Electrochemiluminescence Resonance Energy Transfer System: Mechanism and Application in Ratiometric Aptasensor for Lead Ion

Novel Electrochemiluminescence Sensor for Dopamine Detection Based on Perylene Diimide/CuO Nanomaterials

Dopamine (DA) is an important catecholamine neurotransmitter and its abnormal concentration is closely related to diseases such as hypertension, Parkinson's disease and schizophrenia. Due to the advantages of high sensitivity and fast response for electrochemiluminescence (ECL), developing ECL sensors for detecting DA was very critical in clinical diagnosis. ECL resonance energy transfer (ECL-RET) was an effective signaling mechanism. However, the shortage of highly efficient ECL-RET pairs impeded the development of DA sensors. Herein, methyl-modified perylene diimide derivative (PDI-CH3) self-assembly nanorod materials as luminophores and CuO nanomaterials as acceptors were integrated into nanocomposites. An obvious ECL-RET was found in PDI-CH3/CuO nanocomposites. After PDI-CH3/CuO nanocomposites were treated with DA, a large increase in ECL intensity was observed. Then, PDI-CH3/CuO nanocomposites were taken as an ECL platform to detect DA. This ECL sensor exhibited a linear response to DA from 10-12 M to 10-8 M with a limit of detection of 0.20 pM. Compared with other sensors for DA detection, the constructed ECL sensor exhibited higher sensitivity. In addition, the novel ECL sensor in this work showed good practicability in a human serum sample.

Dual-mode electrochemical and electrochemiluminescence detection of dopamine based on perylene diimide self-assembly material

The self-assembly material N,N-bis-(3-dimethyl aminopropyl)-3,4,9,10-perylene tetracarboxylic acid diimide (PDI) is reported to show electrochemical (EC)/electrochemiluminescence (ECL) property for designing new dual-mode dopamine (DA) sensors. K2S2O8 significantly improved the EC reduction current at -0.346 V and ECL intensity at -0.25 V of the PDI self-assembly material. DA largely decreased the EC reduction current and ECL intensity of this homogeneous EC/ECL material due to the competitive consumption of K2S2O8 in the oxidization process of DA and the low electron conductivity of polyDA formed through the oxidization of DA by K2S2O8. In addition, the ECL quenching mechanism involved an energy-transfer process resulting from the collision between the produced o-benzoquinone species (oxidization of DA) and the excited state of PDI, which decreased the ECL intensity. This homogeneous EC/ECL material showed linear EC current response for DA from 5.0 nM to 50.0 µM with a detection of limit of 2.7 nM and linear ECL response for DA from 1.0 nM to 100.0 µM with a detection of limit of 0.41 nM. The proposed dual-mode EC/ECL sensors also showed good feasibility in urine sample analysis.

Sensitive detection of uric acid based on low-triggering-potential cathodic luminol electrochemiluminescence achieved by ReS2 nanosheets

The majority of previously reported cathodic electrochemiluminescence (ECL) systems often required very negative potential to be carried out, which has greatly limited their applications in the sensing field. Screening high-performance cathodic ECL systems with low triggering potential is a promising way to broaden their applications. In this work, rhenium disulfide nanosheets (ReS2 NS) have been revealed as an efficient co-promoter to realize low-triggering-potential cathodic luminol ECL. One strong cathodic ECL signal appeared at a potential of -0.3 V and one anodic ECL peak was obtained at -0.15 V under the reverse potential scan, which were caused by electrogenerated reactive oxygen species (ROS) from hydrogen peroxide. The generation of strong luminol ECL at low potential was the result of the electrocatalytic effect of ReS2 NS on the reduction of H2O2. The scavenging effect of uric acid (UA) on the ROS could significantly inhibit the cathodic ECL. As a result, an ECL sensor was proposed, which showed outstanding performance for the detection of UA in the range of 10 nM to 0.1 mM with a low detection limit of 1.53 nM. Moreover, the ECL sensor was successfully applied in the sensitive detection of UA in real samples. This work provides a new avenue to establish a low-potential cathodic ECL system, which will sufficiently expand the potential application of cathodic ECL in the sensing field.

Binary-amplifying electrochemiluminescence sensor for sensitive assay of catechol and luteolin based on HKUST-1 derived CuO nanoneedles as a novel luminophore

Herein, a highly novel and effective electrochemiluminescence (ECL) sensor based on metal-organic framework (MOF, HKUST-1) derived CuO nanoneedles (HKUST-1 derived CuO NNs), gold nanoparticles (AuNPs) and TiO2 was developed for ultrasensitive detection of catechol and luteolin. The HKUST-1 derived CuO NNs were employed as luminophore for the first time, which were successfully fabricated by using HKUST-1 as precursor. The results revealed that the HKUST-1 derived CuO NNs exhibit excellent ECL activity ascribed to its abundant active site and the high specific surface area, thus obviously promoting the separation and transfer of charge and further improving the current density of ECL sensor. To binary-amplify the signal of the ECL sensor, the AuNPs and TiO2 nano-materials with good biocompatibility, great electron transport efficiency and high catalytic activity were used as co-reaction accelerators in the ECL process. Dependent on the above brilliant strategy, the proposed ECL sensor achieved wide linear ranges from 3 × 10-9 - 1 × 10-4 M for catechol and 1 × 10-8 - 2 × 10-4 M for luteolin, with the detection limits of 1.5 × 10-9 M for catechol and 5.3 × 10-9 M for luteolin, respectively. Furthermore, the ECL sensor exhibited outstanding selectivity, repeatability, stability and obtained great feedback on determination of catechol and luteolin in actual samples. The method not only filled a gap in the ECL application of MOF-derived materials but also provided a novel sight for design other highly efficient luminescent materials.

Nanomaterials-based aptasensors: An efficient detection tool for heavy-metal and metalloid ions in environmental and biological samples

In light of potential risks of heavy metal exposure, diverse aptasensors have been developed through the combination of aptamers with nanomaterials for the timely and efficient detection of metals in environmental and biological matrices. Aptamer-based sensors can benefit from multiple merits such as heightened sensitivity, facile production, uncomplicated operation, exceptional specificity, enhanced stability, low immunogenicity, and cost-effectiveness. This review highlights the detection capabilities of nanomaterial-based aptasensors for heavy-metal and metalloid ions based on their performance in terms of the basic quality assurance parameters (e.g., limit of detection, linear dynamic range, and response time). Out of covered studies, dendrimer/CdTe@CdS QDs-based ECL aptasensor was found as the most sensitive option with an LOD of 2.0 aM (atto-molar: 10-18 M) detection for Hg2+. The existing challenges in the nanomaterial-based aptasensors and their scientific solutions are also discussed.

A Review on Low-Dimensional Nanomaterials: Nanofabrication, Characterization and Applications

The development of modern cutting-edge technology relies heavily on the huge success and advancement of nanotechnology, in which nanomaterials and nanostructures provide the indispensable material cornerstone. Owing to their nanoscale dimensions with possible quantum limit, nanomaterials and nanostructures possess a high surface-to-volume ratio, rich surface/interface effects, and distinct physical and chemical properties compared with their bulk counterparts, leading to the remarkably expanded horizons of their applications. Depending on their degree of spatial quantization, low-dimensional nanomaterials are generally categorized into nanoparticles (0D); nanorods, nanowires, and nanobelts (1D); and atomically thin layered materials (2D). This review article provides a comprehensive guide to low-dimensional nanomaterials and nanostructures. It begins with the classification of nanomaterials, followed by an inclusive account of nanofabrication and characterization. Both top-down and bottom-up fabrication approaches are discussed in detail. Next, various significant applications of low-dimensional nanomaterials are discussed, such as photonics, sensors, catalysis, energy storage, diverse coatings, and various bioapplications. This article would serve as a quick and facile guide for scientists and engineers working in the field of nanotechnology and nanomaterials.

Zinc-Air Battery-Based Self-Powered Sensor with High Output Power for Ultrasensitive MicroRNA let-7a Detection in Cancer Cells

Self-powered sensors do not require a power supply and are easy to miniaturize, which have potential for constructing wearable, portable, and real-time detection devices. However, it is challenging for the detection of low abundant targets due to the low output power density of fuel cells and much interference of complex biological environment. Herein, a new kind of photocatalytic zinc-air battery-based self-powered electrochemical sensor (ZAB-SPES) was constructed for the detection of microRNA let-7a (miRNA let-7a) by combining magnetic nanobeads (MBs) with a metal-organic framework loaded with glucose oxidase (MOFs@GOX). Poly(1,4-di(2-thienyl))benzene (PDTB) was used as the photocathode material, and the proposed ZAB-SPES had a high power density of 22.8 μW/cm², which was 2-3-fold of commonly used photofuel cells. MBs can capture and separate miRNA from complex samples quickly with a high separation efficiency of 99% within 60 s. The competitive reaction of oxygen reduction reaction between PDTB and MOFs@GOX would change the output power density of the ZAB-SPES. Based on the relationship between output power density and target concentration, the ZAB-SPES realized ultrasensitive detection of miRNA let-7a with a detection limit down to 1.38 fM. Furthermore, the successful detection of miRNA let-7a in A549 cancer cells indicated the great prospects of ZAB-SPES in clinical analysis and early diagnosis of cancers.

Signal-on fluorescent sensing strategy for Pb2+ detection based on 8-17 DNAzyme-mediated molecular beacon-type catalytic hairpin assembly circuit

Based on a Pb²⁺-specific 8-17 DNAzyme-induced catalytic hairpin assembly (CHA), a simple signal-on fluorescence strategy for lead ion detection was established. 8-17 DNAzyme was used as the recognition element of Pb²⁺, which catalyzed the cleavage of the RNA base embedded in the DNA substrate strand, while releasing part of the substrate strand (S') as CHA initiator. And two hairpin probes (H1 and H2-FQ) were designed according to the sequence of S' for CHA, in which H2-FQ was labeled with the fluorophore FAM and quencher BHQ-1 as fluorescent "molecular switch" based on fluorescence resonance energy transfer (FRET). In the presence of Pb²⁺, the CHA reaction was triggered to form a large number of H1-H2 complexes, enabling enzyme-free isothermal amplification and a signal-on fluorescence strategy. In the concentration range of 0.5-1000 nM, the fluorescence signal increases with the increase of Pb²⁺ concentration. The quantitative detection limit of Pb²⁺ by this method is 0.5 nM, which has better detection performance compared with the FQ-labeled 8-17 DNAzyme method. The established biosensor exhibits good specificity and can be effectively used for the detection of Pb²⁺ in real samples of river water and grass carp. Through ingenious nucleic acid sequence design, DNAzyme and CHA reactions are integrated to realize the enzyme-free isothermal amplifications and sensitive detection of Pb²⁺, which holds potential versatility in food supervision and environmental monitoring.

A simple electrochemiluminesecence aptasenor using a GCE/NCQDs/aptamers for detection of Pb

An electrochemiluminescence (ECL) aptasensor was prepared to detect Pb²⁺ with nitrogen-doped carbon quantum dots (NCQDs) as ECL materials. To prepare the working electrode, NCQDs with carboxyl groups were loaded on a glassy carbon electrode (GCE) and then Pb²⁺ aptamers were covalently bound to the NCQDs to form a stable GCE/NCQDs/aptamers. On addition of Pb²⁺, the chain aptamers change to a pb²⁺ G-quadruplex conformation, which lead to a large decrease in the ECL intensity. The variation of intensity and the logarithm of the Pb²⁺ concentration had a good linear relationship (R² = 0.998). The detection range was wide (50 pM to 387.9 nM) with a low detection limit (18.9 pM). In interference experiments, the ECL Pb²⁺ aptasensor did not suffer from interference and it had good stability. The NCQDs ECL aptasensor can detect Pb²⁺ quickly and accurately, and provides a fast and efficient method for detection of Pb²⁺. Compared with literatures, the Pb²⁺ aptasensor has simpler preparation process, lower cost; furthermore, it is more environmentally friendly.

Gold nanoparticle-based signal amplified electrochemiluminescence for biosensing applications

Since the content levels of biomarkers at the early stage of many diseases are generally lower than the detection threshold concentration, achieving ultrasensitive and accurate detection of these biomarkers is still one of the major goals in bio-analysis. To achieve ultrasensitive and reliable bioassay, it requires developing highly sensitive biosensors. Among all kinds of biosensors, electrogenerated chemiluminescence (ECL) based biosensors have attracted enormous attention due to their excellent properties. In order to improve the performance of ECL biosensors, gold nanoparticles (Au NPs) have been widely utilized as signal amplification tags. The introduction of Au NPs could dramatically enhance the performance of the constructed ECL biosensors via diverse ways such as electrode modification material, efficient energy acceptor in ECL resonant energy transfer (ECL-RET), reaction catalyst, surface plasmon resonance (SPR) enhancer, and as nanocarrier. Herein, we summarize recent developments and progress of ECL biosensors based on Au NPs signal amplification strategies. We will cover ECL applications of Au NPs as a signal amplification tag in the detection of proteins, metal ions, nucleic acids, small molecules, living cells, exosomes, and cell imaging. Finally, brief summary and future outlooks of this field will be presented.

An efficient aggregation-induced electrochemiluminescent immunosensor by using TiO2 nanoparticles as coreaction accelerator and energy donor for aflatoxin B1 detection

Herein, we fabricated a label-free ECL immunosensor for aflatoxin B₁ (AFB₁) detection. In this system, a small organic aggregation-induced electrochemiluminescence luminophore, 2,5-di-tetraphenylethylene-ylthiazolo [5,4-d] thiazole, was designed, named TPETTZ. Polyaniline-wrapped TiO₂ nanoparticles (PANI/TiO₂ NPs) complex was synthesized through one-step in situ oxidation polymerization of aniline, and performed excellent electrical conductivity and abundant amino groups. As an ECL accelerator, TiO₂ nanoparticles (TiO₂ NPs) promoted the oxidation of tri-n-propylamine (TPA) to generate more TPA^•; in addition, it also acted as a donor to improve the ECL intensity of TPETTZ (acceptor) through electrochemiluminescence resonance energy transfer (ECL-RET). Encouraged by the above, under the existence of TPA, TPETTZ displayed a strong and continuously stable ECL_anode signal due to the introduction of PANI/TiO₂ NPs. Therefore, the immunosensor was constructed for AFB₁ detection based on the quenching effect of target on the ECL signal, and a linearly decreasing ECL signal was obtained as the increasement of AFB₁ in the range of 75 fg/mL to 100 ng/mL, with a lower detection limit of 27.5 fg/mL. Moreover, the as-prepared sensing platform performed a satisfactory anti-interference, stability, and reproducibility, and appeared a good accuracy in walnut sample analysis, presenting a promising application in the future.

Aptamers functionalized hybrid nanomaterials for algal toxins detection and decontamination in aquatic system: Current progress, opportunities, and challenges

Purification and detection of algal toxins is the most effective technique to ensure that people have clean and safe drinking water. To achieve these objectives, various state-of-the-art technologies were designed and fabricated to decontaminate and detect algal toxins in aquatic environments. Amongst these technologies, aptamer-functionalized hybrid nanomaterials conjugates have received significant consideration as a result of their several benefits over other methods, such as good controllable selectivity, low immunogenicity, and biocompatibility. Because of their excellent properties, aptamer-functionalized hybrid nanomaterials conjugates are one of several remarkable agents. Several isolated aptamer sequences for algal toxins are addressed in this review, as well as aptasensor and decontamination aptamer functionalized metal nanoparticle-derived hybrid nanocomposites applications. In addition, we present diverse aptamer-functionalized hybrid nanomaterial conjugates designs and their applications for sensing and decontamination.

Chloramphenicol-activated electro-chemiluminescent behavior of BNQDs-Ru(phen)32+ system for ultra-sensitive sensing of chloramphenicol in pharmaceutical and milk samples

To improve the sensitivity for electro-chemiluminescent (ECL) detection of chloramphenicol (CAP), a common broad-spectrum antibiotic, boron nitride quantum dots (BNQDs) were prepared with excellent photoelectric property and low toxicity. After its structure and electrochemical property were investigated in detail, it was noted that the ECL signal of Ru(Phen)₃²⁺could be strengthened by the proposed BNQDs, which was further activated by ten's times in the presence of CAP. Under the optimized conditions, there was an excellent linear relationship between ΔECL and lgc_CAPin a wide linear range from 1.0 × 10^-10to 1.0 × 10^-6mol l^-1CAP. The detection limit was super-low to be 3.3 × 10^-11mol l^-1(S/N = 3). When applied for CAP detection in real pharmaceutical and food samples, the recoveries were between 97.8% and 105.7% with R.S.D. less than 3.3%. A possible CAP-activated ECL mechanism of BNQDs-Ru(phen)₃²⁺was also proposed. This work will offer a great potential for efficient monitoring of CAP pollution and clinical diagnosing of CAP-related diseases in future.

An overview of Structured Biosensors for Metal Ions Determination

The determination of metal ions is important for nutritional and toxicological assessment. Atomic spectrometric techniques are highly efficient for the determination of these species, but the high costs of acquisition and maintenance hinder the application of these techniques. Inexpensive alternatives for metallic element determination are based on dedicated biosensors. These devices mimic biological systems and convert biochemical processes into physical outputs and can be used for the sensitive and selective determination of chemical species such as cations. In this work, an overview of the proposed biosensors for metal ions determination was carried out considering the last 15 years of publications. Statistical data on the applications, response mechanisms, instrumentation designs, applications of nanomaterials, and multielement analysis are herein discussed.

Copper-Doped Terbium Luminescent Metal Organic Framework as an Emitter and a Co-reaction Promoter for Amplified Electrochemiluminescence Immunoassay

This work designed a signal amplification strategy for construction of a highly sensitive electrochemiluminescence (ECL) biosensor by doping Cu²⁺ in a terbium luminescent metal organic framework (Cu:Tb-MOF) to act as a co-reaction promoter, which enhanced the generation of SO₄^•- radical during the cathodic process in the presence of K₂S₂O₈ as a co-reactant. The porous and hollow morphology and the size of Cu:Tb-MOF could be efficiently tuned via changing the molar ratio of Cu²⁺ and Tb³⁺ and the reaction time, which were related to the specific surface area, pore diameter, and the ECL intensity of the MOF structure. To further improve the sensitivity of the ECL biosensor, H₂O₂ was introduced into the ECL system to act as another co-reaction promoter, leading to a new ECL mechanism involving dual co-reaction promoters. In view of the low electron transfer resistance of Cu:Tb-MOF, a label-free ECL immunosensor was conveniently constructed by co-immobilizing Cu:Tb-MOF and the capture antibody on the electrode surface. Using pro-gastrin-releasing peptide (ProGRP, a biomarker of small-cell lung cancer) as the model target, the proposed immunosensor exhibited excellent performance with a detection range of 1.0 pg·mL^-1 to 50 ng·mL^-1 and a limit of detection down to 0.68 pg·mL^-1 (3σ). This work demonstrated a strategy to use the MOF structures as both an emitter and a co-reaction promoter for amplified ECL emission and proposed an innovative route to extend the application of lanthanide MOFs.

A DNAzyme-Based Dual-Stimuli Responsive Electrochemiluminescence Resonance Energy Transfer Platform for Ultrasensitive Anatoxin-a Detection

An effective and precise electrochemiluminescence resonance energy transfer (ECL-RET), including the efficient regulation over the proximity of a donor and an acceptor and the reliable stimuli responsive as well as the avoidance of undesirable probes leakage, etc., is significant for the development of an accurate and sensitive ECL detection method; yet, the current literature in documentation involves only a limited range of such ECL-RET systems. Herein, we propose an ECL-RET strategy with dually quenched ultralow background signals and a dual-stimuli responsive, accurate signal output for the ultrasensitive and reliable detection of anatoxin-a (ATX-a). The dual quenching is accomplished by an integrated ECL-RET probe of metal organic frameworks (MOFs) encapsulated into Ru(bpy)₃²⁺ (Ru-MOF) (donor) coated with silver nanoparticles (AgNPs) shell (acceptor 1) and close proximity with DNA-ferrocene (Fc) (acceptor 2). Multistimuli responsive DNAzyme facilitated the accurate signal switch by both target ATX-a and hydrogen peroxide (H₂O₂). Because of the specific recognition of the aptamer toward ATX-a, an intricate design of the DNA sequence enabled the exposure of the Ag⁺-dependent DNAzyme sequence and H₂O₂ in situ generated Ag⁺ triggering a catalytic cleavage reaction to freely release the two ECL-RET energy acceptors, thus switching the ECL signal significantly and achieving ultrasensitive detection. It is noteworthy that AgNPs are key in this ECL-RET strategy, serving both as the gate-keepers for avoiding ECL probes leakage and also the ECL energy acceptors, and mostly importantly serving as the redox substrate for the subsequent DNAzyme catalytic signal switch. The proposed ECL-RET aptasensor for ATX-a detection displayed splendid monitoring performance with a quite low detection limit of 0.00034 mg mL^-1. This sensor not only led to the development of a dual-quenching ECL-RET system but also provided meaningful multistimuli responsive ECL biosensing platform construction, which shows a promising application prospect in complicated sample analysis.

A ratiometric electrochemiluminescence resonance energy transfer platform based on novel dye BODIPY derivatives for sensitive detection of lactoferrin

A ratiometric electrochemiluminescence resonance energy transfer (ECL-RET) platform depended on novel dye BODIPY derivatives was proposed for rapid detection of lactoferrin. This ECL-RET platform is composed of aptamer decorated BODIPY composites and C₆₀@BSA, in which BODIPY derivative is the ECL probe and can generate significant resonance energy transfer with K₂S₂O₈. BODIPY derivative and K₂S₂O₈ are used as built-in reference signal and calibration signal respectively to eliminate background signal and abnormal change signal by double signal self-calibration process. At the same time, C₆₀, as the accelerator of K₂S₂O₈, can effectively increase the ECL signal and further transfer as much energy as possible to BODIPY derivative. Under optimal conditions, the constructed ECL-RET platform exhibited sensitive detection of lactoferrin in the wide linear range of 10^-4- 850 ng/mL with a LOD of 42 fg/mL. Meanwhile, the proposed ECL-RET aptasensor demonstrated superior stability, specificity and reproducibility, displaying favorable application value in practical diagnosis of this method.

An improved structure-switch aptamer-based fluorescent Pb2+ biosensor utilizing the binding induced quenching of AMT to G-quadruplex

An improved aptamer-based fluorescent Pb²⁺ biosensor utilizing the binding induced quenching of AMT to G-quadruplex has been rationally designed with a LOD of 3.6 nM. The utility of the developed biosensor was demonstrated by the successful detection of Pb²⁺ in real complex clinical samples with satisfactory recovery and good reproducibility.

A ratiometric electrochemiluminescence sensing platform for robust ascorbic acid analysis based on a molecularly imprinted polymer modified bipolar electrode

Herein, a novel molecularly imprinted polymer (MIP) modified spatial-resolved "on-off" ratiometric electrochemiluminescence (ECL) sensing platform based on a closed bipolar electrode (BPE) has been reported for highly accurate and selective detection of ascorbic acid (AA). AA-imprinted MIP was decorated on the anode of the BPE, and Ru (bpy)₃²⁺ in the anode electrolyte served as anode-emitter, while ZnIn₂S₄ as the other ECL emitter was coated on the cathode. Rebinding of AA at anode promoted ECL response of ZnIn₂S₄ (440 nm) at cathode. Meanwhile, the ECL response at 605 nm decreased, arising from the hindered reaction of Ru (bpy)₃²⁺ on the anode surface. Therefore, an "on-off" BPE-ECL sensing platform was fabricated and showed distinguished performance in repeatability and selectivity thanks to the ratio correction effect and the specific recognition from MIP. The linear range for AA detection is from 50 nM to 3 μM with a low detection limit of 20 nM (S/N = 3). The assay deviation of the ratio responses largely declined by about 15 and 5 times compared with the ones from single pole in the aspect of repeatability and long-term stability, respectively. This work provides a reliable and stable sensing pattern for practical application, which also furnishes a strategy for designing simple and low-cost ECL sensing devices.

Sensitive photoelectrochemical assay of Pb2+ based on DNAzyme-induced disassembly of the "Z-scheme" TiO2/Au/CdS QDs system

Herein, based on DNAzyme-induced disassembly of the "Z-scheme" TiO₂/Au/CdS QDs system, a facile and sensitive photoelectrochemical biosensor was developed for lead ion assay and a low detection limit of 0.13 pM was obtained.

Self-Enhanced Chemiluminescence of Tris(bipyridine) Ruthenium(II) Derivative Nanohybrids: Mechanism Insight and Application for Sensitive Silver Ions Detection

In recent years, self-enhanced tris(bipyridine) ruthenium(II)-based luminescence systems have achieved great development in electrochemiluminescence (ECL) but are seldom mentioned in chemiluminescence (CL). Herein, a self-enhanced CL luminophore with excellent CL behavior was synthesized by covalently cross-linking tris(4,4'-dicarboxylic acid-2,2'-bipyridyl) ruthenium(II) dichloride ([Ru(dcbpy)₃]Cl₂) with branched polyethylenimine (BPEI) in one molecule (BPEI-Ru(II)), which then self-assembled into nanoparticles (BRuNPs). The nanoparticles exhibited stable and strong CL emission with potassium persulfate (K₂S₂O₈) as the oxidant. After the redox reaction between K₂S₂O₈ and BRuNPs, and the subsequent intramolecular electron-transfer reaction, excited state luminophores were generated to emit light. This self-enhanced CL system shortened the electron transfer distance and reduced energy loss, thus improving the luminous efficiency. In addition, the CL lifetime of BRuNPs/K₂S₂O₈ was longer than classical luminophores such as N-(4-aminobutyl)-N-ethylisoluminol (ABEI), indicating the potential application of this system in CL imaging. Surprisingly, Ag⁺ was found to greatly improve the CL efficiency of BRuNPs/K₂S₂O₈ by catalyzing the decomposition of K₂S₂O₈ to generate SO₄^•-. On the basis of the enhancement effect of Ag⁺, a simple and rapid CL method was proposed for Ag⁺ detection. The chemosensor showed a wide linear range from 25 to 3000 nM and low detection limit of 9.03 nM, as well as good stability and excellent selectivity. More importantly, this result indicated that Ag⁺ can be used as a coreaction accelerator to develop a ternary self-enhanced CL system, BRuNPs/K₂S₂O₈/Ag⁺.

Highly efficient electrochemiluminescence of ruthenium complex-functionalized CdS quantum dots and their analytical application

The electrochemiluminescence (ECL) method has attracted increasing attention in analytical fields. However, ECL luminophores with high ECL efficiency both at positive and negative potentials still remain rare. Herein, we synthesized ruthenium complex-functionalized CdS quantum dots (QDs) with high ECL efficiency both at positive and negative potentials in aqueous solution. CdS QDs were chosen as the ECL donor while bis(2,2'-bipyridine)-(5-aminophenanthroline)ruthenium bis(hexafluorophosphate) (Ru-NH2) was employed as the ECL acceptor. Ru-NH2 was covalently coupled to the surface of CdS QDs via diazonium salt chemistry to form CdS-Ru nanoparticles. ECL resonance energy transfer (ECL-RET) occurred inside the CdS-Ru nanoparticles and strong ECL emissions were obtained from CdS-Ru nanoparticles at both positive potential in the presence of tri-n-propylamine and at negative potential in the presence of peroxydisulfate. Further, the combination of the excellent recognition ability of the aptamer and the good ECL behavior of CdS-Ru nanoparticles, as a proof-of-concept, showed that two sensitive ECL methods for the detection of thrombin were readily achieved under different ECL measurement conditions with a low detection limit of 0.6 pM and 0.7 pM. This work demonstrates that CdS-Ru nanoparticles with intramolecular ECL-RET are good ECL luminophores in the sensitive detection of targets, which is promising in multiple assays with spectrum-resolved and potential-resolved possibility for biological applications.

Dual-Wavelength Electrochemiluminescence Ratiometric Biosensor for NF-κB p50 Detection with Dimethylthiodiaminoterephthalate Fluorophore and Self-Assembled DNA Tetrahedron Nanostructures Probe

In this work, we fabricated a dual-wavelength electrochemiluminescence ratiometric biosensor based on electrochemiluminescent resonance energy transfer (ECL-RET). In this biosensor, Au nanoparticle-loaded graphitic phase carbon nitride (Au-g-C₃N₄) as a donor and Au-modified dimethylthiodiaminoterephthalate (TAT) analogue (Au@TAT) as an acceptor were investigated for the first time. Besides, tetrahedron DNA probe was immobilized onto Au-g-C₃N₄ to improve the binding efficiency of the transcription factor and ECL ratiometric changes on the basis of the ratio of ECL intensities at 595 and 460 nm, which were obtained through the formation of a sandwich structure of DNA probe-antigen-antibody. Our biosensor achieved the assay of NF-κB p50 with a detection limit of 5.8 pM as well as high stability and specificity.

A perylenetetracarboxylic dianhydride and aniline-assembled supramolecular nanomaterial with multi-color electrochemiluminescence for a highly sensitive label-free immunoassay

A novel multi-color ECL nanomaterial assembled from 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) and aniline (An) was used for highly sensitive label-free CEA detection.

A versatile dendritical amplification photoelectric biosensing platform based on Bi2S3 nanorods and a perylene-based polymer for signal “on” and “off” double detection of DNA

A novel versatile dendritical amplification photoelectric biosensing platform using Bi₂S₃ nanorods and a perylene-based polymer as double signal probes is proposed for the detection of trace target DNA.

Perylene diimide as a cathodic electrochemiluminescence luminophore for immunoassays at low potentials

In the cathodic electrochemiluminescence (ECL) field, most reported luminophores produced ECL emission at high potentials (more than -1.3 V vs. Ag/AgCl), which was adverse for both fundamental studies and practical application. It was important to screen novel ECL luminophores and coreactants for the development of ECL. In this work, N,N'-dimethyl-3,4,9,10-perylenedicarboximide (PDI-CH₃) is reported to produce ECL at -0.47 V using K₂S₂O₈ as a coreactant in an aqueous system. In addition, the ECL wavelength was 689 nm, which was interpreted with the emission of excited PDI-CH₃ dimers. Finally, this low-triggering-potential ECL system was used to construct sandwiched immunosensors to detect carcinoembryonic antigen (CEA) with the potential range from 0 to -0.8 V. In this immunosensor, PDI-CH₃ and gold nanoparticles (AuNPs) reduced by citrate were grafted onto graphite oxide (GO) to label secondary antibodies (Ab₂). This immunosensor could sensitively detect CEA with the linear response range between 1 fg mL^-1 and 1 μg mL^-1 and detection limit 0.29 fg mL^-1. In addition, this immunosensor showed good feasibility in various cancer serum samples.

Electrochemical lead(II) biosensor by using an ion-dependent split DNAzyme and a template-free DNA extension reaction for signal amplification

A voltammetric biosensor for lead(II) (Pb²⁺) is described that is based on signal amplification by using an ion-dependent split DNAzyme and template-free DNA extension reaction. The Pb²⁺-dependent split DNAzyme was assembled on gold nanoparticles (Au@Fe₃O₄), and this nanoprobe then was exposed to Pb²⁺ which causes the split-off of DNAzymes to release primers containing 3'-OH groups (S₁ and S₂). The template-free DNA extension reaction triggers the generation of long ssDNA nanotails, which then can bind the free redox probe N,N'-bis(2-(trimethylammonium iodide)propylene)perylene-3,4,9,10-tetracarboxyldiimide (PDA⁺) via electrostatic adsorption. Hence, the concentration of PDA⁺ in solution is reduced. Therefore, less free PDA⁺ can be immobilized on a glassy carbon electrode modified with electrodeposited gold nanoparticles (depAu) to produce an electrochemical signal, typically measured at ∼0.38 V (vs. SCE) for quantitation of Pb²⁺. The use of a Pb²⁺-dependent split DNAzyme avoids the usage of a proteinic enzyme. It also increases the sensitivity of the sensor which has a lower detection limit of 30 pM of Pb²⁺. Graphical abstract Novel electrochemical biosensor based on the amplification of ion-dependent split DNAzyme and template-free DNA extension reaction for trace detection of Pb²⁺.

Recent advances in the development of electrochemical aptasensors for detection of heavy metals in food

Heavy metal contamination in environment and food has attracted intensive attention from the public since it poses serious threats to ecological system and human health. Traditional detection methods for heavy metals such as atomic absorption spectrometry have a fairly low detection limit, but the methods have many limitations and disadvantages. Therefore, it is of significance to develop a rapid technology for real-time and online detection of heavy metals. The electrochemical aptasensor-based technology is promising in the detection of heavy metals with advantages of high sensitivity, specificity, and accuracy. Although its development is rapid, more researches should be carried out before this technology can be used for on-site detection. In this review, the origin, basic principles and development of electrochemical aptasensors are introduced. The applications of nanomaterials and electrochemical aptasensors for the detection of heavy metals (mainly mercury, lead, cadmium, and arsenic) are summarized. The research and application tendency of electrochemical aptasensors for detection of heavy metals are prospected.

Design and Biosensing of a Ratiometric Electrochemiluminescence Resonance Energy Transfer Aptasensor between a g-C3N4 Nanosheet and Ru@MOF for Amyloid-β Protein

A dual-wavelength ratiometric electrochemiluminescence resonance energy transfer (ECL-RET) aptasensor based on the carbon nitride nanosheet (g-C₃N₄ NS) and metal-organic frameworks (Ru@MOFs) as energy donor-receptor pairs is first designed for the detection of the amyloid-β (Aβ) protein. The cathode ECL of g-C₃N₄ NS gradually decreased, whereas the anode ECL from Ru@MOF pyramidally enhanced along with the increasing concentration of Aβ in a 0.1 M phosphate-buffered saline solution containing 0.1 M S₂O₈^2-. Additionally, it is worth noting that 2-amino terephthalic acid from MOF not only can load abundant amounts of luminophor Ru(bpy)₃²⁺ but also promote the conversion of more amounts of S₂O₈^2- that served as a coreactant accelerator into SO₄^•-, further enhancing the ECL signal of Ru@MOF. Besides, the ECL intensity from the g-C₃N₄ NS had a tremendous spectrum overlap with the UV-vis spectrum of Ru@MOF, demonstrating the high-efficiency ECL-RET from g-C₃N₄ NS to Ru@MOF. According to the ratio of ECL_460nm/ECL_620nm, the constructed aptasensor for the detection of Aβ showed a wide linear range from 10^-5 to 500 ng/mL and a low detection limit of 3.9 fg/mL (S/N = 3) with a correction coefficient of 0.9965. The obtained results certified that the dual-wavelength ratiometric ECL sensor could provide a reliable direction and have the potential for application in biosensing and clinical diagnosis fields.

Perylene Diimide and Luminol as Potential-Resolved Electrochemiluminescence Nanoprobes for Dual Targets Immunoassay at Low Potential

In the field of clinical diagnosis, it is important to construct a potential-resolved multiplex electrochemiluminescence (ECL) biosensor for decreasing the false-positive rate and improving the diagnostic accuracy. However, the shortage of low-potential cathodic luminophores between -1 and 0 V (vs Ag/AgCl) severely limited the development of the biosensor. Herein, we synthesized a novel luminophore N,N-bis-(3-dimethyl aminopropyl)-3,4,9,10-perylene tetracarboxylic acid diimide (PDI), which gave dual emissions at -0.25/-0.26 V with K₂S₂O₈ as a co-reactant in aqueous solution. The ECL was assigned to excited J-type PDI dimers. Then, PDI and luminol were used as luminophores to respectively combine with graphite oxide and gold nanoparticles and form potential-resolved ECL nanoprobes. Also, this potential-resolved ECL nanoprobes were respectively functionalized by secondary antibodies (Ab₂) to construct a low-potential sandwiched ECL immunosensor for tumor markers carcinoembryonic antigen (CEA) and α-fetoprotein (AFP) simultaneous determination during linear scanning potential range from -0.6 to 0.6 V. The prepared multiplex immunosensor exhibited sensitive ECL response for CEA at -0.6 V due to PDI and that for AFP at 0.6 V due to luminol, and both linear semilogarithmical ranges were from 0.1 pg to 1 ng mL^-1. In addition, PDI with dual ECL peaks showed enticing prospect of built-in self-calibration for a precise quantitative and bioimaging analysis.

Dual resonance energy transfer in triple-component polymer dots to enhance electrochemiluminescence for highly sensitive bioanalysis

Polymer dots (Pdots) have become a type of attractive illuminant for electrochemiluminescence (ECL). However, the low ECL efficiency severely limits their practicability. Here, we design a dual intramolecular resonance energy transfer (RET) mechanism with newly synthesized triple-component Pdots to achieve great ECL enhancement. This mechanism efficiently shortens the path of energy transmission, thus greatly promoting the ECL amplification by 380 and 31 times compared to systems with no and single RET, and results in a relative ECL efficiency of 23.1% (vs. 1 mM Ru(bpy)32+). Using metal-organic frameworks to carry the triple-component Pdots, a highly luminescent probe is proposed. By integrating the probe with target-mediated enzymatic circulation amplification and DNA arrays, a highly sensitive ECL imaging method is designed for simultaneous visual analysis of two kinds of proteins, mucin 1 and human epidermal growth factor receptor 2, on living cells, which exhibited linear ranges of 1 pg mL-1 to 5 ng mL-1 and 5 pg mL-1 to 10 ng mL-1 with limits of detection of 1 pg mL-1 and 5 pg mL-1, respectively. The proposed strategy showed promising application in bioanalysis.

Ultrasensitive Immunosensor for Cardiac Troponin I Detection Based on the Electrochemiluminescence of 2D Ru-MOF Nanosheets

Electrochemiluminescence (ECL)-functionalized metal-organic frameworks (MOFs) have attracted increasing attention in biosensing in virtue of their diverse and tunable optical properties. A famous ECL luminophore, carboxyl-rich tris(4,4'-dicarboxylic acid-2,2'-bipyridyl) ruthenium(II) (Ru(dcbpy)₃²⁺), possesses the characteristics of good water solubility and excellent ECL performance and also has the potential to be the organic ligand of metal-organic frameworks. Herein, functionalized MOF nanosheets (RuMOFNSs) containing plenty of Ru(dcbpy)₃²⁺ in the frameworks were synthesized in aqueous solution by a simple one-pot method. In this protocol, Ru(dcbpy)₃²⁺ acted as organic ligand to coordinate with Zn²⁺ originated from Zn(NO₃)₂, and polyvinylpyrrolidone (PVP) was used as structure-directing agent to control the formation of sheetlike structure. For practical application, a "signal-on" ECL immunosensor was designed for cardiac troponin I (cTnI) detection by employing RuMOFNSs as ECL probe. The immunosensor exhibited high sensitivity and excellent selectivity for cTnI detection in the range from 1 fg/mL to 10 ng/mL with a detection limit as low as 0.48 fg/mL. Finally, the biosensor was successfully applied for the detection of cTnI in human serum sample with satisfactory results, demonstrating its potential application in bioanalysis and clinical diagnosis.