Robust Antibacterial Activity of Tungsten Oxide (WO3-x) Nanodots

Nanoparticles of Cs0.33WO3 as Antibiofilm Agents and Photothermal Treatment to Inhibit Biofilm Formation

Metal oxide nanoparticles with photothermal properties have attracted considerable research attention for their use in biomedical applications. Cesium tungsten oxide (Cs0.33WO3) nanoparticles (NPs) exhibit strong absorption in the NIR region due to localized surface plasmon resonance, through which they convert light to heat; hence, they can be applied to photothermal treatment for bacteria and biofilm ablation. Herein, Cs0.33WO3 NPs were synthesized through solid-phase synthesis, and their physical properties were characterized through Zetasizer, energy dispersive X-ray spectroscopy, Fourier transform infrared spectrometer, and scanning and transmission electron microscopy (SEM and TEM, respectively). Burkholderia cenocepacia isolates were cultured in tryptic soy broth supplemented with glucose, and the biofilm inhibition and antibiofilm effects of the NPs were determined using a crystal violet assay and the Cell Counting Kit-8 (CCK-8) assay. The biofilm morphology and viability of NP-treated cultures after NIR irradiation were evaluated through SEM and confocal microscopy, respectively. The cytotoxicity of NPs to human macrophages was also assessed using the CCK-8 assay. The NPs effectively inhibited biofilm formation, with a formation rate of <10% and a viability rate of <50% at the concentration of ≥200 μg/mL. The confocal analysis revealed that NIR irradiation markedly enhanced biofilm cytotoxicity after treatment with the NPs. The assay of cytotoxicity to human macrophages demonstrated the biocompatibility of the NPs and NIR irradiation. In sum, the Cs0.33WO3 NPs displayed effective biofilm inhibition and antibiofilm activity at 200 μg/mL treatment concentration; they exhibited an enhancement effect under the NIR irradiation, suggesting Cs0.33WO3 NPs are a potential candidate agent for NIR-irradiated photothermal treatment in bacterial biofilm inhibition and antibiofilm.

Multifunctional integration of tungsten oxide (WO3) coating: A versatile approach for enhanced performance of antibiotics against single mixed bacterial infections

Nanomaterials containing tungsten (TNMs), characterized by diverse nanostructures had been extensively used in biomedical sector. Despite numerous reports focusing on TNM applications in specific biomedical areas, there is a noticeable absence of comprehensive studies that focused on detailed characterization of nanomaterials along with their biological applications. The present work described the structural, morphological, and antimicrobial properties of tungsten oxide (WO3) nanoparticles coated by antibiotics (nanobiotics), and their application on single and mixed bacterial culture. The nanobiotics included in this study were WO3 coated with ampicillin (W+A), WO3 coated with penicillin (P+W), and WO3 coated with ciprofloxacin (C+W). Techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray spectroscopy (EDX), Fourier transforms infrared spectroscopy (FTIR), Rrman spectroscopy, and UV-visible spectroscopy were used to characterize synthesized nanoparticles. The minimum inhibitory concentration of C+W nanobiotic against S. aureus, E. coli, and mixed culture (S. aureus +E. coli) was lower than that of P+W and A+W. The impact of incubation period showed significant differences for each of nanobiotic against S. aureus, E. coli, and mixed culture. However, there were also non-significant differences among incubation periods for antibacterial activity of nanobiotics. It was pertinent to note that percentage variation in susceptibility of S. aureus with respect to mixed culture remained higher as compared to E. coli, indicating it stronger candidate imposing resistance. This paper thus suggested the strategy of coating of antibiotics with with WO3 nanoparticles as an ideal combination for resistance modulation against single and mixed culture bacteria.

Nanotoxicity of tungsten trioxide nanosheets containing oxygen vacancy to human umbilical vein endothelial cells

Because of the excellent performance in photochemistry, WO3 is increasingly applied in the field of biology and medicine. However, little is known about the mechanism of WO3 cytotoxicity. In this work, WO3 nanosheets with oxygen vacancy are synthesized by solvothermal method, then characterized and added to culture medium of human umbilical vein endothelial cells (HUVECs) with different concentrations. We characterized and analyzed the morphology of nano-WO3 by transmission electron microscopy and calculated the specific data of oxygen vacancy by XPS. It is the first time the effect of WO3-x on cells that WO3-x can cause oxidative stress in HUVEC cells, resulting in DNA damage and thus promoting apoptosis. Transcriptome sequencing is performed on cells treated with low and high concentrations of WO3-x, and a series of key signals affecting cell proliferation and apoptosis are detected in differentially expressed genes, which indicates the research direction of nanotoxicity. The expression levels of key genes are also verified by quantitative PCR after cell treatment with different concentrations of WO3-x. This work fills the gap between the biocompatibility of nano WO3-x materials and molecular cytology and paves the way for investigating the mechanism and risks of oxygen vacancy in cancer therapy.

Resistance Modulation of Individual and Polymicrobial Culture of S. aureus and E. coli through Nanoparticle-Coupled Antibiotics

Polymicrobial mastitis is now becoming very common in dairy animals, resulting in exaggerated resistance to multiple antibiotics. The current study was executed to find drug responses in individual and mixed Culture of Staphylococcus aureus and Escherichia coli isolated from milk samples, as well as to evaluate the antibacterial potential of tungsten oxide nanoparticles. These isolates (alone and in mixed culture) were further processed for their responses to antibiotics using the disc diffusion method. On the other hand, tungsten oxide WO3 (W) nanoparticles coupled with antibiotics (ampicillin, A, and oxytetracycline, O) were prepared through the chemical method and characterized by X-ray diffraction, scanning electron microscopy (SEM), and UV-visible techniques. The preparations consisting of nanoparticles alone (W) and coupled with ampicillin (WA) and oxytetracycline (WO) were tested against individual and mixed Culture through the well diffusion and broth microdilution methods. The findings of the current study showed the highest resistance in E. coli was against penicillin (60%) and ampicillin (50%), while amikacin, erythromycin, ciprofloxacin, and oxytetracycline were the most effective antibiotics. S. aureus showed the highest resistance against penicillin (50%), oxytetracycline (40%), and ciprofloxacin (40%), while, except for ampicillin, the sensitive strains of S. aureus were in the range of 40-60% against the rest of antibiotics. The highest zones of inhibition (ZOI) against mixed Culture were shown by imipenem and ampicillin, whereas the highest percentage decrease in ZOI was noted in cases of ciprofloxacin (-240%) and gentamicin (-119.4%) in comparison to individual Culture of S. aureus and E. coli. It was noteworthy that the increase in ZOI was not more than 38% against mixed Culture as compared to the individual Culture. On the other hand, there was a significant reduction in the minimum inhibitory concentration (MIC) of nanoparticle-coupled antibiotics compared to nanoparticles alone for individual and mixed-culture bacteria, while MICs in the case of mixed Culture remained consistently high throughout the trial. This study therefore concluded that diverse drug resistance was present in both individual and mixed-culture bacteria, whereas the application of tungsten oxide nanoparticle-coupled antibiotics proved to be an effective candidate in reversing the drug resistance in bacterial strains.

Synergistic Antimicrobial Effect of Cold Atmospheric Plasma and Redox-Active Nanoparticles

Cold argon plasma (CAP) and metal oxide nanoparticles are well known antimicrobial agents. In the current study, on an example of Escherichia coli, a series of analyses was performed to assess the antibacterial action of the combination of these agents and to evaluate the possibility of using cerium oxide and cerium fluoride nanoparticles for a combined treatment of bacterial diseases. The joint effect of the combination of cold argon plasma and several metal oxide and fluoride nanoparticles (CeO2, CeF3, WO3) was investigated on a model of E. coli colony growth on agar plates. The mutagenic effect of different CAP and nanoparticle combinations on bacterial DNA was investigated, by means of a blue-white colony assay and RAPD-PCR. The effect on cell wall damage, using atomic force microscopy, was also studied. The results obtained demonstrate that the combination of CAP and redox-active metal oxide nanoparticles (RAMON) effectively inhibits bacterial growth, providing a synergistic antimicrobial effect exceeding that of any of the agents alone. The combination of CAP and CeF3 was shown to be the most effective mutagen against plasmid DNA, and the combination of CAP and WO3 was the most effective against bacterial genomic DNA. The analysis of direct cell wall damage by atomic force microscopy showed the combination of CAP and CeF3 to be the most effective antimicrobial agent. The combination of CAP and redox-active metal oxide or metal fluoride nanoparticles has a strong synergistic antimicrobial effect on bacterial growth, resulting in plasmid and genomic DNA damage and cell wall damage. For the first time, a strong antimicrobial and DNA-damaging effect of CeF3 nanoparticles has been demonstrated.

Anticancer Activity of Au/CNT Nanocomposite Fabricated by Nanosecond Pulsed Laser Ablation Method on Colon and Cervical Cancer

Gold nanoparticles (AuNPs) and carbon nanotubes (CNTs) are increasingly being investigated for cancer management due to their physicochemical properties, low toxicity, and biocompatibility. This study used an eco-friendly technique (laser synthesis) to fabricate AuNP and Au/CNT nanocomposites. AuNPs, Au/CNTs, and CNTs were tested as potential cancer nanotherapeutics on colorectal carcinoma cells (HCT-116) and cervical cancer cells (HeLa) using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay. In addition, the non-cancer embryonic kidney cells HEK-293 were taken as a control in the study. The cell viability assay demonstrated a significant reduction in cancer cell population post 48 h treatments of AuNPs, and Au/CNTs. The average cell viabilities of AuNPs, Au/CNTs, and CNTs for HCT-116 cells were 50.62%, 65.88%, 93.55%, and for HeLa cells, the cell viabilities were 50.88%, 66.51%, 91.73%. The cell viabilities for HEK-293 were 50.44%, 65.80%, 93.20%. Both AuNPs and Au/CNTs showed higher cell toxicity and cell death compared with CNT nanomaterials. The treatment of AuNPs and Au/CNTs showed strong inhibitory action on HCT-116 and HeLa cells. However, the treatment of CNTs did not significantly decrease HCT-116 and HeLa cells, and there was only a minor decrease. The treatment of AuNPs, and Au/CNTs, on normal HEK-293 cells also showed a significant decrease in cell viability, but the treatment of CNTs did not produce a significant decrease in the HEK-293 cells. This study shows that a simplified synthesis technique like laser synthesis for the preparation of high-purity nanomaterials has good efficacy for possible future cancer therapy with minimal toxicity.

WO3 Nanowire-Attached Reduced Graphene Oxide-Based 1D-2D Heterostructures for Near-Infrared Light-Driven Synergistic Photocatalytic and Photothermal Inactivation of Multidrug-Resistant Superbugs

The rapid emergence of superbugs which are resistant to existing antibiotics is becoming a huge global threat to public health, which demands the discovery of next-generation antibacterial agents for combating superbugs. Herein, we report the design of a two-dimensional (2D) reduced graphene oxide (r-GO) and one-dimensional (1D) WO₃ nanowire-based photothermal-photocatalytic heterostructure for combating multiantibiotic-resistant Salmonella DT104, carbapenem-resistant Enterobacteriaceae Escherichia coli, and methicillin-resistant Staphylococcus aureus superbugs. In the presence of near-infrared (NIR) light, due to the generation of electrons and holes, the WO₃-based heterostructure generates reactive oxygen species by photocatalytic reaction from water and oxygen, which kills superbugs. To enhance the photocatalytic superbug killing efficiency, r-GO has been used for suppressing the recombination of the photoinduced electron-hole pairs. Reported data show that NIR light-driven synergistic photocatalytic-photothermal processes can be used for 100% degradation of methylene blue using a heterostructure-based catalyst, and the photodegradation rate for the heterostructure is much better than the literature data for different types of WO₃/GO-based nanocomposites. Experimentally, time-dependent antibacterial efficiency data reveals that the heterostructure can destroy 100% superbugs within 30 min of light exposure via a synergistic photothermal and photocatalytic mechanism, whereas the WO₃ nanowire can kill around 35% superbugs only via photocatalytic action only and r-GO can kill 25% superbugs via photothermal action even after 30 min of exposure to light. Systematic time-dependent microscopy and spectroscopy studies reveal that the excellent antisuperbug activities for heterostructures are due to membrane damage, ATP, and DNA/RNA breakage. For possible real-life applications, sun light-based superbug inactivation shows 100% inactivation possible within 250 min of light exposure using 12 mg/mL heterostructures. The reported sun light-driven killing of superbugs provides a simple and versatile platform to combat drug-resistant superbugs.

Synthesis of Tungsten Oxide Nanoflakes and Their Antibacterial and Photocatalytic Properties

This current work revealed a single-step fabrication of tungsten oxide nanoflakes (WO3 NFs) with the help of Terminalia arjuna bark extract. Bioactive phytoconstituents of T. arjuna bark extract were involved in the nucleation process and promoted the material crystalline growth in a particular direction. The as-prepared sample thermal decomposition was analyzed by TG/DTG. The as-prepared sample was annealed at 300 °C for 2 h, and the annealed sample was characterized by UV-Vis-DRS, FTIR, Raman, XRD, SEM, EDX, and TEM. Synthesized WO3 samples showed a monoclinic phase of the flake-like structure with lengths of 25~230 nm and diameters of 25~120 nm. The WO3 NFs were evaluated against S. aureus and E. coli. Over 3 mg concentrations of WO3 NFs outperform the positive control in antibacterial activity. The pseudo-first-order kinetics of the WO3 NFs enhanced the photocatalytic performance of methylene blue (MB). These results prove that WO3 NFs have sustainable performance in antibacterial and MB degradation applications.

Tungsten-based Nanomaterials in the Biomedical Field: A Bibliometric Analysis of Research Progress and Prospects

Tungsten-based nanomaterials (TNMs) with diverse nanostructures and unique physicochemical properties have been widely applied in the biomedical field. Although various reviews have described the application of TNMs in specific biomedical fields, there are still no comprehensive studies that summarize and analyze research trends of the field as a whole. To identify and further promote the development of biomedical TNMs, a bibliometric analysis method is used to analyze all relevant literature on this topic. First, general bibliometric distributions of the dataset by year, country, institute, referenced source, and research hotspots are recognized. Next, a comprehensive review of the subjectively recognized research hotspots in various biomedical fields, including biological sensing, anticancer treatments, antibacterials, and toxicity evaluation, is provided. Finally, the prospects and challenges of TNMs are discussed to provide a new perspective for further promoting their development in biomedical research.

Structure and Photoluminescence of WO3-x Aggregates Tuned by Surfactants

The optoelectronic properties of transition metal oxide semiconductors depend on their oxygen vacancies, nanostructures and aggregation states. Here, we report the synthesis and photoluminescence (PL) properties of substoichiometric tungsten oxide (WO_3-x) aggregates with the nanorods, nanoflakes, submicro-spherical-like, submicro-spherical and micro-spherical structures in the acetic acid solution without and with the special surfactants (butyric or oleic acids). Based on theory on the osmotic potential of polymers, we demonstrate the structural change of the WO_3-x aggregates, which is related to the change of steric repulsion caused by the surfactant layers, adsorption and deformation of the surfactant molecules on the WO_3-x nanocrystals. The WO_3-x aggregates generate multi-color light, including ultraviolet, blue, green, red and near-infrared light caused by the inter-band transition and defect level-specific transition as well as the relaxation of polarons. Compared to the nanorod and nanoflake WO_3-x aggregates, the PL quenching of the submicro-spherical-like, submicro-spherical and micro-spherical WO_3-x aggregates is associated with the coupling between the WO_3-x nanoparticles and the trapping centers arising from the surfactant molecules adsorbed on the WO_3-x nanoparticles.

Photo-Stimuli-Responsive CuS Nanomaterials as Cutting-Edge Platform Materials for Antibacterial Applications

Photo-stimuli-responsive therapeutic nanomaterials have gained widespread attention as frontline materials for biomedical applications. The photoactivation strategies are classified as single-modality (based on either reactive oxygen species (ROS)-based photodynamic therapy (PDT), hyperthermia-based photothermal therapy (PTT)), or dual-modality (which combines PDT and PTT). Due to its minimal invasiveness, phototherapy has been extensively applied as an efficient therapeutic platform for many diseases, including skin cancers. However, extensive implementation of phototherapy to address the emergence of multidrug-resistant (MDR) bacterial infections remains challenging. This review focuses on copper sulfide (CuS) nanomaterials as efficient and cost-effective PDT and PTT therapeutic nanomaterials with antibacterial activity. The features and merits of CuS nanomaterials as therapeutics are compared to those of other nanomaterials. Control of the dimensions and morphological complexity of CuS nanomaterials through judicious synthesis is then introduced. Both the in vitro antibacterial activity and the in vivo therapeutic effect of CuS nanomaterials and derivative nanocomposites composed of 2D nanomaterials, polymers, metals, metal oxides, and proteins are described in detail. Finally, the perspective of photo-stimuli-responsive CuS nanomaterials for future clinical antibacterial applications is highlighted. This review illustrates that CuS nanomaterials are highly effective, low-toxic, and environmentally friendly antibacterial agents or platform nanomaterials for combatting MDR bacterial infections.

Development and Investigation of Photoactive WO3 Nanowire-Based Hybrid Membranes

Novel hybrid structures have attracted attention in several instances of scientific research and different technological applications in this decade due to their novel characteristics and wide range of applicability. Hybrid membranes with multiple components (three or more) are also increasingly used in water purification applications, and their ease of handling and reusability make them a promising candidate for the degradation of organic pollutants by photocatalysis. In this study, the preparation and characterization of tungsten trioxide nanowire (WO3 NW)-based hybrid membrane structures are reported. Furthermore, the adsorption properties and photocatalytic efficiency of the as-prepared membranes against methylene blue (MB) organic dye under UV irradiation is also presented. Characterization techniques, such as scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray powder diffraction (XRD) are performed to study the morphology and surface of the as-prepared hybrid membranes. The removal efficiency of the hybrid membranes against MB is 77% in a 120 min decomposition reaction. The enhanced value can be attributed to the hybrid structure of the membrane that enhances not only the adsorption capability, but also the photocatalytic performance. Based on the results obtained, it is hoped that hybrid membrane technology could be a promising candidate for future photocatalysis-based water treatment applications.

Optimization of the incubation parameters for biogenic synthesis of WO3 nanoparticles using Taguchi method

Green synthesis of metal nanoparticles is gathering attention due to eco-friendly processing. Tungsten oxide (WO₃) nanoparticles have immense applications as semiconductors, antimicrobials and photo thermal materials but their synthesis using biological systems is hitherto unpublicized. The paper discusses synthesis of WO₃ nanoparticles using Stenotrophomonas maltophilia and the optimization of physico-chemical parameters of incubation which influence the growth and metabolism of the bacterium and consequently the size of the WO₃ nanoparticles. The biogenic synthesis of WO₃ nanoparticles was confirmed by ATR-FTIR and X-ray diffraction analysis. Taguchi and analysis of variance method was applied to optimize the physico-chemical parameters (pH, temperature, time, aeration rate and concentration), considering particle size and poly dispersity index (PDI) of the nanoparticles as the experimental responses. Under the design of experiments technique, Taguchi's L27 array was selected to determine the optimal process parameters which could significantly reduce the particle size and PDI of WO₃ nanoparticles. Statistical analysis by signal-to-noise ratio, regression analysis and ANOVA (95% confidence level) on experimental responses confirmed pH and aeration as most influential while temperature and time as least influential parameters. pH 8, Temperature 40 °C, aeration 200 RPM, time 3 days and concentration of sodium tungstate at 1 mM (p3t3r3d3c1) was the most effective level and parameters combination for smallest particle size and PDI of WO₃ nanoparticles. Regression models developed for particle size and PDI exhibited a linear regression of 97.80% and 90.89% respectively, while the confirmation test validated the size and PDI of the experimental values against predicted results. SEM image of WO₃ nanoparticles illustrated the same particle size as that predicted, further validating the model. The study can be applied to optimize any process parameters in the industry or on biological systems.

Hydroxyapatite Decorated with Tungsten Oxide Nanoparticles: New Composite Materials against Bacterial Growth

The availability of biomaterials able to counteract bacterial colonization is one of the main requirements of functional implants and medical devices. Herein, we functionalized hydroxyapatite (HA) with tungsten oxide (WO₃) nanoparticles in the aim to obtain composite materials with improved biological performance. To this purpose, we used HA, as well as HA functionalized with polyacrilic acid (HAPAA) or poly(ethylenimine) (HAPEI), as supports and polyvinylpyrrolidone (PVP) as stabilizing agent for WO₃ nanoparticles. The number of nanoparticles loaded on the substrates was determined through Molecular Plasma-Atomic Emission Spectroscopy and is quite small, so it cannot be detected through X-ray diffraction analysis. It increases from HAPAA, to HA, to HAPEI, in agreement with the different values of zeta potential of the different substrates. HRTEM and STEM images show the dimensions of the nanoparticles are very small, less than 1 nm. In physiological solution HA support displays a greater tungsten cumulative release than HAPEI, despite its smaller loaded amount. Indeed, WO₃ nanoparticles-functionalized HA exhibits a remarkable antibacterial activity against the Gram-positive Staphylococcus aureus in absence of cytotoxicity, which could be usefully exploited in the biomedical field.

Ab Initio Computations of O and AO as well as ReO2, WO2 and BO2-Terminated ReO3, WO3, BaTiO3, SrTiO3 and BaZrO3 (001) Surfaces

We present and discuss the results of surface relaxation and rumpling computations for ReO3, WO3, SrTiO3, BaTiO3 and BaZrO3 (001) surfaces employing a hybrid B3LYP or B3PW description of exchange and correlation. In particular, we perform the first B3LYP computations for O-terminated ReO3 and WO3 (001) surfaces. In most cases, according to our B3LYP or B3PW computations for both surface terminations BO2- and O, AO-terminated ReO3, WO3, BaTiO3, SrTiO3 and BaZrO3 (001) surface upper layer atoms shift downwards, towards the bulk, the second layer atoms shift upwards and the third layer atoms, again, shift downwards. Our ab initio computes that ReO3, WO3, BaTiO3, SrTiO3 and BaZrO3 (001) surface Γ-Γ bandgaps are always smaller than their respective bulk Γ-Γ bandgaps. Our first principles compute that B-O atom chemical bond populations in the BaTiO3, SrTiO3 and BaZrO3 perovskite bulk are always smaller than near their BO2-terminated (001) surfaces. Just opposite, the Re-O and W-O chemical bond populations in the ReO3 (0.212e) and WO3 (0.142e) bulk are slightly larger than near the ReO2 and WO2-terminated ReO3 as well as WO3 (001) surfaces (0.170e and 0.108e, respectively).

Properties, optimized morphologies, and advanced strategies for photocatalytic applications of WO3 based photocatalysts

The development of WO₃ based photocatalysts has gained considerable attention across the world, especially in the realm of environmental remediation and energy production. WO₃ has a band gap of 2.5- 2.7 eV that falls under the visible region and is thus a potential candidate to utilize in various photocatalytic processes. As an earth-abundant metal oxide, WO₃ discovered in 1976 displayed excellent electronic and morphological properties, good stability, and enhanced photoactivity with diverse crystal phases. Also, it unveils non-toxicity, high stability in drastic conditions, biocompatibility, low cost, excellent hole mobility (10 cm² V^-1s^-1), and tunable band gap. This review provides a comprehensive overview of the different properties of WO₃ inclusive of crystallographic, electrical, optical, thermoelectrical, and ferroelectric properties. The different morphologies of WO₃ based on dimensions were obtained by adopting different fabrication methods including inspecting their effects on the efficiency of WO₃. Numerous strategies to construct an ideal photocatalyst such as engineering crystal facets, surface defects, doping, heterojunction formation explaining specifically type-II, Z-scheme, and S-scheme mechanisms with addition to carbonaceous based WO₃ nanocomposites are summed up to explore the photocatalytic performance. The typical application of WO₃ is deliberated in detail involving the role and efficiency of WO₃ in pollutant degradation, CO₂ photoreduction, and water splitting. Besides, other applications of WO₃ as gas-sensor, bio-sensor, decomposition of VOCs, heavy metals ions adsorption, and antimicrobial property are also included. Moreover, the numerous aspects responsible for the high efficiency of WO₃-based nanocomposites with their challenges, opportunities, and future aspects are summarized. Hopefully, this review may inspire researchers to explore new ideas to boost the production of clean energy for the next generation.

Healing Diabetic Ulcers with MoO3-X Nanodots Possessing Intrinsic ROS-Scavenging and Bacteria-Killing Capacities

Diabetic ulcers (DUs) appearing as chronic wounds are difficult to heal due to the oxidative stress in the wound microenvironment and their high susceptibility to bacterial infection. A routine treatment combining surgical debridement with anti-infection therapy is widely used for treating DUs in the clinic, but hardly offers a satisfying wound healing outcome. It is known that a long-term antibiotic treatment may also lead to the drug resistance of pathogens. To address these challenges, new strategies combining both reactive oxygen species (ROS) scavenging and bacterial sterilization have been proposed for fighting against DUs. Following this idea, oxygen deficient molybdenum-based nanodots (MoO_3-X ) for healing the DUs are reported. The ROS scavenging ability of MoO_3-X nanodots is investigated and the antibacterial property of the nanodots is also demonstrated. The systematic cell and animal experimental results indicate that the MoO_3-X nanodots can effectively reduce inflammation, promote epithelial cell regeneration, accelerate angiogenesis, and facilitate DUs recovery. Most importantly, they present excellent capacity to diminish infection of methicillin-resistant Staphylococcus aureus, manifesting the potent application prospect of MoO_3-X nanodots for diabetic wound therapy.

Tungsten oxide polymorphs and their multifunctional applications

Owing to the natural abundance, easy availability, high stability, non-stoichiometry, and chemical diversity, considerable interest has been devoted to tungsten oxide (WO_3-x) nanomaterials, and many advances have been achieved ranging from traditional catalysts and electronics to emerging artificial intelligence. This review focuses on recent progress of WO_3-x polymorphs and their multifunctional applications. The structural diversity and crystal phase transitions of WO_3-x and recent advances on the general synthesis of various WO_3-x nanostructures are first summarized, since the crystal structure and morphology adjustment obviously affect the physiochemical merits of WO_3-x materials. Then, their applications and related mechanisms in different fields are demonstrated, such as gas sensing, chromogenic (electro-, photo-, gaso-, and thermochromic), photocatalytic (pollutant degradation and water splitting), and emerging applications (biomedical, antibiotic, and artificial intelligence). With the advances highlighted here and the ongoing research efforts, the continuous breakthrough in functionalized WO_3-x nanostructure and their attractive applications is foreseeable in the future.

Fabrication of novel hybrid Z-Scheme WO3@g-C3N4@MWCNT nanostructure for photocatalytic degradation of tetracycline and the evaluation of antimicrobial activity

Exploring highly efficient visible-light-driven photocatalyst for the elimination organic pollutants is a great concern for constructing sustainable green energy systems. In the current work, a novel hybrid ternary WO₃@g-C₃N₄@MWCNT nanocomposites have been fabricated for visible-light-driven photocatalyst by self-assembly method. The as-prepared photocatalyst was examined by XRD, Raman, FESEM, HRTEM, XPS EDS, EIS, UV-visible DRS, and PL analysis. The experimental results revealed that the photocatalytic activity of WO₃@g-C₃N₄@MWCNT nanocomposites on the degradation of Tetracycline (TC) is 79.54% at 120 min, which is higher than the binary WO₃@g-C₃N₄ composite and pristine WO₃. The improved degradation performance towards TC is recognized for its higher surface area, intense light absorption towards the visible region, and enhanced charge separation efficiency. Consequently, the fabricated catalyst endows a promising application for antibiotic degradation.

Recyclable, Antibacterial, Isoporous Through-Hole Membrane Air Filters with Hydrothermally Grown ZnO Nanorods

Reusable, antibacterial, and photocatalytic isoporous through-hole air filtration membranes have been demonstrated based on hydrothermally grown ZnO nanorods (NRs). High-temperature (300~375 °C) stability of thermoset-based isoporous through-hole membranes has enabled concurrent control of porosity and seed formation via high-temperature annealing of the membranes. The following hydrothermal growth has led to densely populated ZnO NRs on both the membrane surface and pore sidewall. Thanks to the nanofibrous shape of the grown ZnO NRs on the pore sidewall, the membrane filters have shown a high (>97%) filtration efficiency for PM2.5 with a rather low-pressure (~80 Pa) drop. The membrane filters could easily be cleaned and reused many times by simple spray cleaning with a water/ethanol mixture solution. Further, the grown ZnO NRs have also endowed excellent bactericidal performance for both Gram-positive S. aureus and Gram-negative S. enteritidis bacteria. Owing to the wide bandgap semiconductor nature of ZnO NRs, organic decomposition by photocatalytic activity under UV illumination has been successfully demonstrated. The reusable, multifunctional membrane filters can find wide applications in air filtration and purification.

Plasmonic Oxygen Defects in MO3- x (M = W or Mo) Nanomaterials: Synthesis, Modifications, and Biomedical Applications

Nanomedicine is a promising technology with many advantages and provides exciting opportunities for cancer diagnosis and therapy. During recent years, the newly developed oxygen-deficiency transition metal oxides MO_{3- x} (M = W or Mo) have received significant attention due to the unique optical properties, such as strong localized surface plasmon resonance (LSPR) , tunable and broad near-IR absorption, high photothermal conversion efficiency, and large X-ray attenuation coefficient. This review presents an overview of recent advances in the development of MO_{3- x} nanomaterials for biomedical applications. First, the fundamentals of the LSPR effect are introduced. Then, the preparation and modification methods of MO_{3- x} nanomaterials are summarized. In addition, the biological effects of MO_{3- x} nanomaterials are highlighted and their applications in the biomedical field are outlined. This includes imaging modalities, cancer treatment, and antibacterial capability. Finally, the prospects and challenges of MO_{3- x} and MO_{3- x} -based nanomaterial for fundamental studies and clinical applications are also discussed.

Suitability of Iron (Fe)-Doped Tungsten Oxide (WO3) Nanomaterials for Photocatalytic and Antibacterial Applications

Pure and “Fe ([Formula: see text][Formula: see text]wt.%)-doped” WO[Formula: see text] nanoparticles were prepared by facile microwave irradiation method and that was investigated for strong photo catalytic and antibacterial activity applications for the first time. The primary aim of this work is to reveal the great importance of oxygen vacancies ([Formula: see text] due to dopant (Fe[Formula: see text] for photo catalytic and antibacterial activity applications. This work also discusses the contribution of oxygen vacancies and their dependence on surface area and phase formation which are of great research interest for water purification and biological sciences. Herein, pure and “Fe ([Formula: see text][Formula: see text]wt.%)-doped” WO[Formula: see text] nanoparticles were successfully synthesized by facile microwave irradiation (MWI) method (2.45 GHz/240W/10min) in ambient atmosphere. The phase formation and the crystalline nature of the prepared products were evaluated using powder X-ray diffraction (XRD). It confirmed the phase formation of orthorhombic and monoclinic phase formations for the pure (WO[Formula: see text]H2O) and annealed samples (W[Formula: see text]O[Formula: see text] and WO[Formula: see text], respectively. Optical behavior of the samples from UV-Vis diffuse reflectance analysis revealed that W[Formula: see text]O[Formula: see text] has remarkable bandgap values (1.96[Formula: see text]eV) that clearly emphasizes the transfer of oxygen ions which helps in the movement of oxygen vacancies inside the crystalline domain. The morphological nature of the prepared products was observed by FE-SEM analysis and the average dimension was found to be 0.2–3.2[Formula: see text][Formula: see text]m and 2–4[Formula: see text][Formula: see text]m for the pure and annealed products, respectively. The specific surface area from BET analysis explored that W[Formula: see text]O[Formula: see text] having 55.16[Formula: see text]m2g[Formula: see text] was found to be higher than that of commercially available WO3. The photocatalytic behavior of the prepared compounds morphologies was investigated via Rhodamine B (RhB) degradation under visible light irradiation. These results showed “Fe-doped” annealed WO3 nanoparticles have degradation efficiency of 86.9% along with high stable nature. On the other hand, to identify the suitability of the prepared products for antibacterial activity, the microbial strains of Gram-positive Bacillus sp. and Gram-negative strains of Pseudomonassp. and Salmonellasp. were used for the antimicrobial assay[Formula: see text] The results indicated that W[Formula: see text]O[Formula: see text] showed enhanced antibacterial nature when compared to that of Stoichiometry tungsten oxide (WO[Formula: see text] nanomaterials. From these observations, this work emphasizes the importance of oxygen vacancies for antibacterial activity applications.

Hydrothermal Generation of 3-Dimensional WO₃ Nanocubes, Nanobars and Nanobricks, Their Antimicrobial and Anticancer Properties

In our current endeavor, 3-dimensional (3D) tungsten oxide (WO₃) nanostructures (nanocubes, nanobars and nanobricks) have been swiftly generated via hydrothermal route at 160 °C for 24 h. Physico-chemical characterization of the resultant powder revealed formation of WO₃ nanostructures with predominantly faceted cube, brick and rectangular bar-like morphology. The present study was also aimed at exploring the antimicrobial and anticancer potential of WO₃ nanostructures. Antimicrobial activity was tested against different micro-organisms viz., Pseudomonas aeruginosa, Staphylococcus aureus, Klebsiella pneumoniae, Escherichia coli and Aspergillus fumigatus. The antibacterial and antifungal activity was ascertained against these micro-organisms by measuring the diameter of inhibition zone in agar well diffusion test which revealed that the resultant WO₃ nanostructures acted as excellent antibacterial agents against both bacteria and fungi but were more effective against the fungus, A. fumigatus. To examine the growth curves of bacterial cells, time kill assay was monitored for E. coli, against which significant antibacterial action of WO₃ nanostructures was noted. The anti-cancer activity of WO₃ nanostructures was found to be concentration-dependent against KB cell line by viable cell count method. In our pilot study, WO₃ nanostructures suspension with concentration in the range of 10^-1 to 10^-5 mg/ml was found to kill KB cells effectively.

Gram-scale selective synthesis of WO3-x nanorods and (NH4)xWO3 ammonium tungsten bronzes with tunable plasmonic properties

Localized surface plasmon resonance properties in unconventional materials like metal oxides or chalcogenide semiconductors have been studied for use in signal detection and analysis in biomedicine and photocatalysis. We devised a selective synthesis of the tungsten oxides WO_3-x and (NH₄)_xWO₃ with tunable plasmonic properties. We selectively synthesized WO_3-x nanorods with different aspect ratios and hexagonal tungsten bronzes (NH₄)_xWO₃ as truncated nanocubes starting from ammonium metatungstate (NH₄)₆H₂W₁₂O₄₀·xH₂O. Both particles form from the same nuclei at temperatures >200 °C; monomer concentration and surfactant ratio are essential variables for phase selection. (NH₄)_xWO₃ was the preferred reaction product only for fast heating rates (25 K min^-1), slow stirring speeds (∼150 rpm) and high precursor concentrations. A proton nuclear magnetic resonance (¹H-NMR) spectroscopic study of the reaction mechanism revealed that oleyl oleamide, formed from oleic acid and oleylamine upon heating, is a key factor for the selective formation of WO_3-x nanorods. Since oleic acid and oleylamine are standard surfactants for the wet chemical synthesis of many metal and oxide nanoparticles, the finding that oleyl oleamide acts as a chemically active reagent above 250 °C may have implications for many nanoparticle syntheses. Oriented attachment of polyoxotungstate anions is proposed as a model to rationalize phase selectivity. Magic angle spinning (MAS) ¹H-NMR and powder X-ray diffraction (PXRD) studies of the bronze after annealing under (non)inert conditions revealed an oxidative phase transition. WO_3-x and (NH₄)_xWO₃ show a strong plasmon absorption for near infra-red light between 800 and 3300 nm. The maxima of the plasmon bands shift systematically with the nanocrystal aspect ratio.

Antibacterial Activity of Polyvinyl Alcohol/WO3 Films Assisted by Near-Infrared Light and Its Application in Freshness Monitoring

Nowadays, films with antibacterial activity and applied for freshness monitoring by colorimetric response have been drawing growing attention in food packaging. However, the development of versatile antibacterial and colorimetric agents is still highly desirable. Herein, WO₃ nanorods are incorporated in a polyvinyl alcohol (PVA) matrix to develop a novel composite film with photothermal antibacterial activity and freshness monitoring faculty. The interaction between WO₃ nanorods and PVA is due to hydrogen bonds. Compared with the PVA film, the presence of WO₃ nanorods can significantly enhance the mechanical and barrier properties; typically, the target film (WO₃/PVA)₄ shows an increase in tensile strength by 52.7% and Young's modulus by 400.0% and a decrease in oxygen permeability by 72.4% and water vapor permeability by 66.9%. The films demonstrate a WO₃ content-dependent antibacterial activity. Under irradiation of near-infrared light (NIR808), the synergistic effect of physical damage, oxidative stress, and temperature increase markedly improves the antibacterial activity of (WO₃/PVA)₄, showing an antibacterial efficiency of ∼90% against Escherichia coli or beyond 90% against Staphylococcus aureus. The incorporated WO₃ nanorods demonstrate lower cytotoxicity toward the model cells of human colon cancer cell line HT-29. The (WO₃/PVA)₄ film exhibits colorimetric response to H₂S and can also be used for pork freshness monitoring as an indicator.

External and Internal Stimuli-Responsive Metallic Nanotherapeutics for Enhanced Anticancer Therapy

Therapeutic, diagnostic, and imaging approaches based on nanotechnology offer distinct advantages in cancer treatment. Various nanotherapeutics have been presented as potential alternatives to traditional anticancer therapies such as chemotherapy, radiotherapy, and surgical intervention. Notably, the advantage of nanotherapeutics is mainly attributable to their accumulation and targeting ability toward cancer cells, multiple drug-carrying abilities, combined therapies, and imaging approaches. To date, numerous nanoparticle formulations have been developed for anticancer therapy and among them, metallic nanotherapeutics reportedly demonstrate promising cancer therapeutic and diagnostic efficiencies owing to their dense surface functionalization ability, uniform size distribution, and shape-dependent optical responses, easy and cost-effective synthesis procedure, and multiple anti-cancer effects. Metallic nanotherapeutics can remodel the tumor microenvironment by changing unfavorable therapeutic conditions into therapeutically accessible ones with the help of different stimuli, including light, heat, ultrasound, an alternative magnetic field, redox, and reactive oxygen species. The combination of metallic nanotherapeutics with both external and internal stimuli can be used to trigger the on-demand release of therapeutic molecules, augmenting the therapeutic efficacies of anticancer therapies such as photothermal therapy, photodynamic therapy, magnetic hyperthermia, sonodynamic therapy, chemodynamic therapy, and immunotherapy. In this review, we have summarized the role of different metallic nanotherapeutics in anti-cancer therapy, as well as their combinational effects with multiple stimuli for enhanced anticancer therapy.

Phase transformation in tungsten oxide nanoplates as a function of post-annealing temperature and its electrochemical influence on energy storage

The morphology and crystal structure of electrode materials have an enormous impact on their electrochemical properties for employment in supercapacitors for various applications. In this study, the transformations of the crystal structure of WO₃·H₂O nanoplates were conducted by post-annealing at 200 °C and 400 °C. The morphological and structural evolution of the electrodes was studied via FEG-SEM, HRTEM, FTIR, XRD, and Raman spectroscopy. The phase transition and enhanced degree of crystallinity were observed with increasing temperature. The orthorhombic structures of the hydrate WO₃·H₂O (W80), the mixed-phase with mesoporous structure (W200), and finally the monoclinic phase of WO₃ structures (W400) were achieved at annealing temperatures of 80 °C, 200 °C, and 400 °C respectively. The electrochemical performance of electrode W200 showed the highest specific capacitance of 606 F g^-1 as compared to electrode W80 (361 F g^-1), and was two-fold greater than electrode W400 (302 F g^-1) at a current density of 1 A g^-1. Moreover, electrode W200 exhibited excellent cyclic stability of 89% at an ultrahigh scan rate of 100 mV s^-1 after 4000 cycles. The results highlight that the mixed-phase WO₃ nanoplates would make a suitable electrode material for supercapacitors with desired electrochemical features.

Light-Responsive Inorganic Biomaterials for Biomedical Applications

Light-responsive inorganic biomaterials are an emerging class of materials used for developing noninvasive, noncontact, precise, and controllable medical devices in a wide range of biomedical applications, including photothermal therapy, photodynamic therapy, drug delivery, and regenerative medicine. Herein, a range of biomaterials is discussed, including carbon-based nanomaterials, gold nanoparticles, graphite carbon nitride, transition metal dichalcogenides, and up-conversion nanoparticles that are used in the design of light-responsive medical devices. The importance of these light-responsive biomaterials is explored to design light-guided nanovehicle, modulate cellular behavior, as well as regulate extracellular microenvironments. Additionally, future perspectives on the clinical use of light-responsive biomaterials are highlighted.

Comparative Study of the Antimicrobial Effects of Tungsten Nanoparticles and Tungsten Nanocomposite Fibres on Hospital Acquired Bacterial and Viral Pathogens

A significant proportion of patients acquire hospital associated infections as a result of care within the NHS each year. Numerous antimicrobial strategies, such as antibiotics and surface modifications to medical facilities and instruments, have been devised in an attempt to reduce the incidence of nosocomial infections, but most have been proven unsuccessful and unsustainable due to antibiotic resistance. Therefore, the need to discover novel materials that can combat pathogenic microorganisms is ongoing. Novel technologies, such as the potential use of nanomaterials and nanocomposites, hold promise for reducing these infections in the fight against antimicrobial resistance. In this study, the antimicrobial activity of tungsten, tungsten carbide and tungsten oxide nanoparticles were tested against Escherichia coli, Staphylococcus aureus and bacteriophage T4 (DNA virus). The most potent nanoparticles, tungsten oxide, were incorporated into polymeric fibres using pressurised gyration and characterised using scanning electron microscopy and energy dispersive X-ray spectroscopy. The antimicrobial activity of tungsten oxide/polymer nanocomposite fibres was also studied. The results suggest the materials in this study promote mediation of the inhibition of microbial growth in suspension.

Tungsten Oxide Nanodots Exhibit Mild Interactions with WW and SH3 Modular Protein Domains

Tungsten oxide nanodot (WO_3-x ) is an active photothermal nanomaterial that has recently been discovered as a promising candidate for tumor theranostics and treatments. However, its potential cytotoxicity remains elusive and needs to be evaluated to assess its biosafety risks. Herein, we investigate the interactions between WO_3-x and two ubiquitous protein domains involved in protein-protein interactions, namely, WW and SH3 domains, using atomistic molecular dynamics simulations. Our results show that WO_3-x interacts only weakly with the key residues at the putative proline-rich motif (PRM) ligand-binding site of both domains. More importantly, our free energy landscape calculations reveal that the binding strength between WO_3-x and WW/SH3 is weaker than that of the native PRM ligand with WW/SH3, implying that WO_3-x has a limited inhibitory effect over PRM on both the WW and SH3 domains. These findings suggest that the cytotoxic effects of WO_3-x on the key modular protein domains could be very mild, which provides new insights for the future potential biomedical applications of this nanomaterial.

Investigation of Twenty Metal, Metal Oxide, and Metal Sulfide Nanoparticles' Impact on Differentiated Caco-2 Monolayer Integrity

The use of engineered nanomaterials (ENMs) in foods and consumer products is rising, increasing the potential for unintentional ingestion. While the cytotoxicity of many ENMs has been investigated, less attention has been given to adverse impact on the intestinal barrier integrity. Chronical disruption of gastrointestinal integrity can have far reaching health implications. Using fully differentiated Caco-2 cells, the perturbation of intestinal barrier function and cytotoxicity were investigated for 20 metal, metal oxide, and metal sulfide ENMs. Caco-2 cells were exposed to 50 μg/mL ENMs for 24 hours. ENM formulations were characterized at 0 and 24 hours, and In Vitro Sedimentation, Diffusion and Dosimetry Modeling was applied to calculate the effective dose of exposure during 24 hours. The apparent permeability coefficient (P_app) was determined for fluorescent labeled dextran (3,000 Da) and tight junction integrity was evaluated by immunofluorescence microscopy. Cytotoxicity was investigated by determining lactate dehydrogenase release (LDH) and cell metabolic activity (tetrazolium based MTS) assays. Four ENMs led to significantly increased P_app, (15.8% w/w% Ag-SiO₂ nanoparticle (NP), 60 nm CdS NP, 100 nm V₂O₅ flakes, and 50 nm ZnO NP), while one ENM (20 nm MgO NP) decreased P_app. With the exception of CdS NP, significantly increased P_app was not connected with cell cytotoxicity. The calculated effective dose concentration was not correlated with increased P_app. Our results illustrate that while many metal, metal oxide, and metal sulfide ENMs do not adversely affect monolayer integrity or induce cytotoxicity in differentiated Caco-2 cells, a subset of ENMs may compromise the intestinal integrity. This study demonstrated the use of differentiated Caco-2 monolayer and P_app as an endpoint to identify and prioritize ENMs that should be investigated further. The interaction between ENMs and the intestinal epithelium needs to be evaluated to understand potential intestinal barrier dysfunction and resulting health implications.

Photothermally active nanoparticles as a promising tool for eliminating bacteria and biofilms

Bacterial contamination is a severe issue that affects medical devices, hospital tools and surfaces. When microorganisms adhere to a surface (e.g., medical devices or implants) they can develop into a biofilm, thereby becoming more resistant to conventional biocides and disinfectants. Nanoparticles can be used as an antibacterial agent in medical instruments or as a protective coating in implantable devices. In particular, attention is being drawn to photothermally active nanoparticles that are capable of converting absorbed light into heat. These nanoparticles can efficiently eradicate bacteria and biofilms upon light activation (predominantly near the infrared to near-infrared spectral region) due a rapid and pronounced local temperature increase. By using this approach new, protective, antibacterial surfaces and materials can be developed that can be remotely activated on demand. In this review, we summarize the state-of-the art regarding the application of various photothermally active nanoparticles and their corresponding nanocomposites for the light-triggered eradication of bacteria and biofilms.