Digital Single Virus Electrochemical Enzyme-Linked Immunoassay for Ultrasensitive H7N9 Avian Influenza Virus Counting

Closed Bipolar Nanoelectrode Array for Ultra-Sensitive Detection of Alkaline Phosphatase and Two-Dimensional Imaging of Epidermal Growth Factor Receptors

The combination of closed bipolar electrodes (cBPE) with electrochemiluminescence (ECL) imaging has demonstrated remarkable capabilities in the field of bioanalysis. Here, we established a cBPE-ECL platform for ultrasensitive detection of alkaline phosphatase (ALP) and two-dimensional imaging of epidermal growth factor receptor (EGFR). This cBPE-ECL system consists of a high-density gold nanowire array in anodic aluminum oxide (AAO) membrane as the cBPE coupled with ECL of highly luminescent cadmium selenide quantum dots (CdSe QDs) luminophores to achieve cathodic electro-optical conversion. When an enzyme-catalyzed amplification effect of ALP with 4-aminophenyl phosphate monosodium salt hydrate (p-APP) as the substrate and 4-aminophenol (p-AP) as the electroactive probe is introduced, a significant improvement of sensing sensitivity with a detection limit as low as 0.5 fM for ALP on the cBPE-ECL platform can be obtained. In addition, the cBPE-ECL sensing system can also be used to detect cancer cells with an impressive detection limit of 50 cells/mL by labeling ALP onto the EGFR protein on A431 human epidermal cancer cell membranes. Thus, two-dimensional (2D) imaging of the EGFR proteins on the cell surface can be achieved, demonstrating that the established cBPE-ECL sensing system is of high resolution for spatiotemporal cell imaging.

A point-of-care solid-phase colorimetric sensor based on the enzyme-induced metallization for ALP detection

Alkaline phosphatase (ALP) is a crucial biomarker for clinical diagnosis, which is closely related to the physiological homeostasis regulation process of human body. And the abnormal level of ALP is associated with numerous diseases, such as liver dysfunction, bone diseases, diabetes, and so on. In order to meet the demand of personalized healthcare, it is particularly important to develop a miniaturized point-of-care testing (POCT) device for ALP detection. Herein, a portable solid-phase colorimetric sensor based on enzyme-induced metallization signal amplification strategy was constructed for ALP detection. The AuNPs modified on the glass slides acted as crystal seeds, allowing Ag+ in the solution to be reduced and deposited on the surface of AuNPs, which further formed the gold core and silver shell (Au@Ag) complex and generated visual signals. The visual signals were recorded by a smartphone and quantified using open-source ImageJ software. Under the optimal conditions, the proposed method exhibited a good linear relationship from 2.0 to 16.0 pM, and the detection limit was as low as 0.9 pM. In addition, it was further successfully applied for ALP detection in non-transparent and complex samples (milk, different types of cells). A sensitive, low cost, rapid and convenient solid-phase sensor was developed for ALP detection, which was expected to provide a promising strategy for POCT devices.

Perspectives for the creation of a new type of vaccine preparations based on pseudovirus particles using polio vaccine as an example

Traditional antiviral vaccines are currently created by inactivating the virus chemically, most often using formaldehyde or β-propiolactone. These approaches are not optimal since they negatively affect the safety of the antigenic determinants of the inactivated particles and require additional purification stages. The most promising platforms for creating vaccines are based on pseudoviruses, i.e., viruses that have completely preserved the outer shell (capsid), while losing the ability to reproduce owing to the destruction of the genome. The irradiation of viruses with electron beam is the optimal way to create pseudoviral particles. In this review, with the example of the poliovirus, the main algorithms that can be applied to characterize pseudoviral particles functionally and structurally in the process of creating a vaccine preparation are presented. These algorithms are, namely, the analysis of the degree of genome destruction and coimmunogenicity. The structure of the poliovirus and methods of its inactivation are considered. Methods for assessing residual infectivity and immunogenicity are proposed for the functional characterization of pseudoviruses. Genome integrity analysis approaches, atomic force and electron microscopy, surface plasmon resonance, and bioelectrochemical methods are crucial to structural characterization of the pseudovirus particles.

Functional Nanomaterials Enhancing Electrochemical Biosensors as Smart Tools for Detecting Infectious Viral Diseases

Electrochemical biosensors are known as analytical tools, guaranteeing rapid and on-site results in medical diagnostics, food safety, environmental protection, and life sciences research. Current research focuses on developing sensors for specific targets and addresses challenges to be solved before their commercialization. These challenges typically include the lowering of the limit of detection, the widening of the linear concentration range, the analysis of real samples in a real environment and the comparison with a standard validation method. Nowadays, functional nanomaterials are designed and applied in electrochemical biosensing to support all these challenges. This review will address the integration of functional nanomaterials in the development of electrochemical biosensors for the rapid diagnosis of viral infections, such as COVID-19, middle east respiratory syndrome (MERS), influenza, hepatitis, human immunodeficiency virus (HIV), and dengue, among others. The role and relevance of the nanomaterial, the type of biosensor, and the electrochemical technique adopted will be discussed. Finally, the critical issues in applying laboratory research to the analysis of real samples, future perspectives, and commercialization aspects of electrochemical biosensors for virus detection will be analyzed.

MnO4--Triggered Immediate-Stable Real-Time Fluorescence Immunosensor with High Response Speed and Low Steady-State Error

Real-time chemical and biological sensing in vitro is important for application in health and environmental monitoring. Thus, a more rapid and stable detection method is urgently needed. Herein, an immediate-stable real-time fluorescent immunosensor with a high response speed (∼100%, <1 s) and approximately zero steady-state error is constructed. The developed sensor is based on the MnO₄^--triggered in situ immediate-stable fluorogenic reaction between dopamine and orcinol monohydrate to produce azamonardine (DMTM). The obtained DMTM is identified and characterized by high-resolution mass spectrometry, ¹H NMR spectroscopy, ¹³C NMR spectroscopy, and theoretical calculations. The present sensor achieves a highly sensitive detection of dopamine (DA) with a limit of detection (LOD) of 10 nM as well as alkaline phosphates (ALP) with an LOD of 0.1 mU/mL by using orcinol monohydrate phosphate sodium salt as a substrate. As a proof of concept, ALP-triggered fluorescence ELISA using cardiac troponin I (cTnI) as a model antigen target is further constructed. The developed real-time sensor achieves the detection of cTnI with an LOD of 0.05 ng/mL. Moreover, the sensor proposed by us is successfully applied to assess the cTnI level in clinical serum specimens and yields results consistent with those obtained by the commercial ELISA method. The immediate-stable real-time fluorescence immunosensor provides a promising and powerful platform for the trace detection of biomolecules in clinical diagnosis.

Quantitative performance of digital ELISA for the highly sensitive quantification of viral proteins and influenza virus

A single-molecule assay (SiMoA) using a digital enzyme-linked immunosorbent assay (ELISA) has been attracting attention as a promising method that can detect viruses with ultra-high sensitivity. However, the quantitative application of digital ELISA has not been adequately reported. Therefore, in this study, we first evaluated the linearity and sensitivity of digital ELISA using a Certified Reference Material of C-reactive protein (NMIJ CRM 6201-c) as a quality control material. Next, we originally screened those antibody pair that are suitable for detecting recombinant viral proteins of influenza A virus, nucleoprotein (NP), and hemagglutinin (HA), and established the measurement system. Under optimized conditions, the limit of detection (LOD) of NP and HA was 0.59 fM and 0.99 fM, and the coefficient of determination, R², was 0.9998 and 0.9979, respectively. Two subtypes of influenza virus, A/Puerto Rico/8/1934 (H1N1) [PR8] and A/Panama/2007/99 (H3N2) [Pan99], were also quantified under established conditions, and the LOD of PR8 was 3.1 × 10² PFU/mL on targeting NP and 7.4 × 10² PFU/mL on targeting HA. The LOD of Pan99 was 5.3 × 10² PFU/mL on targeting NP. The specificity and robustness of the recombinant viral protein and influenza virus measurements using digital ELISA were also evaluated. Our measurement system showed enough specificity to discriminate the viral subtypes properly and showed sufficient inter- and intra-assay variations for both measurements of recombinant viral proteins and viruses, except for NP-targeting virus measurement.

Electro-Nano Diagnostic Platform Based on Antibody-Antigen Interaction: An Electrochemical Immunosensor for Influenza A Virus Detection

H1N1 is a kind of influenza A virus that causes serious health issues throughout the world. Its symptoms are more serious than seasonal flu and can sometimes be lethal. For this reason, rapid, accurate, and effective diagnostic tests are needed. In this study, an electrochemical immunosensor for the sensitive, selective, and practical detection of the H1N1 virus was developed. The sensor platform included multi-walled carbon nanotube gold-platinum (MWCNT-Au-Pt) hybrid nanomaterial and anti-hemagglutinin (anti-H1) monoclonal antibody. For the construction of this biosensor, a gold screen-printed electrode (AuSPE) was used as a transducer. Firstly, AuSPE was modified with MWCNT-Au-Pt hybrid nanomaterial via drop casting. Anti-H1 antibody was immobilized onto the electrode surface after the modification process with cysteamine was applied. Then, the effect of the interaction time with cysteamine for surface modification was investigated. Following that, the experimental parameters, such as the amount of hybrid nanomaterial and the concentration of anti-H1 were optimized. Under the optimized conditions, the analytical characteristics of the developed electrochemical immunosensor were investigated for the H1N1 virus by using electrochemical impedance spectroscopy. As a result, a linear range was obtained between 2.5-25.0 µg/mL with a limit of the detection value of 3.54 µg/mL. The relative standard deviation value for 20 µg/mL of the H1N1 virus was also calculated and found as 0.45% (n = 3). In order to determine the selectivity of the developed anti-H1-based electrochemical influenza A immunosensor, the response of this system towards the H3N2 virus was investigated. The matrix effect was also investigated by using synthetic saliva supplemented with H1N1 virus.

Overview on the Design of Magnetically Assisted Electrochemical Biosensors

Electrochemical biosensors generally require the immobilization of recognition elements or capture probes on the electrode surface. This may limit their practical applications due to the complex operation procedure and low repeatability and stability. Magnetically assisted biosensors show remarkable advantages in separation and pre-concentration of targets from complex biological samples. More importantly, magnetically assisted sensing systems show high throughput since the magnetic materials can be produced and preserved on a large scale. In this work, we summarized the design of electrochemical biosensors involving magnetic materials as the platforms for recognition reaction and target conversion. The recognition reactions usually include antigen-antibody, DNA hybridization, and aptamer-target interactions. By conjugating an electroactive probe to biomolecules attached to magnetic materials, the complexes can be accumulated near to an electrode surface with the aid of external magnet field, producing an easily measurable redox current. The redox current can be further enhanced by enzymes, nanomaterials, DNA assemblies, and thermal-cycle or isothermal amplification. In magnetically assisted assays, the magnetic substrates are removed by a magnet after the target conversion, and the signal can be monitored through stimuli-response release of signal reporters, enzymatic production of electroactive species, or target-induced generation of messenger DNA.

Construction of an Ultrasensitive Molecularly Imprinted Virus Sensor Based on an "Explosive" Secondary Amplification Strategy for the Visual Detection of Viruses

Viral outbreaks have caused great disruptions to the economy and public health in recent years. The accurate detection of viruses is a key factor in controlling and overcoming epidemics. In this study, an ultrasensitive molecularly imprinted virus sensor was developed based on an "explosive" secondary amplification strategy. Magnetic particles coated with carbon quantum dots (Fe₃O₄@CDs) were used as carriers and fluorescent probes, while aptamers were introduced into the imprinting layer to enhance the specific recognition of the target virus enterovirus 71 (EV71). When EV71 was captured by the imprinted particles, the fluorescence of the CDs was quenched, especially after binding to the aptamer-modified ZIF-8 loaded with a large amount of phenolphthalein, thereby resulting in signal amplification. Then, when adjusting the pH of the solution to 12, the decomposition of ZIF-8 released phenolphthalein, which turned the solution red, leading to the second "explosive" amplification of the signal. Therefore, the detection of EV71 with ultrasensitivity was achieved, which allows for visual detection by the naked eye in the absence of any instruments. The detection limits for fluorescence and visualization detection were 8.33 fM and 2.08 pM, respectively. In addition, a satisfactory imprinting factor of 5.4 was achieved, and the detection time only needed 20 min. It is expected that this fluorescence-colorimetric dual-mode virus molecularly imprinted sensor will show excellent prospects in epidemic prevention and rapid clinical diagnosis.

Recent Advances in Digital Biosensing Technology

Digital biosensing assays demonstrate remarkable advantages over conventional biosensing systems because of their ability to achieve single-molecule detection and absolute quantification. Unlike traditional low-abundance biomarking screening, digital-based biosensing systems reduce sample volumes significantly to the fL-nL level, which vastly reduces overall reagent consumption, improves reaction time and throughput, and enables high sensitivity and single target detection. This review presents the current technology for compartmentalizing reactions and their applications in detecting proteins and nucleic acids. We also analyze existing challenges and future opportunities associated with digital biosensing and research opportunities for developing integrated digital biosensing systems.

Determination of lentiviral titer by surface enhanced Raman scattering

Lentiviruses are commonly used to deliver genetic code into host cells for biomedical applications, such as gene therapy, pharmaceuticals, and vaccine development. Knowing the infectious titer of these virus particles is critical for development in these areas. Current methods of determining viral titer often require cell culture, where a cell is infected and the inserted genetic code is expressed in a known number of cells, which can require days or weeks to prepare and analyze samples. To provide a more rapid method of determining viral titer, the use of surface enhanced Raman spectroscopy (SERS) was explored. SERS provides both chemical and structural information by using plasmonic metallic nanostructures to amplify the Raman signal. Two different lentiviruses, one with a vector encoding a GFP gene and the same virus without the GFP gene included, were analyzed by SERS in viral production media at various concentrations. The SERS response was demonstrated to be sensitive to the incorporation of the GFP gene into the viral vector. Chemometric analysis using multivariate curve resolution (MCR) was able to identify a component in the observed SERS spectra that correlated with the concentration of GFP containing virus particles. Using the MCR model and the SERS response, the viral titer of lentivirus encoding for GFP was determined. The viral titer determined by SERS agreed well with expression of the GFP in infected cells. The SERS response using different metals and excitation wavelengths was also explored. Overall, this work demonstrates the utility of SERS for rapid determination of lentiviral titer.

Paper-based electrochemical immunosensor for label-free detection of multiple avian influenza virus antigens using flexible screen-printed carbon nanotube-polydimethylsiloxane electrodes

Many studies have been conducted on measuring avian influenza viruses and their hemagglutinin (HA) antigens via electrochemical principles; most of these studies have used gold electrodes on ceramic, glass, or silicon substrates, and/or labeling for signal enhancement. Herein, we present a paper-based immunosensor for label-free measurement of multiple avian influenza virus (H5N1, H7N9, and H9N2) antigens using flexible screen-printed carbon nanotube-polydimethylsiloxane electrodes. These flexible electrodes on a paper substrate can complement the physical weakness of the paper-based sensors when wetted, without affecting flexibility. The relative standard deviation of the peak currents was 1.88% when the electrodes were repeatedly bent and unfolded twenty times with deionized water provided each cycle, showing the stability of the electrodes. For the detection of HA antigens, approximately 10-μl samples (concentration: 100 pg/ml–100 ng/ml) were needed to form the antigen–antibody complexes during 20–30 min incubation, and the immune responses were measured via differential pulse voltammetry. The limits of detections were 55.7 pg/ml (0.95 pM) for H5N1 HA, 99.6 pg/ml (1.69 pM) for H7N9 HA, and 54.0 pg/ml (0.72 pM) for H9N2 HA antigens in phosphate buffered saline, and the sensors showed good selectivity and reproducibility. Such paper-based sensors are economical, flexible, robust, and easy-to-manufacture, with the ability to detect several avian influenza viruses.

Current Lifetime of Single-Nanoparticle Collision for Sizing Nanoparticles

Accurate size analysis of nanoparticles (NPs) is vital for nanotechnology. However, this cannot be realized based on conventional single-nanoparticle collision (SNC) because the current intensity, a thermodynamic parameter of SNC for sizing NPs, is always smaller than the theoretical value due to the effect of NP movements on the electrode surface. Herein, a size-dependent dynamic parameter of SNC, current lifetime, which refers to the time that the current intensity decays to 1/e of the original value, was originally utilized to distinguish differently sized NPs. Results showed that the current lifetime increased with NP size. After taking the current lifetime into account rather than the current intensity, the overlap rates for the peak-type current transients of differently sized Pt NPs (10 and 15 nm) and Au NPs (18 and 35 nm) reduced from 73 and 7% to 45 and 0%, respectively, which were closer to the theoretical values (29 and 0%). Hence, the proposed SNC dynamics-based method holds great potential for developing reliable electrochemical approaches to evaluate NP sizes accurately.

Modified ELISA for Ultrasensitive Diagnosis

An enzyme-linked immunosorbent assay (ELISA) can be used for quantitative measurement of proteins, and improving the detection sensitivity to the ultrasensitive level would facilitate the diagnosis of various diseases. In the present review article, we first define the term 'ultrasensitive'. We follow this with a survey and discussion of the current literature regarding modified ELISA methods with ultrasensitive detection and their application for diagnosis. Finally, we introduce our own newly devised system for ultrasensitive ELISA combined with thionicotinamide adenine dinucleotide cycling and its application for the diagnosis of infectious diseases and lifestyle-related diseases. The aim of the present article is to expand the application of ultrasensitive ELISAs in the medical and biological fields.

Micro/nanotechnology-inspired rapid diagnosis of respiratory infectious diseases

Humans have suffered from a variety of infectious diseases since a long time ago, and now a new infectious disease called COVID-19 is prevalent worldwide. The ongoing COVID-19 pandemic has led to research of the effective methods of diagnosing respiratory infectious diseases, which are important to reduce infection rate and help the spread of diseases be controlled. The onset of COVID-19 has led to the further development of existing diagnostic methods such as polymerase chain reaction, reverse transcription polymerase chain reaction, and loop-mediated isothermal amplification. Furthermore, this has contributed to the further development of micro/nanotechnology-based diagnostic methods, which have advantages of high-throughput testing, effectiveness in terms of cost and space, and portability compared to conventional diagnosis methods. Micro/nanotechnology-based diagnostic methods can be largely classified into (1) nanomaterials-based, (2) micromaterials-based, and (3) micro/nanodevice-based. This review paper describes how micro/nanotechnologies have been exploited to diagnose respiratory infectious diseases in each section. The research and development of micro/nanotechnology-based diagnostics should be further explored and advanced as new infectious diseases continue to emerge. Only a handful of micro/nanotechnology-based diagnostic methods has been commercialized so far and there still are opportunities to explore.

Gold nanoparticles in virus detection: Recent advances and potential considerations for SARS-CoV-2 testing development

Viruses are infectious agents that pose significant threats to plants, animals, and humans. The current coronavirus disease 2019 pandemic, which is caused by severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2), has spread globally and resulted in over 2 million deaths and immeasurable financial losses. Rapid and sensitive virus diagnostics become crucially important in controlling the spread of a pandemic before effective treatment and vaccines are available. Gold nanoparticle (AuNP)‐based testing holds great potential for this urgent unmet biomedical need. In this review, we describe the most recent advances in AuNP‐based viral detection applications. In addition, we discuss considerations for the design of AuNP‐based SARS‐CoV‐2 testings. Finally, we highlight and propose important parameters to consider for the future development of effective AuNP‐based testings that would be critical for not only this COVID‐19 pandemic, but also potential future outbreaks.

This article is categorized under:

Diagnostic Tools > Biosensing

Diagnostic Tools > In Vitro Nanoparticle‐Based Sensing

Advancements in electrochemical biosensing for respiratory virus detection: A review

Respiratory viruses are real menace for human health which result in devastating epidemic disease. Consequently, it is in urgent need of identifying and quantifying virus with a rapid, sensitive and precise approach. The study of electrochemical biosensors for respiratory virus detection has become one of the most rapidly developing scientific fields. Recent developments in electrochemical biosensors concerning respiratory virus detection are comprehensively reviewed in this paper. This review is structured along common detecting objects of respiratory viruses, electrochemical biosensors, electrochemical biosensors for respiratory virus detection and future challenges. The electrochemical biosensors for respiratory virus detection are introduced, including nucleic acids-based, immunosensors and other affinity biosensors. Lastly, for Coronavirus disease 2019 (COVID-19) diagnosis, the future challenges regarding developing electrochemical biosensor-based Point-of-Care Tests (POCTs) are summarized. This review is expected to provide a helpful guide for the researchers entering this interdisciplinary field and developing more novel electrochemical biosensors for respiratory virus detection.

Sensitive antibody fluorescence immunosorbent assay (SAFIA) for rapid on-site detection on avian influenza virus H9N2 antibody

Avian influenza virus (AIV) is a serious zoonotic disease causing severe damages to both poultry industry and human health. To rapidly detect AIV on-site with high sensitivity and accuracy, we design sensitive antibody fluorescence immunosorbent assay (SAFIA) on AIV H9N2 antibody. In SAFIA, hemagglutinin (HA1) protein coated sample chamber specifically binds targets but remarkably reduces non-specific absorption; Protein L coated polystyrene microsphere captures target through secondary antibody to significantly amplify the fluorescence signal; and a portable fluorescence counter automatically measures the fluorescence spot density for AIV H9N2 antibody detection. Proved by practical applications, SAFIA could probe AIV H9N2 antibody in high sensitivity and selectivity, and distinguish positive and negative serum samples in high accuracy. Additionally, SAFIA can rapidly detect AIV H9N2 antibody at room temperature only requiring simple operations as well as cost-effective and compact devices. Therefore, SAFIA is a potential new-generation tool in rapid on-site testing for agricultures.

Biosensing strategies for the electrochemical detection of viruses and viral diseases - A review

Viruses are the causing agents for many relevant diseases, including influenza, Ebola, HIV/AIDS, and COVID-19. Its rapid replication and high transmissibility can lead to serious consequences not only to the individual but also to collective health, causing deep economic impacts. In this scenario, diagnosis tools are of significant importance, allowing the rapid, precise, and low-cost testing of a substantial number of individuals. Currently, PCR-based techniques are the gold standard for the diagnosis of viral diseases. Although these allow the diagnosis of different illnesses with high precision, they still present significant drawbacks. Their main disadvantages include long periods for obtaining results and the need for specialized professionals and equipment, requiring the tests to be performed in research centers. In this scenario, biosensors have been presented as promising alternatives for the rapid, precise, low-cost, and on-site diagnosis of viral diseases. This critical review article describes the advancements achieved in the last five years regarding electrochemical biosensors for the diagnosis of viral infections. First, genosensors and aptasensors for the detection of virus and the diagnosis of viral diseases are presented in detail regarding probe immobilization approaches, detection methods (label-free and sandwich), and amplification strategies. Following, immunosensors are highlighted, including many different construction strategies such as label-free, sandwich, competitive, and lateral-flow assays. Then, biosensors for the detection of viral-diseases-related biomarkers are presented and discussed, as well as point of care systems and their advantages when compared to traditional techniques. Last, the difficulties of commercializing electrochemical devices are critically discussed in conjunction with future trends such as lab-on-a-chip and flexible sensors.

Single-Particle Electrochemical Biosensor with DNA Walker Amplification for Ultrasensitive HIV-DNA Counting

Single-particle electrochemical collision has gained great achievements in fundamental research, but it is challenging to use in practice on account of its low collision frequency and the interference of the complex matrix in actual samples. Here, magnetic separation and DNA walker amplification were integrated to build a robust and sensitive single-particle electrochemical biosensor. Magnetic nanobeads (MBs) can specifically capture and separate targets from complex samples, which not only ensures the anti-interference capability of this method but also avoids the aggregation of platinum nanoparticles (Pt NPs) caused by numerous coexisting substances. A low amount of targets can lead to the release of more Pt NPs and the generation of more collision current transients, realizing cyclic amplification. Compared with simple hybridization, a DNA walker can improve the collision frequency by about 3-fold, greatly enhancing detection sensitivity, and a relationship between collision frequency and target concentration is used to realize quantification. The biosensor realized an ultrasensitive detection of 4.86 fM human immunodeficiency virus DNA (HIV-DNA), which is 1-4 orders of magnitude lower than that of traditional methods. The successful HIV-DNA detection in complex systems (serum and urine) demonstrated a great promising application in real samples and in the development of new single-entity biosensors.

Avidin-biotin complex-based capture coating platform for universal Influenza virus immobilization and characterization

Influenza virus mutates quickly and unpredictably creating emerging pathogenic strains that are difficult to detect, diagnose, and characterize. Conventional tools to study and characterize virus, such as next generation sequencing, genome amplification (RT-PCR), and serological antibody testing, are not adequately suited to rapidly mutating pathogens like Influenza virus where the success of infection heavily depends on the phenotypic expression of surface glycoproteins. Bridging the gap between genome and pathogenic expression remains a challenge. Using sialic acid as a universal Influenza virus binding receptor, a novel virus avidin-biotin complex-based capture coating was developed and characterized that may be used to create future diagnostic and interrogation platforms for viable whole Influenza virus. First, fluorescent FITC probe studies were used to optimize coating component concentrations. Then atomic force microscopy (AFM) was used to profile the surface characteristics of the novel capture coating, acquire topographical imaging of Influenza particles immobilized by the coating, and calculate the capture efficiency of the coating (over 90%) for all four representative human Influenza virus strains tested.

Recent progress in nanomaterial-based sensing of airborne viral and bacterial pathogens

Airborne pathogens are small microbes that can cause a multitude of diseases (e.g., the common cold, flu, asthma, anthrax, tuberculosis, botulism, and pneumonia). As pathogens are transmitted from infected hosts via a number of routes (e.g., aerosolization, sneezing, and coughing), there is a great demand to accurately monitor their presence and behavior. Despite such need, conventional detection methods (e.g., colony counting, immunoassays, and various molecular techniques) generally suffer from a number of demerits (e.g., complex, time-consuming, and labor-intensive nature). To help overcome such limitations, nanomaterial-based biosensors have evolved as alternative candidates to realize portable, rapid, facile, and direct on-site identification of target microbes. In this review, nano-biosensors developed for the detection of airborne pathogens are listed and discussed in reference to conventional options. The prospects for the development of advanced nano-biosensors with enhanced accuracy and portability are also discussed.

Bioinspired synthesis of protein-posnjakite organic-inorganic nanobiohybrid for biosensing applications

This study demonstrated a facile, green and bioinspired approach to synthesize protein-posnjakite nanobiohybrid with rod-assembled hollow shuttle-like structure. Through the one-pot mild coprecipitation process, the inorganic mineral posnjakite (Cu₄(SO₄) (OH)₆·H₂O) served as a nanocarrier to efficient co-immobilization of recognition protein (streptavidin) and enzyme (horseradish peroxidase) for signal amplification, which avoids tedious linking or purification procedures and significantly simplifies the synthetic process. This nanobiohybrid was then utilized as the signal tag for immunoassays and presented excellent performance for the detection of insecticidal crystalline (Cry) protein Cry1Ab, in the linear range of 0.1-40 ng mL^-1, with the limit of detection of 63 pg mL^-1. This proposed strategy is expected to the integration of a variety of biomolecules with posnjakite to design diverse multifunctional nanobiohybrids for multiple applications extending from biosensors, catalysis and biomedicine to environmental science and energy.

A Size-Selectively Biomolecule-Immobilized Nanoprobe-Based Chemiluminescent Lateral Flow Immunoassay for Detection of Avian-Origin Viruses

In this study, a signal-amplifiable nanoprobe-based chemiluminescent lateral flow immunoassay (CL-LFA) was developed to detect avian influenza viruses (AIV) and other contagious and fatal viral avian-origin diseases worldwide. Signal-amplifiable nanoprobes are capable of size-selective immobilization of antibodies (binding receptors) and enzymes (signal transducers) on sensitive paper-based sensor platforms. Particle structure designs and conjugation pathways conducive for antigen accessibility to maximum amounts of immobilized enzymes and antibodies have advanced. The detection limit of the CL-LFA using the signal-amplifiable nanoprobe for the nucleoprotein of the H3N2 virus was 5 pM. Sensitivity tests for low pathogenicity avian influenza H9N2, H1N1, and high pathogenicity avian influenza H5N9 viruses were conducted, and the detection limits of CL-LFA were found to be 10^3.5 50% egg infective dose (EID₅₀)/mL, 10^2.5 EID₅₀/mL, and 10⁴ EID₅₀/mL, respectively, which is 20 to 100 times lower than that of a commercial AIV rapid test kit. Moreover, CL-LFA demonstrated high sensitivity and specificity against 37 clinical samples. The signal-amplifiable probe designed in this study is a potential diagnostic probe with ultrahigh sensitivity for applications in the field of clinical diagnosis, which requires sensitive antigen detection as evidenced by enhanced signaling capacity and sensitivity of the LFAs.

Dual modality sensor using liposome-based signal amplification technique for ultrasensitive norovirus detection

Sensitive and accurate detection methods for infectious viruses are the pressing need for effective disease diagnosis and treatment. Herein, based on V₂O₅ nanoparticles-encapsulated liposomes (VONP-LPs) we demonstrate a dual-modality sensing platform for ultrasensitive detection of the virus. The sensing performance relies on intrinsic peroxidase and electrochemical redox property of V₂O₅ nanoparticles (V₂O₅ NPs). The target-specific antibody-conjugated VONP-LPs and magnetic nanoparticles (MNPs) enrich the virus by magnetic separation and the separated VONP-LPs bound viruses are hydrolyzed to release the encapsulated V₂O₅ NPs. These released nanoparticles from captured liposomes act as peroxidase mimics and electrochemical redox indicator resulting in noticeable colorimetric and robust electrochemical dual-signal. Utilizing the superiority of dual-modality sensor with two quantitative analysis forms, norovirus like particles (NoV-LPs) can be detected by electrochemical signals with a wide linear range and low detection limit. To verify the applicability in real samples, norovirus (NoV) collected from actual clinical samples are effectively-identified with excellent accuracy. This proposed detection method can be a promising next-generation bioassay platform for early-stage diagnosis of virus disease and surveillance for public health.

Ultrasensitive Visualization of Virus via Explosive Catalysis of an Enzyme Muster Triggering Gold Nano-aggregate Disassembly

Sensitive and accurate diagnosis of viral infection is important for human health and social safety. Herein, by means of explosive catalysis from an enzyme muster, a powerful naked-eye readout platform has been successfully constructed for ultrasensitive immunoassay of viral entities. Liposomes were used to encapsulate multiple enzymes into an active unit. In addition, its triggered rupture could boost the disassembly of gold nano-aggregates that were cross-linked by peptides with opposite charges. As a result, plasmonically colorimetric signals were rapidly generated for naked-eye observation. Further harnessing the immunocapture, enterovirus 71 (EV71), a class of highly infective virus, was sensitively assayed with a detection limit down to 16 copies/μL. It is superior to the single enzyme-anchored immunoassay system. Most importantly, the colorimetric assay was demonstrated with 100% clinical accuracy, displaying strong anti-interference capability. It is expectable that this sensitive, accurate, and convenient strategy could provide a prospective alternative for viral infection analysis, especially in resource-constrained settings.

Electrochemical virus detections with nanobiosensors

Infectious diseases are caused from pathogens, which need a reliable and fast diagnosis. Today, expert personnel and centralized laboratories are needed to afford much time in diagnosing diseases caused from pathogens.

Recent progress in electrochemical studies shows that biosensors are very simple, accurate, precise, and cheap at virus detection, for which researchers find great interest in this field. The clinical levels of these pathogens can be easily analyzed with proposed biosensors. Their working principle is based on affinity between antibody and antigen in body fluids. The progress still continues on these biosensors for accurate, rapid, reliable sensors in future.

Single-molecule biosensors: Recent advances and applications

Single-molecule biosensors serve the unmet need for real time detection of individual biological molecules in the molecular crowd with high specificity and accuracy, uncovering unique properties of individual molecules which are hidden when measured using ensemble averaging methods. Measuring a signal generated by an individual molecule or its interaction with biological partners is not only crucial for early diagnosis of various diseases such as cancer and to follow medical treatments but also offers a great potential for future point-of-care devices and personalized medicine. This review summarizes and discusses recent advances in nanosensors for both in vitro and in vivo detection of biological molecules offering single-molecule sensitivity. In the first part, we focus on label-free platforms, including electrochemical, plasmonic, SERS-based and spectroelectrochemical biosensors. We review fluorescent single-molecule biosensors in the second part, highlighting nanoparticle-amplified assays, digital platforms and the utilization of CRISPR technology. We finally discuss recent advances in the emerging nanosensor technology of important biological species as well as future perspectives of these sensors.

Polymerization nicking-triggered LAMP cascades enable exceptional signal amplification for aptamer-based label-free detection of trace proteins in human serum

Detecting molecular biomarkers in high sensitivity plays an important role in the diagnosis of various diseases at the early stage. Here, by combining the target-induced polymerization nicking reaction (TIPNR) with the loop-mediated isothermal amplification (LAMP), we describe an ultrasensitive and label-free aptamer-based sensing method for detecting low levels of proteins in human serum by using thrombin as the model target analyte. The target thrombin binds and causes spontaneous assembly of two distinct aptamer probes to form the templates for the polymerization nicking reaction recycling amplification to produce many forward inner primer sequences. Subsequently, downstream LAMP reactions are initiated by these sequences for the generation of tremendous DNA hairpins with various lengths via automated cyclic strand displacement reactions. The SYBR Green I organic dye further binds the many hairpins to show drastically amplified fluorescence for ultrasensitive detection of thrombin down to 3.6 fM in the linear range from 0.01 pM to 10 nM. Such a sensing method based on aptamers has high discrimination capability for the target molecules against other non-specific proteins and is applicable for diluted serum samples. With the successful demonstration of the substantial signal amplification ability and simplicity feature of this assay approach, highly sensitive and convenient detection of other disease biomarkers with this method can be envisioned in the near future.

Fluorescent-Magnetic-Catalytic Nanospheres for Dual-Modality Detection of H9N2 Avian Influenza Virus

The outbreak of H9N2 avian influenza virus (H9N2 AIV) brings high mortality and huge economic losses every year. Sensitive and reliable detection methods are essential to timely diagnosis and treatment. Herein, a dual-modality immunoassay is proposed for H9N2 AIV detection by employing fluorescent-magnetic-catalytic nanospheres (FMCNs) as labels and alkaline phosphatase (ALP)-induced metallization as a signal amplification strategy. The excellent magnetic properties of FMCNs endow the assay a potential application in complex samples. Also, the excellent fluorescence properties of FMCNs enable fluorescence modality readout. The antibodies on the FMCN surface can achieve efficient capture and separation of targets. Amplified electrochemical modality readout can be obtained through ALP-catalyzed silver deposition. Dual-modality immunoassay combined the advantages of electrochemical assay with fluorescence assay and provides accurate detection results to meet different testing needs. With two quantitative analysis forms, H9N2 AIV can be detected by electrochemical signals with a quantitation range of 0.1 to 1000 ng/mL and a detection limit of 10 pg/mL. The linear range is 300 to 1000 ng/mL with a detection limit of 69.8 ng/mL by the fluorescence signal readout. Moreover, the specificity, anti-interference ability, accuracy, and diversity of the proposal have unlimited potential for early diagnosis of suspect infections.

Enrichment-Stowage-Cycle Strategy for Ultrasensitive Electrochemiluminescent Detection of HIV-DNA with Wide Dynamic Range

Sensitive detection of human immunodeficiency virus DNA (HIV-DNA) is essential for timely diagnosis and cure of the illness. Herein, a novel "enrichment-stowage-cycle" strategy was proposed to fabricate a multiple amplified electrochemiluminecence (ECL) biosensor for HIV-DNA detection. On the basis of the enrichment role of magnetic nanobeads, assembly role of copolymer nanospheres and strand displacement amplification (SDA), the processes were named as "enrichment", "stowage", and "cycle", respectively. The method employed electrochemiluminescent nanospheres (ENs) as signal labels by assembling three layers of CdSe/ZnS quantum dots (QDs) onto the surface of copolymer nanospheres. Compared to QDs, the same concentration of ENs can the enhance the ECL intensity by about 11.3-fold. SDA could further amplify the signals by about 3.77-fold, possessing high sensitivity for low-abundant biomarkers detection. The integration of magnetic separation improved detection specificity and stability, making the method possible for practical application. On the basis of magnetic separation, ENs and SDA, the ECL biosensor realized ultrasensitive detection of 39.81 fM HIV-DNA, which was more sensitive than other HIV-DNA analytical methods, with a wide dynamic range of 0.05 pM to 50 nM. The successful detection of HIV-DNA in complex samples with good sensitivity and accuracy indicated its potential utilization in early judgment of diseases and fabrication of signal amplification platforms.

Integration of a 3D-printed read-out platform with a quantum dot-based immunoassay for detection of the avian influenza A (H7N9) virus

Outbreaks and potential epidemics of the highly pathogenic avian influenza virus pose serious threats to human health and the global economy. As such, its timely and accurate detection is critically important. In the present study, positive hybridoma cells (6B3) were obtained, which were used to secrete high-titer avian influenza virus (AIV) H7N9 monoclonal antibodies (H7N9 mAb). Based on these mAbs, quantum dot-based lateral flow immunochromatographic strips (QD-LFICS) were developed for AIV H7N9 detection. Under optimized conditions, results from a commercial fluorescent strip reader indicated that the limit of detection of QD-LFICS was 0.0268 HAU. To achieve rapid on-site testing, a mini 3D-printed read-out platform was fabricated to allow observation of QD-LFICS by the naked eye. More importantly, QD-LFICS were found to be practical and specific for the detection of actual samples compared with a real-time polymerase chain reaction.

Magnetic nanoparticles for smart electrochemical immunoassays: a review on recent developments

This review (with 129 refs) summarizes the progress in electrochemical immunoassays combined with magnetic particles that was made in the past 5 years. The specifity of antibodies linked to electrochemical transduction (by amperometry, voltammetry, impedimetry or electrochemiluminescence) gains further attractive features by introducing magnetic nanoparticles (MNPs). This enables fairly easy preconcentration of analytes, minimizes matrix effects, and introduces an appropriate label. Following an introduction into the fundamentals of electrochemical immunoassays and on nanomaterials for respective uses, a large chapter addresses method for magnetic capture and preconcentration of analytes. A next chapter discusses commonly used labels such as dots, enzymes, metal and metal oxide nanoparticles and combined clusters. The large field of hybrid nanomaterials for use in such immunoassays is discussed next, with a focus on MNPs composites with various kinds of graphene variants, polydopamine, noble metal nanoparticles or nanotubes. Typical applications address clinical markers (mainly blood and urine parameters), diagnosis of cancer (markers and cells), detection of pathogens (with subsections on viruses and bacteria), and environmental and food contaminants as toxic agents and pesticides. A concluding section summarizes the present status, current challenges, and highlights future trends. Graphical abstract Magnetic nanoparticles (MNP) with antibodies (Ab) capture and preconcentrate analyte from sample (a) and afterwards become magnetically (b) or immunospecifically (c) bound at an electrode. Signal either increases due to the presence of alabel (b) or decreases as the redox probe is blocked (c).

Digital Single Virus Immunoassay for Ultrasensitive Multiplex Avian Influenza Virus Detection Based on Fluorescent Magnetic Multifunctional Nanospheres

The fluorescence method has made great progress in the construction of sensitive sensors but the background fluorescence of the matrix and photobleaching limit its broad application in clinical diagnosis. Here, we propose a digital single virus immunoassay for multiplex virus detection by using fluorescent magnetic multifunctional nanospheres as both capture carriers and signal labels. The superparamagnetism and strong magnetic response ability of nanospheres can realize efficient capture and separation of targets without sample pretreatment. Due to their distinguishable fluorescence imaging and photostability, the nanospheres enable single-particle counting for ultrasensitive multiplexed detection. Furthermore, the integration of digital analysis provided a reliable quantitative strategy for the detection of rare targets. Based on multifunctional nanospheres and digital analysis, a digital single virus immunoassay was proposed for simultaneous detection of H9N2, H1N1, and H7N9 avian influenza virus without complex signal amplification, whose detection limits were 0.02 pg/mL. Owing to its good specificity and anti-interference ability, the method showed great potential in single biomolecules, multiplexed detection, and early diagnosis of diseases.

Laser-Cut Polymer Tape Templates for Scalable Filtration Fabrication of User-Designed and Carbon-Nanomaterial-Based Electrochemical Sensors

We report here a simple filtration method for the scalable fabrication of user-designed and carbon-nanomaterial-based electrode arrays using laser-cut poly(vinyl chloride) (PVC) tape templates. This method can produce electrode arrays with high uniformity and low resistance from the dilute dispersions of single-walled carbon nanotubes (SWNTs) and graphene nanoplatelets (GNPs). For these two carbon arrays, the SWNT array is demonstrated to possess several interesting properties, e.g., good mechanical properties, excellent flexibility, and favorable electrochemical behavior. Moreover, its porous structure enables the construction of a paperlike solid-state electrochemical sensor using Nafion electrolytes, which is suitable for the on-site monitoring of trace phenol pollutants in electrolyte-free water. Besides, an electrochemically addressable 36-zone sensor was constructed by this method. With the aid of an inexpensive 3D printer, the addressable sensor can achieve the semiautomatic and high-throughput evaluation of antioxidant capacity on a series of vegetables and fruits using a single-channel electrochemical analyzer.