High-Speed Scanning Electrochemical Microscopy Method for Substrate Kinetic Determination: Application to Live Cell Imaging in Human Cancer

Cytochrome c oxidase deficiency detection in human fibroblasts using scanning electrochemical microscopy

Cytochrome c oxidase deficiency (COXD) is an inherited disorder characterized by the absence or mutation in the genes encoding for the cytochrome c oxidase protein (COX). COX deficiency results in severe muscle weakness, heart, liver, and kidney disorders, as well as brain damage in infants and adolescents, leading to death in many cases. With no cure for this disorder, finding an efficient, inexpensive, and early means of diagnosis is essential to minimize symptoms and long-term disabilities. Furthermore, muscle biopsy, the traditional detection method, is invasive, expensive, and time-consuming. This study demonstrates the applicability of scanning electrochemical microscopy to quantify COX activity in living human fibroblast cells. Taking advantage of the interaction between the redox mediator N, N, N', N'-tetramethyl-para-phenylene-diamine, and COX, the enzymatic activity was successfully quantified by monitoring current changes using a platinum microelectrode and determining the apparent heterogeneous rate constant k0 using numerical modeling. This study provides a foundation for developing a diagnostic method for detecting COXD in infants, which has the potential to increase treatment effectiveness and improve the quality of life of affected individuals.

Temperature Effect on the Electrochemical Current Response during Scanning Electrochemical Microscopy of Living Cells

Scanning electrochemical microscopy (SECM) is being used increasingly to monitor electrochemical processes at the interface of living cells and electrodes. This allows the detection and quantification of biomarkers that further the understanding of various diseases. Rapid SECM experiments are often carried out without monitoring the analyte solution temperature or are performed at room temperature. The reported research demonstrates that temperature control is crucial during SECM imaging of living cells to obtain reliable data. In this study, a SECM-integrated thermostatic ring on the sample stage enabled imaging of living biological cells in a constant height mode at various temperatures. Two-dimensional line scans were conducted while scanning single Adenocarcinoma Cervical cancer (HeLa) cells. Numerical modeling was carried out to evaluate the effect of the temperature on the electrochemical current response of living cells to compare the apparent heterogeneous rate constant (k0), representing cellular reaction kinetics. This study reveals that even slight temperature variations of approximately 2 °C affect the reaction kinetics of single living cells, altering the measured current during SECM.

In situ monitoring of functional activity of extracellular matrix stiffness-dependent multidrug resistance protein 1 using scanning electrochemical microscopy

Extracellular matrix (ECM) stiffness affects the drug resistance behavior of cancer cells, while multidrug resistance protein 1 (MRP1) on the cell membrane confers treatment resistance via actively transporting drugs out of cancer cells. However, the relationship between ECM stiffness and MRP1 functional activity in cancer cells remains elusive, mainly due to the technical challenge of in situ monitoring. Herein, we engineered in vitro cancer cell models using breast cancer cells (MCF-7 and MDA-MB-231 cells) as the reprehensive cells on polyacrylamide (PA) gels with three stiffness, mimicking different developmental stages of cancer. We in situ characterized the functional activity of MRP1 and investigated the effect of ECM stiffness on MRP1 of cancer cells before and after vincristine treatment using scanning electrochemical microscopy (SECM) with ferrocenecarboxylic acid (FcCOOH) as the redox mediator and endogenous glutathione (GSH) as the indicator. The SECM results show that the functional activity of MRP1 is enhanced with increasing ECM stiffness, and the MRP1-mediated vincristine efflux activity of MCF-7 cells is more affected by ECM stiffness than that of MDA-MB-231 cells. This work, for the first time, applied SECM to in situ and quantitatively monitor the functional activity of MRP1 in cancer cells in different tumor mechanical microenvironments, which could help to elucidate the mechanism of matrix stiffness-dependent drug resistance behavior in cancer cells.

SECM using FcCOOH as the redox mediator and endogenous GSH as the indicator was employed to investigate the effect of extracellular matrix stiffness on the functional activity of MRP1 in cancer cells in situ.

In situ monitoring of the effect of Cu2+ on the membrane permeability of a single living cell with a dual-electrode tip of a scanning electrochemical microscope

Here, an Au-Cu dual-electrode tip was designed to monitor the effect of Cu²⁺ on the membrane permeability of a single living cell in situ using scanning electrochemical microscopy. The probe approach curves (PACs) were obtained using potassium ferricyanide as a redox mediator. Meanwhile, according to the simulation, theoretical PACs could be acquired. Thus, the cell membrane permeability coefficient (P_m) values were obtained by overlapping the experimental PACs with the theoretical values. Cu²⁺ was directly generated by electrolyzing the Cu electrode of the dual-electrode tip to investigate its effect on the cell membrane permeability in situ. This work has potential value to improve the understanding of the mechanism of acute heavy metal damage on the cell membrane and will also help clarify the role of heavy metal ions in physiological or pathological processes.

Compressed Sensing Image Reconstruction of Scanning Electrochemical Microscopy Measurements Carried Out at Ultrahigh Scan Speeds Using Continuous Line Probes

Previous studies on scanning electrochemical microscopy (SECM) imaging with nonlocal continuous line probes (CLPs) have demonstrated the ability to increase areal imaging rates by an order of magnitude compared to SECM based on conventional ultramicroelectrode (UME) disk electrodes. Increasing the linear scan speed of the CLP during imaging presents an opportunity to increase imaging rates even further but results in a significant deterioration in image quality due to transport processes in the liquid electrolyte. Here, we show that compressed sensing (CS) postprocessing can be successfully applied to CLP-based SECM measurements to reconstruct images with minimal distortion at probe scan rates greatly exceeding the conventional SECM ″speed limit″. By systematically evaluating the image quality of images generated by adaptable postprocessing CS methods for CLP-SECM data collected at varying scan rates, this work establishes a new upper bound for CLP scan rates. While conventional SECM imaging typically uses probe scan speeds characterized by Péclet numbers (Pe) < 1, this study shows that CS postprocessing methods can allow for an accurate image reconstruction for Pe approaching 5, corresponding to an order of magnitude increase in the maximum probe scan speed. This upper limit corresponds to the onset of chaotic convective flows within the electrolyte for the probes investigated in this work, highlighting the importance of considering hydrodynamics in the design of fast-scanning probes.

Pharma-molecule Transport across Bacterial Membranes: Detection and Quantification Approaches by Electrochemistry and Bioanalytical Methods

Antibiotic resistance is a significant challenge encountered by healthcare systems on a global scale. Knowledge about membrane transport of antibiotics and other pharmacologically relevant molecules in bacteria is crucial towards understanding and overcoming antibiotic resistance, as drug resistance often depends on drug transport. This comprehensive literature review discusses the detection and quantification of membrane transport of pharma-molecules in bacteria and highlights the importance of molecule transport to antibiotic resistance. This review emphasizes electrochemical and electrophysiological methods of detection and quantification. The results of this literature review reveal a substantial diversity in methods and types of quantitative information collected.

Enhanced resolution of generator-collector studies of enzymatic structures by means of hydrodynamic scanning electrochemical microscopy

In this report, the effects of forced convection on scanning electrochemical microscopy (SECM) studies of enzymes in the context of the generator-collector mode (G/C mode) were investigated. Forced convection was generated via an electrical high precision stirrer integrated into the electrochemical cell. Circular spots of glucose oxidase were immobilized on a gold support serving as model substrate. The diffusion layer of enzymatically generated H₂O₂ was characterized recording probe scan curves (PSCs) in z-direction. Furthermore, the enzyme-modified surfaces were investigated via constant-height SECM imaging in feedback mode and in G/C mode. For methodical comparison all sets of experiments were performed in quiescent solution (conventional approach) and with forced convection, respectively. In contrast to a growing diffusion layer without forced convection by applying forced convection, a constant diffusion layer of produced H₂O₂ was observed. Hence, via hydrodynamic SECM time-independent images within a reasonable time scale of SECM measurements in G/C mode were enabled and their resolution was enhanced.

Scanning Gel Electrochemical Microscopy (SGECM): Lateral Physical Resolution by Current and Shear Force Feedback

Scanning gel electrochemical microscopy (SGECM) is a novel technique measuring local electrochemistry based on a gel probe. The gel probe, which is fabricated by electrodeposition of hydrogel on a microdisk electrode, immobilizes the electrolyte, and constitutes a two-electrode system upon contact with the sample. The contact area determines the lateral physical resolution of the measurement, and considering the soft nature of the gel it is essential to be well analyzed. In this work, the lateral physical resolution of SGECM is quantitatively studied from two aspects: (1) marking single sampling points by locally oxidizing Ag to AgCl and measuring their size; (2) line scan over reference samples with periodic topography and composition. The gel probe is approached to the sample by either current or shear force feedback, and the physical resolution of them is compared. For the optimal gel probe based on 25 μm diameter Pt disk electrode of R_g ≈ 2, the lateral physical resolution of SGECM at contact position is ca. 50 μm for current feedback and ca. 63 μm for shear force feedback. More importantly, the lateral physical resolution of SGECM can be flexibly tuned in the range of 14-78 μm by pulling or pressing the gel probe after touching the sample. In general, current feedback is more sensitive to gel-sample contact than shear force feedback. But the latter is more versatile, which is also applicable to nonconductive samples.

Effect of Substrate Stiffness on Redox State of Single Cardiomyocyte: A Scanning Electrochemical Microscopy Study

Mechanical microenvironment plays a key role in the regulation of the phenotype and function of cardiac cells, which are strongly associated with the intracellular redox mechanism of cardiomyocytes. However, the relationship between the redox state of cardiomyocytes and their mechanical microenvironment remains elusive. In this work, we used polyacrylamide (PA) gels with varying stiffness (6.5-92.5 kPa) as the substrate to construct a mechanical microenvironment for cardiomyocytes. Then we employed scanning electrochemical microscopy (SECM) to in situ characterize the redox state of a single cardiomyocyte in terms of the apparent rate constant (k_f) of the regeneration rate of ferrocenecarboxylic by glutathione (GSH) released from cardiomyocyte, which is the most abundant reactant of intracellular reductive-oxidative metabolic cycles in cells and can represent the redox level of cardiomyocytes. The obtained SECM results show that the cardiomyocytes cultured on the stiffer substrates present lower k_f values than those on the softer ones, that is, the more oxidative state of cardiomyocytes on the stiffer substrates compared to those on the softer ones. It proves the relationship between mechanical factors and the redox state of cardiomyocytes. This work can contribute to understanding the intracellular chemical process of cardiomyocytes during physiopathologic conditions. Besides, it also provides a new SECM method to in situ investigate the redox mechanism of cardiomyocytes at a single-cell level.

Recent Advances in Scanning Electrochemical Microscopy for Biological Applications

Scanning electrochemical microscopy (SECM) is a chemical microscopy technique with high spatial resolution for imaging sample topography and mapping specific chemical species in liquid environments. With the development of smaller, more sensitive ultramicroelectrodes (UMEs) and more precise computer-controlled measurements, SECM has been widely used to study biological systems over the past three decades. Recent methodological breakthroughs have popularized SECM as a tool for investigating molecular-level chemical reactions. The most common applications include monitoring and analyzing the biological processes associated with enzymatic activity and DNA, and the physiological activity of living cells and other microorganisms. The present article first introduces the basic principles of SECM, followed by an updated review of the applications of SECM in biological studies on enzymes, DNA, proteins, and living cells. Particularly, the potential of SECM for investigating bacterial and biofilm activities is discussed.

Scanning Gel Electrochemical Microscopy for Topography and Electrochemical Imaging

Scanning electrochemical probe techniques have been widely applied for analyzing the local electrochemical activity of surfaces and interfaces. In this work, we develop a new concept of carrying out local electrochemical measurements by localizing both the electrode and the electrolyte. This is achieved through a gel probe, which is prepared by electrodepositing chitosan-gelatin gel on a microdisk electrode. It is positioned in contact with the sample surface by shear force feedback. The preliminary results indicate that the topography of the sample can be mapped by tapping the probe and recording the coordinates at a given normalized shear force signal, while the local electrochemical activity can be retrieved from local measurements with the probe touching the sample surface. The technique is denoted as scanning gel electrochemical microscopy. As compared with existing techniques, it has a major advantage of operating in air with the electrolyte immobilized in gel. This would prevent the spreading and leakage of solution on the sample surface and may lead to field applications.