1
|
Clarke TB, Krushinski LE, Vannoy KJ, Colón-Quintana G, Roy K, Rana A, Renault C, Hill ML, Dick JE. Single Entity Electrocatalysis. Chem Rev 2024. [PMID: 39018111 DOI: 10.1021/acs.chemrev.3c00723] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 07/19/2024]
Abstract
Making a measurement over millions of nanoparticles or exposed crystal facets seldom reports on reactivity of a single nanoparticle or facet, which may depart drastically from ensemble measurements. Within the past 30 years, science has moved toward studying the reactivity of single atoms, molecules, and nanoparticles, one at a time. This shift has been fueled by the realization that everything changes at the nanoscale, especially important industrially relevant properties like those important to electrocatalysis. Studying single nanoscale entities, however, is not trivial and has required the development of new measurement tools. This review explores a tale of the clever use of old and new measurement tools to study electrocatalysis at the single entity level. We explore in detail the complex interrelationship between measurement method, electrocatalytic material, and reaction of interest (e.g., carbon dioxide reduction, oxygen reduction, hydrazine oxidation, etc.). We end with our perspective on the future of single entity electrocatalysis with a key focus on what types of measurements present the greatest opportunity for fundamental discovery.
Collapse
Affiliation(s)
- Thomas B Clarke
- Department of Chemistry, Purdue University, West Lafayette, Indiana 47907, United States
| | - Lynn E Krushinski
- Department of Chemistry, Purdue University, West Lafayette, Indiana 47907, United States
| | - Kathryn J Vannoy
- Department of Chemistry, Purdue University, West Lafayette, Indiana 47907, United States
| | | | - Kingshuk Roy
- Department of Chemistry, Purdue University, West Lafayette, Indiana 47907, United States
| | - Ashutosh Rana
- Department of Chemistry, Purdue University, West Lafayette, Indiana 47907, United States
| | - Christophe Renault
- Department of Chemistry and Biochemistry, Loyola University Chicago, Chicago, Illinois 60660, United States
| | - Megan L Hill
- Department of Chemistry, Purdue University, West Lafayette, Indiana 47907, United States
| | - Jeffrey E Dick
- Department of Chemistry, Purdue University, West Lafayette, Indiana 47907, United States
- Elmore Family School of Electrical and Computer Engineering, Purdue University, West Lafayette, Indiana 47907, United States
| |
Collapse
|
2
|
Babar M, Viswanathan V. Modeling Scanning Electrochemical Cell Microscopy (SECCM) in Twisted Bilayer Graphene. J Phys Chem Lett 2024:7371-7378. [PMID: 38995158 DOI: 10.1021/acs.jpclett.4c01002] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 07/13/2024]
Abstract
Twisted 2D-flat band materials host exotic quantum phenomena and novel moiré patterns, showing immense promise for advanced spintronic and quantum applications. Here, we evaluate the nanostructure-activity relationship in twisted bilayer graphene by modeling it under the scanning electrochemical cell microscopy setup to resolve its spatial moiré domains. We solve the steady state ion transport inside a 3D nanopipette to isolate the current response at AA and AB domains. Interfacial reaction rates are obtained from a modified Marcus-Hush-Chidsey theory combining input from a tight binding model that describes the electronic structure of bilayer graphene. High rates of redox exchange are observed at the AA domains, an effect that reduces with diminished flat bands or a larger cross-sectional area of the nanopipette. Using voltammograms, we identify an optimal voltage that maximizes the current difference between the domains. Our study lays down the framework to electrochemically capture prominent features of the band structure that arise from spatial domains and deformations in 2D flat-band materials.
Collapse
Affiliation(s)
- Mohammad Babar
- Department of Mechanical Engineering, University of Michigan, Ann Arbor, Michigan 48109, United States
- Department of Mechanical Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania 15213, United States
| | - Venkatasubramanian Viswanathan
- Department of Mechanical Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania 15213, United States
- Department of Aerospace Engineering, University of Michigan, Ann Arbor, Michigan 48109, United States
| |
Collapse
|
3
|
Gaudin LF, Wright IR, Harris-Lee TR, Jayamaha G, Kang M, Bentley CL. Five years of scanning electrochemical cell microscopy (SECCM): new insights and innovations. NANOSCALE 2024; 16:12345-12367. [PMID: 38874335 DOI: 10.1039/d4nr00859f] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2024]
Abstract
Scanning electrochemical cell microscopy (SECCM) is a nanopipette-based technique which enables measurement of localised electrochemistry. SECCM has found use in a wide range of electrochemical applications, and due to the wider uptake of this technique in recent years, new applications and techniques have been developed. This minireview has collected all SECCM research articles published in the last 5 years, to demonstrate and celebrate the recent advances, and to make it easier for SECCM researchers to remain well-informed. The wide range of SECCM applications is demonstrated, which are categorised here into electrocatalysis, electroanalysis, photoelectrochemistry, biological materials, energy storage materials, corrosion, electrosynthesis, and instrumental development. In the collection of this library of SECCM studies, a few key trends emerge. (1) The range of materials and processes explored with SECCM has grown, with new applications emerging constantly. (2) The instrumental capabilities of SECCM have grown, with creative techniques being developed from research groups worldwide. (3) The SECCM research community has grown significantly, with adoption of the SECCM technique becoming more prominent.
Collapse
Affiliation(s)
- Lachlan F Gaudin
- School of Chemistry, Monash University, Clayton, 3800 VIC, Australia.
| | - India R Wright
- School of Chemistry, Monash University, Clayton, 3800 VIC, Australia.
| | - Thom R Harris-Lee
- School of Chemistry, Monash University, Clayton, 3800 VIC, Australia.
- Department of Chemistry, University of Bath, Claverton Down, Bath, UK
| | - Gunani Jayamaha
- School of Chemistry, University of Sydney, Camperdown, 2050 NSW, Australia
| | - Minkyung Kang
- School of Chemistry, University of Sydney, Camperdown, 2050 NSW, Australia
| | - Cameron L Bentley
- School of Chemistry, Monash University, Clayton, 3800 VIC, Australia.
| |
Collapse
|
4
|
Harris-Lee TR, Turvey T, Jayamaha G, Kang M, Marken F, Johnson AL, Zhang J, Bentley CL. Optimizing Amorphous Molybdenum Sulfide Thin Film Electrocatalysts: Trade-Off between Specific Activity and Microscopic Porosity. ACS APPLIED MATERIALS & INTERFACES 2024; 16:33620-33632. [PMID: 38888466 DOI: 10.1021/acsami.4c06308] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/20/2024]
Abstract
Amorphous molybdenum sulfide (a-MoSx) is a promising candidate to replace noble metals as electrocatalysts for the hydrogen evolution reaction (HER) in electrochemical water splitting. So far, understanding of the activity of a-MoSx in relation to its physical (e.g., porosity) and chemical (e.g., Mo/S bonding environments) properties has mostly been derived from bulk electrochemical measurements, which provide limited information about electrode materials that possess microscopic structural heterogeneities. To overcome this limitation, herein, scanning electrochemical cell microscopy (SECCM) has been deployed to characterize the microscopic electrochemical activity of a-MoSx thin films (ca. 200 nm thickness), which possess a significant three-dimensional structure (i.e., intrinsic porosity) when produced by electrodeposition. A novel two-step SECCM protocol is designed to quantitatively determine spatially resolved electrochemical activity and electrochemical surface area (ECSA) within a single, high-throughput measurement. It is shown for the first time that although the highest surface area (e.g., most porous) regions of the a-MoSx film possess the highest total activity (measured by the electrochemical current), they do not possess the highest specific activity (measured by the ECSA-normalized current density). Instead, the areas of highest specific activity are localized at/around circular structures, coined "pockmarks", which are tens to hundreds of micrometers in size and ubiquitous to a-MoSx films produced by electrodeposition. By coupling this technique with structural and elemental composition analysis techniques (scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy) and correlating ECSA with activity and specific activity across SECCM scans, this work furthers the understanding of structure-activity relations in a-MoSx and highlights the importance of local measurements for the systematic and rational design of thin film catalyst materials.
Collapse
Affiliation(s)
- Thom R Harris-Lee
- Department of Chemistry, University of Bath, Claverton Down, Bath BA2 7AY, U.K
- School of Chemistry, Monash University, Clayton VIC 3800, Australia
| | - Tom Turvey
- School of Chemistry, Monash University, Clayton VIC 3800, Australia
| | - Gunani Jayamaha
- School of Chemistry, University of Sydney, Sydney NSW 2006, Australia
| | - Minkyung Kang
- School of Chemistry, University of Sydney, Sydney NSW 2006, Australia
| | - Frank Marken
- Department of Chemistry, University of Bath, Claverton Down, Bath BA2 7AY, U.K
| | - Andrew L Johnson
- Department of Chemistry, University of Bath, Claverton Down, Bath BA2 7AY, U.K
| | - Jie Zhang
- School of Chemistry, Monash University, Clayton VIC 3800, Australia
| | | |
Collapse
|
5
|
Zhang L, Wahab OJ, Jallow AA, O’Dell ZJ, Pungsrisai T, Sridhar S, Vernon KL, Willets KA, Baker LA. Recent Developments in Single-Entity Electrochemistry. Anal Chem 2024; 96:8036-8055. [PMID: 38727715 PMCID: PMC11112546 DOI: 10.1021/acs.analchem.4c01406] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/22/2024]
Affiliation(s)
- L. Zhang
- Department
of Chemistry, Texas A&M University, College Station, Texas 77845, United States
| | - O. J. Wahab
- Department
of Chemistry, Texas A&M University, College Station, Texas 77845, United States
| | - A. A. Jallow
- Department
of Chemistry, Texas A&M University, College Station, Texas 77845, United States
| | - Z. J. O’Dell
- Department
of Chemistry, Temple University, Philadelphia, Pennsylvania 19122, United States
| | - T. Pungsrisai
- Department
of Chemistry, Temple University, Philadelphia, Pennsylvania 19122, United States
| | - S. Sridhar
- Department
of Chemistry, Temple University, Philadelphia, Pennsylvania 19122, United States
| | - K. L. Vernon
- Department
of Chemistry, Texas A&M University, College Station, Texas 77845, United States
| | - K. A. Willets
- Department
of Chemistry, Temple University, Philadelphia, Pennsylvania 19122, United States
| | - L. A. Baker
- Department
of Chemistry, Texas A&M University, College Station, Texas 77845, United States
| |
Collapse
|
6
|
Gaudin LF, Funston AM, Bentley CL. Drop-cast gold nanoparticles are not always electrocatalytically active for the borohydride oxidation reaction. Chem Sci 2024; 15:7243-7258. [PMID: 38756820 PMCID: PMC11095372 DOI: 10.1039/d4sc00676c] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/29/2024] [Accepted: 04/11/2024] [Indexed: 05/18/2024] Open
Abstract
The next-generation of energy devices rely on advanced catalytic materials, especially electrocatalytic nanoparticles (NPs), to achieve the performance and cost required to reshape the energy landscape towards a more sustainable and cleaner future. It has become imperative to maximize the performance of the catalyst, both through improvement of the intrinsic activity of the NP, and by ensuring all particles are performing at the level of their capability. This requires not just a structure-function understanding of the catalytic material, but also an understanding of how the catalyst performance is impacted by its environment (substrate, ligand, etc.). The intrinsic activity and environment of catalytic particles on a support may differ wildly by particle, thus it is essential to build this understanding from a single-entity perspective. To achieve this herein, scanning electrochemical cell microscopy (SECCM) has been used, which is a droplet-based scanning probe technique which can encapsulate single NPs, and apply a voltage to the nanoparticle whilst measuring its resulting current. Using SECCM, single AuNPs have been encapsulated, and their activity for the borohydride oxidation reaction (BOR) is measured. A total of 268 BOR-active locations were probed (178 single particles) and a series of statistical analyses were performed in order to make the following discoveries: (1) a certain percentage of AuNPs display no BOR activity in the SECCM experiment (67.4% of single NPs), (2) visibly-similar particles display wildly varied BOR activities which cannot be explained by particle size, (3) the impact of cluster size (#NP at a single location) on a selection of diagnostic electrochemical parameters can be easily probed with SECCM, (4) exploratory statistical correlation between these parameters can be meaningfully performed with SECCM, and (5) outlying "abnormal" NP responses can be probed on a particle-by-particle basis. Each one of these findings is its own worthwhile study, yet this has been achieved with a single SECCM scan. It is hoped that this research will spur electrochemists and materials scientists to delve deeper into their substantial datasets in order to enhance the structure-function understanding, to bring about the next generation of high-performance electrocatalysts.
Collapse
Affiliation(s)
- Lachlan F Gaudin
- School of Chemistry, Monash University Clayton 3800 VIC Australia
| | - Alison M Funston
- School of Chemistry, Monash University Clayton 3800 VIC Australia
- ARC Centre of Excellence in Exciton Science, Monash University Clayton 3800 VIC Australia
| | | |
Collapse
|
7
|
Askarova G, Barman K, Mirkin MV. Quantitative Measurements of Electrocatalytic Reaction Rates with NanoSECM. Anal Chem 2024; 96:6089-6095. [PMID: 38574269 DOI: 10.1021/acs.analchem.4c01019] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/06/2024]
Abstract
Scanning electrochemical microscopy (SECM) has been extensively used for mapping electrocatalytic surface reactivity; however, most of the studies were carried out using micrometer-sized tips, and no quantitative kinetic experiments on the nanoscale have yet been reported to date. As the diffusion-limited current density at a nanometer-sized electrode is very high, an inner-sphere electron-transfer process occurring at a nanotip typically produces a kinetic current at any attainable overpotential. Here, we develop a theory for substrate generation/tip collection (SG/TC) and feedback modes of SECM with a kinetic tip current and use it to evaluate the rates of hydrogen and oxygen evolution reactions in a neutral aqueous solution from the current-distance curves. The possibility of using chemically modified nanotips for kinetic measurements is also demonstrated. The effect of the substrate size on the shape of the current-distance curves in SG/TC mode SECM experiments is discussed.
Collapse
Affiliation(s)
- Gaukhar Askarova
- Department of Chemistry and Biochemistry, Queens College, Flushing, New York 11367, United States
- The Graduate Center of CUNY, New York, New York 10016, United States
| | - Koushik Barman
- Department of Chemistry and Biochemistry, Queens College, Flushing, New York 11367, United States
| | - Michael V Mirkin
- Department of Chemistry and Biochemistry, Queens College, Flushing, New York 11367, United States
- Advanced Science Research Center at The Graduate Center, CUNY, New York, New York 10031, United States
| |
Collapse
|
8
|
Poderyte M, Ramanavicius A, Valiūnienė A. Exploring the Living Cell: Applications and Advances of Scanning Electrochemical Microscopy. Crit Rev Anal Chem 2024:1-12. [PMID: 38557222 DOI: 10.1080/10408347.2024.2328135] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/04/2024]
Abstract
A living cell is a complex network of molecular, biochemical and physiological processes. Cellular activities, such as ion transport, metabolic processes, and cell-cell interactions can be determined electrochemically by detecting the electrons or ions exchanged in these processes. Electrochemical methods often are noninvasive, and they can enable the real-time monitoring of cellular processes. Scanning electrochemical microscopy (SECM) is an advanced scanning probe electroanalysis technique that can map the surface topography and local reactivity of a substrate with high precision at the micro- or nanoscale. By measuring electrochemical signals, such as redox reactions, ion fluxes, and pH changes, SECM can provide valuable insights into cellular activity. As a result of its compatibility with liquid medium measurements and its nondestructive nature, SECM has gained popularity in living cell research. This review aims to furnish an overview of SECM, elucidating its principles, applications, and its potential to contribute significantly to advancements in cell biology, electroporation, and biosensors. As a multidisciplinary tool, SECM is distinguished by its ability to unravel the intricacies of living cells and offers promising avenues for breakthroughs in our understanding of cellular complexity.
Collapse
Affiliation(s)
- Margarita Poderyte
- Faculty of Chemistry and Geosciences, Institute of Chemistry, Vilnius University, Vilnius, Lithuania
| | - Arunas Ramanavicius
- Faculty of Chemistry and Geosciences, Institute of Chemistry, Vilnius University, Vilnius, Lithuania
- Laboratory of Nanotechnology, State Research Institute Centre of Physical Sciences and Technology, Vilnius, Lithuania
| | - Aušra Valiūnienė
- Faculty of Chemistry and Geosciences, Institute of Chemistry, Vilnius University, Vilnius, Lithuania
- State Research Institute Center for Physical Sciences and Technology, Vilnius, Lithuania
| |
Collapse
|
9
|
Lu SM, Vannoy KJ, Dick JE, Long YT. Multiphase Chemistry under Nanoconfinement: An Electrochemical Perspective. J Am Chem Soc 2023; 145:25043-25055. [PMID: 37934860 DOI: 10.1021/jacs.3c07374] [Citation(s) in RCA: 8] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2023]
Abstract
Most relevant systems of interest to modern chemists rarely consist of a single phase. Real-world problems that require a rigorous understanding of chemical reactivity in multiple phases include the development of wearable and implantable biosensors, efficient fuel cells, single cell metabolic characterization techniques, and solar energy conversion devices. Within all of these systems, confinement effects at the nanoscale influence the chemical reaction coordinate. Thus, a fundamental understanding of the nanoconfinement effects of chemistry in multiphase environments is paramount. Electrochemistry is inherently a multiphase measurement tool reporting on a charged species traversing a phase boundary. Over the past 50 years, electrochemistry has witnessed astounding growth. Subpicoampere current measurements are routine, as is the study of single molecules and nanoparticles. This Perspective focuses on three nanoelectrochemical techniques to study multiphase chemistry under nanoconfinement: stochastic collision electrochemistry, single nanodroplet electrochemistry, and nanopore electrochemistry.
Collapse
Affiliation(s)
- Si-Min Lu
- State Key Laboratory of Analytical Chemistry for Life Science, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing 210023, P.R. China
| | - Kathryn J Vannoy
- Department of Chemistry, Elmore Family School of Electrical and Computer Engineering, Purdue University, West Lafayette, Indiana 47907, United States
| | - Jeffrey E Dick
- Department of Chemistry, Elmore Family School of Electrical and Computer Engineering, Purdue University, West Lafayette, Indiana 47907, United States
| | - Yi-Tao Long
- State Key Laboratory of Analytical Chemistry for Life Science, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing 210023, P.R. China
| |
Collapse
|
10
|
Kawashima K, Márquez RA, Smith LA, Vaidyula RR, Carrasco-Jaim OA, Wang Z, Son YJ, Cao CL, Mullins CB. A Review of Transition Metal Boride, Carbide, Pnictide, and Chalcogenide Water Oxidation Electrocatalysts. Chem Rev 2023. [PMID: 37967475 DOI: 10.1021/acs.chemrev.3c00005] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2023]
Abstract
Transition metal borides, carbides, pnictides, and chalcogenides (X-ides) have emerged as a class of materials for the oxygen evolution reaction (OER). Because of their high earth abundance, electrical conductivity, and OER performance, these electrocatalysts have the potential to enable the practical application of green energy conversion and storage. Under OER potentials, X-ide electrocatalysts demonstrate various degrees of oxidation resistance due to their differences in chemical composition, crystal structure, and morphology. Depending on their resistance to oxidation, these catalysts will fall into one of three post-OER electrocatalyst categories: fully oxidized oxide/(oxy)hydroxide material, partially oxidized core@shell structure, and unoxidized material. In the past ten years (from 2013 to 2022), over 890 peer-reviewed research papers have focused on X-ide OER electrocatalysts. Previous review papers have provided limited conclusions and have omitted the significance of "catalytically active sites/species/phases" in X-ide OER electrocatalysts. In this review, a comprehensive summary of (i) experimental parameters (e.g., substrates, electrocatalyst loading amounts, geometric overpotentials, Tafel slopes, etc.) and (ii) electrochemical stability tests and post-analyses in X-ide OER electrocatalyst publications from 2013 to 2022 is provided. Both mono and polyanion X-ides are discussed and classified with respect to their material transformation during the OER. Special analytical techniques employed to study X-ide reconstruction are also evaluated. Additionally, future challenges and questions yet to be answered are provided in each section. This review aims to provide researchers with a toolkit to approach X-ide OER electrocatalyst research and to showcase necessary avenues for future investigation.
Collapse
Affiliation(s)
- Kenta Kawashima
- Department of Chemistry, The University of Texas at Austin, Austin, Texas 78712, United States
| | - Raúl A Márquez
- Department of Chemistry, The University of Texas at Austin, Austin, Texas 78712, United States
| | - Lettie A Smith
- Department of Chemistry, The University of Texas at Austin, Austin, Texas 78712, United States
| | - Rinish Reddy Vaidyula
- Department of Chemistry, The University of Texas at Austin, Austin, Texas 78712, United States
| | - Omar A Carrasco-Jaim
- McKetta Department of Chemical Engineering, The University of Texas at Austin, Austin, Texas 78712, United States
| | - Ziqing Wang
- Department of Chemistry, The University of Texas at Austin, Austin, Texas 78712, United States
| | - Yoon Jun Son
- McKetta Department of Chemical Engineering, The University of Texas at Austin, Austin, Texas 78712, United States
| | - Chi L Cao
- McKetta Department of Chemical Engineering, The University of Texas at Austin, Austin, Texas 78712, United States
| | - C Buddie Mullins
- Department of Chemistry, The University of Texas at Austin, Austin, Texas 78712, United States
- McKetta Department of Chemical Engineering, The University of Texas at Austin, Austin, Texas 78712, United States
- Center for Electrochemistry, The University of Texas at Austin, Austin, Texas 78712, United States
- H2@UT, The University of Texas at Austin, Austin, Texas 78712, United States
| |
Collapse
|
11
|
Fan Y, Walls M, Salzemann C, Noël JM, Kanoufi F, Courty A, Lemineur JF. Metal Core-Shell Nanoparticle Supercrystals: From Photoactivation of Hydrogen Evolution to Photocorrosion. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2305402. [PMID: 37492940 DOI: 10.1002/adma.202305402] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/06/2023] [Revised: 07/19/2023] [Indexed: 07/27/2023]
Abstract
Gas nanobubbles are directly linked to many important chemical reactions. While they can be detrimental to operational devices, they also reflect the local activity at the nanoscale. Here, supercrystals made of highly monodisperse Ag@Pt core-shell nanoparticles are first grown onto a solid support and fully characterized by electron microscopies and X-ray scattering. Supercrystals are then used as a plasmonic photocatalytic platform for triggering the hydrogen evolution reaction. The catalytic activity is measured operando at the single supercrystal level by high-resolution optical microscopy, which allows gas nanobubble nucleation to be probed at the early stage with high temporal resolution and the amount of gas molecules trapped inside them to be quantified. Finally, a correlative microscopy approach and high-resolution electron energy loss spectroscopy help to decipher the mechanisms at the origin of the local degradation of the supercrystals during catalysis, namely nanoscale erosion and corrosion.
Collapse
Affiliation(s)
- Yinan Fan
- MONARIS, Sorbonne Université, CNRS, UMR 8233, 4 Place Jussieu, Paris, 75005, France
| | - Michael Walls
- Laboratoire de Physique des Solides, Université Paris-Saclay, CNRS, Orsay, 91405, France
| | - Caroline Salzemann
- MONARIS, Sorbonne Université, CNRS, UMR 8233, 4 Place Jussieu, Paris, 75005, France
| | - Jean-Marc Noël
- ITODYS, Université Paris Cité, CNRS, Paris, F-75013, France
| | | | - Alexa Courty
- MONARIS, Sorbonne Université, CNRS, UMR 8233, 4 Place Jussieu, Paris, 75005, France
| | | |
Collapse
|
12
|
Godeffroy L, Shkirskiy V, Noël JM, Lemineur JF, Kanoufi F. Fuelling electrocatalysis at a single nanoparticle by ion flow in a nanoconfined electrolyte layer. Faraday Discuss 2023; 246:441-465. [PMID: 37427498 DOI: 10.1039/d3fd00032j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/13/2023]
Abstract
We explore the possibility of coupling the transport of ions and water in a nanochannel with the chemical transformation of a reactant at an individual catalytic nanoparticle (NP). Such configuration could be interesting for constructing artificial photosynthesis devices coupling the asymmetric production of ions at the catalytic NP, with the ion selectivity of the nanochannels acting as ion pumps. Herein we propose to observe how such ion pumping can be coupled to an electrochemical reaction operated at the level of an individual electrocatalytic Pt NP. This is achieved by confining a (reservoir) droplet of electrolyte to within a few micrometres away from an electrocatalytic Pt NP on an electrode. While the region of the electrode confined by the reservoir and the NP are cathodically polarised, operando optical microscopy reveals the growth of an electrolyte nanodroplet on top of the NP. This suggests that the electrocatalysis of the oxygen reduction reaction operates at the NP and that an electrolyte nanochannel is formed - acting as an ion pump - between the reservoir and the NP. We have described here the optically imaged phenomena and their relevance to the characterization of the electrolyte nanochannel linking the NPs to the electrolyte microreservoir. Additionally, we have addressed the capacity of the nanochannel to transport ions and solvent flow to the NP.
Collapse
Affiliation(s)
| | | | - Jean-Marc Noël
- Université Paris Cité, CNRS, ITODYS, F-75013 Paris, France.
| | | | | |
Collapse
|
13
|
Peng Y, Gao C, Deng X, Zhao J, Chen Q. Elucidating the Geometric Active Sites for Oxygen Evolution Reaction on Crystalline Iron-Substituted Cobalt Hydroxide Nanoplates. Anal Chem 2023. [PMID: 37490501 DOI: 10.1021/acs.analchem.3c01420] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 07/27/2023]
Abstract
Transition-metal (oxy)hydroxides are among the most active and studied catalysts for the oxygen evolution reaction in alkaline electrolytes. However, the geometric distribution of active sites is still elusive. Here, using the well-defined crystalline iron-substituted cobalt hydroxide as a model catalyst, we reported the scanning electrochemical cell microscopy (SECCM) study of single-crystalline nanoplates, where the oxygen evolution reaction at individual nanoplates was isolated and evaluated independently. With integrated prior- and post-SECCM scanning electron microscopy of the catalyst morphology, correlated structure-activity information of individual electrocatalysts was obtained. Our result reveals that while the active sites are largely located at the edges of the pristine Co(OH)2 nanoplates, the Fe lattice incorporation significantly promotes the basal plane activities. Our approach of correlative imaging provides new insights into the effect of iron incorporation on active site distribution across nano-electrocatalysts.
Collapse
Affiliation(s)
- Yu Peng
- Key Lab of Science and Technology of Eco-Textile, Ministry of Education, College of Chemistry and Chemical Engineering, Donghua University, Shanghai 201620, P. R. China
| | - Cong Gao
- Key Lab of Science and Technology of Eco-Textile, Ministry of Education, College of Chemistry and Chemical Engineering, Donghua University, Shanghai 201620, P. R. China
| | - Xiaoli Deng
- Key Lab of Science and Technology of Eco-Textile, Ministry of Education, College of Chemistry and Chemical Engineering, Donghua University, Shanghai 201620, P. R. China
| | - Jiao Zhao
- Key Lab of Science and Technology of Eco-Textile, Ministry of Education, College of Chemistry and Chemical Engineering, Donghua University, Shanghai 201620, P. R. China
| | - Qianjin Chen
- Key Lab of Science and Technology of Eco-Textile, Ministry of Education, College of Chemistry and Chemical Engineering, Donghua University, Shanghai 201620, P. R. China
| |
Collapse
|
14
|
Jin R, Zhou W, Xu Y, Jiang D, Fang D. Electrochemical Visualization of Membrane Proteins in Single Cells at a Nanoscale Using Scanning Electrochemical Cell Microscopy. Anal Chem 2023. [PMID: 37358933 DOI: 10.1021/acs.analchem.3c00114] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/28/2023]
Abstract
The electrochemical visualization of proteins in the plasma membrane of single fixed cells was achieved with a spatial resolution of 160 nm using scanning electrochemical cell microscopy. The model protein, the carcinoembryonic antigen (CEA), is linked with a ruthenium complex (Ru(bpy)32+)-tagged antibody, which exhibits redox peaks in its cyclic voltammetry curves after a nanopipette tip contacts the cellular membrane. Based on the potential-resolved oxidation or reduction currents, an uneven distribution of membrane CEAs on the cells is electrochemically visualized, which could only be achieved previously using super-resolution optical microscopy. Compared with current electrochemical microscopy, the single-cell scanning electrochemical cell microscopy (SECCM) strategy not only improves the spatial resolution but also utilizes the potential-resolved current from the antibody-antigen complex to increase electrochemical imaging accuracy. Eventually, the electrochemical visualization of cellular proteins at the nanoscale enables the super-resolution study of cells to provide more biological information.
Collapse
Affiliation(s)
- Rong Jin
- School of Pharmacy, Nanjing Medical University, Nanjing, Jiangsu 211126, China
- State Key Laboratory of Analytical Chemistry for Life Science, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing 210023, China
| | - Wenting Zhou
- School of Pharmacy, Nanjing Medical University, Nanjing, Jiangsu 211126, China
| | - Yanyan Xu
- School of Pharmacy, Nanjing Medical University, Nanjing, Jiangsu 211126, China
- State Key Laboratory of Analytical Chemistry for Life Science, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing 210023, China
| | - Dechen Jiang
- State Key Laboratory of Analytical Chemistry for Life Science, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing 210023, China
| | - Danjun Fang
- School of Pharmacy, Nanjing Medical University, Nanjing, Jiangsu 211126, China
| |
Collapse
|
15
|
Godeffroy L, Makogon A, Gam Derouich S, Kanoufi F, Shkirskiy V. Imaging and Quantifying the Chemical Communication between Single Particles in Metal Alloys. Anal Chem 2023. [PMID: 37327768 DOI: 10.1021/acs.analchem.3c01258] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
The communication within particle agglomerates in industrial alloys can have a significant impact on the macroscopic reactivity, putting a high demand on the adaptation of wide-field methodologies to clarify this phenomenon. In this work, we report the application of correlated optical microscopies probing operando both local pH and local surface chemical transformation correlated with identical location scanning electron microscopy to quantify in situ the structure reactivity of particle agglomerates of foreign elements in the Al alloy. The optical operando analyses allow us (i) to reveal and quantify the local production of OH- from proton and oxygen reduction at individual Si- or Fe-rich microparticles and (ii) to quantify (and model) the chemical communication between these active sites, within a few micrometer range, on the local chemical transformation of the material. Wide-field image analysis highlights the statistical importance of chemical communication that may introduce a new conceptual framework for the understanding of the mechanisms in related fields of charge transfer, electrocatalysis, and corrosion.
Collapse
|
16
|
Mishra A, Sarbapalli D, Rodríguez O, Rodríguez-López J. Electrochemical Imaging of Interfaces in Energy Storage via Scanning Probe Methods: Techniques, Applications, and Prospects. ANNUAL REVIEW OF ANALYTICAL CHEMISTRY (PALO ALTO, CALIF.) 2023; 16:93-115. [PMID: 37068746 DOI: 10.1146/annurev-anchem-091422-110703] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Developing a deeper understanding of dynamic chemical, electronic, and morphological changes at interfaces is key to solving practical issues in electrochemical energy storage systems (EESSs). To unravel this complexity, an assortment of tools with distinct capabilities and spatiotemporal resolutions have been used to creatively visualize interfacial processes as they occur. This review highlights how electrochemical scanning probe techniques (ESPTs) such as electrochemical atomic force microscopy, scanning electrochemical microscopy, scanning ion conductance microscopy, and scanning electrochemical cell microscopy are uniquely positioned to address these challenges in EESSs. We describe the operating principles of ESPTs, focusing on the inspection of interfacial structure and chemical processes involved in Li-ion batteries and beyond. We discuss current examples, performance limitations, and complementary ESPTs. Finally, we discuss prospects for imaging improvements and deep learning for automation. We foresee that ESPTs will play an enabling role in advancing EESSs as we transition to renewable energies.
Collapse
Affiliation(s)
- Abhiroop Mishra
- Department of Chemistry, University of Illinois Urbana-Champaign, Urbana, Illinois, USA;
| | - Dipobrato Sarbapalli
- Department of Chemistry, University of Illinois Urbana-Champaign, Urbana, Illinois, USA;
| | - Oliver Rodríguez
- Department of Chemistry, University of Illinois Urbana-Champaign, Urbana, Illinois, USA;
| | | |
Collapse
|
17
|
Karg A, Gödrich S, Dennstedt P, Helfricht N, Retsch M, Papastavrou G. An Integrated, Exchangeable Three-Electrode Electrochemical Setup for AFM-Based Scanning Electrochemical Microscopy. SENSORS (BASEL, SWITZERLAND) 2023; 23:s23115228. [PMID: 37299955 DOI: 10.3390/s23115228] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/02/2023] [Revised: 05/14/2023] [Accepted: 05/27/2023] [Indexed: 06/12/2023]
Abstract
Scanning electrochemical microscopy (SECM) is a versatile scanning probe technique that allows monitoring of a plethora of electrochemical reactions on a highly resolved local scale. SECM in combination with atomic force microscopy (AFM) is particularly well suited to acquire electrochemical data correlated to sample topography, elasticity, and adhesion, respectively. The resolution achievable in SECM depends critically on the properties of the probe acting as an electrochemical sensor, i.e., the working electrode, which is scanned over the sample. Hence, the development of SECM probes received much attention in recent years. However, for the operation and performance of SECM, the fluid cell and the three-electrode setup are also of paramount importance. These two aspects received much less attention so far. Here, we present a novel approach to the universal implementation of a three-electrode setup for SECM in practically any fluid cell. The integration of all three electrodes (working, counter, and reference) near the cantilever provides many advantages, such as the usage of conventional AFM fluid cells also for SECM or enables the measurement in liquid drops. Moreover, the other electrodes become easily exchangeable as they are combined with the cantilever substrate. Thereby, the handling is improved significantly. We demonstrated that high-resolution SECM, i.e., resolving features smaller than 250 nm in the electrochemical signal, could be achieved with the new setup and that the electrochemical performance was equivalent to the one obtained with macroscopic electrodes.
Collapse
Affiliation(s)
- Andreas Karg
- Physical Chemistry II, University of Bayreuth, 95447 Bayreuth, Germany
- Bavarian Institute for Battery Technology, University of Bayreuth, 95448 Bayreuth, Germany
| | - Sebastian Gödrich
- Physical Chemistry II, University of Bayreuth, 95447 Bayreuth, Germany
| | - Philipp Dennstedt
- Physical Chemistry II, University of Bayreuth, 95447 Bayreuth, Germany
- Bavarian Institute for Battery Technology, University of Bayreuth, 95448 Bayreuth, Germany
| | - Nicolas Helfricht
- Physical Chemistry II, University of Bayreuth, 95447 Bayreuth, Germany
| | - Markus Retsch
- Bavarian Institute for Battery Technology, University of Bayreuth, 95448 Bayreuth, Germany
- Physical Chemistry I, University of Bayreuth, 95447 Bayreuth, Germany
| | - Georg Papastavrou
- Physical Chemistry II, University of Bayreuth, 95447 Bayreuth, Germany
- Bavarian Institute for Battery Technology, University of Bayreuth, 95448 Bayreuth, Germany
| |
Collapse
|
18
|
Dery S, Friedman B, Shema H, Gross E. Mechanistic Insights Gained by High Spatial Resolution Reactivity Mapping of Homogeneous and Heterogeneous (Electro)Catalysts. Chem Rev 2023; 123:6003-6038. [PMID: 37037476 PMCID: PMC10176474 DOI: 10.1021/acs.chemrev.2c00867] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/12/2023]
Abstract
The recent development of high spatial resolution microscopy and spectroscopy tools enabled reactivity analysis of homogeneous and heterogeneous (electro)catalysts at previously unattainable resolution and sensitivity. These techniques revealed that catalytic entities are more heterogeneous than expected and local variations in reaction mechanism due to divergences in the nature of active sites, such as their atomic properties, distribution, and accessibility, occur both in homogeneous and heterogeneous (electro)catalysts. In this review, we highlight recent insights in catalysis research that were attained by conducting high spatial resolution studies. The discussed case studies range from reactivity detection of single particles or single molecular catalysts, inter- and intraparticle communication analysis, and probing the influence of catalysts distribution and accessibility on the resulting reactivity. It is demonstrated that multiparticle and multisite reactivity analyses provide unique knowledge about reaction mechanism that could not have been attained by conducting ensemble-based, averaging, spectroscopy measurements. It is highlighted that the integration of spectroscopy and microscopy measurements under realistic reaction conditions will be essential to bridge the gap between model-system studies and real-world high spatial resolution reactivity analysis.
Collapse
Affiliation(s)
- Shahar Dery
- Institute of Chemistry and The Center for Nanoscience and Nanotechnology, The Hebrew University, Jerusalem 91904, Israel
| | - Barak Friedman
- Institute of Chemistry and The Center for Nanoscience and Nanotechnology, The Hebrew University, Jerusalem 91904, Israel
| | - Hadar Shema
- Institute of Chemistry and The Center for Nanoscience and Nanotechnology, The Hebrew University, Jerusalem 91904, Israel
| | - Elad Gross
- Institute of Chemistry and The Center for Nanoscience and Nanotechnology, The Hebrew University, Jerusalem 91904, Israel
| |
Collapse
|
19
|
Jin Z. High-Spatiotemporal-Resolution Electrochemical Measurements of Electrocatalytic Reactivity. Anal Chem 2023; 95:6477-6489. [PMID: 37023363 DOI: 10.1021/acs.analchem.2c05755] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/08/2023]
Abstract
The real-time measurement of the individual or local electrocatalytic reactivity of catalyst particles instead of ensemble behavior is considerably challenging but very critical to uncover fundamental insights into catalytic mechanisms. Recent remarkable efforts have been made to the development of high-spatiotemporal-resolution electrochemical techniques, which allow the imaging of the topography and reactivity of fast electron-transfer processes at the nanoscale. This Perspective summarizes emerging powerful electrochemical measurement techniques for studying various electrocatalytic reactions on different types of catalysts. Principles of scanning electrochemical microscopy, scanning electrochemical cell microscopy, single-entity measurement, and molecular probing technique have been discussed for the purpose of measuring important parameters in electrocatalysis. We further demonstrate recent advances in these techniques that reveal quantitative information about the thermodynamic and kinetic properties of catalysts for various electrocatalytic reactions associated with our perspectives. Future research on the next-generation electrochemical techniques is anticipated to be focused on the development of instrumentation, correlative multimodal techniques, and new applications, thus enabling new opportunities for elucidating structure-reactivity relationships and dynamic information at the single active-site level.
Collapse
Affiliation(s)
- Zhaoyu Jin
- Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu 610054, P. R. China
| |
Collapse
|
20
|
Santana Santos C, Jaato BN, Sanjuán I, Schuhmann W, Andronescu C. Operando Scanning Electrochemical Probe Microscopy during Electrocatalysis. Chem Rev 2023; 123:4972-5019. [PMID: 36972701 PMCID: PMC10168669 DOI: 10.1021/acs.chemrev.2c00766] [Citation(s) in RCA: 15] [Impact Index Per Article: 15.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/29/2023]
Abstract
Scanning electrochemical probe microscopy (SEPM) techniques can disclose the local electrochemical reactivity of interfaces in single-entity and sub-entity studies. Operando SEPM measurements consist of using a SEPM tip to investigate the performance of electrocatalysts, while the reactivity of the interface is simultaneously modulated. This powerful combination can correlate electrochemical activity with changes in surface properties, e.g., topography and structure, as well as provide insight into reaction mechanisms. The focus of this review is to reveal the recent progress in local SEPM measurements of the catalytic activity of a surface toward the reduction and evolution of O2 and H2 and electrochemical conversion of CO2. The capabilities of SEPMs are showcased, and the possibility of coupling other techniques to SEPMs is presented. Emphasis is given to scanning electrochemical microscopy (SECM), scanning ion conductance microscopy (SICM), electrochemical scanning tunneling microscopy (EC-STM), and scanning electrochemical cell microscopy (SECCM).
Collapse
Affiliation(s)
- Carla Santana Santos
- Analytical Chemistry - Center for Electrochemical Sciences (CES), Faculty of Chemistry and Biochemistry, Ruhr University Bochum, Universitätsstr. 150, D-44780 Bochum, Germany
| | - Bright Nsolebna Jaato
- Technical Chemistry III, Center for Nanointegration Duisburg-Essen (CENIDE), University of Duisburg-Essen Carl-Benz-Straße 199, 47057 Duisburg, Germany
| | - Ignacio Sanjuán
- Technical Chemistry III, Center for Nanointegration Duisburg-Essen (CENIDE), University of Duisburg-Essen Carl-Benz-Straße 199, 47057 Duisburg, Germany
| | - Wolfgang Schuhmann
- Analytical Chemistry - Center for Electrochemical Sciences (CES), Faculty of Chemistry and Biochemistry, Ruhr University Bochum, Universitätsstr. 150, D-44780 Bochum, Germany
| | - Corina Andronescu
- Technical Chemistry III, Center for Nanointegration Duisburg-Essen (CENIDE), University of Duisburg-Essen Carl-Benz-Straße 199, 47057 Duisburg, Germany
| |
Collapse
|
21
|
Gaudin LF, Kang M, Bentley CL. Facet-Dependent Electrocatalysis and Surface Electrochemical Processes on Polycrystalline Platinum. Electrochim Acta 2023. [DOI: 10.1016/j.electacta.2023.142223] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/14/2023]
|
22
|
Nozawa K, Zhang X, Nakamura T, Nashimoto Y, Takahashi Y, Ino K, Shiku H. Topographical evaluation of human mesenchymal stem cells during osteogenic differentiation using scanning ion conductance microscopy. Electrochim Acta 2023. [DOI: 10.1016/j.electacta.2023.142192] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/08/2023]
|
23
|
Wert S, Iffelsberger C, K. Padinjareveetil AK, Pumera M. Edges of Layered FePSe 3 Exhibit Increased Electrochemical and Electrocatalytic Activity Compared to Basal Planes. ACS APPLIED ELECTRONIC MATERIALS 2023; 5:928-934. [PMID: 36936378 PMCID: PMC10017023 DOI: 10.1021/acsaelm.2c01493] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/01/2022] [Accepted: 01/30/2023] [Indexed: 06/18/2023]
Abstract
Transition metal trichalcogenphosphites (MPX3), belonging to the class of 2D materials, are potentially viable electrocatalysts for the hydrogen evolution reaction (HER). Many 2D and layered materials exhibit different magnitudes of electrochemical and electrocatalytic activity at their edge and basal sites. To find out whether edges or basal planes are the primary sites for catalytic processes at these compounds, we studied the local electrochemical and electrocatalytic activity of FePSe3, an MPX3 representative that was previously found to be catalytically active. Using scanning electrochemical microscopy, we discovered that electrochemical processes and the HER are occurring at an increased rate at edge-like defects of FePSe3 crystals. We correlate our observations using optical microscopy, confocal laser scanning microscopy, scanning electron microscopy, and electron-dispersive X-ray spectroscopy. These findings have profound implications for the application of these materials for electrochemistry as well as for understanding general rules governing the electrochemical performance of layered compounds.
Collapse
Affiliation(s)
- Stefan Wert
- Future
Energy and Innovation Laboratory, Central European Institute of Technology, Brno University of Technology, Purkyňova 123, Brno 61200, Czech
Republic
| | - Christian Iffelsberger
- Future
Energy and Innovation Laboratory, Central European Institute of Technology, Brno University of Technology, Purkyňova 123, Brno 61200, Czech
Republic
| | - Akshay Kumar K. Padinjareveetil
- Future
Energy and Innovation Laboratory, Central European Institute of Technology, Brno University of Technology, Purkyňova 123, Brno 61200, Czech
Republic
| | - Martin Pumera
- Future
Energy and Innovation Laboratory, Central European Institute of Technology, Brno University of Technology, Purkyňova 123, Brno 61200, Czech
Republic
- Energy
Research Institute@NTU (ERI@N), Research Techno Plaza, X-Frontier Block, Level 5, 50 Nanyang Drive, Singapore 637553, Singapore
- New
Technologies—Research Centre, University
of West Bohemia, Univerzitní
8, Plzeň 30100, Czech Republic
- Department
of Medical Research, China Medical University
Hospital, China Medical University, No. 91 Hsueh-Shih Road, Taichung 40402, Taiwan
| |
Collapse
|
24
|
Liu L, Chen H, Tian L, Sun X, Zhang M. Physical visualization and squalene-based scanning electrochemical microscopy imaging of latent fingerprints on PVDF membrane. Analyst 2023; 148:1032-1040. [PMID: 36723182 DOI: 10.1039/d2an01940j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/15/2023]
Abstract
Fingerprints have long been the gold standard for personal identification in forensic science. However, realizing the high-resolution enhancement of eccrine LFPs is difficult using the traditional methods and the label-free detection of fingerprint residue information is also challenging. Herein, we propose two enhancement strategies for LFPs on PVDF membrane (LFPs/PVDF) using blue-black ink staining and scanning electrochemical microscopy (SECM). The blue-black ink staining method was used for the first time to develop three types (sebaceous, natural and eccrine) of LFPs/PVDF based on the difference in wettability between the fingerprint residues and PVDF membrane. The enhanced fingerprints clearly displayed levels 1-3 features with high contrast and low background interference. Furthermore, we achieved chemical imaging of the LFP/PVDF samples, where their possible visualization mechanisms were ascribed to the electrochemical reactivity of squalene and difference in wettability between the LFP and PVDF membrane, which was first proposed and investigated by SECM imaging and water contact angle (WCA) measurements, respectively. Significantly, SECM imaging not only provided fingerprint patterns without any labelling but also revealed the spatial distribution information of squalene in LFPs simultaneously. In addition, it was also demonstrated that LFPs deposited on various surfaces were first successfully transferred to the PVDF membrane, and then further developed with both methods, making them general for personal identity-related applications. Taken together, the blue-black ink staining method can easily and quickly obtain level 3 features of LFPs/PVDF and the SECM approach can non-invasively image the topography and chemical information of LFPs/PVDF, and thus they can be potentially selected according to various requirements in forensic scenarios.
Collapse
Affiliation(s)
- Lu Liu
- Beijing Key Laboratory for Bioengineering and Sensing Technology, School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing 100083, China.
| | - Hongyu Chen
- Beijing Key Laboratory for Bioengineering and Sensing Technology, School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing 100083, China.
| | - Lu Tian
- Beijing Key Laboratory for Bioengineering and Sensing Technology, School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing 100083, China.
| | - Xiangyu Sun
- Beijing Key Laboratory for Bioengineering and Sensing Technology, School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing 100083, China.
| | - Meiqin Zhang
- Beijing Key Laboratory for Bioengineering and Sensing Technology, School of Chemistry and Biological Engineering, University of Science and Technology Beijing, Beijing 100083, China.
| |
Collapse
|
25
|
Varhade S, Tetteh EB, Saddeler S, Schumacher S, Aiyappa HB, Bendt G, Schulz S, Andronescu C, Schuhmann W. Crystal Plane-Related Oxygen-Evolution Activity of Single Hexagonal Co 3 O 4 Spinel Particles. Chemistry 2023; 29:e202203474. [PMID: 36423237 DOI: 10.1002/chem.202203474] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/08/2022] [Revised: 11/24/2022] [Accepted: 11/24/2022] [Indexed: 11/26/2022]
Abstract
The electrocatalytic activity for the oxygen evolution reaction in alkaline electrolyte of hexagonal spinel Co3 O4 nanoparticles derived using scanning electrochemical cell microscopy (SECCM) is correlated with scanning electron microscopy and atomic force microscopy images of the droplet landing sites. A unique way to deconvolute the intrinsic catalytic activity of individual crystal facets of the hexagonal Co3 O4 spinel particle is demonstrated in terms of the turnover frequency (TOF) of surface Co atoms. The top surface exposing 111 crystal planes displayed a thickness-dependent TOF with a TOF of about 100 s-1 at a potential of 1.8 V vs. RHE and a particle thickness of 100 nm. The edge of the particle exposing (110) planes, however, showed an average TOF of 270±68 s-1 at 1.8 V vs. RHE and no correlation with particle thickness. The higher atomic density of Co atoms on the edge surface (2.5 times of the top) renders the overall catalytic activity of the edge planes significantly higher than that of the top planes. The use of a free-diffusing Os complex in the alkaline electrolyte revealed the low electrical conductivity through individual particles, which explains the thickness-dependent TOF of the top planes and could be a reason for the low activity of the top (111) planes.
Collapse
Affiliation(s)
- Swapnil Varhade
- Analytical Chemistry - Center for Electrochemical Sciences (CES), Faculty of Chemistry and Biochemistry, Ruhr-Universität Bochum, Universitätsstrasse 150, 44780, Bochum, Germany
| | - Emmanuel Batsa Tetteh
- Analytical Chemistry - Center for Electrochemical Sciences (CES), Faculty of Chemistry and Biochemistry, Ruhr-Universität Bochum, Universitätsstrasse 150, 44780, Bochum, Germany
| | - Sascha Saddeler
- Analytical Chemistry - Center for Electrochemical Sciences (CES), Faculty of Chemistry and Biochemistry, Ruhr-Universität Bochum, Universitätsstrasse 150, 44780, Bochum, Germany.,Inorganic Chemistry, Faculty of Chemistry, University of Duisburg-Essen, Universitätsstrasse 7, 45141, Essen, Germany
| | - Simon Schumacher
- Chemical Technology III, Faculty of Chemistry, University of Duisburg Essen, Carl-Benz-Strasse 199, 47057, Duisburg, Germany
| | - Harshitha Barike Aiyappa
- Analytical Chemistry - Center for Electrochemical Sciences (CES), Faculty of Chemistry and Biochemistry, Ruhr-Universität Bochum, Universitätsstrasse 150, 44780, Bochum, Germany
| | - Georg Bendt
- Inorganic Chemistry, Faculty of Chemistry, University of Duisburg-Essen, Universitätsstrasse 7, 45141, Essen, Germany
| | - Stephan Schulz
- Inorganic Chemistry, Faculty of Chemistry, University of Duisburg-Essen, Universitätsstrasse 7, 45141, Essen, Germany.,Center for Nanointegration (CENIDE), University of Duisburg-Essen, Carl-Benz-Strasse 199, 47057, Duisburg, Germany
| | - Corina Andronescu
- Chemical Technology III, Faculty of Chemistry, University of Duisburg Essen, Carl-Benz-Strasse 199, 47057, Duisburg, Germany.,Center for Nanointegration (CENIDE), University of Duisburg-Essen, Carl-Benz-Strasse 199, 47057, Duisburg, Germany
| | - Wolfgang Schuhmann
- Analytical Chemistry - Center for Electrochemical Sciences (CES), Faculty of Chemistry and Biochemistry, Ruhr-Universität Bochum, Universitätsstrasse 150, 44780, Bochum, Germany
| |
Collapse
|
26
|
Bentley CL, Gaudin LF, Kang M. Direct electrochemical identification of rare microscopic catalytic active sites. Chem Commun (Camb) 2023; 59:2287-2290. [PMID: 36744442 DOI: 10.1039/d2cc06316f] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/31/2023]
Abstract
Local voltammetric analysis with a scanning electrochemical droplet cell technique, in combination with a new data processing protocol (termed data binning and trinisation), is used to directly identify previously unseen regions of elevated electrocatalytic activity on the basal plane (BP) of molybdenum disulfide (2H-MoS2). This includes BP-like structures with hydrogen evolution reaction activities approaching that of the edge plane and rare nanoscale electrocatalytic "hot-spots" present at an areal density of approximately 0.2-1 μm-2. Understanding the nature of (sub)microscopic catalytic active sites, such as those identified herein, is crucial to guide the rational design of next-generation earth-abundant materials for renewable fuels production.
Collapse
Affiliation(s)
- Cameron L Bentley
- School of Chemistry, Monash University, Clayton, Victoria 3800, Australia.
| | - Lachlan F Gaudin
- School of Chemistry, Monash University, Clayton, Victoria 3800, Australia.
| | - Minkyung Kang
- Institute for Frontier Materials Deakin University, Burwood, Victoria 3125, Australia
| |
Collapse
|
27
|
Xia T, Yang Y, Song Q, Luo M, Xue M, Ostrikov KK, Zhao Y, Li F. In situ characterisation for nanoscale structure-performance studies in electrocatalysis. NANOSCALE HORIZONS 2023; 8:146-157. [PMID: 36512394 DOI: 10.1039/d2nh00447j] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
Recently, electrocatalytic reactions involving oxygen, nitrogen, water, and carbon dioxide have been developed to substitute conventional chemical processes, with the aim of producing clean energy, fuels and chemicals. A deepened understanding of catalyst structures, active sites and reaction mechanisms plays a critical role in improving the performance of these reactions. To this end, in situ/operando characterisations can be used to visualise the dynamic evolution of nanoscale materials and reaction intermediates under electrolysis conditions, thus enhancing our understanding of heterogeneous electrocatalytic reactions. In this review, we summarise the state-of-the-art in situ characterisation techniques used in electrocatalysis. We categorise them into three sections based on different working principles: microscopy, spectroscopy, and other characterisation techniques. The capacities and limits of the in situ characterisation techniques are discussed in each section to highlight the present-day horizons and guide further advances in the field, primarily aiming at the users of these techniques. Finally, we look at challenges and possible strategies for further development of in situ techniques.
Collapse
Affiliation(s)
- Tianlai Xia
- School of Chemical and Biomolecular Engineering and The University of Sydney Nano Institute, The University of Sydney, NSW 2006, Australia.
- Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, China
| | - Yu Yang
- School of Chemical and Biomolecular Engineering and The University of Sydney Nano Institute, The University of Sydney, NSW 2006, Australia.
| | - Qiang Song
- School of Chemical and Biomolecular Engineering and The University of Sydney Nano Institute, The University of Sydney, NSW 2006, Australia.
| | - Mingchuan Luo
- School of Materials Science and Engineering, Peking University, Beijing, China
| | - Mianqi Xue
- Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, China
| | - Kostya Ken Ostrikov
- School of Chemistry and Physics and Centre for Materials Science, Queensland University of Technology, Brisbane, QLD 4000, Australia.
| | - Yong Zhao
- School of Chemical and Biomolecular Engineering and The University of Sydney Nano Institute, The University of Sydney, NSW 2006, Australia.
- CSIRO Energy, Mayfield West, NSW 2304, Australia
| | - Fengwang Li
- School of Chemical and Biomolecular Engineering and The University of Sydney Nano Institute, The University of Sydney, NSW 2006, Australia.
| |
Collapse
|
28
|
Xu X, Valavanis D, Ciocci P, Confederat S, Marcuccio F, Lemineur JF, Actis P, Kanoufi F, Unwin PR. The New Era of High-Throughput Nanoelectrochemistry. Anal Chem 2023; 95:319-356. [PMID: 36625121 PMCID: PMC9835065 DOI: 10.1021/acs.analchem.2c05105] [Citation(s) in RCA: 34] [Impact Index Per Article: 34.0] [Reference Citation Analysis] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/11/2023]
Affiliation(s)
- Xiangdong Xu
- Department
of Chemistry, University of Warwick, Coventry CV4 7AL, U.K.
| | | | - Paolo Ciocci
- Université
Paris Cité, ITODYS, CNRS, F-75013 Paris, France
| | - Samuel Confederat
- School
of Electronic and Electrical Engineering and Pollard Institute, University of Leeds, Leeds LS2 9JT, U.K.,Bragg
Centre for Materials Research, University
of Leeds, Leeds LS2 9JT, U.K.
| | - Fabio Marcuccio
- School
of Electronic and Electrical Engineering and Pollard Institute, University of Leeds, Leeds LS2 9JT, U.K.,Bragg
Centre for Materials Research, University
of Leeds, Leeds LS2 9JT, U.K.,Faculty
of Medicine, Imperial College London, London SW7 2AZ, United Kingdom
| | | | - Paolo Actis
- School
of Electronic and Electrical Engineering and Pollard Institute, University of Leeds, Leeds LS2 9JT, U.K.,Bragg
Centre for Materials Research, University
of Leeds, Leeds LS2 9JT, U.K.,
| | | | - Patrick R. Unwin
- Department
of Chemistry, University of Warwick, Coventry CV4 7AL, U.K.,
| |
Collapse
|
29
|
Lai Z, Li D, Cai S, Liu M, Huang F, Zhang G, Wu X, Jin Y. Small-Area Techniques for Micro- and Nanoelectrochemical Characterization: A Review. Anal Chem 2023; 95:357-373. [PMID: 36625128 DOI: 10.1021/acs.analchem.2c04551] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/11/2023]
Affiliation(s)
- Zhaogui Lai
- National Center for Materials Service Safety, University of Science and Technology Beijing, Beijing 102206, China
| | - Dingshi Li
- Beijing Institute of Space Launch Technology, Beijing 100076, China
| | - Shuangyu Cai
- National Center for Materials Service Safety, University of Science and Technology Beijing, Beijing 102206, China
| | - Min Liu
- Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China
| | - Feifei Huang
- National Center for Materials Service Safety, University of Science and Technology Beijing, Beijing 102206, China
| | - Guodong Zhang
- Beijing Institute of Space Launch Technology, Beijing 100076, China
| | - Xinyue Wu
- Beijing Institute of Space Launch Technology, Beijing 100076, China
| | - Ying Jin
- National Center for Materials Service Safety, University of Science and Technology Beijing, Beijing 102206, China
| |
Collapse
|
30
|
Rahman MM, Tolbert CL, Saha P, Halpern JM, Hill CM. On-Demand Electrochemical Fabrication of Ordered Nanoparticle Arrays using Scanning Electrochemical Cell Microscopy. ACS NANO 2022; 16:21275-21282. [PMID: 36399100 DOI: 10.1021/acsnano.2c09336] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Well-ordered nanoparticle arrays are attractive platforms for a variety of analytical applications, but the fabrication of such arrays is generally challenging. Here, it is demonstrated that scanning electrochemical cell microscopy (SECCM) can be used as a powerful, instantly reconfigurable tool for the fabrication of ordered nanoparticle arrays. Using SECCM, Ag nanoparticle arrays were straightforwardly fabricated via electrodeposition at the interface between a substrate electrode and an electrolyte-filled pipet. By dynamically monitoring the currents flowing in an SECCM cell, individual nucleation and growth events could be detected and controlled to yield individual nanoparticles of controlled size. Characterization of the resulting arrays demonstrate that this SECCM-based approach enables spatial control of nanoparticle location comparable with the terminal diameter of the pipet employed and straightforward control over the volume of material deposited at each site within an array. These results provide further evidence for the utility of probe-based electrochemical techniques such as SECCM as tools for surface modification in addition to analysis.
Collapse
Affiliation(s)
- Md Maksudur Rahman
- Department of Chemistry, University of Wyoming, 1000 East University Avenue, Laramie, Wyoming82071, United States
| | - Chloe L Tolbert
- Department of Chemistry, University of Wyoming, 1000 East University Avenue, Laramie, Wyoming82071, United States
| | - Partha Saha
- Department of Chemistry, University of Wyoming, 1000 East University Avenue, Laramie, Wyoming82071, United States
| | - Jeffrey M Halpern
- Department of Chemical Engineering and the Materials Science and Engineering Program, University of New Hampshire, 33 Academic Way, Durham, New Hampshire03824, United States
| | - Caleb M Hill
- Department of Chemistry, University of Wyoming, 1000 East University Avenue, Laramie, Wyoming82071, United States
| |
Collapse
|
31
|
Chen H, Kong X, Wang D, Zhang M. Flexible Disk Ultramicroelectrode for High-Resolution and Substrate-Tolerable Scanning Electrochemical Microscopy Imaging. Anal Chem 2022; 94:17320-17327. [PMID: 36448925 DOI: 10.1021/acs.analchem.2c04465] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/02/2022]
Abstract
A simple and universal strategy for fabricating flexible 25 μm platinum (Pt) disk ultramicroelectrodes (UMEs) was proposed, where a pulled borosilicate glass micropipette acted as a mold for shaping the flexible tip with flexible epoxy resin. The whole preparation procedure was highly efficient, enabling 10 or more probes to be manually fabricated within 10 h. Intriguingly, this technique permits an adjustable RG ratio, tip length, and stiffness, which could be tuned according to varying experimental demands. Besides, the electroactive area of the probe could be exposed and made renewable with a thin blade, allowing its reuse in multiple experiments. The flexibility characterization was then employed to optimize the resin/hardener mass ratio of epoxy resin and the tip position during HF etching in the fabrication process, suggesting that more hardener, a larger RG value, or a longer tip length obtained stronger deformation resistance. Subsequently, the as-prepared probe was examined by optical microscopy, cyclic voltammetry, and SECM approach curves. The results demonstrated the probe possessed good geometry with a small RG ratio of less than 3 and exceptional electrochemical properties, and its insulating sheath remained undeformed after blade cutting. Owing to the tip's flexibility, it could be operated in contactless mode with an extremely low working distance and even in contact mode scanning to achieve high spatial resolution and high sensitivity while guaranteeing that the tip and samples would suffer minimal damage if the tip crashed. Finally, the flexible probe was successfully employed in three scanning scenarios where tilted and 3D structured PDMS microchips, a latent fingerprint deposited on the stiff copper sheet, and soft egg white were included. In all, the flexible probe encompasses the advantages of traditional disk UMEs and circumvents their principal drawbacks of tip crash and causing sample scratches, which is thus more compatible with large specimens of 3D structured, stiff, or even soft topography.
Collapse
Affiliation(s)
- Hongyu Chen
- Beijing Key Laboratory for Bioengineering and Sensing Technology, School of Chemistry and Biological Engineering, University of Science and Technology Beijing, 30 Xueyuan Road, Beijing100083, China
| | - Xiangyi Kong
- Beijing Key Laboratory for Bioengineering and Sensing Technology, School of Chemistry and Biological Engineering, University of Science and Technology Beijing, 30 Xueyuan Road, Beijing100083, China
| | - Dongrui Wang
- Beijing Key Laboratory for Bioengineering and Sensing Technology, School of Chemistry and Biological Engineering, University of Science and Technology Beijing, 30 Xueyuan Road, Beijing100083, China
| | - Meiqin Zhang
- Beijing Key Laboratory for Bioengineering and Sensing Technology, School of Chemistry and Biological Engineering, University of Science and Technology Beijing, 30 Xueyuan Road, Beijing100083, China
| |
Collapse
|
32
|
Wei J, Chen W, Zhou D, Cai J, Chen YX. Restructuring of well-defined Pt-based electrode surfaces under mild electrochemical conditions. CHINESE JOURNAL OF CATALYSIS 2022. [DOI: 10.1016/s1872-2067(22)64100-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/31/2022]
|
33
|
Eghbal M, Rozman M, Kononenko V, Hočevar M, Drobne D. A549 Cell-Covered Electrodes as a Sensing Element for Detection of Effects of Zn 2+ Ions in a Solution. NANOMATERIALS (BASEL, SWITZERLAND) 2022; 12:3493. [PMID: 36234621 PMCID: PMC9565818 DOI: 10.3390/nano12193493] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/30/2022] [Revised: 09/23/2022] [Accepted: 09/30/2022] [Indexed: 06/16/2023]
Abstract
Electrochemical-based biosensors have the potential to be a fast, label-free, simple approach to detecting the effects of cytotoxic substances in liquid media. In the work presented here, a cell-based electrochemical biosensor was developed and evaluated to detect the cytotoxic effects of Zn2+ ions in a solution as a reference test chemical. A549 cells were attached to the surface of stainless-steel electrodes. After treatment with ZnCl2, the morphological changes of the cells and, ultimately, their death and detachment from the electrode surface as cytotoxic effects were detected through changes in the electrical signal. Electrochemical cell-based impedance spectroscopy (ECIS) measurements were conducted with cytotoxicity tests and microscopic observation to investigate the behavior of the A549 cells. As expected, the Zn2+ ions caused changes in cell confluency and spreading, which were checked by light microscopy, while the cell morphology and attachment pattern were explored by scanning electron microscopy (SEM). The ECIS measurements confirmed the ability of the biosensor to detect the effects of Zn2+ ions on A549 cells attached to the low-cost stainless-steel surfaces and its potential for use as an inexpensive detector for a broad range of chemicals and nanomaterials in their cytotoxic concentrations.
Collapse
Affiliation(s)
- Mina Eghbal
- Department of Biology, Biotechnical Faculty, University of Ljubljana, Večna pot 111, 1000 Ljubljana, Slovenia
| | - Martin Rozman
- FunGlass—Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Študentská 2, 911 50 Trenčín, Slovakia
| | - Veno Kononenko
- Department of Biology, Biotechnical Faculty, University of Ljubljana, Večna pot 111, 1000 Ljubljana, Slovenia
| | - Matej Hočevar
- Institute of Metals and Technology, Lepi pot 11, 1000 Ljubljana, Slovenia
| | - Damjana Drobne
- Department of Biology, Biotechnical Faculty, University of Ljubljana, Večna pot 111, 1000 Ljubljana, Slovenia
| |
Collapse
|
34
|
Gao H, Xu J, Liu C, Wang F, Sun H, Wang Q, Zhou M. Precise Polishing and Electrochemical Applications of Quartz Nanopipette-Based Carbon Nanoelectrodes. Anal Chem 2022; 94:14092-14098. [PMID: 36191159 DOI: 10.1021/acs.analchem.2c02296] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
Quartz nanopipette-based carbon nanoelectrodes (CNEs) have attracted extensive attention in nanoscale electrochemistry due to their simple and efficient fabrication, chemically inert materials, flexible size (down to a few nanometers), and ultrathin insulating encapsulation. However, these pristine CNEs usually have significantly irregular morphology on the surface, which greatly limits the applications where inlaid nanodisks are urgently needed. To address this critical issue, we have developed a new precise polishing strategy using paraffin coating protection (i.e., avoiding breakage of quartz materials) and real-time monitoring with a high impedance meter (i.e., indicating electrode exposure) to produce flat carbon nanodisk electrodes. The surface flatness of polished CNEs has been confirmed by a combination of scanning electron microscopy, fast-scan cyclic voltammetry, and scanning electrochemical microscopy. As compared to the expensive focused ion beam processing, this strategy is competitive in terms of the low cost and availability of the equipment and enables the preparation of polished CNEs with sufficiently small size. The flattened CNEs have been exemplified for grafting molecular catalysts to achieve the durable catalysis of reactive molecules or for immobilizing single-particle electrocatalysts to measure the intrinsic activity under sufficient mass-transfer rates.
Collapse
Affiliation(s)
- Han Gao
- State Key Laboratory of Electroanalytical Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, Jilin 130022, China.,University of Science and Technology of China, Hefei, Anhui 230026, China
| | - Jianan Xu
- State Key Laboratory of Electroanalytical Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, Jilin 130022, China
| | - Chen Liu
- State Key Laboratory of Electroanalytical Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, Jilin 130022, China.,University of Science and Technology of China, Hefei, Anhui 230026, China
| | - Fei Wang
- State Key Laboratory of Electroanalytical Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, Jilin 130022, China
| | - Haotian Sun
- State Key Laboratory of Electroanalytical Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, Jilin 130022, China
| | - Qian Wang
- Beijing Key Laboratory of Ionic Liquids Clean Process, CAS Key Laboratory of Green Process and Engineering, State Key Laboratory of Multiphase Complex Systems, Institute of Process Engineering, Innovation Academy for Green Manufacture, CAS, Beijing 100190, China
| | - Min Zhou
- State Key Laboratory of Electroanalytical Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, Jilin 130022, China.,University of Science and Technology of China, Hefei, Anhui 230026, China
| |
Collapse
|
35
|
Daviddi E, Shkirskiy V, Kirkman PM, Robin MP, Bentley CL, Unwin PR. Screening the Surface Structure-Dependent Action of a Benzotriazole Derivative on Copper Electrochemistry in a Triple-Phase Nanoscale Environment. THE JOURNAL OF PHYSICAL CHEMISTRY. C, NANOMATERIALS AND INTERFACES 2022; 126:14897-14907. [PMID: 36110498 PMCID: PMC9465680 DOI: 10.1021/acs.jpcc.2c04494] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 06/28/2022] [Revised: 08/09/2022] [Indexed: 06/15/2023]
Abstract
Copper (Cu) corrosion is a compelling problem in the automotive sector and in oil refinery and transport, where it is mainly caused by the action of acidic aqueous droplets dispersed in an oil phase. Corrosion inhibitors, such as benzotriazole (BTAH) and its derivatives, are widely used to limit such corrosion processes. The efficacy of corrosion inhibitors is expected to be dependent on the surface crystallography of metals exposed to the corrosion environment. Yet, studies of the effect of additives at the local level of the surface crystallographic structure of polycrystalline metals are challenging, particularly lacking for the triple-phase corrosion problem (metal/aqueous/oil). To address this issue, scanning electrochemical cell microscopy (SECCM), is used in an acidic nanodroplet meniscus|oil layer|polycrystalline Cu configuration to explore the grain-dependent influence of an oil soluble BTAH derivative (BTA-R) on Cu electrochemistry within the confines of a local aqueous nanoprobe. Electrochemical maps, collected in the voltammetric mode at an array of >1000 points across the Cu surface, reveal both cathodic (mainly the oxygen reduction reaction) and anodic (Cu electrooxidation) processes, of relevance to corrosion, as a function of the local crystallographic structure, deduced with co-located electron backscatter diffraction (EBSD). BTA-R is active on the whole spectrum of crystallographic orientations analyzed, but there is a complex grain-dependent action, distinct for oxygen reduction and Cu oxidation. The methodology pinpoints the surface structural motifs that facilitate corrosion-related processes and where BTA-R works most efficiently. Combined SECCM-EBSD provides a detailed screen of a spectrum of surface sites, and the results should inform future modeling studies, ultimately contributing to a better inhibitor design.
Collapse
Affiliation(s)
- Enrico Daviddi
- Department
of Chemistry, University of Warwick, Coventry CV4 7AL, U.K.
| | | | | | | | - Cameron L. Bentley
- School
of Chemistry, Monash University, Clayton, Victoria 3800, Australia
| | - Patrick R. Unwin
- Department
of Chemistry, University of Warwick, Coventry CV4 7AL, U.K.
| |
Collapse
|
36
|
Ma Y, Zhao Y, Liu R, Wang D. Scanning Electrochemical Microscopy Featuring Transient Current Signals in Carbon Nanopipets with Dilute or No Redox Mediator. Anal Chem 2022; 94:11124-11128. [PMID: 35920511 DOI: 10.1021/acs.analchem.2c02596] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
Herein, we report a sensitive scanning electrochemical microscopy (SECM) method based on the high transient current signals in carbon nanopipets (CNPs) under step potential waveforms. Taking advantage of the transient peak current, the approach curve can be conducted with very dilute (1 μM) or even no redox mediator and fitted by the scanning ion conductance microscopy (SICM) theory. In addition, a trace amount of electroactive species generated at the substrate can also be directly revealed from the transient current at the CNP tips. With the established feedback and generation/collection methods, we present the constant-height topography and electroactivity imaging of the substrates with only 1 μM K4Fe(CN)6. The developed new SECM method would allow the usage of CNPs to achieve both high sensitivity and spatial resolution with dilute or no redox mediator and thus find great potential applications in biological and electrocatalytic studies.
Collapse
Affiliation(s)
- Yingfei Ma
- Department of Chemical Sciences, University of Chinese Academy of Sciences, Beijing 100049, P. R. China
| | - Yingjie Zhao
- Department of Chemical Sciences, University of Chinese Academy of Sciences, Beijing 100049, P. R. China
| | - Rujia Liu
- Department of Chemical Sciences, University of Chinese Academy of Sciences, Beijing 100049, P. R. China
| | - Dengchao Wang
- Department of Chemical Sciences, University of Chinese Academy of Sciences, Beijing 100049, P. R. China
| |
Collapse
|
37
|
Schumacher S, Madauß L, Liebsch Y, Tetteh EB, Varhade S, Schuhmann W, Schleberger M, Andronescu C. Revealing the heterogeneity of large‐area MoS2 layers in the electrocatalytic hydrogen evolution reaction. ChemElectroChem 2022; 9:e202200586. [PMID: 36246850 PMCID: PMC9544614 DOI: 10.1002/celc.202200586] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/24/2022] [Revised: 06/27/2022] [Indexed: 11/30/2022]
Abstract
The electrocatalytic activity concerning the hydrogen evolution reaction (HER) of micrometer‐sized MoS2 layers transferred on a glassy carbon surface was evaluated by scanning electrochemical cell microscopy (SECCM) in a high‐throughput approach. Multiple areas on single or multiple MoS2 layers were assessed using a hopping mode nanocapillary positioning with a hopping distance of 500 nm and a nanopipette size of around 55 nm. The locally recorded linear sweep voltammograms revealed a high lateral heterogeneity over the MoS2 sheet regarding their HER activity, with currents between −40 and −60 pA recorded at −0.89 V vs. reversible hygrogen electrode over about 4400 different measured areas on the MoS2 sheet. Stacked MoS2 layers did not show different electrocatalytic activity than the single MoS2 sheet, suggesting that the interlayer resistance influences the electrocatalytic activity less than the resistances induced by possible polymer residues or water layers formed between the transferred MoS2 sheet and the glassy carbon electrode.
Collapse
Affiliation(s)
- Simon Schumacher
- Universität Duisburg-Essen Fakultät für Chemie: Universitat Duisburg-Essen Fakultat fur Chemie Chemical Technology III GERMANY
| | - Lukas Madauß
- Universitat Duisburg-Essen Fakultat fur Physik CENIDE GERMANY
| | | | - Emmanuel Batsa Tetteh
- Ruhr Universitat Bochum Fakultat fur Chemie und Biochemie Analytical Chemistry – Center for Electrochemical Sciences (CES), GERMANY
| | - Swapnil Varhade
- Ruhr Universität Bochum Fakultät für Chemie und Biochemie: Ruhr Universitat Bochum Fakultat fur Chemie und Biochemie Analytical Chemistry – Center for Electrochemical Sciences (CES) GERMANY
| | - Wolfgang Schuhmann
- Ruhr Universität Bochum Fakultät für Chemie und Biochemie: Ruhr Universitat Bochum Fakultat fur Chemie und Biochemie Analytical Chemistry – Center for Electrochemical Sciences (CES), GERMANY
| | | | - Corina Andronescu
- Universitat Duisburg-Essen Chemical Technology III Carl-Benz-Str. 199 D-47057 Duisburg GERMANY
| |
Collapse
|
38
|
Kawabe Y, Miyakoshi Y, Tang R, Fukuma T, Nishihara H, Takahashi Y. Nanoscale characterization of the site‐specific degradation of electric double‐layer capacitor using scanning electrochemical cell microscopy. ELECTROCHEMICAL SCIENCE ADVANCES 2022. [DOI: 10.1002/elsa.202100053] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022] Open
Affiliation(s)
- Yusuke Kawabe
- Division of Electrical Engineering and Computer Science Kanazawa University Kanazawa Kakuma‐machi Japan
| | - Yosuke Miyakoshi
- Division of Electrical Engineering and Computer Science Kanazawa University Kanazawa Kakuma‐machi Japan
| | - Rui Tang
- Advanced Institute for Materials Research / Institute of Multidisciplinary Research for Advanced Materials Tohoku University Sendai Miyagi Japan
| | - Takeshi Fukuma
- Division of Electrical Engineering and Computer Science Kanazawa University Kanazawa Kakuma‐machi Japan
- WPI Nano Life Science Institute (WPI‐NanoLSI) Kanazawa University Kanazawa Japan
| | - Hirotomo Nishihara
- Advanced Institute for Materials Research / Institute of Multidisciplinary Research for Advanced Materials Tohoku University Sendai Miyagi Japan
| | - Yasufumi Takahashi
- Division of Electrical Engineering and Computer Science Kanazawa University Kanazawa Kakuma‐machi Japan
- WPI Nano Life Science Institute (WPI‐NanoLSI) Kanazawa University Kanazawa Japan
- Precursory Research for Embryonic Science and Technology (PRESTO) Japan Science and Technology Agency (JST) Saitama Japan
| |
Collapse
|
39
|
Sun P, Yao Z, Wu S, Silvas R, Khichoomian N, Carrillo Z, Anz S. Potentiometric Study of the Growth of a Single Au Nanoparticle. ELECTROANAL 2022. [DOI: 10.1002/elan.202200166] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Affiliation(s)
- Peng Sun
- California State Polytechnic University Pomona UNITED STATES
| | | | | | | | | | | | | |
Collapse
|
40
|
Zheng W, Lee LYS. Observing Electrocatalytic Processes via In Situ Electrochemical Scanning Tunneling Microscopy: Latest Advances. Chem Asian J 2022; 17:e202200384. [PMID: 35621190 DOI: 10.1002/asia.202200384] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/12/2022] [Revised: 05/25/2022] [Indexed: 11/08/2022]
Abstract
Electrocatalysis is the foundation of many techniques that are currently used to address both environmental and energy problems. Therefore, understanding electrocatalytic processes is essential to guide the rational design of electrocatalysts. Scanning tunneling microscopy (STM), which was developed in the 1980s, remains one of the few techniques that allow surface imaging at the atomic level, making it incredibly useful in electrocatalytic research. In this review, we introduced the basic concept and latest applications of the STM technique for in situ studies of electrocatalytic processes, particularly its capability in analyzing species adsorption/desorption, surface reconstruction, active site identification, and electrocatalyst dissolution, as well as its advantages and limitations.
Collapse
Affiliation(s)
- Weiran Zheng
- The Hong Kong Polytechnic University, Department of Applied Biology and Chemical Technology, HONG KONG
| | - Lawrence Yoon Suk Lee
- The Hong Kong Polytechnic University, Department of Applied Biology and Chemical Technology, The Hong Kong Polytechnic University, ., Hung Hom, HONG KONG
| |
Collapse
|
41
|
Hesari M, Jia R, Mirkin MV. Metal Organic Framework (MOF) Based Electrochemical Nanosensor for Hydrogen Peroxide. ChemElectroChem 2022. [DOI: 10.1002/celc.202200373] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Affiliation(s)
- Mahdi Hesari
- CUNY Queens College: Queens College Chemistry & Biochemistry UNITED STATES
| | - Rui Jia
- CUNY Queens College: Queens College Chemistry & Biochemistry UNITED STATES
| | - Michael V. Mirkin
- Queens College Department of Chemistry and Biochemistry 65-30 Kissena Blvd 11367 Flushing UNITED STATES
| |
Collapse
|
42
|
Bentley CL, Kang M, Bukola S, Creager SE, Unwin PR. High-Resolution Ion-Flux Imaging of Proton Transport through Graphene|Nafion Membranes. ACS NANO 2022; 16:5233-5245. [PMID: 35286810 PMCID: PMC9047657 DOI: 10.1021/acsnano.1c05872] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/11/2021] [Accepted: 11/29/2021] [Indexed: 05/18/2023]
Abstract
In 2014, it was reported that protons can traverse between aqueous phases separated by nominally pristine monolayer graphene and hexagonal boron nitride (h-BN) films (membranes) under ambient conditions. This intrinsic proton conductivity of the one-atom-thick crystals, with proposed through-plane conduction, challenged the notion that graphene is impermeable to atoms, ions, and molecules. More recent evidence points to a defect-facilitated transport mechanism, analogous to transport through conventional ion-selective membranes based on graphene and h-BN. Herein, local ion-flux imaging is performed on chemical vapor deposition (CVD) graphene|Nafion membranes using an "electrochemical ion (proton) pump cell" mode of scanning electrochemical cell microscopy (SECCM). Targeting regions that are free from visible macroscopic defects (e.g., cracks, holes, etc.) and assessing hundreds to thousands of different sites across the graphene surfaces in a typical experiment, we find that most of the CVD graphene|Nafion membrane is impermeable to proton transport, with transmission typically occurring at ≈20-60 localized sites across a ≈0.003 mm2 area of the membrane (>5000 measurements total). When localized proton transport occurs, it can be a highly dynamic process, with additional transmission sites "opening" and a small number of sites "closing" under an applied electric field on the seconds time scale. Applying a simple equivalent circuit model of ion transport through a cylindrical nanopore, the local transmission sites are estimated to possess dimensions (radii) on the (sub)nanometer scale, implying that rare atomic defects are responsible for proton conductance. Overall, this work reinforces SECCM as a premier tool for the structure-property mapping of microscopically complex (electro)materials, with the local ion-flux mapping configuration introduced herein being widely applicable for functional membrane characterization and beyond, for example in diagnosing the failure mechanisms of protective surface coatings.
Collapse
Affiliation(s)
- Cameron L. Bentley
- School
of Chemistry, Monash University, Clayton, Victoria 3800, Australia
- Department
of Chemistry, University of Warwick, Coventry CV4 7AL, United Kingdom
| | - Minkyung Kang
- Department
of Chemistry, University of Warwick, Coventry CV4 7AL, United Kingdom
| | - Saheed Bukola
- Department
of Chemistry, Clemson University, Clemson, South Carolina 29634, United States
| | - Stephen E. Creager
- Department
of Chemistry, Clemson University, Clemson, South Carolina 29634, United States
| | - Patrick R. Unwin
- Department
of Chemistry, University of Warwick, Coventry CV4 7AL, United Kingdom
| |
Collapse
|
43
|
Unwin P. Concluding remarks: next generation nanoelectrochemistry - next generation nanoelectrochemists. Faraday Discuss 2022; 233:374-391. [PMID: 35229863 DOI: 10.1039/d2fd00020b] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
The aim of this paper is to describe the scientific journey taken to arrive at present-day nanoelectrochemistry and consider how the area might develop in the future, particularly in light of papers presented at this Faraday Discussion. By adopting a generational approach, this brief contribution traces the story of the nanoelectrochemistry family within the broader electrochemistry field, with a focus on scientific capability and themes that were important to each generation. I shall consider research questions and the impact of technology that was developed or available in each period. Nanoelectrochemistry is still somewhat niche, but is attracting increasing numbers of researchers. It is set to become a major part of electrochemistry and interfacial science. It is studied by people with a fairly unique skillset, and I shall speculate on the skills and expertise that will be needed by nanoelectrochemists to address the challenges and opportunities that lie ahead. I conclude by asking: who will be the nanoelectrochemists of the future and what will they do?
Collapse
Affiliation(s)
- Patrick Unwin
- Department of Chemistry, University of Warwick, Coventry, CV4 7AL, UK.
| |
Collapse
|
44
|
Murphy JG, Raybin JG, Sibener SJ. Correlating polymer structure, dynamics, and function with atomic force microscopy. JOURNAL OF POLYMER SCIENCE 2022. [DOI: 10.1002/pol.20210321] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Affiliation(s)
- Julia G. Murphy
- The James Franck Institute and Department of Chemistry The University of Chicago Chicago Illinois USA
| | - Jonathan G. Raybin
- The James Franck Institute and Department of Chemistry The University of Chicago Chicago Illinois USA
| | - Steven J. Sibener
- The James Franck Institute and Department of Chemistry The University of Chicago Chicago Illinois USA
| |
Collapse
|
45
|
Guo SX, Bentley CL, Kang M, Bond AM, Unwin PR, Zhang J. Advanced Spatiotemporal Voltammetric Techniques for Kinetic Analysis and Active Site Determination in the Electrochemical Reduction of CO 2. Acc Chem Res 2022; 55:241-251. [PMID: 35020363 DOI: 10.1021/acs.accounts.1c00617] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
ConspectusElectrochemical reduction of the greenhouse gas CO2 offers prospects for the sustainable generation of fuels and industrially useful chemicals when powered by renewable electricity. However, this electrochemical process requires the use of highly stable, selective, and active catalysts. The development of such catalysts should be based on a detailed kinetic and mechanistic understanding of the electrochemical CO2 reduction reaction (eCO2RR), ideally through the resolution of active catalytic sites in both time (i.e., temporally) and space (i.e., spatially). In this Account, we highlight two advanced spatiotemporal voltammetric techniques for electrocatalytic studies and describe the considerable insights they provide on the eCO2RR. First, Fourier transformed large-amplitude alternating current voltammetry (FT ac voltammetry), as applied by the Monash Electrochemistry Group, enables the resolution of rapid underlying electron-transfer processes in complex reactions, free from competing processes, such as the background double-layer charging current, slow catalytic reactions, and solvent/electrolyte electrolysis, which often mask conventional voltammetric measurements of the eCO2RR. Crucially, FT ac voltammetry allows details of the catalytically active sites or the rate-determining step to be revealed under catalytic turnover conditions. This is well illustrated in investigations of the eCO2RR catalyzed by Bi where formate is the main product. Second, developments in scanning electrochemical cell microscopy (SECCM) by the Warwick Electrochemistry and Interfaces Group provide powerful methods for obtaining high-resolution activity maps and potentiodynamic movies of the heterogeneous surface of a catalyst. For example, by coupling SECCM data with colocated microscopy from electron backscatter diffraction (EBSD) or atomic force microscopy, it is possible to develop compelling correlations of (precatalyst) structure-activity at the nanoscale level. This correlative electrochemical multimicroscopy strategy allows the catalytically more active region of a catalyst, such as the edge plane of two-dimensional materials and the grain boundaries between facets in a polycrystalline metal, to be highlighted. The attributes of SECCM-EBSD are well-illustrated by detailed studies of the eCO2RR on polycrystalline gold, where carbon monoxide is the main product. Comparing SECCM maps and movies with EBSD images of the same region reveals unambiguously that the eCO2RR is enhanced at surface-terminating dislocations, which accumulate at grain boundaries and slip bands. Both FT ac voltammetry and SECCM techniques greatly enhance our understanding of the eCO2RR, significantly boosting the electrochemical toolbox and the information available for the development and testing of theoretical models and rational catalyst design. In the future, it may be possible to further enhance insights provided by both techniques through their integration with in situ and in operando spectroscopy and microscopy methods.
Collapse
Affiliation(s)
| | | | - Minkyung Kang
- Institute for Frontier Materials, Deakin University, Burwood, Victoria 3125, Australia
| | | | - Patrick R. Unwin
- Department of Chemistry, University of Warwick, Coventry CV4 7AL, U.K
| | | |
Collapse
|
46
|
Paiva TO, Schneider A, Bataille L, Chovin A, Anne A, Michon T, Wege C, Demaille C. Enzymatic activity of individual bioelectrocatalytic viral nanoparticles: dependence of catalysis on the viral scaffold and its length. NANOSCALE 2022; 14:875-889. [PMID: 34985473 DOI: 10.1039/d1nr07445h] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
The enzymatic activity of tobacco mosaic virus (TMV) nanorod particles decorated with an integrated electro-catalytic system, comprising the quinoprotein glucose-dehydrogenase (PQQ-GDH) enzyme and ferrocenylated PEG chains as redox mediators, is probed at the individual virion scale by atomic force microscopy-scanning electrochemical atomic force microscopy (AFM-SECM). A marked dependence of the catalytic activity on the particle length is observed. This finding can be explained by electron propagation along the viral backbone, resulting from electron exchange between ferrocene moieties, coupled with enzymatic catalysis. Thus, the use of a simple 1D diffusion/reaction model allows the determination of the kinetic parameters of the virus-supported enzyme. Comparative analysis of the catalytic behavior of the Fc-PEG/PQQ-GDH system assembled on two differing viral scaffolds, TMV (this work) and bacteriophage-fd (previous work), reveals two distinct kinetic effects of scaffolding: An enhancement of catalysis that does not depend on the virus type and a modulation of substrate inhibition that depends on the virus type. AFM-SECM detection of the enzymatic activity of a few tens of PQQ-GDH molecules, decorating a 40 nm-long viral domain, is also demonstrated, a record in terms of the lowest number of enzyme molecules interrogated by an electrochemical imaging technique.
Collapse
Affiliation(s)
- Telmo O Paiva
- Université de Paris, Laboratoire d'Electrochimie Moléculaire, CNRS UMR 7591, F-75013 Paris, France.
| | - Angela Schneider
- University of Stuttgart, Institute of Biomaterials and Biomolecular Systems, Research Unit Molecular and Synthetic Plant Virology, 70569 Stuttgart, Germany.
| | - Laure Bataille
- Université de Bordeaux, Biologie du Fruit et Pathologie, INRA UMR 1332, F-33140 Villenave d'Ornon, France.
| | - Arnaud Chovin
- Université de Paris, Laboratoire d'Electrochimie Moléculaire, CNRS UMR 7591, F-75013 Paris, France.
| | - Agnès Anne
- Université de Paris, Laboratoire d'Electrochimie Moléculaire, CNRS UMR 7591, F-75013 Paris, France.
| | - Thierry Michon
- Université de Bordeaux, Biologie du Fruit et Pathologie, INRA UMR 1332, F-33140 Villenave d'Ornon, France.
| | - Christina Wege
- University of Stuttgart, Institute of Biomaterials and Biomolecular Systems, Research Unit Molecular and Synthetic Plant Virology, 70569 Stuttgart, Germany.
| | - Christophe Demaille
- Université de Paris, Laboratoire d'Electrochimie Moléculaire, CNRS UMR 7591, F-75013 Paris, France.
| |
Collapse
|
47
|
Tolbert CL, Hill CM. Electrochemically probing exciton transport in monolayers of two-dimensional semiconductors. Faraday Discuss 2021; 233:163-174. [PMID: 34897331 DOI: 10.1039/d1fd00052g] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Two-dimensional semiconductors (2DSCs) are attractive for a variety of optoelectronic and catalytic applications due to their ability to be fabricated as wide-area, monolayer-thick films and their unique optical and electronic properties which emerge at this scale. One important class of 2DSCs are the transition metal dichalcogenides (TMDs), which are of particular interest as absorbing layers in ultrathin optoelectronic devices. While TMDs are known to exhibit excellent photovoltaic properties at the bulk level, it is not yet clear how carriers are transported in these materials at thicknesses approaching the monolayer limit, where distinct changes in band structure and the nature of photogenerated carriers occur. Here, it is demonstrated that electrochemical microscopy techniques can be employed as powerful tools for visualizing these processes in 2DSCs, even within individual monolayers. Carrier generation-tip collection scanning electrochemical cell microscopy (CG-TC SECCM), which utilizes spatially-offset optical and pipet-based electrochemical probes to locally generate and detect photogenerated carriers, was applied to visualize carrier generation and transport within well-defined n-WSe2 samples prepared via mechanical exfoliation. Data from these experiments directly reveal how carrier transport varies within complex 2DSC structures as layer thicknesses approach the monolayer limit. These results not only provide valuable new insights into carrier transport within monolayer TMD materials, but also demonstrate electrochemical imaging to be a powerful, yet underutilized approach for visualizing solid-state processes in semiconducting materials.
Collapse
Affiliation(s)
- Chloe L Tolbert
- Department of Chemistry, University of Wyoming, 1000 E. University Ave., Laramie, WY 82071, USA.
| | - Caleb M Hill
- Department of Chemistry, University of Wyoming, 1000 E. University Ave., Laramie, WY 82071, USA.
| |
Collapse
|
48
|
Brunet Cabré M, Paiva AE, Velický M, Colavita PE, McKelvey K. Electrochemical kinetics as a function of transition metal dichalcogenide thickness. Electrochim Acta 2021. [DOI: 10.1016/j.electacta.2021.139027] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
|
49
|
Dorfi AE, Yan J, Wright J, Esposito DV. Compressed Sensing Image Reconstruction of Scanning Electrochemical Microscopy Measurements Carried Out at Ultrahigh Scan Speeds Using Continuous Line Probes. Anal Chem 2021; 93:12574-12581. [PMID: 34496203 DOI: 10.1021/acs.analchem.1c01869] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
Previous studies on scanning electrochemical microscopy (SECM) imaging with nonlocal continuous line probes (CLPs) have demonstrated the ability to increase areal imaging rates by an order of magnitude compared to SECM based on conventional ultramicroelectrode (UME) disk electrodes. Increasing the linear scan speed of the CLP during imaging presents an opportunity to increase imaging rates even further but results in a significant deterioration in image quality due to transport processes in the liquid electrolyte. Here, we show that compressed sensing (CS) postprocessing can be successfully applied to CLP-based SECM measurements to reconstruct images with minimal distortion at probe scan rates greatly exceeding the conventional SECM ″speed limit″. By systematically evaluating the image quality of images generated by adaptable postprocessing CS methods for CLP-SECM data collected at varying scan rates, this work establishes a new upper bound for CLP scan rates. While conventional SECM imaging typically uses probe scan speeds characterized by Péclet numbers (Pe) < 1, this study shows that CS postprocessing methods can allow for an accurate image reconstruction for Pe approaching 5, corresponding to an order of magnitude increase in the maximum probe scan speed. This upper limit corresponds to the onset of chaotic convective flows within the electrolyte for the probes investigated in this work, highlighting the importance of considering hydrodynamics in the design of fast-scanning probes.
Collapse
Affiliation(s)
- Anna E Dorfi
- Department of Chemical Engineering, Columbia University in the City of New York, 500 W. 120th St., New York, New York 10027, United States
| | - Jingkai Yan
- Department of Electrical Engineering, Columbia University in the City of New York, 500 W. 120th St., New York, New York 10027, United States.,Data Science Institute, Columbia University in the City of New York, Northwest Corner, 550 W 120th St. #1401, New York, New York 10027, United States
| | - John Wright
- Department of Chemical Engineering, Columbia University in the City of New York, 500 W. 120th St., New York, New York 10027, United States.,Data Science Institute, Columbia University in the City of New York, Northwest Corner, 550 W 120th St. #1401, New York, New York 10027, United States
| | - Daniel V Esposito
- Department of Chemical Engineering, Columbia University in the City of New York, 500 W. 120th St., New York, New York 10027, United States.,Columbia Electrochemical Energy Center, Columbia University in the City of New York, 500 W. 120th St., New York, New York 10027, United States.,Lenfest Center for Sustainable Energy, Columbia University in the City of New York, 500 W. 120th St., New York, New York 10027, United States
| |
Collapse
|
50
|
Shi Y, Feng G, Li X, Yang X, Ghanim AH, Ruchhoeft P, Jackson D, Mubeen S, Shan X. Electrochemical Impedance Imaging on Conductive Surfaces. Anal Chem 2021; 93:12320-12328. [PMID: 34460223 DOI: 10.1021/acs.analchem.1c02040] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Electrochemical impedance spectroscopy (EIS) is a powerful tool to measure and quantify the system impedance. However, EIS only provides an average result from the entire electrode surface. Here, we demonstrated a reflection impedance microscope (RIM) that allows us to image and quantify the localized impedance on conductive surfaces. The RIM is based on the sensitive dependence between the materials' optical properties, such as permittivity, and their local surface charge densities. The localized charge density variations introduced by the impedance measurements will lead to optical reflectivity changes on electrode surfaces. Our experiments demonstrated that reflectivity modulations are linearly proportional to the surface charge density on the electrode and the measurements show good agreement with the simple free electron gas model. The localized impedance distribution was successfully extracted from the reflectivity measurements together with the Randles equivalent circuit model. In addition, RIM is used to quantify the impedance on different conductive surfaces, such as indium tin oxide, gold film, and stainless steel electrodes. A polydimethylsiloxane-patterned electrode surface was used to demonstrate the impedance imaging capability of RIM. In the end, a single-cell impedance imaging was obtained by RIM.
Collapse
Affiliation(s)
- Yaping Shi
- Department of Electrical & Computer Engineering, University of Houston, 4800 Calhoun Road, Houston, Texas 77004, United States of America
| | - Guangxia Feng
- Department of Electrical & Computer Engineering, University of Houston, 4800 Calhoun Road, Houston, Texas 77004, United States of America
| | - Xiaoliang Li
- Department of Electrical & Computer Engineering, University of Houston, 4800 Calhoun Road, Houston, Texas 77004, United States of America
| | - Xu Yang
- Department of Electrical & Computer Engineering, University of Houston, 4800 Calhoun Road, Houston, Texas 77004, United States of America
| | - Abdulsattar H Ghanim
- Department of Chemical and Biochemical Engineering, University of Iowa, Iowa City, Iowa 52242, United States of America
| | - Paul Ruchhoeft
- Department of Electrical & Computer Engineering, University of Houston, 4800 Calhoun Road, Houston, Texas 77004, United States of America
| | - David Jackson
- Department of Electrical & Computer Engineering, University of Houston, 4800 Calhoun Road, Houston, Texas 77004, United States of America
| | - Syed Mubeen
- Department of Chemical and Biochemical Engineering, University of Iowa, Iowa City, Iowa 52242, United States of America
| | - Xiaonan Shan
- Department of Electrical & Computer Engineering, University of Houston, 4800 Calhoun Road, Houston, Texas 77004, United States of America
| |
Collapse
|