Single-Cell Analysis Using Drop-on-Demand Inkjet Printing and Probe Electrospray Ionization Mass Spectrometry

Fully Integrated Recognition and Enrichment Electrospray Ionization Source for High-Sensitivity Mass Spectrometry Determination of Bioamine

The development of a highly specific recognition electrospray ionization source presents a major challenge for achieving rapid ambient mass spectrometry (AMS) detection of trace harmful substances in complex samples. In this study, we constructed a molecular imprinting nanofiber electrospinning membrane-coated steel substrate (MINMCS) based on the electrospinning strategy. This was designed as a highly specific recognition and enrichment electrospray ionization source module for AMS, where the molecular imprinting nanofiber membrane served as an excellent extraction and enrichment layer. The prepared ionization source demonstrated a sufficient loading capacity for three bioamines (BAs): histamine (HIS), tyramine (TYR), and tryptamine (TRY). With simplified sample pretreatment, this ionization source exhibited sensitivity comparable to that of high performance liquid chromatography-mass spectrometry (HPLC-MS/MS). Moreover, the entire analysis process could be completed within 1 min with acceptable recoveries (83.21-101.80%). In brief, this study introduces a new integrated recognition and enrichment electrospray ionization source for the detection of harmful substances such as bioamines, showcasing significant commercial potential for the rapid detection of foodborne harmful compounds.

Rapid Screening of Biomarkers in KYSE-150 Cells Exposed to Polycyclic Aromatic Hydrocarbons via Inkjet Printing Single-Cell Mass Spectrometry

Single-cell analysis by mass spectrometry (MS) is emerging as a powerful tool that not only contributes to cellular heterogeneity but also offers an unprecedented opportunity to predict pathology onset and facilitates novel biomarker discovery. However, the development of single-cell MS analysis techniques with a focus on sample extraction, separation, and ionization methods for volume-limited samples and complexity of cellular samples are still a big challenge. In this study, we present a high-throughput approach to inkjet drop on demand printing single-cell MS for rapid screening of biomarkers of polycyclic aromatic hydrocarbon (PAH) exposure at the KYSE-150 cell, aiming to elucidate the pathogenesis of PAH-induced esophageal cancer. With an analytical bulk KYSE-150 cell throughput of up to 51 cells per minute, the method provides a new opportunity for simultaneous single-cell analysis of multiple biomarkers. We screened 930 characteristic ions from 3,683 detected peak signals and identified 91 distinctive molecules that exhibited significant differences under various concentrations of PAH exposure. These molecules have potential as clinical diagnostic biomarkers. Additionally, the current study identifies specific biomarkers that behave completely opposite in single-cell and multicell lipidomics as the concentration of PAH changes. These biomarkers potentially subdivide KYSE-150 cells into PAH-sensitive and PAH-insensitive types, providing a basis for revealing PAH toxicity and disease pathogenesis from the heterogeneity of cellular metabolism.

Single-cell omics: experimental workflow, data analyses and applications

Cells are the fundamental units of biological systems and exhibit unique development trajectories and molecular features. Our exploration of how the genomes orchestrate the formation and maintenance of each cell, and control the cellular phenotypes of various organismsis, is both captivating and intricate. Since the inception of the first single-cell RNA technology, technologies related to single-cell sequencing have experienced rapid advancements in recent years. These technologies have expanded horizontally to include single-cell genome, epigenome, proteome, and metabolome, while vertically, they have progressed to integrate multiple omics data and incorporate additional information such as spatial scRNA-seq and CRISPR screening. Single-cell omics represent a groundbreaking advancement in the biomedical field, offering profound insights into the understanding of complex diseases, including cancers. Here, we comprehensively summarize recent advances in single-cell omics technologies, with a specific focus on the methodology section. This overview aims to guide researchers in selecting appropriate methods for single-cell sequencing and related data analysis.

A Novel Multiarmed Bifunctional PEG Derivative for the Preparation of Mass Spectrometry Ion Sources with Antifouling Property and High Selectivity

It is challenging to prepare a highly selective mass spectrometry (MS) ion source for the rapid and highly sensitive detection of analytes, especially mycotoxins. In this study, an amino and tetrazine bifunctionalized multiarm PEG derivative (NH2HCl-4armPEG10K-(MTz)3), which can be easily immobilized on the substrate by the addition reaction between amino and polydopamine, was used for the preparation of MS ionization substrate. NH2HCl-4armPEG10K-(MTz)3 can also be used as a linker to immobilize sufficient streptavidin (SA) on the surface of the substrate by a click reaction. The process further promotes the immobilization of broad-spectrum antibodies (3D4), which were used as the recognition element for ZEN and its metabolites. The prepared SSS-Au-PDA-4armPEG10K-SA-3D4 not only can rapidly enrich ZEN and its metabolites with high selectivity but also shows good antifouling properties in the matrix. After simple sample preparation, the prepared SSS-Au-PDA-4armPEG10K-SA-3D4 can be directly coupled with MS to achieve high sensitivity (LODs: 0.18-0.66 ng/mL, LOQs: 0.5-1.0 ng/mL) and selective detection of ZEN and its metabolites in the matrix. At the same time, satisfactory recoveries (83.60-97.80%) and precision (RSD: 2.80-9.10%) can also be obtained. The prepared SSS-Au-PDA-4armPEG10K-SA-3D4 is expected to provide a powerful tool for the rapid and highly sensitive determination of multiple targets by MS.

Increasing Fluid Viscosity Ensures Consistent Single-Cell Encapsulation

High-throughput single-cell analysis typically relies on the isolation of cells of interest in separate compartments for subsequent phenotypic or genotypic characterization. Using microfluidics, this is achieved by isolating individual cells in microdroplets or microwells. However, due to cell-to-cell variability in size, shape, and density, the cell capture efficiencies may vary significantly. This variability can negatively impact the measurements and introduce undesirable artifacts when trying to isolate and characterize heterogeneous cell populations. In this study, we show that single-cell isolation biases in microfluidics can be circumvented by increasing the viscosity of fluids in which cells are dispersed. At a viscosity of 40-50 cP (cP), the cell sedimentation is effectively reduced, resulting in a steady cell flow inside the microfluidics chip and consistent encapsulation in water-in-oil droplets over extended periods of time. This approach allows nearly all cells in a sample to be isolated with the same efficiency, irrespective of their type. Our results show that increased fluid viscosity, rather than cell-adjusted density, provides a more reliable approach to mitigate single-cell isolation biases.

Arc-Induced Electrospray Ionization Mass Spectrometry

Arc-induced electrospray ionization mass spectrometry (AESI-MS) was developed during which alternating current electrospray is simply achieved through the arc plasma. The AESI source exploits the arc's temperature and charge properties to generate aerosols consisting of charged microdroplets. The electrospray region, in which organic molecules are contained within microdroplets, partially overlaps with the arc plasma region. Guided by the electric field, these molecules undergo ionization, yielding ionic target analytes. AESI represents a soft ionization method that combines the mechanisms of atmospheric pressure chemical ionization and electrospray ionization, facilitating the ionization of analytes with wide ranging polarities. The precisely targeted spraying area enhances ion entry into the mass analyzer, thereby enabling excellent ionization efficiency. The AESI source exhibits several notable advantages over the electrospray ionization source, including an elevated but comparable level of active species concentrations and types, simplified mass spectra for direct amino acid analysis, high salt tolerance, versatile analysis of compounds with varying polarities, and reliable quantitative analysis of amino acids in complex matrices. Overall, AESI broadens the methodologies employed to generate microdroplets, providing a technological and scientific framework for creating distinctive electrospray ionization techniques.

Recent advances in droplet sequential monitoring methods for droplet sorting

Droplet microfluidics is an attractive technology to run parallel experiments with high throughput and scalability while maintaining the heterogeneous features of individual samples or reactions. Droplet sorting is utilized to collect the desired droplets based on droplet characterization and in-droplet content evaluation. A proper monitoring method is critical in this process, which governs the accuracy and maximum frequency of droplet handling. Until now, numerous monitoring methods have been integrated in the microfluidic devices for identifying droplets, such as optical spectroscopy, mass spectroscopy, electrochemical monitoring, and nuclear magnetic resonance spectroscopy. In this review, we summarize the features of various monitoring methods integrated into droplet sorting workflow and discuss their suitable condition and potential obstacles in use. We aim to provide a systematic introduction and an application guide for choosing and building a droplet monitoring platform.

Rapid Droplet Sampling Interface for Low-Volume, High-Throughput Mass Spectrometry Analysis

Here, we present a rapid droplet sampling interface (RDSI) electrospray ionization mass spectrometry (ESI-MS) system as a high-throughput, low-volume, noncontact, and minimal-carryover approach for characterization of liquids. Liquid characterization was achieved by combining droplet ejection with an open-face microflow capillary with a 2.5 μL/min continuous flow of carrier solvent. Through this implementation, single 0.3 nL droplets containing the analyte effectively mix with 4-8 nL of carrier solvent and create a combined electrospray plume. The carrier solvent continuously cleaned the system, eliminating carryover. A sampling rate of 5 Hz was achieved for droplets containing 1 μM propranolol or 5 μM leu-enkephalin with each droplet fully baseline-resolved (138 ± 32 ms baseline-to-baseline). Using a SCIEX API4000 mass spectrometer, a lower limit of quantification (LLOQ) of propranolol was 15 nM, corresponding to 1.16 fg of propranolol in the droplet, and was linear across 3 orders of magnitude. Quantitation could be achieved by adding an isotopically labeled internal standard, as done in conventional ESI. Signal transients were faster than the acquisition speed of the mass spectrometer, resulting in artificially high reproducibility of 15-30% RSD droplet-to-droplet. Analyte-solvent mixing ratios could be controlled by adjusting droplet positioning along the open-face capillary with an optimal position about 0.4 mm from the tip end. The range of analyte coverage was exemplified by measures of peptides and drugs in methanol, water, and buffer solutions. In a comparison to the Open Port Sampling Interface (OPSI) implemented on the same system, the RDSI had 78× greater sensitivity, 6× greater throughput and used significantly less carrier solvent.

Metabolomics in drug research and development: The recent advances in technologies and applications

Emerging evidence has demonstrated the vital role of metabolism in various diseases or disorders. Metabolomics provides a comprehensive understanding of metabolism in biological systems. With advanced analytical techniques, metabolomics exhibits unprecedented significant value in basic drug research, including understanding disease mechanisms, identifying drug targets, and elucidating the mode of action of drugs. More importantly, metabolomics greatly accelerates the drug development process by predicting pharmacokinetics, pharmacodynamics, and drug response. In addition, metabolomics facilitates the exploration of drug repurposing and drug-drug interactions, as well as the development of personalized treatment strategies. Here, we briefly review the recent advances in technologies in metabolomics and update our knowledge of the applications of metabolomics in drug research and development.

Analytical Techniques for Single-Cell Biochemical Assays of Lipids

Lipids are essential cellular components forming membranes, serving as energy reserves, and acting as chemical messengers. Dysfunction in lipid metabolism and signaling is associated with a wide range of diseases including cancer and autoimmunity. Heterogeneity in cell behavior including lipid signaling is increasingly recognized as a driver of disease and drug resistance. This diversity in cellular responses as well as the roles of lipids in health and disease drive the need to quantify lipids within single cells. Single-cell lipid assays are challenging due to the small size of cells (∼1 pL) and the large numbers of lipid species present at concentrations spanning orders of magnitude. A growing number of methodologies enable assay of large numbers of lipid analytes, perform high-resolution spatial measurements, or permit highly sensitive lipid assays in single cells. Covered in this review are mass spectrometry, Raman imaging, and fluorescence-based assays including microscopy and microseparations.

Advances in droplet digital polymerase chain reaction on microfluidic chips

The PCR technique has been known to the general public since the pandemic outbreak of COVID-19. This technique has progressed through three stages: from simple PCR to real-time fluorescence PCR to digital PCR. Among them, the microfluidic-based droplet digital PCR technique has attracted much attention and has been widely applied due to its advantages of high throughput, high sensitivity, low reagent consumption, low cross-contamination, and absolute quantification ability. In this review, we introduce various designs of microfluidic-based ddPCR developed within the last decade. The microfluidic-based droplet generation methods, thermal cycle strategies, and signal counting approaches are described, and the applications in the fields of single-cell analysis, disease diagnosis, and pathogen detection are introduced. Further, the challenges and prospects of microfluidic-based ddPCR are discussed. We hope that this review can contribute to the further development of the microfluidic-based ddPCR technique.

Mass spectrometry-based strategies for single-cell metabolomics

Single cell analysis has drawn increasing interest from the research community due to its capability to interrogate cellular heterogeneity, allowing refined tissue classification and facilitating novel biomarker discovery. With the advancement of relevant instruments and techniques, it is now possible to perform multiple omics including genomics, transcriptomics, metabolomics or even proteomics at single cell level. In comparison with other omics studies, single-cell metabolomics (SCM) represents a significant challenge since it involves many types of dynamically changing compounds with a wide range of concentrations. In addition, metabolites cannot be amplified. Although difficult, considerable progress has been made over the past decade in mass spectrometry (MS)-based SCM in terms of processing technologies and biochemical applications. In this review, we will summarize recent progress in the development of promising MS platforms, sample preparation methods and SCM analysis of various cell types (including plant cell, cancer cell, neuron, embryo cell, and yeast cell). Current limitations and future research directions in the field of SCM will also be discussed.

Low-Cost Light-Based GelMA 3D Bioprinting via Retrofitting: Manufacturability Test and Cell Culture Assessment

Light-based bioprinter manufacturing technology is still prohibitively expensive for organizations that rely on accessing three-dimensional biological constructs for research and tissue engineering endeavors. Currently, most of the bioprinting systems are based on commercial-grade-based systems or modified DIY (do it yourself) extrusion apparatuses. However, to date, few examples of the adoption of low-cost equipment have been found for light-based bioprinters. The requirement of large volumes of bioinks, their associated cost, and the lack of information regarding the parameter selection have undermined the adoption of this technology. This paper showcases the retrofitting and assessing of a low-cost Light-Based 3D printing system for tissue engineering. To evaluate the potential of a proposed design, a manufacturability test for different features, machine parameters, and Gelatin Methacryloyl (GelMA) concentrations for 7.5% and 10% was performed. Furthermore, a case study of a previously seeded hydrogel with C2C12 cells was successfully implemented as a proof of concept. On the manufacturability test, deviational errors were found between 0.7% to 13.3% for layer exposure times of 15 and 20 s. Live/Dead and Actin-Dapi fluorescence assays after 5 days of culture showed promising results in the cell viability, elongation, and alignment of 3D bioprinted structures. The retrofitting of low-cost equipment has the potential to enable researchers to create high-resolution structures and three-dimensional in vitro models.

Recent progress in mass spectrometry for single-cell metabolomics

Metabolites are the end products of cellular vital activities and can reflect the state of cellular to a certain extent. Rapid change of metabolites and the low abundance of signature metabolites cause difficulties in single-cell detection, which is a great challenge in single-cell metabolomics analysis. Mass spectrometry (MS) is a powerful tool that uniquely suited to detect intracellular small-molecule metabolites and has shown good application in single-cell metabolite analysis. In this mini-review, we describe three types of emerging technologies for MS-based single-cell metabolic analysis in recent years, including nano-ESI-MS based single-cell metabolomics analysis, high-throughput analysis via flow cytometry, and cellular metabolic imaging analysis. These techniques provide a large amount of single-cell metabolic data, allowing the potential of MS in single-cell metabolic analysis is gradually being explored and is of great importance in disease and life science research.

Single-cell mass spectrometry

Owing to recent advances in mass spectrometry (MS), tens to hundreds of proteins, lipids, and small molecules can be measured in single cells. The ability to characterize the molecular heterogeneity of individual cells is necessary to define the full assortment of cell subtypes and identify their function. We review single-cell MS including high-throughput, targeted, mass cytometry-based approaches and antibody-free methods for broad profiling of the proteome and metabolome of single cells. The advantages and disadvantages of different methods are discussed, as well as the challenges and opportunities for further improvements in single-cell MS. These methods is being used in biomedicine in several applications including revealing tumor heterogeneity and high-content drug screening.

Inkjet Printing and 3D Printing Strategies for Biosensing, Analytical, and Diagnostic Applications

Inkjet printing and 3D inkjet printing have found many applications in the fabrication of a great variety of devices, which have been developed with the aim to improve and simplify the design, fabrication, and performance of sensors and analytical platforms. Here, developments of these printing technologies reported during the last 10 years are reviewed and their versatile applicability for the fabrication of improved sensing platforms and analytical and diagnostic sensor systems is demonstrated. Illustrative examples are reviewed in the context of particular advantages provided by inkjet printing technologies. Next to aspects of device printing and fabrication strategies, the utilization of inkjet dispensing, which can be implemented into common analytical tools utilizing customized inkjet printing equipment as well as state-of-the-art consumer inkjet printing devices, is highlighted. This review aims to providing a comprehensive overview of examples integrating inkjet and 3D inkjet printing technologies into device layout fabrication, dosing, and analytical applications to demonstrate the versatile applicability of these technologies, and furthermore, to inspire the utilization of inkjet printing for future developments.

Single-cell sequencing: expansion, integration and translation

With the rapid advancement in sequencing technologies, the concept of omics has revolutionized our understanding of cellular behaviors. Conventional omics investigation approaches measure the averaged behaviors of multiple cells, which may easily hide signals represented by a small-cell cohort, urging for the development of techniques with enhanced resolution. Single-cell RNA sequencing, investigating cell transcriptomics at the resolution of a single cell, has been rapidly expanded to investigate other omics such as genomics, proteomics and metabolomics since its invention. The requirement for comprehensive understanding of complex cellular behavior has led to the integration of multi-omics and single-cell sequencing data with other layers of information such as spatial data and the CRISPR screening technique towards gained knowledge or innovative functionalities. The development of single-cell sequencing in both dimensions has rendered it a unique field that offers us a versatile toolbox to delineate complex diseases, including cancers.

Nebulization Swab Assisted Photoionization Tandem Miniaturized Ion Trap Mass Spectrometry for On-Site Analysis of Nonvolatile Compounds

Nonvolatile compounds usually have a high molecular weight and exhibit a high boiling point, which poses great challenges to the ionization method of MS. Ambient ionization sources can efficiently analyze the nonvolatile compounds without complex pretreatment, but they generally require special media such as heating devices, laser optical devices, or corona needles. Acoustic nebulization assisted photoionization (ANPI) is a potential method for the analysis of nonvolatile compounds that uses nebulization as a prerequisite for photoionization and introduces many advantages of PI, including excellent ionization efficiency, a high yield of molecular ions, and simplified spectrum interpretation. However, the ANPI source can be limited in on-site applications by the complexity of the analytical devices and the high cost of the nebulization chip. To address this issue, in this paper, we explored cheap and commercially piezoelectric materials used in a mist sprayer and fabricated a nebulization swab assisted photoionization (NSAP) as an ambient ionization source. Some useful results are presented: numerical simulation was introduced successfully for optimizing the aerosol distribution in the NSAP source; nonvolatile muscle relaxants, drugs of abuse, antibiotics, phthalates, and cholesterol were detected mostly as their protonated molecular ions while some special acetone/water cluster ions were detected. In addition, the LOD for most of the target analytes ranged from 10.0 to 50.0 pg with RSD ≤ 9%. Finally, this method is implemented for Chinese baijiu spiked with phthalates. The experimental data shows the capability of a NSAP source in high sensitivity and on-site analysis of the nonvolatile compounds.

Advances in Single-Cell Printing

Single-cell analysis is becoming an indispensable tool in modern biological and medical research. Single-cell isolation is the key step for single-cell analysis. Single-cell printing shows several distinct advantages among the single-cell isolation techniques, such as precise deposition, high encapsulation efficiency, and easy recovery. Therefore, recent developments in single-cell printing have attracted extensive attention. We review herein the recently developed bioprinting strategies with single-cell resolution, with a special focus on inkjet-like single-cell printing. First, we discuss the common cell printing strategies and introduce several typical and advanced printing strategies. Then, we introduce several typical applications based on single-cell printing, from single-cell array screening and mass spectrometry-based single-cell analysis to three-dimensional tissue formation. In the last part, we discuss the pros and cons of the single-cell strategies and provide a brief outlook for single-cell printing.

Towards high throughput and high information coverage: advanced single-cell mass spectrometric techniques

Mass spectrometry (MS) is attractive for single-cell analysis because of its high sensitivity, rich information, and large dynamic ranges, especially for the single-cell metabolome and proteome analysis. Efforts have been made to deal with the throughput and information coverage problems in typical manual single-cell MS techniques. In this review, advanced techniques to improve the automation and throughput for single-cell sampling and single-cell metabolome and proteome MS detection have been discussed. Furthermore, representative MS-based strategies that can increase the in-depth cellular information coverage and achieve the more comprehensive single-cell multiomics information during high throughput detection have been highlighted, providing an ongoing perspective of the MS performance for the single-cell research.

[Research advances of high-throughput cell-based drug screening systems based on microfluidic technique]

药物筛选是新药研发的关键步骤,创新药物的发现需要采用适当的药物作用靶点对大量化合物样品进行筛选。高通量筛选系统能够实现数千个反应同时测试和分析,大大提高了药物筛选的实验规模和效率。其中基于细胞水平的高通量药物筛选系统因为更加接近人体生理条件,成为主要的筛选模式。而目前发展成熟的高通量细胞筛选系统主要基于多孔板,存在细胞培养条件单一、耗时费力、试剂消耗量大等问题,且较难实现复杂的组合药物筛选。微流控技术作为一种在微米尺度通道中操纵和控制微流体的技术,具有微量、高效、高通量和自动化的优点,能较好地克服多孔板筛选系统的不足,为构建细胞高通量药物筛选系统提供了一种高效、可靠的技术手段。微流控系统在细胞培养材料、芯片结构设计和流体控制方面均可灵活变化,能更好地实现对细胞生长微环境的调控和模拟。文章综述了基于微流控技术的细胞水平高通量药物筛选系统的研究进展,按照不同的微流体操控模式,对基于灌注流、液滴和微阵列的3种类型的微流控细胞筛选系统进行了分类介绍,并分别总结了它们的优缺点,最后展望了微流控细胞水平高通量药物筛选系统的发展前景,提出了该领域目前存在的问题以及解决问题的方向。

Single Cell Metabolite Detection Using Inertial Microfluidics-Assisted Ion Mobility Mass Spectrometry

Single-cell metabolite measurement remains highly challenging due to difficulties related to single cell isolation, metabolite detection, and identification of low levels of metabolites. Here, as a first step of the technological development, we propose a novel strategy integrating spiral inertial microfluidics and ion mobility mass spectrometry (IM-MS) for single-cell metabolite detection and identification. Cells in methanol suspension are inertially focused into a single stream in the spiral microchannel. This stream of separated cells is delivered to the nanoelectrospray needle to be lysed and ionized and subsequently analyzed in real time by IM-MS. This analytical system enables six to eight single-cell metabolic fingerprints to be collected per minute, including gas-phase collisional cross section (CCS) measurements as an additional molecular descriptor, giving increased confidence in metabolite identification. As a proof of concept, the metabolic profiles of three types of cancer cells (U2OS, HepG2, and HepG2.215) were successfully screened, and 19 distinct lipids species were identified with CCS value filtering. Furthermore, principal component analysis (PCA) showed differentiation of the three cancer cell lines, mainly due to cellular surface phospholipids. Taken together, our technology platform offers a simple and efficient method for single-cell lipid profiling, with additional ion mobility separation of lipids significantly improving the confidence toward identification of metabolites.

Recent advances in single-cell analysis: Encapsulation materials, analysis methods and integrative platform for microfluidic technology

Traditional cell biology researches on cell populations by their origin, tissue, morphology, and secretions. Because of the heterogeneity of cells, research at the single-cell level can obtain more accurate and comprehensive information that reflects the physiological state and process of the cell, increasing the significance of single-cell analysis. The application of single-cell analysis is faced with the problem of contaminated or damaged cells caused by cell sample transportation. Reversible encapsulation of a single cell can protect cells from the external environment and open the encapsulation shell to release cells, thus preserving cell integrity and improving extraction efficiency of analytes. Meanwhile, microfluidic single cell analysis (MSCA) exhibits integration, miniaturization, and high throughput, which can considerably improve the efficiency of single-cell analysis. The researches on single-cell reversible encapsulation materials, single-cell analysis methods, and the MSCA integration platform are analyzed and summarized in this review. The problems of single-cell viability, network of single-cell signal, and simultaneous detection of multiple biotoxins in food based on single-cell are proposed for future research.

Applying Probe Electrospray Ionization Mass Spectrometry to Cytological Diagnosis: A Preliminary Study by Using Cultured Lung Cancer Cells

OBJECTIVES

Cytology and histology are 2 indispensable diagnostic tools for cancer diagnosis, which are rapidly increasing in importance with aging populations. We applied mass spectrometry (MS) as a rapid approach for swiftly acquiring nonmorphological information of interested cells. Conventional MS, which primarily rely on promoting ionization by pre-applying a matrix to cells, has the drawback of time-consuming both on data acquisition and analysis. As an emerging method, probe electrospray ionization-MS (PESI-MS) with a dedicated probe is capable to pierce sample and measure specimen in small amounts, either liquid or solid, without the requirement for sample pretreatment. Furthermore, PESI-MS is timesaving compared to the conventional MS. Herein, we investigated the capability of PESI-MS to characterize the cell types derived from the respiratory tract of human tissues.

STUDY DESIGN

PESI-MS analyses with DPiMS-2020 were performed on various type of cultured cells including 5 lung squamous cell carcinomas, 5 lung adenocarcinomas, 5 small-cell carcinomas, 4 malignant mesotheliomas, and 2 normal controls.

RESULTS

Several characteristic peaks were detected at around m/z 200 and 800 that were common in all samples. As expected, partial least squares-discriminant analysis of PESI-MS data distinguished the cancer cell types from normal control cells. Moreover, distinct clusters divided squamous cell carcinoma from adenocarcinoma.

CONCLUSION

PESI-MS presented a promising potential as a novel diagnostic modality for swiftly acquiring specific cytological information.

Single-cell lipidomics with high structural specificity by mass spectrometry

Single-cell analysis is critical to revealing cell-to-cell heterogeneity that would otherwise be lost in ensemble analysis. Detailed lipidome characterization for single cells is still far from mature, especially when considering the highly complex structural diversity of lipids and the limited sample amounts available from a single cell. We report the development of a general strategy enabling single-cell lipidomic analysis with high structural specificity. Cell fixation is applied to retain lipids in the cell during batch treatments prior to single-cell analysis. In addition to tandem mass spectrometry analysis revealing the class and fatty acyl-chain for lipids, batch photochemical derivatization and single-cell droplet treatment are performed to identify the C=C locations and sn-positions of lipids, respectively. Electro-migration combined with droplet-assisted electrospray ionization enables single-cell mass spectrometry analysis with easy operation but high efficiency in sample usage. Four subtypes of human breast cancer cells are correctly classified through quantitative analysis of lipid C=C location or sn-position isomers in ~160 cells. Most importantly, the single-cell deep lipidomics strategy successfully discriminates gefitinib-resistant cells from a population of wild-type human lung cancer cells (HCC827), highlighting its unique capability to promote precision medicine.

Inkjet printing based ultra-small MnO2 nanosheets synthesis for glutathione sensing

Manganese dioxide (MnO₂) with small size is competent in sensing applications, but its synthesis generally adopts templates or in complex ways. Inkjet printing technique with excellent performance offers a versatile tool due to its stability, flexibility, economy. Herein, an inkjet printing method was developed for rapid synthesis of ultra-small MnO₂ nanosheets. The findings validated the feasibility of inkjet printing method for MnO₂ nanosheets synthesis and achieved the demand of small size and facile mode. Additionally, the limit of detection (LOD) of ultra-small MnO₂ nanosheets in glutathione (GSH) sensing achieved 0.26 μM, which was about 40% more sensitive than that of the typical MnO₂ nanosheets, enabling the establishment of a rapid and efficient modality for sensitive and selective GSH sensing. By virtue of the inkjet printing approach, the ultra-small MnO₂ nanosheets was obtained in a short time without complicated fabricating process. It can be foreseen that the proposed inkjet printing approach would facilitate the application prospects of ultra-small MnO₂ nanosheets in diverse fields. Such a facile approach may open new avenues for synthesis of ultra-small or ultrafine nanomaterials.

Cell Analysis on Microfluidics Combined with Mass Spectrometry

Cell analysis is of great significance for the exploration of human diseases and health. However, there are not many techniques for high-throughput cell analysis in the simulated cell microenvironment. The high designability of the microfluidic chip enables multiple kinds of cells to be co-cultured on the chip, with other functions such as sample preprocessing and cell manipulation. Mass spectrometry (MS) can detect a large number of biomolecules without labelling. Therefore, the application of the microfluidic chip coupled with MS has represented a major branch of cell analysis over the past decades. Here, we concisely introduce various microfluidic devices coupled with MS used for cell analysis. The main functions of microfluidic devices are described first, followed by introductions of different interfaces with different types of MS. Then, their various applications in cell analysis are highlighted, with an emphasis on cell metabolism, drug screening, and signal transduction. Current limitations and prospective trends of microfluidics coupled with MS are discussed at the end.

Single cell metabolomics using mass spectrometry: Techniques and data analysis

Mass spectrometry (MS) based techniques are gaining popularity for metabolomics research due to their high sensitivity, wide detection range, and capability of molecular identification. Utilizing such powerful technique to explore the cellular metabolism at the single cell level not only appreciates the subtle cell-to-cell difference (i.e., cell heterogeneity), but also gains biological merits corresponding to individual cells or small cell subpopulations. In this review article, we first briefly summarize recent advances in single cell MS experimental techniques, and then emphasize on the single cell metabolomics data analysis approaches. Through implementation of statistical analysis and more advanced data analysis methods, single cell metabolomics is expected to find more potential applications in the translational and clinical fields in the future.

Lipidomic profiling of single mammalian cells by infrared matrix-assisted laser desorption electrospray ionization (IR-MALDESI)

To better understand cell-to-cell heterogeneity, advanced analytical tools are in a growing demand for elucidating chemical compositions of each cell within a population. However, the progress of single-cell chemical analysis has been restrained by the limitations of small cell volumes and minute cellular concentrations. Here, we present a rapid and sensitive method for investigating the lipid profiles of isolated single cells using infrared matrix-assisted laser desorption electrospray ionization mass spectrometry (IR-MALDESI-MS). In this work, HeLa cells were dispersed onto a glass slide, and the cellular contents were ionized by IR-MALDESI and measured using a Q-Exactive HF-X mass spectrometer. Importantly, this approach does not require extraction and/or enrichment of analytes prior to MS analysis. Using this approach, 45 distinct lipid species, predominantly phospholipids, were detected and putatively annotated from the single HeLa cells. The proof-of-concept study demonstrates the feasibility and efficacy of IR-MALDESI-MS for rapid lipidomic profiling of single cells, which provides an important basis for future work on differentiation between normal and diseased cells at various developmental states, which can offer new insights into cellular metabolic pathways and pathological processes. Although not yet accomplished, we believe this approach can be readily used as an assessment tool to compare the number of identified species during source evolution and method optimization (intra-laboratory), and also disclose the complementary nature of different direct analytical approaches for the coverage of different types of endogenous analytes (inter-laboratory).Graphical abstract.

Direct analysis of surface chemicals using vibrating sharp-edge spray ionization mass spectrometry

RATIONALE

Direct analysis of chemicals on a surface using mass spectrometry (MS) is of great importance in forensics, food and drug safety, environmental monitoring, and defense. Solvent extraction-based surface analysis offers a convenient way of controlling the desorption conditions and applying internal standards. To date, it mainly relies on a separate electrospray process to nebulize and ionize the solvents. Here, we report a simple and stand-alone ionization system for the solvent extraction-based surface analysis without the need for high voltage, based on vibrating sharp-edge spray ionization (VSSI).

METHODS

We modified the original VSSI device and developed a stand-alone, integrated surface sampling, and ionization system for MS analysis. By incorporating a micropipette-based solvent dispenser with the VSSI device, the new system performs solvent extraction and ionization, and still maintains a small footprint.

RESULTS

We demonstrated a four order-of-magnitude linear response for glucose spotted on a glass surface with a limit of detection (LOD) of 0.1 pg/mm² . We further characterized the performance of this method with a series of compounds and demonstrated a similar LOD to literature values obtained by desorption electrospray ionization. Finally, we applied this method to quantitatively measure the concentration of a pesticide ametryn on spinach surfaces. We demonstrated good linearity (R² = 0.99) for ametryn with surface densities in the range of 8-800 pg/mm² and an LOD of 9 pg/mm² .

CONCLUSIONS

We have demonstrated a simple, effective, direct ambient-ionization method that is highly sensitive to molecules on a wide range of surfaces. The flexibility, small footprint, low cost, and voltage-free nature of this method make it an attractive technique for direct surface sample analysis using MS.

Inkjet Bioprinting of Biomaterials

The inkjet technique has the capability of generating droplets in the picoliter volume range, firing thousands of times in a few seconds and printing in the noncontact manner. Since its emergence, inkjet technology has been widely utilized in the publishing industry for printing of text and pictures. As the technology developed, its applications have been expanded from two-dimensional (2D) to three-dimensional (3D) and even used to fabricate components of electronic devices. At the end of the twentieth century, researchers were aware of the potential value of this technology in life sciences and tissue engineering because its picoliter-level printing unit is suitable for depositing biological components. Currently inkjet technology has been becoming a practical tool in modern medicine serving for drug development, scaffold building, and cell depositing. In this article, we first review the history, principles and different methods of developing this technology. Next, we focus on the recent achievements of inkjet printing in the biological field. Inkjet bioprinting of generic biomaterials, biomacromolecules, DNAs, and cells and their major applications are introduced in order of increasing complexity. The current limitations/challenges and corresponding solutions of this technology are also discussed. A new concept, biopixels, is put forward with a combination of the key characteristics of inkjet printing and basic biological units to bring a comprehensive view on inkjet-based bioprinting. Finally, a roadmap of the entire 3D bioprinting is depicted at the end of this review article, clearly demonstrating the past, present, and future of 3D bioprinting and our current progress in this field.

Combining Mass Spectrometry with Paternò-Büchi Reaction to Determine Double-Bond Positions in Lipids at the Single-Cell Level

Single cell MS (SCMS) techniques are under rapid development for molecular analysis of individual cells among heterogeneous populations. Lipids are basic cellular constituents playing essential functions in energy storage and the cellular signaling processes of cells. Unsaturated lipids are characterized with one or multiple carbon-carbon double (C═C) bonds, and they are critical for cell functions and human diseases. Characterizing unsaturated lipids in single cells allows for better understanding of metabolomic biomarkers and therapeutic targets of rare cells (e.g., cancer stem cells); however, these studies remain challenging. We developed a new technique using a micropipette needle, in which Paternò-Büchi (PB) reactions at C═C bond can be induced, to determine locations of C═C bonds in unsaturated lipids at the single-cell level. The micropipette needle is produced by combining a pulled glass capillary needle with a fused silica capillary. Cell lysis solvent and PB reagent (acetone or benzophenone) are delivered into the micropipette needle (tip size ≈ 15 um) through a fused silica capillary. The capillary needle plays multiple functions (i.e., single cell sampling probe, cell lysis container, microreactor, and nano-ESI emitter) in the experiments. Both regular (no reaction) and reactive (with PB reaction) SCMS analyses of the same cell can be achieved. C═C bond locations were determined from MS scan and MS/MS of PB products assisted by Python programs. This technique can potentially be used for other reactive SCMS studies to enhance molecular analysis for broad ranges of single cells.

Electrohydrodynamic Atomization for Minimum Quantity Lubrication (EHDA-MQL) in End Milling Ti6Al4V Titanium Alloy

Titanium alloy Ti6Al4V is a difficult-to-machine material which is extensively used in the aerospace and medical industries. Machining titanium is associated with a short tool life and low productivity. In this paper, a new cooling-lubrication system based on electrohydrodynamic atomization was designed, manufactured and tested and the relevant theory was developed. The major novelty of the system lies within the use of electrohydrodynamic atomization (EHDA) and a three-electrode setup for generating lubricant droplets. The system was tested and compared with that of flood, minimum quantity lubrication (MQL) and compressed air machining. The proposed system can extend the tool life by 6 and 22 times when compared with MQL and flood cooling, respectively. This is equivalent to more than 170 min tool life at 120 m/min cutting speed allowing for significant productivity gains in machining Ti6Al4V.

Nanoliter-Scale Droplet-Droplet Microfluidic Microextraction Coupled with MALDI-TOF Mass Spectrometry for Metabolite Analysis of Cell Droplets

The further miniaturization of liquid-phase microextraction (LPME) systems has important significance and major challenges for microscale sample analysis. Herein, we developed a rapid and flexible droplet-droplet microfluidic microextraction approach to perform nanoliter-scale miniaturized sample pretreatment, by combining droplet-based microfluidics, robotic liquid handling, and LPME techniques. Differing from the previous microextraction methods, both the extractant and sample volumes were decreased from the microliter scale or even milliliter scale to the nanoliter scale. We utilized the ability of a liquid-handling robot to manipulate nanoliter-scale droplets and micrometer-scale positioning to overcome the scaling effect difficulties in performing liquid-liquid extraction of nanoliter-volume samples in microsystems. Two microextraction modes, droplet-in-droplet microfluidic microextraction and droplet-on-droplet microfluidic microextraction, were developed according to the different solubility properties of the extractants. Various factors affecting the microextraction process were investigated, including the extraction time, recovery method of the extractant droplet, static and dynamic extraction mode, and cross-contamination. To demonstrate the validity and adaptability of the pretreatment and analysis of droplet samples with complex matrices, the present microextraction system coupled with MALDI-TOF mass spectrometry (MS) detection was applied to the quantitative determination of 7-ethyl-10-hydroxylcamptothecin (SN-38), an active metabolite of the anticancer drug irinotecan, in 800-nL droplets containing HepG2 cells. A linear relationship (y = 0.0305x + 0.376, R² = 0.984) was obtained in the range of 4-100 ng/mL, with the limits of detection and quantitation being 2.2 and 4.5 ng/mL for SN-38, respectively.

Acoustic Microfluidics

Acoustic microfluidic devices are powerful tools that use sound waves to manipulate micro- or nanoscale objects or fluids in analytical chemistry and biomedicine. Their simple device designs, biocompatible and contactless operation, and label-free nature are all characteristics that make acoustic microfluidic devices ideal platforms for fundamental research, diagnostics, and therapeutics. Herein, we summarize the physical principles underlying acoustic microfluidics and review their applications, with particular emphasis on the manipulation of macromolecules, cells, particles, model organisms, and fluidic flows. We also present future goals of this technology in analytical chemistry and biomedical research, as well as challenges and opportunities.

Concentrating Single Cells in Picoliter Droplets for Phospholipid Profiling on a Microfluidic System

Cellular membranes are composed of a variety of lipids in different amounts and proportions, and alterations of them are usually closely related to various diseases. To reveal the intercellular heterogeneity of the lipid variation, an integrated microfluidic system is designed, which consists of droplet-based inkjet printing, dielectrophoretic electrodes, and de-emulsification interface to achieve on-line single-cell encapsulation, manipulation, and mass spectrometry (MS) detection. This integrated system effectively improves the single-cell encapsulation rate, and meanwhile reduces the matrix interference and continuous oil phase interference to the MS detection. Using this system, the heterogeneities between the normal and cancer cells are compared, and the heterogeneity of the same cells before and after the drug treatment changed obviously, indicating that this system can be used as a promising tool for studying the link between the alterations of lipid homeostasis and various diseases.

Microarray and Mass Spectrometry-Based Methodology for Lipid Profiling of Tissues and Cell Cultures

The recent developments in mass spectrometry have revealed the importance of lipids as biomarkers in the context of different diseases and as indicators of the cell's homeostasis. However, further advances are required to unveil the complex relationships between lipid classes and lipid species with proteins. Here, we present a new methodology that combines microarrays with mass spectrometry to obtain the lipid fingerprint of samples of a different nature in a standardized and fast way, with minimal sample consumption. As a proof of concept, we use the methodology to obtain the lipid fingerprint of 20 rat tissues and to create a lipid library for tissue classification. Then, we combine those results with immunohistochemistry and enzymatic assays to unveil the relationship between some lipid species and two enzymes. Finally, we demonstrate the performance of the methodology to explore changes in lipid composition of the nucleus accumbens from mice subjected to two lipid diets.