adsorption of Cu atoms and electrochemical sensing. The GDY-based electrochemical sensor can effectively avoid the interference of amino acids, metal ions and neurotransmitters and has a high sensitivity of 9.77 μA·μM-1·cm-2, with a minimum detectable concentration of 200 nM. During the investigating pathogenesis and therapeutic process of PD with α-synuclein as the diagnostic standard, the concentration of Cu2+ in cells before and after L-DOPA and GSH treatments were examined, and it was found that Cu2+ exhibits high potential as a biomarker for PD. This study not only harnesses the favorable adsorption of the GDY and Cu2+ to improve the specificity of ion detection but also provide clues for deeper understanding of the role of Cu2+ in neurobiology and neurological diseases.

Highly selective detection and removal of mercury ions in the aquatic environment based on magnetic ZIF-71 multifunctional composites with sufficient chlorine functional groups

The development of both detection and removal technologies for heavy metal ions is of great importance. Most of the existing adsorbents that contain oxygen, nitrogen or sulfur functional groups can remove heavy metals, but achieving both selective detection and removal of a single metal ion is difficult because they bind to a wide range of heavy metal ions. Herein, we selected zeolite imidazolium hydrochloride framework-71 (ZIF-71) with sufficient chlorine functional groups to fabricate magnetic ZIF-71 multifunctional composites (M-ZIF-71). M-ZIF-71 had a large specific surface area, excellent water stability, and good magnetic properties, which made M-ZIF-71 conducive to the separation and recovery of adsorbents and the assembly of electrodes. M-ZIF-71 exhibited high selectivity, wide linear range (1-500 μg/L), and low detection limit (0.32 μg/L) for electrochemical detection of mercury ions (Hg2+). Meanwhile, M-ZIF-71 demonstrated rapid Hg2+ adsorption with a high capacity of 571.2 mg/g and excellent recyclability. The high selectivity for Hg2+ was attributed to the powerful affinity of highly electronegative chlorine and Hg2+. Moreover, XPS spectra demonstrated the interaction between chlorine and Hg2+. This work provides a new inspiration for applications in the targeted monitoring and removal of heavy metal pollution.

Modified exfoliated graphene functionalized with carboxylic acid-group and thionine on a screen-printed carbon electrode as a platform for an electrochemical enzyme immunosensor

An enzyme immunoassay was developed based on the coulometric measurement of immunoglobulin M (IgM) against Hantaan viruses (HTNV) by using virus-like particles (VLPs) as recognition molecules. The surface functionalization of screen-printed carbon electrodes (SPCEs) was achieved through paste-exfoliated graphene that was modified with a COOH group and a thionine mediator through supramolecular-covalent scaffolds, on SPCEs by using the binder contained in the ink. After the covalent immobilization of the antibody, the sensor was used for the sandwich enzyme immunoassay of IgM against HTNV. By using HTNV VLPs as the second recognization molecules, the resulting sensor efficiently monitored the reaction of IgM against HTNV and anti-IgM antibody with high specificity. By attaching HTNV nucleocapsid protein antibody conjugate with horseradish peroxidase (HRP) onto VLPs, the signal response of the assay was derived from the coulometric measurement of H2O2 reduction mediated by thionine on the electrode surface after the application of a potential (- 0.2 V vs. Ag/AgCl). The ratio of charges measured before or after H2O2 addition was used to quantify IgM because these charges could be used as background charges or total charges, respectively. The ratio exhibited good agreement with IgM concentration within a range 0.1 to 1000 pg mL-1, and a detection limit of 0.06 pg mL-1 was obtained. The assay demonstrated high sensitivity and specificity toward HTNV-specific IgM in serum.

New insights into the on-site monitoring of probiotics eDNA using biosensing technology for heat-stress relieving in coral reefs

Coral probiotics can improve the tolerance of corals to heat stress, thus mitigating the process of coral thermal bleaching. Sensitive and specific detection of coral probiotics at low abundances is highly desirable but remains challenging, especially for rapid and on-site detection of coral probiotics. Since the electrochemical biosensor has been recently used in the field of environmental DNA (eDNA) detection, herein, an efficient electrochemical biosensor was developed based on CoS2/CoSe2-NC HNCs electrode material with a specific DNA probe for the C. marina detection. After optimization, the lower limit of detection (LOD) values of such biosensors for the target DNA and genomic DNA were 1.58 fM and 6.5 pM, respectively. On this basis, a portable device was constructed for the practical detection of C. marina eDNA, and its reliability and accuracy were verified by comparison with the ddPCR method (P > 0.05). For each analysis, the average cost was only ∼ $1.08 and could be completed within 100 min with reliable sensitivity and specificity. Overall, the biosensor could reflect the protective effect of probiotics on coral heat stress, and the proposed technique will put new insights into the rapid and on-site detection of coral probiotics to assist corals against global warming.

First-principles simulation of X-ray spectra of graphdiyne and graphdiyne oxides at the carbon K-edge

The experimental C 1s near-edge X-ray absorption fine-structure (NEXAFS) spectra of graphdiyne (GDY) show an evident change at different exposure periods, which is explained by oxidation. Herein, to better understand the structure-spectra relationship and the influence of oxidization, we performed a first-principles simulation of the NEXAFS spectra and X-ray photoelectron spectra (XPS) of both pure GDY and its four typical graphdiyne oxides (GDO) at the carbon K-edge. Pure GDY contains one sp2-hybridized (C1) and two sp-hybridized (C2, C3) carbons, while oxidation introduces more nonequivalent carbons. The experimental NEXAFS spectrum exhibits the lowest peak at ca. 285.8 eV. It was found that the C 1s → π* excitation from the sp2-hybridized carbon atoms (C1) in pure GDY and the sp-hybridized atoms (C2, C3) in GDOs contributes to this peak. The two weak resonances at around 289.0 and 290.6 eV in the experiment are contributed by the carbon atoms bonded to the oxygen atoms. Meanwhile, we found that oxidization leads to an increase in the C 1s ionization potentials (IPs) by 0.3-2.7 eV, which is consistent with the XPS experiments. Our calculations provide a clear explanation of the structure-spectra relationships of GDY and GDOs, and the signatures are useful for estimating the degree of oxidation.

A proof-of-concept electroreduction-free anodic stripping voltammetry analysis of Ag(I) based on S,N-Ti3C2Tx MXene nanoribbons

Herein, by preparing sulfur and nitrogen co-doped Ti3C2Tx MXene nanoribbons (S,N-Ti3C2TxR) as a sensing material, a sensitive and novel electroreduction-free anodic stripping voltammetry strategy was designed to detect Ag(I) (Ag+) for the first time, which can successfully avoid the power-consuming electroreduction step, achieving simple, sensitive and efficient detection for Ag+ with a low detection limit and wide linearity.

Target-Controlled Redox Reaction and Ru(II) Release of a Smart Metal-Organic Framework Nanomaterial for Highly Sensitive Ratiometric Homogeneous Electroanalysis of Cadmium(II)

In this work, a highly sensitive ratiometric homogeneous electroanalysis (HEA) strategy of cadmium(II) (Cd2+) was proposed via a Cd2+-controlled redox reaction and Ru(bpy)32+ (Ru(II)) release from a smart metal-organic framework (MOF) nanomaterial. For achieving this purpose, Ru(II) was entrapped ingeniously into the pores of an MOF material (UiO-66-NH2) and subsequently gated by the double-strand hybrids of a Cd2+-aptamer (Apt) and its complementary sequences (CP) to form a novel smart nanomaterial (denoted as Ru@UiO-66-NH2); meanwhile, Fe(III) was selected as an additional probe present in electrolyte to facilitate the Ru(II) redox reaction: Fe(III) + Ru(II) → Fe(II) + Ru(III). Owing to the strong binding effect of the Cd2+ target to the specific Apt, the Apt-CP hybridization at Ru@UiO-66-NH2 would be destroyed in the presence of Cd2+, and the related Apt was further induced away from the smart nanomaterial, leading to the opening of the gate and release of Ru(II). Meanwhile, the released Ru(II) was quickly oxidized chemically by Fe(III) to Ru(III). On the basis of the generated Ru(III) and consumed Fe(III), the ratio of the reduction currents between Ru(III) and Fe(III) exhibits an enhancement and it is dependent on the level of Cd2+; thus, a novel HEA strategy of Cd2+ was then designed. Under the optimal conditions, the HEA sensor shows a wide linearity ranging from 10.0 pM to 500.0 nM, and the achieved detection limit of Cd2+ is 3.3 pM. The as-designed ratiometric HEA strategy not only offers a unique idea to realize a simple and sensitive assay for Cd2+ but also possesses significant potential as an effective tool to be introduced for other target analysis just via altering the specific Apt.

A metal-organic framework regulated graphdiyne-based electrochemiluminescence sensor with a electrocatalytic self-acceleration effect for the detection of di-(2-ethylhexyl) phthalate

In this work, a super-sensitive electrochemiluminescence (ECL) aptamer sensor was constructed using a multiple signal amplification strategy to realize ultra-sensitive detection of di-(2-ethylhexyl) phthalate (DEHP). The incorporation of a highly efficient electrocatalytic metal-organic framework (NH2-Zr-MOF) and graphdiyne (GDY) composite has significantly enhanced the overall electrochemically active surface area, facilitating electron transfer during the entire electrochemical reaction process, and the large number of pores in graphdiyne and NH2-Zr-MOF limited a series of redox reactions within a certain range. This resulted in the generation of a greater number of SO4˙- radicals, thereby boosting the ECL intensity of the GDY in the K2S2O8 system. To increase the performance of the sensor even further, sodium ascorbate (NaAsc) as an accelerator was added to the co-reactant system. Additionally, nitrogen micro-nano bubbles with higher stability and stronger mass transfer have been introduced into the ECL system for the first time. Based on these, the aptamer as the recognition element realized the ultra-sensitive detection of DEHP in the linear range of 1.0 × 10-12 to 1.0 × 10-4 mg mL-1 with the limit of detection (LOD) of 2.43 × 10-13 mg mL-1. In summary, we have utilized the electrocatalytic activity of the porous MOF and the reducing capability of sodium ascorbate to enhance the ECL emission of GDY, which has been successfully applied to the detection of DEHP in water samples.

Prospects of 2D graphdiynes and their applications in desalination and wastewater remediation

Water is an indispensable part of human life that affects health and food intake. Water pollution caused by rapid industrialization, agriculture, and other human activities affects humanity. Therefore, researchers are prudent and cautious regarding the use of novel materials and technologies for wastewater remediation. Graphdiyne (GDY), an emerging 2D nanomaterial, shows promise in this direction. Graphdiyne has a highly symmetrical π-conjugated structure consisting of uniformly distributed pores; hence, it is favorable for applications such as oil-water separation and organic-pollutant removal. The acetylenic linkage in GDY can strongly interact with metal ions, rendering GDY applicable to heavy-metal adsorption. In addition, GDY membranes that exhibit 100% salt rejection at certain pressures are potential candidates for wastewater treatment and water reuse via desalination. This review provides deep insights into the structure, properties, and synthesis methods of GDY, owing to which it is a unique, promising material. In the latter half of the article, various applications of GDY in desalination and wastewater treatment have been detailed. Finally, the prospects of these materials have been discussed succinctly.

Ultrasensitive and on-site eDNA detection for the monitoring of crown-of-thorns starfish densities at the pre-outbreak stage using an electrochemical biosensor

The coral reef crisis has significantly intensified over the last decades, mainly due to severe outbreaks of crown-of-thorns starfish (COTS). Current ecological monitoring has failed to detect COTS densities at the pre-outbreak stage, thus preventing early intervention. In this work, we developed an effective electrochemical biosensor modified by a MoO₂/C nanomaterial, as well as a specific DNA probe that could detect trace COTS environmental DNA (eDNA) at a lower detection limit (LOD = 0.147 ng/μL) with excellent specificity. The reliability and accuracy of the biosensor were validated against the standard methods by an ultramicro spectrophotometer and droplet digital PCR (p > 0.05). The biosensor was then utilized for the on-site analysis of seawater samples from SYM-LD and SY sites in the South China Sea. For the SYM-LD site suffering an outbreak, the COTS eDNA concentrations were 0.33 ng/μL (1 m, depth) and 0.26 ng/μL (10 m, depth), respectively. According to the ecological survey, the COTS density was 500 ind/hm² at the SYM-LD site, verifying the accuracy of our measurements. At the SY site, COTS eDNA was also detected at 0.19 ng/μL, but COTS was not found by the traditional survey. Hence, larvae were possibly present in this region. Therefore, this electrochemical biosensor could be used to monitor COTS populations at the pre-outbreak stages, and potentially serve as a revolutionary early warning method. We will continue to improve this method for picomolar or even femtomolar detection of COTS eDNA.

An ingenious designed dual mode self-powered biosensing platform based on graphdiyne heterostructure substrate for instant hepatocarcinoma marker detection

We report here for the first time a self-powered biosensing platform based on graphene/graphdiyne/graphene (GDY-Gr) heterostructure substrate material for ultrasensitive hepatocarcinoma marker (microRNA-21) detection in both electrochemical and colorimetric test modes. The dual-mode signal intuitively displayed on a smartphone fundamentally improves the detection accuracy. In electrochemical mode, the calibration curve is established in the linear range of 0.1-10000 fM, and the detection limit is as low as 0.333 fM (S/N = 3). Simultaneously, colorimetric analysis of the miRNA-21 is realized by using ABTS as an indicator. The detection limit is confirmed as 32 fM (S/N = 3), and miRNA-21 of concentration from 0.1 pM to 1 nM exhibit a linear relationship with R2 = 0.9968. Overall, the combination of GDY-Gr and multiple signal amplification strategy significantly improved the sensitivity by 310 times compared with traditional enzymatic biofuel cells (EBFCs) based detection platform, showing broad application prospects for on-site analysis and future mobile medical services.

Nitrogen and fluoride co-doped graphdiyne with metal-organic framework (MOF)-derived NiCo2O4-Co3O4 nanocages as sensing layers for ultra-sensitive pesticide detection

Heteroatom doped graphdiyne (GDY) has been demonstrated to be an effective strategy for achieving outstanding electrochemical properties, including improved electrocatalytic activity, tunable electronic properties and high electronic conductivity, by producing numerous heteroatomic defects as well as active sites. Extensive efforts have been devoted to the issue of single element doping of GDY. Introducing two or more kinds of heteroatoms into GDY materials may create a synergic effect between the co-dopants, thus generating superior electrochemical performance. Nevertheless, little research on multiple elements co-doped GDY, especially in the application of constructing electrochemical biosensor. Herein, nitrogen and fluoride co-doped GDY (N-F-GDY) has been synthesized and employed to combine with NiCo₂O₄-Co₃O₄ hollow multishelled nanocages to establish an ultrasensitive electrochemical biosensor for the assay of pesticide residue. The as-prepared electrochemical biosensor possesses a wide linear range of 0.448 pM-44.8 nM for monocrotophos detection and a low detection limit of 0.0166 fM (S/N = 3).

Homogeneous voltammetric sensing strategy for lead ions based on aptamer gated methylthionine chloride@UiO-66-NH2 framework as smart target-stimulated responsive nanomaterial

Herein an innovative electrochemical method is proposed for the determination of lead ions (Pb²⁺) based on a homogeneous voltammetric (HVC) sensing strategy using an aptamer gated methylthionine chloride@UiO-66-NH₂ framework as a smart target-stimulated responsive material. The proposed HVC sensor exhibits excellent sensing performance: ultralow detection limit (0.166 pM) and wide linearity (5.0 pM-500.0 nM), simultaneously, it avoids electrodeposition processes and it is simple to modify the electrode compared to previous electrochemical methods for Pb²⁺ detection. Thus our method shows great potential in the highly efficient detection of Pb²⁺ and other heavy metal ions by simply altering the related specific aptamer.

Decoration of alkalization-intercalated Ti3C2 with ZIF-8@ZIF-67-derived N-doped carbon nanocage for detecting 4-nitrophenol

The highly effective alk-Ti₃C₂/bimetallic Co, Zn embedded N-doped carbon (Co-Zn-NC) composite was fabricated by a convenient self-assembled method strategy and applied to  the reduction of 4-nitrophenol(4-NP). Co-Zn-NC nanocage was synthesized by using designed core-shell ZIF-8@ZIF-67 as sacrificial template. The Co-Zn-NC was prepared by pyrolysis of ZIF-8@ZIF-67 at 900 °C with high-specific surface area and hollow structure, which facilitates the dispersion of Co species and produces abundant Co-Nx active sites. In addition, the electrochemical property and specific surface area of Ti₃C₂ were improved by alkaline treatment. As a result, compared with alk-Ti₃C₂ and Co-Zn-NC, the alk-Ti₃C₂/Co-Zn-NC sensor showed higher activity and stability in detecting 4-NP. The alk-Ti₃C₂/Co-Zn-NC sensor has a wide determination range of 2-500 μM and a low detection limit of 0.23 μM for 4-NP. In addition, the newly developed alk-Ti₃C₂/Co-Zn-NC sensor displayed satisfactory reproducibility and  good stability in detecting 4-NP in aqueous samples.

Real-Time Biosensor Platform Based on Novel Sandwich Graphdiyne for Ultrasensitive Detection of Tumor Marker

Realization of a highly sensitive analysis and sensing platform is important for early-stage tumor diagnosis. In this work, a self-powered biosensor with a novel sandwich graphdiyne (SGDY) combined with an aptamer-specific recognition function was developed to sensitively and accurately detect tumor markers. Results indicated that the detection limits of microRNA (miRNA)-21 and miRNA-141 were 0.15 and 0.30 fM (S/N = 3) in the linear range of 0.05-10000 and 1-10000 fM, respectively. The newly designed platform has great promise for early-stage tumor diagnosis.