In Vivo Molecular Toxicity Profile of Dental Bioceramics in Embryonic Zebrafish ( Danio rerio)

Effect of Acetylsalicylic Acid on Biological Properties of Novel Cement Based on Calcium Phosphate Doped with Ions of Strontium, Copper, and Zinc

This study aimed to compare the biological properties of newly synthesized cements based on calcium phosphate with a commercially used cement, mineral trioxide aggregate (MTA). Strontium (Sr)-, Copper (Cu)-, and Zinc (Zn)-doped hydroxyapatite (miHAp) powder was obtained through hydrothermal synthesis and characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy dispersive X-ray spectrometry (EDX). Calcium phosphate cement (CPC) was produced by mixing miHAp powder with a 20 wt.% citric acid solution, followed by the assessment of its compressive strength, setting time, and in vitro bioactivity. Acetylsalicylic acid (ASA) was added to the CPC, resulting in CPCA. Biological tests were conducted on CPC, CPCA, and MTA. The biocompatibility of the cement extracts was evaluated in vitro using human dental pulp stem cells (hDPSCs) and in vivo using a zebrafish model. Antibiofilm and antimicrobial effect (quantified by CFUs/mL) were assessed against Streptococcus mutans and Lactobacillus rhamnosus. None of the tested materials showed toxicity, while CPCA even increased hDPSCs proliferation. CPCA showed a better safety profile than MTA and CPC, and no toxic or immunomodulatory effects on the zebrafish model. CPCA exhibited similar antibiofilm effects against S. mutans and L. rhamnosus to MTA.

Molecular insights to in vitro biocompatibility of endodontic Pulpotec with macrophages determined by oxidative stress and apoptosis

Pulp therapy has been emerged as a one of the efficient therapies in the field of endodontics. Among different types of new endodontic materials, pulpotec has been materialized as a recognized material for vital pulp therapy. However, its efficacy has been challenged due to lack of information about its cellular biocompatibility. This study evaluates the mechanistic biocompatibility of pulpotec cement with macrophage cells (RAW 264.7) at cellular and molecular level. The biocompatibility was evaluated using experimental and computational techniques like MTT assay, oxidative stress analysis and apoptosis analysis through flow cytometry and fluorescent microscopy. The results showed concentration-dependent cytotoxicity of pulpotec cement extract to RAW 264.7 cells with an LC 50 of X/10-X/20. The computational analysis depicted the molecular interaction of pulpotec cement extract components with metabolic proteins like Sod1 and p53. The study revealed the effects of Pulpotec cement's extract, showing a concentration-dependent induction of oxidative stress and apoptosis. These effects were due to influential structural and functional abnormalities in the Sod1 and p53 proteins, caused by their molecular interaction with internalized components of Pulpotec cement. The study provided a detailed view on the utility of Pulpotec in endodontic applications, highlighting its biomedical aspects.

Perilous paradigm of graphene oxide and its derivatives in biomedical applications: Insight to immunocompatibility

With advancements in nanotechnology and innovative materials, Graphene Oxide nanoparticles (GONP) have attracted lots of attention among the diverse types of nanomaterials owing to their distinctive physicochemical characteristics. However, the usage at scientific and industrial level has also raised concern to their toxicological interaction with biological system. Understanding these interactions is crucial for developing guidelines and recommendations for applications of GONP in various sectors, like biomedicine and environmental technologies. This review offers crucial insights and an in-depth analysis to the biological processes associated with GONP immunotoxicity with multiple cell lines including human whole blood cultures, dendritic cells, macrophages, and multiple cancer cell lines. The complicated interactions between graphene oxide nanoparticles and the immune system, are highlighted in this work, which reveals a range of immunotoxic consequences like inflammation, immunosuppression, immunostimulation, hypersensitivity, autoimmunity, and cellular malfunction. Moreover, the immunotoxic effects are also highlighted with respect to in vivo models like mice and zebrafish, insighting GO Nanoparticles' cytotoxicity. The study provides invaluable review for researchers, policymakers, and industrialist to understand and exploit the beneficial applications of GONP with a controlled measure to human health and the environment.

Embryotoxicity and teratogenesis of orthodontic acrylic resin in zebrafish

Objectives

This study investigated the in vivo embryotoxicity, teratogenic potential, and additional effects of orthodontic acrylic resin as well as its components, utilizing zebrafish as a model organism. The research focused on morphological, cardiac, behavioral, and cognitive evaluations that were performed on embryos and larval-stage animals subjected to chronic exposure.

Materials and methods

Embryo and larval-stage zebrafish were categorized into five experimental groups, which were further subdivided into five subgroups. These subgroups included three specific doses for each tested substance, a control with the vehicle (0.1 % dimethyl sulfoxide in water), and an absolute control (water). Assessments were performed on day 5 post-fertilization, which included morphological, cardiac, behavioral, and cognitive evaluations. All experiments had a sample size of ten animals and were performed in triplicate. Survival and hatching rates were analyzed using the Kaplan-Meier test, while other measurements were assessed using one-way analysis of variance (ANOVA), followed by the Tukey post hoc test.

Results

Statistically significant differences were observed between the control and treatment groups across all the tested substances for heart rate, cognitive responsiveness, and cellular apoptosis. However, survival, hatching rate, and other parameters exhibited no significant variation, except for the highest dose in the dibutyl phthalate group, which demonstrated a notable difference in survival.

Conclusions

Chronic exposure to acrylic resin and its components may be associated with decreased cognitive ability and cardiac rhythm, as well as an increase in the level of cellular apoptosis in zebrafish.

Proximal discrepancies in intrinsic atomic interaction determines comparative in vivo biotoxicity of Chlorpyrifos and 3,5,6-trichloro-2-pyridinol in embryonic zebrafish

Bioaccumulation of Chlorpyrifos (CP) as pesticides due to their aggrandized use in agriculture has raised serious concern on the health of ecosystem and human beings. Moreover, their degraded products like 3,5,6-trichloro-2-pyridinol (TCP) has enhanced the distress due to their unpredictable biotoxicity. This study evaluates and deduce the comparative in vivo mechanistic biotoxicity of CP and TCP with zebrafish embryos through experimental and computational approach. Experimental cellular and molecular analysis showed higher induction of morphological abnormalities, oxidative stress and apoptosis in TCP exposed embryos compared to CP exposure due to upregulation of metabolic enzymes like Zhe1a, Sod1 and p53. Computational analysis excavated the differential discrepancies in intrinsic atomic interaction as a reason of disparity in biotoxicity of CP and TCP. The mechanistic differences were deduced due to the differential accumulation and internalisation leading to variable interaction with metabolic enzymes for oxidative stress and apoptosis causing physiological and morphological abnormalities. The study unravelled the information of in vivo toxicity at cellular and molecular level to advocate the attention of taking measures for management of CP as well as TCP for environmental and human health.

In vivo cytotoxicity analysis of bioceramic root canal sealers on zebrafish embryo

Background

This study evaluated the cytotoxicity of four bioceramic root canal sealers (RCSs) in vivo. The embryonic zebrafish characteristics, such as mortality, survival, hatching, and general morphology, served as the parameters for assessing cytotoxicity.

Methods

The RCSs, namely GuttaFlow Bioseal, MTA Fillapex, CeraSeal Bioceramic, and iRoot SP, were mixed according to the manufacturer's guidelines. The extract solution was prepared by immersing the set RCS into 1X dilution of E3 solution. Then, the extract solution was delivered into a Petri dish where zebrafish embryos were allowed to develop. Cytotoxicity was evaluated 24, 48, 72, and 96 hours after fertilization.

Results

The Kruskal-Wallis test showed that except for GuttaFlow Bioseal, the mortality, survival, and hatching of zebrafish embryos for the remaining three bioceramic RCSs were significantly different from the negative controls (P<0.05). Significant differences were also evident in the mortality, survival, and hatching of zebrafish embryos between GuttaFlow Bioseal and three other RCSs (P<0.05).

Conclusion

GuttaFlow Bioseal was less cytotoxic than other bioceramics RCSs; MTA Fillapex, CeraSeal Bioceramic root canal sealer, and iRoot SP root canal sealer exhibited comparable cytotoxicity.

Investigation on the physical properties and biocompatibility of zirconia-alumina-silicate@diopside composite materials and its in vivo toxicity study in embryonic zebrafish

Bioceramic materials have a wide range of applications in the biomedical field, such as in the repair of bone defects and dental surgery. Silicate-based bioceramics have attracted biomedical researchers' interest due to their bioactivity and biodegradability. In this study, extended the scope of ZAS utilization in bone tissue engineering by introducing calcium-magnesium-silicate (diopside, CMS) as an interface material aim to develop a machinable bioceramic composite (ZASCMS) by the sol-gel method. The physicochemical characterization, in vitro biological properties and in vivo zebrafish cytotoxicity study of ZAS-based composites as a function of CMS contents, 0, 25, 50, 75 and 100 wt%, were performed. Results showed that the as-prepared ZASCMS possessed porous architecture with well-interconnected pore structure. Results also revealed that the mechanical properties of ZASCMS composite materials were gradually improved with increasing CMS contents. The ZASCMS composites with more than 50 wt% CMS had the highest compressive strength and modulus of 6.78 ± 0.62 MPa and 340.10 ± 16.81 MPa, respectively. Regarding in vitro bioactivities, the composite scaffolds were found to stimulate osteoblast-like UMR-106 cell adhesion, growth, and proliferation. The antibacterial activity of the ZASCMS composite scaffolds was tested against Staphylococcus epidermidis (S. epidermidis) and Escherichia coli (E. coli) also exhibited an antibacterial property. Furthermore, the in vivo studies using embryonic zebrafish were exposed to as-prepared particles (0-500 μg mL-1) and showed that the synthesized ZAS, CMS and ZASCMS composite particles were non-toxic based on the evaluation of survivability, hatching rate and embryonic morphology. In conclusions, our results indicated that the synthesized composite exhibited their biological properties and antibacterial activity, which could well be a promising material with high potential to be applied in orthopaedic and dental tissue engineering.

A Short Review of the Toxicity of Dentifrices-Zebrafish Model as a Useful Tool in Ecotoxicological Studies

This review aims to summarize the literature data regarding the effects of different toothpaste compounds in the zebrafish model. Danio rerio provides an insight into the mechanisms of the ecotoxicity of chemicals as well as an assessment of their fate in the environment to determine long-term environmental impact. The regular use of adequate toothpaste with safe active ingredients possessing anti-bacterial, anti-inflammatory, anti-oxidant, and regenerative properties is one of the most effective strategies for oral healthcare. In addition to water, a typical toothpaste consists of a variety of components, among which three are of predominant importance, i.e., abrasive substances, fluoride, and detergents. These ingredients provide healthy teeth, but their environmental impact on living organisms are often not well-known. Each of them can influence a higher level of organization: subcellular, cellular, tissue, organ, individual, and population. Therefore, it is very important that the properties of a chemical are detected before it is released into the environment to minimize damage. An important part of a chemical risk assessment is the estimation of the ecotoxicity of a compound. The zebrafish model has unique advantages in environmental ecotoxicity research and has been used to study vertebrate developmental biology. Among others, the advantages of this model include its external, visually accessible development, which allows for providing many experimental manipulations. The zebrafish has a significant genetic similarity with other vertebrates. Nevertheless, translating findings from zebrafish studies to human risk assessment requires careful consideration of these differences.

Biofilm modifiers: The disparity in paradigm of oral biofilm ecosystem

A biofilm is a population of sessile microorganisms that has a distinct organized structure and characteristics like channels and projections. Good oral hygiene and reduction in the prevalence of periodontal diseases arise from minimal biofilm accumulation in the mouth, however, studies focusing on modifying the ecology of oral biofilms have not yet been consistently effective. The self-produced matrix of extracellular polymeric substances and greater antibiotic resistance make it difficult to target and eliminate biofilm infections, which lead to serious clinical consequences that are often lethal. Therefore, a better understanding is required to target and modify the ecology of biofilms in order to eradicate the infection, not only in instances of oral disorders but also in terms of nosocomial infections. The review focuses on several biofilm ecology modifiers to prevent biofilm infections, as well as the involvement of biofilm in antibiotic resistance, implants or in-dwelling device contamination, dental caries, and other periodontal disorders. It also discusses recent advances in nanotechnology that may lead to novel strategies for preventing and treating infections caused by biofilms as well as a novel outlook to infection control.

Do Curdlan Hydrogels Improved with Bioactive Compounds from Hop Exhibit Beneficial Properties for Skin Wound Healing?

Chronic wounds, among others, are mainly characterized by prolonged inflammation associated with the overproduction of reactive oxygen species and pro-inflammatory cytokines by immune cells. As a consequence, this phenomenon hinders or even precludes the regeneration process. It is known that biomaterials composed of biopolymers can significantly promote the process of wound healing and regeneration. The aim of this study was to establish whether curdlan-based biomaterials modified with hop compounds can be considered as promising candidates for the promotion of skin wound healing. The resultant biomaterials were subjected to an evaluation of their structural, physicochemical, and biological in vitro and in vivo properties. The conducted physicochemical analyses confirmed the incorporation of bioactive compounds (crude extract or xanthohumol) into the curdlan matrix. It was found that the curdlan-based biomaterials improved with low concentrations of hop compounds possessing satisfactory hydrophilicity, wettability, porosity, and absorption capacities. In vitro, tests showed that these biomaterials were non-cytotoxic, did not inhibit the proliferation of skin fibroblasts, and had the ability to inhibit the production of pro-inflammatory interleukin-6 by human macrophages stimulated with lipopolysaccharide. Moreover, in vivo studies showed that these biomaterials were biocompatible and could promote the regeneration process after injury (study on Danio rerio larvae model). Thus, it is worth emphasizing that this is the first paper demonstrating that a biomaterial based on a natural biopolymer (curdlan) improved with hop compounds may have biomedical potential, especially in the context of skin wound healing and regeneration.

Atmospheric microplastic and nanoplastic: The toxicological paradigm on the cellular system

The increasing demand for plastic in our daily lives has led to global plastic pollution. The improper disposal of plastic has resulted in a massive amount of atmospheric microplastics (MPs), which has further resulted in the production of atmospheric nanoplastics (NPs). Because of its intimate relationship with the environment and human health, microplastic and nanoplastic contamination is becoming a problem. Because microplastics and nanoplastics are microscopic and light, they may penetrate deep into the human lungs. Despite several studies demonstrating the abundance of microplastics and nanoplastics in the air, the potential risks of atmospheric microplastics and nanoplastics remain unknown. Because of its small size, atmospheric nanoplastic characterization has presented significant challenges. This paper describes sampling and characterization procedures for atmospheric microplastics and nanoplastics. This study also examines the numerous harmful effects of plastic particles on human health and other species. There is a significant void in research on the toxicity of airborne microplastics and nanoplastics upon inhalation, which has significant toxicological potential in the future. Further study is needed to determine the influence of microplastic and nanoplastic on pulmonary diseases.

The translational paradigm of nanobiomaterials: Biological chemistry to modern applications

Recently nanotechnology has evolved as one of the most revolutionary technologies in the world. It has now become a multi-trillion-dollar business that covers the production of physical, chemical, and biological systems at scales ranging from atomic and molecular levels to a wide range of industrial applications, such as electronics, medicine, and cosmetics. Nanobiomaterials synthesis are promising approaches produced from various biological elements be it plants, bacteria, peptides, nucleic acids, etc. Owing to the better biocompatibility and biological approach of synthesis, they have gained immense attention in the biomedical field. Moreover, due to their scaled-down sized property, nanobiomaterials exhibit remarkable features which make them the potential candidate for different domains of tissue engineering, materials science, pharmacology, biosensors, etc. Miscellaneous characterization techniques have been utilized for the characterization of nanobiomaterials. Currently, the commercial transition of nanotechnology from the research level to the industrial level in the form of nano-scaffolds, implants, and biosensors is stimulating the whole biomedical field starting from bio-mimetic nacres to 3D printing, multiple nanofibers like silk fibers functionalizing as drug delivery systems and in cancer therapy. The contribution of single quantum dot nanoparticles in biological tagging typically in the discipline of genomics and proteomics is noteworthy. This review focuses on the diverse emerging applications of Nanobiomaterials and their mechanistic advancements owing to their physiochemical properties leading to the growth of industries on different biomedical measures. Alongside the implementation of such nanobiomaterials in several drug and gene delivery approaches, optical coding, photodynamic cancer therapy, and vapor sensing have been elaborately discussed in this review. Different parameters based on current challenges and future perspectives are also discussed here.

Hydoxylated β- and δ-Hexacholorocyclohexane metabolites infer influential intrinsic atomic pathways interaction to elicit oxidative stress-induced apoptosis for bio-toxicity

Hexachlorocyclohexane (HCH) has been recognized as an effective insecticide to protect crops against grasshoppers, cohort insects, rice insects, wireworms, and other agricultural pests and; for the control of vector-borne diseases such as malaria. It is a cyclic, saturated hydrocarbon, which primarily exists as five different stable isomers in the environment. Though the use of HCH is banned in most countries owing to its adverse effects on the environment, its metabolites still exist in soil and groundwater, because of its indiscriminate applications. In this study, a dose-dependent toxicity assay of the HCH isomers isolated from soil and water samples of different regions of Odisha, India was performed to assess the in vivo developmental effects and oxidative stress in zebrafish embryos. Toxicity analysis revealed a significant reduction in hatching and survivability rate along with morphological deformities (edema, tail malformations, spinal curvature) upon an increase in the concentration of HCH isomers; beta isomer exhibiting maximum toxicity (p < 0.05). Oxidative stress assay showed that ROS and apoptosis were highest in the fish exposed to β-2 and δ-2 isomers of HCH in comparison to the untreated one. Zebrafish proved to be a useful biological model to assess the biological effects of HCH isomers. In addition, the results suggest the implementation of precautionary measures to control the use of organochlorine compounds that can lead to a decrease in the HCH isomers in the field for a healthier environment.

Study on chemical constituents of Folium Artemisiae argyi Carbonisatum, toxicity evaluation on zebrafish and intestinal hemostasis

Folium Artemisiae argyi Carbonisatum (FAAC) is a traditional medicine widely used in clinic. It has the effect of hemostasis by warming meridians. In order to further explore the chemical composition and biological activity of FAAC, the methanol extract of FAAC was isolated and purified by open column and high- performance liquid chromatography. and the complete structure was characterized by nuclear magnetic resonance (NMR) and LREI-MS for the first time, namely rutin, quercetin and octacosanol respectively. Initially the toxic effect of methanol extract of FAAC on zebrafish was evaluated by observing the phenotypic characteristics, spontaneous twitch times, heart rate, hatching rate, the distance of SV-BA and cardiomyocyte apoptosis of zebrafish. The results showed that FAAC has embryonic development toxicity and cardiotoxicity when it was higher than 62.5 μg/mL. Meanwhile, the hemostatic effect of methanol extract of FAAC was compared with FAA (Folium Artemisia argyi) by zebrafish intestinal bleeding model originally. The results showed that the hemostatic effect of the medium and high concentration dose groups (3.0 and 30.0 μg/mL) was enhanced for both FAAC and FAA. This study provided an experimental basis for the clinical application of FAAC.

Zebrafish as an experimental model for the simulation of neurological and craniofacial disorders

Zebrafish have gained momentum as a leading experimental model in recent years. At present, the zebrafish vertebrate model is increasingly used due to its multifactorial similarities to humans that include genetic, organ, and cellular factors. With the emergence of novel research techniques that are very expensive, it is necessary to develop affordable and valid experimental models. This review aimed to highlight some of the most important similarities between zebrafish and humans by emphasizing the relevance of the first in simulating neurological disorders and craniofacial deformity.

Opportunistic gill infection is associated with TiO2 nanoparticle-induced mortality in zebrafish

The large amounts of engineered titanium dioxide nanoparticles (TiO2NPs) that have been manufactured have inevitably been released into the ecosystem. Reports have suggested that TiO2 is a relatively inert material that has low toxicity to animals. However, as various types of NPs increasingly accumulate in the ocean, their effects on aquatic life-forms remain unclear. In this study, a zebrafish model was used to investigate TiO2NP-induced injury and mortality. We found that the treatment dosages of TiO2NP are positively associated with increased motility of zebrafish and the bacterial counts in the water. Notably, gill but not dorsal fin and caudal fin of the zebrafish displayed considerably increased bacterial load. Metagenomic analysis further revealed that gut microflora, such as phyla Proteobacteria, Bacteroidetes, and Actinobacteria, involving more than 95% of total bacteria counts in the NP-injured zebrafish gill samples. These results collectively suggest that opportunistic bacterial infections are associated with TiO2NP-induced mortality in zebrafish. Infections secondary to TiO2NP-induced injury could be a neglected factor determining the detrimental effects of TiO2NPs on wild fish.

Methacrylate peak determination and selection recommendations using ATR-FTIR to investigate polymerisation of dental methacrylate mixtures

Investigation of polymerisation kinetics using ATR-FTIR systems is common in many dental studies. However, peak selection methods to calculate monomer-polymer conversion can vary, consequently affecting final results. Thus, the aim of this study is to experimentally confirm which method is less prone to systematic errors. Three commercial restorative materials were tested-Vertise Flow (VF), Constic and Activa Bioactive Restorative Kids. Firstly, Attenuated Total Reflectance Fourier Transform Infra-Red (ATR-FTIR) (Spectrum One, Perkin-Elmer, UK) spectra of monomers were acquired-10-methacryloyloxy decyl dihydrogen phosphate (10-MDP), bisphenol-A glycidyl dimethacrylate (Bis-GMA), 2-hydroxyethyl methacrylate (HEMA), triethyelene glycol dimethacrylate (TEGDMA) and urethane dimethacrylate (UDMA) to investigate proportionality of methacrylate peak heights versus concentration. Spectral changes upon light exposure of 2 mm discs of the restorative materials (irradiated for 20 s, LED curing unit 1100-1330 mW/cm2) were assessed to study polymerisation kinetics (n = 3), with continuous acquisition of spectra, before, during and after light exposure. Peak differences and degrees of conversion (DC %) were calculated using 1320/1336, 1320/1350 and 1636/1648 cm-1 as reaction/reference peaks. Inferential statistics included a MANOVA and within-subjects repeated measures ANOVA design (5% significance level). Proportionality of methacrylate peak height to concentration was confirmed, with the 1320/1352 cm-1 peak combination showing the lowest coefficient of variation (8%). Difference spectra of the polymerisation reaction showed noise interference around the 1500-1800 cm-1 region. Across the different materials, DC % results are highly dependent upon peak selection (p<0.001), with higher variability associated to the 1636 cm-1. Significant differences in the materials were only detected when the 1320 cm-1 peak was used (p<0.05). Within the same materials, methods were significantly different for Constic and Activa (p<0.05). It is possible to conclude that the 1320 cm-1 peak is more adequate to assess polymerisation of methacrylates and is therefore recommended.

Molecular insights and cell cycle assessment upon exposure to Chaga (Inonotus obliquus) mushroom polysaccharides in zebrafish (Danio rerio)

Chaga (Inonotus obliquus) mushroom is considered as one of the most powerful antioxidants across the world. Though the therapeutic effects of Chaga components are well characterized in vitro, the in vivo developmental effects are not elucidated in detail. In this study, we assessed the in vivo developmental effects of Chaga polysaccharides in zebrafish, along with revealing the effects on cell cycle and apoptosis. Chaga mushroom polysaccharides comprised xylulose, rhamnose, mannose, glucose, inositol, and galactose, in addition to phenolic compounds; zebrafish embryos exhibited normal embryonic development upon transient exposure to Chaga extract (24 hours). Most embryos (>90%) were found to be healthy even at high concentrations (5 mg/mL). In addition, staining with the DNA binding dye, acridine orange showed that Chaga polysaccharides alleviated oxidative stress. Flow cytometric analysis using H₂DCFDA that specifically binds to cells with fragmented DNA showed significantly reduced levels of intracellular reactive oxygen species (ROS) (p < 0.05), which in turn reduced apoptosis in the developing embryos. Cell cycle analysis by measuring the DNA content using flow cytometry revealed that Chaga polysaccharides moderately arrested the cells at G1 stage, thereby inhibiting cell proliferation that can be further explored in cancer studies. Overall, transient exposure of Chaga polysaccharide extract reduced intracellular ROS and assisted in the normal development of zebrafish.

Selective in vivo molecular and cellular biocompatibility of black peppercorns by piperine-protein intrinsic atomic interaction with elicited oxidative stress and apoptosis in zebrafish eleuthero embryos

Day to day consumption of black pepper raise concern about the detailed information about their medicinal, pharmaceutical values and knowledge about the biocompatibility with respect to ecosystem. This study investigates the in vivo selective molecular biocompatibility of its seed cover (SC) and seed core (SP) powder extract using embryonic zebrafish model. Gas chromatography mass spectrometry (GCMS) analysis of the extract prepared by grinding showed presence of different components with "piperine" as principle component. Biocompatibility analysis showed dose and time dependent selective effect of SC and SP with LC50 of 30.4 μg/ml and 35.6 μg/ml, respectively on survivability, hatching and heartbeat rate in embryonic zebrafish. Mechanistic investigation elucidated it as effect of accumulation and internalization of black pepper leading to their influence on structure and function of cellular proteins hatching enzyme (he1a), superoxide dismutase (sod1) and tumor protein (tp53) responsible for delayed hatching, oxidative stress induction and apoptosis. The study provided insight to selective biocompatibility of black pepper expedient to produce higher quality spices with respect to pharmaceutical, clinical and environmental aspects.