Highly Efficient Abiotic Assay Formats for Methyl Parathion: Molecularly Imprinted Polymer Nanoparticle Assay as an Alternative to Enzyme-Linked Immunosorbent Assay

Recent reports on the sensing strategy and the On-site detection of illegal drugs

In this review, works on the on-site detection of illegal drugs in recent years are summarised and discussed, most of which were published within the past five years. The detection methods are categorised as colourimetric, fluorescence, Raman spectrometry, ion mobility spectrometry, electrochemistry, and mass spectrometry. Also, strategies that are possibly suitable for on-site detection and the actual instrumentation to be used in the field are listed.

Electrochemiluminescence Sensor Based on CTS-MoS2 and AB@CTS with Functionalized Luminol for Detection of Malathion Pesticide Residues

The accumulation of pesticide residues poses a significant threat to the health of people and the surrounding ecological systems. However, traditional methods are not only costly but require expertise in analysis. An electrochemiluminescence (ECL) aptasensor was developed using chitosan and molybdenum disulfide (CTS-MoS2), along with acetylene black (AB@CTS) for the rapid detection of malathion residues. Due to the weak interaction force, simple composite may lead to uneven dispersion; MoS2 and AB were dissolved in CTS solution, respectively, and utilized the biocompatibility of CTS to interact with each other on the electrode. The MoS2 nanosheets provided a large specific surface area, enhancing the utilization rate of catalytic materials, while AB exhibited excellent conductivity. Additionally, the dendritic polylysine (PLL) contained numerous amino groups to load abundant luminol to catalyze hydrogen peroxide (H2O2) and generate reactive oxygen species (ROS). The proposed ECL aptasensor obtained a low detection limit of 2.75 × 10-3 ng/mL (S/N = 3) with a good detection range from 1.0 × 10-2 ng/mL to 1.0 × 103 ng/mL, demonstrating excellent specificity, repeatability, and stability. Moreover, the ECL aptasensor was successfully applied for detecting malathion pesticide residues in authentic samples with recovery rates ranging from 94.21% to 99.63% (RSD < 2.52%). This work offers valuable insights for advancing ECL sensor technology in future applications.

Rapid and sensitive detection of methyl parathion in rice based on carbon quantum dots nano-fluorescence probe and inner filter effect

A highly sensitive fluorescent sensing system of novel carbon quantum dots nano-fluorescent probe based on corn stalks was established for the determination of methyl parathion by alkaline catalytic hydrolysis and inner filter effect mechanism. The carbon quantum dots nano-fluorescent probe was prepared from corn stalks using an optimized one-step hydrothermal method. The detection mechanism of methyl parathion was revealed. The reaction conditions were optimized. The linear range, sensitivity and selectivity of the method were evaluated. Under the optimal conditions, the carbon quantum dots nano-fluorescent probe exhibited high selectivity and sensitivity to methyl parathion, achieving a linear range of 0.005-14 µg/mL. The fluorescence sensing platform was applied to the detection of methyl parathion in rice samples, and the results showed that the recoveries range from 91.64 to 104.28 %, and the relative standard deviations were less than 4.17 %. The detection limit for methyl parathion in rice samples was 1.22 µg/kg, and the limit of quantitation (LOQ) was 4.07 µg/kg, which was very satisfactory.

A Biomimetic Polymer for the Extraction and Purification of Superior Analogues of Amphotericin B

Amphotericin B has been an essential drug in the fight against leishmaniasis and fungal pathogens for decades, and has more recently gained attention for the very limited microbial resistance displayed against it. However, its toxicity has restricted its use to only the most severe cases of disease, and attempts to reduce these ill effects via formulation have had only minor success. Genetic engineering has allowed the development of superior amphotericin analogues, notably 16-descarboxyl-16-methyl amphotericin B (MeAmB), which shows a ten-fold reduction in toxicity in addition to a slight improvement in therapeutic activity. However, MeAmB is difficult to extract from its bacterial source and purify. Presented here is an alternative method of MeAmB purification. A biomimetic polymer with a high affinity for MeAmB was designed via computational modelling and synthesised. Prepared as a separation column, the polymer was able to retain the target MeAmB whilst allowing the removal of cell debris from the bacterial extract. Starting with a simple bacterial extract, the relatively simple process allowed the purification of an MeAmB salt complex at approximately 70% MeAmB, and likely higher purification from further extraction. The mean MeAmB recovery between the pre-purification extract sample and the final product was 81%. This is the first successful demonstration of extraction or purification of any amphotericin molecule with any polymeric material. The biomimetic polymer was additionally reusable and simple to fabricate, giving this technique significant advantages over traditional methods of extraction and purification of valuable compounds.

Dissolution-Enhanced Luminescence Enhanced Digital Microfluidics Immunoassay for Sensitive and Automated Detection of H5N1

Protein bioassay is a critical tool for the screening and detection of protein biomarkers in disease diagnostics and biological applications. However, the detection sensitivity and system automation of current immunoassays do not meet the emerging demands of clinical applications. Here, we developed a dissolution-enhanced luminescence-enhanced digital microfluidics immunoassay (DEL-DMF), which significantly improves the sensitivity and automation of the protein bioassay. In DEL-DMF, the sample and reagent droplets are controlled to complete the processes of sample transport, immunoreaction, and buffer washing, which not only minimizes sample consumption to 2 μL and enhances the binding efficiency of immunoreaction but also streamlines all the procedures and simplifies the process of immunoassay. Moreover, dissolution-enhanced luminescence using NaEuF₄ NPs as nanoprobes boosts the fluorescence and increases the sensitivity of the bioassay. We demonstrate the enhanced analytical performance of our DEL-DMF immunoassay to detect H5N1 hemagglutinin in human serum and saliva. A limit of detection of 1.16 pM was achieved in less than 0.5 h with only 2 μL sample consumption. Overall, our DEL-DMF immunoassay combines the merits of the microfluidics platform and dissolution-enhanced luminescence, thus affording superior detection sensitivity and system automation for protein biomarkers. This novel immunoassay microsystem holds great potential in clinical and biological applications.

Molecularly Imprinted Polymer-Based Sensors for Protein Detection

The accurate detection of biological substances such as proteins has always been a hot topic in scientific research. Biomimetic sensors seek to imitate sensitive and selective mechanisms of biological systems and integrate these traits into applicable sensing platforms. Molecular imprinting technology has been extensively practiced in many domains, where it can produce various molecular recognition materials with specific recognition capabilities. Molecularly imprinted polymers (MIPs), dubbed plastic antibodies, are artificial receptors with high-affinity binding sites for a particular molecule or compound. MIPs for protein recognition are expected to have high affinity via numerous interactions between polymer matrices and multiple functional groups of the target protein. This critical review briefly describes recent advances in the synthesis, characterization, and application of MIP-based sensor platforms used to detect proteins.

Molecularly imprinted nanoparticle-based assay (MINA) for microcystin-LR detection in water

Microcystins (MCs) are highly toxic peptides produced by cyanobacteria during algal blooms. Microcystin-leucine-arginine (MC-LR) is the most toxic and common MC variant with major effects on human and animal health upon exposure. MC-LR detection has become critical to ensure water safety, therefore robust and reliable analytical methods are needed. This work reports the development of a simple and optimized Molecularly Imprinted Nanoparticle-Based Assay (MINA) for MC-LR detection in water. Molecularly Imprinted Nanoparticles (MINs) were prepared by solid-phase polymerization on glass beads conjugated to MC-LR through (3-aminopropyl) triethoxysilane (APTES) via amide bonding. APTES-modified glass beads were obtained under optimized conditions to maximize the density of surface amino groups available for MC-LR conjugation. Two quinary mixtures of acrylic monomers differing in charge, polarity, and functionality were selected from molecular docking calculations and used to obtain MINs for MC-LR recognition using N,N'-methylene-bis-acrylamide (BIS) as the crosslinking agent. MINs were immobilized by physical adsorption onto 96-well polystyrene microplate and evaluated as per their rebinding capacity toward the analyte by using a covalent conjugate between MC-LR and the enzyme horseradish peroxidase (HRP). Experimental conditions for the MINs immobilization protocol, HRP-MC-LR concentration, and composition of the blocking solution were set to maximize the colorimetric response of the MINs compared to non-treated wells. Optimized conditions were then applied to conduct competitive MINAs with the HRP-MC-LR conjugate and the free analyte, which confirmed the preferential binding of MC-LR to the immobilized MINs for analyte concentrations ranging from 1 × 10^-5 nmol L^-1 to 100 nmol L^-1. The best competitive MINA showed a limit of detection of 2.49 × 10^-4 nmol L^-1 and coefficients of variation less than 10% (n = 6), which are auspicious for the use of MINs as analytical tools for MC-LR detection below the permissible limits issued by WHO for safe water consumption (1.00 nmol L^-1). This assay also proved to be selective to the analyte in cross-reactivity studies with two analogous microcystins (MC-RR and MC-YR). Analyses of lagoon and drinking water samples enriched with MC-LR revealed strong matrix effects that reduce the MINA response to the analyte, thus suggesting the need for sample pretreatment methods in future development in this subject.

Greenificated Molecularly Imprinted Materials for Advanced Applications

Molecular imprinting technology (MIT) produces artificial binding sites with precise complementarity to substrates and thereby is capable of exquisite molecular recognition. Over five decades of evolution, it is predicted that the resulting host imprinted materials will overtake natural receptors for research and application purposes, but in practice, this has not yet been realized due to the unsustainability of their life cycles (i.e., precursors, creation, use, recycling, and end-of-life). To address this issue, greenificated molecularly imprinted polymers (GMIPs) are a new class of plastic antibodies that have approached sustainability by following one or more of the greenification principles, while also demonstrating more far-reaching applications compared to their natural counterparts. In this review, the most recent developments in the delicate design and advanced application of GMIPs in six fast-growing and emerging fields are surveyed, namely biomedicine/therapy, catalysis, energy harvesting/storage, nanoparticle detection, gas sensing/adsorption, and environmental remediation. In addition, their distinct features are highlighted, and the optimal means to utilize these features for attaining incredibly far-reaching applications are discussed. Importantly, the obscure technical challenges of the greenificated MIT are revealed, and conceivable solutions are offered. Lastly, several perspectives on future research directions are proposed.

The Evolution of Molecular Recognition: From Antibodies to Molecularly Imprinted Polymers (MIPs) as Artificial Counterpart

Molecular recognition is a useful property shared by various molecules, such as antibodies, aptamers and molecularly imprinted polymers (MIPs). It allows these molecules to be potentially involved in many applications including biological and pharmaceutical research, diagnostics, theranostics, therapy and drug delivery. Antibodies, naturally produced by plasma cells, have been exploited for this purpose, but they present noticeable drawbacks, above all production cost and time. Therefore, several research studies for similar applications have been carried out about MIPs and the main studies are reported in this review. MIPs, indeed, are more versatile and cost-effective than conventional antibodies, but the lack of toxicity studies and their scarce use for practical applications, make it that further investigations on this kind of molecules need to be conducted.

A biomimetic enzyme-linked immunosorbent assay (BELISA) for the analysis of gonadorelin by using molecularly imprinted polymer-coated microplates

An original biomimetic enzyme-linked immunoassay (BELISA) to target the small peptide hormone gonadorelin is presented. This peptide has been recently listed among the substances banned in sports by the World Antidoping Agency (WADA) since its misuse by male athletes triggers testosterone increase. Hence, in response to this emerging issue in anti-doping controls, we proposed BELISA which involves the growth of a polynorepinephrine (PNE)–based molecularly imprinted polymer (MIP) directly on microwells. PNE, a polydopamine (PDA) analog, has recently displayed impressive performances when it was exploited for MIP preparation, giving even better results than PDA. Gonadorelin quantification was accomplished via a colorimetric indirect competitive bioassay involving the competition between biotinylated gonadorelin linked to the signal reporter and the unlabeled analyte. These compete for the same MIP binding sites resulting in an inverse correlation between gonadorelin concentration and the output color signal (λ = 450 nm). A detection limit of 277 pmol L⁻¹ was achieved with very good reproducibility in standard solutions (_avCV% = 4.07%) and in urine samples (_avCV% = 5.24%). The selectivity of the assay resulted adequate for biological specimens and non-specific control peptides. In addition, the analytical figures of merit were successfully validated by mass spectrometry, the reference anti-doping benchtop platform for the analyte. BELISA was aimed to open real perspectives for PNE-based MIPs as alternatives to antibodies, especially when the target analyte is a poorly or non-immunogenic small molecule, such as gonadorelin.

基于氧化石墨烯气凝胶固相萃取柱检测有机磷农药

以氧化石墨烯气凝胶三维纳米材料作为固相萃取的吸附剂,结合高效液相色谱,对食品中的有机磷农药(辛硫磷、双硫磷、倍硫磷、杀螟硫磷)进行检测分析。首先,利用冷冻干燥的方式制备得到氧化石墨烯气凝胶,通过扫描电镜、红外光谱、比表面积吸附等一系列的实验手段对其形貌及物理特性进行了表征,证明其成功合成。从扫描电镜中可见石墨烯的层状褶皱结构,其表面积为740.51 m²/g。然后,将氧化石墨烯气凝胶直接填充于固相萃取柱中,在未借助任何硅胶等基体的条件下进行萃取研究;通过单因素实验,系统研究了萃取和洗脱条件对有机磷农药萃取回收率的影响。结果显示,在上样体积15 mL、样品溶液pH值4、上样速率1.0 mL/min、洗脱剂1.0 mL乙腈的条件下萃取回收率最高。与商用的萃取材料进行比较,包括碳十八硅胶柱(C18)、阴离子交换柱(SAX)、氨基柱(-NH₂)和硅酸镁柱(Florisil),氧化石墨烯气凝胶填充的固相萃取柱的萃取回收率有明显提高。实验考察了氧化石墨烯气凝胶直接填充的萃取柱的寿命,结果显示该萃取柱可以重复使用15次,可见解决了分散无基体支撑的石墨烯纳米片容易破碎、堵塞筛板的问题。与液相色谱联用建立分析方法,4种有机磷农药的线性范围较宽,辛硫磷、双硫磷和倍硫磷的线性范围为1~200 μg/L,杀螟硫磷的线性范围为2~200 μg/L,线性拟合良好(线性相关系数r²≥0.9949),检出限为0.2~0.5 μg/L,满足于我国和其他国家限定标准的检测。将该方法应用于实际样品,在苹果皮中未检测到有机磷农药,对其进行加标,回收率为70.5%~93.6%,相对标准偏差≤10.4%。

Modulation of Acetylcholinesterase Activity Using Molecularly Imprinted Polymer Nanoparticles

Modulation of enzyme activity allows for control over many biological pathways and while strategies for the pharmaceutical design of inhibitors are well established; methods for promoting activation, that is an...

A bifunctional immunosensor based on osmium nano-hydrangeas as a catalytic chromogenic and tinctorial signal output for folic acid detection

As a neglected member of the platinum group elements, osmium, the metal with the highest density in the earth, is very suitable for the preparation of a peroxidase with high catalytic activity and stability, and can also be associated with the development of a sensor. In this study, we accessed Os nano-hydrangeas (OsNHs) with one-pot synthesis and utilized them in a bifunctional immunosensor that can present both catalytic chromogenic and tinctorial signal for nanozyme-linked immunosorbent assay (NLISA) and lateral flow immunoassay (LFIA) for use in folic acid (FA) detection. In the OsNHs-NLISA, the linear range is from 9.42 to 167.53 ng mL^-1. The limit of detection (LOD) is 4.03 ng mL^-1 and the IC₅₀ value is 39.73 ng mL^-1. In OsNHs-LFIA, the visual cut-off value and limit of detection (v-LOD) are 100 ng mL^-1 and 0.01 ng mL^-1, respectively. Additionally, the outcome from the specificity and spiked sample analysis offered recovery from the spiked milk powder sample ranging from 93.9 to 103.6% with a coefficient of variation under 4.9%, compared with UPLC-MS/MS for a correlation of R² = 0.999 and admirable validation. The promising application of the OsNHs can also be used in other bioprobes, and this bifunctional immunosensor analysis mode is suitable for diversified analytes.

Enhanced Specific Mechanism of Separation by Polymeric Membrane Modification-A Short Review

Membrane technologies have found a significant application in separation processes in an exceeding range of industrial fields. The crucial part that is decided regarding the efficiency and effectivity of separation is the type of membrane. The membranes deal with separation problems, working under the various mechanisms of transportation of selected species. This review compares significant types of entrapped matter (ions, compounds, and particles) within membrane technology. The ion-exchange membranes, molecularly imprinted membranes, smart membranes, and adsorptive membranes are investigated. Here, we focus on the selective separation through the above types of membranes and detect their preparation methods. Firstly, the explanation of transportation and preparation of each type of membrane evaluated is provided. Next, the working and application phenomena are evaluated. Finally, the review discusses the membrane modification methods and briefly provides differences in the properties that occurred depending on the type of materials used and the modification protocol.

Recent advancements in the detection of organophosphate pesticides: a review

Organophosphorus pesticides (OPPs) are generally utilized for the protection of crops from pests. Because the use of OPPs in various agricultural operations has expanded dramatically, precise monitoring of their concentration levels has become the critical issue, which will help in the protection of ecological systems and food supply. However, the World Health Organization (WHO) has classified them as extremely dangerous chemical compounds. Taking their immense use and toxicity into consideration, the development of easy, rapid and highly sensitive techniques is necessary. Despite the fact that there are numerous conventional ways for detecting OPPs, the development of portable sensors is required to make routine analysis considerably more convenient. Some of these advanced techniques include colorimetric sensors, fluorescence sensors, molecular imprinted polymer-based sensors, and surface plasmon resonance-based sensors. This review article specifically focuses on the colorimetric, fluorescence and electrochemical sensors. In this article, the sensing strategies of these developed sensors, analytical conditions and their respective limit of detection are compiled.

A Review on Molecularly Imprinted Polymers Preparation by Computational Simulation-Aided Methods

Molecularly imprinted polymers (MIPs) are obtained by initiating the polymerization of functional monomers surrounding a template molecule in the presence of crosslinkers and porogens. The best adsorption performance can be achieved by optimizing the polymerization conditions, but this process is time consuming and labor-intensive. Theoretical calculation based on calculation simulations and intermolecular forces is an effective method to solve this problem because it is convenient, versatile, environmentally friendly, and inexpensive. In this article, computational simulation modeling methods are introduced, and the theoretical optimization methods of various molecular simulation calculation software for preparing molecularly imprinted polymers are proposed. The progress in research on and application of molecularly imprinted polymers prepared by computational simulations and computational software in the past two decades are reviewed. Computer molecular simulation methods, including molecular mechanics, molecular dynamics and quantum mechanics, are universally applicable for the MIP-based materials. Furthermore, the new role of computational simulation in the future development of molecular imprinting technology is explored.

Improved Solvothermal Synthesis of γ-Fe2O3 Magnetic Nanoparticles for SiO2 Coating

Monodisperse magnetic γ-Fe2O3 nanoparticles (MNPs) were prepared by a simple, improved, one-pot solvothermal synthesis using SDS and PEG 6000 as double capping reagents. This double protecting layer afforded better MNP uniformity (Z average 257 ± 11.12 nm, PDI = 0.18) and colloidal stability. Materials were characterized by DLS, SEM, TEM, XPS, and XRD. The use of these MNPs in the synthesis of core-shell structures with uniform and tunable silica coatings was demonstrated, as silica coated MNPs are important for use in a range of applications, including magnetic separation and catalysis and as platforms for templated nanogel synthesis.

A sensitive fluorescent assay for the determination of parathion-methyl using AHNSA probe with MnO2 nanosheets

In this paper, a novel fluorescence assay has been constructed for the determination of parathion-methyl (PM) by using 4-amino-3-hydroxy-1-naphthalenesulfonic acid (AHNSA) as probe. MnO₂ nanosheets (MnO₂ NS) could quench the fluorescence of AHNSA, while Mn²⁺, the reduction product of MnO₂ NS, has no influence on it, resulting in fluorescence recovery. This is because that MnO₂ NS have oxidized characteristic, and they can react with choline (TCh), which is the product of acetylthiocholine (ATCh) catalyzed by acetylcholinesterase (AChE). In the presence of OPs, the activity of AChE was inhibited, accompanied by the restraint of the redox reaction of MnO₂ NS, therefore the fluorescence of AHNSA was quenched. Under the optimized experimental conditions, a linear range of PM was determined to be 0.4-40 ng/mL (R² = 0.997) by the proposed method with the limit of detection for 0.18 ng/mL (S/N = 3). The assay was successfully applied to the determination of PM in lake water, which average recoveries were between 86.5% and 114.4%.

Rational Design of Molecularly Imprinted Polymers Using Quaternary Ammonium Cations for Glyphosate Detection

Molecularly imprinted polymers have emerged as cost-effective and rugged artificial selective sorbents for combination with different sensors. In this study, quaternary ammonium cations, as functional monomers, were systematically evaluated to design imprinted polymers for glyphosate as an important model compound for electrically charged and highly water-soluble chemical compounds. To this aim, a small pool of monomers were used including (3-acrylamidopropyl)trimethylammonium chloride, [2-(acryloyloxy)ethyl]trimethylammonium chloride, and diallyldimethylammonium chloride. The simultaneous interactions between three positively charged monomers and glyphosate were preliminary evaluated using statistical design of the experiment method. Afterwards, different polymers were synthesized at the gold surface of the quartz crystal microbalance sensor using optimized and not optimized glyphosate-monomers ratios. All synthesized polymers were characterized using atomic force microscopy, contact angle, Fourier-transform infrared, and X-ray photoelectron spectroscopy. Evaluated functional monomers showed promise as highly efficient functional monomers, when they are used together and at the optimized ratio, as predicted by the statistical method. Obtained results from the modified sensors were used to develop a simple model describing the binding characteristics at the surface of the different synthesized polymers. This model helps to develop new synthesis strategies for rational design of the highly selective imprinted polymers and to use as a sensing platform for water soluble and polar targets.

Cloud-point extraction associated with voltammetry: preconcentration and elimination of the sample matrix for trace determination of methyl parathion in honey

This work presents the association of cloud point extraction (CPE) and electroanalysis for the selective and sensitive determination of methyl parathion (MP) in honey. The CPE step provided the pre-concentration of MP from a complex sample, in which the optimized extraction parameters (Triton X-100 concentration of 0.75% w/v, NaCl concentration of 1.0% w/v and heating time of 30 min) were investigated using a factorial design (23). The detection of MP was performed using a cathodically pre-treated boron-doped diamond (BDD) working electrode and square wave voltammetry (SWV), after a suitable dilution of the CPE extract in Britton-Robinson buffer pH 6.0 as the supporting electrolyte. MP presented three electrochemical processes over the BDD surface, but only the reduction peak at around -0.7 V was monitored for the MP determination (higher detectability). Improved reproducibility was reached by applying an in situ cleaning step (+2.0 V for 15 s) followed by a re-activation process (-2.0 V for 15 s) between measurements. Using the optimized variables, a linear range between 0.1 and 2.0 μmol L-1 was obtained for MP with a limit of detection of 0.006 μmol L-1, a 6-fold lower value when compared with the value attained without the CPE step. The experimental enrichment factor of MP was 6.1. Also, the optimized CPE allowed the determination of MP in honey samples with good accuracy (recovery between 94 and 106%), which was not possible using direct detection (without CPE) due to the matrix interference. This is the first paper that demonstrates the combination of CPE and electroanalysis for the determination of an organic compound.

Generic sensor platform based on electro-responsive molecularly imprinted polymer nanoparticles (e-NanoMIPs)

The present research describes the design of robust electrochemical sensors based on electro-responsive molecularly imprinted polymer nanoparticles (e-MIPs). The e-MIPs, tagged with a redox probe, combine both recognition and reporting functions. This system replaces enzyme-mediator pairs used in traditional biosensors. The analyte recognition process relies on the generic actuation phenomenon when the polymer conformation of e-MIPs is changing in response to the presence of the template analyte. The analyte concentration is measured using voltammetric methods. In an exemplification of this technology, electrochemical sensors were developed for the determination of concentrations of trypsin, glucose, paracetamol, C4-homoserine lactone, and THC. The present technology allows for the possibility of producing generic, inexpensive, and robust disposable sensors for clinical, environmental, and forensic applications.

Analytical methods to analyze pesticides and herbicides

This paper reviews studies published in 2019, in the area of analytical techniques for determination of pesticides and herbicides. It should be noted that some of the reports summarized in this review are not directly related to but could potentially be used for water environment studies. Based on different methods, the literatures are organized into six sections, namely extraction methods, electrochemical techniques, spectrophotometric techniques, chemiluminescence and fluorescence methods, chromatographic and mass spectrometric techniques, and biochemical assays. PRACTITIONER POINTS: Totally 141 research articles have been summarized. The review is divided into six parts. Chromatographic and mass spectrometric techniques are the most widely used methods.

Towards Peptide and Protein Recognition by Antibody Mimicking Synthetic Polymers – Background, State of the Art, and Future Outlook

Antibody–peptide/protein interactions are instrumental for many processes in the pharmaceutical and biotechnology industries and as tools for biomedical and biochemical research. The recent development of molecularly imprinted polymer nanoparticles displaying antibody-like recognition of peptides and proteins offers the possibility for substituting antibodies with these robust materials for applications where the structural integrity and function of antibodies is compromised by temperature, pH, solvent, etc. The background to the development of this class of antibody-mimicking material and the state-of-the-art in their synthesis and application is presented in this review.

Strategies for Molecular Imprinting and the Evolution of MIP Nanoparticles as Plastic Antibodies-Synthesis and Applications

Materials that can mimic the molecular recognition-based functions found in biology are a significant goal for science and technology. Molecular imprinting is a technology that addresses this challenge by providing polymeric materials with antibody-like recognition characteristics. Recently, significant progress has been achieved in solving many of the practical problems traditionally associated with molecularly imprinted polymers (MIPs), such as difficulties with imprinting of proteins, poor compatibility with aqueous environments, template leakage, and the presence of heterogeneous populations of binding sites in the polymers that contribute to high levels of non-specific binding. This success is closely related to the technology-driven shift in MIP research from traditional bulk polymer formats into the nanomaterial domain. The aim of this article is to throw light on recent developments in this field and to present a critical discussion of the current state of molecular imprinting and its potential in real world applications.

Click Reaction-Mediated T2 Immunosensor for Ultrasensitive Detection of Pesticide Residues via Brush-like Nanostructure-Triggered Coordination Chemistry

We develop an ultrasensitive T₂-mediated immunosensor based on the coordination chemistry and Cu(I)-catalyzed 1,3-dipolar cycloaddition of azide andalkyne (CuAAC) and apply it for the detection of pesticide residues. We functionalize polyglutamic acid (PGA) on polystyrene to form a brush-like nanostructure that has a large loading capacity of Cu(II) through the coordination chemistry between PGA and Cu(II). Such a brush-like nanostructure could be used to chelate Cu(II) to modulate the CuAAC between azide-functionalized 1000 nm polystyrene (PS₁₀₀₀) and alkyne-functionalized 30 nm magnetic nanoparticles (MNP₃₀), and the MNP₃₀-PS₁₀₀₀ conjugate as a product of CuAAC can act as a magnetic probe in this T₂-based immunosensor. This click chemistry and coordination chemistry-mediated immunosensor allows for an ultrasensitive detection for chlorpyrifos residue (0.022 ng/mL), a 58-fold enhancement compared with that of enzyme-linked immunosorbent assay (1.28 ng/mL), providing a promising platform for detection of trace small molecules.