Screening and Matching Amphiphilic Cationic Polymers for Efficient Antibiosis

Preparation and characterization of a polyurethane-based sponge wound dressing with a superhydrophobic layer and an antimicrobial adherent hydrogel layer

Bacterial infection poses a significant impediment in wound healing, necessitating the development of dressings with intrinsic antimicrobial properties. In this study, a multilayered wound dressing (STPU@MTAI2/AM1) was reported, comprising a surface-superhydrophobic treated polyurethane (STPU) sponge scaffold coupled with an antimicrobial hydrogel. A superhydrophobic protective outer layer was established on the hydrophilic PU sponge through the application of fluorinated zinc oxide nanoparticles (F-ZnO NPs), thereby resistance to environmental contamination and bacterial invasion. The adhesive and antimicrobial inner layer was an attached hydrogel (MTAI2/AM1) synthesized through the copolymerization of N-[2-(methacryloyloxy)ethyl]-N, N, N-trimethylammonium iodide and acrylamide, exhibits potent adherence to dermal surfaces and broad-spectrum antimicrobial actions against resilient bacterial strains and biofilm formation. STPU@MTAI2/AM1 maintained breathability and flexibility, ensuring comfort and conformity to the wound site. Biocompatibility of the multilayered dressing was demonstrated through hemocompatibility and cytocompatibility studies. The multilayered wound dressing has demonstrated the ability to promote wound healing when addressing MRSA-infected wounds. The hydrogel layer demonstrates no secondary damage when peeled off compared to commercial polyurethane sponge dressing. The STPU@MTAI2/AM1-treated wounds were nearly completely healed by day 14, with an average wound area of 12.2 ± 4.3 %, significantly lower than other groups. Furthermore, the expression of CD31 was significantly higher in the STPU@MTAI2/AM1 group compared to other groups, promoting angiogenesis in the wound and thereby contributing to wound healing. Therefore, the prepared multilayered wound dressing presents a promising therapeutic candidate for the management of infected wounds. STATEMENT OF SIGNIFICANCE: Healing of chronic wounds requires avoidance of biofouling and bacterial infection. However developing a wound dressing which is both anti-biofouling and antimicrobial is a challenge. A multilayered wound dressing with multifunction was developed. Its outer layer was designed to be superhydrophobic and thus anti-biofouling, and its inner layer was broad-spectrum antimicrobial and could inhibit biofilm formation. The multilayered wound dressing with adhesive property could easily be removed from the wound surface preventing the cause of secondary damage. The multilayered wound dressing has demonstrated good abilities to promote MRSA-infected wound healing and presents a viable treatment for MRSA-infected wound.

Influence of the linkage between long alkyl tails and cationic groups on membrane activity of nano-sized hyperbranched polyquaterniums

The recurrent emergence of serious pathogens necessitates novel insights and highly efficient antibacterial agents. However, the innate inability of metal ions and reactive oxygen species (ROS) to differentiate between bacteria and mammalian cells presents a challenge, limiting the selectivity crucial for an ideal antimicrobial solution. Herein, we present a systematic exploration involving two variants of nano-sized hyperbranched polyquaterniums (NHBPQs) - one featuring a lengthy alkyl tail linked to the ammonium unit at the N-atom center (NHBPQ-A), and the other in a segregated configuration (NHBPQ-B). The exterior alkyl chain chains act as a barrier to the cationic group's non-specific adsorption due to spatial site resistance, causing NHBPQ-A in broad-spectrum cytotoxicity. Conversely, the distinct molecular configuration of NHBPQ-B in the segregated state affords greater flexibility, allowing the cationic groups to be released and interact non-specifically, finally resulting in selective bactericidal activity. Leveraging this selectivity, the optimized NHBPQ-B exhibits robust anti-infectious performance in a model of methicillin-resistant Staphylococcus aureus (MRSA)-infected wounds. This work establishes a promising avenue for biocompatible NHBPQs, holding significant potential in addressing MRSA infections and ameliorating both genetically encoded and phenotypic antibiotic resistance mechanisms.

The One-Stop Integrated Nanoagent Based on Photothermal Therapy for Deep Infection Healing and Inflammation Inhibition

Chronic wounds caused by bacterial infections are a major challenge in medical fields. The hypoxia condition extremely induces reactive oxygen species (ROS) generation and upregulates the expression of hypoxia-inducible factor, both of which can increase the pro-inflammatory M1 subtype macrophages production while reducing the anti-inflammatory M2 subtype macrophages. Besides, bacteria-formed biofilms can hinder the penetration of therapeutic agents. Encouraged by natural motors automatically executing tasks, hypothesized that supplying sufficient oxygen (O2 ) would simultaneously drive therapeutic agent movement, rescue the hypoxic microenvironment, and disrupt the vicious cycle of inflammation. Here, small organic molecule-based nanoparticles (2TT-mC6B@Cu5.4 O NPs) that possess high photothermal conversion efficiency and enzymatic activities are developed, including superoxide dismutase-, catalase-, and glutathione peroxidase-like activity. 2TT-mC6B@Cu5.4 O NPs exhibit superior ROS-scavenging and O2 production abilities that synergistically relieve inflammation, alleviate hypoxia conditions, and promote their deep penetration in chronic wound tissues. Transcriptome analysis further demonstrates that 2TT-mC6B@Cu5.4O NPs inhibit biological activities inside bacteria. Furthermore, in vivo experiments prove that 2TT-mC6B@Cu5.4 O NPs-based hyperthermia can effectively eliminate bacteria in biofilms to promote wound healing.

Towards Antibacterial Agents: Synthesis and Biological Activity of Multivalent Amide Derivatives of Thiacalix[4]arene with Hydroxyl and Amine Groups

Antimicrobial resistance to modern antibiotics stimulates the search for new ways to synthesize and modify antimicrobial drugs. The development of synthetic approaches that can easily change different fragments of the molecule is a promising solution to this problem. In this work, a synthetic approach was developed to obtain multivalent thiacalix[4]arene derivatives containing different number of amine and hydroxyl groups. A series of macrocyclic compounds in cone, partial cone, and 1,3-alternate stereoisomeric forms containing -NHCH2CH2R (R = NH2, N(CH3)2, and OH) and -N(CH2CH2OH)2 terminal fragments, and their model non-macrocyclic analogues were obtained. The antibacterial activity against Gram-positive (Staphylococcus aureus, Bacillus cereus, and Enterococcus faecalis) and Gram-negative (Escherichia coli and Pseudomonas aeruginosa) bacterial strains and cytotoxicity of the obtained compounds were studied. Structure-activity relationships were established: (1) the macrocyclic compounds had high antibacterial activity, while the monomeric compounds had low activity; (2) the compounds in cone and partial cone conformations had better antibacterial activity compared to the compounds in 1,3-alternate stereoisomeric form; (3) the macrocyclic compounds containing -NHCH2CH2N(CH3)2 terminal fragments had the highest antibacterial activity; (4) introduction of additional terminal hydroxyl groups led to a significant decrease in antibacterial activity; (5) the compounds in partial cone conformation had significant bactericidal activity against all studied cell strains; the best selectivity was observed for the compounds in cone conformation. The mechanism of antibacterial activity of lead compounds with terminal fragments -NHCH2CH2N(CH3)2 was proved using model negatively charged POPG vesicles, i.e., the addition of these compounds led to an increase in the size and zeta potential of the vesicles. The obtained results open up the possibility of using the synthesized macrocyclic compounds as promising antibacterial agents.

Nanotechnology-Based Drug Delivery Systems to Control Bacterial-Biofilm-Associated Lung Infections

Airway mucus dysfunction and impaired immunological defenses are hallmarks of several lung diseases, including asthma, cystic fibrosis, and chronic obstructive pulmonary diseases, and are mostly causative factors in bacterial-biofilm-associated respiratory tract infections. Bacteria residing within the biofilm architecture pose a complex challenge in clinical settings due to their increased tolerance to currently available antibiotics and host immune responses, resulting in chronic infections with high recalcitrance and high rates of morbidity and mortality. To address these unmet clinical needs, potential anti-biofilm therapeutic strategies are being developed to effectively control bacterial biofilm. This review focuses on recent advances in the development and application of nanoparticulate drug delivery systems for the treatment of biofilm-associated respiratory tract infections, especially addressing the respiratory barriers of concern for biofilm accessibility and the various types of nanoparticles used to combat biofilms. Understanding the obstacles facing pulmonary drug delivery to bacterial biofilms and nanoparticle-based approaches to combatting biofilm may encourage researchers to explore promising treatment modalities for bacterial-biofilm-associated chronic lung infections.

Understanding How Cationic Polymers' Properties Inform Toxic or Immunogenic Responses via Parametric Analysis

Cationic polymers are widely used materials in diverse biotechnologies. Subtle variations in these polymers' properties can change them from exceptional delivery agents to toxic inflammatory hazards. Conventional screening strategies optimize for function in a specific application rather than observing how underlying polymer-cell interactions emerge from polymers' properties. An alternative approach is to map basic underlying responses, such as immunogenicity or toxicity, as a function of basic physicochemical parameters to inform the design of materials for a breadth of applications. To demonstrate the potential of this approach, we synthesized 107 polymers varied in charge, hydrophobicity, and molecular weight. We then screened this library for cytotoxic behavior and immunogenic responses to map how these physicochemical properties inform polymer-cell interactions. We identify three compositional regions of interest and use confocal microscopy to uncover the mechanisms behind the observed responses. Finally, immunogenic activity is confirmed in vivo. Highly cationic polymers disrupted the cellular plasma membrane to induce a toxic phenotype, while high molecular weight, hydrophobic polymers were uptaken by active transport to induce NLRP3 inflammasome activation, an immunogenic phenotype. Tertiary amine- and triethylene glycol-containing polymers did not invoke immunogenic or toxic responses. The framework described herein allows for the systematic characterization of new cationic materials with different physicochemical properties for applications ranging from drug and gene delivery to antimicrobial coatings and tissue scaffolds.

Supramolecular Self-Healing Antifouling Coating for Dental Materials

In orthodontic treatment, orthodontic appliances are prone to bacterial infections, which pose a risk to oral health. Surface modification of orthodontic appliances has been explored to improve their antifouling properties and impart antibacterial capabilities, inhibiting initial bacterial adhesion and biofilm formation. However, coatings are susceptible to damage in the complex oral environment, leading to a loss of functionality. Here, we have prepared an antifouling self-healing coating based on supramolecular bonding by employing a simple spin coating method. The presence of the hydrophilic zwitterionic trimethylamine N-oxide (TMAO) and the hydrophobic antimicrobial moieties triclosan acrylate (TCSA) imparts to the polymers an amphiphilic structure and enhances the interaction with bacteria, resulting in excellent antimicrobial activity and surface antifouling properties. The multiple hydrogen bonds of ureido-pyrimidinone methacrylate (UPyMA) and ionic interactions contained in the polymers not only increased the adhesion of the coating to the material substrate (approximately 3 times) but also endowed the coating with the intrinsic self-healing ability to restore the antibiofouling properties at oral temperature and humidity. Finally, the polymer coating is biologically safe both in vitro and in vivo, showing no cytotoxic effects on cells and tissues. This research offers a promising avenue for improving the performance of orthodontic appliances and contributes to the maintenance and treatment of oral health.

Highly active nanoparticle enhanced rapid adsorption-killing mechanism to combat multidrug-resistant bacteria

Contact-killing surfaces with the ability to rapidly adsorb and kill microorganisms are desperately needed since the rapid outbreak of multidrug-resistant (MDR) bacteria poses a serious threat to human health. Therefore, a series of amphiphilic nanoengineered polyquaterniums (ANPQs) were synthesized, and immobilizing ANPQs onto equipment surfaces provided a simple method for preventing microbial infections. The strong charge-positive property of ANPQ offered the possibility of rapid adsorption and efficient killing, such that all bacteria are adsorbed after 10 seconds of contact with ANPQ-treated fabrics, and more than 99.99% of pathogens are killed within 30 seconds. Surprisingly, the adsorption-killing mechanism made it difficult for bacteria to develop resistance to ANPQ coating, even after long-term repeated treatment. Importantly, in a Methicillin-resistant Staphylococcus aureus infection model, ANPQ-treated fabrics exhibited a potent anti-infectious performance while remaining nontoxic. It is envisaged that the strategy of using ANPQ coating undoubtedly provides a promising candidate for fighting MDR strains.

Main-Chain Cationic Bile Acid Polymers Mimicking Facially Amphiphilic Antimicrobial Peptides

Antibiotic-resistant bacterial infections have led to an increased demand for antibacterial agents that do not contribute to antimicrobial resistance. Antimicrobial peptides (AMPs) with the facially amphiphilic structures have demonstrated remarkable effectiveness, including the ability to suppress antibiotic resistance during bacterial treatment. Herein, inspired by the facially amphiphilic structure of AMPs, the facially amphiphilic skeletons of bile acids (BAs) are utilized as building blocks to create a main-chain cationic bile acid polymer (MCBAP) with macromolecular facial amphiphilicity via polycondensation and a subsequent quaternization. The optimal MCBAP displays an effective activity against Gram-positive methicillin-resistant Staphylococcus aureus (MRSA) and Gram-negative Escherichia coli, fast killing efficacy, superior bactericidal stability in vitro, and potent anti-infectious performance in vivo using the MRSA-infected wound model. MCBAP shows the low possibility to develop drug-resistant bacteria after repeated exposure, which may ascribe to the macromolecular facial amphiphilicity promoting bacterial membrane disruption and the generation of reactive oxygen species. The easy synthesis and low cost of MCBAP, the superior antimicrobial performance, and the therapeutic potential in treating MRSA infection altogether demonstrate that BAs are a promising group of building blocks to mimic the facially amphiphilic structure of AMPs in treating MRSA infection and alleviating antibiotic resistance.

The Antimicrobial and Antibiofilm Potential of New Water-Soluble Tris-Quaternary Ammonium Compounds

The invention and innovation of highly effective antimicrobials are always crucial tasks for medical and organic chemistry, especially at the current time, when there is a serious threat of shortages of effective antimicrobials following the pandemic. In the study presented in this article, we established a new approach to synthesizing three novel series of bioactive water-soluble tris-quaternary ammonium compounds using an optimized one-pot method, and we assessed their antimicrobial and antibiofilm potential. Five pathogenic microorganisms of the ESKAPE group, including highly resistant clinical isolates, were used as the test samples. Moreover, we highlighted the dependence of antibacterial activity from the hydrophilic-hydrophobic balance of the QACs and noted the significant performance of the desired products on biofilms with MBEC as low as 16 mg/L against bacteria and 8 mg/L against fungi. Particularly notable was the high activity against Pseudomonas aeruginosa and Acinetobacter baumannii, which are among the most resilient bacteria known. The presented work will provide useful insights for future research on the topic.

Combining SNAPs with antibiotics shows enhanced synergistic efficacy against S. aureus and P. aeruginosa biofilms

Biofilm infections are associated with a high mortality risk for patients. Antibiotics perform poorly against biofilm communities, so high doses and prolonged treatments are often used in clinical settings. We investigated the pairwise interactions of two synthetic nano-engineered antimicrobial polymers (SNAPs). The g-D50 copolymer was synergistic with penicillin and silver sulfadiazine against planktonic Staphylococcus aureus USA300 in synthetic wound fluid. Furthermore, the combination of g-D50 and silver sulfadiazine showed a potent synergistic antibiofilm activity against S. aureus USA300 using in vitro and ex vivo wound biofilm models. The a-T50 copolymer was synergistic with colistin against planktonic Pseudomonas aeruginosa in synthetic cystic fibrosis medium, and this pair showed a potent synergistic antibiofilm activity against P. aeruginosa in an ex vivo cystic fibrosis lung model. SNAPs thus have the potential for increased antibiofilm performance in combination with certain antibiotics to shorten prolonged treatments and reduce dosages against biofilm infection.

From Antibacterial to Antibiofilm Targeting: An Emerging Paradigm Shift in the Development of Quaternary Ammonium Compounds (QACs)

In a previous development stage, mostly individual antibacterial activity was a target in the optimization of biologically active compounds and antiseptic agents. Although this targeting is still valuable, a new trend has appeared since the discovery of superhigh resistance of bacterial cells upon their aggregation into groups. Indeed, it is now well established that the great majority of pathogenic germs are found in the environment as surface-associated microbial communities called biofilms. The protective properties of biofilms and microbial resistance, even to high concentrations of biocides, cause many chronic infections in medical settings and lead to serious economic losses in various areas. A paradigm shift from individual bacterial targeting to also affecting more complex cellular frameworks is taking place and involves multiple strategies for combating biofilms with compounds that are effective at different stages of microbiome formation. Quaternary ammonium compounds (QACs) play a key role in many of these treatments and prophylactic techniques on the basis of both the use of individual antibacterial agents and combination technologies. In this review, we summarize the literature data on the effectiveness of using commercially available and newly synthesized QACs, as well as synergistic treatment techniques based on them. As an important focus, techniques for developing and applying antimicrobial coatings that prevent the formation of biofilms on various surfaces over time are discussed. The information analyzed in this review will be useful to researchers and engineers working in many fields, including the development of a new generation of applied materials; understanding biofilm surface growth; and conducting research in medical, pharmaceutical, and materials sciences. Although regular studies of antibacterial activity are still widely conducted, a promising new trend is also to evaluate antibiofilm activity in a comprehensive study in order to meet the current requirements for the development of highly needed practical applications.

Recent Advances in Nanoparticle-Mediated Co-Delivery System: A Promising Strategy in Medical and Agricultural Field

Drug and gene delivery systems mediated by nanoparticles have been widely studied for life science in the past decade. The application of nano-delivery systems can dramatically improve the stability and delivery efficiency of carried ingredients, overcoming the defects of administration routes in cancer therapy, and possibly maintaining the sustainability of agricultural systems. However, delivery of a drug or gene alone sometimes cannot achieve a satisfactory effect. The nanoparticle-mediated co-delivery system can load multiple drugs and genes simultaneously, and improve the effectiveness of each component, thus amplifying efficacy and exhibiting synergistic effects in cancer therapy and pest management. The co-delivery system has been widely reported in the medical field, and studies on its application in the agricultural field have recently begun to emerge. In this progress report, we summarize recent progress in the preparation and application of drug and gene co-delivery systems and discuss the remaining challenges and future perspectives in the design and fabrication.

N,N-dimethyl chitosan oligosaccharide (DMCOS) promotes antifungal activity by causing mitochondrial damage

By modifying chitosan oligosaccharide (COS) with the Eschweiler-Clarke reaction, the chitosan oligosaccharide derivative DMCOS was synthesized. FT-IR, 1D and 2D NMR spectra, MALDI-ToF MS, and elemental analysis were applied to analyze the structure of DMCOS, which revealed that the primary amines were converted into tertiary amines after methylation. DMCOS displayed less thermal stability than COS. In comparison to COS, it was discovered that DMCOS possessed more potent antimicrobial activity against four bacterial strains (Staphylococcus aureus, methicillin-resistant Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa) and three yeast strains (Candida albicans, Candida tropicalis, and Candida parapsilosis). The antioxidant studies indicated that DMCOS had less antioxidant activity than COS. Consequently, ROS level elevated in C. albicans cells following treatment with DMCOS, which decreased mitochondrial membrane potential. It was recalled that DMCOS may kill C. albicans by causing mitochondrial damage. In addition, DMCOS was demonstrated to be non-cytotoxic.

Theranostic FRET Gate to Visualize and Quantify Bacterial Membrane Breaching

Designing new antimicrobial-cum-probes to study real-time bacterial membrane breaching and concurrently developing inquisitorial image-based analytical tools is essential for the treatment of infectious diseases. An array of aggregation-induced emission (AIE) polymers (donor) consisting of neutral, anionic, and cationic charges were designed and employed as antimicrobial theranostic gatekeepers for the permeabilization of the peptidoglycan layer-adherable crystal violet (CV, acceptor). An AIE-active tetraphenylethylene (TPE)-tagged polycaprolactone biodegradable platform was chosen, and their self-assembled tiny amphiphilic nanoparticles were employed as a gatekeeper in the construction of bacterial membrane-reinforced fluorescent resonance energy transfer (FRET) probes. Electrostatic adhering of the cationic AIE polymer and subsequent gate opening aided fluorescent FRET probe activation on the membrane of Gram-negative bacteria, Escherichia coli. The selective photoexcitation energy transfer process in confocal microscopy experiments facilitated the building of a visualization-based FRET assay for the quantification of bactericidal activity. Nonantimicrobial AIE polymers (neutral and anionic) did not breach the bacterial membrane, resulting in no FRET signal. Detailed photophysical studies were done to establish the FRET probe mechanism, and a proof of concept was established.

Self-Assembled Cationic Nanoparticles Combined with Curcumin against Multidrug-Resistant Bacteria

The overuse of antibiotics exacerbates the development of antibiotic-resistant bacteria, threatening global public health, while most traditional antibiotics act on specific targets and sterilize through chemical modes. Therefore, it is a desperate need to design novel therapeutics or extraordinary strategies to overcome resistant bacteria. Herein, we report a positively charged nanocomposite PNs-Cur with a hydrodynamic diameter of 289.6 nm, which was fabricated by ring-opening polymerization of ε-caprolactone and Z-Lys-N-carboxyanhydrides (NCAs), and then natural curcumin was loaded onto the PCL core of PNs with a nanostructure through self-assembly, identified through UV-vis, and characterized by scanning electron microscopy (SEM) and dynamic light scattering (DLS). Especially, the self-assembly dynamics of PNs was simulated through molecular modeling to confirm the formation of a core-shell nanostructure. Biological assays revealed that PNs-Cur possessed broad-spectrum and efficient antibacterial activities against both Gram-positive and Gram-negative bacteria, including drug-resistant clinical bacteria and fungus, with MIC values in the range of 8-32 μg/mL. Also, in vivo evaluation showed that PNs-Cur exhibited strong antibacterial activities in infected mice. Importantly, the nanocomposite did not indeed induce the emergence of drug-resistant bacterial strains even after 21 passages, especially showing low toxicity regardless of in vivo or in vitro. The study of the antibacterial mechanism indicated that PNs-Cur could indeed destruct membrane potential, change the membrane potential, and cause the leakage of the cytoplasm. Concurrently, the released curcumin further plays a bactericidal role, eventually leading to bacterial irreversible apoptosis. This unique bacterial mode that PNs-Cur possesses may be the reason why it is not easy to make the bacteria susceptible to easily produce drug resistance. Overall, the constructed PNs-Cur is a promising antibacterial material, which provides a novel strategy to develop efficient antibacterial materials and combat increasingly prevalent bacterial infections.

Secondary Ammonium-Based Hyperbranched Poly(amidoamine) with Excellent Membrane-Active Property for Multidrug-Resistant Bacterial Infection

With the rapid emergence of microbial infections induced by "superbugs", public health and the global economy are threatened by the lack of effective and biocompatible antibacterial agents. Herein, we systematically design a series of secondary ammonium-based hyperbranched poly(amidoamine) (SAHBP) with different alkyl chain lengths for probing high-efficacy antibacterial agents. SAHBP modified with alkyl tails at the hyperbranched core could efficiently kill Escherichia coli and Staphylococcus aureus, two types of clinically important bacteria worldwide. The best SAHBP with 12-carbon-long alkyl tails (SAHBP-12) also showed high activity against problematic multidrug-resistant bacteria, including Pseudomonas aeruginosa and methicillin-resistant S. aureus (MRSA). Based on ζ potential, isothermal titration microcalorimetry (ITC), and membrane integrity assays, it is found that SAHBP-12 could attach to the cell membrane via electrostatic adsorption and hydrophobic interactions, following which the integrity of the bacterial cell wall and the cell membrane is disrupted, resulting in severe cell membrane damage and the leakage of cytoplasmic contents, finally causing bacterial cell death. Impressively, benefiting from excellent membrane-active property, SAHBP-12 exhibited robust therapeutic efficacy in MRSA-infected mice wounds. Moreover, SAHBP-12 also showed excellent biosafety in vitro and in vivo, which undoubtedly distinguished it as a potent weapon in combating the growing threat of problematic multidrug-resistant bacterial infections.

Effective Therapy of Drug-Resistant Bacterial Infection by Killing Planktonic Bacteria and Destructing Biofilms with Cationic Photosensitizer Based on Phosphindole Oxide

Developing effective therapies to fight against biofilm-associated infection is extremely urgent. The complex environment of biofilm forces the bacteria to evade the elimination of antibiotics, resulting in recalcitrant chronic infections. To address this issue, a cationic antibacterial agent based on phosphindole oxide (β-PM-PIO) is designed and prepared. The unique molecular structure endows β-PM-PIO with aggregation-induced emission feature and efficient singlet oxygen generation ability. β-PM-PIO shows excellent visual diagnostic function to planktonic bacteria and biofilm. In addition, owing to the synergistic effect of phototoxicity and dark toxicity, β-PM-PIO can achieve superb antibacterial and antibiofilm performance against Gram-positive bacteria with less potential of developing drug resistance. Notably, β-PM-PIO also holds excellent anti-infection capacity against drug-resistant bacteria in vivo with negligible side effects. This work offers a promising platform to develop advanced antibacterial agents against multidrug-resistant bacterial infection.

Chirality-influenced antibacterial activity of methylthiazole- and thiadiazole-based supramolecular biocompatible hydrogels

Chiral stereochemistry is a unique and fundamental strategy that determines the interaction of bacteria cells with chiral biomolecules and stereochemical surfaces. The interaction between bacteria and material surface (molecular chirality or supramolecular chirality) plays a significant role in modulating antibacterial performance. Herein, we developed inherent chiral antibacterial hydrogels by modifying the carboxyl groups of our previously reported supramolecular gelator (LPF-left handed phenylalanine gelator and DPF- right handed phenylalanine gelator) with 2-amino-5-methylthiazole (MTZ) and 5-amino-1,3,4-thiadiazole-2- thiol (TDZ). The new L/D-gelator molecules initiate self-assembly to form hydrogels through non-covalent interactions (Hydrogen bonding and π-π interactions) verified by FTIR and CD spectroscopy. Morphological studies of the xerogels revealed left and right-handed chiral nanofibers for the gelators' L-form and D-form, respectively. The resulting hydrogels exhibited inherent antibacterial activity against Gram-positive (Bacillus subtilis, Staphylococcus aureus) and Gram-negative (Pseudomonas aeruginosa) bacteria, with TDZ hydrogels showing more significant antibacterial activity than MTZ hydrogels. Interestingly, the D-form (having right-handed nanofibers) of both hydrogels (MTZ and TDZ) exhibited higher antibacterial activities compared with the left-handed nanofibrous hydrogels (L-form) attributed to the stereoselective interaction of the chiral helical nanofiber. Moreover, the amplification of chirality moving from a molecular to a supramolecular level essentially improved the antibacterial action. Our results provide deep insight into the development of unique supramolecular chiral antimicrobial agents and hint at the potentiality of right-handed nanofibers (D-form) having enhanced antibacterial activity. STATEMENT OF SIGNIFICANCE: Chiral stereochemistry plays a significant role in many biological processes, which determines the interaction of bacteria cells with chiral biomolecules. The interaction between bacteria and material surface (molecular chirality or supramolecular chirality) plays a significant role in modulating antibacterial performance. Here, we deigned and synthesized unique inherent biocompatible supramolecular chiral hydrogel. From this study we concluded that the D-form (having right-handed nanofibers) of hydrogels exhibited higher antibacterial activities compared with the left-handed nanofibrous hydrogels (L-form) attributed to the stereoselective interaction of the chiral helical nanofiber. Additionally, this study also explored the amplification of chirality moving from a molecular to a supramolecular level essentially improved the antibacterial action.

Antibacterial Copolypeptoids with Potent Activity against Drug Resistant Bacteria and Biofilms, Excellent Stability, and Recycling Property

The preparation of a type of innovative cationic copolypeptoid antimicrobials containing various hydrophobic moieties that resemble both structure and membrane-lytic antibacterial mechanism of natural antimicrobial peptides (AMPs) is reported. By finely tuning the hydrophilic/hydrophobic balance, the polypeptoids exhibit a wide spectrum of antibacterial activity against both Gram-positive bacteria and Gram-negative bacteria with the lowest minimum inhibitory concentration (MIC) at only 2 µg mL^-1 , whereas they also show low haemolytic properties. In particular, high selectivity (>128) is achieved from the polymers with butyl moieties. Moreover, the polypeptoids can readily inhibit the formation of biofilms and effectively eradicate the bacteria embedded in the mature biofilms, which is superior to many natural AMPs and vancomycin. Unlike conventional antibiotics, the polypeptoids possess potent activity against drug-resistant bacteria without visible resistance development after repeated usage. Notably, the polypeptoid antimicrobials not only have inherently fast bactericidal properties and excellent stability against incubation with human plasma, but also show excellent in vivo antibacterial effect. The prepared antimicrobials, coated onto magnetic nanospheres show recycling properties and enhanced antibacterial activity as combined with near-infrared (NIR)-induced photothermal antibacterial therapy.

Amphiphilic quaternized chitosan: Synthesis, characterization, and anti-cariogenic biofilm property

Hydrophobized chitosan derivatives, hexyl chitosan (HCS), dodecyl chitosan (DCS), and phthaloyl chitosan (PhCS) of approximately 30 and 50% degree of substitution (%DS) reacted with glycidyltrimethylammonium chloride (GTMAC) to incorporate hydrophilic positively charged groups of N-[(2-hydroxyl-3-trimethylammonium)propyl] and yielded amphiphilic quaternized chitosan derivatives. They can assemble into spherical nanoparticles with a hydrodynamic diameter of ~100-300 nm and positive ζ-potential values (+15 to +56). Their anti-biofilm efficacy was evaluated against the dental caries pathogen, Streptococcus mutans. Among all derivatives, the one having 30%DS of hexyl group and prepared by reacting with 1 mol equivalent of GTMAC (H₃₀CS-GTMAC) showed the best performance in terms of its aqueous solubility, the lowest minimum inhibitory concentration (138 μg/mL) and the minimum bactericidal concentration (275 μg/mL) which are superior to the unmodified chitosan. Its equivalent anti-biofilm efficacy to that of chlorhexidine suggests that it can be a greener antibacterial agent for oral care formulations.

Polyaspartate-derived Synthetic Antimicrobial Polymer Enhances Activity of Rifampicin against Multi-drug Resistant Pseudomonas aeruginosa Infections

Infections caused by multi-drug resistant Pseudomonas aeruginosa (P. aeruginosa) face major challenges for treatment due to acquired, adaptive, and intrinsic resistance developed by bacteria due to accumulation of mutations, ability...

SuFEx modification of silk fibroin silicon aerogel and its adsorption behavior and antibacterial performance

A silk fibroin silicon-based composite aerogel (SSA) has been modified via a SuFEx reaction for application in the adsorption of anionic pollutants and antimicrobials in water. The tyrosine fragment in the silk fibroin was modified by a high yielding SuFEx click reaction. A quaternary ammonium salt functionality was introduced into the silk fibroin protein and the modified silk fibroin protein was crosslinked with tetraethyl orthosilicate. The aerogel was then prepared by freeze-drying. The aerogel obtained has biocompatibility and biodegradability properties. Four types of dyes (Methyl orange, Rhodamine B, Methylene blue and Acid red) were applied as targets and the saturated adsorption amounts were calculated. The adsorption behavior of the dyes towards SSA was studied by fitting Langmuir and Freundlich adsorption models. A pseudo-first order kinetic model and a pseudo-second order kinetic model were used to study the kinetics of the adsorption process. After 6 cycles, the removal rate of methyl orange by SSA remained at 81.25%. The adsorption capacity and anti-interference ability of SSA on some other polluting anions such as PO₄^3- and CrO₄^2- were also measured and the efficiency adsorption reached up to 70.94% and 77.91%, respectively. The antibacterial effect of SSA was evaluated with Escherichia coli and Staphylococcus aureus as representative examples.

Combination of vancomycin and guanidinium-functionalized helical polymers for synergistic antibacterial activity and biofilm ablation

The emergence of various resistant bacteria and overuse of antibiotics have led to severe side effects. Therefore, developing efficient and safe antibacterial systems is important. Herein, well-defined antimicrobial material–helical poly(phenyl guanidinium isocyanide) block copolymers with different conformations (l-P3-van, d-P3-van, and dl-P3-van) that connect vancomycin (van) to the polymer through a disulfide bond were synthesized. The prepared antimicrobial materials exhibit broad-spectrum antimicrobial activity, low bacterial resistance, and good proteolytic stability. They also overcome the intrinsic resistance of Gram-negative bacteria to van with a 100-fold increase in antimicrobial activity. Interestingly, the conformation of the material promotes its antimicrobial activity. The left-handed helix conformation shows five-fold more antimicrobial activity than the right-handed helical conformation, thereby opening a path for the application of nanochirality in the field of antibiotics.

Helical poly(phenyl isocyanide)-based antibacterial materials have been developed, which have a broad antibacterial spectrum and high antibacterial activity and can effectively destroy preformed biofilms.

Self-assembled nanoparticles containing photosensitizer and polycationic brush for synergistic photothermal and photodynamic therapy against periodontitis

Background

Periodontitis is a chronic inflammatory disease in oral cavity owing to bacterial infection. Photothermal therapy (PTT) and photodynamic therapy (PDT) have many advantages for antibacterial treatment. As an excellent photosensitizer, indocyanine green (ICG) shows prominent photothermal and photodynamic performances. However, it is difficult to pass through the negatively charged bacterial cell membrane, thus limiting its antibacterial application for periodontitis treatment.

Results

In this work, self-assembled nanoparticles containing ICG and polycationic brush were prepared for synergistic PTT and PDT against periodontitis. First, a star-shaped polycationic brush poly(2-(dimethylamino)ethyl methacrylate) (sPDMA) was synthesized via atom transfer radical polymerization (ATRP) of DMA monomer from bromo-substituted β-cyclodextrin initiator (CD-Br). Next, ICG was assembled with sPDMA to prepare ICG-loaded sPDMA (sPDMA@ICG) nanoparticles (NPs) and the physicochemical properties of these NPs were characterized systematically. In vitro antibacterial effects of sPDMA@ICG NPs were investigated in porphyromonas gingivalis (Pg), one of the recognized periodontitis pathogens. A ligature-induced periodontitis model was established in Sprague–Dawley rats for in vivo evaluation of anti-periodontitis effects of sPDMA@ICG NPs. Benefiting from the unique brush-shaped architecture of sPDMA polycation, sPDMA@ICG NPs significantly promoted the adsorption and penetration of ICG into the bacterial cells and showed excellent PTT and PDT performances. Both in vitro and in vivo, sPDMA@ICG NPs exerted antibacterial and anti-periodontitis actions via synergistic PTT and PDT.

Conclusions

A self-assembled nanosystem containing ICG and polycationic brush has shown promising clinical application for synergistic PTT and PDT against periodontitis.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-021-01114-w.

Silica-supported near-infrared carbon dots and bicarbonate nanoplatform for triple synergistic sterilization and wound healing promotion therapy

Widespread bacterial infection and the emergence of antibiotic resistance exhibit an increasing threat to public health. Additionally, chronic wounds caused by bacterial infection have become a major challenge and threat in medical. Therefore, it is of great significance to explore effective and safe nanomaterials which possess antibacterial and wound healing promotion performance. Herein, we developed silica-supported near-infrared carbon dots (QPCuRC@MSiO₂) and bicarbonate (BC) nanoplatform (BC/QPCuRC@MSiO₂@PDA), which possess triple synergistic antibacterial including quaternary ammonium compounds (QACs), photothermal therapy (PTT), and photodynamic therapy (PDT). Meanwhile, the nanoplatform realized the controlled release of CO₂ in situ triggered by 808 nm laser irradiation for wound healing. In vitro and in vivo antibacterial assays displayed that the BC/QPCuRC@MSiO₂@PDA possess excellent antibacterial property, the antibacterial rate up to 99.6% and 99.99% to Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), respectively. Wound healing evaluation proved that suitable release of CO₂ could promote the process of infected wound healing, and the wound healing rate up to 100% after treatment for 14 days. Additionally, the cellular imaging experiment revealed that the BC/QPCuRC@MSiO₂@PDA could be considered as fluorescence probe. Together, these results demonstrated that the BC/QPCuRC@MSiO₂@PDA have great potential in biomedical field.

High Antibacterial Activity and Selectivity of the Versatile Polysulfoniums that Combat Drug Resistance

Sulfonium-ion-containing polymers exhibit significant potential benefits for various applications. An efficient strategy to synthesize a type of antibacterial sulfonium-ion-bearing polypeptoids via a combination of ring-opening polymerization and a post-polymerization functionalization with various functional epoxides is presented. A systematic investigation is further performed in order to explore the influence of the overall hydrophobic/hydrophilic balance on the antimicrobial activity and selectivity of the prepared polysulfoniums. Notably, those chlorepoxypropane-modified polysulfoniums with an optimized amphiphilic balance show higher selectivity toward both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus, than to red blood cells. The polymers also show great efficiency in inhibiting S. aureus biofilm formations, as well as in further eradicating the mature biofilms. Remarkably, negligible antibacterial resistance and cross-resistance to commercial antibiotics is shown in these polymers. The polysulfoniums further show their potent in vivo antimicrobial efficacy in a multidrug-resistant S. aureus infection model that is developed on mouse skin. Similar to the antimicrobial peptides, the polysulfoniums are demonstrated to kill bacteria through membrane disruption. The obtained polypeptoid sulfoniums, with high selectivity and potent antibacterial property, are excellent candidates for antibacterial treatment and open up new possibilities for the preparation of a class of innovative antimicrobials.

Biological Synergy and Antimicrobial Mechanism of Hydroxypropyltrimethyl Ammonium Chloride Chitosan with Benzalkonium Chloride

Preservatives in eye drops have always been the focus of people's attention. Benzalkonium chloride (BAC) is one of the most frequently used bacteriostatic agents in eye drops, which has broad-spectrum and efficient bactericidal ability. However, the inappropriate dosage of BAC may lead to high cytotoxicity. Therefore, adding low-toxic hydroxypropyltrimethyl ammonium chloride chitosan (HACC) can not only achieve antimicrobial effect, but also have the advantages of moisturizing and biocompatibility. In this paper, the minimum inhibitory concentrations (MICs) of HACC and BAC were evaluated against Escherichia coli, Staphylococcus aureus, Staphylococcus epidermidis, Diphtheroid bacillus and Candida albicans. Based on the MIC of each antimicrobial agent, an antimicrobial assay was performed to investigate the antimicrobial ability of disinfectant solution. Besides, cytotoxicity had also been assessed. When the HACC/BAC solution at weight ratio of 150/1 showed a highest antimicrobial efficiency and the cell proliferation rates were the highest in 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assays. Furthermore, the cell leakage was examined by UV absorption, indicating the great synergistic antimicrobial effect between HACC and BAC. What is more, the results of micromorphology research suggested that as the result of repulsive force between the two molecules, the average particle size of HACC would decrease. Finally, the impedance experiment showed that with the addition of BAC, current density would increase significantly, suggesting that more positive charge group was exposed to aqueous solution, leading the the increase of antimicrobial ability. Based on these results, HACC-BAC combination solution might be a promising novel antimicrobial group for biomedical applications.

A pH/H2O2 dual triggered nanoplatform for enhanced photodynamic antibacterial efficiency

Bacterial infection and biofilms cause non-healing chronic wounds and threaten human health. Although antibiotics still play an irreplaceable role to treat infectious diseases in clinics, increasing attention has been paid to the problem of multidrug resistance (MDR). As a novel strategy to deal with bacterial infection, photodynamic antimicrobial therapy (PDAT) has shown promising potential to reduce bacterial infection, and stimuli-responsive nanomaterials have been shown to enhance the antibacterial efficiency and postpone the emergence of drug-resistant bacteria. In this work, we developed a bacterial microenvironment-responsive nanoplatform to eliminate bacteria and bacterial biofilms under 650 nm laser irradiation. Reversible addition-fragmentation chain transfer (RAFT) polymerization was applied to synthesize an H2O2 responsive block copolymer of POEGMA-b-PBMA, and the antibacterial drug of porphyrin TAPP was loaded to form nanoparticles (PT) by a co-assembled approach. At the infection area with overexpressed peroxide, nanoparticles were disintegrated due to the cleaved boronic ester leading to the release of TAPP. Furthermore, the released TAPP became protonated in the acidic infection area (pH = 5.5) and then enhanced its photodynamic antibacterial efficacy by producing higher singlet oxygen (1O2) levels under light irradiation. Both in vitro and in vivo antimicrobial and biofilm elimination experiments demonstrated that the responsive nanoplatform combined with PDAT has tremendous potential for the treatment of infections.