Detection of Oxygen Vacancies in Oxides by Defect-Dependent Cataluminescence

Heterothermic Cataluminescence Sensor System for Efficient Determination of Aldehyde Molecules

A simple and stable cataluminescence (CTL) sensing platform based on a single sensing material for effective and rapid detection of aldehydes is an urgent need due to growing concerns for the environment, security, and health. Here, an effective and user-friendly identification method is successfully proposed to determine six common aldehydes of homologous compounds via a heterothermic CTL sensor system. Using Gd2O3 with excellent catalytic activity as a sensing material, thermodynamic and kinetic insights into the interactions between Gd2O3 and aldehydes at different temperatures were extracted and integrated to generate a unique constellation profile for each tested aldehyde, whereby achieving their effective and prompt determination. Moreover, the sensor system allowed the quantitative analysis of aldehydes with detection limits of 0.001, 0.009, 0.011, 0.011, 0.007, and 0.003 μg mL-1. Significantly, the sensor system had an excellent stability of up to 30 days. The CTL sensing platform was constructed based on a thermal regulation strategy that can provide a new approach to chemical agent identification.

Tailored Metal-Organic Frameworks for Water Purification: Perfluorinated Fe-MOFs for Enhanced Heterogeneous Catalytic Ozonation

An industrially viable catalyst for heterogeneous catalytic ozonation (HCO) in water purification requires the characteristics of good dispersion of active species on its surface, efficient electron transfer for ozone decay, and maximum active species utilization. While metal-organic frameworks (MOFs) represent an attractive platform for HCO, the metal nodes in the unmodified MOFs exhibit low catalytic activity. Herein, we present a perfluorinated Fe-MOF catalyst by substituting H atoms on the metalated ligands with F atoms (termed 4F-MIL-88B) to induce structure evolution. The Lewis acidity of 4F-MIL-88B was enhanced via the formation of Fe nodes, tailoring the electron distribution on the catalyst surface. As a result of catalyst modification, the rate constant for degradation of the target compounds examined increased by ∼700% compared with that observed for the unmodified catalyst. Experimental evidence and theoretical calculations showed that the modulated polarity and the enhanced electron transfer between the catalyst and ozone molecules contributed to the adsorption and transformation of O3 to •OH on the catalyst surface. Overall, the results of this study highlight the significance of tailoring the metalated ligands to develop highly efficient and stable MOF catalysts for HCO and provide an in-depth mechanistic understanding of their structure-function evolution, which is expected to facilitate the applications of nanomaterial-based processes in water purification.

Probing Coordination Number of Single-Atom Catalysts by d-Band Center-Regulated Luminescence

It is essential to probe the coordination number (CN) because it is a crucial factor to ensure the catalytic capability of single-atom catalysts (SACs). Currently, synchrotron X-ray absorption spectroscopy (XAS) is widely used to measure the CN. However, the scarcity of synchrotron X-ray source and complicated data analysis restrict its wide applications in determining the CN of SACs. In this contribution, we have developed a d-band center-regulated acetone cataluminescence (CTL) probe for a rapid screening of the CN of Pt-SACs. It is disclosed that the CN-triggered CTL is attributed to the fact that the increased CN could induce the downward shift of d-band center position, which assists the acetone adsorption and promotes the subsequent catalytic reaction. In addition, the universality of the proposed acetone-CTL probe is verified by determining the CN of Fe-SACs. This work has opened a new avenue for exploring an alternative to synchrotron XAS for the determination of CN of SACs and even conventional metal catalysts through d-band center-regulated CTL.

Nonthermal Plasma Synthesis of Metallic Ti Nanocrystals

Nanoscale metallic titanium (Ti) offers unique energetic and biocompatible characteristics for the aerospace and biomedical industries. A rapid and sustainable method to form purified Ti nanocrystals is still in demand due to their high oxygen affinity. Herein, we report the production of highly purified Ti nanoparticles with a nonequilibrium face center cubic (FCC) structure from titanium tetrachloride (TiCl4) via a capacitively coupled plasma (CCP) route. Furthermore, we demonstrate a secondary H2 treatment plasma as an effective strategy to improve the air stability of a thin layer of nanoparticles by further removal of chlorine from the particle surface. Hexagonal and cubic-shaped Ti nanocrystals of high purity were maintained in the air after the secondary H2 plasma treatment. The FCC phase potentially originates from small-sized grains in the initial stage of nucleation inside the plasma environment, which is revealed by a size evolution study with variations of plasma power input.

Pt/Au Nanoparticles@Co3O4 Cataluminescence Sensor for Rapid Analysis of Methyl Sec-Butyl Ether Impurity in Methyl Tert-Butyl Ether Gasoline Additive

High purity methyl tert-butyl ether (MTBE) can be used to adjust gasoline octane values. However, an isomer, methyl sec-butyl ether (MSBE), is the main by-product of its industrial production, and this affects the purity of MTBE. Pt/Au NPs@Co3O4 composites with a hollow dodecahedron three-dimensional structure were synthesized using ZIF-67 as a template, with Pt and Au nanoparticles (NPs) evenly distributed on the shell of the hollow structure. A CTL sensor was established for the determination of MSBE based on the specificity of Pt/Au NPs@Co3O4. The experimental results showed that Pt/Au NPs@Co3O4 had a strong specific cataluminescence (CTL) response to MSBE, with no interference from MTBE. The linear range was 0.10–90 mg/L, the limit of detection was 0.031 mg/L (S/N = 3), the RSD was 2.5% (n = 9), and a complete sample test could be completed in five minutes. The sensor was used to detect MSBE in MTBE of different purity grades, with recoveries ranging from 92.0% to 109.2%, and the analytical results were consistent with those determined by gas chromatography. These results indicate that the established method was accurate and reliable, and could be used for rapid analysis of MTBE gasoline additive.

A fast response cataluminescence ether gas sensor based on GO/Mo2TiC2T x at low working temperature

A cataluminescence (CTL) ether gas sensor based on GO/Mo₂TiC₂T_x composite was developed. The sensor has high selectivity and sensitivity to ether with the response and recovery times of 2 and 8 s, respectively. The optimal operating temperature (155 °C) is low compare with common sensors. Under optimal conditions, the linear range of the concentrations of ether is 9.5–950 ppm; CTL signal intensity and ether concentration show a good linear relationship (r = 0.9952); and the detection limit is 0.64 ppm. Furthermore, no response to anything other than acetone after repeatedly tested 10 kinds of common volatile organic compounds, which shows that the sensor has a good selectivity. In addition, the developed sensor has a long life.

A cataluminescence (CTL) ether gas sensor based on a GO/Mo₂TiC₂T_x composite was developed. The sensor has high selectivity and sensitivity.

Evaluating the Band Gaps of Semiconductors by Cataluminescence

A rapid and efficient methodology for the evaluation of band gaps of semiconductors is highly desirable to analyze and assess the intrinsic properties and extending application scopes of semiconductor materials. Here, the negative correlation of the cataluminescence (CTL) signal in the presence of H₂S and the band gap of Aurivillius-type perovskite oxide Bi_4+nFe_nTi₃O_12+3n (n = 1-4) was confirmed, where the H₂S-induced CTL signal acts as a probe to evaluate the band gaps of semiconductor materials. The related mechanism shows that the thermal energy obtained by heating makes the electrons in the valence band more easily excite into the conduction band of a narrower band gap material and further promotes electron transfer between the gaseous compounds and semiconductor materials, causing acceleration of the catalytic oxide process. In addition, the extensibility was further verified by exploring the layered perovskite containing other insertion structures, including Bi_4+nCo_nTi₃O_12+3n (n = 1-4), Bi₅NiTi₃O₁₅, and Bi₅MnTi₃O₁₅, which was also consistent with the results characterized by UV diffuse reflectance spectroscopy. The established CTL probe for band gap evaluation shows rapid response, is simple to operate, and is of low cost, which is expected to become an innovative alternative to the conventional band gap assessment approach.

Online evaluation of the catalytic performance of MnO2 and its application in H2S cataluminescence sensing

As a catalyst widely used in industry, manganese dioxide (MnO₂) has different crystalline forms and shows excellent performance in catalytic reactions. Therefore, it is of significance to rapidly evaluate the catalytic performance of MnO₂ online. In this paper, a highly efficient evaluation method based on H₂S cataluminescence (CTL) sensing was proposed for MnO₂ with different crystalline forms. Firstly, α-, β- and δ-MnO₂ were synthesized successfully and performed diacritical CTL behaviours in the catalytic oxidation of H₂S. Based on these interesting phenomena, the catalytic performance of α-, β- and δ-MnO₂ was efficiently evaluated online through CTL method for the first time. Results showed that β-MnO₂ had the best catalytic oxidation performance, followed by α- and δ-MnO₂, and the reactive oxygen species of MnO₂ was the most significant influencing factor. Subsequently, β-MnO₂ was selected to design a CTL sensor for H₂S detection with a wide linear range (2.43-29.1 μg/mL) and a low limit of detection (LOD, S/N = 3, 0.280 μg/mL). This work not only provided a new and feasible method for online evaluation of the catalytic performance of materials, but also designed a CTL sensor for H₂S determination with high selectivity and sensitivity.

Novel Strategy for Engineering the Metal-Oxide@MOF Core@Shell Architecture and Its Applications in Cataluminescence Sensing

Cataluminescence is an attractive oxydic luminescence on the gas-solid interface, and metal-oxide@MOF core@shell architectures show great potential for cataluminescence sensing due to their integrated synergistic effect from core and shell components. However, restricting the direct nucleation and growth of metal-organic frameworks (MOFs) on the topologically distinct surface of metal oxides is a great challenge, owing to the high interface energy from the topology mismatch. Herein, for the first time, a novel liquid-phase concentration-controlled nucleation strategy is exploited to induce the direct assembly of a ZIF-8 layer on the surface of CeO₂ nanospheres without any sacrificial templates or further surface modifications. The results show that the construction of the CeO₂@ZIF-8 core@shell architecture can be accomplished within 1 min under the mediation of boosted nucleation kinetics. Furthermore, the universality of this developed strategy is demonstrated by the encapsulation of other metal-oxide cores such as magnetic Fe₃O₄ and ZnCo₂O₄ core particles with a ZIF-8 shell. Notably, compared to the pure CeO₂ and ZIF-8, the obtained CeO₂@ZIF-8 nanocomposite exhibits enhanced analytical performance for the cataluminescence sensing of propanal, in which the shell acts as the major catalytic reaction center, while the core contributes to further improving the catalytic efficiency. The proposed facile synthesis strategy with excellent simplicity, rapidity, and universality brings new insights into the engineering of core@shell advanced functional materials with mismatched topologies for catering to the diverse application demands.

A study on the cataluminescence of propylene oxide on FeNi layered double hydroxides/graphene oxide

In this work, FeNi layered double hydroxides/graphene oxide (FeNi LDH/GO) was prepared, which exhibits excellent selective cataluminescent performance towards propylene oxide.

Chemoselective hydrogenation of cinnamaldehyde over a tailored oxygen-vacancy-rich Pd@ZrO2 catalyst

Selective hydrogenation of cinnamaldehyde to hydrocinnamaldehyde is captivating due to its industrial relevance.

Rapid evaluation of oxygen vacancies-enhanced photogeneration of the superoxide radical in nano-TiO2 suspensions

Reactive oxygen species (ROS) play an important role in the photocatalytic degradation of pollutants and are closely related to the surface defects of a semiconductor.

Site-selective halogenation of mixed-valent vanadium oxide clusters

Here, we expand on the synthesis and characterization of chloride-functionalized polyoxovanadate-alkoxide (POV-alkoxide) clusters, to include the halogenation of mixed-valent vanadium oxide assemblies.

Cataluminescence Coupled with Photoassisted Technology: A Highly Efficient Metal-Free Gas Sensor for Carbon Monoxide

With the development of green chemistry, metal-free nanocatalysts have gradually substituted metal-based materials, causing widespread concern among researchers in many fields, especially in cataluminescence sensing, because of their long-term stability and environmental friendliness as well as low costs. Besides the catalysts, innovations of assistant technologies for cataluminescence are needed to enhance the oxidation reactivity of the gas molecules or catalytic efficiency of sensing materials. Although, there are some groups enhancing the cataluminescence reaction via various assistant technologies, the development of assistant technologies in cataluminescence sensors is still in its infancy; the design, effect mechanism, and application are still stimulating challenges. Herein, with photodynamic assistant, fluorinated nanoscale hexagonal boron nitride is first employed as a metal-free catalyst to establish a novel cataluminescence method for detecting CO gases, and the cataluminescence reaction mechanism of CO is also investigated in detail. Under the best conditions, the detection limit (3σ) of the CO concentration is 0.005 μg mL^-1, which has been largely improved in cataluminescence methods. The realization of detection of CO from theory to practice through the method of cataluminescence is beneficial for the practical application of metal-free catalysts to detect CO rather than staying at the possibility to detect CO by means of theoretical calculation only.

Enhancement of Photocatalytic Activity of Bi2 O3 -BiOI Composite Nanosheets through Vacancy Engineering

Vacancy engineering is an effective strategy to enhance solar-driven photocatalytic performance of semiconductors. It is highly desirable to improve the photocatalytic performance of composite nanomaterials by the introduction of vacancies, but the role of vacancies and the heterostructure in the photocatalytic process is elusive to the composite nanomaterials. Herein, the introduction of I vacancies can significantly enhance the photocatalytic activity of Bi₂ O₃ -BiOI composite nanosheets in a synergistic manner. The excellent photocatalytic performance of the Bi₂ O₃ -BiOI composites is attributed to the combination of Bi₂ O₃ and BiOI and the existence of I vacancies in Bi₂ O₃ -BiOI composites. Specifically, density functional theory calculation shows that the existence of I vacancies would create a new electric states vacancy band below the conduction band of BiOI and thus can reduce the bandgap of BiOI nanosheets. This greatly facilitates the scavenging of the photogenerated electron on the surface of BiOI by Bi₂ O₃ , therefore, enhancing the overall photocatalytic activity of the composites. The enhanced photocatalytic efficiency is demonstrated by the degradation of tetracycline (TC), which reaches 96% after 180 min and by the high total organic carbon (TOC) removal (89% after 10 h visible light irradiation). This study provides a novel approach for the design of high-performance composite catalysts.

The formation and detection techniques of oxygen vacancies in titanium oxide-based nanostructures

TiO2 and other titanium oxide-based nanomaterials have drawn immense attention from researchers in different scientific domains due to their fascinating multifunctional properties, relative abundance, environmental friendliness, and bio-compatibility. However, the physical and chemical properties of titanium oxide-based nanomaterials are found to be explicitly dependent on the presence of various crystal defects. Oxygen vacancies are the most common among them and have always been the subject of both theoretical and experimental research as they play a crucial role in tuning the inherent properties of titanium oxides. This review highlights different strategies for effectively introducing oxygen vacancies in titanium oxide-based nanomaterials, as well as a discussion on the positions of oxygen vacancies inside the TiO2 band gap based on theoretical calculations. Additionally, a detailed review of different experimental techniques that are extensively used for identifying oxygen vacancies in TiO2 nanostructures is also presented.

Ultrafast Electron Trapping and Defect-Mediated Recombination in NiO Probed by Femtosecond Extreme Ultraviolet Reflection-Absorption Spectroscopy

Understanding the chemical nature of defect sites as well as the mechanism of defect-mediated recombination is critical for the rational design of energy conversion materials with improved efficiency. Using femtosecond extreme ultraviolet (XUV) spectroscopy in conjunction with X-ray photoelectron spectroscopy (XPS), we present results on the ultrafast electron dynamics in NiO prepared with varying concentrations of defect states. We find that oxygen vacancy defects do not serve as the primary recombination center, but rather the recombination rate scales linearly with the density of Ni metal defects. This suggests that grain boundaries between Ni metal and NiO are responsible for fast carrier recombination in partially reduced NiO. Our kinetic model shows that the photoexcited electrons self-trap via small polaron formation on the subpicosecond time scale. Additionally, we estimate an absolute measurement of small polaron formation rates, direct versus defect-mediated recombination rates, and the small polaron diffusion coefficient in NiO. This study provides important parameters for engineering NiO based materials for solar energy harvesting applications.

A quantum-mechanical investigation of oxygen vacancies and copper doping in the orthorhombic CaSnO3 perovskite

In this study we explore the implications of oxygen vacancy formation and of copper doping in the orthorhombic CaSnO3 perovskite, by means of density functional theory, focusing on energetic and electronic properties. In particular, the electronic charge distribution is analyzed by Mulliken, Hirshfeld-I, Bader and Wannier approaches. Calculations are performed at the PBE and the PBE0 level (for doping with Cu, only PBE0), with both spin-restricted and spin-unrestricted formulations; unrestricted calculations are used for spin-polarized cases and for the naturally open-shell cases (Cu doping). An oxygen vacancy is found to have the tendency to reduce Sn neighbors by giving rise to an energy band within the energy band-gap of the pristine system, close to the valence band. At variance with what happens in the CaTiO3 perovskite (also investigated here), an oxygen vacancy in the CaSnO3 perovskite is found to lose two valence electrons and thus to be positively charged so that no F-center is formed. Regarding Cu doping, when one Sn atom is substituted by a Cu one, the most stable configuration corresponds to having the Cu atom as a first neighbor to the vacancy. These findings shed some light on the catalytic and phosphorous host properties of this perovskite.

Highly Selective Electrochemical Reduction of Dinitrogen to Ammonia at Ambient Temperature and Pressure over Iron Oxide Catalysts

The catalytic conversion of dinitrogen (N₂ ) into ammonia under ambient conditions represents one of the Holy Grails in sustainable chemistry. As a potential alternative to the Haber-Bosch process, the electrochemical reduction of N₂ to NH₃ is attractive owing to its renewability and flexibility, as well as its sustainability for producing and storing value-added chemicals from the abundant feedstock of water and nitrogen on earth. However, owing to the kinetically complex and energetically challenging N₂ reduction reaction (NRR) process, NRR electrocatalysts with high catalytic activity and high selectivity are rare. In this contribution, as a proof-of-concept, we demonstrate that both the NH₃ yield and faradaic efficiency (FE) under ambient conditions can be improved by modification of the hematite nanostructure surface. Introducing more oxygen vacancies to the hematite surface renders an improved performance in NRR, which leads to an average NH₃ production rate of 0.46 μg h^-1  cm^-2 and an NH₃ FE of 6.04 % at -0.9 V vs. Ag/AgCl in 0.10 m KOH electrolyte. The durability of the electrochemical system was also investigated. A surprisingly high average NH₃ production rate of 1.45 μg h^-1  cm^-2 and a NH₃ FE of 8.28 % were achieved after the first 1 h chronoamperometry test. This is among the highest FEs reported so far for non-precious-metal catalysts that use a polymer-electrolyte-membrane cell and is much higher than the FE of precious-metal catalysts (e.g., Ru/C) under comparable reaction conditions. However, the NH₃ yield and the FE dropped to 0.29 μg h^-1  cm^-2 and 2.74 %, respectively, after 16 h of chronoamperometry tests, which indicates poor durability of the system. Our results demonstrate the important role that the surface states of transition-metal oxides have in promoting electrocatalytic NRR under ambient conditions. This work may spur interest towards the rational design of electrocatalysts as well as electrochemical systems for NRR, with emphasis on the issue of stability.

UV-Assisted Cataluminescent Sensor for Carbon Monoxide Based on Oxygen-Functionalized g-C3N4 Nanomaterials

Cataluminescence (CTL) is one of the most important sensing-transduction principles for the real-time monitoring of atmospheric pollutants. Highly sensitive CTL-based CO detection still remains a challenge because of the relatively poor reactivity of CO and the low catalytic efficiency of the catalysts. Herein, combining ultraviolet (UV)-light activation and chemical modification of the sensing element, we have successfully established a UV-assisted CTL sensor for gaseous CO based on g-C₃N₄ with high sensitivity, selectivity, and stability. UV irradiation can efficiently activate CO molecules and induce the generation of reactive oxygen species (ROS) for CO oxidation. Furthermore, carboxyl groups greatly facilitate the chemisorption of CO on functionalized g-C₃N₄ nanomaterials, thus enhancing the CTL sensitivity. The influences of experimental conditions and the possible catalytic mechanism of CO on functionalized g-C₃N₄ have been investigated in detail. Under the optimal experimental conditions, the proposed CTL sensor presents a detection limit (3σ) toward CO of 0.008 μg mL^-1, which is much lower than the maximum allowable emission concentration of CO in atmospheric conditions (0.030 μg mL^-1). The UV-CTL system is green, sensitive, stable, and low cost, and thus it possesses great potential application in gas sensing.

Cataluminescence sensing of carbon disulfide based on CeO2 hierarchical hollow microspheres

Material morphology-dependent cataluminescence (CTL) sensing characteristic and application are presented in this work. Hierarchical hollow microspheres CeO₂ were synthesized via the hydrothermal reaction of glucose and N, N-dimethyl-formamide (Glu-DMF). SEM, XRD, TEM, HRTEM and BET were used to characterize the prepared CeO₂ materials. Compared with CeO₂ cubics (CeO₂ Cubs), CeO₂ hierarchical hollow microspheres (CeO₂ HMs) show an enhanced CTL response to carbon disulfide. The response and recovery times of CeO₂ HMs-based CTL sensor towards carbon disulfide are about 8 s and 20 s, respectively. CeO₂ HMs exhibits a linear CTL response to carbon disulfide in the concentration range of 0.50~10 μg•mL^-1 with an excellent sensitivity and selectivity. These results suggest that CeO₂ HMs will be a highly promising CTL sensing material for the detection and monitoring carbon disulfide. Graphical abstract CeO₂ hierarchical hollow microspheres (CeO₂ HMs) were synthesized via the hydrothermal reaction of glucose and N, N-dimethyl-formamide (Glu-DMF). Meanwhile, the prepared CeO₂ HMs shows commendable CTL response towards carbon disulfide. Due to the excellent analytical performance of designed CeO₂ HMs-based sensor for carbon disulfide, it has potential application value in various locations.

Effect of Mixed Valence States of Platinum Ion Dopants on the Photocatalytic Activity of Titanium Dioxide under Visible Light Irradiation

Titanium dioxide doped with the Pt ion (Pt-TiO₂) was synthesized by a sol-gel method using only water as the solvent and conducting dialysis. The photocatalytic activity for the degradation of 4-chlorophenol (4-CP) on Pt-TiO₂ was not affected by the Brunauer-Emmett-Teller specific surface area under visible light (VL) irradiation. X-ray photoelectron spectroscopy (XPS) and X-ray absorption near-edge structure measurements revealed that only the Pt(IV) ion existed in the TiO₂ bulk and both Pt(II) and Pt(IV) were present near the Pt-TiO₂ surface. Pt(IV) is most likely substituted in the Ti(IV) site of the TiO₂ lattice because of their similar ionic sizes. Quantitative analysis of Pt(II) was performed in the XPS measurements, indicating that the amount of Pt(II) on the surface increased with an increase in the doping amount from 0.2 to 1.0 atom %. We synthesized 0.5 atom % Pt-TiO₂ with various Pt(II)/Pt(IV) ratios by changing the Ti(OC₃H₇)₄ concentration used in the sol-gel synthesis. The 4-CP conversion on Pt-TiO₂ increased linearly with an increase in the Pt(II)/Pt(IV) ratios. A similar relationship was obtained with Pt-TiO₂, which was prepared by a conventional sol-gel method in ethanol-water mixed solvent. Therefore, the Pt(II)/Pt(IV) ratio is a key factor affecting the photocatalytic activity of Pt-TiO₂ under VL irradiation. Our results indicate that controlling the mixed valence states of the doped metal ions is a new strategy to developing highly active metal-ion-doped TiO₂ under VL irradiation.

Oxygen Vacancy Promoted Heterogeneous Fenton-like Degradation of Ofloxacin at pH 3.2-9.0 by Cu Substituted Magnetic Fe3O4@FeOOH Nanocomposite

To develop an ultraefficient and reusable heterogeneous Fenton-like catalyst at a wide working pH range is a great challenge for its application in practical water treatment. We report an oxygen vacancy promoted heterogeneous Fenton-like reaction mechanism and an unprecedented ofloxacin (OFX) degradation efficiency of Cu doped Fe₃O₄@FeOOH magnetic nanocomposite. Without the aid of external energy, OFX was always completely removed within 30 min at pH 3.2-9.0. Compared with Fe₃O₄@FeOOH, the pseudo-first-order reaction constant was enhanced by 10 times due to Cu substitution (9.04/h vs 0.94/h). Based on the X-ray photoelectron spectroscopy (XPS), Raman analysis, and the investigation of H₂O₂ decomposition, ^•OH generation, pH effect on OFX removal and H₂O₂ utilization efficiency, the new formed oxygen vacancy from in situ Fe substitution by Cu rather than promoted Fe³⁺/Fe²⁺ cycle was responsible for the ultraefficiency of Cu doped Fe₃O₄@FeOOH at neutral and even alkaline pHs. Moreover, the catalyst had an excellent long-term stability and could be easily recovered by magnetic separation, which would not cause secondary pollution to treated water.

Oxygen Vacancy Associated Surface Fenton Chemistry: Surface Structure Dependent Hydroxyl Radicals Generation and Substrate Dependent Reactivity

Understanding the chemistry of hydrogen peroxide (H₂O₂) decomposition and hydroxyl radical (•OH) transformation on the surface molecular level is a great challenge for the application of heterogeneous Fenton system in the fields of chemistry, environmental, and life science. We report in this study a conceptual oxygen vacancy associated surface Fenton system without any metal ions leaching, exhibiting unprecedented surface chemistry based on the oxygen vacancy of electron-donor nature for heterolytic H₂O₂ dissociation. By controlling the delicate surface structure of catalyst, this novel Fenton system allows the facile tuning of •OH existing form for targeted catalytic reactions with controlled reactivity and selectivity. On the model catalyst of BiOCl, the generated •OH tend to diffuse away from the (001) surface for the selective oxidation of dissolved pollutants in solution, but prefer to stay on the (010) surface, reacting with strongly adsorbed pollutants with high priority. These findings will extend the scope of Fenton catalysts via surface engineering and consolidate the fundamental theories of Fenton reactions for wide environmental applications.

Recent advances in cataluminescence-based optical sensing systems

Recent advances in the development of cataluminescence focused on oxygen, temperature, catalyst and instrumentation are summarized.

A cataluminescence sensor with fast response to diethyl ether based on layered double oxide nanoparticles

This work proposed a cataluminescence (CTL) sensor for rapid and highly selective detection of diethyl ether using Mg-Al-layered double oxide (Mg-Al LDO). The linear range of the CTL intensity versus the concentration of diethyl ether was 0.1-8.0 mM, with a correlation coefficient (R) of 0.9915. The limit of detection (signal-to-noise ratio (S/N) = 3) was 0.02 mM. The half decay time was ~15 s, indicating a fast CTL process. The CTL sensor showed an excellent selectivity toward diethyl ether and good operational stability. Relative standard deviation (RSD) was less than 3 % in 20 consecutive measurements for diethyl ether. The CTL process was monitored by gas chromatography-mass spectrometry (GC/MS), pH indicator, and CTL spectrum. The results showed that the strong CTL signals were from the specific basic sites of Mg-Al LDO nanoparticle, which was further confirmed by temperature-programmed desorption of carbon dioxide (CO₂-TPD). This work not only provides a facile approach to obtain a CTL sensor based on LDO but also systematically investigates the catalytic mechanism of LDO. Graphical abstract ᅟ.