Interactions of Native Cyclodextrins with Metal Ions and Inorganic Nanoparticles: Fertile Landscape for Chemistry and Materials Science

Pickering emulsion stabilized by quercetin-β-cyclodextrin-diglyceride particles: Effect of diglyceride content on interfacial behavior and emulsifying property of complex particles

This research develops diacylglycerol (DAG) based Pickering emulsions with enhanced oxidative stability stabilized by self-assembled quercetin/DAG/β-cyclodextrin (β-CD) complexes (QDCCs) using a one-step agitation method. Influence of DAG content (5%, 15%, 40%, and 80%, w/w) on the self-assembly behavior, interfacial properties, and emulsifying ability of complex particles was investigated. SEM, XRD and ATR-FTIR studies confirmed the formation of ternary composite particles. QDCCs in 80% DAG oil had the highest quercetin encapsulation efficiency (6.09 ± 0.01%), highest DPPH radical scavenging rate and ferric reducing antioxidant property (FRAP). β-CD and quercetin adsorption rates in emulsion with 80% DAG oil were 88.4 ± 2.53% and 98.34 ± 0.15%, respectively. Pickering emulsions with 80% DAG had the smallest droplet size (8.90 ± 1.87 μm) and excellent oxidation stability. This research develops a novel approach to regulate the physicochemical stability of DAG-based emulsions by anchoring natural antioxidants at the oil-water interface through a one-pot self-assembly method.

The interaction of polyphenols-polysaccharides and their applications: A review

Polyphenols, as important secondary metabolites in nature, are widely distributed in vegetables, fruits, grains, and other foods. Polyphenols have attracted widespread attention in the food industry and nutrition due to their unique structure and various biological activities. However, the health benefits of polyphenols are compromised owing to their structural instability and sensitivity to the external environment. The interaction between polyphenols and polysaccharides largely determined the stability and functional characteristics of polyphenols in food processing and storage. Thus, this topic has attracted widespread attention in recent years. The main purposes of this article are as follows: 1) to review the interaction mechanisms of polyphenols and polysaccharides including non-covalent and covalent bonds; 2) to comprehensively analyze the influencing factors of the interaction between polyphenols and polysaccharides, and introduce the effects of their interaction on the properties of polyphenols; 3) to systematically summarize the applications of interaction between polyphenols and polysaccharides. The findings can provide the important reference and theoretical support for the application of polyphenols and polysaccharides in food industry.

Ultra-small gold nanoparticles embedded cyclodextrin metal-organic framework composite membrane to achieve antibacterial and humidity-responsive functions

Cyclodextrin metal-organic framework (CD-MOF) is an edible and porous material that can serve as a template for synthesizing small-sized metal nanoparticles. However, its highly hydrophilic nature has limited its wider application. Herein, ultra-small gold nanoparticles (U-AuNPs) were loaded into CD-MOF to produce a composite material Au@CD-MOF. The CD-MOF was utilized as a template to control the size of the AuNPs. The synthesized Au@CD-MOF was easily dispersible in aqueous medium and its released U-AuNPs exhibited effective water dispersion stability within 120 days. Additionally, compared to gold nanoparticles prepared using traditional methods (T-AuNPs), the U-AuNPs exhibited superior antibacterial properties. Furthermore, hydrophilic Au@CD-MOF was incorporated into a hydrophobic polydimethylsiloxane (PDMS) matrix (Au@CD-MOF/PDMS) to achieve a humidity-responsive antibacterial function. The composite membrane exhibited remarkable responsiveness to humidity, showing almost no release of U-AuNPs at 0 % humidity. However, it exhibited approximately 89 % release within 1 h, and complete release of U-AuNPs was observed within 4 h under 100 % humidity. These findings highlight the successful preparation of a humidity-responsive antibacterial composite membrane, which has great potential applications in various scenarios, particularly in the field of antibacterial food packaging.

Hofmeister Effects in Supramolecular Chemistry for Anion-Modulation to Stabilize Zn Anode

Aqueous Zn-ion batteries (AZIBs) are considered as promising candidates for the next-generation large-scale energy storage, which, however, is facing the challenge of instable Zn anodes. The anion is pivotal in the stability of anodes, which are not being paid enough attention to. Herein, the modulation of anions is reported using the Hofmeister series in supramolecular chemistry to boost the stability of Zn anodes. It is found that the right-side anions in the Hofmeister series (e.g., OTf-) can enhance the Zn2+ transference number, increase the Coulombic efficiency, facilitate uniform Zn deposition, reduce the freezing point of electrolytes, and thereby stabilize the Zn anodes. More importantly, the right-side anions can form strong interaction with β-cyclodextrin (β-CD) compared to the left-side anions, and hence the addition of β-CD can further enhance the stability of Zn anodes in OTf--based electrolytes, showing enhancement of cycling lifespan in the Zn//Zn symmetric cells more than 45.5 times with β-CD compared with those without β-CD. On the contrary, the left-side anions show worse rate performance after the addition of β-CD. These results provide an effective and novel approach for choosing anions and matching additives to stabilize the anodes and achieve high-performance AZIBs through the Hofmeister effect.

The effect of host size on binding in host-guest complexes of cyclodextrins and polyoxometalates

Harnessing flexible host cavities opens opportunities for the design of novel supramolecular architectures that accommodate nanosized guests. This research examines unprecedented gas-phase structures of Keggin-type polyoxometalate PW12O40 3- (WPOM) and cyclodextrins (X-CD, X = α, β, γ, δ, ε, ζ) including previously unexplored large, flexible CDs. Using ion mobility spectrometry coupled to mass spectrometry (IM-MS) in conjunction with molecular dynamics (MD) simulations, we provide first insights into the binding modes between WPOM and larger CD hosts as isolated structures. Notably, γ-CD forms two distinct structures with WPOM through binding to its primary and secondary faces. We also demonstrate that ε-CD forms a deep inclusion complex, which encapsulates WPOM within its annular inner cavity. In contrast, ζ-CD adopts a saddle-like conformation in its complex with WPOM, which resembles its free form in solution. More intriguingly, the gas-phase CD-WPOM structures are highly correlated with their counterparts in solution as characterized by nuclear magnetic resonance (NMR) spectroscopy. The strong correlation between the gas- and solution phase structures of CD-WPOM complexes highlight the power of gas-phase IM-MS for the structural characterization of supramolecular complexes with nanosized guests, which may be difficult to examine using conventional approaches.

Recent Progress in Circularly Polarized Luminescent Materials Based on Cyclodextrins

Circularly polarized luminescence (CPL) materials have been widely used in the fields of bioimaging, optoelectronic devices, and optical communications. The supramolecular interaction, involving harnessing non-covalent interactions between host and guest molecules to control their arrangements and assemblies, represents an advanced approach for facilitating the development of CPL materials and finely constructing and tuning the desired CPL properties. Cyclodextrins (CDs) are cyclic natural polysaccharides, which have also been ubiquitous in various fields such as molecular recognition, drug encapsulation, and catalyst separation. By adjusting the interactions between CDs and guest molecules precisely, composite materials with CPL properties can be facilely generated. This review aims to outline the design strategies and performance of CD-based CPL materials comprehensively and provides a detailed illustration of the interactions between host and guest molecules.

Encapsulation engineering of porous crystalline frameworks for delayed luminescence and circularly polarized luminescence

Delayed luminescence (DF), including phosphorescence and thermally activated delayed fluorescence (TADF), and circularly polarized luminescence (CPL) exhibit common and broad application prospects in optoelectronic displays, biological imaging, and encryption. Thus, the combination of delayed luminescence and circularly polarized luminescence is attracting increasing attention. The encapsulation of guest emitters in various host matrices to form host-guest systems has been demonstrated to be an appealing strategy to further enhance and/or modulate their delayed luminescence and circularly polarized luminescence. Compared with conventional liquid crystals, polymers, and supramolecular matrices, porous crystalline frameworks (PCFs) including metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), zeolites and hydrogen-bonded organic frameworks (HOFs) can not only overcome shortcomings such as flexibility and disorder but also achieve the ordered encapsulation of guests and long-term stability of chiral structures, providing new promising host platforms for the development of DF and CPL. In this review, we provide a comprehensive and critical summary of the recent progress in host-guest photochemistry via the encapsulation engineering of guest emitters in PCFs, particularly focusing on delayed luminescence and circularly polarized luminescence. Initially, the general principle of phosphorescence, TADF and CPL, the combination of DF and CPL, and energy transfer processes between host and guests are introduced. Subsequently, we comprehensively discuss the critical factors affecting the encapsulation engineering of guest emitters in PCFs, such as pore structures, the confinement effect, charge and energy transfer between the host and guest, conformational dynamics, and aggregation model of guest emitters. Thereafter, we summarize the effective methods for the preparation of host-guest systems, especially single-crystal-to-single-crystal (SC-SC) transformation and epitaxial growth, which are distinct from conventional methods based on amorphous materials. Then, the recent advancements in host-guest systems based on PCFs for delayed luminescence and circularly polarized luminescence are highlighted. Finally, we present our personal insights into the challenges and future opportunities in this promising field.

Development of novel transition metal-catalyzed synthetic approaches for the synthesis of a dihydrobenzofuran nucleus: a review

The synthesis of dihydrobenzofuran scaffolds bears pivotal significance in the field of medicinal chemistry and organic synthesis. These heterocyclic scaffolds hold immense prospects owing to their significant pharmaceutical applications as they are extensively employed as essential precursors for constructing complex organic frameworks. Their versatility and importance make them an interesting subject of study for researchers in the scientific community. While exploring their synthesis, researchers have unveiled various novel and efficient pathways for assembling the dihydrobenzofuran core. In the wake of extensive data being continuously reported each year, we have outlined the recent updates (post 2020) on novel methodological accomplishments employing the efficient catalytic role of several transition metals to forge dihydrobenzofuran functionalities.

Synthesis of fenugreek gum-based metal-organic framework (FG/Zr-AIPA MOF) composite beads for sequestration of heavy metal ions from aqueous solution

Metal-organic frameworks (MOFs) are a prominent class of materials due to their large surface area and customized structures. This gives them specificity and high adsorption capacity while they lack mechanical strength and reusability. Integrating MOFs with polysaccharide matrix may retain MOF characteristics along with imparting structural integrity. In the present study, zirconium MOF-based fenugreek composite (FG/Zr-AIPA) beads were synthesised by a single droplet method and utilised for removal of Cr(VI), Pb(II) and Fe(III) from aqueous solution. The structure, morphology and composition of beads were evaluated by FTIR, XRD, TGA, BET, FESEM, EDX, XPS and zeta potential analysis. Adsorption isotherm, kinetics and thermodynamics were studied for Cr(VI), Pb(II) and Fe(III) adsorption. Adsorption kinetics and isotherm study revealed that all the metal ions were adsorbed through a monolayer chemisorption process. The maximum adsorption capacity was 344.43, 270.02 and 223.21 mg g-1 for Cr(VI), Pb(II) and Fe(III), respectively, based on the Langmuir isotherm study. The thermodynamics study revealed that the interaction between the metal ions and the composite beads was spontaneous and endothermic. The FG/Zr-AIPA composite beads exhibited good reusability for the removal of Cr(VI), Pb(II) and Fe(III). The results open new possibilities for the preparation of polysaccharide MOF-based composite beads which exhibit substantial potential for water treatment applications.

Transport Properties in Multicomponent Systems Containing Cyclodextrins and Nickel Ions

In this work, we propose a comprehensive experimental study of the diffusion of nickel ions in combination with different cyclodextrins as carrier molecules for enhanced solubility and facilitated transport. For this, ternary mutual diffusion coefficients measured by Taylor dispersion method are reported for aqueous solutions containing nickel salts and different cyclodextrins (that is, α-CD, β-CD, and γ-CD) at 298.15 K. A combination of Taylor dispersion and other methods, such as UV-vis spectroscopy, will be used to obtain complementary information on these systems. The determination of the physicochemical properties of these salts with CDs in aqueous solution provides information that allows us to understand solute-solvent interactions, and gives a significant contribution to understanding the mechanisms underlying diffusional transport in aqueous solutions, and, consequently, to mitigating the potential toxicity associated with these metal ions. For example, using mutual diffusion data, it is possible to estimate the number of moles of each ion transported per mole of the cyclodextrin driven by its own concentration gradient.

On Interactions of Sulfamerazine with Cyclodextrins from Coupled Diffusometry and Toxicity Tests

This scientific study employs the Taylor dispersion technique for diffusion measurements to investigate the interaction between sulfamerazine (NaSMR) and macromolecular cyclodextrins (β-CD and HP-β-CD). The results reveal that the presence of β-CD influences the diffusion of the solution component, NaSMR, indicating a counterflow of this drug due to solute interaction. However, diffusion data indicate no inclusion of NaSMR within the sterically hindered HP-β-CD cavity. Additionally, toxicity tests were conducted, including pollen germination (Actinidia deliciosa) and growth curve assays in BY-2 cells. The pollen germination tests demonstrate a reduction in sulfamerazine toxicity, suggesting potential applications for this antimicrobial agent with diminished adverse effects. This comprehensive investigation contributes to a deeper understanding of sulfamerazine-cyclodextrin interactions and their implications for pharmaceutical and biological systems.

Advanced manufacturing of nanoparticle formulations of drugs and biologics using microfluidics

Numerous innovative nanoparticle formulations of drugs and biologics, named nano-formulations, have been developed in the last two decades. However, methods for their scaled-up production are still lagging, as the amount needed for large animal tests and clinical trials is typically orders of magnitude larger. This manufacturing challenge poses a critical barrier to successfully translating various nano-formulations. This review focuses on how microfluidics technology has become a powerful tool to overcome this challenge by synthesizing various nano-formulations with improved particle properties and product purity in large quantities. This microfluidic-based manufacturing is enabled by microfluidic mixing, which is capable of the precise and continuous control of the synthesis of nano-formulations. We further discuss the specific applications of hydrodynamic flow focusing, a staggered herringbone micromixer, a T-junction mixer, a micro-droplet generator, and a glass capillary on various types of nano-formulations of polymeric, lipid, inorganic, and nanocrystals. Various separation and purification microfluidic methods to enhance the product purity are reviewed, including acoustofluidics, hydrodynamics, and dielectrophoresis. We further discuss the challenges of microfluidics being used by broader research and industrial communities. We also provide future outlooks of its enormous potential as a decentralized approach for manufacturing nano-formulations.

Construction of intelligent drug delivery system based on polysaccharide-derived polymer micelles: A review

Micelles are nanostructures developed via the spontaneous assembly of amphiphilic polymers in aqueous systems, which possess the advantages of high drug stability or active-ingredient solubilization, targeted transport, controlled release, high bioactivity, and stability. Polysaccharides have excellent water solubility, biocompatibility, and degradability, and can be modified to achieve a hydrophobic core to encapsulate hydrophobic drugs, improve drug biocompatibility, and achieve regulated delivery of the loaded drug. Micelles drug delivery systems based on polysaccharides and their derivatives show great potential in the biomedical field. This review discusses the principles of self-assembly of amphiphilic polymers and the formation of micelles; the preparation of amphiphilic polysaccharides is described in detail, and an overview of common polysaccharides and their modifications is provided. We focus on the review of strategies for encapsulating drugs in polysaccharide-derived polymer micelles (PDPMs) and building intelligent drug delivery systems. This review provides new research directions that will help promote future research and development of PDPMs in the field of drug carriers.

Citric acid cross-linked β-cyclodextrins: A review of preparation and environmental/biomedical application

The β-cyclodextrins (β-CD) are biocompatible macrocyclic candidates for the preparation of various composites with enhanced functions. While nontoxic and biodegradable citric acid (CA) is the favorite crosslinking agent for fabricating hierarchical advanced structures. The carboxyl and hydroxyl groups on CA can serve as "structural bridges" and enhance the solubility of β-CD. Leading to the construction of CA cross-linked β-CD with marvelous complicated structures and targeted functions. Here, we directly categorized the grafted composite materials into two main types such as organic and inorganic materials. Particularly, some representative composite materials are listed and analyzed in detail according to their preparation, advantages of unique characteristics, as well as the possible applications in environmental and biomedical fields such as adsorption of pollutants, sensors, and biomedical applications.

Zirconium-Coated β-Cyclodextrin Nanomaterials for Biofilm Eradication

Under alkaline treatment, zirconyl chloride (ZrOCl2.8H2O) became a zirconia gel and formed a stable complex with beta-cyclodextrin (βCD). This complex was highly active in reactive oxygen species (ROS) formation via H2O2 decomposition. Its surface with numerous hydroxyl groups acts as an ionic sponge to capture the charged reaction intermediates, including superoxide (O2-•) and the hydroxyl radical (•OH). ROS, especially •OH radicals, are harmful to living microorganisms because of their kinetic instability, high oxidation potential, and chemical nonselectivity. Therefore, •OH radicals can engage in fast reactions with virtually any adjacent biomolecule. With H2O2, the complex with cationic and hydrophobic moieties interacted with the anionic bacterial membrane of two Gram-positive (Staphylococcus aureus and S. epidermidis) and two Gram-negative (Escherichia coli and Klebsiella pneumoniae) strains. The Zr-βCD-H2O2 also eradicated more than 99% of the biofilm of these four pathogens. Considering the difficult acquisition of resistance to the oxidation of •OH, the results suggested that this βCD-based nanomaterial might be a promising agent to target both drug-resistant pathogens with no cytotoxicity and exceptional antimicrobial activity.

β-Cyclodextrin-Stabilized CuO/MXene Nanocomposite as an Electrode Material for High-Performance Supercapacitors

Supercapacitors are the best energy storage systems due to their high power density, quick charge/discharge rate, and long-term reliability. In this study, β-cyclodextrin-stabilized CuO nanoparticles (CuO@βCD NPs) were synthesized through a simple reduction method and anchored on the surface of MXene nanosheets in three different proportions (1:1, 4:1, and 1:4) to obtain CuO@βCD/MXene nanocomposites through the wet-impregnation method. The formation of CuO@βCD NPs and their physicochemical characteristics were verified by XRD, XPS, FE-SEM, and HR-TEM analysis. The actual focus is on the evaluation of the electrochemical performances of CuO@βCD, MXene, and CuO@βCD/MXene nanocomposites for supercapacitor applications. The cyclic voltammetry and galvanostatic charge-discharge analysis revealed the pseudocapacitance and an improved specific capacitance of 1693.43 F g-1 at 0.90 A g-1 for the CuO@βCD/MXene (1:1) nanocomposite. The electrochemical impedance analysis displays superior electrical conductivity with a low charge transfer resistance value on incorporating CuO@βCD between the MXene layers. Furthermore, the CuO@βCD/MXene (1:1) nanocomposite exhibited improved long-term cycling stability by retaining 86% of its initial specific capacitance even after the 10,000th cycle at the current density of 4.54 A g-1. Based on the electrochemical performance, the CuO@βCD/MXene (1:1) nanocomposite proves its suitability as an electrode material for supercapacitor application with long-term cycling stability and rate capability.

Ionophore-Based Polymeric Sensors for Potentiometric Assay of the Anticancer Drug Gemcitabine in Pharmaceutical Formulation: A Comparative Study

Gemcitabine is a chemotherapeutic agent used to treat various malignancies, including breast and bladder cancer. In the current study, three innovative selective gemcitabine hydrochloride sensors are developed using 4-tert-butylcalix-[8]-arene (sensor 1), β-cyclodextrin (sensor 2), and γ-cyclodextrin (sensor 3) as ionophores. The three sensors were prepared by incorporating the ionophores with o-nitrophenyl octyl ether as plasticizer and potassium tetrakis(4-chlorophenyl) borate as ionic additive into a polyvinyl chloride polymer matrix. These sensors are considered environmentally friendly systems in the analytical research. The linear responses of gemcitabine hydrochloride were in the concentration range of 6.0 × 10-6 to 1.0 × 10-2 mol L-1 and 9.0 × 10-6 to 1.0 × 10-2 mol L-1 and 8.0 × 10-6 to 1.0 × 10-2 mol L-1 for sensors 1, 2, and 3, respectively. Over the pH range of 6-9, fast-Nernst slopes of 52 ± 0.6, 56 ± 0.3, and 55 ± 0.8 mV/decade were found in the same order with correlation regressions of 0.998, 0.999, and 0.998, respectively. The lower limits of detection for the prepared sensors were 2.5 × 10-6, 2.2 × 10-6, and 2.7 × 10-6 mol L-1. The sensors showed high selectivity and sensitivity for gemcitabine. Validation of the sensors was carried out in accordance with the requirements established by the IUPAC, while being inexpensive and easy to use in drug formulation. A statistical analysis of the methods in comparison with the official method showed that there was no significant difference in accuracy or precision between them. It was shown that the new sensors could selectively and accurately find gemcitabine hydrochloride in bulk powder, pharmaceutical formulations, and quality control tests. The ionophore-based sensor shows several advantages over conventional PVC membrane sensor sensors regrading the lower limit of detection, and higher selectivity towards the target ion.

NMR spectroscopy to study cyclodextrin-based host-guest assemblies with polynuclear clusters

Natural cyclodextrin (CD) macrocycles are known to form diverse inclusion complexes with a wide variety of organic molecules, but recent work has revealed that inorganic clusters also form multicomponent supramolecular complexes and edifices. Such molecular assemblies exhibit a high degree of organization in solution governed by various chemical processes including molecular recognition, host-guest attraction, hydrophobic repulsion, or chaotropic effect. Nuclear magnetic resonance (NMR) spectroscopy is one of the most efficient and practical analytical techniques to characterize the nature, the strength and the mechanism of these interactions in solution. This review provides a brief overview on recent examples of the contribution of NMR to the characterization of hybrid systems in solution based on CD with polynuclear clusters, including polyoxometalates (POMs), metallic clusters and hydroborate clusters. The focus will be first on using 1H (and 13C) NMR of the host, i.e., CD, to identify the nature of the interactions and measure their strength. Then, 2D NMR methods will be illustrated by DOSY as a means of highlighting the clustering phenomena, and by NOESY/ROESY to evidence the spatial proximity and contact within the supramolecular assemblies. Finally, other NMR nuclei will be selected to probe the inorganic part as a guest molecule. Attention will be paid to classical host-guest complexes Cluster@CD, but also to hierarchical multi-scale, multi-component assemblies such as Cluster@CD@Cluster.

Cyclodextrin-induced phase transformation of cesium copper bromide perovskite

Phase transformation represents a fascinating way to tune the structural and optical properties of metal halide perovskites. Macrocyclic cyclodextrin could trigger transformation of cesium copper bromide, driven by strong interactions of the macrocyclic hydroxyl groups with the perovskite cesium and bromide ions.

Multiple-ion Management of Perovskites by Regulating Spatial Distribution of Hydroxyls in Oligosaccharides

Suppressing migrations of intrinsic and extrinsic ions (e.g., Pb2+ , I- , FA+ /MA+ , and Li+ ) in organic-inorganic hybrid perovskites is critical for alleviating the hysteresis and degradation of perovskite solar cells (PSCs). However, various additives reported for that purpose usually interact with one or two types of those ions, not inhibiting multiple-ion migrations simultaneously. Two oligosaccharides (β-cyclodextrin (β-CD) and maltotetraose (G4)), containing 14 hydroxyls (-OH) with different spatial distributions, for the suppression of multiple-ion migrations in PSCs is herein employed. Compared to linear arrangement of -OH in G4, annular distribution of -OH around wide and narrow rims of β-CD can form supramolecular multi-site interactions in a focal manner with various ions, more effectively capturing and immobilizing these migrated ions. With this multiple-ion management strategy, β-CD-based PSCs exhibit an impressive efficiency of 24.22% with negligible hysteresis and excellent device stability. This work highlights the significances of multi-site interactions and molecular configuration of the additive for inhibiting multi-ion migrations in PSCs.

Synthesis of palladium nanoparticles stabilized on Schiff base-modified ZnO particles as a nanoscale catalyst for the phosphine-free Heck coupling reaction and 4-nitrophenol reduction

Recently, the development of heterogeneous nanocatalytic systems using solid supports has been gaining importance due to some advantages such as easy handling, high thermal stability, high efficiency, reusability, and so on. Therefore, the design of catalyst supports for the preparation of stable heterogeneous catalytic systems is of great importance. In this work, Schiff base-modified ZnO particles have been developed (ZnO-Scb) as a novel support. A heterogeneous nanocatalyst system has then been prepared by immobilizing palladium nanoparticles (Pd NPs) on the ZnO-Scb surface as the support. The resulting palladium nanocatalyst (Pd-ZnO-Scb) structure has been characterized by different analytical techniques (FT-IR, XRD, TEM, FE-SEM, elemental mapping and EDS) and used to catalyze the Heck coupling reactions and 4-nitrophenol (4-NP) reduction. Test results revealed that Pd-ZnO-Scb could effectively couple various aryl halides with styrene in yields of up to 98% in short reaction times. Pd-ZnO-Scb was also efficiently used in the complete 4-NP reduction within 135 s at room temperature. Additionally, it was found that Pd-ZnO-Scb was more effective than other reported catalysts in the Heck coupling reaction. Moreover, the recycling tests indicated that Pd-ZnO-Scb could be easily isolated from the reaction medium and reused in seven consecutive catalytic runs while retaining its nanostructure.

Multifunctional Lipophobic Polymer Dots from Cyclodextrin: Antimicrobial/Anticancer Laborers and Silver Ions Chemo-Sensor

β-Cyclodextrin (CD) is currently exploited for the implantation of lipophobic polymer dots (PDs) for antimicrobial and anticancer laborers. Moreover, the PDs were investigated to act as a chemo-sensor for metal detection. The data revealed that under basic conditions, photoluminescent PDs (5.1 nm) were successively clustered with a controllable size at 190 °C, whereas under acidic conditions, smaller-sized non-photoluminescent carbon nanoparticles (2.9 nm) were obtained. The fluorescence intensity of synthesized PDs under basic conditions was affected by pH, and such an intensity was significantly higher compared to that prepared under acidic conditions. The PDs were exploited as florescent detectors in estimation of Ag⁺ ions in aquatic streams. Treatment of Ag⁺ ion colloids with PDs resulted in fluorescence quenching attributing to the production of AgNPs that approved by spectral studies. The cell viability percent was estimated for Escherichia coli, Staphylococcus aureus, and Candida albicans after incubation with PDs implanted under basic conditions for 24 h. The cell mortality percent was estimated for breast cancer (MCF-7) after incubation with different concentrations of PDs that were implanted under acidic versus basic conditions to show that treatment of the tested cells with 1000 μg/mL PDs prepared under basic (IC50 232.5 μg/mL) and acidic (IC₅₀ 88.6 μg/mL) conditions resulted in cell mortality percentages of 70 and 90%, respectively.

Noncovalent tailoring of coordination complexes by resorcin[4]arene-based supramolecular hosts

Molecular recognition of guest molecules in a confined cavity is one of the important phenomena in biological and artificial molecular systems. When the guest is trapped within an artificial nano-space, its conformation is fixed in an unusual fashion by noncovalent interactions with host frameworks, and also the guest is kept away from the bulk solvent by the steric effect of the host. Therefore, host-guest formations lead to the effective modulation of the chemical and physical properties of guests via noncovalent interactions. In contrast to the many examples of organic guests, the examples of host-guest formation using coordination complex guests have been less explored. This is simply due to the size and shape complementarity problem between small hosts and large coordination complex guests. Resorcin[4]arene-based supramolecular hosts have been shown to provide internal cavities that are large enough to fully accommodate coordination complexes within the internal spaces via effective molecular interactions. In this article, we focus on supramolecular strategies to control the chemical and physical properties of the coordination complex guests within resorcin[4]arene-based supramolecular hosts. By the careful selection of the host and guest complexes, these combinations can produce a new supramolecular system, showing unusual structures, redox, catalytic, and photophysical properties derived from the entrapped coordination complexes.

Recent Development of Supramolecular Cancer Theranostics Based on Cyclodextrins: A Review

With the development of personalized medical demands for precise diagnosis, rational management and effective cancer treatment, supramolecular theranostic systems have received widespread attention due to their reversibly switchable structures, sensitive response to biological stimuli and integration ability for multiple capabilities in a single platform with a programmable fashion. Cyclodextrins (CDs), benefiting from their excellent characteristics, such as non-toxicity, easy modification, unique host-guest properties, good biocompatibility, etc., as building blocks, serve as an all-purpose strategy for the fabrication of a supramolecular cancer theranostics nanodevice that is capable of biosafety, controllability, functionality and programmability. This review focuses on the supramolecular systems of CD-bioimaging probes, CD-drugs, CD-genes, CD-proteins, CD-photosensitizers and CD-photothermal agents as well as multicomponent cooperation systems with regards to building a nanodevice with functions of diagnosis and (or) therapeutics of cancer treatment. By introducing several state-of-the-art examples, emphasis will be placed on the design of various functional modules, the supramolecular interaction strategies under the fantastic topological structures and the hidden "bridge" between their structures and therapeutic efficacy, aiming for further comprehension of the important role of a cyclodextrin-based nanoplatform in advancing supramolecular cancer theranostics.

The structure and modified properties of a self-dimerised Cu(II) inclusion complex in γ-cyclodextrins

Inclusion structures incorporating more than one guest molecule are elusive because confinement alters their molecular properties. We report the solid-state characterization of an inclusion complex comprising two γ-cyclodextrins and two [Cu(2-pyridinemethanolate)(2-pyridinemethanol)]PF₆ units. Quantum calculation reveals that interfragment charge transfer occurs. The confined Cu fragment and the unincluded "linear chain [Cu(2-pyridinemethanolate)(2-pyridinemethanol)]PF₆" exhibit different properties.

High-efficiency gold recovery by additive-induced supramolecular polymerization of β-cyclodextrin

Developing an eco-friendly, efficient, and highly selective gold-recovery technology is urgently needed in order to maintain sustainable environments and improve the utilization of resources. Here we report an additive-induced gold recovery paradigm based on precisely controlling the reciprocal transformation and instantaneous assembly of the second-sphere coordinated adducts formed between β-cyclodextrin and tetrabromoaurate anions. The additives initiate a rapid assembly process by co-occupying the binding cavity of β-cyclodextrin along with the tetrabromoaurate anions, leading to the formation of supramolecular polymers that precipitate from aqueous solutions as cocrystals. The efficiency of gold recovery reaches 99.8% when dibutyl carbitol is deployed as the additive. This cocrystallization is highly selective for square-planar tetrabromoaurate anions. In a laboratory-scale gold-recovery protocol, over 94% of gold in electronic waste was recovered at gold concentrations as low as 9.3 ppm. This simple protocol constitutes a promising paradigm for the sustainable recovery of gold, featuring reduced energy consumption, low cost inputs, and the avoidance of environmental pollution.

Light-driven redox deracemization of indolines and tetrahydroquinolines using a photocatalyst coupled with chiral phosphoric acid

The integration of oxidation and enantioselective reduction enables a redox deracemization to directly access enantioenriched products from their corresponding racemates. However, the solution of the kinetically microscopic reversibility of substrates used in this oxidation/reduction unidirectional event is a great challenge. To address this issue, we have developed a light-driven strategy to enable an efficient redox deracemization of cyclamines. The method combines a photocatalyst and a chiral phosphoric acid in a toluene/aqueous cyclodextrin emulsion biphasic co-solvent system to drive the cascade out-of-equilibrium. Systemic optimizations achieve a feasible oxidation/reduction cascade sequence, and mechanistic investigations demonstrate a unidirectional process. This single-operation cascade route, which involves initial photocatalyzed oxidation of achiral cyclamines to cyclimines and subsequent chiral phosphoric acid-catalyzed enantioselective reduction of cyclimines to chiral cyclamines, is suitable for constructing optically pure indolines and tetrahydroquinolines.

Solvated electron-induced synthesis of cyclodextrin-coated Pd nanoparticles: mechanistic, catalytic, and anticancer studies

Herein, using in situ generated solvated electrons in the reaction media, a highly time-efficient, one-pot green approach has been employed to synthesize palladium (Pd) nanoparticles (NPs) coated with a molecular assembly of α-cyclodextrin (α-CD). The appearance of a shoulder peak at 280 nm in the UV-Vis absorption spectra indicated the formation of Pd NPs, which was further confirmed from their cubic phase XRD pattern. The nanomorphology varied considerably as a function of the dose rate, wherein sphere-shaped NPs (average size ∼ 7.6 nm) were formed in the case of high dose rate electron-beam assisted synthesis, while nanoflakes self-assembled to form nanoflower-shaped morphologies in a γ-ray mediated approach involving a low dose rate. The formation kinetics of NPs was investigated by pulse radiolysis which revealed the formation of Pd-based transients by the solvated electron-induced reaction. Importantly, no interference of α-CD was observed in the kinetics of the transient species, rather it played the role of a morphology directing agent in addition to a biocompatible stabilizing agent. The catalytic studies revealed that the morphology of the NPs has a significant effect on the reduction efficiency of 4-nitrophenol to 4-aminophenol. Another important highlight of this work is the demonstration of the morphology-dependent anticancer efficacy of Pd NPs against lung and brain cancer cells. Notably, flower-shaped Pd NPs exhibited significantly higher cancer cell killing as compared to spherical NPs, while being less toxic towards normal lung fibroblasts. Nonetheless, these findings show the promising potential of Pd NPs in anticancer treatment.

Self-Assembly of Cyclodextrin-Coated Nanoparticles:Fabrication of Functional Nanostructures for Sensing and Delivery

In recent years, the bottom-up approach has emerged as a powerful tool in the fabrication of functional nanomaterials through the self-assembly of nanoscale building blocks. The cues embedded at the molecular level provide a handle to control and direct the assembly of nano-objects to construct higher-order structures. Molecular recognition among the building blocks can assist their precise positioning in a predetermined manner to yield nano- and microstructures that may be difficult to obtain otherwise. A well-orchestrated combination of top-down fabrication and directed self-assembly-based bottom-up approach enables the realization of functional nanomaterial-based devices. Among the various available molecular recognition-based "host-guest" combinations, cyclodextrin-mediated interactions possess an attractive attribute that the interaction is driven in aqueous environments, such as in biological systems. Over the past decade, cyclodextrin-based specific host-guest interactions have been exploited to design and construct structural and functional nanomaterials based on cyclodextrin-coated metal nanoparticles. The focus of this review is to highlight recent advances in the self-assembly of cyclodextrin-coated metal nanoparticles driven by the specific host-guest interaction.

Efficient Recognition and Removal of Persistent Organic Pollutants by a Bifunctional Molecular Material

Persistent organic pollutants (POPs) exist widely in the environment and place significant impact on human health by bioaccumulation. Efficient recognition of POPs and their removal are highly challenging tasks because their specific structures interact often very weakly with the capture materials. Herein, a molecular nanocage (1) is studied as an efficient sensing and sorbent material for POPs, which is demonstrated by a representative and stable perfluorooctane sulfonate (PFOS) substrate containing a hydrophilic sulfonic group and a hydrophobic fluoroalkyl chain. A highly sensitive and unusual turn-on fluorescence response within 10 s and a 97% total removal of PFOS from water in 20 min have been achieved owing to the strong host-guest interactions between 1 and PFOS. The binding constant of 1 to PFOS is 2 orders of magnitude higher than state-of-the-art adsorbents for PFOS and thus represents a new benchmark material for the recognition and removal of PFOS. The host-guest interaction has been elucidated by solid-state NMR spectroscopy and single-crystal X-ray diffraction, which provide key insights at a molecular level for the design of new advanced sensing/sorbent materials for POPs.

MXenes Functionalized with Macrocyclic Hosts: From Molecular Design to Applications

Two-dimensional (2D) MXene has aroused wide attention for its excellent physical and chemical properties. The interlayer engineering formed by layer-by-layer stacking of MXene nanosheets can be employed for molecular sieving and water purification by incorporating specific groups onto the exterior surface of MXene. Macrocyclic hosts exhibiting unique structural features and recognition ability can construct smart devices for external stimuli with reversible features between macrocycles and guests. On that basis, macrocyclic hosts can be anchored to MXene to provide numerous insights into their compositions and intercalation states. In this review, the MXene prepared based on macrocyclic hosts from molecular design to applications is highlighted. Various MXenes functionalized with macrocyclic hosts are empowered in functional membrane (including water purification, organic solvent nanofiltration, and electromagnetic shielding), photocatalysis, sensing, and adsorption (interactions with specific guest). Hopefully, this review can bring new inspiration to the design of multifunctional MXene-based materials and improving its practical applications.

Supramolecular hybrids of chiral Waugh polyoxometalate with cyclodextrins

The development of novel systems for chiral polyoxometalates (POMs) is an attractive research field because of their fascinating topological structures and well-defined functions. Herein, we have developed a new reaction route for the synthesis of two unprecedented chiral Waugh POM-based supramolecular architectures. Single-crystal X-ray diffraction reveals that the architectures exhibit a wavy three-dimensional framework and bamboo-rod-connected framework upon regulating the size of the cyclodextrin and the stacking pattern of the D₃ symmetric Waugh {MnMo₉}. Solution studies using NMR, circular dichroism and isothermal titration calorimetry corroborate nicely the very weak interactions between the components. The intricate chiral microenvironment originating from the hybrid frameworks may be responsible for the selective recognition of the Λ-{MnMo₉} enantiomer. This study highlights the importance of the asymmetric configuration of the POM for designing CD/POM assemblies and understanding their chirality.

Facet and d-band center engineering of CuNi nanocrystals for efficient nitrate electroreduction to ammonia

Electrocatalytic nitrate reduction offers a sustainable route to ammonia synthesis and wastewater treatment. However, the nitrate-to-ammonia conversion remains inefficient due to the sluggish kinetics and diverse side reactions. Herein, well-faceted CuNi nanocrystals with Ni-rich surfaces and favorable d-band centres were synthesized with the assistance of γ-cyclodextrin via a solvothermal process. When used as catalysts for nitrate electroreduction, they delivered an ammonia yield of 1.374 mmol h^-1 mg^-1 (0.5496 mmol h^-1 cm^-2) at -0.3 V with the faradaic efficiency and selectivity reaching 94.5% and 65.0%, respectively, surpassing pure Cu or Ni nanocrystals and most reported catalysts. Such excellent performances originated from the optimal geometric and electronic structures and special element distribution, which optimized the adsorption behaviors and accelerated the reaction kinetics. A NO₃^--NO₂^--NH₃ pathway was proposed with the chemical process following the initial electron transfer process as the rate-determining step. This work sheds light on the design of efficient catalysts to achieve carbon neutrality through simultaneous geometric and electronic structure modulation.

Effect of a Novel Hybrid Nanocomposite of Cisplatin-Chitosan on Induced Tissue Injury as a Suggested Drug by Reducing Cisplatin Side Effects

The self-assembly of cisplatin (Cis-Pt) and chitosan nanoparticles (Cs NPs) has been synthesized and characterized successfully by different analyses and techniques, such as scanning electron microscopy, ultraviolet-visible spectrophotometry, and Fourier transform infrared spectroscopy. The efficiency of loading Cis-Pt on Cs NPs for decreasing the side effects of Cis-Pt by loading it on Cs NP surface was revealed through histopathological and physiological measurements for the liver, testis, and kidney cells. Self-assembly hybrid nanocomposite (Cis-Pt@Cs) could improve spermatogenic cells, seminiferous tubules, and Leydig cells in the interstitial tissue. Kidney examination showed intact glomeruli with a mild increase in capsular space in addition to the intact renal tubular epithelial lining, and liver findings showed improvement in dilation and congestion of the central vein besides mild dilation of blood sinusoids in addition to a mild degree of hepatocyte vacuolation. The serum levels of hepatic, renal, and testicular marker analysis were measured, where Cis-Pt increased the serum levels of alanine aminotransferase, aspartate aminotransferase activity, urea, creatinine, and decreased testosterone levels, while synthesized self-assembly appeared normalized levels. From the results, the self-assembly hybrid nanocomposite decreases and improves the side effects of Cis-Pt.

TiO2 Nanocrystals and Annona crassiflora Polyphenols Used Alone or Mixed Impact Differently on Wound Repair

Wounds treated with TiO2 nanoparticles (TiO2-NPs) show an improvement in healing time. However, little is known about the parameters that can contribute to this result. On the other hand, the treatment of wounds with polyphenols is widely known. These compounds are found in the peel of Annona crassiflora fruit and have antioxidant, analgesic and anti-inflammatory properties. In this study, we evaluated the healing effect of TiO2 nanocrystals (TiO2-NCs), polyphenolic fractions obtained from ethanolic extract of A. crassiflora fruit peel (PFAC) and mix (PFAC + TiO2-NCs) on the parameters of wound closure, inflammation, collagen deposition, metalloproteinase activity (MMPs) and angiogenesis. TiO2-NCs and PFAC have activity for wound healing, showed anti-inflammatory action and a shorter wound closure time. These treatments also contributed to increased collagen deposition, while only treatment with TiO2-NCs increased MMP-2 activity, parameters essential for the migration of keratinocytes and for complete restoration of the injured tissue. The combination of PFAC + TiO2-NCs reduced the effectiveness of individual treatments by intensifying the inflammatory process, in addition to delaying wound closure. We conclude that the interaction between the hydroxyl groups of PFAC polyphenols with TiO2-NCs may have contributed to difference in the healing activity of skin wounds.

Boosting the Kinetics and Stability of Zn Anodes in Aqueous Electrolytes with Supramolecular Cyclodextrin Additives

The hydrophobic internal cavity and hydrophilic external surface of cyclodextrins (CDs) render promising electrochemical applications. Here, we report a comparative and mechanistic study on the use of CD molecules (α-, β-, and γ-CD) as electrolyte additives for rechargeable Zn batteries. The addition of α-CD in aqueous ZnSO₄ solution reduces nucleation overpotential and activation energy of Zn plating and suppresses H₂ generation. Computational, spectroscopic, and electrochemical studies reveal that α-CD preferentially adsorbs in parallel on the Zn surface via secondary hydroxyl groups, suppressing water-induced side reactions of hydrogen evolution and hydroxide sulfate formation. Additionally, the hydrophilic exterior surface of α-CD with intense electron density simultaneously facilitates Zn²⁺ deposition and alleviates Zn dendrite formation. A formulated 3 M ZnSO₄ + 10 mM α-CD electrolyte enables homogenous Zn plating/stripping (average Coulombic efficiency ∼ 99.90%) at 1 mA cm^-2 in Zn|Cu cells and a considerable capacity retention of 84.20% after 800 cycles in Zn|V₂O₅ full batteries. This study provides insight into the use of supramolecular macrocycles to modulate and enhance the interface stability and kinetics of metallic anodes for aqueous battery chemistry.

Porphyrin-Based Multicomponent Metallacage: Host-Guest Complexation toward Photooxidation-Triggered Reversible Encapsulation and Release

The development of supramolecular hosts with effective host-guest properties is crucial for their applications. Herein, we report the preparation of a porphyrin-based metallacage, which serves as a host for a series of polycyclic aromatic hydrocarbons (PAHs). The association constant between the metallacage and coronene reaches 2.37 × 107 M-1 in acetonitrile/chloroform (ν/ν = 9/1), which is among the highest values in metallacage-based host-guest complexes. Moreover, the metallacage exhibits good singlet oxygen generation capacity, which can be further used to oxidize encapsulated anthracene derivatives into anthracene endoperoxides, leading to the release of guests. By employing 10-phenyl-9-(2-phenylethynyl)anthracene whose endoperoxide can be converted back by heating as the guest, a reversible controlled release system is constructed. This study not only gives a type of porphyrin-based metallacage that shows desired host-guest interactions with PAHs but also offers a photooxidation-responsive host-guest recognition motif, which will guide future design and applications of metallacages for stimuli-responsive materials.

Mechanism and Kinetic Study of Cyclodextrin Use to Facilitate NO2 Absorption in Sulfite Solutions

An innovative strategy to control nitrogen oxide emission from flue gas was developed using the wet flue gas denitrification technology. The use of cyclodextrin (CD) as an additive facilitated NO₂ absorption by the sulfite absorbent. Compared with absorption by a sulfite solution (59.12%), the instantaneous absorption efficiencies employing CD improved to 94.57%. Moreover, 48 h of continuous absorption indicated cyclic utilization of CD. The favorable role of CD was ascribed to facilitating the limiting step for the entire NO₂ absorption-dissolution process which included both water solubility and gas-liquid mass transfer. Furthermore, we propose a potential mechanism of CD/sulfite mixed solution absorbing NO₂, among which the favorable role of the additive is related to its amphiphilic behavior toward gas and liquid phases. Additionally, a kinetic model describing the rates of gas-liquid transfer and macro absorption was established based on various operating conditions. This model explains the absorption improvement in the kinetic aspect and provides theoretical guidance for practical applications.

Noninvasive and Individual-Centered Monitoring of Uric Acid for Precaution of Hyperuricemia via Optical Supramolecular Sensing

Characterized by an excessively increased uric acid (UA) level in serum, hyperuricemia induces gout and also poses a great threat to renal and cardiovascular systems. It is urgent and meaningful to perform early warning by noninvasive diagnosis, thus conducing to blockage of disease aggravation. Here, guanidinocalix[5]arene (GC5A) is successfully identified from the self-built macrocyclic library to specifically monitor UA from urine by the indicator displacement assay. UA is strongly bound to GC5A at micromolar-level, while simultaneously excluding fluorescein (Fl) from the GC5A·Fl complex in the "switch-on" mode. This method successfully differentiates patients with hyperuricemia from volunteers except for those with kidney dysfunction and targets a volunteer at high risk of hyperuricemia. In order to meet the trend from hospital-centered to individual-centered testing, visual detection of UA is studied through a smartphone equipped with a color-scanning feature, whose adaptability and feasibility are demonstrated in sensing UA from authentic urine, leading to a promising method in family-centered healthcare style. A high-throughput and visual detection method is provided here for alarming hyperuricemic by noninvasive diagnosis.

Multicharged cyclodextrin supramolecular assemblies

Multicharged cyclodextrin (CD) supramolecular assemblies, including those based on positively/negatively charged modified mono-6-deoxy-CDs, per-6-deoxy-CDs, and random 2,3,6-deoxy-CDs, as well as parent CDs binding positively/negatively charged guests, have been extensively applied in chemistry, materials science, medicine, biological science, catalysis, and other fields. In this review, we primarily focus on summarizing the recent advances in positively/negatively charged CDs and parent CDs encapsulating positively/negatively charged guests, especially the construction process of supramolecular assemblies and their applications. Compared with uncharged CDs, multicharged CDs display remarkably high antiviral and antibacterial activity as well as efficient protein fibrosis inhibition. Meanwhile, charged CDs can interact with oppositely charged dyes, drugs, polymers, and biomacromolecules to achieve effective encapsulation and aggregation. Consequently, multicharged CD supramolecular assemblies show great advantages in improving drug-delivery efficiency, the luminescence properties of materials, molecular recognition and imaging, and the toughness of supramolecular hydrogels, in addition to enabling the construction of multistimuli-responsive assemblies. These features are anticipated to not only promote the development of CD-based supramolecular chemistry but also contribute to the rapid exploitation of these assemblies in diverse interdisciplinary applications.

Evolving era of "sponges": Nanosponges as a versatile nanocarrier for the effective skin delivery of drugs

BACKGROUND

Nanosponge, as a carrier for skin delivery system for drugs, plays a vital role. It not only serves to administer the drug to the targeted layer of skin but also increases the drug retention and deposition on the skin.

OBJECTIVE

In this review, we aim to highlight the effects of several process and formulation variables prompting the characteristics of various nanosponges for the delivery of drugs into/ across the skin.

METHOD

In the present review article, over-all introduction of nanosponges, its preparation, characterstics features, advanatges, disadvantages, factors affecting their preparation are covered. Furthermore, an elaborative description of nanosponges for skin delivery and its toxicological perspective with some referential examples of nanosponge drugs have also been deliberated here.

RESULTS

Factors associated with the formation of nanosponges can directly or indirectly affect its efficacy in skin delivery of drugs. These nanoforms are efficient in delivering the drugs which possess lower aqueous solubility, therefore, the aqueous solubility of drugs possessing a narrow therapeutic window can easily be enhanced. It also helps in achieving targeted drug delivery, controlled release of drugs, increases bioavailability, reduces drug toxicity, decreases drug degradation, and many more.

CONCLUSION

Nanosponges have been identified as a potential drug delivery carriers into as well as across skin. Delivery of biologics such as vaccines, enzymes, peptides, proteins, and antibodies, is also gaining attention in the recent past.