Next Generation Hemostatic Materials Based on NHS-Ester Functionalized Poly(2-oxazoline)s

Haemostatic potency of sodium alginate/aloe vera/sericin composite scaffolds - preparation, characterisation, and evaluation

Fabrication of haemostatic materials with excellent antimicrobial, biocompatible and biodegradable properties remains as a major challenge in the field of medicine. Haemostatic agents play vital role in protecting patients and military individuals during emergency situations. Natural polymers serve as promising materials for fabricating haemostatic compounds due to their efficacy in promoting hemostasis and wound healing. In the present work, sodium alginate/aloe vera/sericin (SA/AV/S) scaffold has been fabricated using a simple cost-effective casting method. The prepared SA/AV/S scaffolds were characterised for their physicochemical properties such as scanning electron microscope, UV-visible spectroscopy and Fourier transform infra-red spectroscopy. SA/AV/S scaffold showed good mechanical strength, swelling behaviour and antibacterial activity. In vitro experiments using erythrocytes proved the hemocompatible and biocompatible features of SA/AV/S scaffold. In vitro blood clotting assay performed using human blood demonstrated the haemostatic and blood absorption properties of SA/AV/S scaffold. Scratch wound assay was performed to study the wound healing efficacy of prepared scaffolds. Chick embryo chorioallantoic membrane assay carried out using fertilised embryos proved the angiogenic property of SA/AV/S scaffold. Thus, SA/AV/S scaffold could serve as a potential haemostatic healthcare product due to its outstanding haemostatic, antimicrobial, hemocompatible, biocompatible and angiogenic properties.

Proof-of-principle of a lung sealant based on functionalized polyoxazolines: experiments in an ovine acute aerostasis model

OBJECTIVES

More effective lung sealants are needed to prevent prolonged pulmonary air leakage (AL). Polyoxazoline-impregnated gelatin patch (N-hydroxysuccinimide ester functionalized poly(2-oxazoline)s; NHS-POx) was promising for lung sealing ex vivo. The aim of this study is to confirm sealing effectiveness in an in vivo model of lung injury.

METHODS

An acute aerostasis model was used in healthy adult female sheep, involving bilateral thoracotomy, amputation lesions (bronchioles Ø > 1.5 mm), sealant application, digital chest tube for monitoring AL, spontaneous ventilation, obduction and bursting pressure measurement. Two experiments were performed: (i) 3 sheep with 2 lesions per lung (N = 4 NHS-POx double-layer, N = 4 NHS-POx single-layer, N = 4 untreated) and (ii) 3 with 1 lesion per lung (N = 3 NHS-POx single-layer, N = 3 untreated). In pooled linear regression, AL was analysed per lung (N = 7 NHS-POx, N = 5 untreated) and bursting pressure per lesion (N = 11 NHS-POx, N = 7 untreated).

RESULTS

Baseline AL was similar between groups (mean 1.38-1.47 l/min, P = 0.90). NHS-POx achieved sealing in 1 attempt in 8/11 (72.7%) and in 10/11 (90.9%) in >1 attempt. Application failures were only observed on triangular lesions requiring 3 folds around the lung. No influences of methodological variation between experiments was detected in linear regression (P > 0.9). AL over initial 3 h of drainage was significantly reduced for NHS-POx [median: 7 ml/min, length of interquartile range: 333 ml/min] versus untreated lesions (367 ml/min, length of interquartile range: 680 ml/min, P = 0.036). Bursting pressure was higher for NHS-POx (mean: 33, SD: 16 cmH2O) versus untreated lesions (mean: 19, SD: 15 cmH2O, P = 0.081).

CONCLUSIONS

NHS-POx was effective for reducing early AL, and a trend was seen for improvement of bursting strength of the covered defect. Results were affected by application characteristics and lesion geometry.

Clinical Safety and Performance of GATT-Patch for Hemostasis in Minimal to Moderate Bleeding During Open Liver Surgery

INTRODUCTION

Intraoperative blood loss and postoperative hemorrhage affect outcomes after liver resection. GATT-Patch is a new flexible, pliable hemostatic sealant patch comprising fibrous gelatin carrier impregnated with N-hydroxy-succinimide polyoxazoline. We evaluated safety and performance of the GATT-Patch for hemostasis at the liver resection plane.

METHODS

Adult patients undergoing elective open liver surgery were recruited in three centers. GATT-Patch was used for minimal to moderate bleeding at the liver resection plane. The primary endpoint was hemostasis of the first-treated bleeding site at 3 min versus a prespecified performance goal of 65.4%.

RESULTS

Two trial stages were performed: I (n = 8) for initial safety and II (n = 39) as the primary outcome cohort. GATT-Patch was applied in 47 patients on 63 bleeding sites. Median age was 60.0 (range 25-80) years and 70% were male. Most (66%) surgeries were for colorectal cancer metastases. The primary endpoint was met in 38 out of 39 patients (97.4%; 95% confidence interval: 84.6%-99.9%) versus 65.4% (P < 0.001). Of all the 63 bleeding sites, hemostasis was 82.7% at 30, 93.7% at 60, and 96.8% at 180 s. No reoperations for rebleeding or device-related issues occurred.

CONCLUSIONS

When compared to a performance goal derived from state-of-the-art hemostatic agents, GATT-Patch for the treatment of minimal to moderate bleeding during liver surgery successfully and quickly achieved hemostasis with acceptable safety outcomes. (ClinicalTrials.gov Identifier: NCT04819945).

Naturally Derived Injectable Dual-Cross-Linked Adhesive Hydrogel for Acute Hemorrhage Control and Wound Healing

Developing biocompatible injectable hydrogels with high mechanical strength and rapid strong tissue adhesion for hemostatic sealing of uncontrolled bleeding remains a prevailing challenge. Herein, we engineer an injectable and photo-cross-linkable hydrogel based on naturally derived gelatin methacrylate (GelMA) and N-hydroxysuccinimide-modified poly(γ-glutamic acid) (γPGA-NHS). The chemically dual-cross-linked hydrogel rapidly forms after UV light irradiation and covalently bonds to the underlying tissue to provide robust adhesion. We demonstrate a significantly improved hemostatic efficacy of the hydrogel using various injury models in rats compared to the commercially available fibrin glue. Notably, the hydrogel can achieve hemostasis in porcine liver and spleen incision, and femoral artery puncture models. Moreover, the hydrogel is used for sutureless repair of the liver defect in a rat model with a significantly suppressed inflammatory response, enhanced angiogenesis, and superior healing efficacy compared to fibrin glue. Together, this study offers a promising bioadhesive for treating severe bleeding and facilitating wound repair.

Quaternized chitosan/oxidized bacterial cellulose cryogels with shape recovery for noncompressible hemorrhage and wound healing

Management of noncompressible torso hemorrhage is an urgent clinical requirement, desiring biomaterials with rapid hemostasis, anti-infection and excellent resilient properties. In this research, we have prepared a highly resilient cryogel with both hemostatic and antibacterial effects by chemical crosslinking and electrostatic interaction. The network structure crosslinked by quaternized chitosan and genipin was interspersed with oxidized bacterial cellulose after lyophilization. The as-prepared cryogel can quickly return to the original volume when soaking in water or blood. The appropriately sized pores in the cryogel help to absorb blood cells and further activate coagulation, while the quaternary ammonium salt groups on quaternized chitosan inhibit bacterial infections. Both cell and animal experiments showed that the cryogel was hypotoxic and could promote the regeneration of wound tissue. This research provides a new pathway for the preparation of double crosslinking cryogels and offers effective and safe biomaterials for the emergent bleeding management of incompressible wounds.

Pullulan-Graft-Polyoxazoline: Approaches from Chemistry and Physics

An approach to the preparation of pullulan-graft-poly(2-methyl-2-oxazoline)s based on Cu-catalyzed azide-alkyne cycloaddition with polyoxazoline-azide was applied. All of the obtained polymers were characterized through classical molecular hydrodynamic methods and NMR. The formation of graft copolymers was accomplished by oxidative degradation of pullulan chains. Nevertheless, graft copolymers were obtained as uniform products with varied side chain lengths and degrees of substitution.

Non-activated Esters as Reactive Handles in Direct Post-Polymerization Modification

Non-activated esters are prominently featured functional groups in polymer science, as ester functional monomers display great structural diversity and excellent compatibility with a wide range of polymerization mechanisms. Yet, their direct use as a reactive handle in post-polymerization modification has been typically avoided due to their low reactivity, which impairs the quantitative conversion typically desired in post-polymerization modification reactions. While activated ester approaches are a well-established alternative, the modification of non-activated esters remains a synthetic and economically valuable opportunity. In this review, we discuss past and recent efforts in the utilization of non-activated ester groups as a reactive handle to facilitate transesterification and aminolysis/amidation reactions, and the potential of the developed methodologies in the context of macromolecular engineering.

Tough adhesion enhancing strategies for injectable hydrogel adhesives in biomedical applications

Injectable hydrogel adhesives have gained widespread attention due to their ease of use, fast application time, and suitability for minimally invasive procedures. Several biomedical applications depend on tough adhesion between hydrogel adhesives and tissues, including wound closure and healing, hemostasis, tissue regeneration, drug delivery, and wearable electronic devices. Compared with bulk hydrogel adhesives formed ex situ, injectable hydrogel adhesives are more difficult to achieve strong adhesion strength due to a further balance of cohesion and adhesion while maintaining their flowability. In this review, the critical principles in designing tough adhesion of injectable hydrogel adhesives are summarized, including simultaneously enhancing their intrinsic interfacial toughness (Γ0inter) and mechanical dissipation (ΓDinter). Thereafter, various design strategies to enhance the Γ0inter and ΓDinter are discussed and evaluated respectively, involving multiple noncovalent/covalent interactions, topological connections, and polymer network structures. Furthermore, targeted biomedical applications of injectable hydrogel adhesives for specific tissue needs are systematically highlighted. In the end, this review outlines the challenges and trends in producing next-generation multifunctional injectable hydrogels for both practical and translational applications.

NHS-POx-loaded patch versus fibrin sealant patch in a porcine robotic liver bleeding model

BACKGROUND

The management of bleeding is paramount to any surgical procedure. With the increased use of less invasive laparoscopic and robotic methods, achieving hemostasis can be challenging since the surgeons cannot manually apply hemostatic agents directly onto bleeding tissue. In this study, we assessed the use of a pliable hemostatic sealant patch comprising fibrous gelatin carrier impregnated with poly(2-oxazoline) (NHS-POx) for hemostasis in robotic liver resection in a porcine bleeding model.

METHODS

The NHS-POx-loaded patch (GATT-Patch), was first evaluated in a Feasibility Study to treat surgical bleeding in 10 lesions, followed by a Comparative Study in which the NHS-POx patch was compared to a standard-of-care fibrin sealant patch (TachoSil), in 36 lesions (superficial, resection, or deep injuries mimicking metastasectomies). For each lesion type, the NHS-POx and fibrin sealant patches were used in an alternating fashion with 18 lesions treated with NHS-POx and 18 with the fibrin patch. Animal preparation and surgical procedures were consistent across studies. The primary outcome was time to hemostasis (TTH) within 3 min for the Feasibility Study and within 5 min for the Comparative Study.

RESULTS

In the Feasibility Study, 8 of the 10 NHS-POx-treated lesions achieved hemostasis at 30 s and 3 min. In the Comparative Study, all 18 NHS-POx patch-treated lesions and 9 of the 18 fibrin sealant patch-treated lesions achieved hemostasis at 5 min. Median TTH with NHS-POx vs fibrin sealant patch was 30 vs 300 s (P < 0.001).

CONCLUSIONS

In this animal study, hemostasis during robotic liver surgery was achieved faster and more often with the NHS-POx loaded vs fibrin sealant patch.

Actively cross-linking hemostatic sealant enables rapid hemostasis and wound closure

A rapid hemostatic sealant can save a patient's life from shock and death due to severe trauma or excessive bleeding from the wound site during surgery. However, an ideal hemostatic sealant needs to meet the standards of safety, efficacy, usability, cost, and approvability and overcome new challenges. Here, we devised a combinatorial hemostatic sealant of PEG succinimidyl glutarate-based cross-linking branched polymers (CBPs) and the active hemostatic peptide (AHP). After ex vivo optimization, the best hemostatic combination was called an active cross-linking hemostatic sealant (ACHS). Interestingly, ACHS formed cross-links with serum proteins, blood cells, and tissue and interconnected coating on blood cells, which might induce hemostasis and tissue adhesion based on SEM images. Moreover, ACHS showed the highest coagulation efficacy, formation, and agglomeration of thrombi within 12 s, and in vitro biocompatibility. Mouse model experiments represented rapid hemostasis within 1 min, wound closure of the liver incision, and less bleeding than the commercialized sealant with tissue biocompatibility. ACHS has the advantages of rapid hemostasis, mild sealant, and easy supply by chemical synthesis without inhibition by anticoagulants, which might minimize bacterial infection by immediate wound closure. Therefore, ACHS could become a new-type hemostatic sealant to match surgical needs for internal bleeding.

Sealing effectiveness of a novel NHS-POx based patch: experiments in a dynamic ex vivo porcine lung

Background

Sealants are used to prevent prolonged pulmonary air leakage (PAL) after lung resections (incidence 5.6-30%). However, clinical evidence to support sealant use is insufficient, with an unmet need for a more effective product. We compared a novel gelatin patch impregnated with functionalized polyoxazolines (NHS-POx) (GATT-Patch) to commercially available sealant products.

Methods

GATT-Patch Single/Double layers were compared to Progel®, Coseal®, Hemopatch® and TachoSil® in an ex vivo porcine lung model (first experiment). Based on these results, a second head-to-head comparison between GATT-Patch Single and Hemopatch® was performed. Air leakage (AL) was assessed in three settings using increasing ventilatory pressures (max =70 cmH2O): (I) baseline, (II) with 25 mm × 25 mm superficial pleural defect, and (III) after sealant application. Lungs floating on saline (37 ℃) were video recorded for visual AL assessment. Pressure and tidal volumes were collected from the ventilator, and bursting pressure (BP), AL and AL-reduction were determined.

Results

Per sealant 10 measurements were performed (both experiments). In the first experiment, BP was superior for GATT-Patch Double (60±24 cmH2O) compared to TachoSil® (30±11 cmH2O, P<0.001), Hemopatch® (33±6 cmH2O, P=0.006), Coseal® (25±13 cmH2O, P=0.001) and Progel® (33±11 cmH2O, P=0.005). AL-reduction was superior for GATT-Patch Double (100%±1%) compared to Hemopatch® (46%±50%, P=0.010) and TachoSil® (31%±29%, P<0.001), and also for GATT-Patch Single (100%±14%, P=0.004) and Progel (89%±40%, P=0.027) compared to TachoSil®. In the second experiment, GATT-Patch Single was superior regarding BP (45±10 vs. 40±6 cmH2O, P=0.043) and AL-reduction (100%±11% vs. 68%±40%, P=0.043) when compared to Hemopatch®.

Conclusions

The novel NHS-POx patch shows promise as a lung sealant, demonstrating elevated BP, good adhesive strength and a superior AL-reduction.

A kaolin/calcium incorporated shape memory and antimicrobial chitosan-dextran based cryogel as an efficient haemostatic dressing for uncontrolled hemorrhagic wounds

Increased mortalities associated with uncontrolled and excessive bleeding is still of paramount concern in the clinics, caregivers and military medics. Herein, we designed a shape memory cryogel based on chitosan (C) and functionalized-dextran (D), incorporated with Kaolin (K) and calcium (Ca²⁺) as haemostatic agents. The developed cryogel (CDKCa) exhibits a uniform interconnected porous architecture with profound fluid absorption ability, rapid blood clotting, stable clot formation and good antibacterial activity. The CDKCa elucidates significantly less clotting time (~30 s; in-vitro) and increased aggregation and activation of platelets/red blood cells in comparison to the control groups and commercial dressings (Axiostat and QuikClot). The developed CDKCa also significantly reduced the aPTT and PT values by ~58 % and 31 % respectively, leading to the activation of intrinsic and extrinsic coagulation cascades. The CDKCa cryogel displays enhanced mechanical stability, flexibility and a good shape memory, a property quintessential to cease uncontrolled bleeding in irregular and non-compressible wounds. Further, the Kaolin and Ca²⁺ incorporated shape memory CDKCa cryogel demonstrates a rapid blood coagulation and stable clot formation in different compressible and non-compressible rat liver and femur hemorrhagic models. In summary, the endorsed results of CDKCa suggest that the design, fabrication and excellent clotting ability may attribute to high haemostatic efficiency of CDKCa dressing and have a great potential to prevent uncontrollable hemorrhages.

Efficacy of a novel polyoxazoline-based hemostatic patch in liver and spleen surgery

BACKGROUND

A new hemostatic sealant based on a N-hydroxy-succinimide polyoxazoline (NHS-POx) polymer was evaluated to determine hemostatic efficacy and long-term wound healing and adverse effects in a large animal model of parenchymal organ surgical bleeds.

METHODS

Experiment 1 included 20 pigs that were treated with two NHS-POx patch prototypes [a gelatin fibrous carrier (GFC) with NHS-POx and an oxidized regenerated cellulose (ORC) with poly(lactic-co-glycolic acid)-NHS-POx:NU-POx (nucleophilically activated polyoxazoline)], a blank gelatin patch (GFC Blank), TachoSil^® and Veriset™ to stop moderate liver and spleen punch bleedings. After various survival periods (1-6 weeks), pigs were re-operated to evaluate patch degradation and parenchymal healing. During the re-operation, experiment 2 was performed: partial liver and spleen resections with severe bleeding, and hemostatic efficacy was evaluated under normal and heparinized conditions of the two previous prototypes and one additional NHS-POx patch. In the third experiment an improved NHS-POx patch (GATT-Patch; GFC-NHS-POx and added 20% as nucleophilically activated polyoxazoline; NU-POx) was compared with TachoSil^®, Veriset™ and GFC Blank on punch bleedings and partial liver and spleen resections for rapid (10s) hemostatic efficacy.

RESULTS

NHS-POx-based patches showed better (GFC-NHS-POx 83.1%, ORC-PLGA-NHS-POx: NU-POx 98.3%) hemostatic efficacy compared to TachoSil^® (25.0%) and GFC Blank (43.3%), and comparable efficacy with Veriset™ (96.7%) on moderate standardized punch bleedings on liver and spleen. All patches demonstrated gradual degradation over 6 weeks with a reduced local inflammation rate and an improved wound healing. For severe bleedings under non-heparinized conditions, hemostasis was achieved in 100% for Veriset™, 40% for TachoSil and 80-100% for the three NHS-POx prototypes; similar differences between patches remained for heparinized conditions. In experiment 3, GATT-Patch, Veriset™, TachoSil and GFC Blank reached hemostasis after 10s in 100%, 42.8%, 7.1% and 14.3%, respectively, and at 3 min in 100%, 100%, 14.3% and 35.7%, respectively, on all liver and spleen punctures and resections.

CONCLUSIONS

NHS-POx-based patches, and particularly the GATT-Patch, are fast in achieving effective hemostatic sealing on standardized moderate and severe bleedings without apparent long-term adverse events.

Chitosan-based hemostatic sponges as new generation hemostatic materials for uncontrolled bleeding emergency: Modification, composition, and applications

The choice of hemostatic technique is a curial concern for surgery and as first-aid treatment in combat. To treat uncontrolled bleeding in complex wound environments, chitosan-based hemostatic sponges have attracted significant attention in recent years because of the excellent biocompatibility, degradability, hemostasis and antibacterial properties of chitosan and their unique sponge-like morphology for high fluid absorption rate and priority aggregation of blood cells/platelets to achieve rapid hemostasis. In this review, we provide a historical perspective on the use of chitosan hemostatic sponges as the new generation of hemostatic materials for uncontrolled bleeding emergencies in complex wounds. We summarize the modification of chitosan, review the current status of preparation protocols of chitosan sponges based on various composite systems, and highlight the recent achievements on the detailed breakdown of the existing chitosan sponges to present the relationship between their composition, physical properties, and hemostatic capacity. Finally, the future opportunities and challenges of chitosan hemostatic sponges are also proposed.

Sprayable surface-adaptive biocompatible membranes for efficient hemostasis via assembly of chitosan and polyphosphate

This work describes a hemostatic membrane system (or surface coating) based on spray-assisted layer-by-layer electrostatic assemblies of oppositely charged polyphosphate (polyP) and chitosan (Cs). The as-prepared membrane formed a robust micro-stratified porous structure with high flexibility. Both blood clotting test and rodent hepatic severe hemorrhage model revealed the excellent hemostatic performance of the membrane system, benefitting from the robust assembly and synergistic effect of polyP/Cs as well as membrane surface chemistry. Compared to Cs-topped membrane surface, polyP-sprayed one exhibited further improved hemostatic effect via promoting fibrin formation. Besides, comprehensive in vitro and in vivo evaluations demonstrated good biocompatibility and biodegradability of the membrane. The present approach that integrated the hemostasis-stimulating capability of polyP/Cs with facile spraying method is highly scalable and flexible, which is envisioned to be adapted readily for other hemostatic polyelectrolytes and surface functionalization of diverse existing hemostatic products on demand.

Chitosan-Based Hemostatic Hydrogels: The Concept, Mechanism, Application, and Prospects

The design of new hemostatic materials to mitigate uncontrolled bleeding in emergencies is challenging. Chitosan-based hemostatic hydrogels have frequently been used for hemostasis due to their unique biocompatibility, tunable mechanical properties, injectability, and ease of handling. Moreover, chitosan (CS) absorbs red blood cells and activates platelets to promote hemostasis. Benefiting from these desired properties, the hemostatic application of CS hydrogels is attracting ever-increasing research attention. This paper reviews the recent research progress of CS-based hemostatic hydrogels and their advantageous characteristics compared to traditional hemostatic materials. The effects of the hemostatic mechanism, effects of deacetylation degree, relative molecular mass, and chemical modification on the hemostatic performance of CS hydrogels are summarized. Meanwhile, some typical applications of CS hydrogels are introduced to provide references for the preparation of efficient hemostatic hydrogels. Finally, the future perspectives of CS-based hemostatic hydrogels are presented.

Conformational Parameters and Hydrodynamic Behavior of Poly(2-Methyl-2-Oxazoline) in a Broad Molar Mass Range

In this work, we report our results on the hydrodynamic behavior of poly(2-methyl-2-oxazoline) (PMeOx). PMeOx is gaining significant attention for use as hydrophilic polymer in pharmaceutical carriers as an alternative for the commonly used poly(ethylene glycol) (PEG), for which antibodies are found in a significant fraction of the human population. The main focus of the current study is to determine the hydrodynamic characteristics of PMeOx under physiological conditions, which serves as basis for better understanding of the use of PMeOx in pharmaceutical applications. This goal was achieved by studying PMeOx solutions in phosphate-buffered saline (PBS) as a solvent at 37 °C. This study was performed based on two series of PMeOx samples; one series is synthesized by conventional living cationic ring-opening polymerization, which is limited by the maximum chain length that can be achieved, and a second series is obtained by an alternative synthesis strategy based on acetylation of well-defined linear poly(ethylene imine) (PEI) prepared by controlled side-chain hydrolysis of a defined high molar mass of poly(2-ethyl-2-oxazoline). The combination of these two series of PMeOx allowed the determination of the Kuhn-Mark-Houwink-Sakurada equations in a broad molar mass range. For intrinsic viscosity, sedimentation and diffusion coefficients, the following expressions were obtained: η=0.015M0.77, s0=0.019M0.42 and D0=2600M-0.58, respectively. As a result, it can be concluded that the phosphate-buffered saline buffer at 37 °C represents a thermodynamically good solvent for PMeOx, based on the scaling indices of the equations. The conformational parameters for PMeOx chains were also determined, revealing an equilibrium rigidity or Kuhn segment length, (A) of 1.7 nm and a polymer chain diameter (d) of 0.4 nm. The obtained value for the equilibrium rigidity is very similar to the reported values for other hydrophilic polymers, such as PEG, poly(vinylpyrrolidone) and poly(2-ethyl-2-oxazoline), making PMeOx a relevant alternative to PEG.

An Antibacterial and Antiadhesion In Situ Forming Hydrogel with Sol-Spray System for Noncompressible Hemostasis

Noncompressible hemorrhage is a major cause of posttrauma death and occupies the leading position among potentially preventable trauma-associated deaths. Recently, multiple studies have shown that strongly adhesive materials can serve as hemostatic materials for noncompressible hemorrhage. However, the risk of severe tissue adhesion limits the use of adhesive hydrogels as hemostatic materials. Here, we report a promising material system comprising an injectable sol and liquid spray as a potential solution. Injectable sol is mainly composed of gelatin (GEL) and sodium alginate (SA), which possess hemostasis and adhesive properties. The liquid spray component, a mixture of tannic acid (TA) and calcium chloride (CaCl₂), rapidly forms an antibacterial, antiadhesive and smooth film structure upon contact with the sol. In vitro and in vivo experiments demonstrated the bioabsorbable, biocompatible, antibacterial, and antiadhesion properties of the in situ forming hydrogel with a sol-spray system. Importantly, the addition of tranexamic acid (TXA) enhanced hemostatic performance in noncompressible areas and in deep wound hemorrhage. Our study offers a new multifunctional hydrogel system to achieve noncompressible hemostasis.

Preparation of methacrylated hyaluronate/methacrylated collagen sponges with rapid shape recovery and orderly channel for fast blood absorption as hemostatic dressing

Uncontrolled hemorrhage of deep, narrow, and non-compressible perforating wounds is responsible for many trauma deaths. In this study, a rapid hemostatic sponge with an orderly channel based on methacrylated collagen (ColMA) was prepared via directional freeze-drying technology. The methacrylated hyaluronate (HAMA) was added to further enhance the mechanical properties of the sponge. The sponge presents excellent mechanical strength, rapid shape recovery, and absorption speed, which was faster than those of many reported natural polymer hemostatic sponges. Moreover, ColMA/HAMA sponge showed much better blood-clotting capacity and superior hemostasis performance than commercially available collagen sponges in vitro and in the rat-liver injury model. This study demonstrated a feasible strategy to construct the rapid hemostatic sponge with an orderly channel for the deep and non-compressible perforating wound.

Graphene-ophicalcite heterogeneous composite sponge for rapid hemostasis

Synergistic functionalization of interface coagulation stimulation and liquid absorption capacity is the key to improve the hemostatic efficiency of hemostats. Herein, we prepared a graphene-ophicalcite (OPH) heterogeneous composite sponge (GOCS) by using the heterogeneous gradient composite strategy. The sponge took cross-linked graphene sponge (CGS) as the main skeleton, allowing the OPH to be controllably positioned on the surface of GOCS. The heterogeneous strategy gave full play to the advantages of the material. On the one hand, GOCS had excellent liquid absorption ability, which enriched blood cells and other coagulation components at the wound interface after contacting blood. On the other hand, the OPH at the interface obviously activated platelets and rapidly triggered coagulation cascade reactions, exhibiting fast response and feedback characteristics for coagulation signals. Under the synergistic effects, the blood clotting index value of GOCS was reduced to 33.87 ± 9.97%, which was significantly lower than those of OPH (46.33 ± 16.85%) and CGS (67.53 ± 5.35%). Importantly, GOCS rapidly stopped bleeding within 51 s in the rat femoral artery model, suggesting its great potential in the field of hemostasis. Therefore, this study provides a new idea for the design and preparation of hemostatic materials via heterogeneous strategy.

Development of silk fibroin‑sodium alginate scaffold loaded silk fibroin nanoparticles for hemostasis and cell adhesion

During wound healing process, it is essential to promote hemostasis and cell adhesion. Herein, we incorporated a scaffold with nanoparticles to improve the hemostatic properties and stimulate cell adhesion. The nanoparticles were prepared by self-assembling of silk fibroin, and the scaffold loaded nanoparticles were synthesized by crosslinking and freeze-drying. Macroscopical images showed that the nanoparticles distributed uniformly and increased the surface roughness of scaffold pore wall. The addition of nanoparticles decreased the pore size, enhanced the compression strength, lowered the degradation rate, and maintained the resilience and water uptake capacity. Compared with pure scaffold, the scaffold loaded nanoparticles revealed higher blood clotting index and promoted platelets adhesion. Furthermore, in vitro tests showed that scaffold loaded nanoparticles exhibited excellent biocompatibility, and stimulation effects on cell proliferation, migration, and adhesion for both L929 cells and HUVECs. Therefore, the scaffold loaded nanoparticles possessed great potential as a wound dressing for efficient hemostasis and subsequent wound healing.

Controlled-Release Nanosystems with a Dual Function of Targeted Therapy and Radiotherapy in Colorectal Cancer

Nanoparticles are excellent platforms for several biomedical applications, including cancer treatment. They can incorporate different molecules to produce combinations of chemotherapeutic agents, radionuclides, and targeting molecules to improve the therapeutic strategies against cancer. These specific nanosystems are designed to have minimal side effects on healthy cells and better treatment efficacy against cancer cells when compared to chemotherapeutics, external irradiation, or targeted radiotherapy alone. In colorectal cancer, some metal and polymeric nanoparticle platforms have been used to potentialize external radiation therapy and targeted drug delivery. Polymeric nanoparticles, liposomes, albumin-based nanoparticles, etc., conjugated with PEG and/or HLA, can be excellent platforms to increase blood circulation time and decrease side effects, in addition to the combination of chemo/radiotherapy, which increases therapeutic efficacy. Additionally, radiolabeled nanoparticles have been conjugated to target specific tissues and are mainly used as agents for diagnosis, drug/gene delivery systems, or plasmonic photothermal therapy enhancers. This review aims to analyze how nanosystems are shaping combinatorial therapy and evaluate their status in the treatment of colorectal cancer.

Natural Scaffolds Used for Liver Regeneration: A Narrative Update

Annually chronic liver diseases cause two million death worldwide. Although liver transplantation (LT) is still considered the best therapeutic option, the limited number of donated livers and lifelong side effects of LT has led researchers to seek alternative therapies. Tissue engineering (TE) as a promising method is considered for liver repair and regeneration. TE uses natural or synthetic scaffolds, functional somatic cells, multipotent stem cells, and growth factors to develop new organs. Biological scaffolds are notable in TE because of their capacity to mimic extracellular matrices, biodegradability, and biocompatibility. Moreover, natural scaffolds are classified based on their source and function in three separate groups. Hemostat-based scaffolds as the first group were reviewed for their application in coagulation in liver injury or surgery. Furthermore, recent studies showed improvement in the function of biological hydrogels in liver regeneration and vascularity. In addition, different applications of natural scaffolds were discussed and compared with synthetic scaffolds. Finally, we focused on the efforts to improve the performance of decellularized extracellular matrixes for liver implantation.

Design and Synthesis of Hybrid Thermo-Responsive Hydrogels Based on Poly(2-oxazoline) and Gelatin Derivatives

The combination of natural and synthetic polymers to form hybrid hydrogels offers the potential of fabricating new materials that possess a combination of properties resulting from both types of polymer classes. Within this work, two alkene-functionalized poly(2-alkyl/aryl–2-oxazoline) (PAOx) copolymers and one gelatin derivative, thiolated gelatin (gel-SH), are synthesized as precursors for hybrid hydrogels through a photo-induced radical thiol-ene crosslinking process. In-situ photo-rheology revealed an increased mechanical stability for hydrogels that possess an excess amount of PAOx precursor. A final qualitative investigation of the thermo-responsive properties of a P(EtOx₂₇₀–norbornenOx₃₀):gel-SH (2:1) hydrogel film revealed a cloud point temperature (T_cp) in the same range as the T_cp of the P(EtOx₂₇₀–norbornenOx₃₀) polymer precursor, which is around 30 °C. This promising result demonstrates that thermo-responsive hybrid poly(2-oxazoline)-gelatin hydrogels could be prepared with predictable T_cps and that further investigation into this appealing feature might be of interest. Ultimately, this work shows a proof-of-concept of using PAOx as potential hybrid hydrogel precursor in combination with cell-interactive gelatin derivatives to potentially improve the mechanical stability of the final scaffolds and introduce additional features such as thermo-responsiveness for the purpose of drug delivery.

Hemostatic biomaterials to halt non-compressible hemorrhage

Non-compressible hemorrhage is an unmet clinical challenge, which occurs in inaccessible sites in the body where compression cannot be applied to stop bleeding. Current treatments reliant on blood transfusion are...

The Topical Hemostatic Materials for Coagulopathy

Medical sciences have witnessed significant progresses in hemostatic materials which have saved lives by supporting natural hemostatic ability. However, for the treatment of coagulopathy, where natural hemostatic ability is dysfunctional,...

Polymeric Materials for Hemostatic Wound Healing

Hemorrhage is one of the greatest threats to life on the battlefield, accounting for 50% of total deaths. Nearly 86% of combat deaths occur within the first 30 min after wounding. While external wound injuries can be treated mostly using visual inspection, abdominal or internal hemorrhages are more challenging to treat with regular hemostatic dressings because of deep wounds and points of injury that cannot be located properly. The need to treat trauma wounds from limbs, abdomen, liver, stomach, colon, spleen, arterial, venous, and/or parenchymal hemorrhage accompanied by severe bleeding requires an immediate solution that the first responders can apply to reduce rapid exsanguinations from external wounds, including in military operations. This necessitates the development of a unique, easy-to-use, FDA-approved hemostatic treatment that can deliver the agent in less than 30 s and stop bleeding within the first 1 to 2 min at the point of injury without application of manual pressure on the wounded area.

Advances in the development of hemostatic biomaterials for medical application

BACKGROUND

Medical hemostatic biological materials are necessary for the development of the process of preventing and stopping damaged intravascular bleeding. In the process, some red blood cells and white blood cells are trapped in nets. The resulting plug is called a blood clot. This is often a good step in wound healing, but separation of blood clots from blood vessel walls can cause serious health problems.

MAIN BODY

The advance in the development of hemostatic biomaterials is necessary for biomedical application. Firstly, the historical background of artificial hemostasis has been included and the current research of hemostasis has been included in more detail. Secondly, the current research of hemostasis has been included on the oxidized cellulose-based hemostatic biomaterials such as starch based on composite cross-linking hemostatic networks, hemostatic materials on NHS-esters, hemostatic agent from local materials and biomaterials for hemostatic management. Thirdly, polysaccharide hemostatic materials, bio-inspired adhesive catechol-conjugated chitosan, mesoporous silica and bioactive glasses for improved hemostasis, minimally invasive hemostatic biomaterials and chitosan-base materials for hemostatic application have been included. Fourthly, the biological properties of natural hemostatic agent by plasma technology and the hemostatic agents based on gelatin-microbial transglutaminase mixes have been also included.

CONCLUSION

Current research on hemostasis includes hemostatic biomaterials such as cellulose-based hemostatic starch based on a complex cross-linked hemostatic network. It also includes polysaccharide hemostatic materials, biomimetic adhesive catechol-binding chitosan, mesoporous silica or physiologically active glass for hemostatic improvement, minimally invasive hemostatic chitosan-based materials, and gelatin-microbial transglutaminase-based hemostatic agents. Future studies should focus on modular combination of hemostatic imitation and reinforcement mechanisms of different materials and technologies to find the optimal system to promote and strengthen active platelet or platelet imitation aggregation in bleeding sites. The second optionally increases the production of thrombin and fiber formation at the site. Third, the formed fibrin biopolymer network has strengthened to reduce thrombosis and amplify hemostasis.

Poly(N-vinyl imidazole) Cross-Linked β-Cyclodextrin Hydrogel for Rapid Hemostasis in Severe Renal Arterial Hemorrhagic Model

A unique facile process has been adopted for fast assembly of a poly(N-vinyl imidazole) cross-linked β-cyclodextrin hydrogel through microwave-assisted free radical polymerization, using N,N'-methylenebis(acrylamide) cross-linker. The copolymer possesses positive surface charge, one of the characteristic properties of an ideal hemostatic hydrogel. The functionalized imidazole-based hydrogel demonstrates rapid, superior blood coagulation kinetics under in vitro and in vivo conditions. On application to a major renal arterial hemorrhagic model, this hydrogel shows better blood clotting kinetics, leading to complete hemostasis in as few as ∼144 ± 7 s. Additionally, 350 μL of whole blood was clotted instantly, in ∼35 s, and therefore, reinforcing its hemostatic potential. The hydrogel demonstrates excellent biocompatibility, when seeded with human dermal fibroblast cells, retaining the native property of its predecessor. In addition, the hydrogel presents excellent hemocompatibility when tested with whole blood with the highest hemolytic ratio of 1.07 ± 0.05%. Moreover, it also demonstrates potential as a carrier for sustained release of an anesthetic drug, lidocaine hydrochloride monohydrate (∼83% in 24 h). The rapid hemostatic behavior of the hydrogel is coupled with its cytocompatibility and hemocompatibilty properties along with controlled drug release characteristics. These behaviors evidently demonstrate it to be an excellent alternative for a superior hemostatic material for severe hemorrhagic conditions.

New polyoxazoline loaded patches for hemostasis in experimental liver resection

A new cost‐effective NHS functionalized polyoxazoline (POx) loaded polymer with strong hemostatic properties has been developed. In this study, we investigate POx loaded hemostatic patches regarding hemostatic efficacy, local inflammatory reaction and wound‐healing, as compared to the non‐POx treated blanks and commercially available hemostatic products. Hundred and ten rats divided into 11 groups of 10 animals underwent partial liver lobe resection. Eight groups received experimental patches, two groups commercially available hemostatic patches (TachoSil® and Veriset™, positive controls), one group with gauzes (negative control). Each animal received twice a patch with a size 1.5 × 2.5 cm, on each partially resected lobe. Primary endpoint was time to hemostasis (TTH). The rats were sacrificed at different time points (1, 3, or 7 days) to measure local inflammatory response and early wound healing. Of the POx loaded patches, GFC NHS‐POx (TTH 20.4 s, p = .019) and GFC‐NHS‐POx1.5 (TTH 0.0 s, p = .003) showed significantly faster TTH compared to TachoSil® (TTH 95.4 s), and were comparable to Veriset™ (TTH 17.0 s). Three patches, GFC‐NHS‐POx 1.5 (TTH 0.0 s, p = .016), ORC NHS‐POx:NU‐POx (TTH 91.4 s, p = .033), and ORC‐PLGA NHS‐POx:NU‐POx (TTH 105.6 s, p = .04) had a lower TTH compared to their own blank carrier (TTH 74.9, 157.8, and 195.7 s, respectively). With regard to biocompatibility, all POx loaded patches showed results comparable to TachoSil® and Veriset™. NHS‐POx‐loaded hemostatic patch demonstrate fast and effective hemostasis, comparable or better than commercially available hemostatic patches, with similar early biocompatibility.

Controlled release of KGF-2 for regulation of wound healing by KGF-2 complexed with "lotus seedpod surface-like" porous microspheres

Keratinocyte growth factor-2 (KGF-2) can regulate the proliferation and differentiation of keratinocyte, which plays a remarkable role in maintaining normal tissue structure and promoting wound healing. As an effective strategy, KGF-2 solution is widely used in the treatment of wounds in clinical applications. However, KGF-2 in solution cannot achieve sustained release, which results in drug loss and unnecessary waste. Polysaccharide hemostasis microspheres (PHMs) are an ideal drug loading platform due to their special "lotus seedpod surface-like" morphology and structure. Herein, to realize the controllable release of KGF-2, PHMs loaded with KGF-2 (KGF-2@PHMs) were prepared. It was found that the bioavailability of KGF-2 was improved greatly. Most importantly, KGF-2@PHMs can reduce inflammation and accelerate the wound healing process due to the controlled release of KGF-2. KGF-2@PHMs might be a potential alternative strategy for wound healing in future clinical applications.

Microchannelled alkylated chitosan sponge to treat noncompressible hemorrhages and facilitate wound healing

Developing an anti-infective shape-memory hemostatic sponge able to guide in situ tissue regeneration for noncompressible hemorrhages in civilian and battlefield settings remains a challenge. Here we engineer hemostatic chitosan sponges with highly interconnective microchannels by combining 3D printed microfiber leaching, freeze-drying, and superficial active modification. We demonstrate that the microchannelled alkylated chitosan sponge (MACS) exhibits the capacity for water and blood absorption, as well as rapid shape recovery. We show that compared to clinically used gauze, gelatin sponge, CELOX™, and CELOX™-gauze, the MACS provides higher pro-coagulant and hemostatic capacities in lethally normal and heparinized rat and pig liver perforation wound models. We demonstrate its anti-infective activity against S. aureus and E. coli and its promotion of liver parenchymal cell infiltration, vascularization, and tissue integration in a rat liver defect model. Overall, the MACS demonstrates promising clinical translational potential in treating lethal noncompressible hemorrhage and facilitating wound healing.

Cellulose fibers-reinforced self-expanding porous composite with multiple hemostatic efficacy and shape adaptability for uncontrollable massive hemorrhage treatment

Uncontrollable hemorrhage leads to high mortality and thus effective bleeding control becomes increasingly important in the military field and civilian trauma arena. However, current hemostats not only present limitation when treating major bleeding, but also have various side effects. Here we report a self-expanding porous composites (CMCP) based on novel carboxymethyl cellulose (CMC) fibers and acetalized polyvinyl alcohol (PVA) for lethal hemorrhage control. The CMC fibers with uniform fibrous structure, high liquid absorption and procoagulant ability, are evenly interspersed inside the composite matrix. The obtained composites possess unique fiber-porous network, excellent absorption capacity, fast liquid-triggered self-expanding ability and robust fatigue resistance, and their physicochemical performance can be fine-tuned through varying the CMC content. In vitro tests show that the porous composite exhibits strong blood clotting ability, high adhesion to blood cells and protein, and the ability to activate platelet and the coagulation system. In vivo hemostatic evaluation further confirms that the CMCP presents high hemostatic efficacy and multiple hemostatic effects in swine femoral artery major hemorrhage model. Additionally, the CMCP will not fall off from the injury site, and is also easy to surgically remove from the wound cavity after the hemostasis. Importantly, results of CT tomography and 3D reconstruction indicate that CMCP can achieve shape adaptation to the surrounding tissues and the wound cavities with different depths and shapes, to accelerate hemostasis while protecting wound tissue and preventing infection.

Poly(2-allylamidopropyl-2-oxazoline)-Based Hydrogels: From Accelerated Gelation Kinetics to In Vivo Compatibility in a Murine Subdermal Implant Model

A rapid photo-curing system based on poly(2-ethyl-2-oxazoline-co-2-allylamidopropyl-2-oxazoline) and its in vivo compatibility are presented. The base polymer was synthesized from the copolymerization of 2-ethyl-2-oxazoline (EtOx) and the methyl ester containing 2-methoxycarboxypropyl-2-oxazoline (C₃MestOx) followed by amidation with allylamine to yield a highly water-soluble macromer. We showed that spherical hydrogels can be obtained by a simple water-in-oil gelation method using thiol-ene coupling and investigated the in vivo biocompatibility of these hydrogel spheres in a 28-day murine subdermal model. For comparison, hydrogel spheres prepared from poly(ethylene glycol) were also implanted. Both materials displayed mild, yet typical foreign body responses with little signs of fibrosis. This is the first report on the foreign body response of a poly(2-oxazoline) hydrogel, which paves the way for future investigations into how this highly tailorable class of materials can be used for implantable hydrogel devices.

Polymeric Tissue Adhesives

Polymeric tissue adhesives provide versatile materials for wound management and are widely used in a variety of medical settings ranging from minor to life-threatening tissue injuries. Compared to the traditional methods of wound closure (i.e., suturing and stapling), they are relatively easy to use, enable rapid application, and introduce minimal tissue damage. Furthermore, they can act as hemostats to control bleeding and provide a tissue-healing environment at the wound site. Despite their numerous current applications, tissue adhesives still face several limitations and unresolved challenges (e.g., weak adhesion strength and poor mechanical properties) that limit their use, leaving ample room for future improvements. Successful development of next-generation adhesives will likely require a holistic understanding of the chemical and physical properties of the tissue-adhesive interface, fundamental mechanisms of tissue adhesion, and requirements for specific clinical applications. In this review, we discuss a set of rational guidelines for design of adhesives, recent progress in the field along with examples of commercially available adhesives and those under development, tissue-specific considerations, and finally potential functions for future adhesives. Advances in tissue adhesives will open new avenues for wound care and potentially provide potent therapeutics for various medical applications.

Fabrication of Hydroxypropyl Chitosan/Soy Protein Isolate Hydrogel for Effective Hemorrhage Control

Hemostatic materials are increasingly important in civilian and military clinics. In this work, a hydrogel was fabricated from hydroxypropyl chitosan (HPCS) and soy protein isolate (SPI) through the crosslinking of epichlorohydrin. Effects of SPI content on the structure, and physical and biological properties of the prepared hydrogels were characterized using Fourier-transform infrared spectroscopy, X-ray diffractometry, scanning electron microscopy, water uptake testing, mechanical properties testing, MTT assay, hemolysis ratio testing, and routine blood coagulation test. The results indicated that the hydrogels showed high water uptake ability and compressive strength. The in vitro biocompatibility evaluation revealed that the hydrogel contains 30% SPI content (HCSH-30), could promote blood coagulation and cell proliferation. Furthermore, the hemostatic model of liver in New Zealand rabbit was applied to assess the hemostatic efficacy of the hydrogels. The results demonstrated that HCSH-30 stopped bleeding in 75 ± 1.63 s and improved hemostasis as compared with medical gauze. Thus, the HPCS/SPI hydrogel is expected to be a potential candidate for effective hemorrhage control. Impact statement Stoppage of bleeding is of paramount clinical significance in prophylactic, surgical, and emergency scenarios. This work describes a hydroxypropyl chitosan (HPCS)/soy protein isolate hydrogel, which could promote blood coagulation and cell proliferation, as well as stop bleeding in 75 ± 1.63 s on the liver of New Zealand rabbits. Thus, we provide a new candidate for hemostatic material and broaden the application of HPCS-based materials.

Thermoresponsive Poly(2-propyl-2-oxazoline) Surfaces of Glass for Nonenzymatic Cell Harvesting

As one of the nonenzymatic cell-harvesting technologies, a thermal-responsive surface based on poly(2-oxazoline)s has achieved initial success in supporting the adhesion and thermal-induced detachment of animal cells. However, because of the laborious preparation procedure, this technique was only limited to research purposes. In this work, through using poly(glycidyl methacrylate) (PGMA) as the anchor layer, poly(2-propyl-2-oxazoline)s (PPOx) were grafted onto glass wafers through a facile two-step coating and annealing procedure for nonenzymatic cell harvesting. In the first step, the piranha solution-activated glass wafers were immersed into the chloroform solution of PGMA and then annealed for a given period of time to immobilize PGMA onto the glass wafers through the bonding between epoxy groups and hydroxyl groups. In the second step, the PGMA-coated glass wafers were further immersed into the chloroform solution of carboxyl-functionalized PPOx. After annealing, PPOx were immobilized onto the PGMA layer through the bonding between carboxyl groups and the residual epoxy groups. Atomic force microscopy, X-ray photoelectron spectroscopy, and ellipsometry were used to characterize the modified glass wafers. The results of cytocompatibility evaluation showed that the PPOx-coated glass wafers were almost nontoxic and were able to support the adhesion and proliferation of L929 cells well. By lowering the temperature to 8 °C, L929 and Vero cells were successfully detached from the PPOx-coated glass wafers without any enzymatic treatment. Further cultivation has demonstrated that the cooling procedure had little effect on cell viability, and the cells still retained good viability after harvesting.

Recent Advances on Synthetic and Polysaccharide Adhesives for Biological Hemostatic Applications

Rapid hemostasis and formation of stable blood clots are very important to prevent massive blood loss from the excessive bleeding for living body, but their own clotting process cannot be completed in time for effective hemostasis without the help of hemostatic materials. In general, traditionally suturing and stapling techniques for wound closure are prone to cause the additional damages to the tissues, activated inflammatory responses, short usage periods and inevitable second operations in clinical applications. Especially for the large wounds that require the urgent closure of fluids or gases, these conventional closure methods are far from enough. To address these problems, various tissue adhesives, sealants and hemostatic materials are placed great expectation. In this review, we focused on the development of two main categories of tissue adhesive materials: synthetic polymeric adhesives and naturally derived polysaccharide adhesives. Research of the high performance of hemostatic adhesives with strong adhesion, better biocompatibility, easy usability and cheap price is highly demanded for both scientists and clinicians, and this review is also intended to provide a comprehensive summarization and inspiration for pursuit of more advanced hemostatic adhesives for biological fields.

A robust poly(N-acryloyl-2-glycine)-based sponge for rapid hemostasis

The development of a hemostatic sponge that can be used for treating both arterial hemorrhage and non-compressible bleeding remains a challenge. In this work, we propose the fabrication of a robust hemostatic sponge by a hydrogen bond strengthening and in situ bubble expanding strategy in thermo-initiation polymerization. A thickening agent, carboxymethyl cellulose (CMC), is incorporated into a hydrogen bonding N-acryloyl-2-glycine (ACG) monomer and an initiator, and vortexing generates air bubbles in the viscous liquid. Heating initiates fast polymerization, and meanwhile aids in expanding of bubbles, which results in the fixation of bubbles throughout the network, and the formation of porous hydrogels. Further lyophilization of the foaming hydrogels leads to the final generation of PACG/CMC sponges with robust compressive strengths due to the hydrogen bonding interactions of PACG. PACG/CMC sponges are shown to demonstrate a tunable liquid absorption ability, in vitro hemostatic ability, better hemocompatibility and cytocompatibility. In a rat liver injury model and a femoral artery injury model, the PACG/CMC sponge can significantly reduce the bleeding time and blood loss compared with gauze and commercial gelatin sponge because of the high blood absorption ability and effective concentration of blood coagulation factors. This PACG sponge holds promising potential as a hemostatic agent applicable in an emergency.