Gold Nanorods as Colorful Chromogenic Substrates for Semiquantitative Detection of Nucleic Acids, Proteins, and Small Molecules with the Naked Eye

Highly selective localized surface plasmon resonance sensor for selenium diagnosis in selenium-rich soybeans

It is a challenge to determine selenium in acid aqueous for environmental monitoring and selenium-rich agricultural diagnosis. Herein, we developed a novel localized surface plasmon resonance (LSPR) sensor to detect Se(IV) ions based on the extraordinary laterals etching of gold nanorods (AuNRs). The etching started from the laterals in the low amount of Se(IV) ions, and accompanied by an apparent red shift of the longitudinal plasmon band (LPB), and then transformed to the tips etching with the upward of Se(IV) ions, the LPB band immediately shifted to the shorter wavelength. The red shift change (Δλ) of LPB band was utilized to quantitative analysis instead of blue shift or absorbance intensity, which gave a high selectivity for the proposed sensor. More importantly, this sensor could be performed in 0.1 mol/L of HCl solution, which achieved the seamlessly jointing with the pretreatment of complex samples, without time-consuming pH adjustment.Successful selenium detection was demonstrated in complex soybean samples that collected from the maturity after spraying organic chelated selenium at full flower period. The sensor provided a promising way to monitor and diagnose selenium in complex environmental samples and selenium-rich crops.

Bimetallic FeCo-MOFs mediated Au nanorods etching for the multi-colorimetric and photothermal immunosensing of illegal additive

With the rapid expansion of the health food industry, the scope of safety supervision has also increased. However, traditional instrument detection methods cannot meet the requirements for the rapid on-site detection. Hence, the development of a rapid, precise, and simple method for the analysis of illegal additives in health foods is of great importance. In this work, by using FeCo-MOFs as mimetic peroxidase to mediate Au nanorods (Au NRs) etching, a dual-mode immunosensor based on multi-colorimetric and photothermal signals was fabricated to detect furosemide (FUR). In multi-colorimetric channel, the localized surface plasmon resonance (LSPR) peaks of Au NRs shifted blue, resulting in multi-color changes from red to gray to blue and finally to purple. In photothermal channel, the photothermal effect of Au NRs decreased, resulting in temperature changes. In the range of 1.0 × 10-5-1.0 × 10-2 μg/mL, both LSPR peak blue shift and temperature changes were linearly correlated with the logarithm of FUR concentration, with the detection limits were 4.9 × 10-6 and 8.5 × 10-6 μg/mL, respectively. Furthermore, its concentration can be accurately and intuitively assessed through the observation of vivid colorimetric changes. This advancement offers a highly promising approach for the on-site detection of FUR, facilitating timely and efficient monitoring, thereby significantly enhancing regulatory compliance and ensuring consumer safety.

Hollow-like three-dimensional structure of methyl orange-delaminated Ti3C2 MXene nanocomposite for high-performance electrochemical sensing of tryptophan

Tryptophan(Trp) is being explored as a potential biomarker for various diseases associated with decreased tryptophan levels; however, metabolomic methods are expensive and time-consuming and require extensive sample analysis, making them urgently needed for trace detection. To exploit the properties of Ti3C2 MXenes a rational porous methyl orange (MO)-delaminated Ti3C2 MXene was prepared via a facile mixing process for the electrocatalytic oxidation of Trp. The hollow-like 3D structure with a more open structure and the synergistic effect of MO and conductive Ti3C2 MXene enhanced its electrochemical catalytic capability toward Trp biosensing. More importantly, MO can stabilize Ti3C2 MXene nanosheets through noncovalent π-π interactions and hydrogen bonding. Compared with covalent attachment, these non-covalent interactions preserve the electronic conductivity of the Ti3C2 MXene nanosheets. Finally, the addition of MO-derived nitrogen (N) and sulfur (S) atoms to Ti3C2 MXene enhanced the electronegativity and improved its affinity for specific molecules, resulting in high-performance electrocatalytic activity. The proposed biosensor exhibited a wide linear response in concentration ranges of 0.01-0.3 µM and 0.5-120 µM, with a low detection limit of 15 nM for tryptophan detection, and high anti-interference ability in complex media of human urine and egg white matrices. The exceptional abilities of the MO/Ti3C2 nanocatalyst make it a promising electrode material for the detection of important biomolecules.

Profuse color-evolution based aptasensor for mucin 1 detection utilizing urease-mediated color mixing of the mixed pH indicator

Mucin 1 is a significant tumor marker, and developing portable and cost-effective methods for its detection is crucial, especially in resource-limited areas. Herein, we developed an innovative approach for mucin 1 detection using a visible multicolor aptasensor. Urease-encapsulated DNA microspheres were used to mediate multicolor change facilitated by the color mixing of the mixed pH indicator, a mixed methyl red and bromocresol green solution. Distinct color changes were exhibited in response to varying mucin 1 concentrations. Notably, the color mixing of the mixed pH indicator was used to display various hues of colors, broadening the range of color variation. And color tonality is much easier to differentiate than color intensity, improving the resolution with naked-eyes. Besides, the variation of color from red to green (a pair of complementary colors) enhanced the color contrast, heightening sensitivity for visual detection. Importantly, the proposed method was successfully applied to detect mucin 1 in real samples, demonstrating a clear differentiation of colors between the samples of healthy individuals and breast cancer patients. The use of a mixed pH indicator as a multichromatic substrate offers the merits of low cost, fast response to pH variation, and plentiful color-evolution. And the incorporation of calcium carbonate microspheres to encapsulate urease ensures stable urease activity and avoids the need for extra urease decoration. The color-mixing dependent strategy opens a new way for multicolor detection of MUC1, characterized by vivid color changes.

Multicolor-Assay-on-a-Chip Processed by Robotic Operation (MACpro) with Improved Diagnostic Accuracy for Field-Deployable Detection

The ability to deploy decentralized laboratories with autonomous and reliable disease diagnosis holds the potential to deliver accessible healthcare services for public safety. While microfluidic technologies provide precise manipulation of small fluid volumes with improved assay performance, their limited automation and versatility confine them to laboratories. Herein, we report the utility of multicolor assay-on-a-chip processed by robotic operation (MACpro), to address this unmet need. The MACpro platform comprises a robot-microfluidic interface and an eye-in-hand module that provides flexible yet stable actions to execute tasks in a programmable manner, such as the precise manipulation of the microfluidic chip along with different paths. Notably, MACpro shows improved detection performance by integrating the microbead-based antibody immobilization with enhanced target recognition and multicolor sensing via Cu2+-catalyzed plasmonic etching of gold nanorods for rapid and sensitive analyte quantification. Using interferon-gamma as an example, we demonstrate that MACpro completes a sample-to-answer immunoassay within 30 min and achieves a 10-fold broader dynamic range and a 10-fold lower detection limit compared to standard enzyme-linked immunosorbent assays (0.66 vs 5.2 pg/mL). MACpro extends the applications beyond traditional laboratories and presents an automated solution to expand diagnostic capacity in diverse settings.

Hybridization chain reaction assisted multicolor immunosensor for sensitively detection of human chorionic gonadotropin

The level of human chorionic gonadotropin (HCG) is an important indicator for early pregnancy, pregnancy-related diseases trophoblastic diseases and even cancer diagnosis. Therefore, sensitive detection of HCG has crucial significance in clinical, especially in gynaecology and obstetrics. Herein, a hybridization chain reaction (HCR) assisted multicolor immunosensor have been developed for HCG analysis. The proposed method introduced HCR after the immunoreaction between antibody and HCG protein, and produced long double strand DNA (dsDNA) that contain biotin sites. The streptavidin-horseradish peroxidase was linked on the dsDNA by the interaction between biotin and streptavidin, and can further mediated gold nanobipyramids (Au NBPs) etching. The localized surface plasmon resonance absorption peaks of Au NBPs blue shift and accompanied a vivid color change after etching effect. Based on this color change, HCG could be qualitative and semi-quantitative detected. Because of the introduction of HCR and enzyme amplification technique, the proposed method exhibited high sensitivity with a linear range of 0.1-2000 pg/mL and limit of detection (LOD) of 0.1 pg/mL. Finally, the proposed immunosensor was used to detect clinical serum samples. The results show there are no significant differences between clinical results and the test results by this method, indicating the practicability of the proposed method.

Nanoplasmonic biosensors for multicolor visual analysis of acetylcholinesterase activity and drug inhibitor screening in point-of-care testing

The monitoring of acetylcholinesterase (AChE) activity and the screening of its inhibitors are significance of the diagnosis and drug therapy of nervous diseases. A metal ions-mediated signal amplification strategy was developed for the highly sensitive and multicolor assay of AChE activity and visually screening its drug inhibitors. After the specific reaction between AChE and acetylthiocholine (ATCh), the hydrolysis product thiocholine (TCh) can directly and decompose the α-FeOOH nanorods (NRs) to release amounts of Fe2+, which was regarded as Fenton reagent to efficiently catalyze H2O2 to produce ·OH. Then, the as-formed ·OH can further largely shorten the gold nanobipyramids (Au NBPs), generating a series of palpable color variations. The linear range for AChE activity was 0.01-500.0 U/L with the limit of detection as low as 0.0074 U/L. The vivid visual effects could be easily distinguished for the multicolor assay of AChE activity by naked eye in visible light. To achieve the point-of-care testing, Au NBPs were further assembled on polymeric electrospun nanofibrous films (ENFs) surface as test strips for the easy-to-use test of AChE activity by RGB values with a smartphone. Fascinatingly, this proposed strategy can be used for the visual screening AChE inhibitors or non-inhibitors. Comparing with the clinical drugs (rivastigmine tartrate, and donepezil), some natural alkaloids such as evodiamine, caffeine, camptothecin, and berberine hydrochloride were selected as inhibitor modes to confirm the drug screening capability of this method. This proposed strategy may have great potential in the other disease-related enzymatic biomarkers assay and the rapid screening of drug therapy.

Simple dual-readout immunosensor based on phosphate-triggered and potassium permanganate for visual detection of fenitrothion

Multicolor-based visual immunosensor is a promising tool for rapid analysis without the use of bulky instruments. Herein, an anti-fenitrothion nanobody-alkaline phosphatase fusion protein (VHHjd8-ALP) was employed to develop a multicolor visual immunosensor (MVIS) and a ratiometric fluorescence MVIS (RFMVIS, respectively). After one-step competitive immunoassay, the VHHjd8-ALP bound to microplate catalyzed phenyl phosphate disodium salt (ArP) into phenol. Under high alkaline condition (pH 12), the phenol reduced KMnO4 to intermediate (K2MnO4) and further to MnO2 in alkaline condition (pH 12), accompanied by a visible color transition of purple-green-yellow, which can be used for semiquantitative visual analysis or qualitative detection by measuring RGB value. RFMVIS was proposed on the basis of MVIS to further improve sensitivity. The CdTe quantum dot and fluorescein were used as signal probes to develop the fluorescent immunosensor. The CdTe dots with red emission (644 nm) was quenched by oxidation of KMnO4, whereas the fluorescein with green emission (520 nm) remained constant, accompanied by a fluorescent color transition of green-yellow-red. By measuring the ratio of the fluorescence intensity (I644/I520), the ratiometric fluorescence immunosensor was developed for qualitative analysis. The two visual immunosensors were sensitive and simple, and they showed good accuracy and practicability in the recovery test, thus are ideal tools for rapid screening.

A portable intelligent hydrogel platform for multicolor visual detection of HAase

Hyaluronidase (HAase) is an important endoglycosidase involved in numerous physiological and pathological processes, such as apoptosis, senescence, and cancer progression. Simple, convenient, and sensitive detection of HAase is important for clinical diagnosis. Herein, an easy-to-operate multicolor visual sensing strategy was developed for HAase determination. The proposed sensor was composed of an enzyme-responsive hydrogel and a nanochromogenic system (gold nanobipyramids (AuNBPs)). The enzyme-responsive hydrogel, formed by polyethyleneimine-hyaluronic acid (PEI-HA), was specifically hydrolyzed with HAase, leading to the release of platinum nanoparticles (PtNPs). Subsequently, PtNPs catalyzed the mixed system of 3,3',5,5'-tetramethylbenzidine (TMB) and H2O2 to produce TMB2+ under acidic conditions. Then, TMB2+ effectively etched the AuNBPs and resulted in morphological changes in the AuNBPs, accompanied by a blueshift in the localized surface plasmon resonance peak and vibrant colors. Therefore, HAase can be semiquantitatively determined by directly observing the color change of AuNBPs with the naked eye. On the basis of this, the method has a linear detection range of HAase concentrations between 0.6 and 40 U/mL, with a detection limit of 0.3 U/mL. In addition, our designed multicolor biosensor successfully detected the concentration of HAase in human serum samples. The results showed no obvious difference between this method and enzyme-linked immunosorbent assay, indicating the good accuracy and usability of the suggested method.

TMB+-mediated etching of urchin-like gold nanostructures for colorimetric sensing

The morphology-dependent localized surface plasmon resonance of gold nanostructures has been widely utilized for designing sensors. One method relies on the color change of gold nanoparticles upon etching. In previous work, TMB2+oxidized from 3,3',5,5'-tetramethylbenzidine (TMB) was found to etch gold nanorods (AuNRs), leading to a spectrum of different colors. However, the preparation of TMB2+needs the addition of a strong acid and other harsh conditions. Herein, a new colorimetric biosensing platform was developed using urchin-like gold nanoparticles (AuNUs). Compared with AuNRs, the etching of AuNUs can happen under mild conditions by TMB+at pH 6, protecting enzymes and proteins from denaturation. The role of CTAB surfactant was dissected, and its bromide ions were found to be involved in the etching process. Based on these observations, a one-step colorimetric detection of H2O2was realized by using horseradish peroxidase and H2O2to oxidize TMB. Within 30 min, this system achieved a detection limit of 80 nM H2O2. This work offered fundamental insights into the etching of anisotropic gold nanostructures and optimized the etching conditions. These advancements hold promise for broader applications in biosensing and analytical chemistry.

Rapid and sensitive determination of ascorbic acid based on label-free silver triangular nanoplates

In this study, a new method for the detection of ascorbic acid (AA) was proposed. It was based on the protective effect of AA on silver triangular nanoplates (Ag TNPs) against Cl- induced etching reactions. Cl- can attack the corners of Ag TNPs and etch them, causing a morphological shift from triangular nanoplates to nanodiscs. As a result, the solution changes color from blue to yellow. However, in the presence of AA, the corners of Ag TNPs can be protected from Cl- etching, and the blue color of the solution remains unchanged. Using this effect, a selective sensor was designed to detect AA in the range of 0-40.00 μM with a detection limit of 2.17 μM. As the concentration of AA varies in this range, color changes from yellow to blue can be easily observed, so the designed sensor can be used for colorimetric detection. This method can be used to analyze fruit juice samples.

A label-free multicolor colorimetric and fluorescence dual mode biosensing of HIV-1 DNA based on the bifunctional NiFe2O4@UiO-66 nanozyme

Finding the DNA of the human immune deficiency virus (HIV) with simple and sensitive detection is the main challenge in early diagnosis of AIDS. Herein, two-point separation strategies based on the colorimetric and fluorescence are introduced. The naked-eye qualitative and semiquantitative colorimetric, and also accuracy fluorescence quantification of HIV-1 DNA were applied using label-free NiFe₂O₄@UiO-66 nanozyme with both functions of peroxidase-mimetic like and emitting fluorescence. The DNA probe-conjugated nanozyme is employed to hybridize a sequence of HIV-1. NiFe₂O₄@UiO-66 nanozymes catalyze the decomposition of H₂O₂ to ^•OH which can produce a remarkable fluorescent product 2-hydroxyterephthalic acid (TAOH) by the oxidation of the bridging ligand of weakly fluorescent terephthalic acid (TA). The accessibility of H₂O₂ toward confined-NiFe₂O₄ MNPs was reduced by increasing the HIV-1 target DNA concentration, resulting in the fluorescence intensity of TAOH being decreased. Meanwhile, remaining the unreacted H₂O₂ was transferred an acidic colorimetric solution containing FeSO₄ and gold nanorods (AuNRs). Increasing the amount of H₂O₂ available for longitudinal etching of AuNRs due to •OH-generating Fe⁺²-catalyzed H₂O₂ is reponsible for different colors from brownish to colorless depending on the HIV-1 target DNA concentration. The fluorescence intensity and obtained colors have offered the sensitive biosensing methods with a linear range from 0.05 to 300 and 1-200 pM, respectively with a detection limit as low as 1 fM. Our study revealed that the applied sensing assay provides a cost-effective and straightforward qualitative, semiquantitative, and sensitive quantitation visible monitoring without the necessity of high-end instruments for HIV-1 detection in a human blood plasma/serum samples.

Shape dependency of gold nanorods through TMB2+-mediated etching for the visual detection of NT-proBNP

Heart failure (HF) is a major public health problem triggered by heart circulation disorders. Early detection and diagnosis are conducive to the prevention and treatment of HF. Hence, it is necessary to establish a simple and sensitive method to monitor the diagnostic biomarkers of HF. The N-terminal B-type natriuretic peptide precursor (NT-proBNP) is acknowledged as a sensitive biomarker. In this study, a visual detection method for NT-proBNP was developed based on the oxidized 3,3',5,5'-tetramethylbenzidine (TMB2+)-mediated etching of gold nanorods (AuNRs) and double-antibody-sandwich ELISA. The etching color for different amounts of NT-proBNP was obvious and significant differences could be ascertained based on the blue-shift of the longitudinal localized surface plasmon resonance (LLSPR) of the AuNRs. The results could be observed by the naked eye. The constructed system showed a concentration range from 6 to 100 ng mL-1 and a low detection limit of 6 ng mL-1. This method exhibited negligible cross-reactivity toward other proteins, and the recoveries of the samples ranged from 79.99% to 88.99%. These results demonstrated that the established method is suitable for the simple and convenient detection of NT-proBNP.

Multicolor colorimetric assay for copper ion detection based on the etching of gold nanorods

An effective, selective, and multicolor colorimetric assay for Cu²⁺ detection based on the regulation of peroxidase-like nanozyme-mediated etching of gold nanorods (Au NRs) is proposed. Cu²⁺-creatinine complex is selected as the nanozyme that exhibits excellent peroxidase-like activity even in the case of low concentration of Cu²⁺, which can catalyze 3,3,5,5-tetramethylbenzidine (TMB) to produce oxidized TMB (TMB⁺) in the presence of hydrogen peroxide, and TMB⁺ is oxidized to generate TMB²⁺ after adding H⁺, and the TMB²⁺ can etch Au NRs. The determination of Cu²⁺ is achieved based on the blue shift of the longitudinal localized surface plasmon resonance peak of Au NRs. Under the optimal conditions, the developed colorimetric assay exhibits high sensitivity for the detection of Cu²⁺ (limit of detection is 0.034 μM) with a wide linear range of 0.05-4.0 μM (R² = 0.987). The solution shows a rainbow-like color in response to the increase of Cu²⁺ concentration, which can realize the semi-quantitative detection of Cu²⁺ by naked eyes. In addition, the developed method exhibits excellent selectivity for Cu²⁺-detection. The established method was used for the determination of Cu²⁺ in lake water, soil, and normal human serum with satisfactory recovery of spiked samples.

Enzyme-assisted metal nanoparticles etching based plasmonic ELISA: Progress and insights

The unique size and shape tunable localized surface plasmon resonance (LSPR) properties of the noble metal nanoparticle have been extensively exploited to realize a variety of enzyme-based optical biosensors. Although approaches like metal film deposition, nanoparticle aggregation, and synthesis & growth of metal nanoparticles are quite useful, metal nanoparticle etching-based biosensors offer greater sensitivity, selectivity, and stability against various environmental factors which makes this strategy easy to use for field applications. This review discusses the current state-of-art of plasmonic nanoparticle etching-based enzyme-linked immunosorbent assay (ELISA) realized for visual detection of various analytes. The naked eye detection, i.e. without any optical readout device, is the additional advantage of this sensing approach that reduces the analysis cost significantly making it feasible under resource-constrained settings. This review paper provides deeper insights into biocatalytic etching mechanisms of various plasmonic nanoparticles resulting in vivid color change as a function of analyte concentration. Although nanoparticle etching-based ELISA has huge potential, steps need to be taken to realize a point-of-care (POC) nanodiagnostic before its translation to a commercial technique or product that can be achieved in near future by integrating it with microfluidics technology and other technological avenues.

Dual-aptamer-based enzyme linked plasmonic assay for pathogenic bacteria detection

Development of rapid, sensitive, and selective method for pathogenic bacteria detection is of great importance for food safety, medical diagnostic, and environmental monitoring. Currently, most techniques for low numbers of bacteria detection require advanced instrumentation or skilled operators. Herein, we present a facile colorimetric detection platform for bacterial detection using Ag nanoplates as chromogenic substrate, which takes advantages of the high specificity and affinity of aptamer and the ability of catalase to hydrolyze H₂O₂ that can etch Ag nanoplates. By introducing catalase to the sandwich structure composed by dual-aptamer recognition strategy, bacteria detection signal is converted to the peak shift of LSPR and colorimetric change. This proposed method allows a fast naked-eye detection of S. aureus at the concentration of 60 CFU/mL based on the combination of streptavidin-biotin system and inherent sensitivity of plasmonic Ag nanoplates. Owing to the high selectivity and sensitivity, as well as the low-cost and good adaptability, this plasmonic assay is expected to be suitable for pathogenic bacteria detection in resource-limited settings.

CunO/Au heterostructure dendrimer anchored on Cu foam as dual functional catalytic nanozyme for glucose sensing by enzyme mimic cascade reaction

Multifunctional catalytic performance plays a crucial role in bio-applications through the diversity and durability of artificial nanozymes. An effective synergy with sufficient accessible active sites and high specific surface area is a challenge for composite catalysts, especially to avoid uncontrollable aggregation and structural instability. Here, we fabricated a Cu_nO/Au heterostructure dendrimer on copper foam (Cu_nO/Au HD/CF) as dual functional catalytic nanozyme to achieve enzyme mimic cascade reactions for efficient colorimetric analysis. A highly porous CF skeleton-based CuO nanowire array (CuO NWA) with a large specific surface area supported an efficient load capacity to assemble sufficient Cu_nO/Au HD by electrodeposition. The bimetallic Au-Cu nanozyme successfully achieved an oxidase-like and peroxidase-like cascade catalysis by a target-responsive sensing mechanism. Due to the confirmed catalytic performance of selectivity, anti-interference ability, and reproducibility, a Cu_nO/Au HD/CF-based quantitative analytical method was developed for glucose detection with a wide linear range and considerable detection limit of 8.4 μM. The robust nonenzymatic catalytic strategy for colorimetric detection not only confirmed the dual functional catalytic activity of Cu_nO/Au HD/CF, but also showed great potential for applications in clinical diagnostics and biochemical analysis.

Equipment-free, gold nanoparticle based semiquantitative assay of SARS-CoV-2-S1RBD IgG from fingertip blood: A practical strategy for on-site measurement of COVID-19 antibodies

COVID-19 remains as a major threat to human society. A reliable, sensitive, rapid, and low requirement assay for serum neutralizing antibodies is needed as a pandemic management tool for estimation of revaccination time and implementation of "immune passport". Using gold nanoparticle (AuNR) as an immunosensor, we have established a semi-quantitative, instrument-free assay for measuring antibody level against SRAS-CoV-2 spike1 (S1) receptor binding domain (RBD) from fingertip blood samples. The testing results by the developed method correlated well with those obtained from conventional ELISA assay, indicating reliable quantitation could be achieved without use of plate reader. A declined of immunoglobulin G (IgG) antibody associated with vaccination time was observed, which agreed well with the data from other reports. The developed method provides a potentially complementary strategy for on-site measurement of COVID-19 antibodies.

Combination of the lateral-flow immunoassay with multicolor gold nanorod etching for the semi-quantitative detection of digoxin

We demonstrated the first ever combination of the lateral-flow immunoassay (LFA) with gold nanorod etching to achieve a multicolor readout where the changes in color hue are more easily discernible than changes in intensity of a single color.

A multicolor biosensor for alkaline phosphatase activity detection based on the peroxidase activity of copper nanoclusters and etching of gold nanorods

A multicolor biosensor for ALP activity has been developed based on the peroxidase activity of copper nanoclusters and etching of gold nanorods.

Aptamer-engineered gold nanorod driven an absorbance enhanced strategy for sensitive biomacromolecule profiling

Gold nanorods (AuNRs)-based plasmonic biosensor offers new opportunity for quantification of biomacromolecules due to their high designability and low technical demands. However, existing methods for the optical detection of biomacromolecule require the targets to induce the aggregation or etching of AuNRs. This limits the range of targets that can be detected, because molecules at extremely low concentration are difficult to arouse aggregation or etching of AuNRs. Thus, it is still challenge to design a scheme for the biomacromolecules at extremely low concentration which can't arouse aggregation or etching of AuNRs based on their plasmonic property. This study proposes a universal absorbance enhanced strategy for biomacromolecule detection with aptamers engineered AuNRs. The biosensor assay (Apts/AuNRs) is designed through assembly of two aptamers on AuNRs to specified recognize the target biomacromolecules, forming closed-loop conformation based on the proximity-dependent ligation, producing absorbance enhancement in the plasmonic peak of AuNRs. It is interesting that the absorbance enhancement increases gradually with increasing protein concentration within a certain range, whereas no aggregation or etching of AuNRs was observed compared with the typical AuNRs based LSPR sensor. Taking advantage of the excellent near infrared light absorption of AuNRs, Apts/AuNRs could be utilized to detect red protein such as cytochrome C, which exhibited better performance than AuNPs based plasmonic sensor. On this basis, the selectivity detection of cytochrome C with the detection of limit down to picomole level was demonstrated. By changing the type of aptamers on AuNRs, the sensitive and credible method was also utilized for the analysis of telomerase activity in nerve cell lysate. Telomerase activity in 4 × 10⁴ neuroblastoma cell was determined to be about 3.575 U/L, which was close to the result of ELISA kit. Good recovery was achieved using standard samples recovery. This study broadens the scope of AuNRs based plasmonic ‬‬‬‬‬‬property ‬‬‬‬and offer a simple, sensitive and selective strategy for biomacromolecules detection in complexed biofluid.

Tannic Acid-Capped Gold Nanoparticles as a Novel Nanozyme for Colorimetric Determination of Pb2+ Ions

In this study, tannic acid-modified gold nanoparticles were found to have superior nanozyme activity and catalyze the oxidation reaction of 3,3′,5,5′-tetramethylbenzidine in the presence of hydrogen peroxide. Enhancing the catalytic activity of the nanozyme by Pb2+ ions caused by selectively binding metal ions by the tannic acid-capped surface of gold nanoparticles makes them an ideal colorimetric probe for Pb2+. The parameters of the reaction, including pH, incubation time, and concentration of components, were optimized to reach maximal sensitivity of Pb2+ detection. The absorption change is directly proportional to the Pb2+ concentration and allows the determination of Pb2+ ions within 10 min. The colorimetric sensor is characterized by a wide linear range from 25 to 500 ng×mL−1 with a low limit of detection of 11.3 ng×mL−1. The highly sensitive and selective Pb2+ detection in tap, drinking, and spring water revealed the feasibility and applicability of the developed colorimetric sensor.

Photothermal immunoassay for carcinoembryonic antigen based on the inhibition of cysteine-induced aggregation of gold nanoparticles by copper ion using a common thermometer as readout

The dispersed gold nanoparticles (AuNPs) have weak photothermal effect in near-infrared (NIR) region. After the addition of cysteine, the AuNPs are aggregated due to the electrostatic interaction and then exhibited strong photothermal effect. At present of copper ion (Cu²⁺), the cysteine was catalytically oxidized into cystine, leading to the inhibition of the aggregation of AuNPs and the photothermal effect decreased. Based on this, a simple photothermal assay can be developed for Cu²⁺ detection using a common thermometer as readout. The change of the temperature (ΔT) of the system has a linear relationship with Cu²⁺ in the range of 10-300 nM with a detection limit of 7.4 nM (S/N = 3). Furthermore, through labeling the detection antibody in immunoassay with CuO nanoparticles as the source of Cu²⁺, a convenient photothermal immunoassay can be developed. Carcinoembryonic antigen (CEA), an important biomarker for cancer screening, was chosen as the model target because the rise of CEA level is widely present in cancer blood serum. Under the optimized conditions, ΔT has a linear relationship with CEA concentration in the range of 3.0-48.0 ng/mL. The detection limit is 1.3 ng/mL. The proposed method had been applied to detect CEA in serum samples with good agreement with the reference method used in hospital.

Quantitative gold nanorods based photothermal biosensor for glucose using a thermometer as readout

To meet the increasing need for point-of-care testing (POCT), simple and portable readout strategies would be highly desirable. Thermometer with high accuracy and straightforward readout is an ideal tool for the development of new POCT methods. The exploration of new thermometer-based detection methods is of great significance. In this study, a simple biosensor for glucose based on the photothermal effect of gold nanorods using a simple thermometer as readout has been developed. In the presence of glucose oxidase, glucose can react with the dissolved oxygen to produce H₂O₂. With the help of Fe²⁺, H₂O₂ can etch gold nanorods (AuNRs) to different aspect ratios. The decrease of the aspect ratio of AuNRs leads to the blue-shift of the localized surface plasmon resonance peak, resulting in a decrease of photothermal effect in the near-infrared regions and the temperature of the system decreased. The change of the temperature has a linear relationship with the logarithm of glucose concentration in the range of 1.0-10.0 mM with a detection limit of 0.8 mM. The proposed method possesses a bias offset of -0.03 mM for glucose detection compared to the hospital method. Since many enzymatic reactions can produce H₂O₂, the principle can be modified to detect different targets by simply change of the enzyme used.

Effect of aspect ratio on the chirality of gold nanorods prepared through conventional seed-mediated growth method

In this work, three kinds of gold nanorods (AuNRs) with different aspect ratios were synthesized through conventional seed-mediated growth method, and the chirality of these AuNRs were characterized by circular dichroism (CD) spectroscopy. The results showed that the AuNRs with bigger aspect ratio had larger chirality. The AuNRs with different aspect ratios were applied to distinguish the enantiomers of 19 kinds of α-amino acids. It was found that AuNRs with bigger aspect ratio exhibited the stronger chiral recognition ability. As a proof-of-principle, the AuNRs with the aspect ratio of 4.8 were used to quantitatively recognize enantiomers of valine. Furthermore, the microcalorimetry was applied to study the interaction of AuNRs with amino acid enantiomers. This work provides one method to improve the chiral recognition ability of AuNRs by optimizing the aspect ratio of AuNRs, and helps people better understand the intrinsic chirality of nanostructures.

Plasmonic nanoparticles for colorimetric detection of nitrite and nitrate

Irregular and unknowingly use of chemical compounds is a serious threat to the environment, human health, and other living organisms attributable and intensified by the growing population and increasing demand for food. Nitrite and nitrate are among those compounds that are widely used in agricultural and industrial products. Therefore on-site, rapid, simple, and accurate monitoring of nitrite/nitrate is highly desirable. In this review, while emphasizing the importance of nitrite and nitrate in food chain safety and health of living organisms, their measurement methods, in particular, nanoplasmonic colorimetric sensors are comprehensively discussed based on the researches in this field. Nanoplasmonic-based sensors have proved to be successful in comparison with traditional methods due to their low cost, biocompatibility, high sensitivity and selectivity, and most importantly, the ability to visually detect and be used on-site to measure nitrite and nitrate. The design principle of nanoplasmonic sensors will be presented into two categories of aggregation- and etching-based detection followed by their applications in nitrite detection. The nitrate measurement will be discussed based on either direct detection of nitrate or indirect strategy in which nitrate is reduced to nitrite by enzymes or metals. Finally, the remaining challenges and prospects in this topic will be described and outlined.

A multicolor sensing system for simultaneous detection of four foodborne pathogenic bacteria based on Fe3O4/MnO2 nanocomposites and the etching of gold nanorods

Food safety problems attributed to foodborne pathogenic bacteria seriously endanger human health and cause substantial economic losses. Novel assays for rapid and sensitive identification of foodborne pathogenic bacteria are highly desired. In this study, a multicolor sensing system has been established for simultaneous determination of four foodborne bacteria by exploiting oxidase mimicking activity of aptamer-functionalized manganese dioxide-coated ferriferrous oxide (apt-Fe₃O₄/MnO₂) nanocomposites and oxTMB etching of gold nanorods (AuNRs). Apt-Fe₃O₄/MnO₂ nanocomposites were used as capture probes to recognize and capture specific bacteria. The captured bacteria blocked the catalytic sites of the magnetic conjugate, which inhibited the catalyzation of oxTMB and further reduced the etching of AuNRs. Consequently, the longitudinal shift of AuNRs decreased linearly with the increase of the concentration of bacteria ranging from 10 to 10⁶ CFU mL^-1. Instrumental detection limits for S. aureus, L. monocytogenes, E. coli O157:H7 and V. parahaemolyticus reached down to 1.3 CFU mL^-1, 1.2 CFU mL^-1, 1.3 CFU mL^-1 and 1.4 CFU mL^-1, respectively. And their visual detection limit was as low as 10 CFU mL^-1. The whole detection process only needs 40 min, suggesting that this method is promising in on-site detection of bacteria.

A multi-colorimetric immunosensor for visual detection of ochratoxin A by mimetic enzyme etching of gold nanobipyramids

A multi-colorimetric immunosensor basing on the mimetic enzyme etching of gold nanobipyramids (Au NBPs) was established to detect ochratoxin A (OTA). Octahedral Cu₂O nanoparticles were successfully synthesized through a selective surface stabilization strategy, which can exhibit a peroxidase-like ability to oxidize 3,3',5,5'-tetramethylbenzidine (TMB). Au NBPs can be etched by the product, TMB²⁺, to form a significant longitudinal peak blue shift of local surface plasmon resonance. During the construction of the immunosensor, the microplate was coated with dopamine to immobilized OTA antigens, followed by the immunoreaction of OTA antibody and the Cu₂O-labled secondary antibody. A linear relationship can be found between the local surface plasmon resonance (LSPR) peak changes with the logarithm of OTA concentration in a wide range from 1 ng/L to 5 μg/L, while the detection limit was 0.47 ng/L. Meanwhile, the approximate OTA concentration can be conveniently and intuitively observed by the vivid color changes. Benefiting from the high specificity, the proposed multi-colorimetric immunoassay detection of OTA in millet samples was achieved, indicating the available potential of the immunoassay for the determination of OTA in real samples.

Clinical Applications of Visual Plasmonic Colorimetric Sensing

Colorimetric analysis has become of great importance in recent years to improve the operationalization of plasmonic-based biosensors. The unique properties of nanomaterials have enabled the development of a variety of plasmonics applications on the basis of the colorimetric sensing provided by metal nanoparticles. In particular, the extinction of localized surface plasmon resonance (LSPR) in the visible range has permitted the exploitation of LSPR colorimetric-based biosensors as powerful tools for clinical diagnostics and drug monitoring. This review summarizes recent progress in the biochemical monitoring of clinical biomarkers by ultrasensitive plasmonic colorimetric strategies according to the distance- or the morphology/size-dependent sensing modes. The potential of colorimetric nanosensors as point of care devices from the perspective of naked-eye detection is comprehensively discussed for a broad range of analytes including pharmaceuticals, proteins, carbohydrates, nucleic acids, bacteria, and viruses such as Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). The practical suitability of plasmonic-based colorimetric assays for the rapid visual readout in biological samples, considering current challenges and future perspectives, is also reviewed.

Gold nanorods-based multicolor immunosensor for visual detection of enterovirus 71 infection

Based on the etching of gold nanorods (GNRs) and enzyme-linked immunosorbent assay (ELISA), a multicolor immunosensor for visual detection of enterovirus 71 infection is proposed. Once the immunocomplex is formed, the horseradish peroxidase bound to the ELISA plate oxidizes 3,3',5,5'-tetramethylbenzidine (TMB) into TMB²⁺ in the presence of hydrogen peroxide. Subsequently, TMB²⁺ quantitatively etches GNRs to the short GNRs, leading to a blue shift of longitudinal localized surface plasmon resonance and corresponding color responses. This change is used to develop two types of cut-off standards, which respond to the human anti-enterovirus at a concentration of 71 IgM antibody. The method has been validated with clinical serum samples and showed high sensitivity and specificity . This visual immunosensor has an important application value for point-of-care detection of EV71, especially in areas lacking detection equipment. Graphical abstract.

Real-Time Visualization of the Single-Nanoparticle Electrocatalytic Hydrogen Generation Process and Activity under Dark Field Microscopy

Visualizing a chemical reaction process is critical for understanding the mechanism of the reaction. For example, information on chemical reactions involving single nanocatalysts has significant implications for mechanism research and is vital for guiding the selection of the most active nanocatalysts. In this work, dark field microscopy (DFM) is utilized to observe the electrocatalytic reaction process of Au-Pt core-shell nanoparticles (AuNPs@Pt) as an example. Hydrogen ions were reduced to hydrogen (H₂) on the surface of AuNPs@Pt under a certain potential, forming H₂ nanobubbles covering the surface of AuNPs@Pt. As a result, the scattering intensity of the nanomaterial was observed to significantly increase under DFM. Therefore, the electrocatalytic reaction process could be monitored in real time by simply observing the scattering intensity change via DFM. Our investigation reveals a different nanobubble evolution process with an average nucleation time and lifetime of 0.69 and 32.34 s, respectively. Moreover, the catalytic activity between different nanomaterials was studied. The relationship between the Pt shell thickness and the average scattering intensity change reveals that the electrocatalytic activity is closely related to the Pt content. Finally, from the brightness of the scattering spot observed by DFM, the temporal and spatial distribution information on the catalytic activity could also be obtained, which is more abundant than the information obtained using the traditional electrochemical method.

Au nanoparticle preconcentration coupled with CE-electrochemiluminescence detection for sensitive analysis of fluoroquinolones in European eel (Anguilla anguilla)

In this work, a novel method based on gold nanoparticle preconcentration coupled with CE for electrochemiluminescence detection of ciprofloxacin, enrofloxacin, ofloxacin, and norfloxacin in European eels was developed. The addition of gold nanoparticles induced the rapid enrichment of fluoroquinolones, which was simpler than the conventional enrichment approaches such as solid phase extraction and solid-phase microextraction. More than 100 times enrichment was observed after gold nanoparticle aggregation-based preconcentration. The CE-electrochemiluminescence parameters that affected the separation and detection were optimized. Under the optimized conditions, the linear ranges for the four fluoroquinolones were 0.090-8.0 μmol L-1 with the detection limits between 0.020 and 0.050 μmol L-1. The proposed approach showed the advantages of high sensitivity, high selectivity, a wide linear range, and a low detection limit. It was used to analyze fluoroquinolones in European eel, and the results showed that the developed method can satisfy the detection requirements for fluoroquinolone determination in aquatic products set by China and the European Union.

Sensing Biomarkers with Plasmonics

The detection of biomarkers is critical for enabling early disease diagnosis, monitoring the progression, and tracking the effectiveness of therapeutic intervention. Plasmonic sensors exhibit a broad range of analytical capabilities, from the rapid generation of colorimetric readouts to single-molecule sensitivity in ultralow sample volumes, which have led to their increased exploration in bioanalysis and point-of-care applications. This perspective presents selected accounts of recent developments on the different types of plasmonic sensing platforms, the pervasive challenges, and outlook on the pathway to translation. We highlight the sensing of upcoming biomarkers, including microRNA, circulating tumor cells, exosomes, and cell-free DNA, and discuss the opportunity of utilizing plasmonic nanomaterials and tools for biomarker detection beyond biofluids, such as in tissues, organs, and disease sites. The integration of plasmonic biosensors with established and upcoming technologies of instrumentation, sample pretreatment, and data analysis will help realize their translation to clinical settings for improving healthcare and enhancing the quality of life.

Colorimetric aptasensor for ochratoxin A detection based on enzyme-induced gold nanoparticle aggregation

An innovative colorimetric method based on enzyme-induced gold nanoparticle aggregation was developed to detect the activity of alkaline phosphatase (ALP), and it was further applied to construct an aptasensor to monitor ochratoxin A (OTA) concentrations. In the presence of ALP, the substrate ascorbic acid 2-phosphate was hydrolyzed to generate ascorbic acid (AA). Subsequently, reduction of MnO₂ nanosheets by AA produced manganese ions, which mediated gold nanoparticle aggregation. The color of the detection solution changed from brown-red to purple to blue as the ALP concentration increased, and a detection limit of 0.05 U·L^-1 was achieved. Furthermore, this strategy was successfully utilized to devise a target-responsive aptasensor for colorimetric detection of an important mycotoxin, OTA, which causes food poisoning and has various toxic effects on humans. The proposed method offers high sensitivity with a detection limit as low as 5.0 nM together with high specificity. When applied to analyze red wine and grape juice samples, no complex sample pretreatment or bulky instruments were required. Overall, a colorimetric platform based on enzyme-induced gold nanoparticle aggregation was successfully established to improve the simplicity and sensitivity of ALP and OTA detection. This platform appears highly promising for mycotoxin-related food safety monitoring.

Multicolor colorimetric detection of ochratoxin A via structure-switching aptamer and enzyme-induced metallization of gold nanorods

Colorimetric aptasensors have been intensively studied for the ochratoxin A (OTA) detection, but they mostly exhibit just one-color change, resulting in poor visual resolution and limited use for semi-quantitative analysis. Thus, we designed a high-resolution colorimetric assay on the basis of aptamer structural switching and enzyme-induced metallization of gold nanorods (AuNRs). DNA-alkaline phosphatase (ALP)-immobilized magnetic beads were prepared. The aptamer bounded to OTA to form G-quadruplexes, releasing ALP-labelled complementary DNA (cDNA-ALP). After magnetic separation, cDNA-ALP catalyzed the decomposition of ascorbic acid 2-phosphate to ascorbic acid that reduced Ag⁺, forming an Ag shell on the surface of AuNRs. This caused a blue-shift of the longitudinal local surface plasmon resonance peak of the AuNRs and a naked eye visible multicolor change. Under optimal conditions, the assay exhibited a 9.0 nM detection limit for OTA, with high specificity. This method is promising for the on-site visual semi-quantitative detection of mycotoxins in foods.