Soft X-ray Absorption Spectroscopy of Liquids and Solutions

Generation and applications of x-ray and extreme ultraviolet beams carrying orbital angular momentum

In addition to spin angular momentum, light can carry orbital angular momentum. The orbital angular momentum degree of freedom in the extreme ultraviolet and x-ray regimes enables fundamental studies of light-matter interactions and new methods to study materials. Advances in x-ray optics, as well as undulator radiation and high harmonic generation techniques, lead to the creation of beams with non-trivial phase structure, such as a helical phase structure, creating new possibilities for the use of extreme ultraviolet and x-ray photons with orbital angular momentum in probing complex electronic structures in matter. In this article, we review the generation and applications of orbital angular momentum beams in the x-ray and extreme ultraviolet regime. We discuss several recent works that exploit the orbital angular momentum degree of freedom and showcase the potential advantages of using these beams.

In situ/Operando Synchrotron Radiation Analytical Techniques for CO2/CO Reduction Reaction: From Atomic Scales to Mesoscales

Electrocatalytic carbon dioxide/carbon monoxide reduction reaction (CO(2)RR) has emerged as a prospective and appealing strategy to realize carbon neutrality for manufacturing sustainable chemical products. Developing highly active electrocatalysts and stable devices has been demonstrated as effective approach to enhance the conversion efficiency of CO(2)RR. In order to rationally design electrocatalysts and devices, a comprehensive understanding of the intrinsic structure evolution within catalysts and micro-environment change around electrode interface, particularly under operation conditions, is indispensable. Synchrotron radiation has been recognized as a versatile characterization platform, garnering widespread attention owing to its high brightness, elevated flux, excellent directivity, strong polarization and exceptional stability. This review systematically introduces the applications of synchrotron radiation technologies classified by radiation sources with varying wavelengths in CO(2)RR. By virtue of in situ/operando synchrotron radiationanalytical techniques, we also summarize relevant dynamic evolution processes from electronic structure, atomic configuration, molecular adsorption, crystal lattice and devices, spanning scales from the angstrom to the micrometer. The merits and limitations of diverse synchrotron characterization techniques are summarized, and their applicable scenarios in CO(2)RR are further presented. On the basis of the state-of-the-art fourth-generation synchrotron facilities, a perspective for further deeper understanding of the CO(2)RR process using synchrotron radiation analytical techniques is proposed.

The mechanism of water oxidation using transition metal-based heterogeneous electrocatalysts

The water oxidation reaction, a crucial process for solar energy conversion, has garnered significant research attention. Achieving efficient energy conversion requires the development of cost-effective and durable water oxidation catalysts. To design effective catalysts, it is essential to have a fundamental understanding of the reaction mechanisms. This review presents a comprehensive overview of recent advancements in the understanding of the mechanisms of water oxidation using transition metal-based heterogeneous electrocatalysts, including Mn, Fe, Co, Ni, and Cu-based catalysts. It highlights the catalytic mechanisms of different transition metals and emphasizes the importance of monitoring of key intermediates to explore the reaction pathway. In addition, advanced techniques for physical characterization of water oxidation intermediates are also introduced, for the purpose of providing information for establishing reliable methodologies in water oxidation research. The study of transition metal-based water oxidation electrocatalysts is instrumental in providing novel insights into understanding both natural and artificial energy conversion processes.

Simulating X-ray Absorption Spectroscopy in Challenging Environments: Methodological Insights from Water-Solvated Ammonia and Ammonium Systems

Core-electron excitations in solvated systems, influenced by solvent geometry and hydrogen bonding, make X-ray absorption spectroscopy (XAS) a valuable tool for assessing solvent-solute interactions. However, calculating XAS spectra with electronic-structure methods has proven challenging due to a delicate interplay between correlation and solvation effects. This study provides a computational procedure for XAS modeling in solvated systems, with water-solvated ammonia and ammonium systems serving as probes. Exploring methodological challenges, we investigate explicit embedding models, specifically the polarizable embedding family, including polarizable density embedding and extended polarizable density embedding. Our linear-response time-dependent density functional theory (LR-TDDFT) XAS calculations reveal the efficiency of this approach, with extended polarizable density embedding emerging as a robust improvement over polarizable density embedding. Contrary to some recent literature, our study challenges the belief that LR-TDDFT cannot accurately describe XAS spectra of ammonia and ammonium solvated in water.

Mechanism of poly(N-isopropylacrylamide) cononsolvency in aqueous methanol solutions explored via oxygen K-edge X-ray absorption spectroscopy

The cononsolvency mechanism of poly(N-isopropylacrylamide) (PNIPAM), dissolving in pure methanol (MeOH) and water (H2O) but being insoluble in MeOH-H2O mixtures, was investigated by O K-edge X-ray absorption spectroscopy (XAS). The cononsolvency emerges from the aggregation of PNIPAM with MeOH clusters, leading to the collapse of the hydrophobic hydration of PNIPAM.

Probing Isolated Water Molecules in Aqueous Acetonitrile Solutions Using Oxygen K-Edge X-ray Absorption Spectroscopy

Oxygen K-edge X-ray absorption spectroscopy (XAS) of an aqueous acetonitrile solution exhibited a sharp peak at approximately 537 eV, which was similar to that of water vapor and was not observed in liquid water. The inner-shell spectra of isolated water molecules and water clusters of different sizes surrounded by acetonitrile molecules were obtained by extracting these water structures from the liquid structures of aqueous acetonitrile solutions, as calculated using molecular dynamics simulations. The sharp peak profiles of the O K-edge XAS spectra were derived not from water clusters but from isolated water molecules surrounded by acetonitrile molecules. The present study proposes that isolated water molecules are easily formed in aqueous acetonitrile solutions and that the electronic structures of the isolated water molecules can be analyzed using O K-edge XAS spectra, which separates the contributions of small water clusters.

VerSoX B07-B: a high-throughput XPS and ambient pressure NEXAFS beamline at Diamond Light Source

The beamline optics and endstations at branch B of the Versatile Soft X-ray (VerSoX) beamline B07 at Diamond Light Source are described. B07-B provides medium-flux X-rays in the range 45-2200 eV from a bending magnet source, giving access to local electronic structure for atoms of all elements from Li to Y. It has an endstation for high-throughput X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine-structure (NEXAFS) measurements under ultrahigh-vacuum (UHV) conditions. B07-B has a second endstation dedicated to NEXAFS at pressures from UHV to ambient pressure (1 atm). The combination of these endstations permits studies of a wide range of interfaces and materials. The beamline and endstation designs are discussed in detail, as well as their performance and the commissioning process.

Understanding X-ray absorption in liquid water using triple excitations in multilevel coupled cluster theory

X-ray absorption (XA) spectroscopy is an essential experimental tool to investigate the local structure of liquid water. Interpretation of the experiment poses a significant challenge and requires a quantitative theoretical description. High-quality theoretical XA spectra require reliable molecular dynamics simulations and accurate electronic structure calculations. Here, we present the first successful application of coupled cluster theory to model the XA spectrum of liquid water. We overcome the computational limitations on system size by employing a multilevel coupled cluster framework for large molecular systems. Excellent agreement with the experimental spectrum is achieved by including triple excitations in the wave function and using molecular structures from state-of-the-art path-integral molecular dynamics. We demonstrate that an accurate description of the electronic structure within the first solvation shell is sufficient to successfully model the XA spectrum of liquid water within the multilevel framework. Furthermore, we present a rigorous charge transfer analysis of the XA spectrum, which is reliable due to the accuracy and robustness of the electronic structure methodology. This analysis aligns with previous studies regarding the character of the prominent features of the XA spectrum of liquid water.

Spectroscopic and Theoretical Identifications of Two Structural Motifs of (H2O)10 Cluster

Precise characterization of archetypal systems of aqueous hydrogen-bonding networks is essential for developing accurate potential functions and universal models of water. The structures of water clusters (H2O)n (n = 2-9) have been verified recently through size-specific infrared spectroscopy with a vacuum ultraviolet free electron laser (VUV-FEL) and quantum chemical studies. For (H2O)10, the pentagonal prism and butterfly motifs were proposed to be important building blocks and were observed in previous experiments. Here we report the size-specific infrared spectra of (H2O)10 via a joint experimental and theoretical study. Well-resolved spectra provide a unique signature for the coexistence of pentagonal prism and butterfly motifs. These (H2O)10 motifs develop from the dominant structures of (H2O)n (n = 8, 9) clusters. This work provides an intriguing prelude to the diverse structure of liquid water and opens avenues for size-dependent measurement of larger systems to understand the stepwise formation mechanism of hydrogen-bonding networks.

Variation of Surface Propensity of Halides with Droplet Size and Temperature: The Planar Interface Limit

The radial number density profiles of halide and alkali ions in aqueous clusters with equimolar radius ≲1.4 nm, which correspond to ≲255 H2O molecules, have been extensively studied by computations. However, the surface abundance of Cl-, Br-, and I- relative to the bulk interior in these smaller clusters may not be representative of the larger systems. Indeed, here we show that the larger the cluster is, the lower the relative surface abundance of chaotropic halides is. In droplets with an equimolar radius of ≈2.45 nm, which corresponds to ≈2000 H2O molecules, the polarizable halides show a clear number density maximum in the droplet's bulk-like interior. A similar pattern is observed in simulations of the aqueous planar interface with halide salts at room temperature. At elevated temperature the surface propensity of Cl- decreases gradually, while that of I- is partially preserved. The change in the chaotropic halide location at higher temperatures than the room temperature may considerably affect photochemical reactivity in atmospheric aerosols, vapor-liquid nucleation and growth mechanisms, and salt crystallization via solvent evaporation. We argue that the commonly used approach of nullifying parameters in a force field in order to find the factors that determine the ion location does not provide transferable insight into other force fields.

Exploring the impact of ions on oxygen K-edge X-ray absorption spectroscopy in NaCl solution using the GW-Bethe-Salpeter-equation approach

X-ray absorption spectroscopy (XAS) is a powerful experimental tool to probe the local structure in materials with the core hole excitations. Here, the oxygen K-edge XAS spectra of the NaCl solution and pure water are computed by using a recently developed GW-Bethe-Salpeter equation approach, based on configurations modeled by path-integral molecular dynamics with the deep-learning technique. The neural network is trained on ab initio data obtained with strongly constrained and appropriately normed density functional theory. The observed changes in the XAS features of the NaCl solution, compared to those of pure water, are in good agreement between experimental and theoretical results. We provided detailed explanations for these spectral changes that occur when NaCl is solvated in pure water. Specifically, the presence of solvating ion pairs leads to localization of electron-hole excitons. Our theoretical XAS results support the theory that the effects of the solvating ions on the H-bond network are mainly confined within the first hydration shell of ions, however beyond the shell the arrangement of water molecules remains to be comparable to that observed in pure water.

Calibrating TDDFT Calculations of the X-ray Emission Spectrum of Liquid Water: The Effects of Hartree-Fock Exchange

The structure and dynamics of liquid water continue to be debated, with insight provided by, among others, X-ray emission spectroscopy (XES), which shows a split in the high-energy 1b1 feature. This split is yet to be reproduced by theory, and it remains unclear if these difficulties are related to inaccuracies in dynamics simulations, spectrum calculations, or both. We investigate the performance of different methods for calculating XES of liquid water, focusing on the ability of time-dependent density functional theory (TDDFT) to reproduce reference spectra obtained by high-level coupled cluster and algebraic-diagrammatic construction scheme calculations. A metric for evaluating the agreement between theoretical spectra termed the integrated absolute difference (IAD), which considers the integral of shifted difference spectra, is introduced and used to investigate the performance of different exchange-correlation functionals. We find that computed spectra of symmetric and asymmetric model water structures are strongly and differently influenced by the amount of Hartree-Fock exchange, with best agreement to reference spectra for ∼40-50%. Lower percentages tend to yield high density of contributing states, resulting in too broad features. The method introduced here is useful also for other spectrum calculations, in particular where the performance for ensembles of structures are evaluated.

Time-Dependent Density Functional Theory for X-ray Absorption Spectra: Comparing the Real-Time Approach to Linear Response

We simulate X-ray absorption spectra at elemental K-edges using time-dependent density functional theory (TDDFT) in both its conventional linear-response implementation and its explicitly time-dependent or "real-time" formulation. Real-time TDDFT simulations enable broadband spectra calculations without the need to invoke frozen occupied orbitals ("core/valence separation"), but we find that these spectra are often contaminated by transitions to the continuum that originate from lower-energy core and semicore orbitals. This problem becomes acute in triple-ζ basis sets, although it is sometimes sidestepped in double-ζ basis sets. Transitions to the continuum acquire surprisingly large dipole oscillator strengths, leading to spectra that are difficult to interpret. Meaningful spectra can be recovered by means of a filtering technique that decomposes the spectrum into contributions from individual occupied orbitals, and the same procedure can be used to separate L- and K-edge spectra arising from different elements within a given molecule. In contrast, conventional linear-response TDDFT requires core/valence separation but is free of these artifacts. It is also significantly more efficient than the real-time approach, even when hundreds of individual states are needed to reproduce near-edge absorption features and even when Padé approximants are used to reduce the real-time simulations to just 2-4 fs of time propagation. Despite the cost, the real-time approach may be useful to examine the validity of the core/valence separation approximation.

Operando time-resolved soft x-ray absorption spectroscopy for photoexcitation processes of metal complexes in solutions

Operando time-resolved soft x-ray absorption spectroscopy (TR-SXAS) is an effective method to reveal the photochemical processes of metal complexes in solutions. In this study, we have developed the TR-SXAS measurement system for observing various photochemical reactions in solutions by the combination of laser pump pulses with soft x-ray probe pulses from the synchrotron radiation. For the evaluation of the developed TR-SXAS system, we have measured nitrogen K-edge x-ray absorption spectroscopy (XAS) spectra of aqueous iron phenanthroline solutions during a photoinduced spin transition process. The decay process of the high spin state to the low spin state in the iron complex has been obtained from the ligand side by N K-edge XAS, and the time constant is close to that obtained from the central metal side by time-resolved Fe K-edge XAS in the previous studies.

Carbon K-edge x-ray absorption spectra of liquid alcohols from quantum chemical calculations of liquid structures obtained by molecular dynamics simulations

For reproducing the carbon K-edge x-ray absorption spectra of liquid alcohols, inner-shell quantum chemical calculations based on the Hartree-Fock method were performed with the snapshots of the liquid structures obtained by molecular dynamics simulations. The C K-edge inner-shell spectrum of liquid ethanol (EtOH) was obtained by the summation of one thousand calculated spectra of EtOH molecules including neighbor EtOH molecules within the CH₂-CH₂ distance of 6 Å. For the C K-edge inner-shell spectrum of liquid methanol (MeOH), we have calculated one thousand spectra of MeOH molecules including neighbor MeOH molecules within the CH₃-CH₃ distance of 6 Å. The calculated C K-edge inner-shell spectra of liquid alcohols well reproduced the spectral shapes of the experimentally obtained x-ray absorption spectra and the spectral changes from gas to liquid phases.

Microfluidic liquid sheets as large-area targets for high repetition XFELs

The high intensity of X-ray free electron lasers (XFELs) can damage solution-phase samples on every scale, ranging from the molecular or electronic structure of a sample to the macroscopic structure of a liquid microjet. By using a large surface area liquid sheet microjet as a sample target instead of a standard cylindrical microjet, the incident X-ray spot size can be increased such that the incident intensity falls below the damage threshold. This capability is becoming particularly important for high repetition rate XFELs, where destroying a target with each pulse would require prohibitively large volumes of sample. We present here a study of microfluidic liquid sheet dimensions as a function of liquid flow rate. Sheet lengths, widths and thickness gradients are shown for three styles of nozzles fabricated from isotropically etched glass. In-vacuum operation and sample recirculation using these nozzles is demonstrated. The effects of intense XFEL pulses on the structure of a liquid sheet are also briefly examined.

From Local Covalent Bonding to Extended Electric Field Interactions in Proton Hydration

Seemingly simple yet surprisingly difficult to probe, excess protons in water constitute complex quantum objects with strong interactions with the extended and dynamically changing hydrogen-bonding network of the liquid. Proton hydration plays pivotal roles in energy transport in hydrogen fuel cells and signal transduction in transmembrane proteins. While geometries and stoichiometry have been widely addressed in both experiment and theory, the electronic structure of these specific hydrated proton complexes has remained elusive. Here we show, layer by layer, how utilizing novel flatjet technology for accurate x-ray spectroscopic measurements and combining infrared spectral analysis and calculations, we find orbital-specific markers that distinguish two main electronic-structure effects: Local orbital interactions determine covalent bonding between the proton and neigbouring water molecules, while orbital-energy shifts measure the strength of the extended electric field of the proton.

Liquid Heterostructures: Generation of Liquid-Liquid Interfaces in Free-Flowing Liquid Sheets

Chemical reactions and biological processes are frequently governed by the structure and dynamics of the interface between two liquid phases, but these interfaces are often difficult to study due to the relative abundance of the bulk liquids. Here, we demonstrate a method for generating multilayer thin film stacks of liquids, which we call liquid heterostructures. These free-flowing layered liquid sheets are produced with a microfluidic nozzle that impinges two converging jets of one liquid onto opposite sides of a third jet of another liquid. The resulting sheet consists of two layers of the first liquid enveloping an inner layer of the second liquid. Infrared microscopy, white light reflectivity, and imaging ellipsometry measurements demonstrate that the buried liquid layer has a tunable thickness and displays well-defined liquid-liquid interfaces and that this inner layer can be only tens of nanometers thick. The demonstrated multilayer liquid sheets minimize the amount of bulk liquid relative to their buried interfaces, which makes them ideal targets for spectroscopy and scattering experiments.

Ultrafast Charge Relocation Dynamics in Enol-Keto Tautomerization Monitored with a Local Soft-X-ray Probe

Proton-coupled electron transfer (PCET) is the underlying mechanism governing important reactions ranging from water splitting in photosynthesis to oxygen reduction in hydrogen fuel cells. The interplay of proton and electronic charge distribution motions can vary from sequential to concerted schemes, with elementary steps occurring on ultrafast time scales. We demonstrate with a simulation study that femtosecond soft-X-ray spectroscopy provides key insights into the PCET mechanism of a photoinduced intramolecular enol* → keto* tautomerization reaction. A full quantum treatment of the electronic and nuclear dynamics of 2-(2'-hydroxyphenyl)benzothiazole upon electronic excitation reveals how spectral signatures of local excitations from core to frontier orbitals display the distinctly different stages of charge relocation for the H atom, donating, and accepting sites. Our findings indicate that ultraviolet/X-ray pump-probe spectroscopy provides a unique way to probe ultrafast electronic structure rearrangements in photoinduced chemical reactions essential to understanding the mechanism of PCET.

Quantifying the ion coordination strength in polymer electrolytes

In the progress of implementing solid polymer electrolytes (SPEs) into batteries, fundamental understanding of the processes occurring within and in the vicinity of the SPE are required. An important but so far relatively unexplored parameter influencing the ion transport properties is the ion coordination strength. Our understanding of the coordination chemistry and its role for the ion transport is partly hampered by the scarcity of suitable methods to measure this phenomenon. Herein, two qualitative methods and one quantitative method to assess the ion coordination strength are presented, contrasted and discussed for TFSI-based salts of Li+, Na+ and Mg2+ in polyethylene oxide (PEO), poly(ε-caprolactone) (PCL) and poly(trimethylene carbonate) (PTMC). For the qualitative methods, the coordination strength is probed by studying the equilibrium between cation coordination to polymer ligands or solvent molecules, whereas the quantitative method studies the ion dissociation equilibrium of salts in solvent-free polymers. All methods are in agreement that regardless of cation, the strongest coordination strength is observed for PEO, while PTMC exhibits the weakest coordination strength. Considering the cations, the weakest coordination is observed for Mg2+ in all polymers, indicative of the strong ion-ion interactions in Mg(TFSI)2, whilst the coordination strength for Li+ and Na+ seems to be more influenced by the interplay between the cation charge/radius and the polymer structure. The trends observed are in excellent agreement with previously observed transference numbers, confirming the importance and its connection to the ion transport in SPEs.

Salt Enrichment and Dynamics in the Interface of Supercooled Aqueous Droplets

The interconversion reaction of NaCl between the contact-ion pair (CIP) and the solvent-separated ion pair (SSIP) as well as the free-ion state in cold droplets has not yet been investigated. We report direct computational evidence that the lower is the temperature, the closer to the surface the ion interconversion reaction takes place. In supercooled droplets the enrichment of the subsurface in salt becomes more evident. The stability of the SSIP relative to the CIP increases as the ion-pairing is transferred toward the droplet's outer layers. In the free-ion state, where the ions diffuse independently in the solution, the number density of Cl^- shows a broad maximum in the interior in addition to the well-known maximum in the surface. In the study of the reaction dynamics, we find a weak coupling between the interionic NaCl distance reaction coordinate and the solvent degrees of freedom, which contrasts with the diffusive crossing of the free energy barrier found in bulk solution modeling. The H₂O self-diffusion coefficient is found to be at least an order of magnitude larger than that in the bulk solution. We propose to exploit the enhanced surface ion concentration at low temperature to eliminate salts from droplets in native mass spectrometry ionization methods.

Hydrophobic Cluster Formation in Aqueous Ethanol Solutions Probed by Soft X-ray Absorption Spectroscopy

Hydrophobic cluster structures in aqueous ethanol solutions at different concentrations have been investigated by soft X-ray absorption spectroscopy (XAS). In the O K-edge XAS, we have found that hydrogen bond structures among water molecules are enhanced in the middle-concentration region by the hydrophobic interaction of the ethyl groups in ethanol. In the C K-edge XAS, the lower energy features arise from a transition from the terminal methyl C 1s electron to an unoccupied orbital of 3s Rydberg character, which is sensitive to the nearest-neighbor intermolecular interactions. From the comparison of C K-edge XAS with the inner-shell calculations, we have found that ethanol clusters are easily formed in the middle-concentration region due to the hydrophobic interaction of the ethyl group in ethanol, resulting in the enhancement of the hydrogen bond structures among water molecules. This behavior is different from aqueous methanol solutions, where the methanol-water mixed clusters are more predominant in the middle-concentration region due to the relatively weak hydrophobic interactions of the methyl group in methanol.

Multimodal electrochemistry coupled microcalorimetric and X-ray probing of the capacity fade mechanisms of Nickel rich NMC - progress and outlook

Lithium nickel manganese cobalt oxide (NMC) is a commercially successful Li-ion battery cathode due to its high energy density; however, its delivered capacity must be intentionally limited to achieve capacity retention over extended cycling. To design next-generation NMC batteries with longer life and higher capacity the origins of high potential capacity fade must be understood. Operando hard X-ray characterization techniques are critical for this endeavor as they allow the acquisition of information about the evolution of structure, oxidation state, and coordination environment of NMC as the material (de)lithiates in a functional battery. This perspective outlines recent developments in the elucidation of capacity fade mechanisms in NMC through hard X-ray probes, surface sensitive soft X-ray characterization, and isothermal microcalorimetry. A case study on the effect of charging potential on NMC811 over extended cycling is presented to illustrate the benefits of these approaches. The results showed that charging to 4.7 V leads to higher delivered capacity, but much greater fade as compared to charging to 4.3 V. Operando XRD and SEM results indicated that particle fracture from increased structural distortions at >4.3 V was a contributor to capacity fade. Operando hard XAS revealed significant Ni and Co redox during cycling as well as a Jahn-Teller distortion at the discharged state (Ni³⁺); however, minimal differences were observed between the cells charged to 4.3 and 4.7 V. Additional XAS analyses using soft X-rays revealed significant surface reconstruction after cycling to 4.7 V, revealing another contribution to fade. Operando isothermal microcalorimetry (IMC) indicated that the high voltage charge to 4.7 V resulted in a doubling of the heat dissipation when compared to charging to 4.3 V. A lowered chemical-to-electrical energy conversion efficiency due to thermal energy waste was observed, providing a complementary characterization of electrochemical degradation. The work demonstrates the utility of multi-modal X-ray and microcalorimetric approaches to understand the causes of capacity fade in lithium-ion batteries with Ni-rich NMC.

Many-body effects in the X-ray absorption spectra of liquid water

SignificanceIn X-ray absorption spectroscopy, an electron-hole excitation probes the local atomic environment. The interpretation of the spectra requires challenging theoretical calculations, particularly in a system like liquid water, where quantum many-body effects and molecular disorder play an important role. Recent advances in theory and simulation make possible new calculations that are in good agreement with experiment, without recourse to commonly adopted approximations. Based on these calculations, the three features observed in the experimental spectra are unambiguously attributed to excitonic effects with different characteristic correlation lengths, which are distinctively affected by perturbations of the underlying H-bond structure induced by temperature changes and/or by isotopic substitution. The emerging picture of the water structure is fully consistent with the conventional tetrahedral model.

Operando Resonant Soft X-ray Scattering Studies of Chemical Environment and Interparticle Dynamics of Cu Nanocatalysts for CO2 Electroreduction

Understanding the chemical environment and interparticle dynamics of nanoparticle electrocatalysts under operating conditions offers valuable insights into tuning their activity and selectivity. This is particularly important to the design of Cu nanocatalysts for CO₂ electroreduction due to their dynamic nature under bias. Here, we have developed operando electrochemical resonant soft X-ray scattering (EC-RSoXS) to probe the chemical identity of active sites during the dynamic structural transformation of Cu nanoparticle (NP) ensembles through 1 μm thick electrolyte. Operando scattering-enhanced X-ray absorption spectroscopy (XAS) serves as a powerful technique to investigate the size-dependent catalyst stability under beam exposure while monitoring the potential-dependent surface structural changes. Small NPs (7 nm) in aqueous electrolyte were found to experience a predominant soft X-ray beam-induced oxidation to CuO despite only sub-second X-ray exposure. In comparison, large NPs (18 nm) showed improved resistivity to beam damage, which allowed the reliable observation of surface Cu₂O electroreduction to metallic Cu. Small-angle X-ray scattering (SAXS) statistically probes the particle-particle interactions of large ensembles of NPs. This study points out the need for rigorous examination of beam effects for operando X-ray studies on electrocatalysts. The strategy of using EC-RSoXS that combines soft XAS and SAXS can serve as a general approach to simultaneously investigate the chemical environment and interparticle information on nanocatalysts.

X-ray compatible microfluidics for in situ studies of chemical state, transport and reaction of light elements in an aqueous environment using synchrotron radiation

This paper presents an X-ray compatible microfluidic platform for in situ characterization of chemical reactions at synchrotron light sources. We demonstrate easy to implement techniques to probe reacting solutions as they first come into contact, and study the very first milliseconds of their reaction in real-time through X-ray absorption spectroscopy (XAS). The devices use polydimethylsiloxane (PDMS) microfluidic channels sandwiched between ultrathin, X-ray transparent silicon nitride observation windows and rigid substrates. The new approach has three key advantages: i) owing to the assembly techniques employed, the devices are suitable for both high energy and tender (1-5 keV) X-rays; ii) they can operate in a vacuum environment (a must for low energy X-rays) and iii) they are robust enough to survive a full 8 hour shift of continuous scanning with a micro-focused beam, providing higher spatial and thus greater time resolution than previous studies. The combination of these opens new opportunities for in situ studies. This has so far not been possible with Kapton or glass-based flow cells due to increased attenuation of the low energy beam passing through these materials. The devices provide a well-defined mixing region to collect spatial maps of spatially stable concentration profiles, and XAS point spectra to elucidate the chemical structure and characterize the chemical reactions. The versatility of the approach is demonstrated through in situ XAS measurements on the mixing of two reactants in a microfluidic laminar flow device, as well as a segmented droplet based system for time resolved analysis.

Operando Characterization of Organic Mixed Ionic/Electronic Conducting Materials

Operando characterization plays an important role in revealing the structure-property relationships of organic mixed ionic/electronic conductors (OMIECs), enabling the direct observation of dynamic changes during device operation and thus guiding the development of new materials. This review focuses on the application of different operando characterization techniques in the study of OMIECs, highlighting the time-dependent and bias-dependent structure, composition, and morphology information extracted from these techniques. We first illustrate the needs, requirements, and challenges of operando characterization then provide an overview of relevant experimental techniques, including spectroscopy, scattering, microbalance, microprobe, and electron microscopy. We also compare different in silico methods and discuss the interplay of these computational methods with experimental techniques. Finally, we provide an outlook on the future development of operando for OMIEC-based devices and look toward multimodal operando techniques for more comprehensive and accurate description of OMIECs.

Metal-Ion Oligomerization Inside Electrified Carbon Micropores and its Effect on Capacitive Charge Storage

Ion adsorption inside electrified carbon micropores is pivotal for the operation of supercapacitors. Depending on the electrolyte, two main mechanisms have been identified so far, the desolvation of ions in solvents and the formation of superionic states in ionic liquids. Here, it is shown that upon confinement inside negatively charged micropores, transition-metal cations dissolved in water associate to form oligomer species. They are identified using in situ X-ray absorption spectroscopy. The cations associate one with each other via hydroxo bridging, forming ionic oligomers under the synergic effect of spatial confinement and Coulombic screening. The oligomers display sluggish dissociation kinetics and accumulate upon cycling, which leads to supercapacitor capacitance fading. They may be dissolved by applying a positive potential, so an intermittent reverse cycling strategy is proposed to periodically evacuate micropores and revivify the capacitance. These results reveal new insights into ion adsorption and structural evolution with their effects on the electrochemical performance, providing guidelines for designing advanced supercapacitors.

Temperature measurements of liquid flat jets in vacuum

Sub-μm thin samples are essential for spectroscopic purposes. The development of flat micro-jets enabled novel spectroscopic and scattering methods for investigating molecular systems in the liquid phase. However, the temperature of these ultra-thin liquid sheets in vacuum has not been systematically investigated. Here, we present a comprehensive temperature characterization using optical Raman spectroscopy of sub-micron flatjets produced by two different methods: colliding of two cylindrical jets and a cylindrical jet compressed by a high pressure gas. Our results reveal the dependence of the cooling rate on the material properties and the source characteristics, i.e., nozzle-orifice size, flow rate, and pressure. We show that materials with higher vapor pressures exhibit faster cooling rates, which is illustrated by comparing the temperature profiles of water and ethanol flatjets. In a sub-μm liquid sheet, the temperature of the water sample reaches around 268 K and the ethanol around 253 K close to the flatjet's terminus.

Spatial and Temporal Analysis of Sodium-Ion Batteries

As a promising alternative to the market-leading lithium-ion batteries, low-cost sodium-ion batteries (SIBs) are attractive for applications such as large-scale electrical energy storage systems. The energy density, cycling life, and rate performance of SIBs are fundamentally dependent on dynamic physiochemical reactions, structural change, and morphological evolution. Therefore, it is essential to holistically understand SIBs reaction processes, degradation mechanisms, and thermal/mechanical behaviors in complex working environments. The recent developments of advanced in situ and operando characterization enable the establishment of the structure-processing-property-performance relationship in SIBs under operating conditions. This Review summarizes significant recent progress in SIBs exploiting in situ and operando techniques based on X-ray and electron analyses at different time and length scales. Through the combination of spectroscopy, imaging, and diffraction, local and global changes in SIBs can be elucidated for improving materials design. The fundamental principles and state-of-the-art capabilities of different techniques are presented, followed by elaborative discussions of major challenges and perspectives.

Polymer thin films as universal substrates for extreme ultraviolet absorption spectroscopy of molecular transition metal complexes

Polystyrene and polyvinyl chloride thin films are explored as sample supports for extreme ultraviolet (XUV) spectroscopy of molecular transition metal complexes. Thin polymer films prepared by slip-coating are flat and smooth, and transmit much more XUV light than silicon nitride windows. Analytes can be directly cast onto the polymer surface or co-deposited within it. The M-edge XANES spectra (40-90 eV) of eight archetypal transition metal complexes (M = Mn, Fe, Co, Ni) are presented to demonstrate the versatility of this method. The films are suitable for pump/probe transient absorption spectroscopy, as shown by the excited-state spectra of Fe(bpy)₃²⁺ in two different polymer supports.

Nitrogen K-Edge X-ray Absorption Spectra of Ammonium and Ammonia in Water Solution: Assessing the Performance of Polarizable Embedding Coupled Cluster Methods

The recent development of liquid jet and liquid leaf sample delivery systems allows for accurate measurements of soft X-ray absorption spectra in transmission mode of solutes in a liquid environment. As this type of measurement becomes increasingly accessible, there is a strong need for reliable theoretical methods for assisting in the interpretation of the experimental data. Coupled cluster methods have been extensively developed over the past decade to simulate X-ray absorption in the gas phase. Their performance for solvated species, on the contrary, remains largely unexplored. Here, we investigate the current state of the art of coupled cluster modeling of nitrogen K-edge X-ray absorption of aqueous ammonia and ammonium based on quantum mechanics/molecular mechanics, where both the level of coupled cluster calculations and polarizable embedding are scrutinized. The results are compared to existing experimental data as well as simulations based on transition potential density functional theory.

In Situ X-ray Absorption Spectroscopy and Droplet-Based Microfluidics: An Analysis of Calcium Carbonate Precipitation

Droplet-based microfluidic systems are ideally suited for the investigation of nucleation and crystallization processes. To best leverage the features of such platforms (including exquisite time resolution and high-throughput operation), sensitive and in situ detection schemes are needed to extract real-time chemical information about all species of interest. In this regard, the extension of conventional (UV, visible, and infrared) optical detection schemes to the X-ray region of the electromagnetic spectrum is of high current interest, as techniques such as X-ray absorption spectroscopy (XAS) provide for the element-specific investigation of the local chemical environment. Accordingly, herein, we report for the first time the integration of millisecond droplet-based microfluidics with XAS. Such a platform allows for the sensitive acquisition of X-ray absorption data from picoliter-volume droplets moving at high linear velocities. Significantly, the high-temporal resolution of the droplet-based microfluidic platform enables unprecedented access to the early stages of the reaction. Using such an approach, we demonstrate in situ monitoring of calcium carbonate precipitation by extracting XAS spectra at the early time points of the reaction with a dead time as low as 10 ms. We obtain insights into the kinetics of the formation of amorphous calcium carbonate (ACC) as a first species during the crystallization process by monitoring the proportion of calcium ions converted into ACC. Within the confined and homogeneous environment of picoliter-volume droplets, the ACC content reaches 60% over the first 130 ms. More generally, the presented method offers new opportunities for the real-time monitoring of fast chemical and biological processes.

Transmission x-ray microscopy and its applications in battery material research-a short review

Transmission x-ray microscopy (TXM), which can provide morphological and chemical structural information inside of battery component materials at tens of nanometer scale, has become a powerful tool in battery research. This article presents a short review of the TXM, including its instrumentation, battery research applications, and the practical sample preparation and data analysis in the TXM applications. A brief discussion on the challenges and opportunities in the TXM applications is presented at the end.

Low Density Interior in Supercooled Aqueous Nanodroplets Expels Ions to the Subsurface

The interaction between water and ions within droplets plays a key role in the chemical reactivity of atmospheric and man-made aerosols. Here we report direct computational evidence that in supercooled aqueous nanodroplets a lower density core of tetrahedrally coordinated water expels the cosmotropic ions to the denser and more disordered subsurface. In contrast, at room temperature, depending on the nature of the ion, the radial distribution in the droplet core is nearly uniform or elevated toward the center. We analyze the spatial distribution of a single ion in terms of a reference electrostatic model. The energy of the system in the analytical model is expressed as the sum of the electrostatic and surface energy of a deformable droplet. The model predicts that the ion is subject to a harmonic potential centered at the droplet's center of mass. We name this effect "electrostatic confinement". The model's predictions are consistent with the simulation findings for a single ion at room temperature but not at supercooling. We anticipate this study to be the starting point for investigating the structure of supercooled (electro)sprayed droplets that are used to preserve the conformations of macromolecules originating from the bulk solution.

Molecular Properties and Chemical Transformations Near Interfaces

The properties of bulk water and aqueous solutions are known to change in the vicinity of an interface and/or in a confined environment, including the thermodynamics of ion selectivity at interfaces, transition states and pathways of chemical reactions, and nucleation events and phase growth. Here we describe joint progress in identifying unifying concepts about how air, liquid, and solid interfaces can alter molecular properties and chemical reactivity compared to bulk water and multicomponent solutions. We also discuss progress made in interfacial chemistry through advancements in new theory, molecular simulation, and experiments.

STXM-XANES and computational investigations of adsorption of per- and polyfluoroalkyl substances on modified clay

The study investigated molecular mechanisms of per- and polyfluoroalkyl substances (PFAS) on a surfactant modified clay (SMC), which rivals or exceeds the performance of granular activated carbon in removing long-chain PFAS from contaminated water. The adsorption isotherms of four anionic and one neutral PFAS from 1 × 10^-9 to 1 × 10^-5 mol/L were measured to be piecewise, accompanied by the expansion of the SMC interlayer. Based on the spatial distribution of perfluorocarboxylic acid (PFOA) on SMC at the submicron scale, achieved by synchrotron-based scanning transmission X-ray microscopy (STXM) coupled with X-ray absorption near-edge structure spectroscopy (XANES), PFOA molecules were confirmed to enter the interlayer space of SMC and could form charge-charge interaction with the intercalants (quaternary ammonia cations). Revealed by the all-atom molecular dynamics (MD) simulation and density functional theory-based quantum calculations, the interactions between the positively charged surfactant and representative PFAS include charge-charge, charge-dipole, and dipole-dipole interactions. The adsorption mechanisms vary from one PFAS structure to another in terms of adsorption energy and spatial arrangement. Those interactions overcome the interaction between PFAS and water, allowing PFAS to be retained in the SMC's interlayer space. The study provides fundamental insights into how PFAS interact with clay-based materials, supporting the use of the materials for PFAS treatment and remediation.

Agile spectral tuning of high order harmonics by interference of two driving pulses

In this work, the experimental realization of a tunable high photon flux extreme ultraviolet light source is presented. This is enabled by high harmonic generation of two temporally delayed driving pulses with a wavelength of 1030 nm, resulting in a tuning range of 0.8 eV at the 19^th harmonic at 22.8 eV. The implemented approach allows for fast tuning of the spectrum, is highly flexible and is scalable towards full spectral coverage at higher photon energies.

Nanostructure of bone tissue probed with Ca 2p and O 1s NEXAFS spectroscopy

X-ray absorption spectroscopy is applied to investigate relationships between hierarchical organization of the skeleton and nanostructure of femoral bone in knee compartments and to understand the osteoarthritis (OA) related changes at the subcellular level. Our focus is on local electronic and atomic and molecular architectonics of the medial and lateral condyles of the femur resected during total knee arthroplasty in patients with medial compartmental knee OA. The element-specific and site-dependent peculiarities in spectral distributions of oscillator strength for core-to-valence transitions are revealed. The near Ca 2p and O 1s edges x-ray absorption fine structure (Ca 2p and O 1s NEXAFS) spectra of the saw cuts demonstrate substantial redistributions in intact and OA damaged areas on the proximal side, and on the proximal and distal sides of the samples. Examining the O 1s NEXAFS spectra new chemical bonds are revealed on the proximal surface in the OA areas. Strong intra-atomic intershell Ca2+ 2 p 3 / 2 , 1 / 2 5 3 d 1 interaction specifies the great similarity of the Ca 2p NEXAFS spectra. Their analysis performed in combination with the x-ray photoelectron data has demonstrated the formation of non-apatite calcium in the OA areas of the samples. It is shown that NEXAFS spectroscopy is a powerful tool for deeper understanding relationship between hierarchical skeletal organization and nanostructure of native bone. Perspectives for development of novel methods for medical imaging and diagnosis of subchondral bone at the nanolevel are discussed.

Core level photoelectron spectroscopy of heterogeneous reactions at liquid-vapor interfaces: Current status, challenges, and prospects

Liquid-vapor interfaces, particularly those between aqueous solutions and air, drive numerous important chemical and physical processes in the atmosphere and in the environment. X-ray photoelectron spectroscopy is an excellent method for the investigation of these interfaces due to its surface sensitivity, elemental and chemical specificity, and the possibility to obtain information on the depth distribution of solute and solvent species in the interfacial region. In this Perspective, we review the progress that was made in this field over the past decades and discuss the challenges that need to be overcome for investigations of heterogeneous reactions at liquid-vapor interfaces under close-to-realistic environmental conditions. We close with an outlook on where some of the most exciting and promising developments might lie in this field.

In Situ/Operando Electrocatalyst Characterization by X-ray Absorption Spectroscopy

During the last decades, X-ray absorption spectroscopy (XAS) has become an indispensable method for probing the structure and composition of heterogeneous catalysts, revealing the nature of the active sites and establishing links between structural motifs in a catalyst, local electronic structure, and catalytic properties. Here we discuss the fundamental principles of the XAS method and describe the progress in the instrumentation and data analysis approaches undertaken for deciphering X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectra. Recent usages of XAS in the field of heterogeneous catalysis, with emphasis on examples concerning electrocatalysis, will be presented. The latter is a rapidly developing field with immense industrial applications but also unique challenges in terms of the experimental characterization restrictions and advanced modeling approaches required. This review will highlight the new insight that can be gained with XAS on complex real-world electrocatalysts including their working mechanisms and the dynamic processes taking place in the course of a chemical reaction. More specifically, we will discuss applications of in situ and operando XAS to probe the catalyst's interactions with the environment (support, electrolyte, ligands, adsorbates, reaction products, and intermediates) and its structural, chemical, and electronic transformations as it adapts to the reaction conditions.

The effect of relative humidity on CaCl2 nanoparticles studied by soft X-ray absorption spectroscopy

Ca- and Cl-containing nanoparticles are common in atmosphere, originating for example from desert dust and sea water. The properties and effects on atmospheric processes of these aerosol particles depend on the relative humidity (RH) as they are often both hygroscopic and deliquescent. We present here a study of surface structure of free-flying CaCl₂ nanoparticles (CaCl₂-NPs) in the 100 nm size regime prepared at different humidity levels (RH: 11-85%). We also created mixed nanoparticles by aerosolizing a solution of CaCl₂ and phenylalanine (Phe), which is a hydrophobic amino acid present in atmosphere. Information of hydration state of CaCl₂-NPs and production of mixed CaCl₂ + Phe nanoparticles was obtained using soft X-ray absorption spectroscopy (XAS) at Ca 2p, Cl 2p, C 1s, and O 1s edges. We also report Ca 2p and Cl 2p X-ray absorption spectra of an aqueous CaCl₂ solution. The O 1s X-ray absorption spectra measured from hydrated CaCl₂-NPs resemble liquid-like water spectrum, which is heavily influenced by the presence of ions. Core level spectra of Ca²⁺ and Cl^- ions do not show a clear dependence of % RH, indicating that the first coordination shell remains similar in all measured hydrated CaCl₂-NPs, but they differ from aqueous solution and solid CaCl₂.

Ambient pressure mapping of resonant Auger spectroscopy at BL02B01 at the Shanghai Synchrotron Radiation Facility

During the past few decades, resonant Auger spectroscopy (RAS) has presented some advantages in elucidating the electronic structure of free molecules, liquids, and solids. To further extend the application of RAS in complex in situ environments, the ambient pressure system should be developed to characterize the gas-solid and liquid-solid interfaces. In this paper, we describe the design and performance of an ambient pressure mapping of resonant Auger spectroscopy (mRAS) system newly developed at BL02B01 at the Shanghai Synchrotron Radiation Facility. This system is unique in that the ambient pressure soft x-ray absorption spectroscopy (sXAS) can be measured in Auger electron yield with kinetic energy (KE) resolved. We can obtain a mapping of the resonant Auger spectroscopy (mRAS) in the near ambient pressure environment. This approach provides an additional dimension of information along the KE of Auger electrons to reveal details of the valence and unoccupied states at the vicinity of the absorption edge. Complementary to the photoemission spectroscopy that probes the core levels, in situ two-dimension mRAS characterization is useful in studying the electronic structure of complex interfaces of gas-solid and liquid-solid under realistic operating conditions. We herein present the in situ oxidation of Cu(111) in the ambient oxygen environment as demonstration of the mRAS capability. Specifically, resolving the Auger features gives valuable clues to the molecular level understanding of chemical bonding and the evolution of orbital hybridization. In addition, the mRAS results of spatial resolution and mbar range gas pressure are shown and discussed.

Equation-of-Motion MLCCSD and CCSD-in-HF Oscillator Strengths and Their Application to Core Excitations

We present an implementation of equation-of-motion oscillator strengths for the multilevel CCSD (MLCCSD) model where CCS is used as the lower level method (CCS/CCSD). In this model, the double excitations of the cluster operator are restricted to an active orbital space, whereas the single excitations are unrestricted. Calculated nitrogen K-edge spectra of adenosine, adenosine triphosphate (ATP), and an ATP-water system are used to demonstrate the performance of the model. Projected atomic orbitals (PAOs) are used to partition the virtual space into active and inactive orbital sets. Cholesky decomposition of the Hartree-Fock density is used to partition the occupied orbitals. This Cholesky-PAO partitioning is cheap, scaling as O(N3), and is suitable for the calculation of core excitations, which are localized in character. By restricting the single excitations of the cluster operator to the active space, as well as the double excitations, the CCSD-in-HF model is obtained. A comparison of the two models-MLCCSD and CCSD-in-HF-is presented for the core excitation spectra of the adenosine and ATP systems.

Generation and simple characterization of flat, liquid jets

We present an approach to determine the absolute thickness profile of flat liquid jets, which takes advantage of the information of thin film interference combined with light absorption, both captured in a single microscopic image. The feasibility of the proposed method is demonstrated on our compact experimental setup used to generate micrometer thin, free-flowing liquid jet sheets upon collision of two identical laminar cylindrical jets. Stable operation was achieved over several hours of the flat jet in vacuum (10^-4 mbar), making the system ideally suitable for soft x-ray photon spectroscopy of liquid solutions. We characterize the flat jet size and thickness generated with two solvents, water and ethanol, employing different flow rates and nozzles of variable sizes. Our results show that a gradient of thickness ranging from a minimal thickness of 2 µm to over 10 µm can be found within the jet surface area. This enables the tunability of the sample thickness in situ, allowing the optimization of the transmitted photon flux for the chosen photon energy and sample. We demonstrate the feasibility of x-ray absorption spectroscopy experiments in transmission mode by measuring at the oxygen K-edge of ethanol. Our characterization method and the description of the experimental setup and its reported performance are expected to expand the range of applications and facilitate the use of flat liquid jets for spectroscopy experiments.