One-Step Preparation of pH-Responsive Polymeric Nanogels as Intelligent Drug Delivery Systems for Tumor Therapy

pH-Responsive Nanogels Generated by Polymerization-Induced Self-Assembly of a Succinate-Functional Monomer

Colloidal nanogels formed from a pH-responsive poly(succinate)-functional core and a poly(sulfonate)-functional corona were prepared via a previously unreported reversible addition-fragmentation chain-transfer (RAFT)-mediated aqueous emulsion polymerization-induced self-assembly (PISA) route. Specifically, a poly(potassium 3-sulfopropyl methacrylate) (PKSPMA50) macromolecular chain-transfer agent (macro-CTA) was synthesized via RAFT solution polymerization followed by chain-extension with a hydrophobic, carboxylic acid-functional, 2-(methacryloyloxy) ethyl succinate (MES) monomer at pH 2. Colloidal nanoparticles with tunable diameters between 66 to 150 nm, depending on the core composition, and narrow particle size distributions were obtained at 20% w/w solids. Well-defined pH-responsive nanogels that swell on increasing the pH could be prepared even without the addition of a cross-linking comonomer, and introducing an additional cross-linker to the core led to smaller nanogels with lower swelling ratios. These nanogels could reversibly change in size on cycling the pH between acidic and basic conditions and remain colloidally stable over a wide pH range and at 70 °C.

Monte Carlo simulation of the ionization and uptake behavior of cationic oligomers into pH-responsive polyelectrolyte microgels of opposite charge - a model for oligopeptide uptake and release

External stimuli can tune the uptake and release of guest molecules in microgels. Especially their pH responsiveness makes microgels exciting candidates for drug delivery systems. When both microgel and guest molecules are pH-responsive, predicting the electrostatically driven uptake can be complex since the ionization depends on many parameters. In this work, we performed Metropolis Monte Carlo simulations while systematically varying the pK of the monomers, the concentrations of microgel and guest molecules to obtain a better understanding of the uptake of weak cationic oligomers as a model for oligopeptides into a weak anionic polyelectrolyte microgel. Further, we varied the chain length of the oligomers. The polyelectrolyte networks can take up oligomers when both the network and the oligomers are charged. The presence of both species in the system leads to a mutual enhancement of their ionization. The uptake induces a release of counterions and results in complex formation between the oligomers and the network, leading to the collapse of the networks. Longer oligomers enhance the ionization of the network and, therefore, the complexation. A higher microgel concentration increases the uptake only around the isoelectric point but prevents the uptake due to lower entropy gain at counterion release at higher pH. The results give an insight into the uptake of cationic oligomers into oppositely charged polyelectrolyte microgels and provide hints for the design of anionic microgels as carriers for guest molecules e.g. antimicrobial peptides.

Enhanced anticancer activity of piperine: Structural optimization and chitosan-based microgels with boosted drug delivery

As a plant-derived drug, piperine possesses therapeutic efficacy for many diseases, but its inherent low solubility and bioavailability have greatly limited its clinical use. Herein, we extracted piperine from black pepper, optimized the structure of piperine to prepare various derivatives, and then explored the anticancer activity of these derivatives. Piperine and its derivatives have high anticancer selectivity against 4T1 cells, exhibiting obvious anticancer properties even at a low concentration of 100 μg/mL. Furthermore, the physicochemical properties of piperine and its derivatives were investigated using density functional theory, demonstrating their considerable biological activity. Moreover, the chitosan-based microgels were prepared to encapsulate the hydrophobic piperine derivative with a high loading efficiency of 81.7 % to overcome the low water solubility of the piperine derivative. It is worth noting that excessive glutathione in tumor cells triggers the degradation of microgels and realizes controllable drug release of up to 72.3 %. Due to its excellent properties, chitosan-based microgels loaded with the piperine derivative can obtain good anticancer behavior of approximately 13.14 % cell viability against 4T1 cells. Therefore, the chitosan-based microgels overcome the low water solubility of the piperine derivative through encapsulation and thus further augment their delivery efficiency and cell internalization capability to realize excellent anticancer activity. This work demonstrates the enhanced anticancer efficacy of the hydrophobic plant-derived drug by means of structural optimization of piperine and chitosan-based microgels with boosted drug delivery.

An overview on nanoplatforms for statins delivery: Perspectives for safe and effective therapy

Statins are the most widely used pharmacological agents for reducing blood cholesterol levels and treating atherosclerotic cardiovascular diseases. Most of the statins' derivatives have been limited by water solubility, bioavailability, and oral absorption, which has led to adverse effects on several organs, especially at high doses. As an approach to reducing statin intolerance, achieving a stable formulation with improved efficacy and bioavailability at low doses has been suggested. Nanotechnology-based formulations may provide a therapeutic benefit over traditional formulations in terms of potency and biosafety. Nanocarriers can provide tailored delivery platforms for statins, thereby enhancing the localized biological effects and lowering the risk of undesired side effects while boosting statin's therapeutic index. Furthermore, tailored nanoparticles can deliver the active cargo to the desired site, which culminates in reducing off-targeting and toxicity. Nanomedicine could also provide opportunities for therapeutic methods by personalized medicine. This review delves into the existing data on the potential improvement of statin therapy using nano-formulations.

Pre-activated nanoparticles with persistent luminescence for deep tumor photodynamic therapy in gallbladder cancer

Phototherapy of deep tumors still suffers from many obstacles, such as limited near-infrared (NIR) tissue penetration depth and low accumulation efficiency within the target sites. Herein, stimuli-sensitive tumor-targeted photodynamic nanoparticles (STPNs) with persistent luminescence for the treatment of deep tumors are reported. Purpurin 18 (Pu18), a porphyrin derivative, is utilized as a photosensitizer to produce persistent luminescence in STPNs, while lanthanide-doped upconversion nanoparticles (UCNPs) exhibit bioimaging properties and possess high photostability that can enhance photosensitizer efficacy. STPNs are initially stimulated by NIR irradiation before intravenous administration and accumulate at the tumor site to enter the cells through the HER2 receptor. Due to Pu18 afterglow luminescence properties, STPNs can continuously generate ROS to inhibit NFκB nuclear translocation, leading to tumor cell apoptosis. Moreover, STPNs can be used for diagnostic purposes through MRI and intraoperative NIR navigation. STPNs exceptional antitumor properties combined the advantages of UCNPs and persistent luminescence, representing a promising phototherapeutic strategy for deep tumors.

Fabrication of a composite 3D-printed titanium alloy combined with controlled in situ drug release to prevent osteosarcoma recurrence

Osteosarcoma is a malignant bone tumor occurring in adolescents. Surgery combined with adjuvant or neoadjuvant chemotherapy is the standard treatment. However, systemic chemotherapy is associated with serious side effects and a high risk of postoperative tumor recurrence, leading to a high amputation rate and mortality in cancer patients. Implant materials that can simultaneously repair large bone defects and prevent osteosarcoma recurrence are in urgent need. Herein, an intelligent system comprising 3D-printed titanium scaffold (TS) and pH-responsive PEGylated paclitaxel prodrugs was fabricated for bone defect reconstruction and recurrence prevention following osteosarcoma surgery. The drug-loaded implants exhibited excellent stability and biocompatibility for supporting the activity of bone stem cells under normal body fluid conditions and the rapid release of drugs in response to faintly acidic environments. An in vitro study demonstrated that five human osteosarcoma cell lines could be efficiently eradicated by paclitaxel released in an acidic microenvironment. Using mice models, we demonstrated that the drug-loaded TS can enable a pH-responsive treatment of postoperative tumors and effectively prevent osteosarcoma recurrence. Therefore, local implantation of this composite scaffold may be a promising topical therapeutic method to prevent osteosarcoma recurrence.

Surfactant and Block Copolymer Nanostructures: From Design and Development to Nanomedicine Preclinical Studies

The medical application of nanotechnology in the field of drug delivery has so far exhibited many efforts in treating simple to extremely complicated and life-threatening human conditions, with multiple products already existing in the market. A plethora of innovative drug delivery carriers, using polymers, surfactants and the combination of the above, have been developed and tested pre-clinically, offering great advantages in terms of targeted drug delivery, low toxicity and immune system activation, cellular biomimicry and enhanced pharmacokinetic properties. Furthermore, such artificial systems can be tailor-made with respect to each therapeutic protocol and disease type falling under the scope of personalized medicine. The simultaneous delivery of multiple therapeutic entities of different nature, such as genes and drugs, can be achieved, while novel technologies can offer systems with multiple modalities often combining therapy with diagnosis. In this review, we present prominent, innovative and state-of-the-art scientific efforts on the applications of surfactant-based, polymer-based, and mixed surfactant-polymer nanoparticle drug formulations intended for use in the medical field and in drug delivery. The materials used, formulation steps, nature, properties, physicochemical characteristics, characterization techniques and pharmacokinetic behavior of those systems, are presented extensively in the length of this work. The material presented is focused on research projects that are currently in the developmental, pre-clinical stage.

Ionisation and swelling behaviour of weak polyampholyte core-shell networks - a Monte Carlo study

The network charge of polyampholyte microgels can be tuned by varying the pH of the surrounding solution, and a charge reversal from a positively charged microgel at low pH to a negatively charged microgel at high pH can be achieved. In a titration experiment, it is difficult to tell apart the ionisation of the acidic and basic monomers in the network and to determine the distribution of charges in the network, whereas using Metropolis Monte Carlo simulations, both the degree of ionisation and the distribution of ionised monomers can be determined separately for both species. Building on our earlier work on alternating polyampholyte microgels, we now investigated the pH-dependent ionisation and the swelling behaviour of polyampholyte core-shell microgels under good solvent conditions. For this purpose, we performed Metropolis Monte Carlo simulations for a bead-spring model using the constant-pH method. As in our previous study on alternating microgels, the width of the U-shaped curve of the microgels volume as a function of pH depends on the relative dissociation constants of acid and base, and the microgel volume can be approximated by a linear function of the total network charge. Due to the spatial separation of acid and base in core-shell systems, the ionisation is less enhanced compared to a microgel with an alternating distribution of the two species. Nevertheless, we still see an influence of the presence of one species on the ionisation behaviour of the other species under good solvent conditions. Furthermore, the isoelectric point is shifted towards higher pH, which is caused by a higher charge density in the core compared to that in the shell. Added salt changes the Donnan equilibrium, which determines the counterion distribution within and outside of the microgel. At the same time, it contributes to the electrostatic screening of the network charges, leading to a narrowing of the U-shaped volume transition curve.

Biomedicine Innovations and Its Nanohydrogel Classifications

As one of the most cutting-edge and promising polymer crosslinked network nanoparticle systems. Polymer nano-sized hydrogels (nanogels) have been a hot topic in the biomedical field over the last few decades. Due to their unique characteristics, which include their relatively high drug encapsulation efficiency, ease of preparation, high tunability, low toxicity, high stability in serum and responsive behavior to a range of stimuli to facilitate drug release. Nanogels are thought to be the next generation of drug delivery systems that can completely change the way that drug delivery systems have an impact on patients' lives. Nanogels have demonstrated significant potential in a variety of fields, including chemotherapy, diagnosis, organ targeting, and delivery of bioactive molecules of different dimensions. However, the lack of substantial clinical data from nanogels becomes one of the major barriers to translating the nanogel concept into a practical therapeutic application for many disease conditions. In addition, nanogel safety profiles have been the major concern that hinders it advancement to the clinical trial phase. This review aims to emphasize the unique properties of nanogels as delivery systems for a variety of bioactive molecules over other nano-delivery systems. Also, this review attempts to give insight into the recent progress in nanogels as a carrier in the field of nanomedicine to overcome complex biological barriers. Relevant scientific data and clinical rationale for the development and the potential use of nanogel as a carrier for targeted therapeutic interventions are discussed. Finally, the concluding points of this review highlight the importance of understanding the long-term toxicity profile of nanogel within the biological system to fully understand their biocompatibility.

Facile synthesis of chitosan-based nanogels through photo-crosslinking for doxorubicin delivery

Chitosan-based nanogels are effective carriers for drug delivery due to their biocompatibility and biodegradability. However, the chemically cross-linked nanogels usually require complicated procedures or tough conditions. Herein, we report a simple approach to generate chitosan-based nanogels by photo-crosslinking of poor solvent-induced nanoaggregates without requiring any emulsifying agent, catalyst, or external crosslinker. O-nitrobenzyl alcohol-modified carboxymethyl chitosan was synthesized and self-crosslinked into the nanogels in a mixed solution of ethanol and water under 365 nm light irradiation due to UV-induced primary amine and o-nitrobenzyl alcohol cyclization. The nanogels (CMC-NBA NPs) and lactobionic acid-decorated nanogels (LACMC-NBA NPs) displayed a uniform diameter (~200 nm) and excellent stability under physiological conditions. Notably, the nanogels exhibited a high loading content (~28 %) due to π-π stacking and electrostatic interactions between doxorubicin (DOX) and the carriers. These DOX-loaded nanogels showed rapid drug release under slightly acidic conditions. The cell and animal experiments confirmed that LACMC-NBA NPs increased cellular uptake, improved cytotoxicity in tumor cells, and enhanced growth inhibition in vivo than CMC-NBA NPs. Thus, these photo-crosslinked nanogels possess great potential for DOX delivery.

Progress in drug-delivery systems in cardiovascular applications: stents, balloons and nanoencapsulation

Drug-delivery systems in cardiovascular applications regularly include the use of drug-eluting stents and drug-coated balloons to ensure sufficient drug transfer and efficacy in the treatment of cardiovascular diseases. In addition to the delivery of antiproliferative drugs, the use of growth factors, genetic materials, hormones and signaling molecules has led to the development of different nanoencapsulation techniques for targeted drug delivery. The review will cover drug delivery and coating mechanisms in current drug-eluting stents and drug-coated balloons, novel innovations in drug-eluting stent technologies and drug encapsulation in nanocarriers for delivery in vascular diseases. Newer technologies and advances in nanoencapsulation techniques, such as the use of liposomes, nanogels and layer-by-layer coating to deliver therapeutics in the cardiovascular space, will be highlighted.

Stimuli-Responsive Dual Cross-Linked N-Carboxyethylchitosan Hydrogels with Tunable Dissolution Rate

Here, we discuss the applicability of (methylenebis(salicylaldehyde)—MbSA) for the fabrication of the stimuli-responsive N-carboxyethylchitosan (CEC) hydrogels with a tunable dissolution rate under physiological conditions. In comparison with non-covalent salicylimine hydrogels, MbSA cross-linking via covalent bis(‘imine clip’) and non-covalent hydrophobic interactions allowed the fabrication of hydrogels with storage moduli > 1 kPa at ten-fold lower aldehyde/CEC molar ratio with the preservation of pH- and amino-acid responsive behavior. Although MbSA-cross-linked CEC hydrogels were stable at neutral and weakly alkaline pH, their disassembly in cell growth medium (Dulbecco’s modified Eagle’s medium, DMEM) under physiological conditions was feasible due to transimination reaction with amino acids contained in DMEM. Depending on the cross-linking density, the complete dissolution time of the fabricated hydrogels varied from 28 h to 11 days. The cytotoxicity of MbSA cross-linked CEC hydrogels toward a human colon carcinoma cell line (HCT 116) and primary human dermal fibroblasts (HDF) was remarkably lower in comparison with CEC-salicylimine hydrogels. Fast gelation, relatively low cytotoxicity, and tunable stimuli-induced disassembly under physiological conditions make MbSA cross-linked CEC hydrogels promising for drug encapsulation and release, 3D printing, cell culturing, and other biomedical applications.

Tumor Microenvironment-Responsive Polypeptide Nanogels for Controlled Antitumor Drug Delivery

Tumor microenvironment-responsive polypeptide nanogels belong to a biomaterial with excellent biocompatibility, easily adjustable performance, biodegradability, and non-toxic properties. They are developed for selective delivery of antitumor drugs into target organs to promote tumor cell uptake, which has become an effective measure of tumor treatment. Endogenous (such as reduction, reactive oxygen species, pH, and enzyme) and exogenous (such as light and temperature) responsive nanogels can release drugs in response to tumor tissues or cells to improve drug distribution and reduce drug side effects. This article systematically introduces the research progress in tumor microenvironment-responsive polypeptide nanogels to deliver antitumor drugs and provides a reference for the development of antitumor nanoformulations.

Stimuli-responsive polypeptide nanoassemblies: Recent progress and applications in cancer nanomedicine

Stimuli-responsive polypeptide nanoassemblies exhibit great potentials for cancer nanomedicines because of desirable biocompatibility and biodegradability, unique secondary conformations, varying functionalities, and especially the stimuli-enhanced therapeutic efficacy and reduced side effect. This review introduces the design and fabrication of stimuli-responsive polypeptide nanoassemblies that exhibit endogenous stimuli (e.g., pH, reduction, reactive oxygen species, adenosine triphosphate and enzyme, etc.) and exogenous light stimuli (e.g., UV and near-infrared light), which are biologically related or applied in the clinic. We also discuss the applications and prospects of those stimuli-responsive polypeptide nanoassemblies that might overcome the biological barriers of cancer nanomedicines for in vivo administration. Much more effort is needed to accelerate the second-generation stimuli-responsive polypeptide nanomedicines for clinical transition and applications. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease.

Molybdenum Trioxide Quantum Dot-Encapsulated Nanogels for Virus Detection by Surface-Enhanced Raman Scattering on a 2D Substrate

The use of nanogels (NGs) to modulate surface-enhanced Raman scattering (SERS) activities is introduced as an innovative strategy to address certain critical issues with SERS-based immunoassays. This includes the chemical deformation of SERS nanotags, as well as their nonspecific interactions and effective "hotspots" formation. Herein, the polymeric cocoon and stimuli-responsive properties of NGs were used to encapsulate SERS nanotags containing plasmonic molybdenum trioxide quantum dots (MoO₃-QDs). The pH-controlled release of the encapsulated nanotags and their subsequent localization by maleimide-functionalized magnetic nanoparticles facilitated the creation of "hotspots" regions with catalyzed SERS activities. This approach resulted in developing a biosensing platform for the ultrasensitive immunoassays of hepatitis E virus (HEV) or norovirus (NoV). The immunoassays were optimized using the corresponding virus-like particles to attain limits of detection of 6.5 and 8.2 fg/mL for HEV-LPs and NoV-LPs, respectively. The SERS-based technique achieved a signal enhancement factor of up to ∼10⁸ due to the combined electromagnetic and chemical mechanisms of the employed dual-SERS substrate of MoO₃-QDs/2D hexagonal boron nitride nanosheets. The highlight and validation of the developed SERS-based immunoassays was the detection of NoV in infected patients' fecal specimen and clinical HEV G7 subtype. Importantly, this system can be used to maintain the stability of SERS nanotags and improve their reliability in immunoassays.

Synergistic Stain Removal Achieved by Controlling the Fractions of Light and Thermo Responsive Components in the Dual-Responsive Copolymer Immobilized on Cotton Fabrics by Cross-Linker

Enhanced synergistic stain removal is realized by tailoring the comonomer fractions of a light- and thermo-dual responsive copolymer, which is immobilized on cotton fabrics by a cross-linker. The copolymer poly(acrylamide azobenzene-co-ethylene glycol methacrylate-co-triethylene glycol methyl ether methacrylate), denoted P(AAAB₁-co-EGMA₂-co-MEO₃MA₁₇), is prepared by the ATRP polymerization method. The present molar ratio for these monomers is 1:2:17. Because of the existence of the light-responsive AAAB unit, the transition temperature of its aqueous solution under UV radiation is shifted to 39 °C, which is 2 °C higher than that in ambient conditions. This increase is caused by the trans-cis isomerization from the azobenzene groups, indicating an increased hydrophilicity of P(AAAB₁-co-EGMA₂-co-MEO₃MA₁₇) under UV radiation. After being immobilized onto cotton fabrics by a cross-linker, they are also dual-responsive. The equilibrium swelling ratio (ESR) of the cotton fabrics is further increased after UV radiation. Compared to our former investigation, the reduction of the AAAB molar fraction from 0.1 to 0.05 causes an increase of the ESR value by 10%. Moreover, the stain removal efficiency of the cotton fabrics immobilized with P(AAAB₁-co-EGMA₂-co-MEO₃MA₁₇) by cross-linker is also significantly improved under UV radiation. The hydrophilicity of the copolymer mainly from the MEO₃MA units is crucial to the cleaning capability. Additionally lowering the attachment between stain and the copolymer coating on the cotton fabrics by trans-cis isomerization in those AAAB units also favors the cleaning. Hence, the stain removal is strongly improved by optimizing the fraction of light- versus thermo-responsive components in the copolymer, which can profoundly reduce the consumption of chemical detergents and energy during laundry.

Bio-Orthogonal Nanogels for Multiresponsive Release

Responsive nanogel systems are interesting for the drug delivery of bioactive molecules due to their high stability in aqueous media. The development of nanogels that are able to respond to biochemical cues and compatible with the encapsulation and the release of large and sensitive payloads remains challenging. Here, multistimuli-responsive nanogels were synthesized using a bio-orthogonal and reversible reaction and were designed for the selective release of encapsulated cargos in a spatiotemporally controlled manner. The nanogels were composed of a functionalized polysaccharide cross-linked with pH-responsive hydrazone linkages. The effect of the pH value of the environment on the nanogels was fully reversible, leading to a reversible control of the release of the payloads and a “stop-and-go” release profile. In addition to the pH-sensitive nature of the hydrazone network, the dextran backbone can be degraded through enzymatic cleavage. Furthermore, the cross-linkers were designed to be responsive to oxidoreductive cues. Disulfide groups, responsive to reducing environments, and thioketal groups, responsive to oxidative environments, were integrated into the nanogel network. The release of model payloads was investigated in response to changes in the pH value of the environment or to the presence of reducing or oxidizing agents.

Design and fabrication of dual responsive lignin-based nanogel via "grafting from" atom transfer radical polymerization for curcumin loading and release

The story of human dreams about curing all diseases, disorders and lesions is as old as human history. In the frontier of medical science, nanomedicine is trying to solve the problem. In this study, inspired by nanotechnology and using "grafting from" approach, a novel lignin-based nanogel was synthesized using atom transfer radical polymerization (ATRP) method. N-isopropylacrylamide (NIPAM) and N,N-dimethylaminoethylmethacrylate (DMAEMA) comonomers were graft copolymerized from fully brominated lignin as ATRP macroinitiator to synthesize lignin-g-P(NIPAM-co-DMAEMA) nanogel (LNDNG). By controlling the initial comonomer compositions and ATRP conditions, four LNDNG systems with different lower critical solution temperatures (LCSTs) of 32, 34, 37 and 42 °C were prepared. The LNDNGs were evaluated by GPC, FT-IR, 1H NMR, UV-Vis, DLS, SEM and TEM analyses. The prepared nanogels exhibited an average diameter of 150 nm with dual temperature and pH responsiveness. Curcumin (CUR) loading capacity and encapsulation efficiency of the LNDNGs were 49.69% and 92.62% on average, respectively. The cumulative release amount of loaded CUR was observed to be 65.36% after 72 h. The new lignin-based NGs proposed in the present work seems to be a promising, safe and comparable system in a near future.

pH-Sensitive nanogels for drug delivery in cancer therapy

Compared to normal tissue, solid tumors exhibit a lower pH value. Such pH gradient can be used to design pH-sensitive nanogels for selective drug delivery. The acid-sensitive elements in the nanogel cause it to swell/degrade rapidly, followed by rapid drug release.

pH-responsive polymeric micelles self-assembled from benzoic-imine-containing alkyl-modified PEGylated chitosan for delivery of amphiphilic drugs

In order to efficiently promote loading efficiency and aqueous photostability of indocyanine green (ICG), an amphiphilic tricarbocyanine dye, the polysaccharide-based nanomicelles utilized as a vehicle for ICG were fabricated by self-assembly of the amphiphilic benzoic-imine-containing PEGylated chitosan/4-(dodecyloxy)benzaldehyde (DBA) conjugates in aqueous solution of pH 7.4. The resulting polymeric micelles were characterized to have a hydrophobic hybrid chitosan/DBA core surrounded by hydrophilic PEG shells. Importantly, the encapsulation of ICG into the hybrid chitosan/DBA core of polymeric micelles by the combined hydrophobic and electrostatic interactions not only promoted the ICG loading but also enhanced its aqueous photostability. With the pH of micelle suspension being reduced from 7.4 to 5.0, upon acid-triggered cleavage of benzoic-imine bonds between chitosan and DBA as well as the extending of the protonated chitosan segments from hybrid cores toward aqueous phase, the rather hydrophobic DBA-rich core was formed within micelles, thereby leading to shrinking of the polymeric micelles. The robust ICG-loaded polymeric micelles showed several superior properties including the inhibition of ICG leakage under the mimic physiological and acidic conditions, favorable biocompatibility and photo-activated hyperthermia effect. This work suggests that the pH-responsive ICG-carrying chitosan-based micelles display great potential in cancer theranostic.

Polymer Capsules with Hydrophobic Liquid Cores as Functional Nanocarriers

Recent developments in the fabrication of core-shell polymer nanocapsules, as well as their current and future applications, are reported here. Special attention is paid to the newly introduced surfactant-free fabrication method of aqueous dispersions of nanocapsules with hydrophobic liquid cores stabilized by amphiphilic copolymers. Various approaches to the efficient stabilization of such vehicles, tailoring their cores and shells for the fabrication of multifunctional, navigable nanocarriers and/or nanoreactors useful in various fields, are discussed. The emphasis is placed on biomedical applications of polymer nanocapsules, including the delivery of poorly soluble active compounds and contrast agents, as well as their use as theranostic platforms. Other methods of fabrication of polymer-based nanocapsules are briefly presented and compared in the context of their biomedical applications.

Thermoresponsive Nanogels Based on Different Polymeric Moieties for Biomedical Applications

Nanogels, or nanostructured hydrogels, are one of the most interesting materials in biomedical engineering. Nanogels are widely used in medical applications, such as in cancer therapy, targeted delivery of proteins, genes and DNAs, and scaffolds in tissue regeneration. One salient feature of nanogels is their tunable responsiveness to external stimuli. In this review, thermosensitive nanogels are discussed, with a focus on moieties in their chemical structure which are responsible for thermosensitivity. These thermosensitive moieties can be classified into four groups, namely, polymers bearing amide groups, ether groups, vinyl ether groups and hydrophilic polymers bearing hydrophobic groups. These novel thermoresponsive nanogels provide effective drug delivery systems and tissue regeneration constructs for treating patients in many clinical applications, such as targeted, sustained and controlled release.

A novel injectable pH-temperature sensitive hydrogel containing chitosan-insulin electrosprayed nanosphere composite for an insulin delivery system in type I diabetes treatment

A novel insulin composite delivery system was prepared and characterized. The composite consisted of a pH- and temperature-sensitive hydrogel, which is an oligomer serine-b-poly(lactide)-b-poly(ethylene glycol)-b-poly(lactide)-b-oligomer serine (OS-PLA-PEG-PLA-OS) pentablock copolymer, as matrix and chitosan-insulin electrosprayed nanospheres (CIN) as constituent materials. The properties of the OS-PLA-PEG-PLA-OS pentablock copolymer and the chitosan-insulin nanoparticles were characterized. The chitosan-insulin nanospheres uniformly distributed in the matrix had a reinforcing effect on the mechanical properties and prolonged the degradation time of the hydrogel depot under body conditions. The composite solutions accommodating different concentrations of the chitosan-insulin nanospheres were subcutaneously injected into induced diabetic BALB/c mice to study the in vivo insulin-release profile. The result showed that insulin concentrations in blood plasma were maintained at a steady-state level. Furthermore, the bio-properties of the insulin were retained and it showed a blood glucose level reducing effect for more than 60 hours after injection to a streptozotocin (STZ)-induced diabetic mouse model. The results suggested that this injectable pH-temperature sensitive hydrogel containing chitosan-insulin electrosprayed nanosphere composites has promising potential applications for type 1 diabetes treatment.

Therapeutic potential of polypeptide-based conjugates: Rational design and analytical tools that can boost clinical translation

The clinical success of polypeptides as polymeric drugs, covered by the umbrella term "polymer therapeutics," combined with related scientific and technological breakthroughs, explain their exponential growth in the development of polypeptide-drug conjugates as therapeutic agents. A deeper understanding of the biology at relevant pathological sites and the critical biological barriers faced, combined with advances regarding controlled polymerization techniques, material bioresponsiveness, analytical methods, and scale up-manufacture processes, have fostered the development of these nature-mimicking entities. Now, engineered polypeptides have the potential to combat current challenges in the advanced drug delivery field. In this review, we will discuss examples of polypeptide-drug conjugates as single or combination therapies in both preclinical and clinical studies as therapeutics and molecular imaging tools. Importantly, we will critically discuss relevant examples to highlight those parameters relevant to their rational design, such as linking chemistry, the analytical strategies employed, and their physicochemical and biological characterization, that will foster their rapid clinical translation.

Ring opening polymerization of α-amino acids: advances in synthesis, architecture and applications of polypeptides and their hybrids

This review provides a comprehensive overview of the latest advances in the synthesis, architectural design and biomedical applications of polypeptides and their hybrids.

Mesoscale Simulations of pH-Responsive Amphiphilic Polymeric Micelles for Oral Drug Delivery

It is of great significance to study the structure property and self-assembly of amphiphilic block copolymer in order to effectively and efficiently design and prepare drug delivery systems. In this work, dissipative particle dynamics (DPD) simulation method was used to investigate the structure property and self-assembly ability of pH-responsive amphiphilic block copolymer poly(methyl methacrylate-co-methacrylic acid)-b-poly(aminoethyl methacrylate) (poly(MMA-co-MAA)-b-PAEMA). The effects of different block ratios (hydrophilic PAEMA segment and pH-sensitive PMAA segment) in copolymer on self-assembly and drug loading capacity including drug distribution were extensively investigated. The increase of hydrophilic PAEMA facilitated the formation of a typical core-shell structure as well as a hydrophobic PMAA segment. Furthermore, the optimal drug-carrier ratio was confirmed by an analysis of the drug distribution during the self-assembly process of block copolymer and model drug Ibuprofen (IBU). In addition, the drug distribution and nanostructure of IBU-loaded polymeric micelles (PMs) self-assembled from precise block copolymer (PMMA-b-PMAA-b-PAEMA) and block copolymer (poly(MMA-co-MAA)-b-PAEMA) with random pH-responsive/hydrophobic structure were evaluated, showing that almost all drug molecules were encapsulated into a core for a random copolymer compared to the analogue. The nanostructures of IBU-loaded PMs at different pH values were evaluated. The results displayed that the nanostructure was stable at pH < pK_a and anomalous at pH > pK_a which indicated drug release, suggesting that the PMs could be used in oral drug delivery. These findings proved that the amphiphilic block copolymer P(MMA₃₀-co-MAA₃₃)-b-PAEMA₃₈ with random structure and pH-sensitivity might be a potential drug carrier. Moreover, DPD simulation shows potential to study the structure property of PMs self-assembled from amphiphilic block copolymer.

Crystallization and Temperature Driven Morphological Evolution of Bio-based Polyethylene Glycol-acrylic Rosin Polymer

In this work, the morphological and conformational evolution of bio-based polyethylene glycol (PEG)-acrylic rosin polymer in water was studied by scanning electron microscopy (SEM), polarized optical microscopy (POM), differential scanning calorimetry (DSC), X-ray diffraction (XRD), Rayleigh light scattering (RLS) and dynamic light scattering (DLS) techniques during a heating and cooling cycle. When the concentration was higher than the critical micelle concentration (CMC), a reversible transformation process, i.e. from micelle to irregular lamella aggregations, was detected. As the concentration was equal to or below the CMC, individual unimers aggregated into needle-shaped crystals composed of acrylic rosin crystalline core in the heating run. The crystallization of acrylic rosin blocks acted as seeds and thus, in the subsequent cooling process, the PEG corona crystallized into the cube-shaped crystals. The cytotoxicity assay showed the biocompatibility of bio-based polyethylene glycol-acrylic rosin polymer. This has great potential in the application of drug delivery and release triggered by temperature.

Multifunctional PEG-b-polypeptide-decorated gold nanorod for targeted combined chemo-photothermal therapy of breast cancer

The combination of chemotherapy and photothermal therapy is acknowledged as one of the most promising approaches in cancer treatment. Targeted delivery and controlled drug release are two important factors for combined chemo-photothermal therapy. In this study, a multifunctional nanoplatform based on gold nanorod (GNR) decorated with folate-conjugated poly(ethylene glycol)-b-poly(L-γ-glutamylhydrazine) (FEGGH) containing disulfide linker and dihydroxyphenyl groups was developed for targeted combined chemo-photothermal therapy of breast cancer. FEGGH was synthesized by ring-opening polymerization of γ-benzyl-l-glutamate-N-carboxyanhydride using folate/cystamine-heterobifunctionalized poly(ethylene glycol) as an initiator, following by hydrazinolysis and carbodiimide reactions. FEGGH was decorated onto GNR through Au-catechol bonds. Chemotherapeutic drug doxorubicin (DOX) was loaded onto the nanoplatform through pH-sensitive hydrazone linkage, obtaining final product FEGGH^DOX-GNR. The DOX-loaded nanoplatform displayed excellent photostability and reduction/pH dual-responsive drug release behavior. Cytological studies demonstrated the effective internalization of FEGGH^DOX-GNR into MCF-7 cells via folate-mediated endocytosis and additive therapeutic effect of combined photothermal-chemotherapy. These results indicate that our nanoplatform may be a promising strategy for targeted combined chemo-photothermal therapy of breast cancer.

Hierarchical tumor acidity-responsive self-assembled magnetic nanotheranostics for bimodal bioimaging and photodynamic therapy

Nanosized self-assemblies built from inorganic nanoparticles and polymer ligands have the potential to generate personalized theranostics systems for diagnostic imaging and cancer therapy. However, most of the theranostics systems suffer from poor targeting activity, insensitive diagnosis and drug leakage, leading to poor treatment results. In this study, a hierarchical tumor acidity-responsive magnetic nanobomb (termed HTAMN) was developed for photodynamic therapy and diagnostic imaging. The HTAMNs were formed through the self-assembly of chlorin e6 (Ce6)-functionalized polypeptide ligand, methoxy poly (ethyleneglycol)-block-poly (dopamine-ethylenediamine-2,3-dimethylmaleic anhydride)-L-glutamate-Ce6 [mPEG-b-P (Dopa-Ethy-DMMA)LG-Ce6] and superparamagnetic iron oxide nanoparticles (SPIONs). Negatively charged HTAMNs circulate in the blood for prolonged periods and promote tumor retention by passive targeting to the tumor. Once the HTAMNs arrive at the tumor location, the acidic extracellular tumor environment reverses the surface charge of the HTAMNs, resulting in tumor accumulation and cellular uptake. Moreover, in response to the more acidic environment inside cells, the photosensitizers are activated resulted in enhanced diagnostic imaging and cancer treatment. The in vitro and in vivo results indicate the effective tumor accumulation, internalization, diagnostic sensitivity and superior photodynamic therapy effect of the HTAMNs. Therefore, designing smart HTAMNs can promote the rapid development of cancer theranostics for clinical implementation.

Enhanced Stain Removal and Comfort Control Achieved by Cross-Linking Light and Thermo Dual-Responsive Copolymer onto Cotton Fabrics

Enhanced capabilities of stain removal and comfort control are simultaneously achieved by the light and thermo dual-responsive copolymer poly(triethylene glycol methyl ether methacrylate- co-ethylene glycol methacrylate- co-acrylamide azobenzene) (P(MEO₃MA- co-EGMA- co-AAAB)) cross-linked on cotton fabrics. P(MEO₃MA- co-EGMA- co-AAAB) is synthesized by sequential atom transfer radical polymerization with a molar ratio of 8 (MEO₃MA):1 (EGMA):1 (AAAB). The MEO₃MA units induce a thermoresponsive behavior to the copolymer. The hydrophilicity of the copolymer films can be further improved by the light-induced trans- cis isomerization of the AAAB units with UV radiation. The copolymer is facilely immobilized onto cotton fabrics with 1,2,3,4-butane tetracarboxylic acid as cross-linker. Due to the immobilization of P(MEO₃MA- co-EGMA- co-AAAB), the hydrophilicity of the fabric surface is increased under UV radiation. Therefore, by simply installing a UV light source in the washing machine, better capability of stain removal is realized for the cross-linked cotton fabrics. It can prominently reduce the consumption of energy, water, and surfactants in laundry. In addition, the trans-AAAB units of the copolymer cause the cross-linked P(MEO₃MA- co-EGMA- co-AAAB) layer to be more hydrophobic under ambient conditions. Hence, the copolymer can more easily collapse and form a porous structure on the fabrics. Thus, the air permeability of cotton fabrics cross-linked with P(MEO₃MA- co-EGMA- co-AAAB) is enhanced by 13% at human body temperature as compared to P(MEO₃MA- co-EGMA), giving improved comfort control during daily wear.