Terbium(III) Organic Gels: Novel Antenna Effect-Induced Enhanced Electrochemiluminescence Emitters

1,1,2,2-Tetra(4-carboxylphenyl)ethylene-Based Metal-Organic Gel as Aggregation-Induced Electrochemiluminescence Emitter for the Detection of Aflatoxin B1 Based on Nanosurface Energy Transfer

In this Letter, a sensitive DNA sensing platform was developed using an indium-ion-coordinated 1,1,2,2-tetra(4-carboxylphenyl)ethylene (TPE) metal-organic gel (In-MOG) as an aggregation-induced electrochemiluminescence (AIECL) emitter and nanosurface energy transfer (NSET) as an efficient quenching strategy for detecting aflatoxin B1 (AFB1), the most dangerous food toxin. The coordination occurred in indium ions, and carboxyl groups restricted the internal rotation and vibration of TPE molecules, forcing them to release photons via radiative transitions. The quenchers of microfluidic-produced gold nanoparticles were embedded in a long-tailed triangular DNA structure, where the quenching phenomenon aligned with the theory of ECL-NSET under the overlap of spectra and appropriate donor-acceptor spacing. The proposed analytical method showed a sensitive ECL response to AFB1 in the wide concentration range of 0.50-200.00 ng/mL with a limit of detection of 0.17 ng/mL. Experimental results confirmed that constraining luminescent molecules using coordination and bonding to trigger the AIECL phenomenon was a promising method to prepare signal labels for the trace detection of food toxins.

Oxolinic Acid Generated Green Fluorescence Based on a Terbium-Functionalized Covalent Organic Framework

Oxolinic acid (OXO), a classic environmental contaminant, has a terrible detrimental effect on human health. The exploration of efficient strategies to detect and detecting OXO has remarkable significance. Herein, we reported a novel terbium(III)-functionalized covalent organic framework (Bpy-DhBt-COF@Tb3+) by fixing Tb3+ on the bipyridine-connecting COF (Bpy-DhBt-COF) as a turn-on fluorescent switch toward OXO for the first time. In this platform, Tb3+ acts as the specific recognition units for OXO and the response signal, while Bpy-DhBt-COF acts as the safehaven for Tb3+. Once introducing OXO to Bpy-DhBt-COF@Tb3+, OXO can instead water molecules coordinate with Tb3+ and sensitize Tb3+ instantly, thereby producing a significant fluorescence signal. Profiting from the excellent porosity of Bpy-DhBt-COF@Tb3+, it can obtain optimal response toward OXO only within 10 s with an ultrasensitive detection limit of 12.5 nM. Furthermore, Bpy-DhBt-COF@Tb3+ displayed outstanding selectivity toward OXO than other general quinolones. Based on these, a Tb3+-based COF was explored for the first time for the turn-on fluorescence detection of an OXO with rapid response, high sensitivity, and outstanding selectivity. In this work, we not only exhibit the attractive performance of Tb3+-functionalized COF to detect OXO but also propose a prospect strategy for creating other fluorescent sensors for multiple targets.

Portable, intelligent MIECL sensing platform for ciprofloxacin detection using a fast convolutional neural networks-assisted Tb@Lu2O3 nanoemitter

Environmental pollution caused by ciprofloxacin is a major problem of global public health. A machine learning-assisted portable smartphone-based visualized molecularly imprinted electrochemiluminescence (MIECL) sensor was developed for the highly selective and sensitive detection of ciprofloxacin (CFX) in food. To boost the efficiency of electrochemiluminescence (ECL), oxygen vacancies (OVs) enrichment was introduced into the flower-like Tb@Lu2O3 nanoemitter. With the specific recognition reaction between MIP as capture probes and CFX as detection target, the ECL signal significantly decreased. According to, CFX analysis was determined by traditional ECL analyzer detector in the concentration range from 5 × 10-4 to 5 × 102 μmol L-1 with the detection limit (LOD) of 0.095 nmol L-1 (S/N = 3). Analysis of luminescence images using fast electrochemiluminescence judgment network (FEJ-Net) models, achieving portable and intelligent quick analysis of CFX. The proposed MIECL sensor was used for CFX analysis in real meat samples and satisfactory results, as well as efficient selectivity and good stability.

An Encyclopedic Compendium on Chemosensing Supramolecular Metal-Organic Gels

Chemosensing, an interdisciplinary scientific domain, plays a pivotal role ranging from environmental monitoring to healthcare diagnostics and (inter)national security. Metal-organic gels (MOGs) are recognized for their stability, selectivity, and responsiveness, making them valuable for chemosensing applications. Researchers have explored the development of MOGs based on different metal ions and ligands, allowing for tailored properties and sensitivities, and have even demonstrated their applications as portable sensors such as paper-based test strips for practical use. Herein, several studies related to MOGs development and their applications in the chemosensing field via UV-visible or luminance along with electrochemical approach are presented. These papers explored MOGs as versatile materials with their use in sensing bio or environmental analytes. This review provides a foundational understanding of key concepts, methodologies, and recent advancements in this field, fostering the scientific community.

Dual-source signal amplification electrochemiluminescence sensor combined with molecularly imprinted polymers for the imidacloprid detection

A novel lanthanide metal-organic-gel (MOG)-derived material/nitrogen-doped graphdiyne (Tb-Ru-MOG/CeO2/N-GDY) composite with a dual-source signal amplification strategy was prepared and used to construct a molecularly imprinted sensor based on bifunctional monomers for the detection of imidacloprid (IMI) using electrochemiluminescence (ECL). In a green reaction environment, terbium (III) (Tb3+) can undergo multiple coordination reactions with 4'-(4-carboxyphenyl)-2,2':6',2″-terpyridine (Hcptpy) and tris(4,4'-dicarboxylicacid-2,2'-bipyridyl) ruthenium (II) dichloride (Ru(dcbpy)32+), and combine with ceria nanoparticles (CeO2 NPs) to form Tb-Ru-MOG/CeO2. Within the Tb-Ru-MOG/CeO2 framework, energy transfer from the double ligands can sensitize the central Tb3+, triggering a distinct antenna effect and energy-transfer, and its polyporous configuration offered a nanoconfined space for Ce3+/Ce4+ to effectively catalyze coreactant radicals (S2O82-), leading to in-situ endogenous activation ECL reactions. The conductive N-GDY accelerated electron movement and increased the loading on the electrode surface, enhancing the exogenous excitation of the ECL signals. Leveraging the synergistic effect of the bifunctional monomer, the synthesized molecularly imprinted polymers (MIPs) ECL sensor demonstrated a wide detection range from 10 nM to 10,000 nM for IMI, with a limit of detection (LOD) of 1.37 nM, showcasing an innovative concept for the dual-source strategy of signal amplification in integrated ECL composites to analyze food and environmental hazards.

Renewable Electrochemiluminescence Biosensor Based on Eu-MOGs as a Highly Efficient Emitter and a DNAzyme-Mediated Dual-drive DNA Walker as a Signal Amplifier for Ultrasensitive Detection of miRNA-222

Herein, novel europium metal-organic gels (Eu-MOGs) with excellent cathode electrochemiluminescence (ECL) emission are first used to construct biosensors for the ultrasensitive detection of miRNA-222. Impressively, N and O elements of organic ligand 2,2':6,2″-terpyridine 4,4',4″-tricarboxylic acid (H3-tctpy) can perfectly coordinate with Eu3+ to form Eu-MOGs, which not only reduce nonradiative transition caused by the intramolecular free rotation of phenyl rings in other MOGs to enhance the ECL signal with extraordinary ECL efficiency as high as 37.2% (vs the [Ru(bpy)3]2+/S2O82- ECL system) but also reinforce ligand-to-metal charge transfer (LMCT) by the strong affinity between Eu3+ and N and O elements to greatly improve the stability of ECL signals. Besides, an improved nucleic acid cascade amplification reaction is developed to greatly raise the conversion efficiency from target miRNA-222 to a DNAzyme-mediated dual-drive DNA walker as output DNA, which can simultaneously shear the specific recognition sites from two directions. In that way, the proposed biosensor can further enhance the detection sensitivity of miRNA-222 with a linear range of 10 aM-1 nM and a detection limit (LOD) of 8.5 aM, which can also achieve an accurate response in cancer cell lysates of MHCC-97L and HeLa. Additionally, the biosensor can be self-regenerated by the folding/unfolding of related triplets with pH changes to simplify experimental operations and reduce the cost. Hence, this work proposed novel MOGs with stable and intense ECL signals for the construction of a renewable ECL biosensor, supplying a reliable detection method in biomarker analysis and disease diagnosis.

Ultrasensitive Detection of SARS-CoV-2 Nucleocapsid Protein Based on Porphyrin-Based Metal-Organic Gels with Highly Efficient Electrochemiluminescence at Low Potential

Metal-organic gels (MOGs) are a new type of intelligent soft material, which are bridged by metal ions and organic ligands through noncovalent interactions. In this paper, we prepared highly stable P-MOGs, using the classical organic electrochemiluminescence (ECL) luminescence meso-tetra(4-carboxyphenyl)porphine as the organic ligand and Fe3+ as the metal ion. Surprisingly, P-MOGs can stably output ECL signals at a low potential. We introduced P-MOGs into the ECL resonance energy transfer strategy (ECL-RET) and constructed a quenched ECL immunosensor for the detection of the SARS-CoV-2 nucleocapsid protein (SARS-CoV-2-N). In the ECL-RET system, P-MOGs were used as energy donors, and Au@Cu2O@Fe3O4 were selected as energy acceptors. The ultraviolet-visible spectrum of Au@Cu2O@Fe3O4 partially overlaps with the ECL spectrum of P-MOGs, which can effectively touch off the ECL-RET behavior between the donors and receptors. Under the ideal experimental situation, the linear detection range of the SARS-CoV-2-N concentration was 10 fg/mL to 100 ng/mL, and the limit of detection was 1.5 fg/mL. This work has broad application prospects for porphyrin-MOGs in ECL sensing.

Facile synthesis of dual-ligand europium-metal organic gels for ratiometric electrochemiluminescence detecting I27L gene

Metal organic gels (MOGs) are a new kind of intelligent soft materials with excellent luminescence properties. However, MOGs with dual electrochemiluminescence (ECL) properties have not been reported. In this study, using Eu3+ as metal node, 4'-(4-carboxyphenyl)-2,2':6',2″-terpyridine (Hcptpy) and Luminol as organic ligands, a novel dual-ligand Europium-organic gels (Eu-L-H MOGs) were prepared by simple mixing at room temperature. On the one hand, Eu-L-H MOGs could exhibit strong and stable anodic ECL signals in the phosphate buffered saline (PBS) without the addition of co-reactants, which came from the blue emission of Luminol. On the other hand, using K2S2O8 as a cathodic co-reactant, Eu-L-H MOGs produced cathodic signals, which were derived from the red emission of Eu sensitized by Hcptpy through the antenna effect. Based on the independent dual ECL signals of Eu-L-H MOGs, we selected Alexa Flour 430 as the receptor and anodic ECL emission of Eu-L-H MOGs as the donor to construct the ECL resonance energy transfer (ECL-RET) ratio biosensor, which utilized exonuclease III assisted DNA cycle amplification to achieve ultrasensitive detection of the I27L gene. The detection linearity of I27L ranged from 1 fM to 10 nM, with a detection limit as low as 284 aM. This study developed a straightforward technique for obtaining a single luminescent material with dual signals, and further broadened the analytical application of MOGs in the realm of ECL.

Aggregation-induced electrochemiluminescence enhancement of Ag-MOG for amyloid β 42 sensing

This study aimed to introduce an immunosensor for measuring amyloid β 42 (Aβ42) levels by aggregation-induced enhanced electrochemiluminescence (ECL). Metal-organic gels (MOGs) are novel soft materials with advantages such as high gel stability, good light-emitting properties, and easy preparation. This study used silver nanoparticle metal-organic gel (Ag-MOG) as a substrate to connect Aβ42-Ab2 and the cathodoluminescent probe. Potassium persulfate was used as a co-reactant that could emit a high ECL signal. CuS@Au had the benefits of a relatively large surface area with excellent carrier function; therefore, it was used as a substrate to load a large amount of Aβ42-Ab1, significantly improving the immunosensor sensitivity. The ECL intensity of Aβ42 was linear in the range of 0.01 pg/mL to 250 ng/mL with a detection limit of 2.2 fg/mL (S/N = 3) under optimized detection conditions. This ECL immunosensor has been successfully applied to detect Aβ42 in human serum with the advantages of excellent stability and high selectivity. This method not only expands the potential applications of ECL immunosensors based on biological testing and clinical diagnosis but also provides a viable approach to basic clinical testing.

Competitive substitution in europium metal-organic gel for signal-on electrochemiluminescence detection of dipicolinic acid

Metal-organic gels (MOGs) emerged as an attractive luminescent soft material for electrochemiluminescence (ECL). In this work, a cathodic ECL-activated europium metal-organic gel (Eu-MOG) has been synthesized by a facile mixing of Eu3+ with 4'-(4-carboxyphenyl)-2,2':6',2''-terpyridine (Hcptpy) under mild conditions. The prepared Eu-MOG is highly mesoporous for co-reactant permeation to produce an ultra-stable and high-efficient ECL, based on the antenna effect of Eu3+ coordinating with Hcptpy. Moreover, dipicolinic acid (DPA) can competitively coordinate with Eu3+ instead of water molecules, producing an enhanced ECL signal. Therefore, an ECL enhancement assay was developed for DPA detection. There was a linear relationship between the ECL intensity and the logarithmic concentration of DPA in the 0.01-1 μM range, and the detection limit is 7.35 nM. This work displays the promising application of Eu-MOG in the ECL field, opening a broad inspection for seeking a new generation of ECL luminophores.

Antenna effect of perylene-sensitized up-conversion luminescent material amplifies the signal of electrochemiluminescence biosensor platform for the ultra-sensitive detection of enrofloxacin

Recently, up-conversion luminescent (UCL) materials have caught extensive sight on account of their excellent biocompatibility and weak automatic fluorescence background, but the low optical signal makes researchers shy away. Organic dye-sensitized UCL materials can improve the low optical signal drawback of UCL and rejuvenate it with adjustable optical properties and unique antenna effects. In this work, an efficient, simple and selective electrochemiluminescence (ECL) sensing platform was developed for determination of enrofloxacin (ENR). 3,4,9,10-perylene tetracarboxylic acid (PTCA) was successfully used as an "antenna" to improve the ECL performance of the UCL nanoparticles (PEI-NaYF4: Yb, Er) due to its appropriate excitation spectrum position and superior electron transfer rate. The specific recognition function of the aptamer enabled the sensor to eliminate the interference from conspecific impurity. In the presence of ENR, the specific combination of ENR with aptamer made the aptamer fall from surface of the electrode, thus we could see a considerable enhancement of signal. Under the most favourable conditions, the aptasensor based on antenna effect displayed a wide detection range (1.0 × 10-14∼1.0 × 10-6 M), low limit of detection (LOD = 3.0 × 10-15 M) and receivable recoveries (96.0%-102.4%) during water samples analysis. At this point, antenna effect provides a powerful strategy to expand the application of UCL in the field of ECL biosensing.

A novel micron europium cluster coordination polymer as a strong electrochemiluminescent emitter for accurate and sensitive detection of tetracycline

In this work, a self-luminescent micron europium cluster coordination polymer (Eu-CCP) cathode electrochemiluminescence (ECL) emitter is first reported. The mass percentage of Eu in Eu-CCP is 50.1%, indicating that Eu-CCP has a high-nucleation luminescence center. In addition, our Eu-CCP possesses a stable and efficient ECL red emission performance, and the intensity is approximately 6.5-fold higher than that of the traditional tris(2,2'-bipyridyl)ruthenium(II) dichloride. The enhancement of Eu-CCP luminescence in our system is due to the following reasons: (1) the mixed ligand and high nuclear europium luminescent center can cooperate to improve the quenching effect induced by water or hydroxyl groups; and (2) external coreaction accelerator and coreactant enhancement. We also investigate the application of Eu-CCP in ECL sensors by sensitive detection of tetracycline (TC). The low detection limit (73.5 fmol·L^-1), high selectivity, good stability and satisfactory recoveries indicate that our ECL strategy can be used to detect TC accurately and sensitively.

Electrochemiluminescence nanoemitters for immunoassay of protein biomarkers

The family of electrochemiluminescent luminophores has witnessed quick development since the electrochemiluminescence (ECL) phenomenon of silicon nanoparticles was first reported in 2002. Moreover, these developed ECL nanoemitters have extensively been applied in sensitive detection of protein biomarker by combining with immunological recognition. This review firstly summarized the origin and development of various ECL nanoemitters including inorganic and organic nanomaterials, with an emphasis on metal-organic frameworks (MOFs)-based ECL nanoemitters. Several effective strategies to amplify the ECL response of nanoemitters and improve the sensitivity of immunosensing were discussed. The application of ECL nanoemitters in immunoassay of protein biomarkers for diagnosis of cancers and other diseases, especially lung cancer and heart diseases, was comprehensively presented. The recent development of ECL imaging with the nanoemitters as ECL tags for detection of multiplex protein biomarkers on single cell membrane also attracted attention. Finally, the future opportunities and challenges in the ECL biosensing field were highlighted.

Aluminum(III)-Based Organic Nanofibrous Gels as an Aggregation-Induced Electrochemiluminescence Emitter Combined with a Rigid Triplex DNA Walker as a Signal Magnifier for Ultrasensitive DNA Assay

Due to effective tackling of the problems of aggregation-caused quenching of traditional ECL emitters, aggregation-induced electrochemiluminescence (AIECL) has emerged as a research hotspot in aqueous detection and sensing. However, the existing AIECL emitters still encounter the bottlenecks of low ECL efficiency, poor biocompatibility, and high cost. Herein, aluminum(III)-based organic nanofibrous gels (AOGs) are used as a novel AIECL emitter to construct a rapid and ultrasensitive sensing platform for the detection of Flu A virus biomarker DNA (fDNA) with the assistance of a high-speed and hyper-efficient signal magnifier, a rigid triplex DNA walker (T-DNA walker). The proposed AOGs with three-dimensional (3D) nanofiber morphology are assembled in one step within about 15 s by the ligand 2,2':6',2″-terpyridine-4'-carboxylic acid (TPY-COOH) and cheap metal ion Al³⁺, which demonstrates an efficient ECL response and outstanding biocompatibility. Impressively, on the basis of loop-mediated isothermal amplification-generated hydrogen ions (LAMP-H⁺), the target-induced pH-responsive rigid T-DNA walker overcomes the limitations of conventional single or duplex DNA walkers in walking trajectory and efficiency due to the entanglement and lodging of leg DNA, exhibiting high stability, controllability, and walking efficiency. Therefore, AOGs with excellent AIECL performance were combined with a CG-C⁺ T-DNA nanomachine with high walking efficiency and stability, and the proposed "on-off" ECL biosensor displayed a low detection limit down to 23 ag·μL^-1 for target fDNA. Also, the strategy provided a useful platform for rapid and sensitive monitoring of biomolecules, considerably broadening its potential applications in luminescent molecular devices, clinical diagnosis, and sensing analysis.

Nanomaterials-Based Electrochemiluminescence Biosensors for Food Analysis: Recent Developments and Future Directions

Developing robust and sensitive food safety detection methods is important for human health. Electrochemiluminescence (ECL) is a powerful analytical technique for complete separation of input source (electricity) and output signal (light), thereby significantly reducing background ECL signal. ECL biosensors have attracted considerable attention owing to their high sensitivity and wide dynamic range in food safety detection. In this review, we introduce the principles of ECL biosensors and common ECL luminophores, as well as the latest applications of ECL biosensors in food analysis. Further, novel nanomaterial assembly strategies have been progressively incorporated into the design of ECL biosensors, and by demonstrating some representative works, we summarize the development status of ECL biosensors in detection of mycotoxins, heavy metal ions, antibiotics, pesticide residues, foodborne pathogens, and other illegal additives. Finally, the current challenges faced by ECL biosensors are outlined and the future directions for advancing ECL research are presented.

An adjustable amyloid-β oligomers aptasensor based on the synergistic effect of self-enhanced metal-organic gel luminophore and triple-helix DNA system

Amyloid-β oligomers (AβOs) was the core-biomarker of Alzheimer's disease (AD), and the detection of AβOs is very important for the early diagnosis of AD. However, existing tests for AβOs are majorly suffering from complex process and poor sensitivity. Thus, an adjustable AβOs electrochemiluminescence (ECL) aptasensor based on the synergistic effect of self-enhanced metal-organic gel (AgCNS) and triple-helix DNA system (THS) was successfully constructed. AgCNS was prepared by an extremely simple one-pot method and was an innovative luminophore with excellent ECL performance. The AgCNS-labeled complementary sequence (AgCNS@CP) was interlaced with the unlabeled aptamer (Apt) carrying two short-arms fixed on the gold electrode (GE) to form the THS. Along with the specific-binding of AβOs and Apt, the THS was disrupted and adjusted flexibly between "on" and "off", resulting in significant changes in the ECL signals. Thus, ECL detection of AβOs was sensitively achieved with a detection limit as low as 0.23 fM and the different forms of Aβ can be specifically distinguished. The aptasensor also exhibited satisfactory selectivity, stability and reproducibility. Moreover, when proposed method and ELISA-kit were simultaneously applied to artificial cerebrospinal fluid (A-CSF) samples, the obtained results were completely consistent, reflecting the potential clinical application value of this work.

Mixed-Ligand-Regulated Self-Enhanced Luminous Eu-MOF as an ECL Signal Probe for an Oriented Antibody-Decorated Biosensing Platform

The self-luminescence behavior of lanthanide MOFs (Ln-MOFs) due to the unique antenna effect is considered to be a promising electrochemiluminescence (ECL) emission for biosensors. It is more challenging for Ln-MOFs on account of the difficulty to stimulate Ln ions with the desired energy-transfer efficiency to produce stronger ECL emissions at a low potential. Here, guided by a second ligand-assisted energy-transfer strategy, we present an efficient self-enhanced luminescence mixed-ligand Eu-MOF as an ECL signal probe for an oriented antibody-decorated biosensing platform with a low detection limit and a broad detection range. Diamino terephthalic acid (NH₂-H₂BDC) and 1,10-phenanthroline (Phen) were selected as the first and second ligands, respectively, to form highly conjugated structures, as well as suppress the nonradiative energy transfer. Impressively, Phen precisely adjusts the energy gap between the triplet ligand and the excited state of Eu³⁺, realizing the self-enhancement of ECL efficiency of the Eu-MOF. The mixed ligand adjusted the molar ratio to obtain the stable and strong ECL signal at a lowered triggering potential (0.83 V). In addition, FeCo@CNT features densely active FeCo sites along with a rich hierarchy conductive carbon nanotube (CNT) network, which is efficiently a co-reaction accelerator to produce more TPA^•+ radicals to accelerate the reduction process of the Eu-MOF for achieving the ECL emission amplification. FeCo@CNT with heptapeptide HWRGWVC (HWR) constructed a matrix biosensing interface that allowed the fragment antigen-binding (Fab) regions to target specific antigens and enhance the incubation efficiency. The present study has gone some way toward designing a self-enhanced luminous Eu-MOF, thus giving new fresh impetus to develop high-performance ECL emitters for biological analysis.

Highly Efficient Aggregation-Induced Electrochemiluminescence of Al(III)-Cbatpy Metal-Organic Gels Obtained by Ultrarapid Self-Assembly for a Biosensing Application

Aggregation-induced electrochemiluminescence (AIECL) has attracted extensive interest due to the significant increase in ECL response by restricting free intramolecular rotation and torsion, but traditional AIECL emitters suffer from limited ECL efficiency, high cost, and complex synthetic steps, dramatically limiting their applications. Herein, novel Al(III)-Cbatpy metal-organic gels (Al(III)-Cbatpy-MOGs) with nanofiber morphology and ultrarapid coordination of Al³⁺ and 4'-carboxylic acid-2,2':6',2″-terpyridine (Cbatpy) are developed, which demonstrates an excellent AIECL enhancement behavior far beyond that reported in ECL supramolecular gels. In view of the strong affinity of N and O atoms in Cbatpy toward Al³⁺, Al(III)-Cbatpy-MOGs with high viscosity and stability can be assembled in one step within about 15 s, easily conquering the main predicaments of current AIECL emitters: complicated synthesis steps and poor film formation. Impressively, the ECL efficiency of Al(III)-Cbatpy-MOGs with superemission is about 20 times higher than that of individual Cbatpy molecules, which is attributed to the aggregation of the organic ligand Cbatpy restricting intramolecular rotation and torsion to reduce nonradiative relaxation. Furthermore, compared with traditional metal complexes, Al(III)-Cbatpy-MOGs show the benefits of remarkable biocompatibility and low cost without the involvement of any organic solvents, noble metals, and rare metals. As proof, a "signal-off" sensing platform based on an Al(III)-Cbatpy-MOGs/S₂O₈^2- system was constructed for the sensitive detection of dopamine (DA) with a low detection limit of 0.34 nM. This strategy provides a novel method to prepare cheap metal-organic gels as a highly efficient AIECL emitter, which is promising as a luminescent molecular device and biosensor for clinical diagnostic applications.

Lanthanide Ce(III)/Tb(III) bimetallic coordination polymer as an advanced electrochemiluminescence emitter for epinephrine sensing application

By rationally introducing Ce(III) and Tb(III) into a coordination polymer (CP), a series of lanthanide bimetallic coordination polymers (Tb:Ce-BCPs) has been prepared in this work. Compared with pure Tb-CP and Ce-CP, bimetallic Tb:Ce-BCPs show stronger and more stable ECL intensity, which is mainly attributed to the "dual sensitization effect" combined with the energy transfer from Ce(III) to Tb(III) and the antenna effect from the ligand to the center atoms of Ce(III) and Tb(III). In the meantime, after explore the ECL intensity and morphologies of all these Tb:Ce-BCPs, the results show that the morphologies and ECL intensities of Tb:Ce-BCPs can be adjusted by doping different molar ratios of Ce(III) in Tb:Ce-BCP. Excitingly, Ce(III) can also act as a co-reaction accelerator, effectively promoting S₂O₈^2- to generate more SO₄^•-, thereby enhancing the ECL intensity of Tb:Ce-BCP. That is to say, Ce(III) plays a triple role in Tb:Ce-BCP. Furthermore, the ECL strength of Tb:Ce-BCP decreased by only 1.8% and 3.5%, respectively after the modified electrode was scanned for 800 s and stored for one month. Enlightened by the excellent ECL properties of Tb:Ce-BCP, we modified Tb:Ce-BCP directly on the surface of electrode, and explored its application in electroanalytical chemistry through the detection of epinephrine (EP) and the detection limit is 33 fmol L^-1. Significantly, our ECL sensing strategy promotes the application of lanthanides in ECL sensor and opens vast possibilities for the synthesis of a new generation of ECL emitter in electroanalytical fields.

Introducing Zirconium Organic Gels for Efficient Radioiodine Gas Removal

Iodine radioisotope, as one of the most important fission products of uranium, may cause severe damage to human health when it is accidentally discharged into the environment. Hence, efficient removal of radioactive iodine is one of the most critical issues for both used nuclear fuel (UNF) reprocessing and environmental remediation. In this work, three metal-organic gels (MOGs) were introduced for iodine removal. The presented zirconium-based MOGs, namely, CWNU, CWNU-NH₂, and CWNU-2NH₂, were prepared via moderate solvothermal reactions. These MOGs all exhibit excellent chemical stability and reusability, marked iodine sorption capability, and favorable machinability, which can even rival commercial ones. The sorption capacities are determined to be 3.36, 4.10, and 4.20 g/g, respectively. The increased amount of amino group is considered to be responsible for the elevated iodine sorption capacity and kinetics, as confirmed by combined sorption studies and XPS analysis. The presented work sheds light on the utilization of MOGs for radioiodine capture.

An Iron(III)-Based Metal-Organic Gel-Catalyzed Dual Electrochemiluminescence System for Cytosensing and In Situ Evaluation of the VEGF165 Subtype

The recent surge of interest in metal-organic gels (MOGs) has emerged for their soft porous structure, large surface area, and abundant active metal sites, making them a promising candidate for building catalyst matrices. In this work, facilely synthesized Fe(III)-organic gel was directly used as a robust electrode matrix. Detailed studies illustrated that their Fe(III) centers can speed up the electro-oxidation/reduction of the H₂O₂ coreactant to produce reactive oxygen species for enhancing a potential-resolved dual electrochemiluminescence (ECL) emission. Among them, the anodic signal of luminol varied with the cell concentration based on the impedance ECL mechanism, while the cathodic signal of CdS quantum dots traced the VEGF₁₆₅ subtype at cell surface by specific aptamer recognition. Based on this, a ratiometric strategy was proposed for accurate cytosensing by eliminating environmental interference. Moreover, by cooperating these two signals, a novel strategy was developed for direct evaluation of the VEGF₁₆₅ subtype, further realizing rapid drug screening and subtype assessment on different cell lines. This work not only opens up the promising application of MOGs as an effective catalyst matrix but also develops reliable cell assays and protein subtype identification for clinical diagnosis and research.

Hierarchical porous metal–organic gels and derived materials: from fundamentals to potential applications

This review summarizes recent progress in the development and applications of metal–organic gels (MOGs) and their hybrids and derivatives dividing them into subclasses and discussing their synthesis, design and structure–property relationship.

Copper-Doped Terbium Luminescent Metal Organic Framework as an Emitter and a Co-reaction Promoter for Amplified Electrochemiluminescence Immunoassay

This work designed a signal amplification strategy for construction of a highly sensitive electrochemiluminescence (ECL) biosensor by doping Cu²⁺ in a terbium luminescent metal organic framework (Cu:Tb-MOF) to act as a co-reaction promoter, which enhanced the generation of SO₄^•- radical during the cathodic process in the presence of K₂S₂O₈ as a co-reactant. The porous and hollow morphology and the size of Cu:Tb-MOF could be efficiently tuned via changing the molar ratio of Cu²⁺ and Tb³⁺ and the reaction time, which were related to the specific surface area, pore diameter, and the ECL intensity of the MOF structure. To further improve the sensitivity of the ECL biosensor, H₂O₂ was introduced into the ECL system to act as another co-reaction promoter, leading to a new ECL mechanism involving dual co-reaction promoters. In view of the low electron transfer resistance of Cu:Tb-MOF, a label-free ECL immunosensor was conveniently constructed by co-immobilizing Cu:Tb-MOF and the capture antibody on the electrode surface. Using pro-gastrin-releasing peptide (ProGRP, a biomarker of small-cell lung cancer) as the model target, the proposed immunosensor exhibited excellent performance with a detection range of 1.0 pg·mL^-1 to 50 ng·mL^-1 and a limit of detection down to 0.68 pg·mL^-1 (3σ). This work demonstrated a strategy to use the MOF structures as both an emitter and a co-reaction promoter for amplified ECL emission and proposed an innovative route to extend the application of lanthanide MOFs.

Zinc-Metal Organic Frameworks: A Coreactant-free Electrochemiluminescence Luminophore for Ratiometric Detection of miRNA-133a

Developing a coreactant-free ratiometric electrochemiluminescence (ECL) strategy based on a single luminophore to achieve more accurate and sensitive microRNA (miRNA) detection is highly desired. Herein, utilizing zinc-metal organic frameworks (Zn-MOFs) as the single luminophore, a novel dual-potential ratiometric ECL biosensor was constructed for ultrasensitive detection of miRNA-133a. The as-prepared Zn-MOFs exhibited simultaneous cathode and anode ECL emission. Furthermore, the Zn-MOFs were confirmed to be a multichannel ECL sensing platform with excellent annihilation and coreactant ECL emission. The corresponding ECL behaviors were investigated in detail. Benefiting from the hybridization chain reaction (HCR) amplification technology, N,N-diethylethylenediamine (DEAEA) was modified on hairpin DNA, and the gained products loaded with quantities of DEAEA enhanced the anodic ECL intensity of Zn-MOFs. In the presence of miRNA-133a, the ECL intensity ratio of anode to cathode (I_a/I_c) was significantly increased, which realized the ultrasensitive ratiometric detection of miRNA-133a. In addition, without an exogenous coreactant, the biosensor revealed superb accuracy and stability. Under optimal conditions, the detection linearity of miRNA-133a was from 50 aM to 50 fM with a low detection limit of 35.8 aM (S/N = 3). This is the first work to use Zn-MOFs as a single emitter for reliable ratiometric ECL bioanalysis, which provides a new perspective for fabricating a ratiometric ECL biosensor platform.

Novel Enhanced Lanthanide Electrochemiluminescence Luminophores: Ce3+-Doped TbPO4 Facile Synthesis and Detection for Mucin1

Despite the upsurging interest in electrochemiluminescence (ECL) of lanthanides, the research in this field is still in its infancy due to the low intensity. In this work, a series of Ce³⁺-doped terbium orthophosphates (TbPO₄:Ce) in different proportions have been synthesized through the co-precipitation method at room temperature. Meanwhile, through the investigation of morphologies and ECL properties of these TbPO₄:Ce, it is concluded that the ECL intensity reaches the maximum when the molar ratio of Tb/Ce is 9:1 and the material is nanorod-shaped. The ECL intensity of TbPO₄:Ce is significantly improved by doping with Ce³⁺ due to the dual sensitization strategy of the antenna effect from PO₄^3- to Tb³⁺ and the energy transfer from Ce³⁺ to Tb³⁺. Interestingly, doping with Ce³⁺ can not only adjust morphology of TbPO₄:Ce but also improve the ECL intensity. In addition, to verify the application of TbPO₄:Ce, two single mucin1 (MUC1) aptamers are linked together to form a dual MUC1 aptamer chain. Then, a simple and sensitive ECL biosensor is constructed for the detection of MUC1, which can recognize the double amount of MUC1 and quench the ECL signal. As expected, the proposed biosensor shows good stability and acceptable selectivity and achieves sensitive detection of MUC1 with a dynamic range from 1 fg·mL^-1 to 10 ng·mL^-1 and a limit of detection of 0.5 fg·mL^-1. This work may pave a new avenue for the study of direct ECL emission of lanthanides and prove to be ideal for the research of new ECL luminophores in electrochemical analysis.

An ultrathin 2D Yb(III) metal-organic frameworks with strong electrochemiluminescence as a "on-off-on" platform for detection of picric acid and berberine chloride form

To investigate the strong electrochemiluminescence (ECL) of ultrathin two dimensional metal-organic frameworks (2D MOFs) is crucial. In this work, we reported the strong ECL behavior of 2D Yb-MOFs, which exhibited thickness-dependent ECL. The thinner the 2D Yb-MOFs, the stronger the ECL signals. The corresponding ECL emission mechanism was investigated in detail, which was ascribed to the thinner 2D Yb-MOF with larger specific surface area, provided more luminophores, better electronic conductivity and superior fluorescence quantum yield, which yielded a higher ECL intensity. Considering the excellent ECL performances above, the ultrathin 2D Yb-MOF-1 was selected as new ECL emitter so that a sensor could be fabricated to realize the "on-off-on" detection of picric acid (PA) and berberine chloride form (BCF). The proposed sensor strategy exhibited a good analytical performance, where the linear range for PA detection was from 0.1 μM to 1 μM with a limit of 81.3 nM, and that for BCF detection from 0.05 μM to 1 μM with a limit of 36.5 nM. This study carves out a novel avenue for exploiting excellent ECL materials.

Ultrasensitive near-infrared electrochemiluminescence biosensor derived from Eu-MOF with antenna effect and high efficiency catalysis of specific CoS2 hollow triple shelled nanoboxes for procalcitonin

In this paper, we report a novel multiple amplification strategy for ultrasensitive near-infrared electrochemiluminescence (ECL) immunoassay in K₂S₂O₈ solution. The realization of this strategy is based on the antenna effect of Eu-MOF (EuBTC) and a high efficiency catalysis of CoS₂ hollow triple shelled nanoboxes (TSNBs). The H₃BTC ligand in the antenna effect first undergoes π-π* absorption and a singlet-singlet electronic transition. Its energy passes through the intersystem to the triplet state, next transfers from the lowest excited triplet state to the vibrational energy level of the rare earth ion, finally realizing sensitizing center ion luminescence. Moreover, ionic reaction and structural advantages endow CoS₂ TSNBs a dual signal enhancement effect. This sandwich-type ECL biosensor has a near-infrared luminescence in 800-900 nm, thus avoiding damage to the sample in the meantime. In practical diagnosis, the normal critical value of procalcitonin (PCT) (<0.5 ng/mL) is much higher than the detection limit (3.65 fg/mL) and is in the detection range (10 fg/mL-100 ng/mL), which means that the ECL biosensor has a high sensitivity in the detection of PCT and meet the requirement for diagnosis of disease completely. Therefore, the strategy provides a feasible method for efficient and stable analysis of systemic inflammatory response such as fearful bacterial infection, hepatitis B, and peritonitis.

A cyclic peptide antenna ligand for enhancing terbium luminescence

We present here a cyclic peptide ligand, cy(WQETR), that binds to the terbium ion (Tb3+) and enhances Tb3+ luminescence intensity through the antenna effect. This peptide was identified through screening a cyclic peptide library against Tb3+ with an apparent EC50 of 540 μM. The tryptophan residue from the peptide directly interacts with the Tb3+ ion, which provides access to a low-lying triplet excited state of the tryptophan. Direct excitation of this triplet state enables energy transfer to the Tb3+ ion and enhances Tb3+ luminescence intensity by 150 fold. We further showcase the application of this cy(WQETR)-Tb3+ system by demonstrating the detection of tromethamine with a detection limit of 0.5 mM.

Electrochemiluminescence aptasensor for Siglec-5 detection based on MoS2@Au nanocomposites emitter and exonuclease III-powered DNA walker

Lectins are highly specific binding proteins for glycoproteins which widely exist in living organisms, playing a vital role in exploring the biological evolution process, such as cellular proliferation, differentiation, carcinogenesis and apoptosis. Therefore, the content monitoring of lectin becomes particularly significant and urgent in the bioanalytical application. In this work, we fabricated an aptasensor, majorly capitalizing the eminent affinity between sialic acid-binding immunoglobulin (Ig)-like lectin 5 (Siglec-5) and nucleic acids aptamer (K19), with nontoxic MoS₂@Au nanocomposites as electrochemiluminescence (ECL) emitters based on exonuclease III (Exo III)-powered DNA walker for the bioassays of Siglec-5. The DNA track was constructed on the emitters' surface, providing a reliable platform for the DNA walker's autonomous move. In the assay, the primer DNA in the DNA duplex was replaced by Siglec-5 due to the aptamer interactions and repeatedly released to participate in the movement of the DNA walker, further triggering cascade signal amplification. Finally, our aptasensor indicates significant potential for assays of Siglec-5 with a detection limit of 8.9 pM.

A Superstable Luminescent Lanthanide Metal Organic Gel Utilized in an Electrochemiluminescence Sensor for Epinephrine Detection with a Narrow Potential Sweep Range

Metal organic gels (MOGs) as a new type of porous soft-hybrid supramolecular material have attracted widespread interest in various aspects due to their unique optical properties. In this work, we report a novel electrochemiluminescence (ECL) emission (679 nm) lanthanide MOG, which has been synthesized by a simple and rapid method at room temperature. This MOG (Tb-Ru-MOG) consists of a central metal ion, terbium (III), and two different ligands, tris(4,4'-dicarboxylicacid-2,2'-bipyridyl) ruthenium (II) dichloride (Ru(dcbpy)₃²⁺) and 4'-(4-carboxyphenyl)-2,2':6',2″-terpyridine (Hcptpy). Compared with the classic system of tris(2,2'-bipyridyl) ruthenium (II) dichloride (Ru(bpy)₃²⁺)/S₂O₈^2-, Tb-Ru-MOG/S₂O₈^2- owns a narrower potential sweep range (0.00 to -0.85 V) and a more stable and stronger ECL signal. Interestingly, the ECL intensity only decreased 2.0 and 0.1% after continuous scanning for 8000 s and storing at room temperature for 3 months. The possible ECL mechanism has been discussed in detail, which is mainly attributed to the internal synergies (antenna effect and energy transfer) and external co-reactant. Inspired by the unique luminescence characteristics of Tb-Ru-MOG, the application in electroanalytical chemistry was identified by the ECL on-off response for epinephrine with a linear range from 1.0 × 10^-10 to 1.0 × 10^-3 mol·L^-1 and a detection limit of 5.2 × 10^-11 mol·L^-1. The results suggest that the as-proposed Tb-Ru-MOG will provide a robust pathway for new ECL luminophores in analysis.

Smartphones and Test Paper-Assisted Ratiometric Fluorescent Sensors for Semi-Quantitative and Visual Assay of Tetracycline Based on the Target-Induced Synergistic Effect of Antenna Effect and Inner Filter Effect

Development of selective and sensitive methods for on-site assay of tetracycline (TC) is of great significance for public health and food safety. Herein, a valid ratiometric fluorescence strategy using g-C₃N₄ nanosheets coupled with Eu³⁺ is designed for the assay of TC. In this strategy, both Eu³⁺ and g-C₃N₄ nanosheets serve as the recognition units of TC. The blue fluorescence of g-C₃N₄ nanosheets can be quenched by TC via the inner filter effect (IFE); meanwhile, the red fluorescence of Eu³⁺ can be enhanced by TC through the antenna effect (AE). The synergistic effect of AE and IFE caused by TC makes the developed ratiometric fluorescent sensor display a wide linear range for TC from 0.25 to 80 μM with a detection limit of 6.5 nM and a significant fluorescence color evolution from blue to red. Given its simplicity, free-label, excellent selectivity, high sensitivity, and recognizable color change, point-of-care testing systems, including smartphones and test paper-based assays, are developed for the visual sensing of TC. The integration of smartphones and test paper on a ratiometric fluorescent sensor greatly reduces the detection cost and time, providing a promising method for the qualitative discernment and semi-quantitative assay of TC on-site. Moreover, the potential application of the approach is also verified by detecting TC in milk.

A Zr-cluster based thermostable, self-healing and adaptive metallogel with chromogenic properties responds to multiple stimuli with reversible radical interaction

A Zr-cluster based metallogel is synthesized via an unusual one-pot solvothermal method. The resulting metallogel is robust, adaptive, self-healing, highly thermostable and conductive. Moreover, the metallogel exhibits reversible stimuli-responsive properties. The gel could respond to at least four kinds of stimuli such as light, aliphatic amines, electricity and metals with color and fluorescence tunability. Importantly, the metallogel with electrochromic properties could be used as soft electrochromic devices for smart windows and electro display boards, and metalchromism provides a practical way for coating corrosion monitoring of metal materials.

One-step synthesis of Cu(II) metal-organic gel as recyclable material for rapid, efficient and size selective cationic dyes adsorption

Efficient removal of non-biodegradable and hazardous dyes from wastewater remains a hot research topic. Herein, a rationally designed a Cu(II)-based metal-organic gel (Cu-MOG) with a nanoporous 3D network structure prepared via a simple one-step mixing method was successfully employed for the removal of cationic dyes. The Cu-MOG exhibited high efficiency, with an adsorption capacity of up to 650.32 mg/g, and rapid adsorption efficiency, with the ability to adsorb 80% of Neutral Red within 1 min. The high adsorption efficiency was attributed to its large specific surface area, which enabled it to massively bind cationic dyes through electrostatic interaction, and a nanoporous structure that promoted intra-pore diffusion. Remarkably, the Cu-MOG displayed size-selective adsorption, based on adsorption studies concerning dyes of different sizes as calculated by density functional theory. Additionally, the adsorption performance of the Cu-MOG still maintained removal efficiency of 100% after three regeneration cycles. These results suggested that the Cu-MOG could be expected to be a promising and competitive candidate to conveniently process wastewater.

A Ratiometric Fluorescent Nano-Probe for Rapid and Specific Detection of Tetracycline Residues Based on a Dye-Doped Functionalized Nanoscaled Metal-Organic Framework

Tetracycline (TC) residues are harmful to the environment and human body, so it is necessary to develop a highly sensitive probe for rapid detection of tetracycline residues. In the present paper, a novel dye-doped porous metal–organic framework (UiO-66)-based multi-color fluorescent nano-probe was designed for sensitive ratiometric detection of tetracycline (TC). In this probe, dye-molecules doped UiO-66 was used as a fluorescent internal standard, and the externally grafted lanthanide Eu³⁺ complex was used as response signals. The fluorescence of the Eu³⁺ complex was selectively enhanced with increasing concentrations of TC, which was accompanied by a visual blue-to-red color switch. The nano-probe had a linear response between 0.1 and 6 μM with a lowest detection limit of 17.9 nM, which was much lower than the maximum residue limits set by the United States Food and Drug Administration (676 nM) and the European Union (225 nM). The applicability of this method in the analysis of actual samples was evaluated by the determination of TC in honey and milk samples, indicating satisfactory recovery and good reproducibility. In addition, a cost-effective paper-based probe for rapid and visual detection of TC was developed by fixing the nano-probe on filter papers. With the help of a smartphone camera to capture the fluorescence color, and chromaticity analysis software, the calculation and analysis of red (R) and blue (B) values can be realized, which has the potential for real-time visual detection of TC.