Stretchable and Photocatalytically Renewable Electrochemical Sensor Based on Sandwich Nanonetworks for Real-Time Monitoring of Cells

Flexible and Stretchable Electrochemical Sensors for Biological Monitoring

The rise of flexible and stretchable electronics has revolutionized biosensor techniques for probing biological systems. Particularly, flexible and stretchable electrochemical sensors (FSECSs) enable the in situ quantification of numerous biochemical molecules in different biological entities owing to their exceptional sensitivity, fast response, and easy miniaturization. Over the past decade, the fabrication and application of FSECSs have significantly progressed. This review highlights key developments in electrode fabrication and FSECSs functionalization. It delves into the electrochemical sensing of various biomarkers, including metabolites, electrolytes, signaling molecules, and neurotransmitters from biological systems, encompassing the outer epidermis, tissues/organs in vitro and in vivo, and living cells. Finally, considering electrode preparation and biological applications, current challenges and future opportunities for FSECSs are discussed.

Rational Design of Cu-Doped Tetrahedron of Spinel Oxide for High-Performance Nitric Oxide Electrochemical Sensor

The real-time detection of nitric oxide (NO) in living cells is essential to reveal its physiological processes. However, the popular electrochemical detection strategy is limited to the utilization of noble metals. The development of new detection candidates without noble metal species still maintaining excellent catalytic performance has become a big challenge. Herein, we propose a spinel oxide doped with heteroatom-Cu-doped Co₃O₄ (Cu-Co₃O₄) for the sensitive and selective detection of NO release from the living cells. The material is strategically designed with Cu occupying the tetrahedral (T_d) center of Co₃O₄ through the formation of a Cu-O bond. The introduced Cu regulates the local coordination environment and optimizes the electronic structure of Co₃O₄, hybridizing with the N 2p orbital to enhance charge transfer. The Cu_Td site can well inhibit the current response to nitrite (NO₂^-), resulting in a high improvement in the electrochemical oxidation of NO. The selectivity of Cu-Co₃O₄ can be markedly improved by the pore size of the molecular sieve and the negative charge on the surface. The rapid transmission of electrons is due to the fact that Cu-Co₃O₄ can be uniformly and densely in situ grown on Ti foil. The rationally designed Cu-Co₃O₄ sensor displays excellent catalytic activity toward NO oxidation with a low limit of detection of 2.0 nM (S/N = 3) and high sensitivity of 1.9 μA nM^-1 cm^-2 in cell culture medium. The Cu-Co₃O₄ sensor also shows good biocompatibility to monitor the real-time NO release from living cells (human umbilical vein endothelial cells: HUVECs; macrophage: RAW 264.7 cells). It was found that a remarkable response to NO was obtained in different living cells when stimulated by l-arginine (l-Arg). Moreover, the developed biosensor could be used for real-time monitoring of NO released from macrophages polarized to a M1/M2 phenotype. This cheap and convenient doping strategy shows universality and can be used for sensor design of other Cu-doped transition metal materials. The Cu-Co₃O₄ sensor presents an excellent example through the design of proper materials to implement unique sensing requirements and sheds light on the promising strategy for electrochemical sensor fabrication.

Real-Time Tracking of Electrical Signals and an Accurate Quantification of Chemical Signals with Long-Term Stability in the Live Brain

The development of in vivo analytical tools and methods for recording electrical signals and accurately quantifying chemical signals is a key issue for a comprehensive understanding of brain events. The electrophysiological microelectrode was invented to monitor electrical signals in free-moving brains. On the other hand, electrochemical assays with excellent spatiotemporal resolution provide an effect way to monitor chemical signals in vivo. Unfortunately, the in vivo electrochemical biosensors still have three limitations. First, many biological species such as reactive oxygen species (ROS) and neurotransmitters demonstrate large overpotentials at conventional electrodes. Thus, it is hard to convert the chemical/electrochemical signals of these molecules into electric signals. Second, the interfacial properties of the recognition molecules assembled onto the electrode surfaces have a great influence on the transmission of electric charge through the interface and the stability of the modified recognition molecules. Meanwhile, the surface of biosensors implanted in the brain is easily absorbed by many proteins present in the brain, resulting in the loss of signals. Finally, activities in the brain including neuron discharges and electrophysiological signals may be affected by electrochemical measurements due to the application of extra potentials and/or currents.This Account presents a deep view of the fundamental design principles and solutions in response to the above challenges for developing in vivo biosensors with high performance while meeting the growing requirements, including high selectivity, long-time stability, and simultaneously monitoring electrical and chemical signals. We aim to highlight the basic criteria based on a double-recognition strategy for the selective biosensing of ROS, H₂S, and H_nS through the rational design of specific recognition molecules followed by electrochemical oxidation or reduction. Recent developments in designing functionalized surfaces through a systematic investigation of self-assembly with Au-S bonds, Au-Se bonds, and Au≡C bonds for facilitating electrochemical properties as well as improving the stability are summarized. More importantly, this Account highlights the novel methodologies for simultaneously monitoring electrical and chemical signals ascribed to the dynamic changes in K⁺, Na⁺, and Ca²⁺ and pH values in vivo. Additionally, SERS-based photophysiological microarray probes have been developed for quantitatively tracking chemical changes in the live brain together with recording electrophysiological signals.The design principles and novel strategies presented in this Account can be extended to the real-time tracking of electrical signals and the accurate quantification of more chemical signals such as amino acids, neurotransmitters, and proteins to understand the brain events. The final part also outlines potential future directions in constructing high-density microarrays, eventually enabling the large-scale dynamic recording of the chemical expression of multineuronal signals across the whole brain. There is still room to develop a multifiber microarray which can be coupled with photometric methods to record chemical signals both inside and outside neurons in the live brains of freely moving animals to understand physiological processes and screen drugs.

Real-time monitoring of 5-HT release from cells based on MXene hybrid single-walled carbon nanotubes modified electrode

Serotonin (5-HT) is an essential inhibitory neurotransmitter in vivo that is critical for interneuronal communication of the nervous system. Herein, we constructed an electrochemical cell-sensing platform for 5-HT detection based on MXene/single-walled carbon nanotubes (SWCNTs) nanocomposite. The one-dimensional SWCNTs with good electrical conductivity are uniformly dispersed on the surface and intermediate layers of the two-dimensional MXene to form a tightly heterogeneous heterostructure. The synthesized MXene-SWCNTs could improve the stacking problem of MXene nanosheets and expose more active sites, effectively promoting the conductive properties and electrochemical activity of the composite. The fabricated MXene-SWCNTs/GCE possessed outstanding detection capability for 5-HT with a wide linear range of 4 nM-103.2 μM and a low detection limit of 1.5 nM. Moreover, the sensor was further applied for the real-time monitoring trace amount of 5-HT releasing from different cell lines, which confirmed its promising applications in 5-HT related physiological and pathological fields. MXene-SWCNTs/GCE was developed and applied for the real-time monitoring of trace amounts of 5-HT secreted from living cells.

Surfactant stabilized gold nanomaterials for environmental sensing applications - A review

Surfactant stabilized Gold (Au) nanomaterials (NMs) have been documented extensively in recent years for numerous sensing applications in the academic literature. Despite the crucial role these surfactants play in the sensing applications, the comprehensive reviews that highlights the fundamentals associated with these assemblies and impact of these surfactants on the properties and sensing mechanisms are still quite scare. This review is an attempt in organizing the vast literature associated with this domain by providing critical insights into the fundamentals, preparation methodologies and sensing mechanisms of these surfactant stabilized Au NMs. For the simplification, the surfactants are divided into the typical and advanced surfactants and the Au NMs are classified into Au nanoparticles (NPs) and Au nanoclusters (NCs) depending upon the complexity in structure and size of the NMs respectively. The preparative methodologies are also elaborated for enhancing the understanding of the readers regarding such assemblies. The case studies regarding surfactant stabilized Au NMs were further divided into colorimetric sensors, surface plasmonic resonance (SPR) based sensors, luminescence-based sensors, and electrochemical/electrical sensors depending upon the property utilized by the sensor for the sensing of an analyte. Future perspectives are also discussed in detail for the researchers looking for further progress in that particular research domain.

Long-term cell culture and electrically in situ monitoring of living cells based on a polyaniline hydrogel sensor

Accurate, in situ and long-term electrically monitoring of cell development plays an important role in cell study, which brings in challenges in terms of biocompatibility, processability, and sensing capability of electrochemical sensors. Based on biocompatible conductive polyaniline (PAni) hydrogels, we constructed a flexible sensor with flexible carbon cloth for electrical analysis of living cells. The carbon fiber substrate modified with conductive PAni hydrogels was selected as the electrode to promote the current collection of the sensor. The three dimensional nanostructured mesoporous matrix of PAni hydrogels is favorable for in situ generation of catalytic Pt nanoparticles and cell growth. With these hierarchically nanostructured features, the hydrogel electrochemical sensor was endowed with high sensitivity and selectivity in the detection of H₂O₂ (with a low detection limit of 1.6 μM in 0.01 M PBS and a wide linear range from 10 μM to 10 mM), and good biocompatibility for cell growth as long as 5 days. The accurate detection of H₂O₂ released from cells enabled us to differentiate the physiological states of cells and imitate the different stimuli-responsive behavior, which can provide real-time information on cell biological events. With outstanding biocompatibility, operability and repeatability, this strategy can be expanded to the fields of other biosensor fabrication and cell-related biomarker monitoring, which exhibits a broad application potential in bioanalysis catering to new generation sensors.

Large-Scale Synthesis of Functionalized Nanowires to Construct Nanoelectrodes for Intracellular Sensing

A strategy for one-pot and large-scale synthesis of functionalized core-shell nanowires (NWs) to high-efficiently construct single nanowire electrodes is proposed. Based on the polymerization reaction between 3,4-ethylenedioxythiophene (EDOT) and noble metal cations, manifold noble metal nanoparticles-polyEDOT (PEDOT) nanocomposites can be uniformly modified on the surface of any nonconductive NWs. This provides a facile and versatile approach to produce massive number of core-shell NWs with excellent conductivity, adjustable size, and well-designed properties. Nanoelectrodes manufactured with such core-shell NWs exhibit excellent electrochemical performance and mechanical stability as well as favorable antifouling properties, which are demonstrated by in situ intracellular monitoring of biological molecules (nitric oxide) and unraveling its relevant unclear signaling pathway inside single living cells.

Rice-Spikelet-like Copper Oxide Decorated with Platinum Stranded in the CNT Network for Electrochemical In Vitro Detection of Serotonin

The specific monitoring of serotonin (ST) has provoked massive interest in therapeutic and biological science since it has been recognized as the third most significant endogenous gastrointestinal neurotransmitter. Hence, there is a great need to develop a sensitive and low-cost sensing platform for the detection of a clinically relevant ST level in biological matrices. Herein, we develop a simple two-step approach for an ultrasensitive electrochemical (EC) sensor with the Cu₂O metal oxide (MO)-incorporated CNT core that has been further deposited with a transitional amount of platinum nanoparticles (Pt NPs). We presented, for the first time, the deposition of Pt NPs on the (CNTs-Cu₂O-CuO) nanopetal composite via the galvanic replacement method, where copper not only acts as a reductant but a sacrificial template as well. The electrocatalytic aptitude of the fabricated EC sensing platform has been assessed for the sensitive detection of ST as a proficient biomarker in early disease diagnostics. The synergy of improved active surface area, remarkable conductivity, polarization effect induced by Pt NPs on CNTs-Cu₂O-CuO nanopetals, fast electron transfer, and mixed-valence states of copper boost up the redox processes at the electrode-analyte junction. The CNTs-Cu₂O-CuO@Pt-modified electrode has unveiled outstanding electrocatalytic capabilities toward ST oxidation in terms of a low detection limit of 3 nM (S/N = 3), wide linear concentration range, reproducibility, and incredible durability. Owing to the amazing proficiency, the proposed EC sensor based on the CNTs-Cu₂O-CuO@Pt heterostructure has been applied for ST detection in biotic fluids and real-time tracking of ST efflux released from various cell lines as early disease diagnostic approaches.

Renewable photoelectrochemical cytosensing platform for rapid capture and detection of circulating tumor cells

Determination of circulating tumor cells (CTCs) is crucial for cancer diagnosis and therapy at an early stage. However, extremely low concentration of CTCs in peripheral blood makes the detection of CTCs challenging. In this study, a reusable cytosensor was developed for rapid detection of CTCs based on excellent photoelectrochemical (PEC) characteristic of semiconductor nanoarrays. Using typical breast cancer cell, MCF-7 cell, as a target model, a PEC sensing platform was constructed with polymerized aminophenylboronic acid (APBA) layer coated CdS/ZnO nanorod arrays, exhibiting outstanding performance for the capture and detection of CTCs. In this design, the polymerized APBA provides abundant binding sites for capturing terminal sialic acid (SA) molecules in CTCs. As a result, the PEC cytosensor shows good sensitivity and specificity with concentrations ranging from 50 to 1.0 × 10⁶ cells/mL MCF-7 cells. Moreover, the PEC cytosensor can be rapidly and effectively recovered via a short-time bias triggered cell release and subsequent repair of APBA. This study establishes a new approach to refine a PEC cytosensor for stable monitoring and provides a robust PEC electrode with high sensitivity and low cost for clinical diagnosis related to CTCs.

Stretchable Electrochemical Sensors for Cell and Tissue Detection

Electrochemical sensing based on conventional rigid electrodes has great restrictions for characterizing biomolecules in deformed cells or soft tissues. The recent emergence of stretchable sensors allows electrodes to conformally contact to curved surfaces and perfectly comply with the deformation of living cells and tissues. This provides a powerful strategy to monitor biomolecules from mechanically deformed cells, tissues, and organisms in real time, and opens up new opportunities to explore the mechanotransduction process. In this minireview, we first summarize the fabrication of stretchable electrodes with emphasis on the nanomaterial-enabled strategies. We then describe representative applications of stretchable sensors in the real-time monitoring of mechanically sensitive cells and tissues. Finally, we present the future possibilities and challenges of stretchable electrochemical sensing in cell, tissue, and in vivo detection.

Biosensors for Studies on Adhesion-Mediated Cellular Responses to Their Microenvironment

Cells interact with their microenvironment by constantly sensing mechanical and chemical cues converting them into biochemical signals. These processes allow cells to respond and adapt to changes in their environment, and are crucial for most cellular functions. Understanding the mechanism underlying this complex interplay at the cell-matrix interface is of fundamental value to decipher key biochemical and mechanical factors regulating cell fate. The combination of material science and surface chemistry aided in the creation of controllable environments to study cell mechanosensing and mechanotransduction. Biologically inspired materials tailored with specific bioactive molecules, desired physical properties and tunable topography have emerged as suitable tools to study cell behavior. Among these materials, synthetic cell interfaces with built-in sensing capabilities are highly advantageous to measure biophysical and biochemical interaction between cells and their environment. In this review, we discuss the design of micro and nanostructured biomaterials engineered not only to mimic the structure, properties, and function of the cellular microenvironment, but also to obtain quantitative information on how cells sense and probe specific adhesive cues from the extracellular domain. This type of responsive biointerfaces provides a readout of mechanics, biochemistry, and electrical activity in real time allowing observation of cellular processes with molecular specificity. Specifically designed sensors based on advanced optical and electrochemical readout are discussed. We further provide an insight into the emerging role of multifunctional micro and nanosensors to control and monitor cell functions by means of material design.

Stretchable Electrochemical Biosensing Platform Based on Ni-MOF Composite/Au Nanoparticle-Coated Carbon Nanotubes for Real-Time Monitoring of Dopamine Released from Living Cells

Existing electrochemical biosensing platforms, using traditional rigid and unstretchable electrodes, cannot monitor the biological signaling molecules released by cells in a mechanically deformed state in real time. Here, a stretchable and flexible electrochemical sensor was developed based on nickel metal-organic framework composite/Au nanoparticle-coated carbon nanotubes (Ni-MOF composite/AuNPs/CNTs) for sensitive detection of dopamine (DA) released by C6 living cells in real time. A Ni-MOF composite was obtained by introducing Ni, NiO, and a carbon frame onto the surface of two-dimensional (2D) Ni-MOF nanosheets using an efficient one-step calcination method. The hybrid of Ni-MOF composite/AuNPs/CNTs that deposited on the poly(dimethylsiloxane) (PDMS) film endowed the sensor with excellent electrochemical performance with a wide linear range of 50 nM to 15 μM and a high sensitivity of 1250 mA/(cm² M) and also provided the sensor with desirable stability against mechanical deformation. Furthermore, the stretchable electrode also displayed good cellular compatibility while C6 living cells can be cultured and proliferated on it with strong adhesion. Then, the DA released by C6 living cells with chemical induction in both natural and stretched states was monitored using our stretchable and flexible electrochemical sensor in real time. This indicates that our new design of flexible Ni-MOF composite/AuNPs/CNTs/PDMS (NACP) film electrodes provides more opportunities for the detection of chemical signals released from cells and soft living organisms even under mechanically deformed states.

Single-atom Ni-N4 provides a robust cellular NO sensor

Nitric oxide (NO) has been implicated in a variety of physiological and pathological processes. Monitoring cellular levels of NO requires a sensor to feature adequate sensitivity, transient recording ability and biocompatibility. Herein we report a single-atom catalysts (SACs)-based electrochemical sensor for the detection of NO in live cellular environment. The system employs nickel single atoms anchored on N-doped hollow carbon spheres (Ni SACs/N-C) that act as an excellent catalyst for electrochemical oxidation of NO. Notably, Ni SACs/N-C shows superior electrocatalytic performance to the commonly used Ni based nanomaterials, attributing from the greatly reduced Gibbs free energy that are required for Ni SACs/N-C in activating NO oxidation. Moreover, Ni SACs-based flexible and stretchable sensor shows high biocompatibility and low nanomolar sensitivity, enabling the real-time monitoring of NO release from cells upon drug and stretch stimulation. Our results demonstrate a promising means of using SACs for electrochemical sensing applications.

The monitoring of nitric oxide is important to a number of disease states and biomedical applications. Here, the authors report on a single nickel atom catalyst based sensor for detecting nitric oxide production from cells.

Photocatalytically renewable peptide-based electrochemical impedance method for sensing lipopolysaccharide

A peptide (Li5-025)-modified gold nanoparticle (AuNP)/(titania (TiO₂) + 5,10,15,20-tetrakis(4-aminophenyl)-21H,23H-porphine (TAPP))/glassy carbon electrode (GCE) was developed for lipopolysaccharide (LPS) determination. This electrode not only performs well in the electrochemical impedance determination of LPS in serum but can also be easily regenerated under light irradiation. Using Fe(CN)₆^3-/4- as a redox probe, LPS recognition can be indicated by the significantly increased electron-transfer resistance (R_et) as a result of the coaction of the increased steric hindrance from the peptide-LPS complex and the electrostatic repulsion between LPS and Fe(CN)₆^3-/4-. The impedimetric signal was acquired in the frequency range 0.1 Hz ~ 100 kHz with an initial voltage of 174 mV and an amplitude of 10 mV. The resistance changes (ΔR_et) are linearly related to the LPS concentrations in a broad range (0.1 pg mL^-1 ~ 100 ng mL^-1) with a low detection limit (0.08 pg mL^-1). Importantly, the electrode shows high selectivity to LPS from Escherichia coli O55:B5 compared to other bacterial sources and considerable anti-interference to 0.1% fetal calf serum, demonstrating its potential application in clinically relevant samples. Another highlight is that the AuNP/(TiO₂ + TAPP)/GCE surface can be photocatalytically regenerated under light irradiation (50 mW cm^-2, 300-2500 nm) without any obvious damage to the electrode microstructure. After simple peptide re-immobilization, the regenerated electrode demonstrates LPS response similar to the peptide less one, and the deviation is only 2.89% after 5-cycle reuse. Graphical abstract A peptide (Li5-025)-modified AuNP/(TiO₂ + TAPP porphine)/GCE was proposed, which not only has excellent electrochemical analytical performances for LPS assay in serum but also can be reused after light irradiation and subsequent peptide re-immobilization.

Fiberoptic-Coupled Spectrofluorometer with Array Detection as a Process Analytical Chemistry Tool for Continuous Flow Monitoring of Fluoroquinolone Antibiotics

Nowadays, there is an increasing need for sensitive real-time measurements of various analytes and monitoring of industrial products and environmental processes. Herein, we describe a fluorescence spectrometer in continuous flow mode in which the sample is fed to the flow cell using a peristaltic pump. The excitation beam is introduced to the sample chamber by an optical fiber. The fluorescence emitted upon excitation is collected at the right angle using another optical fiber and then transmitted to the fluorescence spectrometer which utilizes an array detector. The array detection, as a key factor in process analytical chemistry, made the fluorescence spectrometer suited for multiwavelength detection of the fluorescence spectrum of the analytes. After optimization of the experimental parameters, the system has been successfully employed for sensitive determination of four fluoroquinolone antibiotics such as ciprofloxacin, ofloxacin, levofloxacin, and moxifloxacin. The linear dynamic ranges of four fluoroquinolones were between 0.25 and 20 μg·mL-1, and the detection limit of the method for ciprofloxacin, ofloxacin, levofloxacin, and moxifloxacin were 81, 36, 35, and 93 ng·mL-1, respectively. Finally, the proposed system is carried out for determination of fluoroquinolones in some pharmaceutical formulations.

Construction of a flexible electrochemiluminescence platform for sweat detection

Flexible and wearable chemical sensors show great capability and potential in retrieving physiologically related chemical or biochemical information from elastic and curvilinear living bodies. However, so far, no flexible electrochemiluminescence (ECL) device has been reported, though ECL measurements have been extensively investigated and widely applied in many fields. Herein, we for the first time designed and fabricated a flexible ECL sensor by immobilizing highly luminescent nanospheres on Au nanotube (Au NT) networks, and subsequently coating an elastic molecularly imprinted polymer (MIP) thereon. The as-prepared flexible ECL platform displayed successive and desirable mechanical compliance while generating a very stable ECL signal during deformation, facilitating highly selective detection of physiologically relevant chemicals from bodies. On-body wearable sampling and subsequent detection of lactate and urea from sweat showed the ECL performance of this sensor displaying desirable fidelity, reusability and high stability against disturbance. This work successfully incorporated the ECL sensing model into a flexible and wearable device, therefore providing a promising new path for non-invasively monitoring the products of metabolism for health care and biomedical investigations.

Highly Stretchable and Strain-Insensitive Fiber-Based Wearable Electrochemical Biosensor to Monitor Glucose in the Sweat

Development of high-performance fiber-shaped wearable sensors is of great significance for next-generation smart textiles for real-time and out-of-clinic health monitoring. The previous focus has been mainly on monitoring physical parameters such as pressure and strains associated with human activities. Development of an enzyme-based non-invasive wearable electrochemical sensor to monitor biochemical vital signs of health such as the glucose level in sweat has attracted increasing attention recently, due to the unmet clinical needs for the diabetic patients. To achieve this, the key challenge lies in the design of a highly stretchable fiber with high conductivity, facile enzyme immobilization, and strain-insensitive properties. Herein, we demonstrate an elastic gold fiber-based three-electrode electrochemical platform that can meet the aforementioned criteria toward wearable textile glucose biosensing. The gold fiber could be functionalized with Prussian blue and glucose oxidase to obtain the working electrode and modified by Ag/AgCl to serve as the reference electrode; and the nonmodified gold fiber could serve as the counter electrode. The as-fabricated textile glucose biosensors achieved a linear range of 0-500 μM and a sensitivity of 11.7 μA mM^-1 cm^-2. Importantly, such sensing performance could be maintained even under a large strain of 200%, indicating the potential applications in real-world wearable biochemical diagnostics from human sweat.

Real-time monitoring of peroxynitrite (ONOO−) in the rat brain by developing a ratiometric electrochemical biosensor

As a reactive oxygen species (ROS), peroxynitrite (ONOO⁻) generated by nitric oxide (NO) and superoxide anion (O₂˙⁻) plays important roles in physiological and pathological processes in the brain.

A robust electrochemical sensing of molecularly imprinted polymer prepared by using bifunctional monomer and its application in detection of cypermethrin

This work describes a hybrid electrochemical sensor for highly sensitive detection of pesticide cypermethrin (CYP). Firstly, Ag and N co-doped zinc oxide (Ag-N@ZnO) was produced by sol-gel method, and then Ag-N@ZnO was ultrasonically supported on activated carbon prepared from coconut husk (Ag-N@ZnO/CHAC). Finally, a layer of molecularly imprinted polymer (MIP) was in situ fabricated on glassy carbon electrode by electro-polymerization, with dopamine and resorcinol as dual functional monomers (DM), CYP acting as template (DM-MIP-Ag-N@ZnO/CHAC). Morphological features, composition information and electrochemical properties of DM-MIP-Ag-N@ZnO/CHAC were investigated in detail. It is worth to mention that for the first time response surface method was used to investigate the effect of double monomers and to optimize the ratio between template and monomers. Compared with typical one-monomer involving MIP, the MIP prepared with dual functional monomers (DMMIP) of monomers showed higher response and better selectivity. Under the optimal conditions, a calibration curve of current shift versus concentration of CYP was obtained in the range of 2 × 10^-13~8 × 10^-9 M, and the developed sensor gave a remarkably low detection limit (LOD) of 6.7 × 10^-14 M (S/N = 3). Determination of CYP in real samples was conducted quickly and accurately with our sensor. The DMMIP-Ag-N@ZnO/CHAC electrochemical sensor proposed in this paper has great potential in food safety, drug residue determination and environmental monitoring.

Vertical Gold Nanowires Stretchable Electrochemical Electrodes

Conventional electrodes produced from gold or glassy carbon are outstanding electrochemical platforms for biosensing applications due to their chemical inertness and wide electrochemical window, but are intrinsically rigid and planar in nature. Hence, it is challenging to seamlessly integrate them with soft and curvilinear biological tissues for real-time wearable or implantable electronics. In this work, we demonstrate that vertically gold nanowires (v-AuNWs) possess an enokitake-like structure, with the nanoparticle (head) on one side and nanowires (tail) on the opposite side of the structure, and can serve as intrinsically stretchable, electrochemical electrodes due to the stronger nanowire-elastomer bonding forces preventing from interfacial delamination under strains. The exposed head side of the electrode comprising v-AuNWs can achieve a detection limit for H₂O₂ of 80 μM, with a linear range of 0.2-10.4 mM at 20% strain, with a reasonably high sensitivity using chronoamperometry. This excellent electrochemical performance in the elongated state, in conjunction with low-cost wet-chemistry fabrication, demonstrates that v-AuNWs electrodes may become a next-generation sensing platform for conformally integrated, in vivo biodiagnostics.