Highly pH-Responsive Sensor Based on a EuIII Metal-Organic Framework with Efficient Recognition of Arginine and Lysine in Living Cells

A facile and intelligent detection method for diclazuril based on a stable dual emissive Eu3+-dopped metal-organic framework

Diclazuril (DIC) is a broad-spectrum anti-coccidiosis drug of the triazine class, widely used in poultry farming. The overuse of DIC may lead to its accumulation in animal bodies, which may enter the food chain and threaten human health. In this work, we fabricated a stable Eu3+-doped UiO-66 fluorescence sensor (EuUHIPA-30) for the sensitive detection of DIC. Among 20 veterinary drugs, the fluorescence of EuUHIPA-30 selectively responds to DIC, with a low detection limit (0.19 μM) and fast response (10 s). EuUHIPA-30 is recyclable and can detect DIC in chicken and eggs with good recoveries. Moreover, a smartphone-integrated paper-based sensor enables the instrument-free, rapid, visual, and intelligent detection of DIC in chickens and eggs. This work provides a promising candidate for practical fluorescent DIC sensing in animal-derived food to promote food safety.

A green approach to encapsulate proteins and enzymes within crystalline lanthanide-based Tb and Gd MOFs

In this work, bovine serum albumin (BSA) and Aspergillus sp. laccase (LC) were encapsulated in situ within two lanthanide-based MOFs (TbBTC and GdBTC) through a green one-pot synthesis (almost neutral aqueous solution, T = 25 °C, and atmospheric pressure) in about 1 h. Pristine MOFs and protein-encapsulated MOFs were characterized through wide angle X-ray scattering, scanning electron microscopy, thermogravimetric analysis, Fourier transform infrared and Raman spectroscopies. The location of immobilized BSA molecules, used as a model protein, was investigated through small angle X-ray scattering. BSA occurs both on the inner and on the outer surface of the MOFs. LC@TbBTC, and LC@GdBTC samples were also characterized in terms of specific activity, kinetic parameters, and storage stability both in water and acetate buffer. The specific activity of LC@TbBTC was almost twice that of LC@GdBTC (10.8 μmol min-1 mg-1vs. 6.6 μmol min-1 mg-1). Both biocatalysts showed similar storage stabilities retaining ∼60% of their initial activity after 7 days and ∼20% after 21 days. LC@TbBTC dispersed in acetate buffer exhibited a higher storage stability than LC@GdBTC. Additionally, terbium-based MOFs showed interesting luminescent properties. Together, these findings suggest that TbBTC and GdBTC are promising supports for the in situ immobilization of proteins and enzymes.

Reversible single-crystal-to-single-crystal transition in Gd(III) metal-organic frameworks induced by heat and solvents with a significant magnetocaloric effect

The design and synthesis of a Gd(III) metal-organic framework with the formula [Gd4(BTDI)3(DMF)4]n (JXUST-40, H4BTDI = 5,5'-(benzo[c][1,2,5]thiadiazole-4,7-diyl)diisophthalic acid) are reported hererin. Interestingly, a reversible single-crystal-to-single-crystal transition between JXUST-40 and {[Gd4(BTDI)3(H2O)4]·6H2O}n (JXUST-40a) was achieved under the stimulation of heat and solvents. Both JXUST-40 and JXUST-40a exhibited good stability when soaked in common solvents and aqueous solutions with pH values of 1-12. Magnetic studies showed that JXUST-40a has a larger magnetocaloric effect with -ΔSmaxm = 26.65 J kg-1 K-1 at 2 K and 7 T than JXUST-40 due to its larger magnetic density. Structural analyses indicated that the coordinated solvent molecules play a crucial role in the coordination environment around the Gd(III) ions and the change in the framework, ultimately leading to the changes in the pore size and magnetism between JXUST-40 and JXUST-40a. In addition, both isomorphic [Dy4(BTDI)3(DMF)4]n (JXUST-41) and {[Dy4(BTDI)3(H2O)4]·6H2O}n (JXUST-41a) displayed slow magnetic relaxation behaviour.

Near-infrared fluorescent probe with large Stokes shift for specific detection of lysine

A new near-infrared (NIR) fluorescent probe CL based on coumarin- dicyanoisophorone was synthesized. Addition of Lys to probe CL solution in DMF/H2O (9:1, v/v) medium resulted in noticeable enhancement in the intensity of the fluorescence emission at 702 nm, accompanying distinct color change from yellow to pink. While addition of other amino acids and biothiols (Gly, Hcy, GSH, Glu, Val, Tyr, Arg, Trp, Lys, His, Leu, Phe, Asp and Met) did not bring about substantial changes in both fluorescence emission and color. The detection limit was calculated to be 0.51 μM. Job's plot test revealed that probe CL and Lys formed a complex of 1:1 stoichiometry. Probe CL showed high stability and could be used to recognize Lys in a wide pH range of 4.0-10.0. The sensing mechanism was proposed and verified by 1H NMR spectral measurement. The dual-modal fluorescence turn-on and colorimetric NIR probe with an extremely large Stokes shift of 280 nm may be utilized for highly specific and practical sensing of Lys.

Multiresponsive luminescent sensors for antibiotics and CrVI with two luminescent ZnII/CdII coordination complexes

Two new ZnII/CdII luminescent coordination polymers (CPs) based on the V-shaped bis(imidazole) ligand 3,6-bis (1H-benzo[d]imidazol-1-yl)-9-methyl-9H-carbazole (bbimc) with [1,1'-biphenyl]-4,4'-dicarboxylic acid ligand (H2bpdc) have been synthesized under solvothermal conditions: {[Zn(bbimc)(bpdc)]·DMF·2.5H2O} (CP 1), {[Cd(bbimc)(bpdc)]·2DMF} (CP 2). CP 1 and CP 2 both display a uninodal 4-c unimodal sql topology 2D framework with vertex symbols of {44·62}. In addition, the two identical 2D nets of CP 2 were interpenetrated each other to form a 2D + 2D → 3D and generate a 2-fold interpenetrating architecture. Moreover, sensing investigations of CP 1 and CP 2 revealed that both of compounds can be used as a highly sensitive and selective multi-responsive luminescent sensor for sensing Cr2O72-, CrO42- and antibiotics (TC: Tetracycline; CTC: Chlortetracycline) in H2O by exhibiting fluorescence quenching with significant quenching constants (Ksv = 1.369 × 104 M-1 (Cr2O72-), 2.003 × 104 M-1 (CrO42-), 5.343 × 104 M-1 (TC), 8.706 × 104 M-1 (CTC) for CP 1 and 4.452 × 104 M-1 (Cr2O72-), 2.119 × 104 M-1 (CrO42-), 4.175 × 104 M-1 (TC), 1.257 × 105 M-1 (CTC) for CP 2). The detection limit are 0.67 μM (Cr2O72-), 0.48 μM (Cr2O72-), 0.23 μM (TC), 0.14 μM (CTC) for CP 1 and 0.28 μM (Cr2O72-), 0.54 μM (CrO42-), 0.31 μM (TC), 0.098 μM (CTC) for CP 2, respectively. In addition, the probable fluorescence quenching mechanism was studied through experiment and theoretical calculation and the co-existance of competitive absorption (CA) and photoinduced electron transfer (PET) progress contributed to such sensing processes.

Dual-emissive Eu(III)-functionalized metal-organic frameworks for visual, rapid, and intelligent sensing of albendazole and albendazole sulfoxide in animal-origin food

Albendazole (ABZ), a benzimidazole-based anthelmintic, is widely used to treat helminth infections. The extensive and improper use of ABZ may cause drug residues in animal-origin food and anthelmintics resistance, which potentially threaten human health. Meanwhile, albendazole sulfoxide (ABZSO), a metabolite of ABZ, also exhibits toxic effects. Therefore, the detection of ABZ and ABZSO in animal-derived food is significantly necessary. Herein, a dual-emission europium fluorescent sensor (EuUHC-30) was rationally designed and constructed. EuUHC-30 exhibits high selectivity and sensitivity towards ABZ and ABZSO with a detection limit of 0.10 and 0.13 μM, respectively. Furthermore, EuUHC-30 was successfully applied for quantification of ABZ and ABZSO in milk and pig kidney, which were verified by HPLC analysis. Moreover, a smartphone-assisted EuUHC-30 fluorescent paper sensor was fabricated for the practical determination of ABZ and ABZSO in real food. Overall, this work provides a visual, rapid, and intelligent method for the detection of ABZ and ABZSO in animal-origin food.

Fluorescence sensing and device fabrication with luminescent metal-organic frameworks

Metal-organic frameworks (MOFs) are a novel class of hybrid porous multi-functional materials consisting of metal ions/clusters and organic ligands. MOFs have exclusive benefits due to their tunable structure and diverse properties. Luminescent MOFs (LMOFs) exhibit both porosity and light emission. They display abundant host and guest responses, making them conducive to sensing. Currently, LMOF sensing research is gaining more depth, with attention given to their device and practical applications. This work reviews recent advancements and device applications of LMOFs as chemical sensors toward ions, volatile organic compounds, biomolecules, and environmental toxins. Furthermore, the detection mechanism and the correlation between material properties and structure are elaborated. This analysis serves as a valuable reference for the preparation and efficient application of targeted LMOFs.

A pH-Stable Tb-MOF as Luminescence Sensor for Highly Sensitive Detection of Amino Acids through Diverse Sensing Mechanism

A luminescent Tb-MOF with excellent stability and dual-emitting properties was constructed with an amide-functionalized tetracarboxylate ligand. Tb-MOFs were initially assembled on one-dimensional Tb3+ chains, then formed a two-dimensional double-decker layer through the synergistic linking of organic ligands and bridging formic acid anions, and further fabricated the final three-dimensional structure through the connection of the organic ligands. Powder X-ray diffraction experiments revealed that Tb-MOFs not only exhibited excellent stability in water but also maintained structural integrity in the pH range of 2-12. Importantly, this Tb-MOF provided the first example of a metal-organic framework (MOF)-based luminescence sensor that can simultaneously detect two acid amino acids (aspartic and glutamic acids) through a turn-off sensing mechanism and two basic amino acids (lysine and arginine acids) through unusual turn-on and turn-off-on sensing mechanisms. Moreover, high sensitivity, low detection limit, and excellent recyclability of this sensor endow Tb-MOFs with great potential as a highly efficient amino acid fluorescence sensor in chemical detection and biological environments.

Smart Stimulation Response of a Pyrene-Based Lanthanide(III) MOF: Fluorescence Enhancement to HX (F and Cl) or R-COOH and Artificial Applicable Film on HCl Vapor Sensing

Toxic acids produced by industries are major hazards to the environment and human health, and luminescent pyrene-based crystalline metal-organic frameworks (MOFs) demonstrate promising performance in the detection of toxic acids. Herein, two novel isostructural 3D porous lanthanide MOFs, H3O·[Ln3(TBAPy)2(μ2-H2O)2(OH)2]·2DMA·2Diox·6.5H2O (Ln = Pr (1) and Ce (2); H4TBAPy (1,3,6,8-tetrakis(p-benzoic acid)pyrene); and DMA: N,N-dimethylacetamide) were synthesized, which showed alb topology. Based on the protonation and hydrogen bond mechanism, complex 1 could be used as a fluorescence recognition sensor for HX (X = F, Cl, Br, and I) acid solutions with different luminescence behaviors. It is worth noting that complex 1 exhibited high sensitivity in the fluorescence enhancement sensing of hydrofluoric acid, oxalic acid, and trichloroacetic acid. In particular, complex 1 had a low limit of detection (LOD) for OA (0.1 μM) and was applied to real monitoring of orange fruit samples. In addition, the PVA@1 film could selectively, sensitively, and quantitatively respond to hydrochloric acid (HCl) vapor through fluorescent quenching; due to its protonation and adsorption capacity, the LOD was 0.18 ppm. Therefore, the portable optical device, the PVA@1 film, can detect HCl gas in trace amounts, achieving the ultimate goal of real-time and rapid detection, which has potential application value for industrial production safety.

Highly Stable Rare Earth Metal-Organic Frameworks for Fluorescence Recognition of Folic Acid, Proton Conduction, and Magnetic Refrigeration

Four new isostructural rare earth metal-organic frameworks (RE-MOFs) were synthesized and full characterized, namely, {[(CH)2NH2]3[RE2(BTDBA)2(HCOO)]·5H2O·2DMF}n (H4BTDBA = (4',4'''-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis([1,1'-biphenyl]-3,5-dicarboxylic acid); RE = Eu (JXUST-34), Gd (JXUST-35), Tb (JXUST-36), and Dy (JXUST-37)). The single-crystal structures analysis shows that JXUST-34-37 are chain-based three-dimensional structures. Importantly, JXUST-34 exhibits excellent water, organic solvents, and acid-base stability, which can be used as a fluorescence sensor for folic acid and Al3+ with detection limits of 0.02 mM and 0.05 μM, respectively. The presence of free [(CH)2NH2]+ cations in the channels can engage the proton carrier during proton conduction. JXUST-34-37 display good proton conductivity, and the conductivities vary with relative humidity and temperatures, among which JXUST-37 has the highest conductivity of 9.66 × 10-3 S·cm-1 at 60 °C and 98% RH. The magnetic studies show that the -ΔSm of JXUST-35 reaches 16.13 J kg-1 K-1 at 2 K and ΔH = 7 T. JXUST-34-37 show multifunctional properties of fluorescence sensing, high proton conductivity, and magnetic refrigeration, which provides a new clue for the development of fluorescent-responsive, magnetic-refrigerant, and proton-conductive RE-MOF materials.

pH-Dependent Dual-Mode Detection toward Uranium by a Zinc-Tetraphenylethylene Fluorescent Metal-Organic Framework

An interpenetrated tetraphenylethylene-based fluorescent metal-organic framework (ECUT-180) with exceptional sensitivity, excellent selectivity, and fast response (less than 30 s) toward uranium was successfully prepared. Especially, in the prescence of uranyl, ECUT-180 displays significant fluorescence turn-on under pH 2-3, while fluorescence turn-off under pH 4-8. The corresponding detection limits were determined to be 2.92 ppb at pH 2 and 0.86 ppb at pH 8, both of which are lower than the average uranium content (3.3 ppb) in seawater. Mechanism investigation reveals that the fluorescence enhancement on the strong acid condition can be assigned to uranium adsorption, while the quenching is caused by the resonance energy transfer.

A gas-selective Zn-MOF exhibits selective sensing of Fe3+ ions by doping with Tb3

Here, a new Zn2+ metal organic framework, {[Me2NH2][Zn2(L)(DTZ)]·2DMF·3H2O}n (Zn-MOF), has been synthesized with low-symmetric carboxylic acid ligand 2,6 bis(2',5'-dicarboxyphenyl)pyridine (H4L) as the main ligand and 3,5-diamino-1,2,4-riazole (DTZ) containing an electron-rich N atom as an auxiliary ligand. Because of its high structural stability and adsorption properties, it can be used to efficiently separate CO2/CH4 and C2H2/CH4. In addition, Tb@Zn-MOF was obtained by doping with Tb3+ to partially replace Zn2+. A study of its luminescence sensing performance demonstrated that Tb@Zn-MOF showed intense luminescence properties and can be used for the directional detection of Fe3+ in aqueous solution. Furthermore, PXRD analysis, UV-vis spectroscopy and X-ray photoelectron spectroscopy (XPS) were also used to study possible luminescence sensing mechanisms. The recognition mechanism for Fe3+ ions is believed to be caused by electron transfer.

Europium- and Black Phosphorus-Functionalized Porphyrin as an l-Arginine Sensor and l-Arginine-Activated PDT/PTT Agent for Bacterial Treatment

The attenuation of bacterial metabolism provides an adjunct to the treatment of bacterial infections. To develop a bacterial eradication agent, a bioactivatable material (BP@Eu-TCPP) was designed and synthesized by coordination and reduction of europium(III) with thin-layer black phosphorus (BP) and tetrakis (4-carboxyphenyl) porphyrin (TCPP). The existence of the P-Eu bond and Eu2+ 3d5/2 in X-ray photoelectron spectroscopy confirmed the successful synthesis of BP@Eu-TCPP. This material showed high fluorescence sensitivity to l-Arginine (l-Arg) and the main binding ratio of BP@Eu-TCPP to l-Arg was ca. 1:2 or 1:3, with the limit of detection of 4.0 μM. The material also showed good photothermal properties and stability, with a photothermal conversion efficiency of 37.3%. Although metal coordination has blocked the generation of 1O2, the addition of l-Arg to BP@Eu-TCPP can restore 1O2 generation upon red light-emitting diode (LED) light irradiation due to the formation of water-soluble Arg-TCPP species. Additionally, BP@Eu-TCPP was enabled to change the bacterial membrane and interfered with the bacterial iron absorption that effectively contributes to bacterial eradication. Such BP@Eu-TCPP is promised to be a novel material for the detection of l-Arg and l-Arg-activated photodynamic therapy.

Reversible and Turn-On Fluorescence Detection of Phosphate in Aqueous Solution and Living Cell Imaging by Supramolecular Metallacycles with AIE-Active Ligands

Luminescent supramolecular metallacycles have attracted great interest as a new promising class of sensing substrates. In this work, two tetraphenylethene (TPE)-based diimidazole and dipyrazole ligands with the aggregation-induced emission (AIE) feature were designed for the construction of supramolecular tetragonal metallacycles 1-4 with two 90° mononuclear [(bpy)M]2+ or dinuclear [(bpy)2M2]4+ acceptors (bpy = 2,2'-dipyridine; M = Pd, Pt), in which the fluorescence can be quenched to an "off" state due to the ligand-to-metal charge transfer (LMCT). Metallacycle 1 was utilized as a fluorescence sensor for phosphate (PO43-) detection in aqueous solution by means of disassembly, leading to the release of the ligand. Additionally, the metallacycle can be regenerated through self-assembly via the introduction of Pd(II) acceptors. PO43- was detected using TPE-based metallacycles over a wide concentration range, with a detection limit as low as 2.1 × 10-8 M. Furthermore, sensor 1 also presented the semiquantitative visual detection ability for PO43- in the test paper mode via fluorescence changes. The aforementioned studies not only enhance the current research on fluorescent materials but also offer a strategy for the creation of stimuli-responsive supramolecular coordination complexes.