Cellulose-Based Ionic Conductor: An Emerging Material toward Sustainable Devices

Periodate oxidation-mediated nanocelluloses: Preparation, functionalization, structural design, and applications

In recent years, the remarkable progress in nanotechnology has ignited considerable interest in investigating nanocelluloses, an environmentally friendly and sustainable nanomaterial derived from cellulosic feedstocks. Current research primarily focuses on the preparation and applications of nanocelluloses. However, to enhance the efficiency of nanofibrillation, reduce energy consumption, and expand nanocellulose applications, chemical pre-treatments of cellulose fibers have attracted substantial interest and extensive exploration. Various chemical pre-treatment methods yield nanocelluloses with diverse functional groups. Among these methods, periodate oxidation has garnered significant attention recently, due to the formation of dialdehyde cellulose derived nanocellulose, which exhibits great promise for further modification with various functional groups. This review seeks to provide a comprehensive and in-depth examination of periodate oxidation-mediated nanocelluloses (PONCs), including their preparation, functionalization, hierarchical structural design, and applications. We believe that PONCs stand as highly promising candidates for the development of novel nano-cellulosic materials.

Nanocellulose-mediated bilayer hydrogel actuators with thermo-responsive, shape memory and self-sensing performances

Inspired by creatures, abundant stimulus-responsive hydrogel actuators with diverse functionalities have been manufactured for applications in soft robotics. However, constructing a shape memory and self-sensing bilayer hydrogel actuator with high mechanical strength and strong interfacial bonding still remains a challenge. Herein, a novel bilayer hydrogel with a stimulus-responsive TEMPO-oxidized cellulose nanofibers/poly(N-isopropylacrylamide) (TOCN/PNIPAM) layer and a non-responsive TOCN/polyacrylamide (TOCN/PAM) layer is proposed as a thermosensitive actuator. TOCNs as a nano-reinforced phase provide a high mechanical strength and endow the hydrogel actuator with a strong interfacial bonding. Due to the incorporation of TOCNs, the TOCN/PNIPAM hydrogel exhibits a high compressive strength (~89.2 kPa), elongation at break (~170.7 %) and tensile strength (~24.0 kPa). The prepared PNIPAM/TOCN/PAM hydrogel actuator performs the roles of an encapsulation, jack, temperature-controlled fluid valve and temperature-control manipulator. The incorporation of Fe3+ further endows the bilayer hydrogel actuator with a synergistic performance of shape memory and temperature-driven, which can be used as a temperature-responsive switch to detect ambient temperature. The PNIPAM/TOCN/PAM-Fe3+ conductive hydrogel can be assembled into a flexible sensor and generate sensing signals when driven by temperature changes to achieve real-time feedback. This research may lead to new insights into the design and manufacturing of intelligent flexible soft robots.

A processable ionogel with thermo-switchable conductivity

We report an ionogel with thermo-switchable conductivity and high processability based on physical self-assembly of poly(styrene-b-ethylene oxide-b-styrene) (PS-PEO-PS) in mixed ionic liquids composed of thermo-responsive 1,3-dimethylimidazolium bis(trifluoromethanesulfonyl)imide and polymerizable 1-(4-vinylbenzyl)-3-butylimidazolium bis(trifluoromethylsulfonyl)imide, and subsequent chemical crosslinking of the polymerizable component.

Soft Actuators and Actuation: Design, Synthesis, and Applications

Soft actuators are one of the most promising technological advancements with potential solutions to diverse fields' day-to-day challenges. Soft actuators derived from hydrogel materials possess unique features such as flexibility, responsiveness to stimuli, and intricate deformations, making them ideal for soft robotics, artificial muscles, and biomedical applications. This review provides an overview of material composition and design techniques for hydrogel actuators, exploring 3D printing, photopolymerization, cross-linking, and microfabrication methods for improved actuation. It examines applications of hydrogel actuators in biomedical, soft robotics, bioinspired systems, microfluidics, lab-on-a-chip devices, and environmental, and energy systems. Finally, it discusses challenges, opportunities, advancements, and regulatory aspects related to hydrogel actuators.

Ultra-stretchable, adhesive, fatigue resistance, and anti-freezing conductive hydrogel based on gelatin/guar gum and liquid metal for dual-sensory flexible sensor and all-in-one supercapacitors

Benefiting from the tissue-like mechanical properties, conductive hydrogels have emerged as a promising candidate for manufacturing wearable electronics. However, the high water content within hydrogels will inevitably freeze at subzero temperature, causing a degradation or loss of functionality, which severely prevent their practical application in wearable electronics. Herein, an anti-freezing hydrogel integrating high conductivity, superior stretchability, and robust adhesion was fabricated by dissolving choline chloride and gallium in gelatin/guar gum network using borax as the cross-linker. Based on the synergistic effect of dynamic borate ester bonds and hydrogen bonds, the hydrogel exhibited rapid self-healing property and excellent fatigue resistance. Profiting from these fascinating characteristics, the hydrogel was assembled as strain sensor to precisely detect various human activities with high strain sensitivity and fast response time. Meanwhile, the hydrogel was demonstrated high sensitivity and rapid response to temperature, which can be used as thermal sensor to monitor temperature. Moreover, the conductive hydrogel was encapsulated into supercapacitors with high areal capacitance and favorable cycle stability. Importantly, the flexible sensor and supercapacitors still maintain stable sensing performance and good electrochemical performance even at subzero temperature. Therefore, our work broaden hydrogels application in intelligent wearable devices and energy storage in extreme environments.

Effect of hornification on the isolation of anionic cellulose nanofibrils from Kraft pulp via maleic anhydride esterification

Cellulose nanofibrils (CNF) isolation based on a catalyst-free maleic anhydride esterification has proven to be effective, however, the effects of pulp hornification on CNF isolation by this strategy have yet to be explored, which could present significant impacts for CNF isolation. Herein, dried northern bleached softwood Kraft pulp (D-NBSK) and never-dried northern bleached softwood Kraft pulp (ND-NBSK) were selected as the substrates. After esterification with maleic anhydride (MA), the esterified ND-NBSK pulp (E-ND) shows a significantly smaller size and more fragmented structure than the esterified D-NBSK pulp (E-D). Meanwhile, higher degree of esterification can be realized for the never dried pulp as compared to the dried pulp, which is corroborated by the significantly stronger characteristic peaks of CO (1720 cm-1) and -COO- (1575 cm-1) from the FTIR spectra and the higher surface charge content (0.86 ± 0.04 mmol/g vs. 0.55 ± 0.05 mmol/g). A comparison of the characteristics of the resulting CNF similarly demonstrated the negative impact of hornification. Overall, this work indicates that hornification tends to reduce the accessibility of chemical reagents to the pulp, leading to insufficient deconstruction. Such negative impact of hornification should be considered when performing nanocellulose isolation, especially when using pulp as feedstock.

Gel polymer electrolytes for rechargeable batteries toward wide-temperature applications

Rechargeable batteries, typically represented by lithium-ion batteries, have taken a huge leap in energy density over the last two decades. However, they still face material/chemical challenges in ensuring safety and long service life at temperatures beyond the optimum range, primarily due to the chemical/electrochemical instabilities of conventional liquid electrolytes against aggressive electrode reactions and temperature variation. In this regard, a gel polymer electrolyte (GPE) with its liquid components immobilized and stabilized by a solid matrix, capable of retaining almost all the advantageous natures of the liquid electrolytes and circumventing the interfacial issues that exist in the all-solid-state electrolytes, is of great significance to realize rechargeable batteries with extended working temperature range. We begin this review with the main challenges faced in the development of GPEs, based on extensive literature research and our practical experience. Then, a significant section is dedicated to the requirements and design principles of GPEs for wide-temperature applications, with special attention paid to the feasibility, cost, and environmental impact. Next, the research progress of GPEs is thoroughly reviewed according to the strategies applied. In the end, we outline some prospects of GPEs related to innovations in material sciences, advanced characterizations, artificial intelligence, and environmental impact analysis, hoping to spark new research activities that ultimately bring us a step closer to realizing wide-temperature rechargeable batteries.

Facile dissolution of cellulose by superbase-derived ionic liquid using organic solvents as co-solvents at mild temperatures

Dissolving cellulose at low temperatures is a key step in its efficient utilization as a renewable resource to produce high-value-added platform chemicals and high-performance materials. Here, the potential of four aprotic organic solvents was investigated for use as co-solvents with a sustainable DBU-derived ionic liquid (SIL) for the low-temperature dissolution and regeneration of cellulose. Combined experiments, density functional theory calculations, and molecular dynamic simulations were performed. The type and amount of co-solvent were found to have a significant impact on the solubility of cellulose, the dissolution process, and the structure of regenerated cellulose. The addition of organic solvents can significantly reduce the cellulose dissolution temperature and increase the solubility. Among the solvents assessed, 40 wt% DMSO exhibited the most effective synergistic interaction with SIL, where the solubility of cellulose was 14.6 wt% at 75 °C. Subsequently, the effects of the different types and amounts of co-solvents on the microscopic morphology and chemical structure of regenerated cellulose were thoroughly explored. The results showed that different types of organic solvents had different effects on the microstructure of regenerated cellulose. The results may guide the manufacturing specifications of high-performance regenerated fiber materials.

Recent Advances in Biopolymer-Based Hydrogel Electrolytes for Flexible Supercapacitors

Growing concern regarding the impact of fossil fuels has led to demands for the development of green and renewable materials for advanced electrochemical energy storage devices. Biopolymers with unique hierarchical structures and physicochemical properties, serving as an appealing platform for the advancement of sustainable energy, have found widespread application in the gel electrolytes of supercapacitors. In this Review, we outline the structure and characteristics of various biopolymers, discuss the proposed mechanisms and assess the evaluation metrics of gel electrolytes in supercapacitor devices, and further analyze the roles of biopolymer materials in this context. The state-of-the-art electrochemical performance of biopolymer-based hydrogel electrolytes for supercapacitors and their multiple functionalities are summarized, while underscoring the current technical challenges and potential solutions. This Review is intended to offer a thorough overview of recent developments in biopolymer-based hydrogel electrolytes, highlighting research concerning green and sustainable energy storage devices and potential avenues for further development.

Current Trends and Perspectives of Polymers in Batteries

This Perspective aims to present the current status and future opportunities for polymer science in battery technologies. Polymers play a crucial role in improving the performance of the ubiquitous lithium ion battery. But they will be even more important for the development of sustainable and versatile post-lithium battery technologies, in particular solid-state batteries. In this article, we identify the trends in the design and development of polymers for battery applications including binders for electrodes, porous separators, solid electrolytes, or redox-active electrode materials. These trends will be illustrated using a selection of recent polymer developments including new ionic polymers, biobased polymers, self-healing polymers, mixed-ionic electronic conducting polymers, inorganic-polymer composites, or redox polymers to give some examples. Finally, the future needs, opportunities, and directions of the field will be highlighted.

Cellulose-reinforced highly stretchable and adhesive eutectogels as efficient sensors

A cellulose-reinforced eutectogel was constructed by deep eutectic solvent (DES) and cotton linter cellulose. Cellulose was dispersed in the ternary DES consisting of acrylic acid, choline chloride and AlCl3·6H2O. The photoinitiator was then introduced into the system to in situ polymerize acrylic acid monomer to form transparent and ionic conductive eutectogels while keeping all the DES. The crosslinks formed by Al3+ induced ionic bonds and reversible links formed by hydrogen bonds give the eutectogels high stretchability (3200 ± 200 % tensile strain), self-adhesive (52.1 kPa to glass), self-healing and good mechanical strength (670 kPa). The eutectogels were assembled into sensors and epidermal patch electrodes that demonstrated high quality human motion sensing and physiological signal detection (electrocardiogram and electromyography). This work provides a facile way to design flexible electronics for sensing.

Highly transparent sustainable biogel electrolyte based on cellulose acetate for application in electrochemical devices

In this study, an easy and low-cost production method for a cellulose acetate-based gel polymer containing lithium perchlorate and propylene carbonate is described, as well as the investigation of its properties for potential use as an electrolyte in electrochemical devices. Cellulose acetate, a biopolymer derived from natural matrix, is colourless and transparent, as confirmed by the UV-Vis spectroscopy, with 85 % transparency in visible spectrum. The gels were prepared and tested at different concentrations and proportions to optimise their properties. Thermogravimetry, XRD, and FTIR analyses revealed crucial characteristics, including a substantial 90 % mass loss between 150 and 250 °C, a semi-crystalline nature with complete salt dissociation within the polymer matrix, and a decrease in intensity at 1780 cm-1 with increasing Li+ ion concentration, suggesting an improvement in ionic conduction capacity. In terms of electrochemical performance, the gel containing 10 % by mass of cellulose acetate and 1.4 M of LiClO4 emerged as the most promising. It exhibited a conductivity of 2.3 × 10-4 S.cm-1 at 25 °C and 3.0 × 10-4 S.cm-1 at 80 °C. Additionally, it demonstrated an ideal shape of cyclic voltammetry curves and stability after 400 cycles, establishing its suitability as an electrolyte in electrochemical devices.

Self-Healing and Wide Temperature-Tolerant Cellulose-Based Eutectogels for Reversible Humidity Detection

A kind of ionic conductive gel (also named eutectogel) is developed from an inorganic salt (ZnCl2)-based deep eutectic solvent (DES). The ternary DES consists of ZnCl2, acrylic acid, and water, and cotton linter cellulose is introduced into the DES system to tailor its mechanical and conductive properties. Enabled by the extensive hydrogen bonds and ion-dipole interactions, the obtained eutectogel displays superior ionic conductivity (0.33 S/m), high stretchability (up to 2050%), large tensile strength (1.82 MPa), and wide temperature tolerance (-40 to 60 °C). In particular, the water-induced coordination interactions can tune the strength of hydrogen/ionic bonds in the eutectogels, imparting them with appealing humidity sensing ability in complex and extreme conditions.

Study on the Rectification of Ionic Diode Based on Cross-Linked Nanocellulose Bipolar Membranes

Nanocellulose-based membranes have attracted intense attention in bioelectronic devices due to their low cost, flexibility, biocompatibility, degradability, and sustainability. Herein, we demonstrate a flexible ionic diode using a cross-linked bipolar membrane fabricated from positively and negatively charged cellulose nanofibrils (CNFs). The rectified current originates from the asymmetric charge distribution, which can selectively determine the direction of ion transport inside the bipolar membrane. The mechanism of rectification was demonstrated by electrochemical impedance spectroscopy with voltage biases. The rectifying behavior of this kind of ionic diode was studied by using linear sweep voltammetry to obtain current-voltage characteristics and the time dependence of the current. In addition, the performance of cross-linked CNF diodes was investigated while changing parameters such as the thickness of the bipolar membranes, the scanning voltage range, and the scanning rate. A good long-term stability due to the high density cross-linking of the diode was shown in both current-voltage characteristics and the time dependence of current.

Bottom-Up Magnesium Deposition Induced by Paper-Based Triple-Gradient Scaffolds toward Flexible Magnesium Metal Batteries

The development of advanced magnesium metal batteries (MMBs) has been hindered by longstanding challenges, such as the inability to induce uniform magnesium (Mg) nucleation and the inefficient utilization of Mg foil. This study introduces a novel solution in the form of a flexible, lightweight, paper-based scaffold that incorporates gradient conductivity, magnesiophilicity, and pore size. This design is achieved through an industrially adaptable papermaking process in which the ratio of carboxylated multi-walled carbon nanotubes to softwood cellulose fibers is meticulously adjusted. The triple-gradient structure of the scaffold enables the regulation of Mg ion flux, promoting bottom-up Mg deposition. Owing to its high flexibility, low thickness, and reduced density, the scaffold has potential applications in flexible and wearable electronics. Accordingly, the triple-gradient electrodes exhibit stable operation for over 1200 h at 3 mA cm-2 /3 mAh cm-2 in symmetrical cells, markedly outperforming the non-gradient and metallic Mg alternatives. Notably, this study marks the first successful fabrication of a flexible MMB pouch full cell, achieving an impressive volumetric energy density of 244 Wh L-1 . The simplicity and scalability of the triple-gradient design, which uses readily available materials through an industrially compatible papermaking process, open new doors for the production of flexible, high-energy-density metal batteries.

Promising cellulose-based functional gels for advanced biomedical applications: A review

Novel biomedical materials provide a new horizon for the diagnosis/treatment of diseases and tissue repair in medical engineering. As the most abundant biomass polymer on earth, cellulose is characterized by natural biocompatibility, good mechanical properties, and structure-performance designability. Owing to these outstanding features, cellulose as a biomacromolecule can be designed as functional biomaterials via hydrogen bonding (H-bonding) interaction or chemical modification for human tissue repair, implantable tissue organs, and controlling drug release. Moreover, cellulose can also be used to construct medical sensors for monitoring human physiological signals. In this study, the structural characteristics, functionalization approaches, and advanced biomedical applications of cellulose are reviewed. The current status and application prospects of cellulose and its functional materials for wound dressings, drug delivery, tissue engineering, and electronic skin (e-skin) are discussed. Finally, the key technologies and methods used for designing cellulosic biomaterials and broadening their application prospects in biomedical fields are highlighted.

Enabling Further Organic Electrolyte Infiltration of Cellulose-Based Separators via Defect-Rich Polypyrrole Modification for High Sodium Ion Transport in Sodium Metal Batteries

Sodium metal batteries (SMBs) have high-density and cost-effective characteristics as one of the energy storage systems, but uncontrollable dendrite growth and poor rate performance still hinder their practical applications. Herein, a nitrogen-rich modified cellulose separator with released abundant ion transport tunnels in organic electrolyte was synthesized by in situ polymerization of polypyrrole, which is based on the high permeability of cellulose in aqueous solution and the interfacial interaction between cellulose and polypyrrole. Meanwhile, the introduction of abundant structural defects such as branch chains, oxygen-containing functional groups, and imine-like structure to disrupt polypyrrole conjugation enables the utilization of conductive polymers in composite separator applications. With the electrolyte affinity surface on, the modified separator exhibits reinforced electrolyte uptake (254%) and extended electrolyte wettability, thereby leading to accelerated ionic conductivity (2.77 mS cm-1) and homogeneous sodium deposition by facilitating the establishment of additional pathways for ion transport. Benefiting from nitrogen-rich groups, the polypyrrole-modified separator demonstrates selective Na+ transport by the data of improved Na+ transference number (0.62). Owing to the above advantages, the battery assembled with the modified separators exhibits outstanding rate performance and prominent capacity retention two times that of the pristine cellulose separator at a high current density under the condition of fluorine-free electrolyte.

Highly Strong, Tough, and Cryogenically Adaptive Hydrogel Ionic Conductors via Coordination Interactions

Despite the promise of high flexibility and conformability of hydrogel ionic conductors, existing polymeric conductive hydrogels have long suffered from compromises in mechanical, electrical, and cryoadaptive properties due to monotonous functional improvement strategies, leading to lingering challenges. Here, we propose an all-in-one strategy for the preparation of poly(acrylic acid)/cellulose (PAA/Cel) hydrogel ionic conductors in a facile yet effective manner combining acrylic acid and salt-dissolved cellulose, in which abundant zinc ions simultaneously form strong coordination interactions with the two polymers, while free solute salts contribute to ionic conductivity and bind water molecules to prevent freezing. Therefore, the developed PAA/Cel hydrogel simultaneously achieved excellent mechanical, conductive, and cryogenically adaptive properties, with performances of 42.5 MPa for compressive strength, 1.6 MPa for tensile strength, 896.9% for stretchability, 9.2 MJ m-3 for toughness, 59.5 kJ m-2 for fracture energy, and 13.9 and 6.2 mS cm-1 for ionic conductivity at 25 and -70 °C, respectively. Enabled by these features, the resultant hydrogel ionic conductor is further demonstrated to be assembled as a self-powered electronic skin (e-skin) with high signal-to-noise ratio for use in monitoring movement and physiological signals regardless of cold temperatures, with hinting that could go beyond high-performance hydrogel ionic conductors.

The Critical Roles of Water in the Processing, Structure, and Properties of Nanocellulose

The cellulose industry depends heavily on water owing to the hydrophilic nature of cellulose fibrils and its potential for sustainable and innovative production methods. The emergence of nanocellulose, with its excellent properties, and the incorporation of nanomaterials have garnered significant attention. At the nanoscale level, nanocellulose offers a higher exposure of hydroxyl groups, making it more intimate with water than micro- and macroscale cellulose fibers. Gaining a deeper understanding of the interaction between nanocellulose and water holds the potential to reduce production costs and provide valuable insights into designing functional nanocellulose-based materials. In this review, water molecules interacting with nanocellulose are classified into free water (FW) and bound water (BW), based on their interaction forces with surface hydroxyls and their mobility in different states. In addition, the water-holding capacity of cellulosic materials and various water detection methods are also discussed. The review also examines water-utilization and water-removal methods in the fabrication, dispersion, and transport of nanocellulose, aiming to elucidate the challenges and tradeoffs in these processes while minimizing energy and time costs. Furthermore, the influence of water on nanocellulose properties, including mechanical properties, ion conductivity, and biodegradability, are discussed. Finally, we provide our perspective on the challenges and opportunities in developing nanocellulose and its interplay with water.

Microfluidic-Assembled Covalent Organic Frameworks@Ti3 C2 Tx MXene Vertical Fibers for High-Performance Electrochemical Supercapacitors

The delicate design of innovative and sophisticated fibers with vertical porous skeleton and eminent electrochemical activity to generate directional ionic pathways and good faradic charge accessibility is pivotal but challenging for realizing high-performance fiber-shaped supercapacitors (FSCs). Here, hierarchically ordered hybrid fiber combined vertical-aligned and conductive Ti3 C2 Tx MXene (VA-Ti3 C2 Tx ) with interstratified electroactive covalent organic frameworks LZU1 (COF-LZU1) by one-step microfluidic synthesis is developed. Due to the incorporation of vertical channels, abundant redox active sites and large accessible surface area throughout the electrode, the VA-Ti3 C2 Tx @COF-LZU1 fibers express exceptional gravimetric capacitance of 787 F g-1 in a three-electrode system. Additionally, the solid-state asymmetric FSCs deliver a prominent energy density of 27 Wh kg-1 , capacitance of 398 F g-1 and cycling life of 20 000 cycles. The key to high energy storage ability originates from the decreased ions adsorption energy and ameliorative charge density distribution in vertically aligned and active hybrid fiber, accelerating ions transportation/accommodation and interfacial electrons transfer. Benefiting from excellent electrochemical performance, the FSCs offer sufficient energy supply to power watches, flags, and digital display tubes as well as be integrated with sensors to detect pulse signals, which opens a promising route for architecting advanced fiber toward the carbon neutrality market beyond energy-storage technology.

Cellulose-Based Conductive Materials for Energy and Sensing Applications

Cellulose-based conductive materials (CCMs) have emerged as a promising class of materials with various applications in energy and sensing. This review provides a comprehensive overview of the synthesis methods and properties of CCMs and their applications in batteries, supercapacitors, chemical sensors, biosensors, and mechanical sensors. Derived from renewable resources, cellulose serves as a scaffold for integrating conductive additives such as carbon nanotubes (CNTs), graphene, metal particles, metal-organic frameworks (MOFs), carbides and nitrides of transition metals (MXene), and conductive polymers. This combination results in materials with excellent electrical conductivity while retaining the eco-friendliness and biocompatibility of cellulose. In the field of energy storage, CCMs show great potential for batteries and supercapacitors due to their high surface area, excellent mechanical strength, tunable chemistry, and high porosity. Their flexibility makes them ideal for wearable and flexible electronics, contributing to advances in portable energy storage and electronic integration into various substrates. In addition, CCMs play a key role in sensing applications. Their biocompatibility allows for the development of implantable biosensors and biodegradable environmental sensors to meet the growing demand for health and environmental monitoring. Looking to the future, this review emphasizes the need for scalable synthetic methods, improved mechanical and thermal properties, and exploration of novel cellulose sources and modifications. Continued innovation in CCMs promises to revolutionize sustainable energy storage and sensing technologies, providing environmentally friendly solutions to pressing global challenges.

Lignocellulose-Based Optical Biofilter with High Near-Infrared Transmittance via Lignin Capturing-Fusing Approach

Near-infrared (NIR) transparent optical filters show great promise in night vision and receiving windows. However, NIR optical filters are generally prepared by laborious, environmentally unfriendly processes that involve metal oxides or petroleum-based polymers. We propose a lignin capturing-fusing approach to manufacturing optical biofilters based on molecular collaboration between lignin and cellulose from waste agricultural biomass. In this process, lignin is captured via self-assembly in a cellulose network; then, the lignin is fused to fill gaps and hold the cellulose fibers tightly. The resulting optical biofilter featured a dense structure and smooth surface with NIR transmittance of ~90%, ultralow haze of close to 0%, strong ultraviolet-visible light blocking (~100% at 400 nm and 57.58% to 98.59% at 550 nm). Further, the optical biofilter has comprehensive stability, including water stability, solvent stability, thermal stability, and environmental stability. Because of its unique properties, the optical biofilter demonstrates potential applications in the NIR region, such as an NIR-transmitting window, NIR night vision, and privacy protection. These applications represent a promising route to produce NIR transparent optical filters starting from lignocellulose biomass waste.