Extraction Method Development for Quantitative Detection of Silver Nanoparticles in Environmental Soils and Sediments by Single Particle Inductively Coupled Plasma Mass Spectrometry

Evaluation of extraction and storage conditions for quantification and characterization of silver nanoparticles in complex samples by single particle-ICP-MS

The extraction of nanoparticles (NPs) from complex matrices and subsequent storage can potentially alter the NPs physicochemical properties and hinder cross-study comparisons. Most NP extraction methods are designed and tested at high nanoparticle concentrations, although (eco)toxicological and regulatory monitoring programs require methods capable of analyzing NPs at environmentally relevant concentrations (lower ppb range). In this study, we investigated how extraction methods affect the characteristics of PVP coated and citrate-stabilized silver NPs (AgNPs) spiked into soil, sewage sludge, and biological samples at environmentally relevant concentrations using Single Particle Inductively Coupled Plasma Mass Spectrometry spICP-MS). Further we investigated the impact of storage temperature (-80°C to 21°C) and storage duration (1-28 days) on the particle characteristics such as particle size. We found that aqueous AgNPs samples with low ionic strength media retained their original characteristics (like particle size, particle concentration and particle-based Ag mass) when preserved at 4°C for up to 28 days. AgNPs dispersed in high ionic strength media were however better preserved at -80°C. Among the extraction agents, tetrasodium pyrophosphate was more efficient in extracting AgNPs from soil and sewage sludge matrices, while Proteinase K was more suitable for biological samples from organisms (earthworms or fish). Although our study focused only on AgNPs, it provides crucial information to aid interlaboratory comparisons and data interpretation for (eco)toxicological studies.

Location-dependent occurrence and distribution of metal-based nanoparticles in bay environments

Metal-based nanoparticles (MNPs) are increasingly being released into the marine environment, posing potential environmental risks. However, factors governing the environmental occurrence and distribution of MNPs in bays still lack a comprehensive understanding. Herein, we collected seawater and sediment samples from two adjacent bays (Daya Bay and Honghai Bay, which have similar water qualities), and determined the particle concentrations and sizes of multi-element MNPs (Ti-, Cu-, Zn-, Ag-, Mn-, Pb- and Cr-based NPs) via single particle inductively coupled plasma-mass spectrometry (spICP-MS). The internal circulation in Daya Bay has resulted in an even distribution of MNPs' particle concentrations and sizes in both seawater and sediments, while the terrestrial discharge in Honghai Bay has led to a gradient-decreasing trend in MNPs' concentrations from nearshore to offshore. Moreover, the relatively high abundance of MNPs in Honghai Bay has contributed to 2.35-fold higher environmental risks than Daya Bay. Overall, this study has provided solid evidence on the critical but overlooked factors that have shaped the occurrence and distribution of MNPs, providing new insights for risk management and emission regulation.

Direct evidence for the occurrence of indigenous cadmium-based nanoparticles in paddy soils

Speciation of heavy metal-based nanoparticles (NPs) in paddy soils greatly determines their fate and potential risk towards food safety. However, quantitative understanding of such distinctive species remains challenging, because they are commonly presented at trace levels (e.g., sub parts-per-million) and extremely difficult to be fractionated in soil matrices. Herein, we propose a state-of-art non-destructive strategy for effective extraction and quantification of cadmium (Cd)-NPs - the most widespread heavy metal in paddy soils - by employing single particle inductively coupled plasma mass spectrometry (spICP-MS) and tetrasodium pyrophosphate (TSPP) as the extractant. Acceptable extraction efficiencies (64.7-80.4 %) were obtained for spiked cadmium sulfide nanoparticles (CdS-NPs). We demonstrate the presence of indigenous Cd-NPs in all six Cd-contaminated paddy soils tested, with a number concentration ranging from 2.20 × 108 to 3.18 × 109 particles/g, representing 17.0-50.4 % of the total Cd content. Furthermore, semi-spherical and irregular CdS-NPs were directly observed as an important form of the Cd-NPs in paddy soils, as characterized by transmission electron microscopy coupled with energy-dispersive X-ray spectroscopy (TEM-EDX). This research marks a significant step towards directly observing indigenous Cd-NPs at trace levels in paddy soil, offering a useful tool for quantitative understanding of the biogeochemical cycling of heavy metal-based NPs in complex matrices.

Determination of metallic nanoparticles in soils by means spICP-MS after a microwave-assisted extraction treatment

Current sample preparation strategies for nanomaterials (NMs) analysis in soils by means single particle inductively coupled plasma mass spectrometry have significant constrains in terms of accuracy, sample throughput and applicability (i.e., type of NMs and soils). In this work, strengths and weakness of microwave assisted extraction (MAE) for NMs characterization in soils were systematically investigated. To this end, different extractants were tested (ultrapure water; NaOH, NH4OH, sodium citrate and tetrasodium pyrophosphate) and MAE operating conditions were optimized by means of design of experiments. Next, the developed method was applied to different type of metallic(oid) nanoparticles (Se-, Ag-, Pt- and AuNPs) and soils (alkaline, acid, sandy, clayey, SL36, loam ERMCC141; sludge amended ERM483). Results show that Pt- and AuNPs are preserved and quantitatively extracted from soils in 6 min (12 cycles of 30 s each) inside an 800 W oven by using 20 mL of 0.1 M NaOH solution. This methodology is applicable to soils showing a wide range of physicochemical properties except for clay rich samples. If clay soil fraction is significant (>15%), NMs are efficiently retained in the soil thus giving rise to poor recoveries (<10%). The analysis of labile NMs such as Se- and AgNPs is not feasible by means this approach since extraction conditions favors dissolution. Finally, when compared to current extraction methodologies (e.g., ultrasound, cloud point extraction, etc.), MAE affords better or equivalent accuracies and precision as well as higher sample throughput due to treatment speed and the possibility to work with several samples simultaneously.

Speciation of Selenium Nanoparticles and Other Selenium Species in Soil: Simple Extraction Followed by Membrane Separation and ICP-MS Determination

The application of selenium nanoparticle (SeNP)-based fertilizers can cause SeNPs to enter the soil environment. Considering the possible transformation of SeNPs and the species-dependent toxicity of selenium (Se), accurate analysis of SeNPs and other Se species present in the soil would help rationally assess the potential hazards of SeNPs to soil organisms. Herein, a novel method for speciation of SeNPs and other Se species in soil was established. Under the optimized conditions, SeNPs, selenite, selenate, and seleno amino acid could be simultaneously extracted from the soil with mixtures of tetrasodium pyrophosphate (5 mM) and potassium dihydrogen phosphate (1.2 μM), while inert Se species (mainly metal selenide) remained in the soil. Then, extracted SeNPs can be effectively captured by a nylon membrane (0.45 μm) and quantified by inductively coupled plasma mass spectrometry (ICP-MS). Other extracted Se species can be separated and quantified by high-performance liquid chromatography coupled with ICP-MS. Based on the difference between the total Se contents and extracted Se contents, the amount of metal selenide can be calculated. The limits of detection of the method were 0.02 μg/g for SeNPs, 0.05 μg/g for selenite, selenate, and selenocystine, and 0.25 μg/g for selenomethionine, respectively. Spiking experiments also showed that our method was applicable to real soil sample analysis. The present method contributes to understanding the speciation of Se in the soil environment and further estimating the occurrence and application risks of SeNPs.

Detection, distribution and environmental risk of metal-based nanoparticles in a coastal bay

Metal-based nanoparticles (NPs) attract increasing concerns because of their adverse effects on aquatic ecosystems. However, their environmental concentrations and size distributions are largely unknown, especially in marine environments. In this work, environmental concentrations and risks of metal-based NPs were examined in Laizhou Bay (China) using single-particle inductively coupled plasma-mass spectrometry (sp-ICP-MS). First, separation and detection approaches of metal-based NPs were optimized for seawater and sediment samples with high recoveries of 96.7% and 76.3%, respectively. Spatial distribution results showed that Ti-based NPs had the highest average concentrations for all the 24 stations (seawater, 1.78 × 108 particles/L; sediments, 7.75 × 1012 particles/kg), followed by Zn-, Ag-, Cu-, and Au-based NPs. For all the NPs in seawater, the highest abundance occurred around the Yellow River Estuary, resulting from a huge input from Yellow River. In addition, the sizes of metal-based NPs were generally smaller in sediments than those in seawater (22, 20, 17, and 16 of 22 stations for Ag-, Cu-, Ti-, and Zn-based NPs, respectively). Based on the toxicological data of engineered NPs, predicted no-effect concentrations (PNECs) to marine species were calculated as Ag at 72.8 ng/L < ZnO at 2.66 µg/L < CuO at 7.83 µg/L < TiO2 at 72.0 µg/L, and the actual PNECs of the detected metal-based NPs may be higher due to the possible presence of natural NPs. Station 2 (around the Yellow River Estuary) was assessed as "high risk" for Ag- and Ti-based NPs with risk characterization ratio (RCR) values of 1.73 and 1.66, respectively. In addition, RCRtotal values for all the four metal-based NPs were calculated to fully assess the co-exposure environmental risk, with 1, 20, and 1 of 22 stations as "high risk", "medium risk", and "low risk", respectively. This study helps to better understand the risks of metal-based NPs in marine environments.

Comparative study of extraction methods of silver species from faeces of animals fed with silver-based nanomaterials

Extractions methods based on ultrapure water, tetramethylammonium hydroxide (TMAH), and tetrasodium pyrophosphate (TSPP) were applied to faeces collected from two in vivo experiments of pigs and chickens fed with a silver-based nanomaterial to study the fate and speciation of silver. For TMAH extraction, cysteine and CaCl₂ were used to evaluate their stabilization effect on the silver forms. The analytical techniques single-particle inductively coupled plasma mass spectrometry (SP-ICP-MS), hydrodynamic chromatography hyphenated to ICP-MS (HDC-ICP-MS) and asymmetric flow field flow fractionation coupled to ICP-MS (AF4-ICP-MS) were applied to the simultaneous detection of particulate and dissolved silver. Results have shown that water extraction was a suitable option to assess the environmental release of silver, with percentages of 3 and 9% for faeces of pigs and chickens, respectively. The use of TMAH extraction combined with SP-ICP-MS analysis was useful to characterize Ag-containing particles (less than 1%). Both stabilizers, cysteine and CaCl₂, have a similar effect on silver nanoparticle preservation for chicken faeces, whereas cysteine-Triton was better for pig samples. In any case, silver extraction efficiency with TMAH was low (39-42%) for both types of faeces due to a matrix effect. TSPP followed by ICP-MS enabled the fractionation of the silver in the faeces, with silver sulphide (41%) and ionic silver (62%) being the most abundant fractions.

Determination of the Particle Number Concentration, Size Distribution, and Species of Dominant Silver-Containing Nanoparticles in Soils by Single-Particle ICP-MS

The potential risk of various silver-containing nanoparticles (AgCNPs) in soils is related to the concentration, size, and speciation, but their determination remains a great challenge. Herein, we developed an effective method for determining the particle number, size, and species of dominant AgCNPs in soils, including nanoparticles of silver (Ag NPs), silver chloride (AgCl NPs), and silver sulfide (Ag₂S NPs). By ultrasonication wand-assisted tetrasodium pyrophosphate extraction, these AgCNPs were extracted efficiently from soils. Then, multistep selective dissolution of Ag NPs, AgCl NPs, and whole Ag NPs/AgCl NPs/Ag₂S NPs was achieved by 1% (v/v) H₂O₂, 5% (v/v) NH₃·H₂O, and 10 mM thiourea in 2% (v/v) acetic acid, respectively. Finally, the particle number concentration and size distribution of AgCNPs in the extracts and the remaining AgCNP particle number concentration after each dissolution were determined by single-particle inductively coupled plasma mass spectroscopy for speciation of the dominant AgCNPs. AgCNPs were detected in all five soil samples with the concentrations of 0.23-8.00 × 10⁷ particles/g and sizes of 16-110 nm. Ag₂S NPs were the main form of AgCNPs in the examined soils with the percentage range of 53.98-69.19%, followed by AgCl NPs (11.42-23.31%) and Ag NPs (7.78-16.19%). Our method offers a new approach for evaluating the occurrence and potential risk of AgCNPs in environmental soils.

Single particle ICP-MS combined with filtration membrane for accurate determination of silver nanoparticles in the real aqueous environment

This work presents the role of commercial microfiltration membranes combined with single particle inductively coupled plasma-mass spectrometry (SP-ICP-MS) in removing environmental matrix interference for model silver nanoparticles (AgNPs) determination. The filters with different pore sizes (0.22 μm, 0.45 μm, 0.8 μm) and materials (mixed cellulose ester, polyether sulfone, and nylon) were investigated to acquire the recovery of particle concentration and size of AgNPs spiked into different real aqueous solutions, including ultrapure water, tap water, surface water, and sewage effluent. The maximum recovery of nanoparticle concentration was 70.2% through the 0.8 μm polyether sulfone membrane. The heated filters were able to improve the recovery of AgNPs particle concentration in the real aqueous environment. Hence, the pretreatment method by SP-ICP-MS combined with filtration membrane was simple, fast, and low-cost to quantify AgNPs in natural water environments.

Effects of Platinum Nanoparticles on Rice Seedlings (Oryza sativa L.): Size-dependent Accumulation, Transformation, and Ionomic Influence

Platinum nanoparticles (PtNPs) are increasing in the environment largely due to their wide use and application in automobile and medical industries. The mechanism of uptake behavior of different-sized PtNPs and their association with PtNPs-induced phytotoxicity to plants remains unclear. The present study investigated PtNP uptake mechanisms and phytotoxicity simultaneously to further understand the accumulation and transformation dynamics. The uptake mechanisms were investigated by comparing the uptake and toxicological effects of three different-sized PtNPs (25, 50, and 70 nm) on rice seedlings across an experimental concentration gradient (0.25, 0.5, and 1 mg/L) during germination. The quantitative and qualitative results indicated that 70 nm-sized PtNPs were more efficiently transferred in rice roots. The increase in the PtNP concentration restricted the particle uptake. Particle aggregation was common in plant cells and tended to dissolve on root surfaces. Notably, the dissolution of small particles was simultaneous with the growth of larger particles after PtNPs entered the rice tissues. Ionomic results revealed that PtNP accumulation induced element homeostasis in the shoot ionome. We observed a significant positive correlation between the PtNP concentration and Fe and B accumulation in rice shoots. Compared to particle size, the exposure concentration of PtNPs had a stronger effect on the shoot ionomic response. Our study provides better understanding of the correlation of ionomic change and NP quantitative accumulation induced by PtNPs in rice seedlings.

Extraction and quantification of polystyrene nanoplastics from biological samples

Accurate quantification of nanoplastics (NPs) in complex matrices remains a challenge, especially for biological samples containing high content of organic matters. Herein, a new method extracting and quantifying polystyrene (PS) NPs from biological samples was developed. The extraction included alkaline digestion, centrifugation, and cloud point extraction (CPE), and the quantification included gold nanoparticles formation and labeling on surfaces of the extracted NPs and thereafter measurement with single particle inductively coupled plasma mass spectrometry (SP-ICP-MS). Results show that 25% tetramethylammonium hydroxide solution was an effective alkaline digestion solution for biological matrices, and CPE after centrifugation (3000 rpm, 10 min) was applicable to purify and enrich PS NPs with different sizes (100 and 500 nm) and surface functionalities (-COOH and -NH₂ modifications) from the digestion solution. The efficiency of Au labeling on PS NPs surface was improved by about 70% in the presence of 100 μM cetyltrimethylammonium bromide. The performance of the quantification method was examined by extraction and measurement of PS NPs spiked in four representative organism samples including bacteria, algae, nematode, and earthworm, and was further validated by analyzing the accumulated PS NPs in exposed nematodes. Good recovery rates (65 ± 10%-122 ± 22%) were achieved for spiking levels of 5-50 μg g^-1; the limit of detection was 3.7 × 10⁷ particles g^-1, corresponding to the mass concentration of about 0.02 and 2.5 μg g^-1 for the 100 nm and 500 nm PS NPs, respectively. The established extraction and quantification methods are efficient and sensitive, providing a useful approach for further exploring the environmental behavior and toxicity of NPs.

Potential impacts of titanium dioxide nanoparticles on trace metal speciation in estuarine sediments

Engineered titanium dioxide (TiO₂) nanoparticles (NPs) are widely used and consequently released into the environment. The subsequent accumulation of TiO₂ NPs in depositional environments may affect the geochemical behavior of trace metals, which needs to be assessed. Here, we performed experiments to investigate the speciation change for molybdenum and tungsten in the presence of TiO₂ NPs. Laboratory results show that the rate constant for MoS₄^2- hydrolysis associated with TiO₂ NPs is ~1.75 × 10^-9 L m^-2 s^-1, whereas it is 5.95 × 10^-10 L m^-2 s^-1 for WS₄^2- hydrolysis. In addition, we estimated the maximum rate for MoS₄^2- hydrolysis to be ~1.24 × 10^-1 μM hr^-1, whereas the maximum rate for WS₄^2- hydrolysis is ~4.91 × 10^-2 μM hr^-1. However, the modeling results suggest that the TiO₂ NPs accumulated in estuarine sediments might play a relatively minor role in affecting the speciation of trace metals prior to the current time. This is because the relatively low accumulation (i.e., < 8 × 10^-3 mol kg^-1) of TiO₂ NPs before 2021 results in the lower rate (>100 times) for speciation changes of both molybdenum and tungsten compared to the rate for natural geochemical processes. On the other hand, our results suggest that TiO₂ NPs will likely impact the oxyanion cycling in the near future owing to the increasing accumulations of TiO₂ NPs in estuarine sediments.

Discrimination and Quantification of Soil Nanoparticles by Dual-Analyte Single Particle ICP-QMS

This study presents the new application of dual-analyte single particle inductively coupled plasma quadrupole mass spectrometry (spICP-QMS) to the discrimination and quantification of two typical soil nanoparticles (kaolinite and goethite nanoparticles, abbr. KNPs and GNPs) in three samples (SA, SB, and SC) with three detection events (Al unpaired event, Fe unpaired event, and paired event). SA was mainly composed of KNPs with a concentration of 28 443 ± 817 particle mL^-1 and a mean particle size of 140.7 ± 0.2 nm. SB was mainly composed of GNPs with a concentration of 39 283 ± 702 particle mL^-1 and a mean particle size of 141.8 ± 2.9. In SC, the concentrations of KNPs and GNPs were 22 4541 ± 1401 and 70 604 ± 1623 particle mL^-1, respectively, and the mean particle sizes of KNPs and GNPs were 140.7 ± 0.2 and 60.2 ± 0.3 nm, respectively. The accuracy of dual-analyte spICP-QMS was determined by spiking experiments, comparing these results with the measurements of other techniques, analyzing the samples in different SA and SB proportions and in different SC concentrations. Our results demonstrated that the dual-analyte spICP-QMS is a promising approach to distinguishing different kinds of natural NPs in soils.

Current Methods and Prospects for Analysis and Characterization of Nanomaterials in the Environment

Analysis and characterization of naturally occurring and engineered nanomaterials in the environment are critical for understanding their environmental behaviors and defining real exposure scenarios for environmental risk assessment. However, this is challenging primarily due to the low concentration, structural heterogeneity, and dynamic transformation of nanomaterials in complex environmental matrices. In this critical review, we first summarize sample pretreatment methods developed for separation and preconcentration of nanomaterials from environmental samples, including natural waters, wastewater, soils, sediments, and biological media. Then, we review the state-of-the-art microscopic, spectroscopic, mass spectrometric, electrochemical, and size-fractionation methods for determination of mass and number abundance, as well as the morphological, compositional, and structural properties of nanomaterials, with discussion on their advantages and limitations. Despite recent advances in detecting and characterizing nanomaterials in the environment, challenges remain to improve the analytical sensitivity and resolution and to expand the method applications. It is important to develop methods for simultaneous determination of multifaceted nanomaterial properties for in situ analysis and characterization of nanomaterials under dynamic environmental conditions and for detection of nanoscale contaminants of emerging concern (e.g., nanoplastics and biological nanoparticles), which will greatly facilitate the standardization of nanomaterial analysis and characterization methods for environmental samples.

Characterization of AgNPs and AuNPs in sewage sludge by single particle inductively coupled plasma-mass spectrometry

This study develops for the first time an analytical method for the characterization of silver and gold nanoparticles in sewage sludge. The evaluation of the effect of temperature, extracting agent and centrifugation speed and time on the extraction yield was carried out through a multifactorial analysis of variance which allows us to select 289 g, 5 min and 20 mM sodium pyrophosphate tetrabasic as optimal extraction conditions. Under these conditions, the analysis of the extract by single particle inductively coupled plasma-mass spectrometry provided recovery percentages of 70 ± 2% and 56 ± 1% for silver and gold nanoparticles, respectively. Moreover, the complementary results obtained upon analysis of these extracts by transmission electron microscopy and single particle inductively coupled plasma-mass spectrometry showed that the developed method did not modify the original size and shape of these nanoparticles during the extraction procedure. Size detection limits of 23 nm and 16 nm as well as number concentration limits of 3.12 × 10⁹ particles kg^-1 and 1.38 × 10⁹ particles kg^-1 were obtained for silver and gold nanoparticles, respectively. Moreover, a stability study of silver and gold nanoparticles in sewage sludge for 12 months showed differences between the two nanoparticle types. Although the sizes were not affected during the 12 months, silver nanoparticles underwent an oxidation process from 6 months onwards, which was reflected in an increase in the percentage of ionic silver from 14 ± 1% at 6 months to 24 ± 2% at 12 months. The developed methodology represents a simple, reliable and fast tool for detecting, quantifying and assessing the stability of nanoparticles in an important environmental sample such as sewage sludge.

Extraction and Quantification of Nanoparticulate Mercury in Natural Soils

Nanoparticulate mercury (Hg-NPs) are ubiquitous in nature. However, the lack of data on their concentration in soils impedes reliable risk assessments. This is due to the analytical difficulties resulting from low ambient Hg concentrations and background interferences of heterogeneous soil components. Here, coupled to single particle inductively coupled plasma-mass spectrometry (spICP-MS), a standardized protocol was developed for extraction and quantification of Hg-NPs in natural soils with a wide range of properties. High particle number-, particle mass-, and total mass-based recoveries were obtained for spiked HgS-NPs (74-120%). Indigenous Hg-NPs across soils were within 10⁷-10¹¹ NPs g^-1, corresponding to 3-40% of total Hg on a mass basis. Metacinnabar was the primary Hg species in extracted samples from the Wanshan mercury mining site, as characterized by X-ray absorption spectroscopy and transmission electron microscopy. In agreement with the spICP-MS analysis, electron microscopy revealed comparable size distribution for nanoparticles larger than 27 nm. These indigenous Hg-NPs contributed to 5-65% of the measured methylmercury in soils. This work paves the way for experimental determinations of indigenous Hg-NPs in natural soils, which is critical to understand the biogeochemical cycling of mercury and thereby the methylation processes governing the public exposure to methylmercury.

Cloud point extraction (CPE) combined with single particle -inductively coupled plasma-mass spectrometry (SP-ICP-MS) to analyze and characterize nano-silver sulfide in water environment

Silver Nanoparticles (Ag-NPs), an emerging type of pollutant, might occur various physical and chemical transformations, which would affect its environmental fate, transformation and biological effects. Sulfurization is the most common conversion of Ag-NPs, accompanied by the formation of nano-silver sulfide (Ag₂S-NPs). The method of Ag₂S-NPs analysis and characterization is of great significance for assessing the environmental risks of Ag. In this study, cloud point extraction (CPE) and Single Particle-Inductively Coupled Plasma-Mass Spectrometry (SP-ICP-MS) were used in combination to establish a simple and reliable analysis method to quantify Ag₂S-NPs in water, with the morphology unchanged. Non-Ag₂S-NPs were dissociated into Ag⁺ firstly, and Ag₂S-NPs and Ag⁺ were separated by CPE, followed by SP-ICP-MS analysis. The extraction rate based on particle number concentration was between (76.19 ± 0.56) % to (106.35 ± 0.00) % in environmental waters. Compared with the (76.96 ± 2.18) nm Ag₂S-NPs spiked, the particle size extracted increased slightly with (94.19 ± 2.72) nm- (97.25 ± 0.22) nm as the large-size Ag₂S-NPs originally presented in waters, instead of agglomeration. This method could be generally applicable to the analysis of Ag₂S-NPs in waters, and provide ideas for other metal sulfide nanoparticles (MS-NPs), which has certain significance.

Silver nanoparticles in aquatic sediments: Occurrence, chemical transformations, toxicity, and analytical methods

Sediments represent the major sink for released silver nanoparticles (AgNPs) in aquatic environments. It is well known that the environmental behavior and toxicity of AgNPs in sediments are governed by their specific chemical species instead of their total concentration. This review focuses on various chemical transformations of AgNPs in sediments, which have not been well outlined before. We first outline the concentrations of AgNPs in sediments. The predicted concentrations are 1-5 µg kg^-1 in most model studies. Once enter sediments, AgNPs are transformed to different species (e.g., Ag₂S, Ag-humic substance complexes, AgCl, and Ag⁺) during multiple chemical transformations, such as oxidative dissolution, sulfidation, chlorination, and complexation. Those chemical behaviors mitigate the toxicity of AgNPs by reducing their availability and decreasing Ag⁺ release. Benthic invertebrates and microbes are prone to be affected by AgNPs. AgNPs are found to be accumulated in sediment-dwelling organisms and transferred to higher trophic levels along the food web. Besides X-ray absorption spectroscopy, reliable separation procedures coupled with detection techniques, are powerful tools that characterize the speciation of AgNPs in sediments. More research is needed to investigate diverse chemical transformations in various sediments through development of novel techniques and mathematical models.

Simple Method for the Extraction and Determination of Ti-, Zn-, Ag-, and Au-Containing Nanoparticles in Sediments Using Single-Particle Inductively Coupled Plasma Mass Spectrometry

The quantitative analysis of nanoparticles (NPs) in the environment is significantly important for the exploration of the occurrence, fate, and toxicological behaviors of NPs and their subsequent environmental risks. Some protocols have been recommended for the separation and extraction of NPs that are potentially dispersed in complex environmental matrixes, e.g. sediments and soils, but they remain limited. However, certain factors that may significantly affect extraction efficiency have not been comprehensively explored. In this study, on the basis of the single-particle inductively coupled plasma mass spectrometry (SP-ICP-MS) technique, a simple standardized protocol for separating and analyzing metal-containing NPs in sediment samples was developed. On consideration of the extraction efficiencies of indigenous NPs (Ti- and Zn-NPs) and spiked NPs (Ag- and Au-NPs) in sediments, sedimentation with a settling time of 6 h is recommended for the separation of NPs and large particles, and the optimal sediment to water ratio, ultrasonication power, time, and temperature are 0.4 mg/mL, 285 W, 20 min, and 15-25 °C, respectively. On the basis of the optimized method, the recoveries of spiked Ag and Au-NPs were 71.4% and 81.1%, respectively. The applicability of the optimal protocols was verified, and TOC was proved to be an important factor controlling the separation and extraction of NPs in environmental samples. The separation and extraction of NPs in elevated TOC samples can be improved by increasing the ultrasonication power, time, and temperature.

Separation and Analysis of Nanoscale Zero-Valent Iron from Soil

Nanoscale zero-valent iron (nZVI) has become one of the most used engineered nanoparticles for soil remediation. However, isolating nZVI particles from a complex soil matrix for their accurate particle characterizations and transport distance measurements is still challenging. Here, this study established a new analysis approach combining ultrasound-assisted solvent extraction, magnetic separation, and single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) analysis to isolate nZVI particles from soils and quantify their concentration and size. The interference from natural Fe-containing substances on nZVI analysis could be efficiently minimized by magnetic separation and dilution. After the optimization of extraction solvent type/concentration (i.e., 2.5 mM tetrasodium pyrophosphate) and ultrasonication time (i.e., 30 min), acceptable recoveries in both particle number (62.0 ± 10.8%-96.1 ± 4.8%) and Fe mass (70.6 ± 12.0%-119 ± 18%) could be achieved for different sizes (50 and 100 nm) and concentrations (50, 100, and 500 μg g^-1) of spiked nZVI from six soils. The detection limits of particle size and concentration were approximately 43.1 nm and 50 μg nZVI per gram soil, respectively. These results provide a feasible approach to quantify the nZVI concentration and size in complex soil matrices, which will allow the improvements to characterize and track the nZVI particles in the field, promote the use of nZVI particles for soil remediation, and better assess their environmental implications.

Enzyme digestion combined with SP-ICP-MS analysis to characterize the bioaccumulation of gold nanoparticles by mustard and lettuce plants

Plants can absorb and accumulate engineered nanomaterials (ENMs) through water and soil, providing a potential way for nanoparticles to be enriched in humans through the food chain. In this paper, a combination of enzymatic digestion method and SP-ICP-MS analysis was used to quantitatively characterize the enriched AuNPs in mustard and lettuce plants. The results showed that Macerozyme R-10 enzyme can extract AuNPs from plants without obvious aggregation/dissolution. Both mustard and lettuce plants can absorb and enrich the complete AuNPs to the above-ground organs, and the particle number concentrations detected are 1.24 × 107 particles L-1 and 4.39 × 107 particles L-1, respectively. With different exposure level of AuNPs(0.5 mg L-1,), a particle number concentration of 2.32 × 107 particles L-1 was detected in the stems of lettuce plants, while the mustard failed to transport AuNPs to the above-ground organs. The transport efficiency of Au ions by plants is higher than that of AuNPs, and the plants have stronger bioavailability for ions.

Mass spectrometry for multi-dimensional characterization of natural and synthetic materials at the nanoscale

Characterization of materials at the nanoscale plays a crucial role in in-depth understanding the nature and processes of the substances. Mass spectrometry (MS) has characterization capabilities for nanomaterials (NMs) and nanostructures by offering reliable multi-dimensional information consisting of accurate mass, isotopic, and molecular structural information. In the last decade, MS has emerged as a powerful nano-characterization technique. This review comprehensively summarizes the capabilities of MS in various aspects of nano-characterization that greatly enrich the toolbox of nano research. Compared with other characterization techniques, MS has unique capabilities for real-time monitoring and tracking reaction intermediates and by-products. Moreover, MS has shown application potential in some novel aspects, such as MS imaging of the biodistribution and fate of NMs in animals and humans, stable isotopic tracing of NMs, and risk assessment of NMs, which deserve update and integration into the current knowledge framework of nano-characterization.

Detection, occurrence, and fate of emerging contaminants in agricultural environments (2020)

A review of 79 papers published in 2019 is presented. The topics ranged from detailed descriptions of analytical methods, to fate and occurrence studies, to ecological effects and sampling techniques for a wide variety of emerging contaminants likely to occur in agricultural environments. New methods and studies on veterinary pharmaceuticals, antibiotics, anthelmintics, and engineered nanomaterials in agricultural environments continue to expand our knowledge base on the occurrence and potential impacts of these compounds. This review is divided into the following sections: Introduction, Analytical Methods, Antibiotics in Agroecosystems, Pharmaceutical Fate and Occurrence, Anthelmintics and Engineered Nanomaterials. PRACTITIONER POINTS: New research describes innovative new techniques for emerging contaminant detection in agricultural settings Newer classes of contaminants include human and veterinary pharmaceuticals Research in nanomaterials show that these also occur in agricultural environments and will likely be topics of future work.

Determination and characterization of metal nanoparticles in clams and oysters

With the extensive application of nanotechnology, metal nanoparticles (MNPs) have been widely used, thus are universally detected in the environment. This has caused increasingly concerns due to their toxicity and the potential health risks they pose to humans. In this work, the concentrations and particle size distributions of MNPs and concentrations of associated metal ionic species in shellfish seafood (clams and oysters) were investigated using single particle inductively coupled plasma mass spectrometry (sp-ICP-MS) and inductively coupled plasma mass spectrometry (ICP-MS). The MNPs in the clam and oyster tissues were extracted via an alkaline digestion method with a recovery rate of 95.9% (for gold nanoparticles (AuNPs)). Then total concentrations of 41 metal elements were measured in the two types of seafood, of which 20 were selected for sp-ICP-MS analysis. The results showed that 5 types of MNPs were detectable in clams (Y, La, Ce, Pr, Gd) and 5 types of MNPs were detectable in oysters (Y, La, Ce, Pr, Nd). Size distributions of MNPs in clams and oysters were in the range of 35-55 nm and 30-65 nm, respectively. Nanoparticle concentrations in clams and oysters ranged from 0.6 to 37.7 ng/g and 4.2-19.7 ng/g, and accounted for 3.4%-50% and 5.5%-46% of the total metal content, respectively. Based on this analysis, the health risks of metals in the two kinds of seafood were evaluated by comparing the Provisional Tolerable Weekly Intake (PTWI) with limits recommended by the World Health Organization (WHO)/Food and Agriculture Organization (FAO). These results provide important information about the presence of metal nanoparticles in seafood and, to the best of our knowledge, this is the first time that the nanoparticles of rare earth elements have been detected and reported in bivalve mollusc tissues.

Contrasting effects of iron plaque on the bioavailability of metallic and sulfidized silver nanoparticles to rice

Interaction between silver nanoparticles (AgNPs) and iron plaque, which forms at the root surface of wetland plants under waterlogging conditions, is a critical process that controls the bioavailability of AgNPs. In this study, we comparatively evaluated how and to what extent iron plaque affected silver uptake sourced from metallic (Ag⁰NPs) and sulfidized (Ag₂S-NPs) silver nanoparticles under hydroponic conditions. After the formation of iron plaque at the root surface upon exposure to Fe²⁺ at 0-100 μg mL^-1, rice (Oryza sativa L.) seedlings were transferred to AgNP suspensions. Silver uptake depended on the amount of iron plaque and AgNP species (Ag⁰NPs vs. Ag₂S-NPs): Ag₂S-NP exposure had lower or comparable Ag uptake to that of Ag⁰NP exposure at low levels of Fe²⁺ (0-80 μg mL^-1), but significantly higher Ag uptake at 100 μg Fe²⁺ mL^-1. Such contrasting effects of iron plaque on the bioavailability of Ag⁰NPs and Ag₂S-NPs were attributed to their influences on AgNP dissolution. However, the translocation factors (TFs) and particle size distribution of NPs in planta (as determined by single-particle inductively coupled plasma-mass spectrometry analysis) were not affected by the amount of iron plaque. These results reveal contrasting effects of iron plaque on the bioavailability of Ag⁰NPs and Ag₂S-NPs, and raise concerns about the exposure of wetland plants to Ag₂S-NPs in Fe-rich environments, where high Fe levels may facilitate Ag₂S-NP bioavailability.