Target-Induced Horseradish Peroxidase Deactivation for Multicolor Colorimetric Assay of Hydrogen Sulfide in Rat Brain Microdialysis

Multiplex fluorescence loop-mediated isothermal amplification with lateral flow assay for rapid simultaneous detection of mecA and nuc genes in methicillin-resistant Staphylococcus aureus

BACKGROUND

Antibiotic-resistant bacteria, such as methicillin-resistant Staphylococcus aureus (MRSA), pose a significant threat to public health. Existing detection methods, like cultivation-based techniques, demand significant time and labor, while molecular diagnostic techniques, such as PCR, necessitate sophisticated instrumentation and skilled personnel. Although previous multiplex loop-mediated isothermal amplification assays based on fluorescent dyes (mfLAMP) offer simplicity and cost-effectiveness, they are prone to false-positive results. Therefore, developing a rapid and efficient multiplex assay for high-sensitivity MRSA is imperative to create a practical diagnostic tool for point-of-care testing.

RESULTS

Here, we developed a mfLAMP combined with a lateral flow assay (mfLAMP-LFA) for the visual and simultaneous detection of the mecA (PBP2a-specific marker) and nuc (S. aureus-specific marker) genes in MRSA. We optimized mfLAMP-LFA using graphene oxide (GO)-based purification and specific DNA probes and evaluated its sensitivity, specificity, and stability. Utilizing GO to mitigate false-positive results by acting as a trap for free DNA probes, the mfLAMP-LFA method successfully identified mecAf and nucf-probes, exhibiting distinct red, green, and yellow fluorescence signals. The detection sensitivity of the developed mfLAMP-LFA method (1 CFU mL-1 in phosphate-buffered saline (PBS)) was comparable to other highly sensitive MRSA detection methods (1 CFU mL-1 in PBS). Furthermore, the method demonstrated specificity for MRSA, detecting it in irrigation water samples within the desired range and achieving reliable recovery rates from spiked samples.

SIGNIFICANCE

This novel strategy is the first to incorporate GO into mfLAMP-LFA, enabling specific and sensitive MRSA detection and advancing rapid bacterial detection. This assay facilitates MRSA diagnostics, contributing to improved public health and food safety by delivering rapid, cost-effective point-of-care results. It enables the simultaneous detection of multiple bacteria, even in irrigation water samples artificially inoculated with MRSA, which contain aerobic bacteria at 2.7 × 102 CFU mL-1.

Novel thiomaleimide-based fluorescent probe with aggregation-induced emission for detecting H2S

It has been well established that Hydrogen sulfide (H2S) is involved in various pathophysiological processes. Therefore, accurate monitoring H2S levels in vitro or vivo is of great significance in biological systems. Herein, we firstly developed a thiomaleimide-based compound MAL-1 bearing aggregation-induced emission characteristic for selective response toward H2S due to its nucleophilicity. The proposed sensor presented prominent sensitivity and selectivity with low detection limit of 75 nM and pseudo-first-order reaction rate constant of 9.65 × 10-2 s-1, as well as low cytotoxicity which works well in recognizing H2S in real samples and visualizing H2S in living cells. Thus, it could be concluded that the novel thiomaleimide-based probe would be a promising tool for assessing intracellular H2S levels.

Integrated gold nanorods-based dual-signal platform for accurate total antioxidant capacity assessment in food samples

Accurate assessment of Total Antioxidant Capacity (TAC) in food is crucial for evaluating nutritional quality and potential health benefits. This study aims to enhance the sensitivity and reliability of TAC detection through a dual-signal method, combining colorimetric and photothermal signals. Gold nanorods (AuNRs) were utilized to establish a dual-signal method duo to the colorimetric and photothermal properties. Fenton reaction can etch the AuNRs from the tips, as a result, a blue shift in the longitudinal LSPR absorption peak was obtained, leading to significant changes in color and photothermal effects, facilitating discrimination through both visual observation and thermometer measurements. In the presence of antioxidants, the Fenton reaction was suppressed or inhibited, protecting the AuNRs from etching. The colorimetric and photothermal signals were therefore positively correlated with TAC levels, enabling dual-signal detection of TAC. The linear range of AA was 4-100 μM in both colorimetry and photothermal modes, with detection limits of 1.60 μM and 1.38 μM, respectively. This dual-signal approach achieves low detection limits, enhancing precision and sensitivity. The method thus has the potential to act as a promising candidate for TAC detection in food samples, contributing to improved food quality and safety assessment.

One-Step Synthesis of Chitosan Hydrogel as Electrochemical Chemosensor for Hydrogen Sulfide Detection in Pregnancy-Induced Hypertension Syndrome Serum Sample

Oxidative stress caused by pregnancy-induced hypertension syndrome significantly affects the health of pregnant women. Hydrogen sulfide is a typical gaseous signal molecule against oxidative stress, and it is of profound significance to develop a detection method. In this study, a stimuli-responsive hydrogel was constructed based on the coordination and bonding principle of metal ions and chitosan (CS) to realize the quantitative detection of hydrogen sulfide (H2S). The chain of CS contains a large number of amino groups and hydroxyl groups, which can form the coordination structure with Cu2+, triggering CS to form a stable hydrogel. The hydrogel can be formed within about 5 s, which has the characteristics of rapid preparation. In the presence of target H2S, the cross-linking agent Cu2+ in the hydrogel can compete out, resulting in the collapse of the hydrogel and the release of the electrochemical probe. By detecting the concentration of the released electrochemical probe, the quantitative detection of H2S can be achieved. The prepared hydrogel has a good linear relationship with the concentration of H2S from 1 μM to 60 μm. At the same time, the hydrogel has good specificity and stability, and it can be applied to the detection of H2S in serum samples.

Colorimetric and photothermal dual-mode aptasensor with redox cycling amplification for the detection of ochratoxin A in corn samples

Ochratoxin A (OTA) detection is critical for public health safety. This study proposes a G-quadruplex-Hemin/iodide (G4-Hemin/I-)-mediated non-enzyme redox cycling amplification (RCA) system for dual-modal (colorimetric and photothermal thermometer) OTA analysis. The proposed aptasensor platform for point-of-care testing employs a common thermometer for quantitative signal readouts. The OTA aptamer folds into a G4 structure, which significantly enhances the catalytic activity in the presence of I- after RCA reaction. Moreover, a notable temperature enhancement causes color changes, providing an ultrasensitive and label-free platform for OTA detection. Further, the designed sensor was applied to OTA content determination in corn samples and achieved satisfactory results compared to a commercial enzyme-linked immunoassay kit. The proposed dual-mode aptasensor is simple, highly sensitive (1 pg/mL for colorimetric method, 0.8 pg/mL for photothermal method), selective, and suitable for low-cost instrument-free bioanalysis in low-resource settings.

Charge Density-Regulated Microchannel-Based Electrochemiluminescence Sensor for Hydrogen Sulfide Detection with a Highly Efficient Accumulation Strategy

The electrochemiluminescence (ECL) intensity can be regulated by ionic current passing through the microchannel, which broadened the regulation of the ECL sensors. But in the early reported sensors, the electrostatic repulsion and steric hindrance caused few targets to approach the interface of the microchannel driven by concentration difference, which reduced the detection efficiency and prolonged the detection period. In this study, different accumulation strategies, such as a positive electric field and different polarity electric fields, were designed to accumulate targets in the microchannel. The interaction of azide groups and hydrogen sulfide served as a research model. Hydrogen sulfide can react with the negatively charged azide groups in the microchannel surface to produce positively charged amino groups, decreasing the negative charge density of the microchannel and thus altering the ionic current and ECL intensity. The accumulation of hydrogen sulfide at the microchannel tip can increase the collision probability with azide groups to improve the detection efficiency, and the integration of accumulation and reaction can shorten the detection period to 28 min. The hydrogen sulfide concentration on the microchannel tip accumulated by applying different polarity electric fields was 22.3-fold higher than that accumulated by applying a positive electric field. The selected research model broadened the application range of a microchannel-based ECL sensor and confirmed the universality of the microchannel-based ECL sensor.

Photoelectrochemical Sensor for H2S Based on a Lead-Free Perovskite/Metal-Organic Framework Composite

Halide perovskites have emerged as a highly promising class of photoelectric materials. However, the application of lead-based perovskites has been hindered by their toxicity and relatively weak stability. In this work, a composite material comprising a lead-free perovskite cesium copper iodide (CsCu2I3) nanocrystal and a metal-organic framework (MOF-801) has been synthesized through an in situ growth approach. The resulting composite material, denoted as CsCu2I3/MOF-801, demonstrates outstanding stability and exceptional optoelectronic characteristics. MOF-801 may serve a dual role by acting as a protective barrier between CsCu2I3 nanocrystals and the external environment, as well as promoting the efficient transfer of photogenerated charge carriers, thereby mitigating their recombination. Consequently, CsCu2I3/MOF-801 demonstrates its utility by providing both stability and a notably high initial photocurrent. Leveraging the inherent reactivity between H2S and the composite material, which results in the formation of Cu2S and structural alteration, an exceptionally sensitive photoelectrochemical sensor for H2S detection has been designed. This sensor exhibits a linear detection range spanning from 0.005 to 100 μM with a remarkable detection limit of 1.67 nM, rendering it highly suitable for precise quantification of H2S in rat brains. This eco-friendly sensor significantly broadens the application horizon of perovskite materials and lays a robust foundation for their future commercialization.

Responsive luminescent silver-based metal-organic frameworks for highly sensitive and selective detection of hydrogen sulfide in biological system via a self-assembled headspace separation device

As a highly toxic gas pollutant and also an endogenous gaseous signaling molecule existing in a variety of physiological processes, the rapid and accurate in-field detection of hydrogen sulfide is of great concern. Nevertheless, two drawbacks as for the optical probes for H2S detection, taking about a long time to reach the optical signal balance or the low selectivity, always exist. Herein, by using a highly photoluminescent and H2S-stimuli responsive silver-based metal-organic frameworks (MOFs): Ag-BDC (BDC = 1, 4-benzene dicarboxylate), we demonstrated that the luminescence intensity of Ag-BDC MOFs was inversely proportional to the concentration of H2S due to the Ag-S coordination and the obstruction of ligand-to-metal charge transfer (LMCT) transition process, and there was a quick response time of below 3.0 min. Combined with a simple customized device to separate H2S from the sample, the selectivity of the method for H2S detection could be greatly improved, and no interference would be caused even if the other sulfur-containing species coexisted. The luminescence probe presented a favorable sensitivity within a linear range of 0.1-1000 μM along with a detection limit of 23.7 nM. When employed to assay the endogenous sulfide level in the human serum and mouse brain tissue, the approach showed recoveries from 96.3% to 102% with relative standard derivation (RSD) less than 2.0%. By the integration of the responsive luminescent silver-based MOFs with a simple self-assembled headspace separation device, obviously the present strategy could be beneficial to the development and design of the in-field fast H2S measurement, possessing particular advantages in biological systems to eliminate the potential interferences.

Plasmonic nanoparticle etching-based optical sensors: current status and future prospects

Plasmonic nanoparticles are an emerging tool for developing label-free multicolorimetric sensors for biosensing and chemosensing applications. The color absorbed by nanoparticles from visible light is influenced by their size, shape, orientation, and interparticle distance. Differently sized and shaped gold and silver nanoparticles exhibit a wide range of colors, aiding in the development of label-free sensors. Etching is the process of oxidizing nanoparticles, which alters their aspect ratio, shape, plasmonic peak, and outward appearance. It is typically used to create sensitive sensing platforms. Through etching, analytes could be detected in a simple, sensitive, and selective manner. The multicolor readout of nanoparticle etching-based multicolorimetric sensors can overcome the limitations of conventional colorimetric assays and improve the accuracy of visual inspection. This review discusses different approaches for target sensing using nanoparticle etching strategies like direct etching, enzyme-mediated etching, chemical reaction-driven etching, and anti-etching-based sensors and their mechanisms. In the future, etching strategies could be modified into portable sensing devices to detect a variety of analytes, which will aid in the development of on-time, in situ, and point-of-care sensing systems.

TMB+-mediated etching of urchin-like gold nanostructures for colorimetric sensing

The morphology-dependent localized surface plasmon resonance of gold nanostructures has been widely utilized for designing sensors. One method relies on the color change of gold nanoparticles upon etching. In previous work, TMB2+oxidized from 3,3',5,5'-tetramethylbenzidine (TMB) was found to etch gold nanorods (AuNRs), leading to a spectrum of different colors. However, the preparation of TMB2+needs the addition of a strong acid and other harsh conditions. Herein, a new colorimetric biosensing platform was developed using urchin-like gold nanoparticles (AuNUs). Compared with AuNRs, the etching of AuNUs can happen under mild conditions by TMB+at pH 6, protecting enzymes and proteins from denaturation. The role of CTAB surfactant was dissected, and its bromide ions were found to be involved in the etching process. Based on these observations, a one-step colorimetric detection of H2O2was realized by using horseradish peroxidase and H2O2to oxidize TMB. Within 30 min, this system achieved a detection limit of 80 nM H2O2. This work offered fundamental insights into the etching of anisotropic gold nanostructures and optimized the etching conditions. These advancements hold promise for broader applications in biosensing and analytical chemistry.

Multicolor biosensor for hyaluronidase based on target-responsive hydrogel and etching of gold nanorods by H2O2

Hyaluronidase (HAase) is a potential tumor biomarker for diseases of the digestive tract and nervous system, the development of simple and sensitive techniques for HAase determination is urgent needed. Gold nanorods (Au NRs) can be etched by H₂O₂ with high efficiency and display color changing. In this work, a HAase-responsive hydrogel system had been designed and the amount of H₂O₂ spilled from the system had a close relationship with the amount of HAase, then the spilled H₂O₂ had been applied to etch Au NRs. The color change of the solution was used to realize semi-quantitative determination of HAase. Furthermore, the longitudinal peak shift of Au NRs had a linear correlation with the concentration of HAase in the range of 10-60 U/mL (within 40 min) and the limit of detection (LOD) was 3.8 U/mL (S/N = 3), which can be used to realize accurate quantitative analysis of HAase. The proposed method has been applied to monitor HAase in serum of pancreatic cancer patients with satisfied results.

Highly sensitive colorimetric assay for penconazole using gold nanostar-graphene quantum dot composite

In this study, a simple and sensitive colorimetric method for penconazole sensing is reported. It is based on the etching/anti-etching strategy in which gold nanostar@graphene quantum dot (AuNS@GQD) nanocomposite acts as a sensing nanoprobe and IO₄^- as an etching agent. With adding IO₄^- to the solution of AuNSs@GQDs, the sharp tips of NSs are etched and they are transformed into nearly spherical nanostructures, and the color of the solution changes from green to violet. These changes can be attributed to the oxidation of gold atoms at the sharp corners and tips of NSs with I₂, produced by the reaction of IO₄^- with AuNS@GQD solution. When penconazole is added into the system, the color and shape variations of AuNSs caused by periodate are impressively prevented. It can be assigned to the strong binding affinity between nitrogen atoms of penconazole and gold atoms, which protects them from etching by I₂. This mechanism has been affirmed via transmission electron microscopy (TEM) and UV-Vis spectra. This approach exhibited a good linear relationship (R² = 0.999) between the wavelength shift and penconazole concentration in the range of 5.0-1000.0 nM with a limit of detection (LOD) of 1.5 nM. The sensor is stable and reproducible and was used to measure penconazole in spiked water samples with recoveries over 97%.

Advances in immunoassay-based strategies for mycotoxin detection in food: From single-mode immunosensors to dual-mode immunosensors

Mycotoxin contamination in foods and other goods has become a broad issue owing to serious toxicity, tremendous threat to public safety, and terrible loss of resources. Herein, it is necessary to develop simple, sensitive, inexpensive, and rapid platforms for the detection of mycotoxins. Currently, the limitation of instrumental and chemical methods cannot be massively applied in practice. Immunoassays are considered one of the best candidates for toxin detection due to their simplicity, rapidness, and cost-effectiveness. Especially, the field of dual-mode immunosensors and corresponding assays is rapidly developing as an advanced and intersected technology. So, this review summarized the types and detection principles of single-mode immunosensors including optical and electrical immunosensors in recent years, then focused on developing dual-mode immunosensors including integrated immunosensors and combined immunosensors to detect mycotoxins, as well as the combination of dual-mode immunosensors with a portable device for point-of-care test. The remaining challenges were discussed with the aim of stimulating future development of dual-mode immunosensors to accelerate the transformation of scientific laboratory technologies into easy-to-operate and rapid detection platforms.

Potentiometric nanosensor for real-time measurement of hydrogen sulfide in single cell

One potentiometric nanosensor for monitoring intracellular hydrogen sulfide (H₂S) with fast potential response, high selectivity and excellent antifouling properties was developed. This study constructs a powerful tool to real-time track the changes of intracellular H₂S in situ, promoting the future studies of physiologically relevant processes.

Shape-specific MOF-derived Cu@Fe-NC with morphology-driven catalytic activity: Mimicking peroxidase for the fluorescent- colorimetric immunosignage of ochratoxin

Ochratoxin A (OTA), which has strong hepatotoxicity and nephrotoxicity, can accumulate in the human body through the food chain; thus, the selective and effective detection of OTA is urgently required for food security. Nanozymes with hyperfine size and shape control have attracted attention because of their controllable structure and intrinsic activity. Herein, CuFe-bimetal coordinated N-doped carbon (Cu@Fe-NC) with morphology-driven peroxidase-mimicking activity was synthesized using Cu₂O with specific polygonal cubes and fully exposed {111} crystalline facets as the template to produce a CuFe-bimetallic metal organic framework (MOF) and further treating CuFe-MOF with high-temperature pyrolysis. N-doping can confer electronegativity to exhibit high affinity, while the large surface area of the porous carbon support can facilitate rapid adsorption-desorption equilibrium. Using the peroxidase-mimicking Cu@Fe_0.5-NC as a carrier, a versatile immunoassay for the detection of OTA was implemented based on the ratiometric fluorescence and the localized surface plasmon resonance peak shift, achieving a detection limit of 0.52 ng/L in the range of 0.001-10 μg/L. Therefore, the strategy of enhancing enzyme-mimicking activity using specific shapes and crystalline facets may open new avenues for food and environmental analysis.

Multicolor Biosensor for Trypsin Detection Based on the Regulation of the Peroxidase Activity of Bovine Serum Albumin-Coated Gold Nanoclusters and Etching of Gold Nanobipyramids

The detection of trypsin is significantly important for both clinical diagnosis and disease treatment. In this study, an innovative multicolor sensor for trypsin detection has been established based on the regulation of the peroxidase activity of bovine serum albumin-coated gold nanoclusters (BSA-Au NCs) and efficient etching of gold nanobipyramids (Au NBPs). BSA-Au NCs have slight peroxidase enzyme activity and can catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to generate TMB⁺, while trypsin can hydrolyze BSA ligands on the surface of BSA-Au NCs, thus exposing more catalytic active sites of BSA-Au NCs and resulting in the enhancement of the peroxidase activity of BSA-Au NCs, hence more TMB⁺ is generated. Under acidic conditions, TMB⁺ can etch Au NBPs efficiently, consequently affecting the aspect ratio of Au NBPs accompanied by the ultraviolet-visible (UV-vis) spectra blue shifting of the system. Furthermore, this also results in color variations that can be distinguished and recognized by naked eyes without any expensive and sophisticated instruments. This multicolor sensor has an available linear relationship with the logarithm of the trypsin concentration in the range of 0.1-100 μg/mL, and the detection limit is 0.045 μg/mL. The designed sensor has been used to detect the concentration of trypsin in human serum samples from healthy individuals and pancreatitis patients with satisfactory results.

Signal-On and Highly Sensitive Electrochemiluminescence Biosensor for Hydrogen Sulfide in Joint Fluid Based on Silver-Ion-Mediated Base Pairs and Hybridization Chain Reaction

Hydrogen sulfide (H2S) in joint fluid acts as a signal molecule to regulate joint inflammation. Direct detection of H2S in joint fluid is of great significance for the diagnosis and treatment of arthritis. However, due to the low volume of joint fluid and low H2S concentration, existing methods face the problem of the insufficient limit of detection. In this study, a highly sensitive biosensor was proposed by designing a primer probe and combining it with hybrid chain reaction (HCR) under the strong interaction between metal ions and H2S to achieve H2S detection. The primer probe containing multiple cytosine (C) sequences was fixed on a gold electrode, and the C–Ag–C hairpin structure was formed under the action of Ag+. In the presence of H2S, it can combine with Ag+ in the hairpin structure to form Ag2S, which leads to the opening of the hairpin structure and triggers the hybridization chain reaction (HCR) with another two hairpin structures (H1 and H2). A large number of double-stranded nucleic acid structures can be obtained on the electrode surface. Finally, Ru(phen)32+ can be embedded into the double chain structure to generate the electrochemiluminescence (ECL) signal. The linear response of the H2S biosensor ranged from 0.1000 to 1500 nM, and the limit of detection concentration of H2S was 0.0398 nM. The developed biosensor was successfully used to determine H2S in joint fluid.

Magnetofluid-Integrated Multicolor Immunochip for Visual Analysis of Neutralizing Antibodies to SARS-CoV-2 Variants

The global spread of SARS-CoV-2 virus has severely affected human health, life, and work. Vaccine immunization is considered to be an effective means to protect the body from infection. Therefore, timely analysis of the antibody level is helpful to identify people with low immune response or attenuated antibodies so as to carry out targeted and precise vaccine booster immunization. Herein, we develop a magnetofluid-integrated multicolor immunochip, as a sample-to-answer system in a fully enclosed space, for visual analysis of neutralizing antibodies of SARS-CoV-2. Generally, this chip adopts an innovative three-dimensional two-phase system that utilizes mineral oil to block the connection between reagent wells in the vertical direction and provides a wide interface for rapid and nondestructive shuttle of magnetic beads during the immunoassay. In order to obtain visualized signal output, gold nanorods with a size-dependent color effect are used as the colorful chromogenic substrates for evaluation of the antibody level. Using this chip, the neutralizing antibodies were successfully detected in vaccine-immunized volunteers with 83.3% sensitivity and 100% specificity. Furthermore, changes in antibody levels of the same individual over time were also reflected by the multicolor assay. Overall, benefiting from simple operation, airtight safety, and nonrequirement of external equipment, this platform can provide a new point-of-care testing strategy for alleviating the shortage of medical resources and promoting epidemic control in underdeveloped areas.

Equipment-free, gold nanoparticle based semiquantitative assay of SARS-CoV-2-S1RBD IgG from fingertip blood: A practical strategy for on-site measurement of COVID-19 antibodies

COVID-19 remains as a major threat to human society. A reliable, sensitive, rapid, and low requirement assay for serum neutralizing antibodies is needed as a pandemic management tool for estimation of revaccination time and implementation of "immune passport". Using gold nanoparticle (AuNR) as an immunosensor, we have established a semi-quantitative, instrument-free assay for measuring antibody level against SRAS-CoV-2 spike1 (S1) receptor binding domain (RBD) from fingertip blood samples. The testing results by the developed method correlated well with those obtained from conventional ELISA assay, indicating reliable quantitation could be achieved without use of plate reader. A declined of immunoglobulin G (IgG) antibody associated with vaccination time was observed, which agreed well with the data from other reports. The developed method provides a potentially complementary strategy for on-site measurement of COVID-19 antibodies.

Fe-doped MOF-derived N-rich porous carbon nanoframe for H2 S cataluminescence sensing

Metal-doped porous carbon matrix composites are considered as outstanding H₂ S cataluminescence sensing materials for their good sulfur tolerance and high cataluminescence activity. In this work, Fe-doped MOF-derived N-rich porous carbon nanoframe was successfully fabricated by pyrolysis of Fe-doped ZIF-8 in an Ar atmosphere at a temperature of 900 °C, and used for H₂ S cataluminescence sensing. Along with zinc volatilization, the obtained porous carbon nanoframe not only had high specific surface area and abundant voids, but also had well dispersed Fe species doped in the skeleton. Compared with Fe₂ O₃ /ZnO composites derived from the same precursor but different pyrolysis terms, this as-prepared Fe-doped N-rich porous carbon presented three times increase of cataluminescence intensity towards H₂ S, attributing to the porous carbon skeleton which is indispensable for dispersing catalytic active sites and providing more absorptive surface and voids. Comparably, this proposed sensor demonstrated high sensitivity and good selectivity, with the detection range of 1.57-19.58 μg·mL^-1 and detection limit as 0.13 μg·mL^-1 towards H₂ S. This work may provide a new pathway for preparing catalysts for cataluminescence sensing with better metal distribution, higher specific surface area, richer pores than ever before.

Multicolor hydrogen sulfide sensor for meat freshness assessment based on Cu2+-modified boron nitride nanosheets-supported subnanometer gold nanoparticles

Hydrogen sulfide (H₂S) has emerged as an important indicator in the spoilage process of meat. In this study, a mimetic enzyme based on Cu²⁺-modified boron nitride nanosheets-supported gold nanoparticles (AuNPs/Cu²⁺-BNNS) was synthesized, which can be used to catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB). The H₂S gas can inhibit the activity of AuNPs/Cu²⁺-BNNS toward catalytic oxidation of TMB. Meanwhile, the usage of headspace method could avoid most interferences in the rotten sample. Various concentrations of TMB⁺ could change the aspect ratio of the gold nanoroads (AuNRs), which results in vivid color changing and UV-vis spectra shifting. The sensor had a good linear relationship with H₂S concentration ranging from 10.0 to 90.0 μmol/L, and the detection limit is 7.8 μmol/L. The AuNPs/Cu²⁺-BNNS sensors were successfully applied to detect H₂S produced by meat spoilage with satisfying results.

Quick preparation of water-soluble perovskite nanocomposite via cetyltrimethylammonium bromide and its application

A good water-soluble and stable nanocomposite has been facilely prepared by the encapsulation of CsPbBr₃ QDs via cetyltrimethylammonium bromide and mineral oil through sonication, namely CsPbBr₃@CMO nanocomposite. Such method is very quick and simple without complicated instruments and strict conditions. The results reveal that the synthesized CsPbBr₃@CMO nanocomposite is spherical with uniform size and shows remarkably good solubility and stability in water. Specifically, the fluorescent intensity of CsPbBr₃@CMO nanocomposite in water is decreased by 0.76% after 3 h; this result is comparable with those in earlier studies, and the good stability in water might be owned to the hydrophobic core of the CsPbBr₃@CMO nanocomposite. The prepared CsPbBr₃@CMO nanocomposite has been applied as a sensitive fluorescent probe for monitoring hydrogen sulfide (H₂S), and the fluorescence intensity (~ 524 nm) has a linear relationship with the concentration of H₂S in the range 0.15-105 µM with a detection limit of 53 nM, demonstrating application for monitoring H₂S in rat brain coupled with microdialysis apparatus with satisfied results. The present study not only provides a simple but sensitive approach for the detection of H₂S in living body, but also paves the way for expanding the application of CsPbBr₃ QDs to aqueous medium.

Hydrogen sulfide detection and zebrafish imaging by a designed sensitive and selective fluorescent probe based on resorufin

A new long-wavelength fluorescent probe 1 that could specifically identify H₂S has been successfully synthesized and applied for imaging H₂S in zebrafish. Probe 1 was readily prepared by featuring nitrobenzene as the recognition unit coupled to resorufin. The fluorescence off-on response is based on the fact that H₂S can reduce the nitro group to an amino group, followed by the 1,6-rearrangement-elimination and the release of resorufin. By evaluating the application abilities of probe 1 in vivo and vitro, it is shown that probe 1 has high sensitivity and selectivity to H₂S, low background fluorescence interference, with a low detection limit of 17.30 μM. Notably, the occurrence of the reaction can be observed by the naked eye, and the color of the solution changes from yellow to pink. More importantly, it is the first time that using paper chips as carrier to detect H₂S, which lays a foundation for the practical application of detecting H₂S. The excellent analysis and application capabilities of probe 1 make it an effective tool for further application in practice.

A multicolor biosensor for alkaline phosphatase activity detection based on the peroxidase activity of copper nanoclusters and etching of gold nanorods

A multicolor biosensor for ALP activity has been developed based on the peroxidase activity of copper nanoclusters and etching of gold nanorods.

An algorithm-assisted automated identification and enumeration system for sensitive hydrogen sulfide sensing under dark field microscopy

A sensitive H2S sensing strategy has been developed based on the automated identification and enumeration algorithm.

Flexible Plasmonic Biosensors for Healthcare Monitoring: Progress and Prospects

The noble metal nanoparticle has been widely utilized as a plasmonic unit to enhance biosensors, by leveraging its electric and/or optical properties. Integrated with the "flexible" feature, it further enables opportunities in developing healthcare products in a conformal and adaptive fashion, such as wrist pulse tracers, body temperature trackers, blood glucose monitors, etc. In this work, we present a holistic review of the recent advance of flexible plasmonic biosensors for the healthcare sector. The technical spectrum broadly covers the design and selection of a flexible substrate, the process to integrate flexible and plasmonic units, the exploration of different types of flexible plasmonic biosensors to monitor human temperature, blood glucose, ions, gas, and motion indicators, as well as their applications for surface-enhanced Raman scattering (SERS) and colorimetric detections. Their fundamental working principles and structural innovations are scoped and summarized. The challenges and prospects are articulated regarding the critical importance for continued progress of flexible plasmonic biosensors to improve living quality.

Iodide-enhanced Co/Fe-MOFs nanozyme for sensitively colorimetric detection of H2S

In this paper, a simple, rapid, and low-cost colorimetric method was designed based on Co/Fe-MOFs-iodide composite for the quantitative detection of H₂S. It is know that iodide can improve the catalytic activity of bimetallic porous material Co/Fe-MOFs via adsorption into the framework of MOFs. Herein, we demonstrate a novel strategy to enhance the peroxidase-like activity of MOFs. Compared to horseradish peroxidase (HRP), the kinetic measurement results show that Co/Fe-MOFs-iodide exhibits excellent affinity to substrates, promoting electron transfer. Due to the synergetic effect of Co/Fe-MOFs and iodide, and rapid electron transfer process, Co/Fe-MOFs-iodide demonstrates improved peroxidase-like activity. As a proof-of-concept application, a novel, highly sensitive H₂S colorimetric method is established with a detection limit (LOD) of 0.33 nM. In the absence of iodide, LOD is approx. 200-fold higher than that of the amplified colorimetric assay. The proposed method can also accurately detect traces of H₂S in serum samples.

Progress on the reaction-based methods for detection of endogenous hydrogen sulfide

Hydrogen sulfide (H₂S) is a biologically signaling molecule that mediates a wide range of physiological functions, which is frequently misregulated in numerous pathological processes. As such, measurement of H₂S holds great attention due to its unique physiological and pathophysiological roles. Currently, a variety of methods based on the H₂S-involved reactions have been reported for detection of endogenous H₂S, bearing the advantages of good specificity and high sensitivity. This review describes in detail the types of reactions, their mechanisms, and their applications in biological research, thus hopefully providing some guidelines to the researchers in this field for further investigation.

Gold Nanorods: The Most Versatile Plasmonic Nanoparticles

Gold nanorods (NRs), pseudo-one-dimensional rod-shaped nanoparticles (NPs), have become one of the burgeoning materials in the recent years due to their anisotropic shape and adjustable plasmonic properties. With the continuous improvement in synthetic methods, a variety of materials have been attached around Au NRs to achieve unexpected or improved plasmonic properties and explore state-of-the-art technologies. In this review, we comprehensively summarize the latest progress on Au NRs, the most versatile anisotropic plasmonic NPs. We present a representative overview of the advances in the synthetic strategies and outline an extensive catalogue of Au-NR-based heterostructures with tailored architectures and special functionalities. The bottom-up assembly of Au NRs into preprogrammed metastructures is then discussed, as well as the design principles. We also provide a systematic elucidation of the different plasmonic properties associated with the Au-NR-based structures, followed by a discussion of the promising applications of Au NRs in various fields. We finally discuss the future research directions and challenges of Au NRs.

Nanoparticle-based colorimetric sensors to detect neurodegenerative disease biomarkers

Neurodegenerative disorders (NDDs) are progressive, incurable health conditions that primarily affect brain cells, and result in loss of brain mass and impaired function. Current sensing technologies for NDD detection are limited by high cost, long sample preparation, and/or require skilled personnel. To overcome these limitations, optical sensors, specifically colorimetric sensors, have garnered increasing attention towards the development of a cost-effective, simple, and rapid alternative approach. In this review, we evaluate colorimetric sensing strategies of NDD biomarkers (e.g. proteins, neurotransmitters, bio-thiols, and sulfide), address the limitations and challenges of optical sensor technologies, and provide our outlook on the future of this field.

Enzyme-induced multicolor colorimetric and electrochemiluminescence sensor with a smartphone for visual and selective detection of Hg2

In this study, we developed a novel dual-analytical platform for the visual, sensitive, and reliable analysis of mercury ions (Hg²⁺) in environmental water samples. Importantly, thymine (T)-rich DNA probes were utilized to form T-Hg²⁺-T base pairs in the presence of Hg²⁺ to ensure the specificity of the method. We synthesized new luminescent tris(4,4'-dicarboxylicacid-2,2'-bipyridyl) ruthenium (II) dichloride (Ru(dcbpy)₃²⁺)-modified metal-polydopamine frameworks (MPFs@Ru), which were then applied to construct an electrochemiluminescence (ECL) system for the first time, and it achieved accurate and sensitive quantitative detection of Hg²⁺. To achieve rapid on-site determination, a multicolorimetric system based on a smartphone was established by inducing deposition of silver shells on gold nanorods (Au NRs). Under optimized conditions, the dual-modal assay showed an excellent response for Hg²⁺ in the linear range of 2 pmol L^-1 to 500 nmol L^-1, with a low detection limit of 0.32 pmol L^-1. Moreover, the proposed method demonstrated satisfactory selectivity, stability, and acceptable reproducibility for the detection of Hg²⁺. The recovery of lake water samples ranged from 98.53% to 111.97% for the ECL method and from 95.04% to 106.11% for the colorimetric method, indicating the potential applicability of the proposed method for monitoring environmental water samples.

Microcapillary-based multicolor assay for quantitative and sensitive point-of-care testing of proteins

A microcapillary-based multicolor assay was developed for proteins quantification in serum sample with the assistance of manual centrifugal platform. The proposed assay only required the operation of "one suction and one extrusion" to realize the target detection. Myoglobin (Myo), a biomarker in the early stage of acute myocardial infarction (AMI), was chosen as the model target. The microcapillary was first modified with polydopamine (PDA), then Myo aptamer was immobilized on the PDA modified microcapillary and hybridized with glucose oxidase (Gox) functionalized DNA probe (DNA-Gox). The step "one suction" referred to the inhalation of the sample into the functionalized microcapillary. Then the target Myo in the sample could bind to the Myo aptamer on the microcapillary so that DNA-Gox complexes were released from the microcapillary into solution. Through the step "one extrusion", the DNA-Gox complexes in the solution could catalyze glucose to generate hydrogen peroxide, and then the etching of gold nanorods (AuNRs) was initiated, causing a color change from brown to yellow. According to the color change based on the etching of AuNRs, as low as 0.1 nM Myo was detected with naked eyes. Combined with the manual centrifugal platform, even the Myo in the serum samples could be detected without power supply. It was expected to build a universal and adaptable sensing platform for different targets more quickly and efficiently.

Iodide/metal-organic frameworks (MOF) -mediated signal amplification strategy for the colorimetric detection of H2O2, Cr2O72- and H2S

The analytical methods based on colorimetric detection of various analytes have attracted intensive interest. However, most of them display relatively low sensitivity. Herein, a novel colorimetric strategy based on iodide/metal-organic frameworks (MOF)-mediated amplification was developed for low-cost, naked-eye detection and quantification of H₂O₂,Cr₂O₇^2-, and H₂S. Cu-MOFs could catalyze the oxidation of the colorless peroxidase substrate TMB to produce a blue product. The published researches mainly focused on the immobilization or integration of a macromolecule, such as natural enzymes, to enhance MOFs catalytic abilities. The use of small molecules to improve the catalytic performance of MOFs has rarely reported. Due to the negligible steric hindrance, iodide could easily be adsorbed in the framework pore of MOFs to conduct the synergic catalytic effect, and shows a high catalytic effect. As a result, the catalytic activity of Cu-MOFs was dramatically enhanced, and thus, the nanocatalyst could act as an amplifier system for target detection. The detection limits obtained by the amplified method are 25, 30, and 0.2 nM, respectively, which are about 200-fold lower than that of the unamplified colorimetric assays. The colorimetric strategy developed herein provides a novel system for the detection of low concentrations of analytes in complex biological samples.

Providing Multicolor Plasmonic Patterns with Au@Ag Core-Shell Nanostructures for Visual Discrimination of Biogenic Amines

Biogenic amines (BAs) are known as substantial indicators of the quality and safety of food. Developing rapid and visual detection methods capable of simultaneously monitoring BAs is highly desired due to their harmful effects on human health. In the present study, we have designed a multicolor sensor array consisting of two types of gold nanostructures (i.e., gold nanorods (AuNRs) and gold nanospheres (AuNSs)) for the discrimination and determination of critical BAs (i.e., spermine (SM), tryptamine (TT), ethylenediamine (EA), tyramine (TR), spermidine (SD), and histamine (HT)). The design principle of the probe was based on the metallization of silver ions on the surface of AuNRs and AuNSs in the presence of BAs, forming Au@Ag core-shell nanoparticles. Changes in the surface composition, size, and aspect ratio of AuNSs and AuNRs induced a blue shift in the plasmonic band, which was accompanied by sharp and rainbowlike color variations in the solution. The collected data were visually assessed and statistically analyzed by various data visualization and pattern recognition methods. Namely, linear discriminant analysis (LDA) and partial least squares (PLS) regression were employed for the qualitative and quantitative determination of BAs. The responses were linearly correlated to the concentrations of BAs in a wide range of 10-800, 20-800, 40-800, 40-800, 60-800, and 80-800 μmol L^-1 with the limit of detections of 2.46, 4.79, 8.58, 14.26, 10.03, and 27.29 μmol L^-1 for SD, SM, TT, HT, EA, and TR, respectively. Finally, the practical applicability of the sensor array was investigated by the determination of BAs in meat and fish samples by which the potential of the probe for on-site determination of food freshness/spoilage was successfully verified.

Oxidase-like Nanozyme-Mediated Altering of the Aspect Ratio of Gold Nanorods for Breaking through H2O2-Supported Multicolor Colorimetric Assay: Application in the Detection of Acetylcholinesterase Activity and Its Inhibitors

A convenient, fast, and colorful colorimetric platform with high resolution for acetylcholinesterase (AChE) activity and its inhibitors detection based on the regulation of oxidase-like nanozyme-mediated etching of gold nanorods (AuNRs) has been proposed in this work. MnO₂ nanosheets are selected as the nanozyme. Their excellent oxidase-like activity enables the etching process to proceed smoothly without the usage of unstable H₂O₂. When AChE is present, it catalytically hydrolyzes acetylthiocholine (ATCh) to thiocholine (TCh). With high reducing ability, TCh induces the decomposition of MnO₂ nanosheets, causing them to lose their oxidase-like activity. Thus, the etching of AuNRs is hampered. Consequently, with the increasing concentration of AChE, an apparent change in the AuNRs solution color is observed. The proposed platform achieves high-sensitivity detection of AChE (limit of detection = 0.18 mU/mL). Furthermore, the proposed platform also has been demonstrated its applicability for its inhibitors detection. Benefiting from the advantages of convenient and high resolution of visual readout, the proposed platform holds great potential for the detection of AChE and its inhibitors in clinical diagnosis.

New application of a traditional method: colorimetric sensor array for reducing sugars based on the in-situ formation of core-shell gold nanorod-coated silver nanoparticles by the traditional Tollens reaction

An effective and robust colorimetric sensor array for simultaneous detection and discrimination of five reducing sugars (i.e., glyceraldehyde (Gly), fructose (Fru), glucose (Glu), maltose (Mal), and ribose (Rib)) has been proposed. In the sensor array, two negatively charged polydielectrics (sodium polystyrenesulfonate (NaPSS) and sodium polymethacrylate (NaPMAA)), which served as the sensing elements, were individually absorbed on the surface of the cetyltrimethylammonium bromide (CTAB)-coated gold nanorods (AuNR) with positive charges through electrostatic action, forming the designed sensor units (NaPSS-AuNR and NaPMAA-AuNR). In the presence of Tollens reagent (Ag(NH₃)₂OH), Ag⁺ was absorbed on the surface of negatively charged NaPSS-AuNR and NaPMAA-AuNRs. When confronted with differential reducing sugars, different reducing sugars exhibited differential levels of deoxidizing abilities toward Ag⁺, thus Ag⁺ was reduced to diverse amounts of silver nanoparticles (AgNPs) in situ to form core-shell AuNR@AgNP by the traditional Tollens reaction method, leading to distinct colorimetric response patterns (value of A_S/A_L (the ratio of absorbance at 360 nm to that at 760 nm in Ag⁺-NaPMAA-AuNR, and the ratio of absorbance at 360 nm to that at 740 nm in Ag⁺-NaPSS-AuNR)). These response patterns are characteristic for each reducing sugar, and can be quantitatively distinguished by linear discriminant analysis (LDA) at concentrations as low as 10 nM with relative standard deviation (RSD) of 4.11% (n = 3). The practicability of this sensor array has been validated by recognition of reducing sugars in serum and urine samples. A colorimetric sensor array for reducing sugar discrimination based on the reduction of Ag⁺ and in situ formation of AuNR@AgNP.

Convenient detection of H2S based on the photothermal effect of Au@Ag nanocubes using a handheld thermometer as readout

Hydrogen sulfide (H₂S), as a hazardous gas, is often found around dump areas. Long term exposure can cause harm to health, it is highly necessary to develop some simple and sensitive methods for on-site H₂S detection. Herein, a convenient photothermal assay has been designed for the quantitation of H₂S using a handheld thermometer as readout. Au@Ag nanocubes (Au@Ag NCs), a core-shell nanocomposite with strong light absorption at ∼450 nm, was chosen as a novel photothermal agent in this study. Under the laser irradiation at 450 nm, the Au@Ag NCs show a strong photothermal effect, and a significant temperature enhancement can be measured by the thermometer easily. The presence of H₂S can lead to the deposition of sulfur onto Au@Ag NCs, altering the localized surface plasmon resonance absorption, size, surface composition, and morphology of Au@Ag NCs and hence leading to the reduction of photothermal effect. The change of the temperature has a linear relationship with the H₂S concentration in the range of 0.5-80.0 μM with a detection limit of 0.35 μM. By combining with simple sample purification procedures, the developed method has been applied to detect H₂S in garbage odor gas with satisfactory results.

A multi-colorimetric immunosensor for visual detection of ochratoxin A by mimetic enzyme etching of gold nanobipyramids

A multi-colorimetric immunosensor basing on the mimetic enzyme etching of gold nanobipyramids (Au NBPs) was established to detect ochratoxin A (OTA). Octahedral Cu₂O nanoparticles were successfully synthesized through a selective surface stabilization strategy, which can exhibit a peroxidase-like ability to oxidize 3,3',5,5'-tetramethylbenzidine (TMB). Au NBPs can be etched by the product, TMB²⁺, to form a significant longitudinal peak blue shift of local surface plasmon resonance. During the construction of the immunosensor, the microplate was coated with dopamine to immobilized OTA antigens, followed by the immunoreaction of OTA antibody and the Cu₂O-labled secondary antibody. A linear relationship can be found between the local surface plasmon resonance (LSPR) peak changes with the logarithm of OTA concentration in a wide range from 1 ng/L to 5 μg/L, while the detection limit was 0.47 ng/L. Meanwhile, the approximate OTA concentration can be conveniently and intuitively observed by the vivid color changes. Benefiting from the high specificity, the proposed multi-colorimetric immunoassay detection of OTA in millet samples was achieved, indicating the available potential of the immunoassay for the determination of OTA in real samples.

Visual sensing of multiple proteins based on three kinds of metal nanoparticles as sensor receptors

We propose a colorimetric sensing array consisting of 4-aminothiophenol (p-ATP)-modified gold nanoparticles (Au NPs), silver nanoparticles (Ag NPs), and core-shell Au@Ag nanocubes (Au@Ag NCs) as sensing elements to identify multiple proteins according to the diverse colorimetric response patterns. In the absence of proteins, the sensor element solution itself did not agglomerate. After interacting with six proteins (lysozyme (LZM), hemoglobin (HGB), peroxidase from horseradish (HRP), bovine liver from peroxidase (CAT), trypsin from bovin pancreas (TRY), and pepsin (PEP)), due to the different binding ability between the sensing elements and various proteins, the sensing array exhibits a unique pattern of colorimetric variations, linear discrimination analysis (LDA) was applied to analyze the pattern and produced a clustering map for a clearer differentiation of these proteins.

Visual detection of different metal ions based on the tug of war between triangular Au nanoparticles and metal ions against mercaptans

Herein, a new colorimetric sensor array was developed for the first time, which can rapidly recognize 9 types of metal ions (e.g., Ni2+, Zn2+, Cd2+, Cu2+, Cr3+, Fe2+, Se2+, Mn2+, and Mg2+). The colorimetric characteristics of the sensor array were closely related to the oxidation etching of the triangular gold nanoplates (AuNPLs) by hydrogen peroxide (H2O2), catalyzed by horseradish peroxidase (HRP). In the design, two types of thiols (glutathione (GSH) and cysteine (Cys)) as recognition elements were employed to construct the sensor units (AuNPLs/GSH and AuNPLs/Cys) and adjust the etching degrees of AuNPLs in the presence of various metal ions. The differential binding affinities between metal ions and thiols will lead to different degrees of oxidation etching of AuNPLs with hydrogen peroxide, exhibiting characteristic colors, which can be visually distinguished by the naked eye. Thus, the colorimetric sensor array provides a new way for the discrimination of various metal ions, thereby simplifying the water quality analysis.