Development of Three-Dimensional Cell Culture Scaffolds Using Laminin Peptide-Conjugated Agarose Microgels

Designing Pathway-Controlled Multicomponent Ultrashort Peptide Hydrogels with Diverse Functionalities at the Nanoscale for Directing Cellular Behavior

Tuning self-assembling pathways by implementing different external stimuli has been extensively studied, owing to their effective control over structural and mechanical properties. Consequently, multicomponent peptide hydrogels with high structural tunability and stimuli responsiveness are crucial in dictating cellular behavior. Herein, we have implemented both coassembly approach and pathway-dependent self-assembly to design nonequilibrium nanostructures to understand the thermodynamic and kinetic aspects of peptide self-assembly toward controlling cellular response. Our system involved an ultrashort peptide gelator and a hydrophilic surfactant which coassembled through different pathways, i.e., heat-cool and sonication methods with variable energy input. Interestingly, it was possible to access diverse structural and mechanical properties at the nanoscale in a single coassembled system. Further, the hydrophilic surfactant provided additional surface functionalities, thus creating an efficient hydrophilic matrix for cellular interaction. Such diverse functionalities in a single coassembled system could lead to the development of advanced scaffolds, with applications in various biomedical fields.

Advancements in self-assembling peptides: Bridging gaps in 3D cell culture and electronic device fabrication

Self-assembling peptides (SAPs) show promise in creating synthetic microenvironments that regulate cellular function and tissue repair. Also, the precise π-π interactions and hydrogen bonding within self-assembled peptide structures enable the creation of quantum confined structures, leading to reduced band gaps and the emergence of semiconductor properties within the superstructures. This review emphasizes the need for standardized 3D cell culture methods and electronic devices based on SAPs for monitoring cell communication and controlling cell surface morphology. Additionally, the gap in understanding the relationship between SAP peptide sequences and nanostructures is highlighted, underscoring the importance of optimizing peptide deposition parameters, which affect charge transport and bioactivity due to varying morphologies. The potential of peptide nanofibers as extracellular matrix mimics and the introduction of the zone casting method for improved film deposition are discussed within this review, aiming to bridge knowledge gaps and offer insights into fields like tissue engineering and materials science, with the potential for groundbreaking applications at the interface of biology and materials engineering.

Ionic Strength Impacts the Physical Properties of Agarose Hydrogels

Agarose is a natural polysaccharide known for its ability to form thermoreversible hydrogels. While the effects of curing temperature and polysaccharide concentration on mechanical properties have been discussed in the literature, the role of ionic strength has been less studied. In the present manuscript, we investigate the effects of supporting salt concentration and the role of cation (i.e. Na+ or Li+, neighbors in the Hofmeister series), on the setting and performance of agarose hydrogels. Compressive and rheological measurements show that the supporting salts reduce the immediate elastic response of agarose hydrogels, with Li+ showing a stronger effect than Na+ at high ionic strength, while they significantly increase the extent of linear stress-strain response (i.e., linear elasticity). The presence of increasing amounts of added supporting salt also leads to a reduction in hysteresis during mechanical deformation due to loading and unloading cycles, which is more pronounced with Li+ than with Na+. The combination of rheological measurements and NMR relaxometry shows a mesh size in agarose hydrogels in the order of 6-17 nm, with a thickness of the water layer bound to the biopolymer of about 3 nm. Of note, the different structuring of the water within the hydrogel network due to the different alkali seems to play a role for the final performance of the hydrogels.

Characterization of Novel Cell-Adhesive Peptides for Biomaterial Development

In previous studies, my group developed cell-adhesive peptide-polysaccharide complexes as biomaterials for tissue engineering. Having a wide variety of cell-adhesive peptides is important as the biological functions of peptide-polysaccharide complexes are highly dependent on the biological activity of peptides. This paper reviews the biological activities of two types of recently characterized cell-adhesive peptides. The first is peptides rich in basic amino acids originating from octaarginine. We analyzed the relationships between the amino acid composition of basic peptides and cell adhesion, elongation, and proliferation and identified the most suitable peptide for cell culture. The second was arginine-glycine-aspartic acid (RGD)-containing peptides that promote the adhesion of induced pluripotent stem cells (iPSCs). We identified the RGD-surrounding sequences necessary for iPSC adhesion, clarified the underlying mechanism, and improved cell adhesion by modifying the structure-activity relationships. The novel cell-adhesive peptides identified in our previous studies may aid in the development of novel peptide-based biomaterials.

Current application and modification strategy of marine polysaccharides in tissue regeneration: A review

Marine polysaccharides (MPs) are exceptional bioactive materials that possess unique biochemical mechanisms and pharmacological stability, making them ideal for various tissue engineering applications. Certain MPs, including agarose, alginate, carrageenan, chitosan, and glucan have been successfully employed as biological scaffolds in animal studies. As carriers of signaling molecules, scaffolds can enhance the adhesion, growth, and differentiation of somatic cells, thereby significantly improving the tissue regeneration process. However, the biological benefits of pure MPs composite scaffold are limited. Therefore, physical, chemical, enzyme modification and other methods are employed to expand its efficacy. Chemically, the structural properties of MPs scaffolds can be altered through modifications to functional groups or molecular weight reduction, thereby enhancing their biological activities. Physically, MPs hydrogels and sponges emulate the natural extracellular matrix, creating a more conducive environment for tissue repair. The porosity and high permeability of MPs membranes and nanomaterials expedite wound healing. This review explores the distinctive properties and applications of select MPs in tissue regeneration, highlighting their structural versatility and biological applicability. Additionally, we provide a brief overview of common modification strategies employed for MP scaffolds. In conclusion, MPs have significant potential and are expected to be a novel regenerative material for tissue engineering.

Machine Learning Integrated Workflow for Predicting Schwann Cell Viability on Conductive MXene Biointerfaces

Severe injuries to the peripheral nervous system (PNS) require Schwann cells to aid in neuronal regeneration. Low-frequency electrical stimulation is known to induce the cogrowth of neurons and Schwann cells in an injured PNS. However, the correlations between electrical stimulation and Schwann cell viability are complex and not well understood. In this work, we develop a machine learning (ML)-integrated workflow that uses conductive hydrogel biointerfaces to evaluate the impacts of fabrication parameters and electrical stimulation on the Schwann cell viability. First, a hydrogel array with varying MXene and peptide loadings is fabricated, which serves as conductive biointerfaces to incubate Schwann cells and introduce various electrical stimulation (at different voltages and frequencies). Upon specific fabrication parameters and stimulation, the cell viability is evaluated and input into an artificial neural network model to train the model. Additionally, a data augmentation method is applied to synthesize 1000-fold virtual data points, enabling the construction of a high-accuracy prediction model (with a testing mean absolute error ≤11%). By harnessing the model's predictive power, we can accurately predict Schwann cell viability based on a given set of fabrication/stimulation parameters. Finally, the SHapley Additive exPlanations model interpretation provides several data-scientific insights that are validated by microscopic cellular observations. Our hybrid approach, involving conductive biointerface fabrication, ML algorithms, and data analysis, offers an unconventional platform to construct a preclinical prediction model at the cellular level.

Surface Functionalization of Electrospun Scaffolds by QK-AG73 Peptide for Enhanced Interaction with Vascular Endothelial Cells

Rapid endothelialization still remains challenging for blood-contacting biomaterials, especially for long-term, functional, small-diameter vascular grafts. The vascular endothelial growth factor (VEGF)-mimicking QK peptide holds great promise in promoting vascular endothelial cellular activities such as adhesion, spreading, proliferation, and migration. Syndecans are transmembrane proteoglycans that are highly expressed on cell surfaces, including vascular endothelial cells, which can act as docking receptors to provide binding sites for a variety of cellular growth and signaling molecules. Herein, a novel peptide QK-AG73 that coupled the QK domain with the syndecan binding peptide AG73 was proposed, aiming to synergistically enhance the interaction with vascular endothelial cells. In addition, mechanically matched bioactive scaffolds based on poly(l-lactide-co-ε-caprolactone) were successfully prepared by surface functionalization of the covalently combined QK-AG73 peptide. The result showed that the adhesion of human umbilical vein endothelial cells (HUVECs) was increased by approximately 2-fold on QK-AG73-modified surface compared with those modified with a single QK or AG73 peptide. Moreover, surface functionalization of electrospun scaffolds by this QK-AG73 peptide was more efficient in specifically promoting the proliferation of HUVECs and allowing them to grow with an elongated cobblestone-like cell morphology. It was hypothesized that both VEGF receptors and transmembrane syndecan receptors were involved in cellular regulation by the QK-AG73 peptide, which resulted in synergistic improvement of the interactions with vascular endothelial cells and provided a promising strategy to promote endothelialization of small-diameter vascular grafts.

Controlled Quenching of Agarose Defines Hydrogels with Tunable Structural, Bulk Mechanical, Surface Nanomechanical, and Cell Response in 2D Cultures

The scaffolding of agarose hydrogel networks depends critically on the rate of cooling (quenching) after heating. Efforts are made to understand the kinetics and evolution of biopolymer self-assembly upon cooling, but information is lacking on whether quenching might affect the final hydrogel structure and performance. Here, a material strategy for the fine modulation of quenching that involves temperature-curing steps of agarose is reported. Combining microscopy techniques, standard and advanced macro/nanomechanical tools, it is revealed that agarose accumulates on the surface when the curing temperature is set at 121 °C. The inhomogeneity can be mostly recovered when it is reduced to 42 °C. This has a drastic effect on the stiffness of the surface, but not on the viscoelasticity, roughness, and wettability. When hydrogels are strained at small/large deformations, the curing temperature has no effect on the viscoelastic response of the hydrogel bulk but does play a role in the onset of the non-linear region. Cells cultured on these hydrogels exhibit surface stiffness-sensing that affects cell adhesion, spreading, F-actin fiber tension, and assembly of vinculin-rich focal adhesions. Collectively, the results indicate that the temperature curing of agarose is an efficient strategy to produce networks with tunable mechanics and is suitable for mechanobiology studies.

Enhancement of Scaffold In Vivo Biodegradability for Bone Regeneration Using P28 Peptide Formulations

The field of bone tissue engineering has shown a great variety of bone graft substitute materials under development to date, with the aim to reconstruct new bone tissue while maintaining characteristics close to the native bone. Currently, insufficient scaffold degradation remains the critical limitation for the success of tailoring the bone formation turnover rate. This study examines novel scaffold formulations to improve the degradation rate in vivo, utilising chitosan (CS), hydroxyapatite (HAp) and fluorapatite (FAp) at different ratios. Previously, the P28 peptide was reported to present similar, if not better performance in new bone production to its native protein, bone morphogenetic protein-2 (BMP-2), in promoting osteogenesis in vivo. Therefore, various P28 concentrations were incorporated into the CS/HAp/FAp scaffolds for implantation in vivo. H&E staining shows minimal scaffold traces in most of the defects induced after eight weeks, showing the enhanced biodegradability of the scaffolds in vivo. The HE stain highlighted the thickened periosteum indicating a new bone formation in the scaffolds, where CS/HAp/FAp/P28 75 µg and CS/HAp/FAp/P28 150 µg showed the cortical and trabecular thickening. CS/HAp/FAp 1:1 P28 150 µg scaffolds showed a higher intensity of calcein green label with the absence of xylenol orange label, which indicates that mineralisation and remodelling was not ongoing four days prior to sacrifice. Conversely, double labelling was observed in the CS/HAp/FAp 1:1 P28 25 µg and CS/HAp/FAp/P28 75 µg, which indicates continued mineralisation at days ten and four prior to sacrifice. Based on the HE and fluorochrome label, CS/HAp/FAp 1:1 with P28 peptides presented a consistent positive osteoinduction following the implantation in the femoral condyle defects. These results show the ability of this tailored formulation to improve the scaffold degradation for bone regeneration and present a cost-effective alternative to BMP-2.

Scaffold Using Chitosan, Agarose, Cellulose, Dextran and Protein for Tissue Engineering-A Review

Biological macromolecules like polysaccharides/proteins/glycoproteins have been widely used in the field of tissue engineering due to their ability to mimic the extracellular matrix of tissue. In addition to this, these macromolecules are found to have higher biocompatibility and no/lesser toxicity when compared to synthetic polymers. In recent years, scaffolds made up of proteins, polysaccharides, or glycoproteins have been highly used due to their tensile strength, biodegradability, and flexibility. This review is about the fabrication methods and applications of scaffolds made using various biological macromolecules, including polysaccharides like chitosan, agarose, cellulose, and dextran and proteins like soy proteins, zein proteins, etc. Biopolymer-based nanocomposite production and its application and limitations are also discussed in this review. This review also emphasizes the importance of using natural polymers rather than synthetic ones for developing scaffolds, as natural polymers have unique properties, like high biocompatibility, biodegradability, accessibility, stability, absence of toxicity, and low cost.

Polysaccharide-based C-dots and polysaccharide/C-dot nanocomposites: fabrication strategies and applications

C-dots are a new class of materials with vast applications. The synthesis of bio-based C-dots has attracted increasing attention in recent years. Polysaccharides being the most abundant natural materials with high biodegradability and no toxicity have been the focus of researchers for the synthesis of C-dots. C-dots obtained from polysaccharides are generally fabricated via thermal procedures, carbonization, and microwave pyrolysis. Small size, photo-induced electron transfer (PET), and highly adjustable luminosity behavior are the most important physical and chemical properties of C-dots. However, C-dot/polysaccharide composites can be introduced as a new generation of composites that combine the features of both C-dots and polysaccharides having a wide range of applications in biomedicines, biosensors, drug delivery systems, etc. This review demonstrates the features, raw materials, and methods used for the fabrication of C-dots derived from different polysaccharides. Furthermore, the properties, applications, and synthesis conditions of various C-dot/polysaccharide composites are discussed in detail.

The impact of hypoxia and oxidative stress on proteo-metabolomic alterations of 3D cholangiocarcinoma models

The three-dimensional multicellular spheroid (3D MCS) model has been employed in cholangiocarcinoma research as it generates 3D architecture and includes more physiological relevance with the multicellular arrangement. However, it is also essential to explain the molecular signature in this microenvironment and its structural complexity. The results indicated that poorly differentiated CCA cell lines were unable to form 3D MCS due to the lack of cell adhesion molecules with more mesenchymal marker expression. The well-differentiated CCA and cholangiocyte cell lines were able to develop 3D MCSs with round shapes, smooth perimeter, and cell adhesion molecules that led to the hypoxic and oxidative microenvironment detected. For MMNK-1, KKU-213C, and KKU-213A MCSs, the proteo-metabolomic analysis showed proteins and metabolic products altered compared to 2D cultures, including cell-cell adhesion molecules, energy metabolism-related enzymes and metabolites, and oxidative-related metabolites. Therefore, the 3D MCSs provide different physiological states with different phenotypic signatures compared to 2D cultures. Considering the 3D model mimics more physiological relevance, it might lead to an alternate biochemical pathway, targeting to improve drug sensitivity for CCA treatment.

Cytophilic Agarose-Epoxide-Amine Cryogels Engineered with Granulated Microstructures

Inherent cytophobicity of agarose limits its direct use for the growth of anchorage-dependent cells. Here, we report a simple strategy allowing the development of agarose-based hydrogels entailed with both cytophilicity and microstructured morphology. Through the reaction of water-soluble 1,4-butanediol diglycidyl ether (BDDE) with trifunctional polyetheramine Jeffamine T403 in agarose solution followed by cryogelation of the mixtures, a series of macroporous agarose-epoxide-amine cryogels were prepared readily. Results from fluorescent labeling and energy-dispersive X-ray elemental mapping showed the formation of granulated microstructures in the cryogels. Such features closely correlated to the phase separation of BDDE-T403 polymers within the agarose matrix. Cytophilicity of the microstructured cryogels due to the integrated amine moieties was demonstrated through the adhesion of fibroblasts. Functional enrichment of the cryogels was further highlighted by leveraging the granulates as micro-reservoirs for polyphenol proanthocyanidin to enable antioxidation and protection of fibroblasts from H₂O₂-induced cytotoxic effect in vitro.

Effect of Amino Acid Substitution on Cell Adhesion Properties of Octa-arginine

Octa-arginine (R8) is a cell-permeable peptide with excellent cell adhesion properties. Surface-immobilized R8 mediates cell attachment via cell surface receptors, such as heparan sulfate proteoglycans and integrin β1, and promotes cell spreading and proliferation. However, it is not clear how these properties are affected by specific peptide composition and if they could be improved. Here, we synthesized XR8 peptides, in which half of the original R8 arginine residues were replaced with another amino acid (X). We then aimed to investigate the effect of the substitution on cell adhesion and proliferation on XR8-conjugated agarose matrices. The XR8-matrix showed slightly better cell attachment when X was a hydrophobic or aromatic amino acid. However, hydrophobic XR8-matrices tended to promote cell proliferation to a less extent. Eventually, YR8-matrix most efficiently promoted cell adhesion, spreading, and proliferation among the XR8-matrices tested. Collectively, these observations indicate that the properties of residue X play a major role in the biological activity of XR8-matrices and shed light on the interaction between small peptides and the cell membrane. Further, YR8 is a promising cell-adhesive peptide for the development of cell culture substrates and biomaterials.

Electrochemically Synthesized Polyacrylamide Gel and Core-Shell Nanoparticles for 3D Cell Culture Formation

Biocompatible polyacrylamide gel and core-shell nanoparticles (NPs) were synthesized using a one-step electrochemically initiated gelation. Constant-potential electrochemical decomposing of ammonium persulfate initiated the copolymerization of N-isopropyl acrylamide, methacrylic acid, and N,N'-methylenebisacrylamide monomers. This decomposing potential and monomers' concentrations were optimized to prepare gel NPs and thin gel film-grafted core-shell NPs. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) imaging confirmed the gel NP formation. The lyophilized gel NPs and core-shell NPs were applied to support the three-dimensional (3D) cell culture. In all, core-shell NPs provided superior support for complex 3D tissue structures.

RGDX1 X2 motif regulates integrin αvβ5 binding for pluripotent stem cell adhesion

The arginine-glycine-aspartic acid (RGD) motif is a cell adhesion sequence that binds to integrins. Some RGD-containing peptides promote adhesion of both embryonic stem cells and induced pluripotent stem cells (iPSCs); however, not all such RGD-containing peptides are active. In this study, we elucidated the role of RGD-neighboring sequences on iPSC adhesion using diverse synthetic peptides and recombinant proteins. Our results indicate that iPSC adhesion requires RGDX₁ X₂  sequences, such as RGDVF and RGDNY, and that the X₁ X₂ residues are essential for the adhesion via integrin αvβ5 but not αvβ3. iPSCs express integrin αvβ5 but not αvβ3; therefore, iPSC adhesion requires the RGDX₁ X₂ -containing sequences. The importance of the X₁ X₂ residues was confirmed with both HeLa and A549 cells, which express integrin αvβ5 but not αvβ3. Analysis of RGD-neighboring sequences provides important insights into ligand-binding specificity of integrins. Identification of integrin αvβ5-binding motifs is potentially useful in drug development, drug delivery, cell culture, and tissue engineering.

Current Understanding of Hydrogel for Drug Release and Tissue Engineering

Due to their good absorption, satisfactory biocompatibility, and high safety, hydrogels have been widely used in the field of biomedicine, including for drug delivery and tissue regeneration. In this review, we introduce the characteristics and crosslinking methods of natural and synthetic hydrogels. Then, we highlight the design and principle of intelligent hydrogels (i.e., responsive hydrogels) used for drug release. Moreover, we introduce the application of the application of hydrogels in drug release and tissue engineering, and the limitations and research directions of hydrogel in drug release and tissue engineering are also considered. We hope that this review can provide a reference for follow-up studies in related fields.

Multiparametric Material Functionality of Microtissue-Based In Vitro Models as Alternatives to Animal Testing

With the definition of the 3R principle by Russel and Burch in 1959, the search for an adequate substitute for animal testing has become one of the most important tasks and challenges of this time, not only from an ethical, but also from a scientific, economic, and legal point of view. Microtissue-based in vitro model systems offer a valuable approach to address this issue by accounting for the complexity of natural tissues in a simplified manner. To increase the functionality of these model systems and thus make their use as a substitute for animal testing more likely in the future, the fundamentals need to be continuously improved. Corresponding requirements exist in the development of multifunctional, hydrogel-based materials, whose properties are considered in this review under the aspects of processability, adaptivity, biocompatibility, and stability/degradability.

Three-Dimensional Modelling of Ovarian Cancer: From Cell Lines to Organoids for Discovery and Personalized Medicine

Ovarian cancer has the highest mortality of all of the gynecological malignancies. There are several distinct histotypes of this malignancy characterized by specific molecular events and clinical behavior. These histotypes have differing responses to platinum-based drugs that have been the mainstay of therapy for ovarian cancer for decades. For histotypes that initially respond to a chemotherapeutic regime of carboplatin and paclitaxel such as high-grade serous ovarian cancer, the development of chemoresistance is common and underpins incurable disease. Recent discoveries have led to the clinical use of PARP (poly ADP ribose polymerase) inhibitors for ovarian cancers defective in homologous recombination repair, as well as the anti-angiogenic bevacizumab. While predictive molecular testing involving identification of a genomic scar and/or the presence of germline or somatic BRCA1 or BRCA2 mutation are in clinical use to inform the likely success of a PARP inhibitor, no similar tests are available to identify women likely to respond to bevacizumab. Functional tests to predict patient response to any drug are, in fact, essentially absent from clinical care. New drugs are needed to treat ovarian cancer. In this review, we discuss applications to address the currently unmet need of developing physiologically relevant in vitro and ex vivo models of ovarian cancer for fundamental discovery science, and personalized medicine approaches. Traditional two-dimensional (2D) in vitro cell culture of ovarian cancer lacks critical cell-to-cell interactions afforded by culture in three-dimensions. Additionally, modelling interactions with the tumor microenvironment, including the surface of organs in the peritoneal cavity that support metastatic growth of ovarian cancer, will improve the power of these models. Being able to reliably grow primary tumoroid cultures of ovarian cancer will improve the ability to recapitulate tumor heterogeneity. Three-dimensional (3D) modelling systems, from cell lines to organoid or tumoroid cultures, represent enhanced starting points from which improved translational outcomes for women with ovarian cancer will emerge.

Octa-arginine and Octa-lysine Promote Cell Adhesion through Heparan Sulfate Proteoglycans and Integrins

Octa-arginine (R8) has been extensively studied as a cell-penetrating peptide. R8 binds to diverse transmembrane heparan sulfate proteoglycans (HSPGs), including syndecans, and is internalized by cells. R8 is also reported to bind to integrin β1. In this study, we evaluated the biological activities of R8 and octa-lysine (K8), a peptide similar to R8, with a focus on cell adhesion. R8 and K8 were immobilized on aldehyde-agarose matrices via covalent conjugation, and the effect of these peptides on cell attachment, spreading, and proliferation was examined using human dermal fibroblasts. The results indicated that R8- and K8-matrices mediate cell adhesion mainly via HSPGs. Moreover, R8- and K8-matrices interacted with integrin β1 and promote cell spreading and proliferation. These results are useful for further understanding of the R8-membrane interactions and the cellular uptake mechanisms. In addition, the R8- and K8-matrices may potentially be used as a multi-functional biomaterial to promote cell adhesion, spreading, and proliferation.

Recent advances of natural biopolymeric culture scaffold: synthesis and modification

Traditionally existing 2D culture scaffold has been inappropriately validated due to the failure in generating the precise therapeutic response. Therefore, this leads to the fabrication of 3D culture scaffold resolving the limitations in the in vivo environment. In recent years, tissue engineering played an important role in the field of bio-medical engineering. Biopolymer material, a novel natural material with excellent properties of nontoxic and biodegradable merits can be served as culture scaffold. This review summarizes the modifications of natural biopolymeric culture scaffold with different crosslinkers and their application. In addition, this review provides the recent progress of natural biopolymeric culture scaffold mainly focusing on their properties, synthesizing and modification and application.

3D Cell Culture Systems: Tumor Application, Advantages, and Disadvantages

The traditional two-dimensional (2D) in vitro cell culture system (on a flat support) has long been used in cancer research. However, this system cannot be fully translated into clinical trials to ideally represent physiological conditions. This culture cannot mimic the natural tumor microenvironment due to the lack of cellular communication (cell-cell) and interaction (cell-cell and cell-matrix). To overcome these limitations, three-dimensional (3D) culture systems are increasingly developed in research and have become essential for tumor research, tissue engineering, and basic biology research. 3D culture has received much attention in the field of biomedicine due to its ability to mimic tissue structure and function. The 3D matrix presents a highly dynamic framework where its components are deposited, degraded, or modified to delineate functions and provide a platform where cells attach to perform their specific functions, including adhesion, proliferation, communication, and apoptosis. So far, various types of models belong to this culture: either the culture based on natural or synthetic adherent matrices used to design 3D scaffolds as biomaterials to form a 3D matrix or based on non-adherent and/or matrix-free matrices to form the spheroids. In this review, we first summarize a comparison between 2D and 3D cultures. Then, we focus on the different components of the natural extracellular matrix that can be used as supports in 3D culture. Then we detail different types of natural supports such as matrigel, hydrogels, hard supports, and different synthetic strategies of 3D matrices such as lyophilization, electrospiding, stereolithography, microfluid by citing the advantages and disadvantages of each of them. Finally, we summarize the different methods of generating normal and tumor spheroids, citing their respective advantages and disadvantages in order to obtain an ideal 3D model (matrix) that retains the following characteristics: better biocompatibility, good mechanical properties corresponding to the tumor tissue, degradability, controllable microstructure and chemical components like the tumor tissue, favorable nutrient exchange and easy separation of the cells from the matrix.

Improvement of wound healing by the development of ECM-inspired biomaterial coatings and controlled protein release

Implant design has evolved from biochemically inert substrates, minimizing cell and protein interaction, towards sophisticated bioactive substrates, modulating the host response and supporting the regeneration of the injured tissue. Important aspects to consider are the control of cell adhesion, the discrimination of bacteria and non-local cells from the desired tissue cell type, and the stimulation of implant integration and wound healing. Here, the extracellular matrix acts as a role model providing us with inspiration for sophisticated designs. Within this scope, small bioactive peptides have proven to be miscellaneously deployable for the mediation of surface, cell and matrix interactions. Combinations of adhesion ligands, proteoglycans, and modulatory proteins should guide multiple aspects of the regeneration process and cooperativity between the different extracellular matrix components, which bears the chance to maximize the therapeutic efficiency and simultaneously lower the doses. Hence, efforts to include multiple of these factors in biomaterial design are well worth. In the following, multifunctional implant coatings based on bioactive peptides are reviewed and concepts to implement strong surface anchoring for stable cell adhesion and a dynamic delivery of modulator proteins are discussed.

Recent Advances in Three-Dimensional Multicellular Spheroid Culture and Future Development

Three-dimensional multicellular spheroids (MCSs) have received extensive attention in the field of biomedicine due to their ability to simulate the structure and function of tissues in vivo more accurately than traditional in vitro two-dimensional models and to simulate cell-cell and cell extracellular matrix (ECM) interactions. It has become an important in vitro three-dimensional model for tumor research, high-throughput drug screening, tissue engineering, and basic biology research. In the review, we first summarize methods for MCSs generation and their respective advantages and disadvantages and highlight the advances of hydrogel and microfluidic systems in the generation of spheroids. Then, we look at the application of MCSs in cancer research and other aspects. Finally, we discuss the development direction and prospects of MCSs.