Charge-Free, Stabilizing Amide-π Interactions Can Be Used to Control Collagen Triple-Helix Self-Assembly

Multi-acrylamides improve bond stability through collagen reinforcement under physiological conditions

OBJECTIVES

Acrylamides were shown to significantly improve bonding stability in adhesive restorations, but the reinforcement mechanism has not been fully elucidated. We tested the hypothesis that hydrogen bonding reinforcement of the collagen network (with secondary or tertiary acrylamides), as well as degree of crosslinking of the polymer network (with di- or tri-functional acrylamides), can be two of the factors at play.

METHODS

Two-step total etch adhesives comprising UDMA (60 wt%) and 40 wt% of: TAAEA, TMAAEA (secondary, tertiary tri-acrylamides), BAAP, DEBAAP (secondary, tertiary di-acrylamides) or HEMA (mono-methacrylate - control) were formulated. Simulated composite restorations (n = 5) were tested after cyclic mechanical and biological (S. mutans biofilm) challenges. Gap formation before and after aging was assessed with SEM imaging. Micro-tensile bond strength (μTBS, n = 6) was assessed after seven-day incubation in water or S. mutans-containing culture medium. Collagen reinforcement was assessed with hydroxyproline assay (n = 10) and rheology (n = 3). Data were analyzed with one-way/two-way ANOVA/Tukey's test (alpha=5%).

RESULTS

Gap formation increased and bond strength decreased for all monomers after biofilm incubation (p < 0.001). Except for DEBAAP, secondary and tertiary di/tri-acrylamides showed lower occlusal gap width values, but no significant differences overall gap length compared to HEMA. μTBS increased for tri-acrylamides compared with HEMA. Samples treated with multi-acrylamides had lower concentration of hydroxyproline (by-product of collagen degradation) (p < 0.001), except for DEBAAP, which showed values close to HEMA (p > 0.05). Dentin shear modulus increased for all acrylamides after 72 h, especially TMAAEA.

SIGNIFICANCE

In general, multi-acrylamides promote collagen reinforcement, leading to reduced gap formation, and stabilize the bond strength under physiological conditions.

Versatile triblock peptides mimicking ABC-type heterotrimeric collagen with stabilizing salt bridges

Type IV collagen, a principal constituent of basement membranes, consists of six distinct α chains that assemble into both ABC and AAB-type heterotrimers. While collagen-like peptides have been investigated for heterotrimer formation, the construction of ABC-type heterotrimeric collagen mimetic peptides remains a formidable challenge, primarily due to the intricate composition and arrangement of the chains. We have herein for the first time reported the development of a versatile triblock peptide system to mimic ABC-type heterotrimeric collagen stabilized by salt bridges. The triblock peptides A, B, and C incorporate functional natural type IV collagen sequences in the center, along with charged amino acids at their N and C-terminals. By leveraging electrostatic repulsion at these charged termini, the formation of homotrimers is effectively inhibited, while stable ABC-type heterotrimers are generated through the establishment of salt bridges between oppositely charged terminals. Circular dichroism (CD) spectroscopy demonstrated that peptides A, B, and C existed as individual monomers, while they effectively formed stable ABC-type heterotrimers upon being mixed at a molar ratio of 1:1:1. Additionally, fluorescence quenching results indicated that fluorescence-labeled peptides A', B', and C' formed ABC-type heterotrimer, exhibiting comparable thermal stability as determined by CD spectroscopy. Molecular dynamics simulations elucidated the role of salt bridges between arginine and aspartic acid residues at N- and C-terminals in maintaining a unique chain register in the ABC-type heterotrimers. These triblock peptides offer a robust approach for replicating the structural and functional characteristics of type IV collagen, with promising applications in elucidating the biological roles and pathologies associated with heterotrimeric collagen.

Mechanistic study of the stabilization of dentin-bonded restorative interfaces via collagen reinforcement by multi-acrylamides

Hydrolytically and enzymatically-stable multi-acrylamides have been proposed to increase the long-term durability of dental adhesive interfaces as alternatives to methacrylates. The aim of this study was to investigate the mechanical and biochemical properties of experimental adhesives containing multi-functional acrylamides concerning collagen reinforcement and metalloproteinases (MMP) activity. Multi-functional acrylamides, TMAAEA (Tris[(2-methylaminoacryl) ethylamine) and DEBAAP (N,N-Diethyl-1,3-bis(acrylamido) propane), along with the commercially available DMAM (N,N-dimethylacrylamide) (monofunctional acrylamide) and HEMA (2-Hydroxyethyl methacrylate) (monofunctional methacrylate - control) were tested for stability against enzymatic hydrolysis by cholesterol esterase/pseudocholinesterase (PC/PCE) solutions for up to 30 days. Collagen-derived substrate and gelatin zymography were performed to examine the effect of the compounds on the biological activity of human recombinant and dentin-extracted gelatinases MMP-2 and MMP-9. In situ zymography was carried out by fluorescent collagen degradation combined with confocal microscopy analysis. Hydroxyproline content was measured in collagen derived from dentin extracts though reaction with Ehrlich's reagent p-dimethylaminobenzaldehyde (DMAB), generating a stable chromophore measured at 550 nm. Storage shear modulus of demineralized dentin discs treated with the tested compounds was measured by oscillatory rheometry, in order to investigate potential collagen reinforcement. FT-IR was performed to determine qualitative differences in collagen based on observed changes in amide bands. The results were analyzed by ANOVA/Tukey's test (α = 0.05). Multi-acrylamides survived 30 days of incubation in cholinesterase/pseudo-cholinesterase (PC/PCE) solutions, while HEMA showed approximately 70 % overall degradation. Incubation with multi-acrylamides reduced collagen degradation as evidenced by the reduced hydroxyproline levels and by the 30 % increase inshear storage modulus. Biochemical and zymography assays showed no noticeable inhibition of recombinant and extracted MMPs enzymatic activity. The infra-red spectroscopy results for multi-functional acrylamides treated samples demonstrated shifts of the amide II bonds and marked increase in intensity of the bands 1200 cm-1, which may indicate partial collagen denaturation and some degree of cross-linking of the compounds with collagen, respectively. The multi-acrylamides exhibited not only comparable mechanical properties but also demonstrated significantly enhanced biochemical stability when compared to the widely used methacrylate control. Clinical relevance: These findings highlight the potential of multi-acrylamides to increase the bonding stability to tissues and, ultimately, contribute to the longevity of dental restorations.

Collagen Mimicry with a Short Collagen Model Peptide

Mimicking triple helix and fibrillar network of collagen through collagen model peptide(CMP) with short GPO tripeptide repeats is a great challenge. Herein, a minimalistic CMP comprising only five GPO repeats [(GPO)5 ] is presented. This novel approach involves the fusion of ultrashort peptide with the synergetic power of π-system and β-sheet formation to short CMP (GPO)5 . Accordingly, a hydrogel-forming, fluorenylmethoxycarbonyl (Fmoc)-functionalized ultrashort peptide (NFGAIL) is fused at the N-terminus and phenylalanine at the C-terminus of (GPO)5 (Fmoc-NFGAIL-(GPO)5 -F-COOH, FmP-5GPO). At room temperature, it forms a robust triple helix in aqueous buffer solution and has a relatively high melting point of 35 °C. The fluorenyl motif stabilizes the triple helix by aromatic π-π interactions as in its absence, triple helix is not formed. NFGAIL, which forms a β-sheet, also aids in triple helix stabilization via intermolecular hydrogen bonding and hydrophobic interactions. FmP-5GPO forms highly entangled nanofibrils with a micrometer length, which have excellent cell viability. The achievement of stable triple helix and fibrils in such a short CMP(FmP-5GPO) sequence is a challenging feat, and its significance in CMP-based biomaterials is undeniable. The present strategy highlights the potential for developing new CMP sequences through intelligent tuning of fusion peptides and GPO repeats.

Self-Sorting Collagen Heterotrimers

Nature uses elaborate methods to control protein assembly, including that of heterotrimeric collagen. Here, we established design principles for the composition and register-selective assembly of synthetic collagen heterotrimers. The assembly code enabled the self-sorting of eight different strands into three─out of 512 possible─triple helices via complementary (4S)-aminoproline and aspartate residues. Native ESI-MS corroborated the specific assembly into coexisting heterotrimers.

Spatiotemporal Immunomodulation and Biphasic Osteo-Vascular Aligned Electrospun Membrane for Diabetic Periosteum Regeneration

Under diabetic conditions, blood glucose fluctuations and exacerbated immunopathological inflammatory environments pose significant challenges to periosteal regenerative repair strategies. Responsive immune regulation in damaged tissues is critical for the immune microenvironment, osteogenesis, and angiogenesis stabilization. Considering the high-glucose microenvironment of such acute injury sites, a functional glucose-responsive immunomodulation-assisted periosteal regeneration composite material-PLA（Polylactic Acid）/COLI(Collagen I）/Lipo(Liposome）-APY29 (PCLA)-is constructed. Aside from stimulating osteogenic differentiation, owing to the presence of surface self-assembled type I collagen in the scaffolds, PCLA can directly respond to focal area high-glucose microenvironments. The PCLA scaffolds trigger the release of APY29-loaded liposomes, shifting the macrophages toward the M2 phenotype, inhibiting the release of inflammatory cytokines, improving the bone immune microenvironment, and promoting osteogenic differentiation and angiogenesis. Bioinformatics analyses show that PCLA enhances bone repair by inhibiting the inflammatory signal pathway regulating the polarization direction and promoting osteogenic and angiogenic gene expression. In the calvarial periosteal defect model of diabetic rats, PCLA scaffolds induce M2 macrophage polarization and improve the inflammatory microenvironment, significantly accelerating periosteal repair. Overall, the PCLA scaffold material regulates immunity in fluctuating high-glucose inflammatory microenvironments, achieves relatively stable and favorable osteogenic microenvironments, and facilitates the effective design of functionalized biomaterials for bone regeneration therapy in patients with diabetes.

Hollow Octadecameric Self-Assembly of Collagen-like Peptides

The folding of collagen is a hierarchical process that starts with three peptides associating into the characteristic triple helical fold. Depending on the specific collagen in question, these triple helices then assemble into bundles reminiscent of α-helical coiled-coils. Unlike α-helices, however, the bundling of collagen triple helices is very poorly understood with almost no direct experimental data available. In order to shed light on this critical step of collagen hierarchical assembly, we have examined the collagenous region of complement component 1q. Thirteen synthetic peptides were prepared to dissect the critical regions allowing for its octadecameric self-assembly. We find that short peptides (under 40 amino acids) are able to self-assemble into specific (ABC)6 octadecamers. This requires the ABC heterotrimeric composition as the self-assembly subunit, but does not require disulfide bonds. Self-assembly into this octadecamer is aided by short noncollagenous sequences at the N-terminus, although they are not entirely required. The mechanism of self-assembly appears to begin with the very slow formation of the ABC heterotrimeric helix, followed by rapid bundling of triple helices into progressively larger oligomers, terminating in the formation of the (ABC)6 octadecamer. Cryo-electron microscopy reveals the (ABC)6 assembly as a remarkable, hollow, crown-like structure with an open channel approximately 18 Å at the narrow end and 30 Å at the wide end. This work helps to illuminate the structure and assembly mechanism of a critical protein in the innate immune system and lays the groundwork for the de novo design of higher order collagen mimetic peptide assemblies.

Dentin primer based on a highly functionalized gelatin-methacryloyl hydrogel

Gelatin-methacryloyl hydrogels (GelMA) have demonstrated their utility as scaffolds in a variety of tissue engineering applications.

OBJECTIVES

In this study, a highly functionalized GelMA hydrogel was synthesized and assessed for degree of functionalization. As the proposed GelMA hydrogel was coupled to a visible-light photoinitiator, we hypothesized it might serve as base to formulate a model dentin primer for application in restorative dentistry.

METHODS

GelMA was mixed with photoinitiator lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP), photopolymerized for 0-40 s using a dental light-curing device and tested for extrudability, degree of photo-crosslinking (DPxlink), water sorption/solubility/swelling (WS/SL/SW) and apparent modulus of elasticity (AE). Model dentin primer was prepared by mixing GelMA+LAP with a primer of a commercial three-step etch-and-rinse adhesive. After application of GelMA-based primer to acid-etched dentin, samples were bonded with correspondent adhesive agent, photopolymerized and had their immediate bond strength compared to control samples primed and bonded with the same commercial material.

RESULTS

Extrudability of hydrogel was confirmed using a microsyringe to write the acronym "CDMI". DPxlink of GelMA+LAP changed significantly as a function of photopolymerization time (20 s < 30 s ≤ 40 s). WS, SL and SW were significantly reduced in hydrogels polymerized for 30 and 40 s. AE of hydrogels varied significantly as a function of photopolymerization time (20 s < 30 s ≤ 40 s; 20 s ‡ 40 s). Bond strength of dentin primed with GelMA-based primer was lower (∼29.3 MPa) but not significantly of that of control (∼34.6 MPa).

CONCLUSIONS

Optimization of a GelMA-based dentin primers can lead to the development of promising biomimetic adhesives for dentin rehabilitation.

Predicting Collagen Triple Helix Stability through Additive Effects of Terminal Residues and Caps

Collagen model peptides (CMPs) consisting of proline-(2S,4R)-hydroxyproline-glycine (POG) repeats have provided a breadth of knowledge of the triple helical structure of collagen, the most abundant protein in mammals. Predictive tools for triple helix stability have, however, lagged behind since the effect of CMPs with different frames ([POG]_n , [OGP]_n , or [GPO]_n ) and capped or uncapped termini have so far been underestimated. Here, we elucidated the impact of the frame, terminal functional group and its charge on the stability of collagen triple helices. Combined experimental and theoretical studies with frame-shifted, capped and uncapped CMPs revealed that electrostatic interactions, strand preorganization, interstrand H-bonding, and steric repulsion at the termini contribute to triple helix stability. We show that these individual contributions are additive and allow for the prediction of the melting temperatures of CMP trimers.

Characterization of recombinant humanized collagen type III and its influence on cell behavior and phenotype

Collagen made a tremendous impact in the field of regenerative medicine as a bioactive material. For decades, collagen has been used not only as a scaffolding material but also as an active component in regulating cells' biological behavior and phenotype. However, animal-derived collagen as a major source suffered from problems of immunogenicity, risk of viral infection, and the unclear relationship between bioactive sequence and function. Recombinant humanized collagen (rhCol) provided alternatives for regenerative medicine with more controllable risks. However, the characterization of rhCol and the interaction between rhCol and cells still need further investigation, including cell behavior and phenotype. The current study preliminarily demonstrated that recombinant humanized collagen type III (rhCol III) conformed to the theoretical amino acid sequence and had an advanced structure resembling bovine collagen. Furthermore, rhCol III could facilitate basal biological behaviors of human skin fibroblasts, such as adhesion, proliferation and migration. rhCol III was beneficial for some extracellular matrix-expressing cell phenotypes. The study would shed light on the mechanism research of rhCol and cell interactions and further understanding of effectiveness in tissue regeneration.

Graphical abstract

Cation-π Interactions and Their Role in Assembling Collagen Triple Helices

Cation-π interactions play a significant role in the stabilization of globular proteins. However, their role in collagen triple helices is less well understood and they have rarely been used in de novo designed collagen mimetic systems. In this study, we analyze the stabilizing and destabilizing effects in pairwise amino acid interactions between cationic and aromatic residues in both axial and lateral sequential relationships. Thermal unfolding experiments demonstrated that only axial pairs are stabilizing, while the lateral pairs are uniformly destabilizing. Molecular dynamics simulations show that pairs with an axial relationship can achieve a near-ideal interaction distance, but pairs in a lateral relationship do not. Arginine-π systems were found to be more stabilizing than lysine-π and histidine-π. Arginine-π interactions were then studied in more chemically diverse ABC-type heterotrimeric helices, where arginine-tyrosine pairs were found to form the best helix. This work helps elucidate the role of cation-π interactions in triple helices and illustrates their utility in designing collagen mimetic peptides.

CollagenTransformer: End-to-End Transformer Model to Predict Thermal Stability of Collagen Triple Helices Using an NLP Approach

Collagen is one of the most important structural proteins in biology, and its structural hierarchy plays a crucial role in many mechanically important biomaterials. Here, we demonstrate how transformer models can be used to predict, directly from the primary amino acid sequence, the thermal stability of collagen triple helices, measured via the melting temperature T_m. We report two distinct transformer architectures to compare performance. First, we train a small transformer model from scratch, using our collagen data set featuring only 633 sequence-to-T_m pairings. Second, we use a large pretrained transformer model, ProtBERT, and fine-tune it for a particular downstream task by utilizing sequence-to-T_m pairings, using a deep convolutional network to translate natural language processing BERT embeddings into required features. Both the small transformer model and the fine-tuned ProtBERT model have similar R² values of test data (R² = 0.84 vs 0.79, respectively), but the ProtBERT is a much larger pretrained model that may not always be applicable for other biological or biomaterials questions. Specifically, we show that the small transformer model requires only 0.026% of the number of parameters compared to the much larger model but reaches almost the same accuracy for the test set. We compare the performance of both models against 71 newly published sequences for which T_m has been obtained as a validation set and find reasonable agreement, with ProtBERT outperforming the small transformer model. The results presented here are, to our best knowledge, the first demonstration of the use of transformer models for relatively small data sets and for the prediction of specific biophysical properties of interest. We anticipate that the work presented here serves as a starting point for transformer models to be applied to other biophysical problems.

Biomaterial functionalization with triple-helical peptides for tissue engineering

In the growing field of tissue engineering, providing cells in biomaterials with the adequate biological cues represents an increasingly important challenge. Yet, biomaterials with excellent mechanical properties often are often biologically inert to many cell types. To address this issue, researchers resort to functionalization, i.e. the surface modification of a biomaterial with active molecules or substances. Functionalization notably aims to replicate the native cellular microenvironment provided by the extracellular matrix, and in particular by collagen, its major component. As our understanding of biological processes regulating cell behaviour increases, functionalization with biomolecules binding cell surface receptors constitutes a promising strategy. Amongst these, triple-helical peptides (THPs) that reproduce the architectural and biological properties of collagen are especially attractive. Indeed, THPs containing binding sites from the native collagen sequence have successfully been used to guide cell response by establishing cell-biomaterial interactions. Notably, the GFOGER motif recognising the collagen-binding integrins is extensively employed as a cell adhesive peptide. In biomaterials, THPs efficiently improved cell adhesion, differentiation and function on biomaterials designed for tissue repair (especially for bone, cartilage, tendon and heart), vascular graft fabrication, wound dressing, drug delivery or immunomodulation. This review describes the key characteristics of THPs, their effect on cells when combined to biomaterials and their strong potential as biomimetic tools for regenerative medicine. STATEMENT OF SIGNIFICANCE: This review article describes how triple-helical peptides constitute efficient tools to improve cell-biomaterial interactions in tissue engineering. Triple helical peptides are bioactive molecules that mimic the architectural and biological properties of collagen. They have been successfully used to specifically recognize cell-surface receptors and provide cells seeded on biomaterials with controlled biological cues. Functionalization with triple-helical peptides has enabled researchers to improve cell function for regenerative medicine applications, such as tissue repair. However, despite encouraging results, this approach remains limited and under-exploited, and most functionalization strategies reported in the literature rely on biomolecules that are unable to address collagen-binding receptors. This review will assist researchers in selecting the correct tools to functionalize biomaterials in efforts to guide cellular response.

Covalent Capture of a Collagen Mimetic Peptide with an Integrin-Binding Motif

Collagen mimetic peptides (CMPs) are an excellent model to study the structural and biological properties of the extracellular matrix (ECM) due to ease of synthesis and variability in sequence. To ensure that synthetic materials accurately mimic the structure and function of natural collagen in the ECM, it is necessary to conserve the triple helix. However, CMP folding is subject to equilibrium, and frequently peptides exist in solution as both monomer and triple helix. Additionally, the stability of CMPs is highly dependent on peptide length and amino acid composition, leading to suboptimal performance. Here, we report the utility of covalent capture, a method to (a) direct the folding of a supramolecular triple helix and (b) form isopeptide bonds between the helix strands, in the design of an integrin-binding peptide with a GFOGER motif. Covalent capture effectively locked the triple helix and yielded a peptide with high thermal stability and a rapid folding rate. Compared to supramolecular triple helices bearing the same GFOGER-binding site, cell adhesion was substantially increased. In vitro assays using EDTA/Mg²⁺ and an anti-α2β1 antibody demonstrated the preservation of the high specificity of the binding event. This covalently captured integrin-binding peptide provides a template for the future design of bioactive ECM mimics, which can overcome limitations of supramolecular approaches for potential drug and biomaterial designs.

Recent Advances in Collagen Mimetic Peptide Structure and Design

Collagen mimetic peptides (CMPs) fold into a polyproline type II triple helix, allowing the study of the structure and function (or misfunction) of the collagen family of proteins. This Perspective will focus on recent developments in the use of CMPs toward understanding the structure and controlling the stability of the triple helix. Triple helix assembly is influenced by various factors, including the single amino acid propensity for the triple helix fold, pairwise interactions between these amino acids, and long-range effects observed across the helix, such as bend, twist, and fraying. Important progress in creating a comprehensive and predictive understanding of these factors for peptides with exclusively natural amino acids has been made. In contrast, several groups have successfully developed unnatural amino acids that are engineered to stabilize the triple helical structure. A third approach to controlling the triple helical structure includes covalent cross-linking of the triple helix to stabilize the assembly, which eliminates the problematic equilibrium of unfolding into monomers and enforces compositional control. Advances in all these areas have resulted in significant improvements to our understanding and control of this important class of protein, allowing for the design and application of more chemically complex and well-controlled collagen mimetic biomaterials.

Protein Based Biomaterials for Therapeutic and Diagnostic Applications

Proteins are some of the most versatile and studied macromolecules with extensive biomedical applications. The natural and biological origin of proteins offer such materials several advantages over their synthetic counterparts, such as innate bioactivity, recognition by cells and reduced immunogenic potential. Furthermore, proteins can be easily functionalized by altering their primary amino acid sequence and can often be further self-assembled into higher order structures either spontaneously or under specific environmental conditions. This review will feature the recent advances in protein-based biomaterials in the delivery of therapeutic cargo such as small molecules, genetic material, proteins, and cells. First, we will discuss the ways in which secondary structural motifs, the building blocks of more complex proteins, have unique properties that enable them to be useful for therapeutic delivery. Next, supramolecular assemblies, such as fibers, nanoparticles, and hydrogels, made from these building blocks that are engineered to behave in a cohesive manner, are discussed. Finally, we will cover additional modifications to protein materials that impart environmental responsiveness to materials. This includes the emerging field of protein molecular robots, and relatedly, protein-based theranostic materials that combine therapeutic potential with modern imaging modalities, including near-infrared fluorescence spectroscopy (NIRF), single-photo emission computed tomography/computed tomography (SPECT/CT), positron emission tomography (PET), magnetic resonance imaging (MRI), and ultrasound/photoacoustic imaging (US/PAI).