Programmable Modulation of Copper Nanoclusters Electrochemiluminescence via DNA Nanocranes for Ultrasensitive Detection of microRNA

Aptamer responsive DNA Functionalized hydrogels electrochemiluminescence biosensor for the detection of adenosine triphosphate

DNA hydrogel represents a noteworthy biomaterial. The preparation of biosensors by combining DNA hydrogel with electrochemiluminescence can simplify the modification process and raise the experimental efficiency. In this study, an electrochemiluminescence (ECL) biosensor based on DNA hydrogel was fabricated to detect adenosine triphosphate (ATP) simply and quickly. CdTe-Ru@SiO2 nanospheres capable of ECL resonance energy transfer (RET) were synthesized and encapsulated CdTe-Ru@SiO2 in the DNA hydrogel to provide strong and stable ECL signals. DNA hydrogel avoided the labeling of ECL signal molecules. The aptamer of ATP as the linker of the hydrogel for the specificity of ATP detection. The cross-linked structure of the aptamer and the polymer chains was opened by ATP, and then the decomposition of the DNA hydrogel initiated the escape of CdTe-Ru@SiO2 to generate an ECL signal. The designed biosensor detected ATP without too much modification and complex experimental steps on the electrode surface, with good specificity and stability, and a wide linear range. The detection range was 10-5000 nM, and the detection limit was 6.68 nM (S/N = 3). The combination of DNA hydrogel and ECL biosensor provided a new way for clinical detection of ATP and other biomolecule.

Cu superparticle-based aggregation induced enhancement strategy with PVDF-HFP/CeVO4 NP sensing interface for miR-103a detection

Aggregation-induced emission (AIE) has been widely used in research on electrochemiluminescence (ECL) due to its excellent luminescence intensity. In this work, copper superparticles (Cu SPs) were used to construct ECL biosensor to detect the microRNA-103a (miRNA-103a) in triple-negative breast cancer (TNBC) tumor tissues. Firstly, GSH-capped copper clusters were used as precursors to prepare Cu SPs by the AIE effect. Compared with clusters, Cu SPs possessed higher luminescence performance and energy stability, making them an ideal choice for ECL nanoprobe. The film of PVDF-HFP/CeVO4 NPs was constructed and modified with CPBA and GSH as the sensing interface (PCCG). The PCCG film displayed good conductivity and hydrophilicity, and desirable mechanical stability. Moreover, the PCCG film can induce high carrier mobility rates and dissociate large amounts of the co-reactant K2S2O8 to enhance the ECL intensity of Cu SPs. As a result, the prepared ECL sensor with the catalyzed hairpin assembly (CHA) strategy was employed to quantify miRNA-103a in the range of 100 fM to 100 nM. The biosensor provided a novel analytical approach for the clinical diagnosis of TNBC.

Sensing, Imaging, and Therapeutic Strategies Endowing by Conjugate Polymers for Precision Medicine

Conjugated polymers (CPs) have promising applications in biomedical fields, such as disease monitoring, real-time imaging diagnosis, and disease treatment. As a promising luminescent material with tunable emission, high brightness and excellent stability, CPs are widely used as fluorescent probes in biological detection and imaging. Rational molecular design and structural optimization have broadened absorption/emission range of CPs, which are more conductive for disease diagnosis and precision therapy. This review provides a comprehensive overview of recent advances in the application of CPs, aiming to elucidate their structural and functional relationships. The fluorescence properties of CPs and the mechanism of detection signal amplification are first discussed, followed by an elucidation of their emerging applications in biological detection. Subsequently, CPs-based imaging systems and therapeutic strategies are illustrated systematically. Finally, recent advancements in utilizing CPs as electroactive materials for bioelectronic devices are also investigated. Moreover, the challenges and outlooks of CPs for precision medicine are discussed. Through this systematic review, it is hoped to highlight the frontier progress of CPs and promote new breakthroughs in fundamental research and clinical transformation.

Breaking boundaries: Artificial intelligence for pesticide detection and eco-friendly degradation

Pesticides are extensively used agrochemicals across the world to control pest populations. However, irrational application of pesticides leads to contamination of various components of the environment, like air, soil, water, and vegetation, all of which build up significant levels of pesticide residues. Further, these environmental contaminants fuel objectionable human toxicity and impose a greater risk to the ecosystem. Therefore, search of methodologies having potential to detect and degrade pesticides in different environmental media is currently receiving profound global attention. Beyond the conventional approaches, Artificial Intelligence (AI) coupled with machine learning and artificial neural networks are rapidly growing branches of science that enable quick data analysis and precise detection of pesticides in various environmental components. Interestingly, nanoparticle (NP)-mediated detection and degradation of pesticides could be linked to AI algorithms to achieve superior performance. NP-based sensors stand out for their operational simplicity as well as their high sensitivity and low detection limits when compared to conventional, time-consuming spectrophotometric assays. NPs coated with fluorophores or conjugated with antibody or enzyme-anchored sensors can be used through Surface-Enhanced Raman Spectrometry, fluorescence, or chemiluminescence methodologies for selective and more precise detection of pesticides. Moreover, NPs assist in the photocatalytic breakdown of various organic and inorganic pesticides. Here, AI models are ideal means to identify, classify, characterize, and even predict the data of pesticides obtained through NP sensors. The present study aims to discuss the environmental contamination and negative impacts of pesticides on the ecosystem. The article also elaborates the AI and NP-assisted approaches for detecting and degrading a wide range of pesticide residues in various environmental and agrecultural sources including fruits and vegetables. Finally, the prevailing limitations and future goals of AI-NP-assisted techniques have also been dissected.

Ligand-induced Assembly of Copper Nanoclusters with Enhanced Electrochemical Excitation and Radiative Transition for Electrochemiluminescence

Copper nanoclusters (CuNCs) are emerging electrochemiluminescence (ECL) emitters with unique molecule-like electronic structures, high abundance, and low cost. However, the synthesis of CuNCs with high ECL efficiency and stability in a scalable manner remains challenging. Here, we report a facile gram-scale approach for preparing self-assembled CuNCs (CuNCsAssy ) induced by ligands with exceptionally boosted anodic ECL and stability. Compared to the disordered aggregates that are inactive in ECL, the CuNCsAssy shows a record anodic ECL efficiency for CuNCs (10 %, wavelength-corrected, relative to Ru(bpy)3 Cl2 /tripropylamine). Mechanism studies revealed the unusual dual functions of ligands in simultaneously facilitating electrochemical excitation and radiative transition. Moreover, the assembly addressed the limitation of poor stability of conventional CuNCs. As a proof of concept, an ECL biosensor for alkaline phosphatase detection was successfully constructed with an ultralow limit of detection of 8.1×10-6  U/L.

Highly stable Ru-complex-based metal-covalent organic frameworks as novel type of electrochemiluminescence emitters for ultrasensitive biosensing

Developing novel types of high-performance electrochemiluminescence (ECL) emitters is of great significance for constructing ultrasensitive ECL sensors. Herein, a highly stable metal-covalent organic framework (MCOF), termed Ru-MCOF, has been devised and synthesized by employing a classic ECL luminophore, tris(4,4'-dicarboxylicacid-2,2'-bipyridyl)ruthenium(II) (Ru(dcbpy)₃²⁺), as building unit and applied as a novel ECL probe to construct an ultrasensitive ECL sensor for the first time. Impressively, the topologically ordered and porous architectures of the Ru-MCOF not only allow Ru(bpy)₃²⁺ units to precisely locate and homogeneously distribute in the skeleton via strong covalent bonds but also facilitate the transport of co-reactants and electrons/ions in channels to promote the electrochemical activation of both external and internal Ru(bpy)₃²⁺ units. All these features endow the Ru-MCOF with excellent ECL emission, high ECL efficiency, and outstanding chemical stability. As expected, the constructed ECL biosensor based on the Ru-MCOF as a high-efficiency ECL probe accomplishes the ultrasensitive detection of microRNA-155. Overall, the synthesized Ru-MCOF not only enriches the MCOF family but also displays excellent ECL performance and thus expands the application of MCOFs in bioassays. Considering the structural diversity and tailorability of MCOFs, this work opens a new horizon to design and synthesize high-performance ECL emitters, therefore paving a new way to develop highly stable and ultrasensitive ECL sensors and motivating further research on MCOFs.

Aggregation-Induced Electrochemiluminescence of Copper Nanoclusters by Regulating Valence State Ratio of Cu(I)/Cu(0) for Ultrasensitive Detection of MicroRNA

In this work, Cu nanoclusters (Cu NCs) with strong aggregation-induced electrochemiluminescence (AIECL) as emitters were used to construct an ECL biosensor for ultrasensitive detection of microRNA-141 (miR-141). Impressively, the ECL signals enhanced with the increased content of Cu(I) in the aggregative Cu NCs. When the ratio of Cu(I)/Cu(0) in aggregative Cu NCs was 3.2, Cu NCs aggregates showed the highest ECL intensity, in which Cu(I) could enhance the cuprophilic Cu(I)···Cu(I) interaction to form rod-shaped aggregates for restricting nonradiative transitions to obviously improve the ECL response. As a result, the ECL intensity of the aggregative Cu NCs was 3.5 times higher than that of the monodispersed Cu NCs. With the aid of the cascade strand displacement amplification (SDA) strategy, an outstanding ECL biosensor was developed to achieve the ultrasensitive detection of miR-141, whose linear range varied from 10 aM to 1 nM with a detection limit of 1.2 aM. This approach opened an avenue to prepare non-noble metal nanomaterials as robust ECL emitters and provided a new idea for detection of biomolecules for diagnosis of disease.

CRISPR-Cas system manipulating nanoparticles signal transduction for cancer diagnosis

Early diagnosis of cancer is important to improve the survival rate and relieve patient pain. Sensitive detection of cancer related biomarkers in body fluids is a critical approach for the early diagnosis of cancer. The clustered regularly interspaced short palindromic repeat-associated protein (CRISPR-Cas) system has emerged as a molecular manipulation technology because of its simple detection procedure, high base resolution, and isothermal signal amplification. Recently, various nanomaterials with unique optical and electrical characteristics have been introduced as the novel signal transducers to enhance the detection performance of CRISPR-Cas-based nanosensors. This review summarizes the working mechanisms of the CRISPR-Cas system for biosensing. It also enumerates the strategies of CRISPR-manipulated nanosensors based on various signal models for cancer diagnosis, including colorimetric, fluorescence, electrochemical, electrochemiluminescence, pressure, and other signals. Finally, the prospects and challenges of CRISPR-Cas-based nanosensors for cancer diagnostic are also discussed. This article is categorized under: Diagnostic Tools > Biosensing.

Electrochemiluminescence nanoemitters for immunoassay of protein biomarkers

The family of electrochemiluminescent luminophores has witnessed quick development since the electrochemiluminescence (ECL) phenomenon of silicon nanoparticles was first reported in 2002. Moreover, these developed ECL nanoemitters have extensively been applied in sensitive detection of protein biomarker by combining with immunological recognition. This review firstly summarized the origin and development of various ECL nanoemitters including inorganic and organic nanomaterials, with an emphasis on metal-organic frameworks (MOFs)-based ECL nanoemitters. Several effective strategies to amplify the ECL response of nanoemitters and improve the sensitivity of immunosensing were discussed. The application of ECL nanoemitters in immunoassay of protein biomarkers for diagnosis of cancers and other diseases, especially lung cancer and heart diseases, was comprehensively presented. The recent development of ECL imaging with the nanoemitters as ECL tags for detection of multiplex protein biomarkers on single cell membrane also attracted attention. Finally, the future opportunities and challenges in the ECL biosensing field were highlighted.

Ratiometric Electrochemiluminescence Sensing of Carcinoembryonic Antigen Based on Luminol

Ratiometric electrochemiluminescence (ECL) sensors can efficiently remove environmental interference to attain precise detection. Nonetheless, two eligible luminophores or coreactants were usually needed, increasing the complexity and restricting their practical application. In this study, a single luminophore of luminol with a single coreactant of H₂O₂ was employed to construct a dual-potential ratiometric ECL sensor for the detection of carcinoembryonic antigen (CEA). The produced palladium nanoclusters (Pd NCs) employing a DNA duplex as a template could not only stimulate luminol to produce cathodic ECL (I_cathodic) but also quench its anodic ECL (I_anodic). During the detection process, CEA could damage the double-stranded structure and reduce the Pd NCs' amount, triggering a significant decrease in the ratio of I_cathodic to I_anodic (I_cathodic/I_anodic) and thereby achieving sensitive CEA's detection. Furthermore, the I_cathodic/I_anodic was independent of the H₂O₂ concentration, which avoided a prejudicial effect from H₂O₂ decomposition and considerably enhanced the detection's reliability. The developed ratiometric ECL sensor demonstrated a sensitive detection toward CEA with a wide linear range from 100 ag/mL to 10 ng/mL and a detection limit of 87.1 ag/mL (S/N = 3). In conclusion, this study offers a new idea for constructing ratiometric ECL sensors based on a single luminophore and technical support for cancer's early diagnosis.

A waste-free entropy-driven DNA nanomachine for smartly designed photoelectrochemical biosensing of MicroRNA-155

DNA nanotechnology has been booming in many fields such as biosensors, logic gates, and material science. Typically, as a kind of powerful isothermal and enzyme-free DNA amplifier in biosensors, entropy-driven DNA nanomachines are superior to hairpin-based ones in speed, specificity, stability, and simplicity. However, the atomic economy of non-covalent molecular reactions in these machines is not high, and DNAs waste is typically generated during operation. Herein, in order to further save costs and improve the performance, we report a novel design for a smart photoelectrochemical (PEC) biosensor of microRNA-155 by engineering waste-free entropy-driven DNA amplifiers conjugated to superparamagnetic Fe₃O₄@SiO₂ particles. This elegant design efficiently avoids leaving redundant DNA strands and waste complex in the amplification system, and all the displaced DNA strands can be regenerated into double-stranded structures, making the reaction irreversible. Thanks to superparamagnetic Fe₃O₄@SiO₂ particles, this strategy is achieved by effectively enriching, extracting, and cleaning target analogs to prevent co-existing species from remaining on the modified electrode surface, enabling a highly specific and sensitive PEC biosensor. This innovative study will be a new perspective on microRNAs detection in complex biological systems, paving the way for the design of waste-free DNA molecular machines and promoting the development of DNA nanotechnology.

Recent progress of metal nanoclusters in electrochemiluminescence

Metal nanoclusters (MeNCs), composed of a few to hundreds of metal atoms and appropriate surface ligands, have attracted extensive interest in the electrochemiluminescence (ECL) realm owing to their molecule-like optical, electronic, and physicochemical attributes and are strongly anticipated for discrete energy levels, fascinating electrocatalytic activity, and good biocompatibility. Over the past decade, huge efforts have been devoted to the synthesis, properties, and application research of ECL-related MeNCs, and this field is still a subject of heightened concern. Therefore, this perspective aims to provide a comprehensive overview of the recent advances of MeNCs in the ECL domain, mainly covering the emerged ECL available MeNCs, unique chemical and optical properties, and the general ECL mechanisms. Synthesis strategies for desirable ECL performance are further highlighted, and the resulting ECL sensing applications utilizing MeNCs as luminophores, quenchers, and substrates are discussed systematically. Finally, we anticipate the future prospects and challenges in the development of this area.

DNAzyme signal amplification based on Au@Ag core-shell nanorods for highly sensitive SERS sensing miRNA-21

Here, we developed a surface-enhanced Raman scattering (SERS) sensor based on functionalized Au@Ag core-shell nanorods (Au@Ag NRs) and cascade DNAzyme amplifier (CSA) for sensitive and accurate determination of microRNA-21 (miRNA-21). The as-prepared SERS nanoprobes were composed of a thiol-modification hairpin probe (HP2)-functionalized Au@Ag NRs and hairpin DNAzyme (HP1-Dz). Compared with original gold nanorods, the silver shell caused an enhancement of plasmonic properties, resulting in a significant enhancement of Raman signals. In the presence of target miRNAs, the hairpin construction of HP1-Dz changed due to DNA/RNA hybridization; subsequently, the DNAzyme-catalyzed cleaving process changed, and the Raman signals of the SERS nanoprobes gradually "turned off" with time elapse because of the dissociation of the Raman reporter from the surface of Au@Ag NRs. Hence, based on this principle, the proposed SERS sensor exhibited good linearity in the range 0.5 fM to 10 nM for miRNA-21 detection with a detection limit (LOD) of 0.5 fM. The proposed SERS platform has potential application in quantitative and precise detection of miRNA-21 in human serum.

Near-Infrared Electrogenerated Chemiluminescence from Simple Copper Nanoclusters for Sensitive Alpha-Fetoprotein Sensing

Exploiting low cost, water-soluble, and near-infrared (NIR) emissive electrochemiluminophores (ECLphores) is significantly important for biological applications. In this study, bright and NIR electrogenerated chemiluminescence (ECL) emissive copper nanoclusters (Cu NCs) were synthesized through a facile one-pot wet chemical reduction method. ECL properties of obtained Cu NCs were examined in the presence of potassium persulfate, resulting in maximum intensity at 735 nm, at least 135 nm red-shifted with respect to all other Cu NCs. Electrochemistry, photoluminescence (PL), and spooling ECL spectroscopies were used to track NIR ECL emission of Cu NCs ascribed to the monomeric excited states. Due to the abundant binding sites of bovine serum albumin (BSA) to anchor target biomolecules, a sandwich-type ECL immunosensor was thus fabricated using such BSA-templated Cu NCs as tags and alpha fetoprotein antigen (AFP) as a model protein for the first time. Without assisting any signal amplification strategies, the proposed NIR ECL biosensor exhibited a wide linear range (1-400 ng mL^-1) and low detection limit (0.02 ng mL^-1) as well as superior selectivity and reproducibility and was successfully applied in real human serum sample determination. This work sets the stage for the development of novel non-noble metal nanoclusters for large-scale and emerging nanotechnology applications.

Multiplex DNA Walking Machines for Lung Cancer-Associated miRNAs

Biomimetic DNA walking machines have gained great success in scrutinizing the microscopic world and sensitive biosensing of disease biomarkers. Despite superb achievements, the research on DNA walking machines for simultaneous detection of multiple analytes is still rare, while the design and realization of multiplexing are considered as an important bottleneck. The multiplex detection of biomarkers can not only improve the specificity of bioassays but also avoid the squander of valuable biological specimens. Herein, we reported multiplex three-dimensional (3D) DNA walking machines based on high-resolution inductively coupled plasma mass spectrometry (HR-ICPMS) for lung cancer-associated miRNA detection. In the presence of lung cancer-associated target miRNAs (miR-21, miR-141, and miR-125b), DNA walking machines were stimulated and operated to liberate a large number of lanthanide elements (Tb, Ho, and Tm), and then the signals were collected simultaneously by HR-ICPMS. The recovery test of target miRNAs in human serum and the simultaneous monitoring experiment of three miRNAs in human lung cancer cell line (A549) and normal cell line (HBE) specimens display satisfactory analysis capabilities for complex biological samples. Thanks to the vast potential of lanthanide tags and the modular design, the proposed bioassay might flexibly detect different miRNA combinations with corresponding sets of DNA walking machines to meet the requirements of various tasks.

Sensitive Aptamer SERS and RRS Assays for Trace Oxytetracycline Based on the Catalytic Amplification of CuNCs

A new method for the determination of oxytetracycline (OTC) has been established by coupling the catalytic amplification reaction of copper nanoclusters (CuNCs) with the aptamer reaction. CuNCs prepared by a wet chemical method have the catalytic activity for the formation of gold nanoparticles (AuNPs) resulting from a HAuCl₄-ethanol (En) reaction. The experimental results showed that OTC aptamer (Apt) can be adsorbed on the surface of CuNCs in a non-specific way, thus inhibiting its catalytic activity. When OTC was added to the solution, the OTC-Apt complex was generated by a specific reaction, which made the CuNCs desorb and restore their catalytic activity. With the increase of OTC, the recovery of the catalytic activity of CuNCs is strengthened, the reaction speed is accelerated, and the number of AuNPs is increased. The generated AuNPs exhibited surface enhanced Raman scattering (SERS) signals at 1615 cm⁻¹ in the presence of Vitoria blue 4R (VB4R) molecular probes, and a resonance Rayleigh scattering (RRS) peak at 586 nm. There is a good linear relationship between the intensities of SERS, or RRS, and OTC concentration at the range of 37.5–300 ng/L or 37.5–225 ng/L, respectively. A new SERS and RRS assay for the determination of trace OTC based on the regulation of CuNCs catalysis was established.

Ultrasensitive ratiometric electrochemiluminescence for detecting atxA mRNA using luminol-encapsulated liposome as effectively amplified signal labels

It is an advantageous way to quickly identify the toxicity of Bacillus anthracis (B. anthracis) by detecting the transcription product of the atxA gene. Herein, a novel ultrasensitive ratiometric electrochemiluminescence (ECL) biosensor with competitive mechanism and double amplified signal ways was proposed for detecting the atxA mRNA. The K2S2O8 was used as cathodic emitter and silver metal-organic gels (AgMOG) was used as ECL enhancer. The AgMOG could accelerate the electro-catalytic reduction of S2O82- to SO4˙-, which reacted with dissolved oxygen, resulting in strong cathodic ECL. Meanwhile, luminol was encapsulated in liposome as anodic amplified signal labels and the luminol anion radical also reacted with dissolved oxygen to create the anodic ECL emission. We immobilized luminol-encapsulated liposomes on the surface of AgMOG through the hybridization of DNA and mRNA. This would provide a competitive mechanism involving dissolved oxygen between K2S2O8 and luminol. Benefiting from the competitive mechanism and amplified signal ways, this ratiometric biosensor achieved a wide linear relationship range from 10 to 300 fM with a low limit of detection (8.13 fM). Considering the accessible operation, favorable performance, and high universality of this strategy, this work may be used to analyze other mRNAs of bacteria.

Nanotechnology in emerging liquid biopsy applications

Liquid biopsy is considered as the most attractive alternative to traditional tissue biopsies. The major advantages of this approach lie in the non-invasive procedure, the rapidness of sample collection and the potential for early cancer diagnosis and real-time monitoring of the disease and the treatment response. Nanotechnology has dynamically emerged in a wide range of applications in the field of liquid biopsy. The benefits of using nanomaterials for biosensing include high sensitivity and detectability, simplicity in many cases, rapid analysis, the low cost of the analysis and the potential for portability and personalized medicine. The present paper reports on the nanomaterial-based methods and biosensors that have been developed for liquid biopsy applications. Most of the nanomaterials used exhibit great analytical performance; moreover, extremely low limits of detection have been achieved for all studied targets. This review will provide scientists with a comprehensive overview of all the nanomaterials and techniques that have been developed for liquid biopsy applications. A comparison of the developed methods in terms of detectability, dynamic range, time-length of the analysis and multiplicity, is also provided.

Synergistic integration of metal nanoclusters and biomolecules as hybrid systems for therapeutic applications

Therapeutic nanoparticles are designed to enhance efficacy, real-time monitoring, targeting accuracy, biocompatibility, biodegradability, safety, and the synergy of diagnosis and treatment of diseases by leveraging the unique physicochemical and biological properties of well-developed bio-nanomaterials. Recently, bio-inspired metal nanoclusters (NCs) consisting of several to roughly dozens of atoms (<2 nm) have attracted increasing research interest, owing to their ultrafine size, tunable fluorescent capability, good biocompatibility, variable metallic composition, and extensive surface bio-functionalization. Hybrid core-shell nanostructures that effectively incorporate unique fluorescent inorganic moieties with various biomolecules, such as proteins (enzymes, antigens, and antibodies), DNA, and specific cells, create fluorescently visualized molecular nanoparticle. The resultant nanoparticles possess combinatorial properties and synergistic efficacy, such as simplicity, active bio-responsiveness, improved applicability, and low cost, for combination therapy, such as accurate targeting, bioimaging, and enhanced therapeutic and biocatalytic effects. In contrast to larger nanoparticles, bio-inspired metal NCs allow rapid renal clearance and better pharmacokinetics in biological systems. Notably, advances in nanoscience, interfacial chemistry, and biotechnologies have further spurred researchers to explore bio-inspired metal NCs for therapeutic purposes. The current review presents a comprehensive and timely overview of various metal NCs for various therapeutic applications, with a special emphasis on the design rationale behind the use of biomolecules/cells as the main scaffolds. In the different hybrid platform, we summarize the current challenges and emerging perspectives, which are expected to offer in-depth insight into the rational design of bio-inspired metal NCs for personalized treatment and clinical translation.

Copper nanoclusters: designed synthesis, structural diversity, and multiplatform applications

Atomically precise metal nanoclusters (MNCs) have gained tremendous research interest in recent years due to their extraordinary properties. The molecular-like properties that originate from the quantized electronic states provide novel opportunities for the construction of unique nanomaterials possessing rich molecular-like absorption, luminescence, and magnetic properties. The field of monolayer-protected metal nanoclusters, especially copper, with well-defined molecular structures and compositions, is relatively new, about two to three decades old. Nevertheless, the massive progress in the field illustrates the importance of such nanoobjects as promising materials for various applications. In this respect, nanocluster-based catalysts have become very popular, showing high efficiencies and activities for the catalytic conversion of chemical compounds. Biomedical applications of clusters are an active research field aimed at finding better fluorescent contrast agents, therapeutic pharmaceuticals for the treatment and prevention of diseases, the early diagnosis of cancers and other potent diseases, especially at early stages. A huge library of structures and the compositions of copper nanoclusters (CuNCs) with atomic precisions have already been discovered during last few decades; however, there are many concerns to be addressed and questions to be answered. Hopefully, in future, with the combined efforts of material scientists, inorganic chemists, and computational scientists, a thorough understanding of the unique molecular-like properties of metal nanoclusters will be achieved. This, on the other hand, will allow the interdisciplinary researchers to design novel catalysts, biosensors, or therapeutic agents using highly structured, atomically precise, and stable CuNCs. Thus, we hope this review will guide the reader through the field of CuNCs, while discussing the main achievements and improvements, along with challenges and drawbacks that one needs to face and overcome.

Progress in electrochemiluminescence of nanoclusters: how to improve the quantum yield of nanoclusters

Classification of nanoclusters and methods to improve their quantum yield and applications.

Recent Advances in Electrochemiluminescence and Chemiluminescence of Metal Nanoclusters

Metal nanoclusters (NCs), including Au, Ag, Cu, Pt, Ni and alloy NCs, have become more and more popular sensor probes with good solubility, biocompatibility, size-dependent luminescence and catalysis. The development of electrochemiluminescent (ECL) and chemiluminescent (CL) analytical methods based on various metal NCs have become research hotspots. To improve ECL and CL performances, many strategies are proposed, from metal core to ligand, from intermolecular electron transfer to intramolecular electron transfer. Combined with a variety of amplification technology, i.e., nanostructure-based enhancement and biological signal amplification, highly sensitive ECL and CL analytical methods are developed. We have summarized the research progresses since 2016. Also, we discuss the current challenges and perspectives on the development of this area.

DNA nanotechnology approaches for microRNA detection and diagnosis

MicroRNAs are involved in the crucial processes of development and diseases and have emerged as a new class of biomarkers. The field of DNA nanotechnology has shown great promise in the creation of novel microRNA biosensors that have utility in lab-based biosensing and potential for disease diagnostics. In this Survey and Summary, we explore and review DNA nanotechnology approaches for microRNA detection, surveying the literature for microRNA detection in three main areas of DNA nanostructures: DNA tetrahedra, DNA origami, and DNA devices and motifs. We take a critical look at the reviewed approaches, advantages and disadvantages of these methods in general, and a critical comparison of specific approaches. We conclude with a brief outlook on the future of DNA nanotechnology in biosensing for microRNA and beyond.

Dual amplification ratiometric biosensor based on a DNA tetrahedron nanostructure and hybridization chain reaction for the ultrasensitive detection of microRNA-133a

A novel ratiometric electrochemiluminescence (ECL)-electrochemical (EC) hybrid biosensor with a high accuracy and reproducibility was fabricated for the ultrasensitive detection of miRNA-133a. With the help of a DNA tetrahedron nanostructure and hybridization chain reaction dual amplification strategy, the detection limit of 12.17 aM for miRNA-133a was obtained.

Highly ordered 3D electrochemical DNA biosensor based on dual orientation controlled rolling motor and graftable tetrahedron DNA

Herein, a robust and highly ordered three-dimensional electrochemical DNA (3D E-DNA) biosensor was proposed, and its orientation was controlled from top down by poly adenine oligonucleotides (polyA-ODNs)-mediated rolling motor (PRM) and graftable tetrahedron DNA (GTD). The GTD with a grafting domain was immobilized on the electrode surface to construct a well-organized sensing interface and controlled the orientation and distribution of the whole system at the "bottom" of this biosensor. The polyA-ODNs regulated the direction and density of the leg DNA attached on PRM at the "top" of the biosensor. The motion was achieved through the target induced cyclic cleaving, which triggered the motor rolling rather than walk. Impressively, the duplex strand DNA (dsDNA) formed after grafting, as a girder, provided a stable support to the soft long single strand (ssDNA), which facilitated the formation of the catalytic center, elevated the efficiency of the rolling cleavage. Under the optimal conditions, the designed biosensor exhibited a lower limit of 0.17 nM and wide linear range from 0.5 nM to 1.5 μM for adenosine rapid detection. Unique dual orientation regulated characteristics of the system increased the probability hybridization enormously and improved the motion efficiency significantly, which offered new avenue of DNA nanomachines development in biosensor platform.

Coreactant-Free Dual Amplified Electrochemiluminescent Biosensor Based on Conjugated Polymer Dots for the Ultrasensitive Detection of MicroRNA

Generally, electrochemiluminescence (ECL) assays are performed in the presence of a coreactant. The addition of the coreactant in the detection solution would make the ECL system lack sufficient stability. In the case of dissolved oxygen as the coreactant, the unknown concentration of dissolved O₂ would result in an inevitable error and a lack of reproducibility in detection. A coreactant-free ECL assay could overcome the above shortcomings and thus is an ideal choice. In this work, a coreactant-free dual amplified ECL strategy was constructed for ultrasensitive detection of microRNA (miRNA). Here, target-catalyzed hairpin assembly and enzyme-triggered DNA walker recycling amplification were integrated to achieve dual signal amplification. Carboxyl-functionalized poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(1,4-benzo-{2,1'-3}-thiadiazole)] (PFBT-COOH) dots were used as luminophores, which displayed prominent ECL performance without adding any coreactants and removing the dissolved O₂. As a result, the detection of miRNA was achieved, and the linear range was from 10 aM to 5 pM, and the detection limit was low to 3.3 aM. Meanwhile, the practicability of our biosensor was investigated by analyzing the expression of miRNA in cell lysates. The PFBT-COOH dots provided a great platform for constructing coreactant-free ECL biosensors and expanded the application of conjugated polymer dots in clinical analysis.

Advances in DNA/RNA detection using nanotechnology

Specific nucleic acid detection in vitro or in vivo has become increasingly important in the discovery of genetic diseases, diagnosing pathogen infection and monitoring disease treatment. One challenge, however, is that the amount of target nucleic acid in specimens is limited. Furthermore, direct sensing methods are also unable to provide sufficient sensitivity and specificity. Fortunately, due to advances in nanotechnology and nanomaterials, nanotechnology-based bioassays have emerged as powerful and promising approaches providing ultra-high sensitivity and specificity in nucleic acid detection. This chapter presents an overview of strategies used in the development and integration of nanotechnology for nucleic acid detection, including optical and electrical detection methods, and nucleic acid assistant recycling amplification strategies. Recent 5 years representative examples are reviewed to demonstrate the proof-of-concept with promising applications for DNA/RNA detection and the underlying mechanism for detection of DNA/RNA with the higher sensitivity and selectivity. Furthermore, a brief discussion of common unresolved issues and future trends in this field is provided both from fundamental and practical point of view.

Biomimetic Nanochannel-Ionchannel Hybrid for Ultrasensitive and Label-Free Detection of MicroRNA in Cells

A biomimetic nanochannel-ionchannel hybrid coupled with electrochemical detector was developed for label-free and ultrasensitive detection of microRNA (miRNA) in cells. Probe single stranded DNA (ssDNA) was first immobilized on the outer surface of the nanochannel-ionchannel hybrid membrane, which can hybridize with the target miRNA in cells. Due to the unique mass transfer property of the hybrid, the DNA-miRNA hybridization kinetics can be sensitively monitored in real-time using the electrochemical technique. More importantly, due to the super small size of the ionchannels, the DNA probe immobilization and hybridization process can be carried out on the outer surface of the ionchannel side, which can effectively avoid the blockage and damage of channels and thus considerably enhance the reproducibility and accuracy of the method. Using this strategy, the miRNA ranging from 0.1 fM to 0.1 μM can be facilely detected with a low detection limit of 15.4 aM, which is much lower than most reported work. The present strategy provides a sensitive and label-free miRNA detection platform, which will be of great significance in biomedical research and clinical diagnosis.

Recent advances in the synthesis and application of copper nanomaterials based on various DNA scaffolds

Fluorescent copper nanomaterials (CuNMs), including copper nanoparticles (CuNPs) and copper nanoclusters (CuNCs), become more and more popular with the abundant raw materials and low cost. A wide range of applications has been explored due to their fascinating properties such as low toxicity, remarkable water solubility, facile synthesis, large Stokes shifts, and good biocompatibility. As a kind of genetic material, DNA exhibits its molecular recognition function and diversity. The marriage between CuNMs and DNA endows DNA-templated CuNMs (DNA-CuNMs) with unique properties such as fluorescence, electrochemiluminescence and catalytic features. In this review, we summarize the synthesis and recent applications of DNA-CuNMs. Fluorescent CuNMs can be grown on various DNA scaffolds with special sequence design. T base plays an important role in the formation of CuNMs on DNA templates. These fluorescent DNA-CuNMs hold great prospect in logic gate construction, staining and biosensing of DNAs and RNAs, ions, proteins and enzymes, small molecules and so on.