Recognition-Enhanced Metastably Shielded Aptamer for Digital Quantification of Small Molecules

Precise, Sensitive Detection of Viable Foodborne Pathogenic Bacteria with a 6-Order Dynamic Range via Digital Rolling Circle Amplification

The presence of viable pathogenic bacteria in food can lead to serious foodborne diseases, thus posing a risk to human health. Here, we develop a digital rolling circle amplification (dRCA) assay that enables the precise and sensitive quantification of viable foodborne pathogenic bacteria. Directly targeting pathogenic RNAs via a ligation-based padlock probe allows for precisely discriminating viable bacteria from dead one. The one-target-one-amplicon characteristic of dRCA enables high sensitivity and a broad quantitative detection range, conferring a detection limit of 10 CFU/mL and a dynamic range of 6 orders. dRCA can detect rare viable bacteria, even at a proportion as low as 0.1%, which is 50 times more sensitive than the live/dead staining method. The high sensitivity for detecting viable bacteria accommodates dRCA for assessing sterilization efficiency. Based on the assay, we found that, for pasteurization, slightly elevating the temperature to 68 °C can reduce the heating time to 10 min, which may minimize nutrient degradation caused by high-temperature exposure. The assay can serve as a precise tool for estimating the contamination by viable pathogenic bacteria and assessing sterilization, which facilitates food safety control.

A Colorimetric Biosensing Platform with Aptamers, Rolling Circle Amplification and Urease-Mediated Litmus Test

Here we report on an ultra-sensitive colorimetric sensing platform that takes advantage of both the strong amplification power of rolling circle amplification (RCA) and the high efficiency of a simple urease-mediated litmus test. The presence of a target triggers the RCA reaction, and urease-labelled DNA can hybridize to the biotinylated RCA products and be immobilized onto streptavidin-coated magnetic beads. The urease-laden beads are then used to hydrolyze urea, leading to an increase in pH that can be detected by a simple litmus test. We show this sensing platform can be easily integrated with aptamers for sensing diverse targets via the detection of human thrombin and platelet-derived growth factor (PDGF) utilizing structure-switching aptamers as well as SARS-CoV-2 in human saliva using a spike-binding trimeric DNA aptamer. Furthermore, we demonstrate that this colorimetric sensing platform can be integrated into a simple paper-based device for sensing applications.

A high-dimensional microfluidic approach for selection of aptamers with programmable binding affinities

Aptamers are being applied as affinity reagents in analytical applications owing to their high stability, compact size and amenability to chemical modification. Generating aptamers with different binding affinities is desirable, but systematic evolution of ligands by exponential enrichment (SELEX), the standard for aptamer generation, is unable to quantitatively produce aptamers with desired binding affinities and requires multiple rounds of selection to eliminate false-positive hits. Here we introduce Pro-SELEX, an approach for the rapid discovery of aptamers with precisely defined binding affinities that combines efficient particle display, high-performance microfluidic sorting and high-content bioinformatics. Using the Pro-SELEX workflow, we were able to investigate the binding performance of individual aptamer candidates under different selective pressures in a single round of selection. Using human myeloperoxidase as a target, we demonstrate that aptamers with dissociation constants spanning a 20-fold range of affinities can be identified within one round of Pro-SELEX.

Comparison of Aptamer Signaling Mechanisms Reveals Disparities in Sensor Response and Strategies to Eliminate False Signals

Aptamers are nucleic acid-based affinity reagents that have been incorporated into a variety of molecular sensor formats. However, many aptamer sensors exhibit insufficient sensitivity and specificity for real-world applications, and although considerable effort has been dedicated to improving sensitivity, sensor specificity has remained largely neglected and understudied. In this work, we have developed a series of sensors using aptamers for the small-molecule drugs flunixin, fentanyl, and furanyl fentanyl and compare their performance─in particular, focusing on their specificity. Contrary to expectations, we observe that sensors using the same aptamer operating under the same physicochemical conditions produce divergent responses to interferents depending on their signal transduction mechanism. For instance, aptamer beacon sensors are susceptible to false-positives from interferents that weakly associate with DNA, while strand-displacement sensors suffer from false-negatives due to interferent-associated signal suppression when both the target and interferent are present. Biophysical analyses suggest that these effects arise from aptamer-interferent interactions that are either nonspecific or induce aptamer conformational changes that are distinct from those induced by true target-binding events. We also demonstrate strategies for improving the sensitivity and specificity of aptamer sensors with the development of a "hybrid beacon," wherein the incorporation of a complementary DNA competitor into an aptamer beacon selectively hinders interferent─but not target─binding and signaling, while simultaneously overcoming signal suppression by interferents. Our results highlight the need for systematic and thorough testing of aptamer sensor response and new aptamer selection methods that optimize specificity more effectively than traditional counter-SELEX.

Preliminary evaluation of a 64Cu-labeled DNA aptamer for PET imaging of glioblastoma

To develop a DNA aptamer-based PET tracer for imaging of glioblastoma. 5 mM of NOTA-AS1411, 60-min, and 37 °C were selected as the optimal condition for 64Cu radiolabeling of AS1411. 64Cu-NOTA-AS1411 remained stable in PBS and 100% mouse serum for at least six hours. From the PET images, 64Cu-NOTA-AS1411 tended to be excreted out through the kidneys and there was high tracer accumulation in the bladder. There was a higher tumor uptake in the AS1411 group than that in the control group. 64Cu-NOTA-AS1411 is a suitable potential PET tracer for imaging murine glioblastoma.

Functional nucleic acid biosensors utilizing rolling circle amplification

Functional nucleic acids regulate rolling circle amplification to produce multiple detection outputs suitable for the development of point-of-care diagnostic devices.

Target-Mediated 5'-Exonuclease Digestion of DNA Aptamers with RecJ to Modulate Rolling Circle Amplification for Biosensing

We report a new method for biosensing based on the target-mediated resistance of DNA aptamers against 5'-exonuclease digestion, allowing them to act as primers for rolling circle amplification (RCA). A target-bound DNA strand containing an aptamer region on the 5'-end and a primer region on the 3'-end is protected from 5'-exonuclease digestion by RecJ exonuclease in a target-dependent manner. As the protected aptamer is at the 5'-end, the exposed primer on the 3'-end can participate in RCA in the presence of a circular template to generate a turn-on sensor. Without target, RecJ digests the primer and prevents RCA from occurring, allowing quantitative fluorescence detection of both thrombin, a protein, and ochratoxin A (OTA), a small molecule, at picomolar concentrations.

A three-dimensional dynamic DNA walker-mediated branching hybridization chain reaction for the ultrasensitive fluorescence sensing of ampicillin

In this study, a novel, rapid and ultrasensitive fluorescence strategy using the three-dimensional (3D) dynamic DNA walker (DW)-induced branched hybridization chain reaction (bHCR) has been proposed for the detection of ampicillin (AMP). The sensing system was composed of an Nt·Bbvcl-powered DNA walker blocked by an AMP aptamer, hairpin-shaped DNA track probe (TP) and four kinds of metastable hairpin probes as the substrates of bHCR, which triggered the formation of the split G-quadruplex as the signal molecule. Due to the reasonable design, the specific binding between AMP and its aptamer activated the DW, and the DW moved on the surface of the gold nanoparticles (AuNPs) with the help of Nt·Bbvcl to produce primer probes (PPs), which induced bHCR. The products of the bHCR gathered two split G-quadruplex sequences together to form one complete G-quadruplex. The formed G-quadruplex emitted a strong fluorescence signal in the presence of thioflavin-T (ThT) to achieve the purpose of detecting AMP. The sensitivity of this method was greatly improved by the use of the 3D DNA walker and bHCR. The split G-quadruplex enhanced the signal-to-noise ratio (SNR). Under the optimal experimental conditions, a good correlation was obtained between the fluorescence intensity of the sensing system and the concentration of AMP ranging from 5 pM to 500 nM with a limit of detection (LOD) of 3.68 pM. Simultaneously, the method has been applied to the detection of antibiotics in spiked milk samples with satisfactory results.

Recent Advances in Nanomaterial-Based Aptasensors in Medical Diagnosis and Therapy

Rapid and accurate diagnosis of various biomarkers associated with medical conditions including early detection of viruses and bacteria with highly sensitive biosensors is currently a research priority. Aptamer is a chemically derived recognition molecule capable of detecting and binding small molecules with high specificity and its fast preparation time, cost effectiveness, ease of modification, stability at high temperature and pH are some of the advantages it has over traditional detection methods such as High Performance Liquid Chromatography (HPLC), Enzyme-linked Immunosorbent Assay (ELISA), Polymerase Chain Reaction (PCR). Higher sensitivity and selectivity can further be achieved via coupling of aptamers with nanomaterials and these conjugates called "aptasensors" are receiving greater attention in early diagnosis and therapy. This review will highlight the selection protocol of aptamers based on Traditional Systematic Evolution of Ligands by EXponential enrichment (SELEX) and the various types of modified SELEX. We further identify both the advantages and drawbacks associated with the modified version of SELEX. Furthermore, we describe the current advances in aptasensor development and the quality of signal types, which are dependent on surface area and other specific properties of the selected nanomaterials, are also reviewed.

Graphene-nucleic acid biointerface-engineered biosensors with tunable dynamic range

Programmed biosensors with tunable quantification range and sensitivity would greatly broaden their application in medical diagnosis, food safety and environmental analysis. Herein, we proposed a graphene-nucleic acid biointerface-engineered biosensor, allowing target molecules to be detected with adjustable dynamic ranges and sensitivities. The biosensors were programmed by simply tuning the poly A tail of aptamer probes. The tuning of the poly A tail would allow the interaction between aptamer probes and graphene oxide (GO) to be modulated, in turn programing the competitive binding processes of aptamer probes to target molecules and GO. The biosensors, termed affinity-tunable aptasensors (atAptasensors) could be easily tuned with different dynamic ranges by using aptamer probes with different tail lengths, and the dynamic range could be extended to be over 3 orders by a combined use of multiple aptamer probes. Remarkably, the specificity of aptamer probes could be increased by increasing the interaction between aptamer probes and GO. Reliability of atAptasensor for ATP detection was tested in serum and milk samples, and we also applied atAptasensor for culture-independent analysis of microorganism pollution.

Rolling Circle Replication for Biosensing, Bioimaging, and Biomedicine

Rolling circle replication (RCR), including rolling circle amplification (RCA) and rolling circle transcription (RCT), is an isothermal enzymatic reaction. Because of its high amplification efficiency, RCR is a powerful biosensing tool for detecting biomolecules. In recent years, RCR has also been extended to the field of bioimaging to better understand biological pathways. Furthermore, RCR provides a simple technique to design and generate DNA/RNA structures with unique advantages in delivering drugs and enhanced targeting ability. In this review, we introduce the fundamentals of RCR and describe the most recent advances in RCR-based detection methods and delivery vehicles for biosensing, bioimaging, and biomedicine. Finally, some challenges and further opportunities of RCR-based biotechnology are discussed.

Recent progress in mycotoxins detection based on surface-enhanced Raman spectroscopy

Mycotoxins are toxic compounds naturally produced by certain types of fungi. The contamination of mycotoxins can occur on numerous foodstuffs, including cereals, nuts, fruits, and spices, and pose a major threat to humans and animals by causing acute and chronic toxic effects. In this regard, reliable techniques for accurate and sensitive detection of mycotoxins in agricultural products and food samples are urgently needed. As an advanced analytical tool, surface-enhanced Raman spectroscopy (SERS), presents several major advantages, such as ultrahigh sensitivity, rapid detection, fingerprint-type information, and miniaturized equipment. Benefiting from these merits, rapid growth has been observed under the topic of SERS-based mycotoxin detection. This review provides a comprehensive overview of the recent achievements in this area. The progress of SERS-based label-free detection, aptasensor, and immunosensor, as well as SERS combined with other techniques, has been summarized, and in-depth discussion of the remaining challenges has been provided, in order to inspire future development of translating the techniques invented in scientific laboratories into easy-to-operate analytic platforms for rapid detection of mycotoxins.

Metal-induced G-quadruplex polymorphism for ratiometric and label-free detection of lead pollution in tea

Lead pollution are critical concerns for food safety and human health. Herein, a ratiometric metal-induced G-quadruplex polymorphism was introduced to construct aptamer probes, enabling label-free and ratiometric detection of lead in tea, thus is promising for on-site detection of lead pollution. The key feature of the aptamer probe is the synergistic utilization of the dual-wavelength fluorescent signal outputs from a G-quadruplex specific dye and a DNA intercalation dye under a single-wavelength excitation, leading to a more stable and reliable recognition of Pb²⁺ than that of analyses based on single fluorescent reporter. The aptamer probe allowed to a mix-and-read, rapid, cost-effective detection of Pb²⁺ with high specificity and accuracy. Pb²⁺ analysis in tap water and tea exhibited good performance with recovery rates of 92.3%-109.0%. The adoption of ratiometric metal-induced G-quadruplex polymorphism would be a compelling design strategy for constructing robust aptasensor, facilitating the translation of aptamer for food safety control.

Dual Triple Helix-Aptamer Probes for Mix-and-Read Detecting Antibiotics in Fish and Milk

Antibiotic abuse in agricultural products leads to serious food safety issues. To this end, we proposed a mix-and-read and enzyme-free amplified assay for antibiotics based on a dual triple helix-aptamer probe, potentially applicable for on-site monitoring of antibiotic residues. A dual triple helix-aptamer probe can leverage the response toward target molecules without enzyme-based amplification, rendering it sensitive and robust for profiling target molecules. The proposed assay allowed mix-and-read detection of chloramphenicol with a detection limit of 0.18 nM. Besides, it accommodated for specifically resolving chloramphenicol among other antibiotics. Chloramphenicol residual in aquatic products in fish and milk can be precisely determined. Thus, the aptamer probe deems to enrich the toolbox for managing antibiotic use.

Directly profiling intact Staphylococcus aureus in water and foods via enzymatic cleavage aptasensor

Staphylococcus aureus (S. aureus) causes serious food-borne diseases, and tools able to directly profile intact S. aureus would greatly facilitate food safety and public health. Herein, we proposed a biosensing platform for culture-independent and separation-free profiling S. aureus, thus allow us to directly detect intact S. aureus in complex samples. The binding protection effect of aptamer-cell complex was introduced to construct the aptasensor, and it allowed to eliminate the optimization of aptamer probe sequences. The proposed aptasensor, terms enzymatic cleavage aptasensor could achieve a sensitive (a detection limit of 64 CFU/mL) and broad-concentration quantification (dynamic range 10²-10⁷ CFU/mL) of S. aureus. Furthermore, it could specifically identify intact S. aureus in complex samples, and the quantifying of S. aureus was achieved in tap water, milk and porker with high precision. Therefore, enzymatic cleavage aptasensor could be a good candidate for on-site biosensing platform of S. aureus, as well as other pathogens by replacing the aptamer sequences.

Re-Evaluating the Conventional Wisdom about Binding Assays

Analytical technologies based on binding assays have evolved substantially since their inception nearly 60 years ago, but our conceptual understanding of molecular recognition has not kept pace. Contemporary technologies, such as single-molecule and digital measurements, have challenged, or even rendered obsolete, core concepts behind conventional binding assay design. Here, we explore the fundamental principles underlying molecular recognition systems, which we consider in terms of signals generated through concentration-dependent shifts in equilibrium. We challenge certain orthodoxies related to binding-based detection assays, including the primary importance of a low dissociation constant (K_D) and the extent to which this parameter constrains dynamic range and limit of detection. Lastly, we identify key principles for designing binding assays that are optimally suited for a given detection application.

Circular Nucleic Acids: Discovery, Functions and Applications

Circular nucleic acids (CNAs) are nucleic acid molecules with a closed-loop structure. This feature comes with a number of advantages including complete resistance to exonuclease degradation, much better thermodynamic stability, and the capability of being replicated by a DNA polymerase in a rolling circle manner. Circular functional nucleic acids, CNAs containing at least a ribozyme/DNAzyme or a DNA/RNA aptamer, not only inherit the advantages of CNAs but also offer some unique application opportunities, such as the design of topology-controlled or enabled molecular devices. This article will begin by summarizing the discovery, biogenesis, and applications of naturally occurring CNAs, followed by discussing the methods for constructing artificial CNAs. The exploitation of circular functional nucleic acids for applications in nanodevice engineering, biosensing, and drug delivery will be reviewed next. Finally, the efforts to couple functional nucleic acids with rolling circle amplification for ultra-sensitive biosensing and for synthesizing multivalent molecular scaffolds for unique applications in biosensing and drug delivery will be recapitulated.

Engineering Multivalence Aptamer Probes for Amplified and Label-Free Detection of Antibiotics in Aquatic Products

Excessive use of antibiotics in aquatic products is a serious problem for food safety and human health, and on-site detection of antibiotics is highly demanded. Herein, we proposed multivalence aptamer probes, allowing sensitive, label-free, and homogeneous detection of antibiotics in different aquatic products. Compared to commonly used aptamers, multivalence aptamer probes can provide multiple binding sites and a higher affinity for target molecules, and the iterative binding on different binding sites contributes to an amplified recognition effect, sharply increasing the response and sensitivity of aptamer probes. The 2-valence aptamer probes conferred a limit of detection of 0.097 nM for kanamycin detection, where it is estimated that their sensitivity is enhanced 12 times compared to 1-valence aptamer probes. Meanwhile, multivalence aptamer probes allowed us to specifically identify kanamycin among other antibiotics. It could detect kanamycin residual in aquatic products including river eel and puffer fish, as well as tap water with high precision. A multivalence design strategy of aptamer probes would significantly improve the detection performance of aptamers, facilitating the translation of aptamer for food safety control.

Graphene/aptamer probes for small molecule detection: from in vitro test to in situ imaging

Small molecules are key targets in molecular biology, environmental issues, medicine and food industry. However, small molecules are challenging to be detected due to the difficulty of their recognition, especially in complex samples, such as in situ in cells or animals. The emergence of graphene/aptamer probes offers an excellent opportunity for small molecule quantification owing to their appealing attributes such as high selectivity, sensitivity, and low cost, as well as the potential for probing small molecules in living cells or animals. This paper (with 130 refs.) will review the application of graphene/aptamer probes for small molecule detection. We present the recent progress in the design and development of graphene/aptamer probes enabling highly specific, sensitive and rapid detection of small molecules. Emphasis is placed on the success in their development and application for monitoring small molecules in living cells and in vivo systems. By discussing the key advances in this field, we wish to inspire more research work of the development of graphene/aptamer probes for both on-site or in situ detection of small molecules and its applications for investigating the functions of small molecules in cells in a dynamic way. Graphical abstract Graphene/aptamer probes can be used to construct different platforms for detecting small molecules with high specificity and sensitivity, both in vitro and in situ in living cells and animals.

Colorimetric adenosine assay based on the self-assembly of aptamer-functionalized gold nanorods

A colorimetric method is presented for ultrasensitive determination of adenosine. The assay is based on side-by-side self-assembly of aptamer-functionalized gold nanorods (Au NRs). It relies on the fact that the conjugation of the helper DNA predominantly occurs at the terminal ends of the Au NRs rather than at their sides. The adenosine aptamers consist of two pieces of ssDNA (termed C1 and C2) that were individually attached to the sides of Au NRs. In the presence of adenosine, it will be captured by C1 and C2 to form a stable sandwich structure. As a result, a side-to-side assembly of the Au NRs occurs. If the adenosine concentration is increased, the absorbance of the Au NRs at 742 nm gradually decreases, and the color changes from brick red to dark brown. Response is linear range in the 10 pM to 5 nM adenosine concentration range, and the detection limit is as low as 3.3 pM. Adenosine analogues such as uridine and cytidine do not interfere. The method was used to quantify adenosine in serum samples at concentrations as low as 10 pM. Graphical abstractSchematic representation of an effective colorimetric method for adenosine detection based on target adenosine-induced side-by-side self-assembly of gold nanorods (Au NRs).

Thioflavin T specifically brightening “Guanine Island” in duplex-DNA: a novel fluorescent probe for single-nucleotide mutation

Here, we found that Thioflavin T (ThT) could specifically bind with a G-GGG unit (named as “Guanine Island”) in double stranded DNA (ds-DNA).