Matrix Coordination-Induced Electrochemiluminescence Enhancement of Tetraphenylethylene-Based Hafnium Metal–Organic Framework: An Electrochemiluminescence Chromophore for Ultrasensitive Electrochemiluminescence Sensor Construction

Ratiometric electrochemiluminescence sensing and intracellular imaging of ClO- via resonance energy transfer

Electrochemiluminescence resonance energy transfer (ECL-RET) is a versatile signal transduction strategy widely used in the fabrication of chem/biosensors. However, this technique has not yet been applied in visualized imaging analysis of intracellular species due to the insulating nature of the cell membrane. Here, we construct a ratiometric ECL-RET analytical method for hypochlorite ions (ClO-) by ECL luminophore, with a luminol derivative (L-012) as the donor and a fluorescence probe (fluorescein hydrazide) as the acceptor. L-012 can emit a strong blue ECL signal and fluorescein hydrazide has negligible absorbance and fluorescence signal in the absence of ClO-. Thus, the ECL-RET process is turned off at this time. In the presence of ClO-, however, the closed-loop hydrazide structure in fluorescein hydrazide is opened via specific recognition with ClO-, accompanied with intensified absorbance and fluorescence signal. Thanks to the spectral overlap between the ECL spectrum of L-012 and the absorption spectrum of fluorescein, the ECL-RET effect is gradually recovered with the addition of ClO-. Furthermore, the ECL-RET system has been successfully applied to image intracellular ClO-. Although the insulating nature of the cell itself can generate a shadow ECL pattern in the cellular region, extracellular ECL emission penetrates the cell membrane and excites intracellular fluorescein generated by the reactions between fluorescein hydrazide and ClO-. The cell imaging strategy via ECL-RET circumvents the blocking of the cell membrane and enables assays of intracellular species. The importance of the ECL-RET platform lies in calibrating the fluctuation from the external environment and improving the selectivity by using fluorescent probes. Therefore, this ratiometric ECL sensor has shown broad application prospects in the identification of targets in clinical diagnosis and environmental monitoring.

Strong aggregation-induced electrochemiluminescence of pyrene-coordination metal-organic frameworks coupled with zero-valent iron as novel accelerator for ultrasensitive immunoassay

Polycyclic aromatic hydrocarbons (PAHs) are excellent alternative luminophores for electrochemiluminescence (ECL) immunoassays. However, they are inevitably limited by the aggregation-caused quenching effect. In this study, aimed at eliminating the aggregation quenching of PAHs, luminescent metal-organic frameworks (MOFs) with 1,3,6,8-tetra(4-carboxybenzene)pyrene (H4TBAPy) as the ligand were exploited as a novel nano-emitter for the construction of ECL immunoassays. The luminophore exhibits efficient aggregation-induced emission enhancement, good acid-base resistance property and unusual ECL reactivity. In addition, the simultaneous use of potassium persulfate and hydrogen peroxide as dual co-reactants resulted in a synergistic enhancement of the cathodic ECL efficiency. The use of magnetic iron-nickel alloys as the multifunctional sensing platform can further enhance the ECL activity, and its enriched zero-valent iron as a co-reactant accelerator effectively drives ECL analytical performance. Profiting from the excellent characteristics, signal-on ECL immunoassays have been constructed. With carcinoembryonic antigen as the model analysis target, a detection limit of 0.63 pg/mL was obtained within the linear range of 1 pg/mL to 50 ng/mL, accompanied by excellent analytical performance. This report opens a new window for the rational design of efficient ECL illuminators, and the proposed ECL immunoassays may find promising applications in the detection of disease markers.

Pyrenetetrasulfonate-grafted 2D ultrathin metal-organic layer as new electrochemiluminescence emitters for ultrasensitive microRNA-21 assay

The exploration of novel electrochemiluminescence (ECL) luminophores with excellent ECL properties is a current research hotspot in the ECL field. Herein, a novel high-efficiency Ru-complex-free ECL emitter PyTS-Zr-BTB-MOL has been prepared by using porous ultrathin Zr-BTB metal-organic layer (MOL) as carrier to coordinatively graft the cheap and easily available polycyclic aromatic hydrocarbon (PAH) derivative luminophore PyTS whose ECL performance has never been investigated. Gratifyingly, the ECL intensity and efficiency of PyTS-Zr-BTB-MOL were markedly enhanced compared to both PyTS monomers and PyTS aggregates. The main reason was that the distance between pyrene rings was greatly expanded after the PyTS grafting on the Zr6 clusters of Zr-BTB-MOL, which overcame the aggregation-caused quenching (ACQ) effect of PyTS and thus enhanced the ECL emission. Meanwhile, the porous nanosheet structure of PyTS-Zr-BTB-MOL could distinctly increase the exposure of PyTS luminophores and shorten the diffusion paths of coreactants and electrons/ions, which effectively promoted the electrochemical excitation of more PyTS luminophores and thus achieved a further ECL enhancement. In light of the remarkable ECL property of PyTS-Zr-BTB-MOL, it was employed as an ECL indicator to build a novel high-sensitivity ECL biosensor for microRNA-21 determination, possessing a satisfactory response range (100 aM to 100 pM) and an ultralow detection limit (10.4 aM). Overall, this work demonstrated that using MOLs to coordinatively graft the PAH derivative luminophores to eliminate the ACQ effect and increase the utilization rate of the luminophores is a promising and efficient strategy to develop high-performance Ru-complex-free ECL materials for assembling ultrasensitive ECL biosensing platforms.

Precision in cancer diagnostics: ultra-sensitive detection of MCF-7 breast cancer cells by gold nanostructure-enhanced electrochemical biosensing

Timely identification of cancers is pivotal in optimizing treatment efficacy and reducing their widespread impact. This study introduces a novel biosensor for the sensitive electrochemical detection of cancer cells overexpressing mucin 1 (MUC1), a well-established model for breast cancer. The sensor substrate comprises gold columnar nanostructures obtained through glancing angle deposition (GLAD) of copper nanostructures, subsequently replaced by gold via a facile galvanic replacement process. Functionalizing these gold nanostructures with aptamers targeting the MUC1 glycoproteins, a prominent cancer biomarker, enables specific recognition of MCF-7 breast cancer cells. The proposed electrochemical sensing platform offers several advantages, including high selectivity, a wide linear range of detection, a low detection limit of 30 cells per mL, and long-term stability, rendering this sensor highly desirable for definitive breast cancer diagnosis.

A dual-mode biosensor based on silica inverse opal photonic crystals modulated electrochemiluminescence and dye displacement colorimetry for the sensitive detection of synthetic cathinone in water environment

To address the challenges posed by signal capacity limitations and the reliance of sensing methods on single analytical information, this study developed an electrochemiluminescence (ECL) and colorimetric dual-mode sensing platform for the precise detection of 4-chloroethcathinone (4-CEC) in water environments. Firstly, the accurate alignment of the reflection wavelength of appropriately sized silica inverse opal photonic crystals (SIOPCs) with the ECL emission wavelength of luminescent metal-organic frameworks (PCN-224) has been achieved via diameter modulation. This innovative design, which cleverly utilized the band-edge effect, improved the luminous intensity of the ECL sensor, leading to a significant boost in analytical performance. Secondly, the establishment of a colorimetric detection method for confirming the presence of 4-CEC in samples through visual observation of color changes was achieved by employing an aptamer-based dye displacement reaction, utilizing differential binding affinities between the aptamer and both the sulforhodamine B (SRB) and 4-CEC. Under the optimal experimental conditions, the dual-mode sensor demonstrated ECL detection of limits (LOD) of 2.6 × 10-13 g/L and colorimetric LOD of 6.5 ng/L for 4-CEC. These findings highlighted the tremendous potential of developing streamlined and efficient dual-signal readout platforms using ECL aptamer sensors for the precise determination of other Synthetic cathinones (SCs) in water environments.

A novel fluorescence-electrochemiluminescence dual-mode sensing platform for high-precision BRAF gene detection

In this study, we innovatively synthesized bipyridine ruthenium cluster nanosheets (RuMOFNCs), a novel metal-organic framework material that exhibits both fluorescence and electrochemiluminescence. Gold nanoparticles (AuNPs) were anchored onto RuMOFNCs via bipyridine chelation, enhancing optical signals and creating sites for attaching biologically functional probes. We employed tetraferrocene-modified DNA probes, linked via gold-sulfur (Au-S) bonds, to construct a dual-mode fluorescence-electrochemiluminescence biosensor. This sensor, exploiting exonuclease III (Exo III)-mediated cyclic amplification, inhibits the electron transfer from RuMOFNC to tetraferrocene, resulting in amplified fluorescence and electrochemiluminescence signals. The sensor demonstrates exceptional sensitivity for detecting the BRAF gene, with fluorescence and electrochemiluminescence detection limits of 10.3 aM (range: 0.1 fM to 1 nM) and 3.1 aM (range: 1 aM to 10 pM), respectively. These capabilities are attributed to RuMOFNCs' luminescence properties, tetraferrocene's quenching effect, and the specificity of base pairing. This study's findings hold substantial promise for biomedical research and clinical diagnostics, particularly in precision medicine and early disease detection.

Europium Metal-Organic Framework with a Tetraphenylethylene-Based Ligand: A Dual-Mechanism Quenching Immunosensor for Enhanced Electrochemiluminescence via the Coordination Trigger

The effective applications of electrochemiluminescence (ECL) across various fields necessitate ongoing research into novel luminophores and ECL strategies. In this study, self-luminous flower-like nanocomposites (Eu-tcbpe-MOF) were prepared by coordination self-assembly using the aggregation-induced emission material 1,1,2,2-tetrakis(4-carboxyphenyl)ethylene (H4TCBPE) and Eu(III) ions as the precursors. Compared with the monomers and aggregates of H4TCBPE, Eu-tcbpe-MOF exhibits stronger ECL emission. Such enhanced electrochemiluminescence is due to coordination as the coordination-triggered electrochemiluminescence (CT-ECL) enhancement effect. In this study, a cubic-structured nanocomposite (Co9S8@Au@MoS2) was used as an efficient quencher, and a more sensitive ECL detection platform was achieved by two quenching mechanisms: resonance energy transfer and competitive consumption of coreactants. N,N-Diethylethanolamine (DBAE) was used as a coreactant, and DBAE has a faster electron transfer rate and stronger energy supply efficiency than the traditional anodoluminescent coreactant tripropylamine, which effectively improves the ECL signal intensity of Eu-tcbpe-MOF. Hence, a sandwich-type ECL immunosensor was prepared by employing a dual-quenching mechanism, utilizing Eu-tcbpe-MOF as the detection probe and Co9S8@Au@MoS2 as the quencher, achieving precise detection of carcinoembryonic antigen from 0.1 pg·mL-1 to 100 ng·mL-1 with a detection limit of 35.1 fg·mL-1.

A Controlled Release Aptasensor Utilizing AIE-Active MOFs as High-Efficiency ECL Nanoprobe for the Sensitive Detection of Adenosine Triphosphate

Improving the sensitivity in electrochemiluminescence (ECL) detection systems necessitates the integration of robust ECL luminophores and efficient signal transduction. In this study, we report a novel ECL nanoprobe (Zr-MOF) that exhibits strong and stable emission by incorporating aggregation-induced emission ligands into Zr-based metal-organic frameworks (MOFs). Meanwhile, we designed a high-performance signal modulator through the implementation of a well-designed controlled release system with a self-on/off function. ZnS quantum dots (QDs) encapsulated within the cavities of aminated mesoporous silica nanoparticles (NH2-SiO2) serve as the ECL quenchers, while adenosine triphosphate (ATP) aptamers adsorbed on the surface of NH2-SiO2 through electrostatic interaction act as "gatekeepers." Based on the target-triggered ECL resonance energy transfer between Zr-MOF and ZnS QDs, we establish a coreactant-free ECL aptasensor for the sensitive detection of ATP, achieving an impressive low detection limit of 0.033 nM. This study not only demonstrates the successful combination of ECL with controlled release strategies but also opens new avenues for developing highly efficient MOFs-based ECL systems.

Aggregation-Induced Enhanced Electrochemiluminescence from Tris(bipyridine)ruthenium(II) Derivative Nanosheets for the Ultrasensitive Detection of Human Telomerase RNA

The traditional tris(bipyridine)ruthenium(II) complex suffers from the notorious aggregation-caused quenching effect, which greatly compromises its electrochemiluminescence (ECL) efficiency, thus hindering further applications in biosensing and clinical diagnosis. Here, the ultrathin tetraphenylethylene-active tris(bipyridine)ruthenium(II) derivative nanosheets (abbreviated as Ru-TPE NSs) are synthesized through a protein-assisted self-assembly strategy for ultrasensitive ECL detection of human telomerase RNA (hTR) for the first time. The synthesized Ru-TPE NSs exhibit the aggregation-induced enhanced ECL behavior and excellent water-dispersion. Surprisingly, up to a 106.5-fold increase in the ECL efficiency of Ru-TPE NSs is demonstrated compared with the dispersed molecules in an organic solution. The restriction of intramolecular motions is confirmed to be responsible for the significant ECL enhancement. Therefore, this proposed ECL biosensor shows high sensitivity and excellent selectivity for hTR based on Ru-TPE NSs as efficient ECL beacons and the catalytic hairpin assembly as signal amplification, whose detection limit is as low as 8.0 fm, which is far superior to the previously reported works. Here, a promising analytical method is provided for early clinical diagnosis and a new type of efficient ECL emitters with great application prospects is represented.

Aggregation-induced enhancement of pyrene-based metal-organic framework as a new electrochemiluminescence emitter for ultrasensitive detection of sulfadimethoxine

In this study, a signal-on electrochemiluminescence (ECL) aptasensor for ultrasensitive detection of sulfadimethoxine (SDM) was constructed based on a competitive aptamer strategy. Specifically, cerium-metal-organic framework (Ce-MOF) with large specific surface area and excellent electrical conductivity was combined with gold nanoparticles (AuNPs) to form a substrate, followed by the immobilisation of double-stranded DNA (dsDNA) via AuN bonds. In the presence of SDM, the aptamer tended to form an aptamer-SDM complex, which caused dsDNA to dissociate. After release of the aptamer, the capture probe (CP) combined with the tracer label to enhance the ECL signal. As expected, the prepared sensor displayed an ideal linear response range from 10.0 fg mL-1 to 100 ng mL-1 with a limit of detection (LOD) of 1.28 fg mL-1 and successfully detected SDM in milk and quality control samples.

Single-atom iron boosts electrochemiluminescence for ultrasensitive carcinoembryonic antigen detection

A simple and ultrasensitive sandwich-type electrochemiluminescence (ECL) immunosensor has been developed using porous three-dimensional gold nanoparticles (Au NPs) iron(Fe)-zinc(Zn) metal-organic frameworks (Au NPs-FeZn-MOFs@luminol) as high-efficiency ECL signal probes with Fe single-atom catalysts (SACs) (Fe-N-C SACs) as potentially advanced coreaction accelerators and dissolved oxygen as a coreaction agent to realize an H2O2-free amplification method for detecting carcinoembryonic antigen (CEA). The cathodic ECL of luminol, which was usually negligible, increased first. Because the Fe-N-C SACs exhibited an outstanding catalytic performance and a unique electronic structure, different reactive oxygen species (ROS) were generated via the oxygen reduction reaction. ROS oxidized the luminol anions to luminol anion radicals, preventing the time-consuming luminol electrochemical oxidation. Furthermore, the luminol anion radicals generated in situ reacted with ROS to produce potent cathodic ECL emissions. The immunosensor exhibited favorable analytical accuracy (detection range: 0.1 pg mL-1 - 80 ng mL-1), and its detection limit for serum samples was 0.031 pg mL-1 (S/N = 3). Consequently, the proposed strategy offers a new approach for early screening of CEA.

Bifunctional TiO2 Nanoflower-Induced H4TCBPE Aggregation Enhanced Electrochemiluminescence for an Ultrasensitive Assay of Organophosphorus

In this work, the aggregation-induced emission ligand 1,1,2,2-tetra(4-carboxylbiphenyl)ethylene (H4TCBPE) was rigidified in the Ti-O network to form novel electrochemiluminescence (ECL) emitter H4TCBPE-TiO2 nanospheres, which acted as an effective ECL emitter to construct an "on-off" ECL biosensor for ultrasensitive detection of malathion (Mal). H4TCBPE-TiO2 exhibited excellent ECL responses due to the Ti-O network that can restrict the intramolecular free motions within H4TCBPE and then reduce the nonradiative relaxation. Moreover, TiO2 can act as an ECL co-reaction accelerator to promote the generation of sulfate radical anion (SO4•-), which interacts with H4TCBPE in the Ti-O network to produce enhanced ECL response. In the presence of Mal, numerous ligated probes (probe 1 to probe 2, P1-P2) were formed and released by copper-free click nucleic acid ligation reaction, which then hybridized with hairpin probe 1 (H1)-modified H4TCBPE-TiO2-based electrode surface. The P1-P2 probes can initiate the target-assisted terminal deoxynucleoside transferase (TdTase) extended reaction to produce long tails of deoxyadenine with abundant biotin, which can load numerous streptavidin-functionalized ferrocenedicarboxylic acid polymer (SA-PFc), causing quenching of the ECL signal. Thus, the ultrasensitive ECL biosensor based on H4TCBPE-TiO2 ECL emitter and click chemistry-actuated TdTase amplification strategy presents a desirable range from 0.001 to 100 ng/mL and a detection limit low to 9.9 fg/mL. Overall, this work has paved an avenue for the development of novel ECL emitters, which has opened up new prospects for ECL biosensing.

Photocontrollable DNA Walker-Based Molecular Circuit for the Tunable Detection of MicroRNA-21 Using Metal-Organic Frameworks as Label-Free Fluorescence Tags

Tunable detection of microRNA is crucial to meet the desired demand for sample species with varying concentrations in clinical settings. Herein, we present a DNA walker-based molecular circuit for the detection of miRNA-21 (miR-21) with tunable dynamic ranges and sensitivity levels ranging from fM to pM. The phosphate-activated fluorescence of UiO-66-NH2 metal-organic framework nanoparticles was used as label-free fluorescence tags due to their competitive coordination effect with the Zr atom, which significantly inhibited the ligand-to-metal charge transfer. To achieve a tunable detection performance for miR-21, the ultraviolet sensitive o-nitrobenzyl was induced as a photocleavable linker, which was inserted at various sites between the loop and the stem of the hairpin probe to regulate the DNA strand displacement reaction. The dynamic range can be precisely regulated from 700- to 67,000-fold with tunable limits of detection ranging from 2.5 fM to 36.7 pM. Impressively, a Boolean logic tree and complex molecular circuit were constructed for logic computation and cancer diagnosis in clinical blood samples. This intelligent biosensing method presents a powerful solution for converting complex biosensing systems into actionable healthcare decisions and will facilitate early disease diagnosis.

Precise Modulation of Intramolecular Aggregation-induced Electrochemiluminescence by Tetraphenylethylene-based Supramolecular Architectures

The precisely modulated synthesis of programmable light-emitting materials remains a challenge. To address this challenge, we construct four tetraphenylethylene-based supramolecular architectures (SA, SB, SC, and SD), revealing that they exhibit higher electrochemiluminescence (ECL) intensities and efficiencies than the tetraphenylethylene monomer and can be classified as highly efficient and precisely modulated intramolecular aggregation-induced electrochemiluminescence (PI-AIECL) systems. The best-performing system (SD) shows a high ECL cathodic efficiency exceeding that of the benchmark tris(2,2'-bipyridyl)ruthenium(II) chloride in aqueous solution by nearly six-fold. The electrochemical characterization of these architectures in an organic solvent provides deeper mechanistic insights, revealing that SD features the lowest electrochemical band gap. Density functional theory calculations indicate that the band gap of the guest ligand in the SD structure is the smallest and most closely matched to that of the host scaffold. Finally, the SD system is used to realize ECL-based cysteine detection (detection limit=14.4 nM) in real samples. Thus, this study not only provides a precisely modulated supramolecular strategy allowing chromophores to be controllably regulated on a molecular scale, but also inspires the programmable synthesis of high-performance aggregation-induced electrochemiluminescence emitters.

Engineering Molecular Emission Centers of Carbon Dots to Boost the Electrochemiluminescence for the Detection of Cancer Cells

Despite the fact that electrochemiluminescent (ECL) performance of carbon dots (CDs) could be improved by modulating their surface defects, they are still restricted by inferior controllability and poor reproducibility. In this work, we disclosed a new approach for synthesizing luminescent groups rich in CDs (Lu-CDs) by engineering the luminol as molecular emission centers into the CDs, which exhibited an 80-fold stronger ECL intensity at an ECL onset potential of 0.6 V than the CDs without pre-implanted luminol. Different from the significant deviation between the ECL and fluorescence emission of other surface state-dominated CDs, the ECL emission of Lu-CDs was nearly consistent with its fluorescence emission at 465 nm, which was defined as the molecular emission dominated-ECL CDs herein. To prove this principle, the Lu-CDs were employed to construct an ECL biosensor for MCF-7 cell analysis based on the cell direct recognition and amplification strategy, which made the MCF-7 cells as nanomachines via specific binding with aptamer signal probes on the DNA triangular scaffold. The proposed biosensor displayed a wide detection range from 101 to 104 cell mL-1 and a low detection limit of 8.91 cells mL-1. Overall, this work not only presents a new strategy for preparing CDs with high controllability and excellent reproducibility but also provides a platform for tumor cell sensing.

Signal "On-Amplified-Off" Strategy Based on Hafnium Dioxide Nanomaterials as Electrochemiluminescence Emitters for Progesterone Detection

When consumed, excess progesterone (P4)─found in food and the environment─can lead to severe illnesses in humans. Therefore, quantitative analysis of P4 is critical for identifying its hazardous levels. In this study, a novel signal "on-amplified-off" P4 detection mode was proposed, which was based on the utilization of hafnium oxide (HfO2) as a unique electrochemiluminescence (ECL) emitter, produced by calcining UiO-66(Hf). This is the first time that HfO2 has been used as an ECL emitter. HfO2 displayed excellent conductivity and a high specific surface area, allowing it to connect with numerous aptamers and produce a "signal-on" effect. Ni-doped ZnO (Ni-ZnO) acted as a coreaction accelerator, enhancing the ECL strength of HfO2 by generating more tripropylamine radicals. cDNA was labeled with Ni-ZnO, and Ni-ZnO was linked to the aptamer via base complementary pairing, affording "signal-amplified". The presence of the target molecule P4 instigated a specific binding process with the aptamer, triggering the shedding of cDNA-Ni-ZnO and resulting in "signal-off". This novel "on-amplified-off" strategy effectively improved the sensitivity and specificity of P4 analysis, introducing a practical method for detecting biomolecules beyond the scope of this study, which holds immense potential for future applications.

Intramolecular Enhancement of a Zirconium-Based Metal-Organic Framework for Coordination-Induced Electrochemiluminescence Bleomycin Analysis

It is significantly vital to develop a convenient assay method in clinical treatment due to an atypically low abundance (∼5 μM) of bleomycin (BLM) used in clinics. Herein, an electrochemiluminescence (ECL) biosensor using a zirconium-based metal-organic frameworks (Zr-MOFs) as an intramolecular coordination-induced electrochemiluminescence (CIECL) emitter was proposed for sensitive detection of BLM. Zr-MOFs were synthesized using Zr(IV) as metal ions and 4,4',4″-nitrilotribenzoic acid (H₃NTB) as ligands for the first time. The H₃NTB ligand not only acts as coordination units bonding with Zr(IV) but functions as a coreactant to enhance ECL efficiency rooted in its tertiary nitrogen atoms. Specifically, a long guanine-rich (G-rich) single-stranded DNA (ssDNA) was released by the target-BLM-controlled DNA machine that could perform π-π stacking with another G-quadruplex, ssDNA-rhodamine B (S-RB), by shearing DNA's fixed sites 5'-GC-3' and the auxiliary role of exonuclease III (Exo III). Finally, due to the quenching effect of rhodamine B, a negative correlation trend was obtained between ECL intensity and BLM concentration in the range from 5.0 nM to 50 μM and the limit of detection was 0.50 nM. We believe that it is a promising approach to guide the preparation of CIECL-based functional materials and establishment of analytical methods.

Ruthenium(II) complex-grafted conductive metal-organic frameworks with conductivity- and confinement-enhanced electrochemiluminescence for ultrasensitive biosensing application

Improving the electrochemiluminescence (ECL) performance of luminophores is an ongoing research hotspot in the ECL realm. Herein, a high-performance metal-organic framework (MOF)-based ECL material (Ru@Ni₃(HITP)₂, HITP = 2,3,6,7,10,11-hexaiminotriphenylene) with conductivity- and confinement-enhanced ECL was successfully constructed by using conductive MOF Ni₃(HITP)₂ as the carrier to graft Ru(bpydc)₃^4- (H₂bpydc = 2,2'-bipyridine-4,4'-dicarboxylic acid) into the channels of Ni₃(HITP)₂. Compared to Ru@Cu₃(HITP)₂ and Ru@Co₃(HITP)₂ with relatively low conductivity, the ECL intensity of Ru@Ni₃(HITP)₂ was prominently increased about 6.76 times and 18.8 times, respectively, which demonstrated that the increase in conductivity induced the ECL enhancement of the MOF-based ECL materials. What's more, the hydrophobic and porous Ni₃(HITP)₂ can not only effectively enrich the lipophilic tripropylamine (TPrA) coreactants in its channels to enhance the electrochemical oxidation efficiency of TPrA, but also provide a conductive reaction micro-environment to boost the ECL reaction between Ru(bpydc)₃^3- intermediates and TPrA^• in confined spaces, thus realizing a remarkable confinement-enhanced ECL. Considering the excellent ECL performance of Ru@Ni₃(HITP)₂, an ultrasensitive ECL biosensor was prepared based on the Ru@Ni₃(HITP)₂ ECL indicator combining an exonuclease I-aided target cycling amplification strategy for thrombin determination. The constructed ECL biosensor showcased a wide linear range from 1 fM to 1 nM with a low detection limit of 0.62 fM. Overall, the conductivity- and confinement-enhanced ECL based on Ru@Ni₃(HITP)₂ provided effective and feasible strategies to enhance ECL performance, which paved a promising avenue for exploring high-efficient MOF-based ECL materials and thus broadened the application scope of conductive MOFs.

Electrochemical aptasensor based on the engineered core-shell MOF nanostructures for the detection of tumor antigens

It is essential to develop ultrasensitive biosensors for cancer detection and treatment monitoring. In the development of sensing platforms, metal-organic frameworks (MOFs) have received considerable attention as potential porous crystalline nanostructures. Core-shell MOF nanoparticles (NPs) have shown different diversities, complexities, and biological functionalities, as well as significant electrochemical (EC) properties and potential bio-affinity to aptamers. As a result, the developed core-shell MOF-based aptasensors serve as highly sensitive platforms for sensing cancer biomarkers with an extremely low limit of detection (LOD). This paper aimed to provide an overview of different strategies for improving selectivity, sensitivity, and signal strength of MOF nanostructures. Then, aptamers and aptamers-modified core-shell MOFs were reviewed to address their functionalization and application in biosensing platforms. Additionally, the application of core-shell MOF-assisted EC aptasensors for detection of several tumor antigens such as prostate-specific antigen (PSA), carbohydrate antigen 15-3 (CA15-3), carcinoembryonic antigen (CEA), human epidermal growth factor receptor-2 (HER2), cancer antigen 125 (CA-125), cytokeratin 19 fragment (CYFRA21-1), and other tumor markers were discussed. In conclusion, the present article reviews the advancement of potential biosensing platforms toward the detection of specific cancer biomarkers through the development of core-shell MOFs-based EC aptasensors.

Dual-binding domain electrochemiluminescence biosensing platform with self-checking function for sensitive detection of synthetic cathinone in e-cigarettes

Current single signal electrochemiluminescence (ECL) sensors are susceptible to false positive or false negative phenomena due to experimental conditions. Therefore, sensors with "self-checking" function are attracting democratic attention. In quick succession, a highly sensitive single-cathode dual ECL signal aptasensor with self-checking function to improve the shortcomings mentioned above was designed. This aptasensor used In-based metal-organic framework (MIL-68) as load and stabilizer to effectively attenuate the aggregation-induced quenching (ACQ) effect of porphyrin derivatives (Sn-TCPP) while improve ECL stability. The introduction of cooperative-binding split-aptamers" (CBSAs) aptamers increased the specificity of the aptasensor and its unique double-binding domains detection accelerated the detection efficiency. When analyzing 3,4-methylenedioxypyrovalerone (MDPV), we could calculate two concentrations based on the strength of ECL 1 and ECL 2. If the concentrations are the same, the result would be obtained; if not, it should be retested. Depending on the above operation, the results achieve self-check. It was found that the designed aptasensor could quantify the concentration of MDPV between 1.0 × 10^-12 g/L and 1.0 × 10^-6 g/L with the limit of detection (LOD) of 1.4 × 10^-13 g/L and 2.0 × 10^-13 g/L, respectively (3 σ/slope). This study not only improves the detection technology of MDPV, but also explores the dual-signal detection of porphyrin for the first time and enriches the definition of self-checking sensor.

A resonant energy transfer electrochemiluminescence immunosensor based on low trigger potential of Zn-metal organic framework and CoOOH nanosheets for 5-fluorouracil detection

The organic luminophores have inspired widespread interest in electrochemiluminescence (ECL). Herein, a novel rod-like metal-organic framework was formed by chelating Zn ion with 9,10-di(p-carboxyphenyl)-anthracene (DPA), defined as Zn-MOF for simplicity. In this proposal, the prepared Zn-MOF was first used as a powerful organic luminophore with low trigger potential, thus developing a competitive ECL immunoassay for ultrasensitive detection of 5-fluorouracil (5-FU) with 1,4-diazabicyclo[2.2.2]octane (D-H₂) as the coreactant. The absorption spectrum of cobalt oxyhydroxide (CoOOH) nanosheets and the ECL emission spectrum of Zn-MOF could be highly matched, which ensured the occurrence of resonance energy transfer (RET). For that, ECL-RET was applied in the assembly strategy of the ECL biosensor, and Zn-MOF was used as the energy donor and CoOOH nanosheets as the acceptor. Taking advantage of the luminophore and ECL-RET, the immunoassay can be used for ultra-sensitive quantitative detection of 5-fluorouracil. The proposed ECL-RET immunosensor showed satisfactory sensitivity and accuracy with a wider linear range from 0.001 to 1000 ng/mL, and a lower detection limit (0.52 pg/mL). Hence, it is worth believing that this strategy can pave a bright research direction for the detection of 5-FU or other biological small molecules.

Aggregation-Induced Electrochemiluminescence and Nitric Oxide Recognition by Halogen Bonding with a Ruthenium(II) Complex

In this study, a new strategy for NO detection based on the aggregation-induced electrochemical luminescence (AIECL) of a ruthenium-based complex and the halogen bonding effect was developed. First, [Ru(phen)₂ (phen-Br₂ )]²⁺ (phen : 1,10-phenanthroline, phen-Br₂  : 3,8-dibromo-1,10-phenanthroline) was synthesized and exhibited aggregation-induced emission (AIE) and AIECL properties in a poor solvent (H₂ O). [Ru(phen)₂ (phen-Br₂ )]²⁺ exhibited greatly enhanced AIECL properties compared to its AIE intensity. When the volume fraction of water (f_w , v %) in the H₂ O-acetonitrile (MeCN) system was increased from 30 to 90 %, the photoluminescence and electrochemiluminescence (ECL) intensities were three- and 800-fold that of the pure MeCN system, respectively. Dynamic light scattering and scanning electron microscopy results indicated that [Ru(phen)₂ (phen-Br₂ )]²⁺ aggregated into nanoparticles. AIECL is sensitive to NO because of its halogen bonding effect. The C-Br⋅⋅⋅N bond between [Ru(phen)₂ (phen-Br₂ )]²⁺ and NO increased the distance of complex molecules, resulting in ECL quenching. A detection limit of 2 nM was obtained with 5 orders of magnitude linear range. The combination of the AIECL system and the halogen bond effect expands the theoretical research and applications in biomolecular detection, molecular sensors, and stages of medical diagnosis.

Electrochemiluminescence nanoemitters for immunoassay of protein biomarkers

The family of electrochemiluminescent luminophores has witnessed quick development since the electrochemiluminescence (ECL) phenomenon of silicon nanoparticles was first reported in 2002. Moreover, these developed ECL nanoemitters have extensively been applied in sensitive detection of protein biomarker by combining with immunological recognition. This review firstly summarized the origin and development of various ECL nanoemitters including inorganic and organic nanomaterials, with an emphasis on metal-organic frameworks (MOFs)-based ECL nanoemitters. Several effective strategies to amplify the ECL response of nanoemitters and improve the sensitivity of immunosensing were discussed. The application of ECL nanoemitters in immunoassay of protein biomarkers for diagnosis of cancers and other diseases, especially lung cancer and heart diseases, was comprehensively presented. The recent development of ECL imaging with the nanoemitters as ECL tags for detection of multiplex protein biomarkers on single cell membrane also attracted attention. Finally, the future opportunities and challenges in the ECL biosensing field were highlighted.

High-Performance Electrochemiluminescence of a Coordination-Driven J-Aggregate K-PTC MOF Regulated by Metal-Phenolic Nanoparticles for Biomarker Analysis

The elimination of aggregation-caused quenching of polycyclic aromatic hydrocarbons by metal-ligand coordination is of immense scientific interest in solid-state electrochemiluminescence (ECL) sensing. Herein potassium ion (K⁺)-mediated J-aggregate K-PTC MOF (PTCA, perylene-3,4,9,10-tetracarboxylic) was synthesized and employed to formulate an ECL immunosensor for biomarker detection. The coordination-driven aggregates are arranged in an end-to-end side mode, which overcomes the aggregation-caused quenching related to PTCA concentration. Compared with PTCA, K-PTC MOF shows a more stable ECL emission with an unprecedented red shift to 718 nm and is equipped with ECL activity for analytical applications at a voltage of -1.1 V. Considering the requirements of accurate detection, metal-phenolic bioactive nanoparticles (MPNPs) were synthesized for the construction of a sandwich sensing platform to realize the steady-state regulation of ECL. As proof of applicability, a constructive experiment was carried out with neuron-specific enolase (NSE), a marker of small cell lung cancer (SCLC), as a targeted analyte. With optimal requirements, the configuration can provide a detection range of 10 pg/mL to 50 ng/mL and a detection limit of 7.4 pg/mL, accompanied by sufficient practical analytical performance. Collectively, this paradigm provides a deeper understanding of the ECL characteristics of coordination-driven J-aggregation and provides more possibilities for the development of ECL patterns based on luminescent metal-organic frameworks.

Electrochemically Controlled Atom Transfer Radical Polymerization for Electrochemical Aptasensing of Tumor Biomarkers

Tumor biomarkers are of great value in the liquid biopsy of malignant tumors. In this work, a simple and cost-friendly electrochemical aptasensor was presented for the highly sensitive and selective detection of glycoprotein tumor biomarkers. The DNA aptamer-modified electrode was used as the sensing interface to specifically capture the target glycoprotein tumor biomarkers, to which the alkyl halide initiators for atom transfer radical polymerization (ATRP) were then attached via the esterification crosslinking between the boronic acid group and the cis-dihydroxyl sites of the conjugated oligosaccharide chains on glycoprotein tumor biomarkers followed by the growth of long-chain polymers through electrochemically controlled ATRP (eATRP) to efficiently recruit the ferrocene detection tags. As there are tens to hundreds of cis-dihydroxyl sites on a glycoprotein tumor biomarker for attaching ATRP initiators while each long-chain polymer can recruit hundreds to thousands of ferrocene detection tags, a significantly high current signal can be generated even in the presence of ultralow-abundance targets. Hence, the eATRP-based electrochemical aptasensor is capable of sensitively and selectively detecting glycoprotein tumor biomarkers. Using alpha-fetoprotein as the model target, the limit of detection was demonstrated to be 0.32 pg/mL. Moreover, the aptasensor has been successfully applied to detect glycoprotein tumor biomarkers in human serum samples. In view of its high sensitivity and selectivity, simple operation, and cost-friendliness, the eATRP-based electrochemical aptasensor shows great promise in the glycoprotein-based liquid biopsy of malignant tumors, even at the early stage of development.

Ordered heterogeneity in dual-ligand MOF to enable high electrochemiluminescence efficiency for bioassay with DNA triangular prism as signal switch

Herein, the microRNA-141 electrochemiluminescence (ECL) bioassay was developed using the dual-ligand metal-organic framework (d-MOF) with ordered heterogeneity, which simultaneously contained the luminophore ligands (1,1,2,2-tetra(4-carboxylbiphenyl)ethylene, denoted as TCBPE) and the coreactant ligands (1,4-diazabicyclo[2.2.2]octane, denoted as DN₂H₂). The resultant d-MOF revealed significantly enhanced ECL intensity without any exogenous coreactants, which was 3.53 times higher in comparison with that of single-ligand MOF (only TCBPE as ligands) even with the addition of exogenous DN₂H₂. Thanks to the ordered heterogeneity in d-MOF, the intramolecular rotation of TCBPE was restricted via oriented coordination and the spatial location of DN₂H₂ was reasonably arranged due to the framework structure, which could not only enhance the excitation efficiency but also improve the electron-transfer efficiency based on the synergistic enhancement effect between structures and compositions in micro/nano confined space. Based on this, the proposed biosensor employed a novel DNA triangular prism (DNA TP) as signal switch to detect microRNA-141, achieving the low detection limit at the level of 22.9 aM and a broad linear ranging from 100 aM to 100 pM. The precise design of the ordered d-MOFs by co-assembling the luminophore and coreactant ligands holds a promise strategy to achieve ECL MOFs and construct the ECL biosensors in diagnostic analysis.

Mixed-Ligand-Regulated Self-Enhanced Luminous Eu-MOF as an ECL Signal Probe for an Oriented Antibody-Decorated Biosensing Platform

The self-luminescence behavior of lanthanide MOFs (Ln-MOFs) due to the unique antenna effect is considered to be a promising electrochemiluminescence (ECL) emission for biosensors. It is more challenging for Ln-MOFs on account of the difficulty to stimulate Ln ions with the desired energy-transfer efficiency to produce stronger ECL emissions at a low potential. Here, guided by a second ligand-assisted energy-transfer strategy, we present an efficient self-enhanced luminescence mixed-ligand Eu-MOF as an ECL signal probe for an oriented antibody-decorated biosensing platform with a low detection limit and a broad detection range. Diamino terephthalic acid (NH₂-H₂BDC) and 1,10-phenanthroline (Phen) were selected as the first and second ligands, respectively, to form highly conjugated structures, as well as suppress the nonradiative energy transfer. Impressively, Phen precisely adjusts the energy gap between the triplet ligand and the excited state of Eu³⁺, realizing the self-enhancement of ECL efficiency of the Eu-MOF. The mixed ligand adjusted the molar ratio to obtain the stable and strong ECL signal at a lowered triggering potential (0.83 V). In addition, FeCo@CNT features densely active FeCo sites along with a rich hierarchy conductive carbon nanotube (CNT) network, which is efficiently a co-reaction accelerator to produce more TPA^•+ radicals to accelerate the reduction process of the Eu-MOF for achieving the ECL emission amplification. FeCo@CNT with heptapeptide HWRGWVC (HWR) constructed a matrix biosensing interface that allowed the fragment antigen-binding (Fab) regions to target specific antigens and enhance the incubation efficiency. The present study has gone some way toward designing a self-enhanced luminous Eu-MOF, thus giving new fresh impetus to develop high-performance ECL emitters for biological analysis.

Oxygen Free Radical Scavenger PtPd@PDA as a Dual-Mode Quencher of Electrochemiluminescence Immunosensor for the Detection of AFB1

Here, a dual-mode quenched electrochemiluminescence (ECL) immunosensor based on PtPd@PDA was proposed. Among them, nitrogen-doped hydrazide conjugated carbon dots (NHCDs), as an ECL emitter and a donor of resonance energy transfer, were quenched by PtPd@PDA (receptor). At the same time, PDA in PtPd@PDA, as an oxygen radical scavenger, completed the further quenching of the ECL signal by consuming O₂^•- generated by the decomposition of co-reactant H₂O₂. The dual-mode quenching from the above two channels was achieved. In addition, compared with the traditional carbon quantum dots, NHCDs as ECL emitters had lower excitation potential. Moreover, a large number of amino groups provided by aminated MWCNTs could capture more antibodies while connecting with NHCDs. Under the optimum experimental conditions, taking aflatoxin B1 as the target, the proposed sensor with good specificity, stability, and reproducibility had good linearity when the concentration of AFB1 was 0.01-100 ng/mL, with the detection limit of 2.63 pg/mL (S/N = 3). This strategy provided more possibilities for the application of dopamine metal nanocomposites in electrochemiluminescence analysis and offered a new approach to detect AFB1.

Boron Carbon Nitride Nanosheets-Ru Nanocomposite Self-Enhancement Electrochemiluminescence Emitter with a Three-Dimensional DNA Network Structure as a Signal Amplifier for Ultrasensitive Detection of TK1 mRNA

In this study, a neoteric self-enhanced nanocomposite boron carbon nitride nanosheets (BCN NSs)-Ru obtained by chemical crosslinking between boron carbon nitride nanosheets (BCN NSs) and tris (4,4'-dicarboxylicacid-2,2'-bipyridyl) ruthenium(II) dichloride (Ru(dcbpy)₃Cl₂) was used as an emitter to build an electrochemiluminescence (ECL) biosensor for ultrasensitive detection of the cancer marker human thymidine kinase 1 (TK1) mRNA. Importantly, the self-enhanced BCN NSs-Ru could exhibit strong ECL emission because boron radicals and amine groups derived from BCN NSs could significantly enhance the ECL response of Ru(dcbpy)₃Cl₂, which avoided the defects of the long electron transfer path and large energy loss between the emitter and coreactant in the traditional coreaction ECL system. Impressively, in the presence of target TK1 mRNA, three-dimensional DNA network structure-labeled numerous ferrocene probes could be assembled to quickly quench the ECL signal of BCN NSs-Ru, resulting in improved biosensor sensitivity. The obtained "on-off" biosensor showed excellent stability and high sensitivity with a detection limit of 32.3 aM. In general, the developed strategy provided a new biosensing way for ultrasensitive detection of biomolecules in early disease diagnosis.

Progress and Prospects of Electrochemiluminescence Biosensors Based on Porous Nanomaterials

Porous nanomaterials have attracted much attention in the field of electrochemiluminescence (ECL) analysis research because of their large specific surface area, high porosity, possession of multiple functional groups, and ease of modification. Porous nanomaterials can not only serve as good carriers for loading ECL luminophores to prepare nanomaterials with excellent luminescence properties, but they also have a good electrical conductivity to facilitate charge transfer and substance exchange between electrode surfaces and solutions. In particular, some porous nanomaterials with special functional groups or centered on metals even possess excellent catalytic properties that can enhance the ECL response of the system. ECL composites prepared based on porous nanomaterials have a wide range of applications in the field of ECL biosensors due to their extraordinary ECL response. In this paper, we reviewed recent research advances in various porous nanomaterials commonly used to fabricate ECL biosensors, such as ordered mesoporous silica (OMS), metal-organic frameworks (MOFs), covalent organic frameworks (COFs) and metal-polydopamine frameworks (MPFs). Their applications in the detection of heavy metal ions, small molecules, proteins and nucleic acids are also summarized. The challenges and prospects of constructing ECL biosensors based on porous nanomaterials are further discussed. We hope that this review will provide the reader with a comprehensive understanding of the development of porous nanomaterial-based ECL systems in analytical biosensors and materials science.

Electrochemiluminescent sensor based on an aggregation-induced emission probe for bioanalytical detection

In recent years, with the rapid development of electrochemiluminescence (ECL) sensors, more luminophores have been designed to achieve high-throughput and reliable analysis. Impressively, after the proposed fantastic concept of "aggregation-induced electrochemiluminescence (AIECL)" by Cola, the application of AIECL emitters provides more abundant choices for the further improvement of ECL sensors. In this review, we briefly report the phenomenon, principle and representative applications of aggregation-induced emission (AIE) and AIECL emitters. Moreover, it is noteworthy that the cases of AIECL sensors for bioanalytical detection are summarized in detail, from 2017 to now. Finally, inspired by the applications of AIECL emitters, relevant prospects and challenges for AIECL sensors are proposed, which is of great significance for exploring more advanced bioanalytical detection technology.

Tetraphenylethylene-Functionalized Metal-Organic Frameworks with Strong Aggregation-Induced Electrochemiluminescence for Ultrasensitive Analysis through a Multiple Convertible Resonance Energy Transfer System

Since aggregation-induced electrochemiluminescence (AIECL) combined the merits of aggregation-induced emission (AIE) and electrochemiluminescence (ECL), it has become a research hotspot recently. Herein, novel kinds of functional metal-organic frameworks (MOFs) with strong AIECL were reported through doping tetraphenylethylene (TPE) into UiO-66. Due to the porosity and highly ordered topological structure that caused the confinement effect of MOFs, the molecular motion of TPE was effectively limited within UiO-66, resulting in strong AIE. Meanwhile, the large specific surface area and porous structure of UiO-66 allowed TPE to react with coreactants more effectively, which was beneficial to ECL. Thus, the TPE-functionalized UiO-66 (TPE-UiO-66) showed excellent AIECL performance surprisingly. Inspired by this, a multiple convertible ECL resonance energy transfer (ECL-RET) system was constructed through a DNA Y structure that regulated the distance between the energy donor (TPE-UiO-66) and different energy acceptors (gold nanoparticles and Adriamycin). Furthermore, an ultrasensitive ECL biosensor for the detection of Mucin 1 (MUC1) was developed through the introduction of the novel ECL-RET system. In the presence of MUC1, the DNA Y structure was constructed, keeping the gold nanoparticles (AuNPs) away from TPE-UiO-66. Then, Adriamycin (Dox) could be embedded in the DNA Y structure and act as an energy acceptor to receive the energy of TPE-UiO-66, which made the biosensor produce a strong ECL response. As expected, the developed ECL biosensor exhibited superior detection performance for MUC1. This work provided a novel way to realize AIECL and board the application of AIECL in analytical chemistry.

Tetrahedral DNA Nanostructure with Multiple Target-Recognition Domains for Ultrasensitive Electrochemical Detection of Mucin 1

In this work, a tetrahedral DNA nanostructure (TDN) designed with multiple biomolecular recognition domains (m-TDN) was assembled to construct an ultrasensitive electrochemical biosensor for the quantitative detection of tumor-associated mucin 1 (MUC-1) protein. This new nanostructure not only effectively increased the capture efficiency of target proteins compared to the traditional TDN with a single recognition domain but also enhanced the sensitivity of the constructed electrochemical biosensors. Once the target MUC-1 was captured by the protein aptamers, the ferrocene-marked DNA strands as electrochemical signal probes at the vertices of m-TDN would be released away from the electrode surface, causing significant reduction of the electrochemical signal, thereby enhancing significantly the detection sensitivity. As a result, this well-designed biosensor achieved ultrasensitive detection of the biomolecule at a linear range from 1 fg mL^-1 to 1 ng mL^-1, with the limit of detection down to 0.31 fg mL^-1. This strategy provides a new approach to enhance the detection sensitivity for the diagnosis of diseases.

Highly Efficient Aggregation-Induced Enhanced Electrochemiluminescence of Cyanophenyl-Functionalized Tetraphenylethene and Its Application in Biothiols Analysis

Exploring new electrochemiluminescence (ECL) luminophores with high ECL efficiency and good stability in aqueous solution is in great demand for biological sensing. In this work, highly efficient aggregation-induced enhanced ECL of cyanophenyl-functionalized tetraphenylethene (tetra[4-(4-cyanophenyl)phenyl]ethene, TCPPE) and its application in biothiols analysis were reported. TCPPE contains four 4-cyanophenyl groups covalently attached to the tetraphenylethene (TPE) core, generating a nonplanar three-dimensional twisted conformation structure. TCPPE nanoparticles (NPs) with an average size of 15.84 nm were prepared by a precipitation method. High ECL efficiency (593%, CdS as standard) and stable ECL emission (over one month) were obtained for TCPPE NPs in aqueous solution. The unique properties of TCPPE NPs could be ascribed to the efficient suppression of nonradiative transition, the decrease of the energy gap, and the increase of anionic radical stability, which were proved by theoretical calculation and electrochemical and fluorescence methods. Contrasting aggregation-induced ECL chromic emission was first observed for TCPPE NPs. As a proof-of-methodology, an ECL method was developed for three biothiol assays with detection limits of 6, 7, and 300 nM for cysteine, homocysteine, and glutathione, respectively. This work demonstrates that TCPPE NPs are promising ECL luminophores, and the incorporation of appropriate substituents into luminophores can improve ECL efficiency and radical stability.

Vancomycin recognition and induced-aggregation of the Au nanoparticles through freeze-thaw for foodborne pathogen Staphylococcus aureus detection

Infectious diseases caused by foodborne pathogens have become a serious public health problem. It is urgent to develop simple, rapid, and visual methods for pathogen detection. Herein, gold nanoparticles (AuNPs), aptamer and vancomycin (Van) based dual-recognition molecules and magnetic enrichment were combined to realize visual detection of Staphylococcus aureus (S. aureus). Initially, S. aureus was bounded to aptamer coupled Fe₃O₄ with high affinity and selectivity, which can achieve the separation and enrichment of S. aureus in complex sample matrix. Subsequently, the second recognition molecule, Van, was conjugated to S. aureus -Apt - Fe₃O₄. Finally, the unbound Van supernatant was dropped in AuNPs solution that induced the aggregation of the AuNPs through freeze-thaw. Firstly, it was found that AuNPs were stable in the presence of Van after a freeze-thaw cycle. A facile visual colorimetric detection of S. aureus was constructed with the linear range from 10¹ to 10⁴ CFU/mL and the limit of detection (LOD) of 0.2 CFU/mL. By altering the aptamer, this method can be extended to the other Gram-positive bacteria. The proposed method has great potential applications in monitoring food contamination and infectious diseases.

Biocatalytic Metal-Organic Framework: Promising Materials for Biosensing

The high-efficient and specific catalysis of enzyme allow it to recognize a myriad of substrate that impels the biosensing. Nevertheless, the fragility of natural enzymes severely restricts their practical applications. Metal-organic frameworks (MOFs) with porous network and attractive functions have been intelligently employed as supports to encase enzymes for protecting them against hash environments. More importantly, the customizable construction and composition affords the intrinsic enzyme-like activity of some MOFs (known as nanozymes), which provides an alternative guideline to construct robust enzymes mimics. Herein, this review will introduce the concept of these biocatalytic MOFs, with the special emphasis on how the biocatalytic processes operated in these MOFs materials can reverse the plight of native enzymes-based biosensing. In addition, the present challenges and future outlooks in this research field are briefly put forward.

Three-fold interpenetrated metal–organic framework as a multifunctional fluorescent probe for detecting 2,4,6-trinitrophenol, levofloxacin, and l-cystine

A robust Zn(ii) MOF with good chemical and thermal stability, was prepared as an effective fluorescent probe for 2,4,6-trinitrophenol (TNP), levofloxacin (LVX) and l-cystine (l-Cys) with recyclability.