31P NMR Chemical Shifts of Phosphorus Probes as Reliable and Practical Acidity Scales for Solid and Liquid Catalysts

Surface-Assisted Selective Air Oxidation of Phosphines Adsorbed on Activated Carbon

Trialkyl- and triarylphosphines readily adsorb onto the surface of porous activated carbon (AC) even in the absence of solvents through van der Waals interactions between the lone electron pair and the AC surface. This process has been proven by solid-state NMR techniques. Subsequently, it is demonstrated that the AC enables the fast and selective oxidation of adsorbed phosphines to phosphine oxides at ambient temperature in air. In solution, trialkylphosphines are oxidized to a variety of P(V) species when exposed to the atmosphere, while neat or dissolved triarylphosphines cannot be oxidized with air. When the trialkyl- and triarylphosphines PnBu3 (1), PEt3, (2), PnOct3 (3), PMetBu2 (4), PCy3 (5), and PPh3 (6) are adsorbed in a mono- or submonolayer on the surface of AC, in the absence of a solvent and at ambient temperature, they are quantitatively oxidized to the adsorbed phosphine oxides, 1ox-6ox, once air is admitted. No formation of any unwanted P(V) side products or water adducts is observed. The phosphine oxides can then be recovered in good yields by washing them off of the AC. The oxidation is likely facilitated by a radical activation of molecular oxygen due to delocalized electrons on the aromatic surface coating of AC, as proven by ESR. This easy and inexpensive oxidation method renders hydrogen peroxide or other oxidizers unnecessary and is broadly applicable to sterically hindered and even to air-stable triarylphosphines. Phosphines adsorbed at lower surface coverages on AC oxidize at a faster rate. All oxidation reactions were monitored by solution- and solid-state NMR spectroscopy.

Cu(dppf) complexes can be synthesized from Cu-exchanged solids and enable a quantification of the Cu-accessibility by 31P MAS NMR spectroscopy

Herein, we apply three different copper-exchanged materials (Na-[Al]SBA-15, silica, Na-MCM-22) as hosts for a direct synthesis of CuI(1,1'-bis(diphenylphosphino)ferrocene = dppf) complexes in cationic ion exchange position. Using 31P MAS NMR spectroscopy, we show that identical complexes as after ion exchange are generated if the solids are applied as reactants directly. The homogeneity of copper exchanges is evaluated by EDX spectroscopy. Both CuI and CuII result in the formation of complexes, thereby oxidizing dppf. Cu-particles were not reactive. Optimized conditions for a maximized complex formation are identified applying quantitative 31P MAS NMR spectroscopy and ICP-OES. Only accessible copper in cationic position of the solids forms the complexes. This enables a quantification of the amount of copper in mesopores vs. the total copper amount. Thus, besides a new synthesis of the complex a suitable method for quantitative elucidation of the location of copper cations is demonstrated herein.

The Overlooked Potential of Sulfated Zirconia: Reexamining Solid Superacidity Toward the Controlled Depolymerization of Polyolefins

Closed-loop recycling via an efficient chemical process can help alleviate the global plastic waste crisis. However, conventional depolymerization methods for polyolefins, which compose more than 50% of plastics, demand high temperatures and pressures, employ precious noble metals, and/or yield complex mixtures of products limited to single-use fuels or oils. Superacidic forms of sulfated zirconia (SZrO) with Hammet Acidity Functions (H0) ≤ - 12 (i.e., stronger than 100% H2SO4) are industrially deployed heterogeneous catalysts capable of activating hydrocarbons under mild conditions and are shown to decompose polyolefins at temperatures near 200 °C and ambient pressure. Additionally, confinement of active sites in porous supports is known to radically increase selectivity, coking and sintering resistance, and acid site activity, presenting a possible approach to low-energy polyolefin depolymerization. However, a critical examination of the literature on SZrO led us to a surprising conclusion: despite 40 years of catalytic study, engineering, and industrial use, the surface chemistry of SZrO is poorly understood. Ostensibly spurred by SZrO's impressive catalytic activity, the application-driven study of SZrO has resulted in deleterious ambiguity in requisite synthetic conditions for superacidity and insufficient characterization of acidity, porosity, and active site structure. This ambiguity has produced significant knowledge gaps surrounding the synthesis, structure, and mechanisms of hydrocarbon activation for optimized SZrO, stunting the potential of this catalyst in olefin cracking and other industrially relevant reactions, such as isomerization, esterification, and alkylation. Toward mitigating these long extant issues, we herein identify and highlight these current shortcomings and knowledge gaps, propose explicit guidelines for characterization of and reporting on characterization of solid acidity, and discuss the potential of pore-confined superacids in the efficient and selective depolymerization of polyolefins.

Advanced solid-state NMR spectroscopy and its applications in zeolite chemistry

Solid-state NMR spectroscopy (ssNMR) can provide details about the structure, host-guest/guest-guest interactions and dynamic behavior of materials at atomic length scales. A crucial use of ssNMR is for the characterization of zeolite catalysts that are extensively employed in industrial catalytic processes. This review aims to spotlight the recent advancements in ssNMR spectroscopy and its application to zeolite chemistry. We first review the current ssNMR methods and techniques that are relevant to characterize zeolite catalysts, including advanced multinuclear and multidimensional experiments, in situ NMR techniques and hyperpolarization methods. Of these, the methodology development on half-integer quadrupolar nuclei is emphasized, which represent about two-thirds of stable NMR-active nuclei and are widely present in catalytic materials. Subsequently, we introduce the recent progress in understanding zeolite chemistry with the aid of these ssNMR methods and techniques, with a specific focus on the investigation of zeolite framework structures, zeolite crystallization mechanisms, surface active/acidic sites, host-guest/guest-guest interactions, and catalytic reaction mechanisms.

Surface Chemistry of Biologically Active Reducible Oxide Nanozymes

Reducible metal oxide nanozymes (rNZs) are a subject of intense recent interest due to their catalytic nature, ease of synthesis, and complex surface character. Such materials contain surface sites which facilitate enzyme-mimetic reactions via substrate coordination and redox cycling. Further, these surface reactive sites are shown to be highly sensitive to stresses within the nanomaterial lattice, the physicochemical environment, and to processing conditions occurring as part of their syntheses. When administered in vivo, a complex protein corona binds to the surface, redefining its biological identity and subsequent interactions within the biological system. Catalytic activities of rNZs each deliver a differing impact on protein corona formation, its composition, and in turn, their recognition, and internalization by host cells. Improving the understanding of the precise principles that dominate rNZ surface-biomolecule adsorption raises the question of whether designer rNZs can be engineered to prevent corona formation, or indeed to produce "custom" protein coronas applied either in vitro, and preadministration, or formed immediately upon their exposure to body fluids. Here, fundamental surface chemistry processes and their implications in rNZ material performance are considered. In particular, material structures which inform component adsorption from the application environment, including substrates for enzyme-mimetic reactions are discussed.

Surface-Phosphorylated Ceria for Chlorine-Tolerance Catalysis

An improved fundamental understanding of active site structures can unlock opportunities for catalysis from conceptual design to industrial practice. Herein, we present the computational discovery and experimental demonstration of a highly active surface-phosphorylated ceria catalyst that exhibits robust chlorine tolerance for catalysis. Ab initio molecular dynamics (AIMD) calculations and in situ near-ambient pressure X-ray photoelectron spectroscopy (in situ NAP-XPS) identified a predominantly HPO4 active structure on CeO2(110) and CeO2(111) facets at room temperature. Importantly, further elevating the temperature led to a unique hydrogen (H) atom hopping between coordinatively unsaturated oxygen and the adjacent P═O group of HPO4. Such a mobile H on the catalyst surface can effectively quench the chlorine radicals (Cl•) via an orientated reaction analogous to hydrogen atom transfer (HAT), enabling the surface-phosphorylated CeO2-supported monolithic catalyst to exhibit both expected activity and stability for over 68 days during a pilot test, catalyzing the destruction of a complex chlorinated volatile organic compound industrial off-gas.

Native frustrated Lewis pairs on core-shell In@InOxHy enhances CO2-to-formate conversion

Strategies to efficiently activate CO2 by strongly inhibiting the competitive hydrogen evolution reaction process are highly desired for practical applications of the electrochemical CO2 reduction technique. Here, we assembled a core-shell In@InOxHy architecture on carbon black by one-step reduction of NaBH4 as a CO2-to-formate catalyst with high selectivity. The stable CO2-to-formate reaction originates from the creation of steritic frustrated Lewis pairs (FLPs) on the InOxHy shell with In-OVs (OVs, oxygen vacancies) Lewis acid, and In-OH Lewis base. During CO2 reduction, the electrochemically stable FLPs are capable of first capturing and stabilizing protons to protonate FLPs to In-H Lewis acid and In-OH2 Lewis base due to its strong steric electrostatic field; then, CO2 is captured and activated by the protonated FLPs to selectively produce formate. Our results demonstrated that FLPs can be created on the surface of oxyphilic single-metal catalysts efficient in accelerating CO2 reduction with high selectivity.

Investigation of Brønsted acidity in zeolites through adsorbates with diverse proton affinities

Understanding the adsorption behavior of base probes in aluminosilicates and its relationship to the intrinsic acidity of Brønsted acid sites (BAS) is essential for the catalytic applications of these materials. In this study, we investigated the adsorption properties of base probe molecules with varying proton affinities (acetonitrile, acetone, formamide, and ammonia) within six different aluminosilicate frameworks (FAU, CHA, IFR, MOR, FER, and TON). An important objective was to propose a robust criterion for evaluating the intrinsic BAS acidity (i.e., state of BAS deprotonation). Based on the bond order conservation principle, the changes in the covalent bond between the aluminum and oxygen carrying the proton provide a good description of the BAS deprotonation state. The ammonia and formamide adsorption cause BAS deprotonation and cannot be used to assess intrinsic BAS acidity. The transition from ion-pair formation, specifically conjugated acid/base interaction, in formamide to strong hydrogen bonding in acetone occurs within a narrow range of base proton affinities (812-822 kJ mol^-1). The adsorption of acetonitrile results in the formation of hydrogen-bonded complexes, which exhibit a deprotonation state that follows a similar trend to the deprotonation induced by acetone. This allows for a semi-quantitative comparison of the acidity strengths of BAS within and between the different aluminosilicate frameworks.

Synthesis, Characterization, and Trapping of a Cyclic Diborylcarbene, an Electrophilic Carbene

A carbene bearing two geminal boryl substituents, called diborylcarbene (DBC), has been predicted to be highly Lewis acidic in sharp contrast to the well-studied persistent carbenes stabilized by π-donating substituents. Studies on DBC have been limited to either the base-trapping or theoretical calculations. Herein, we developed chemical equivalents for DBC, namely, K/X-diborylcarbenoids 2_X (X = F or Cl). Treatment of 2_F with Al(C₆F₅)₃ yielded [AlF(C₆F₅)₃]^--stabilized DBC 1-FAl, which showed a significant low-field shift of the carbenoid carbon from 169 ppm (doublet, coupling with ¹⁹F) to 242 ppm (singlet). The loss of halogen was also detected through electrospray ionization time-of-flight mass spectrometry analysis of 2_X only in the presence of Al(C₆F₅)₃. Generated DBC 1 from 1-FAl or 2_Cl was successfully trapped with excess amounts of trialkylphosphines (PR₃, R = Me or Et), which afforded the corresponding DBC-PR₃ adducts. In addition, the Lewis acidity of DBC 1 was evaluated both experimentally and theoretically to reveal that 1 is one of the most Lewis acidic species among neutral molecules.

Mechanistic study of ZnSe nanocrystal formation from zinc halides

We studied the formation of zinc selenide (ZnSe) from zinc chloride (ZnCl2) and trioctylphosphine selenide (TOP=Se) in oleylamine, a chemistry originally proposed to grow ZnSe shells around InP core quantum dots. By monitoring the formation of ZnSe in reactions with and without InP seeds by quantitative absorbance and nuclear magnetic resonance (NMR) spectroscopy, we observe that the ZnSe formation rate is independent of the presence of InP cores. Similar to the seeded growth of CdSe and CdS, this observation supports a ZnSe growth mechanism through the inclusion of reactive ZnSe monomers that form homogeneously in the solution. Furthermore, by combining NMR and mass spectrometry, we identified the dominant reaction products of the ZnSe formation reaction as oleylammonium chloride and amino-substitutions of TOP, i.e., iminophosphoranes (TOP=NR), aminophosphonium chloride salts [TOP(NHR)Cl], and bis(amino)phosphoranes [TOP(NHR)2]. Based on the acquired results, we outline a reaction scheme that involves the complexation of TOP=Se by ZnCl2, followed by the nucleophilic addition of oleylamine onto the Lewis acid activated P-Se bond, thereby eliminating ZnSe monomers and forming amino-substitutions of TOP. Our work highlights the central role of oleylamine, acting as both the nucleophile and Brønsted base, in the transformation of metal halides and alkylphosphine chalcogenides into metal chalcogenides.

Three-dimensional inhomogeneity of zeolite structure and composition revealed by electron ptychography

Structural and compositional inhomogeneity is common in zeolites and considerably affects their properties. Thickness-limited lateral resolution, lack of depth resolution, and electron dose-constrained focusing limit local structural studies of zeolites in conventional transmission electron microscopy (TEM). We demonstrate that a multislice ptychography method based on four-dimensional scanning TEM (4D-STEM) data can overcome these limitations. Images obtained from a ~40-nanometer-thick MFI zeolite exhibited a lateral resolution of ~0.85 angstrom that enabled the identification of individual framework oxygen (O) atoms and the precise determination of the orientations of adsorbed molecules. Furthermore, a depth resolution of ~6.6 nanometers allowed probing of the three-dimensional distribution of O vacancies, as well as the phase boundaries in intergrown MFI and MEL zeolites. The 4D-STEM ptychography can be generally applied to other materials with similar high electron-beam sensitivity.

Molecular Influences on the Quantification of Lewis Acidity with Phosphine Oxide Probes

Gutmann-Beckett-type measurements with phosphine oxide probes can be used to estimate effective Lewis acidity with ³¹P nuclear magnetic resonance spectroscopy, but the influence of the molecular structure of a given probe on the quantification of Lewis acidity remains poorly documented in experimental work. Here, a quantitative comparison of triethyl (E), trioctyl (O), and triphenyl (P) phosphine oxides as molecular probes of Lewis acidity has been carried out via titration studies in MeCN with a test set of six mono- and divalent metal triflate salts. In comparison to E, the bulkier O displays a similar range of chemical shift values and binding affinities for the various test metal ions. Spectral linewidths and speciation properties vary for individual cation-to-probe ratios, however, confirming probe-specific properties that can impact the data quality. Importantly, P displays a consistently narrower dynamic range than both E and O, illustrating how electronic changes at phosphorus can influence the NMR response. Comparative parametrizations of the effective Lewis acidities of a broader range of metal ions, including the trivalent rare earth ions Y³⁺, Lu³⁺, and Sc³⁺ as well as the uranyl ion (UO₂²⁺), can be understood in light of these results, providing insight into the fundamental chemical processes underlying the useful approach of single-point measurements for quantification of effective Lewis acidity. Together with a study of counteranion effects reported here, these data clarify the diverse ensemble of factors that can influence the measurement of Lewis acid/base interactions.

Effects of surface acidity on the structure of organometallics supported on oxide surfaces

Well-defined organometallics supported on high surface area oxides are promising heterogeneous catalysts. An important design factor in these materials is how the metal interacts with the functionalities on an oxide support, commonly anionic X-type ligands derived from the reaction of an organometallic M-R with an -OH site on the oxide. The metal can either form a covalent M-O bond or form an electrostatic M⁺⋯^-O ion-pair, which impacts how well-defined organometallics will interact with substrates in catalytic reactions. A less common reaction pathway involves the reaction of a Lewis site on the oxide with the organometallic, resulting in abstraction to form an ion-pair, which is relevant to industrial olefin polymerization catalysts. This Feature Article views the spectrum of reactivity between an organometallic and an oxide through the prism of Brønsted and/or Lewis acidity of surface sites and draws analogies to the molecular frame where Lewis and Brønsted acids are known to form reactive ion-pairs. Applications of the well-defined sites developed in this article are also discussed.

Environmental Applications of Zeolites: Hydrophobic Sn-BEA as a Selective Gas Sensor for Exhaust Fumes

Environmental monitoring of pollutants, such as NOx and COx, which can be facilitated by a range of gas sensors, is of considerable fundamental and practical importance. This work has been focused on the synthesis and evaluation of zeolite β with tin (Sn-BEA) and dealuminated β (DeAl-BEA) zeolites. The zeolite samples have been extensively investigated by IR, UV-VIS and NMR spectroscopy, XRD, TGA, and N2 adsorption-desorption. The prepared Sn-BEA sample is characterised by the submicron particle size, an almost defect-free structure, and high hydrophobicity. Sensors containing selective microporous layers based on Sn-BEA and DeAl-BEA zeolites have been prepared and extensively tested. Both the Sn-BEA and DeAl-BEA zeolites have been deposited in thin films and evaluated as gas sensors for CO, CO2, NO, and NO2 in the presence of water vapour at room temperature. The Sn-BEA zeolite-based sensor showed high selectivity towards NO2, while the DeAl-BEA is selective towards CO2 and NO2.

H+ -H- Pairs in Partially Oxidized MAX Phases for Bifunctional Catalytic Conversion of Furfurals into Linear Ketones

Currently, less favorable C=O hydrogenation and weak concerted acid catalysis cause unsatisfactory catalytic performance in the upgrading of biomass-derived furfurals (i.e., furfural, 5-methyl furfural, and 5-hydroxymethyl furfural) to ketones (i.e., cyclopentanone, 2,5-hexanedione, and 1-hydroxyl-2,5-hexanedione). A series of partially oxidized MAX phase (i.e., Ti₃ AlC₂ , Ti₂ AlC, Ti₃ SiC₂ ) supporting Pd catalysts were fabricated, which showed high catalytic activity; Pd/Ti₃ AlC₂ in particular displayed high performance for conversion of furfurals into targeted ketones. Detailed studies of the catalytic mechanism confirm that in situ hydrogen spillover generates Frustrated Lewis H⁺ -H^- pairs, which not only act as the hydrogenation sites for selective C=O hydrogenation but also provide acid sites for ring opening. The close intimate hydrogenation and acid sites promote bifunctional catalytic reactions, substantially reducing the reported minimum reaction temperature of various furfurals by at least 30-60 °C.

Tailoring and Identifying Brønsted Acid Sites on Metal Oxo-Clusters of Metal-Organic Frameworks for Catalytic Transformation

Metal-organic frameworks (MOFs) with Brønsted acidity are an alternative solid acid catalyst for many important chemical and fuel processes. However, the nature of the Brønsted acidity on the MOF's metal cluster or center is underexplored. To design and optimize the acid strength and density in these MOFs, it is important to understand the origin of their acidity at the molecular level. In the present work, isoreticular MOFs, ZrNDI and HfNDI (NDI = N,N'-bis(5-isophthalate)naphthalenediimide), were prepared as a prototypical system to unravel and compare their Brønsted and Lewis acid sites through an array of spectroscopic, computational, and catalytic characterization techniques. With the aid of solid-state nuclear magnetic resonance and density functional calculations, Hf₆ oxo-clusters on HfNDI are quantitatively proved to possess a higher density Brønsted acid site, while ZrNDI-based MOFs display stronger and higher-population Lewis acidity. HfNDI-based MOFs exhibit a superior catalytic performance in activating dihydroxyacetone (DHA) and converting DHA to ethyl lactate, with 71.1% selectivity at 54.7% conversion after 6 h. The turnover frequency of BAS-dominated Hf-MOF in DHA conversion is over 50 times higher than that of ZSM-5, a strong BAS-based zeolite. It is worth noting that HfNDI is reported for the first time in the literature, which is an alternative platform catalyst for biorefining and green chemistry. The present study furthermore highlights the uniqueness of Hf-based MOFs in this important biomass-to-chemical transformation.

Structural and Acidic Characteristics of Multiple Zr Defect Sites in UiO-66 Metal-Organic Frameworks

Although defects are prevalent in metal-organic frameworks (MOFs) and usually play a crucial role in modulating their performance in various applications, detailed structural characterizations of various defects remain a challenging task mainly due to their disordered, heterogeneous, and local nature. In this work, by using solid-state nuclear magnetic resonance spectroscopy (SSNMR) techniques in conjunction with density functional theory (DFT) calculations, it is clearly elucidated that the trimethylphosphine (TMP)-assisted ³¹P NMR strategy is capable of greatly facilitating the qualitative and quantitative description of the detailed structural and acidic characteristics as well as the evolution process of various Zr defects with subtle distinctions in UiO-66 upon moderate thermal treatment, hence surpassing most conventional analytical techniques. These results offer a fundamental understanding of the defect chemistry in MOFs.

Novel Magnetically-Recoverable Solid Acid Catalysts with a Hydrophobic Layer in Protecting the Active Sites from Water Poisoning

Three novel magnetically-recoverable solid acid catalysts (hydrophobic catalysts Fe3O4@SiO2-Me&PrSO3H, Fe3O4@SiO2-Oc&PrSO3H and hydrophilic catalyst Fe3O4@SiO2-PrSO3H) were synthesized by introducing organic propylsulfonic acid and alkyl groups to Fe3O4@SiO2 nanocomposites. We characterized these catalysts by FT-IR, EDS, XRD, VSM and SEM, and found that they had excellent core-shell structure and magnetic responsiveness. We also explored the impact of surface hydrophobicity on activity and stability of catalysts in ethyl acetate (EAC) synthesis reaction. The results indicated that: for reactivity and reusability, Fe3O4@SiO2-Oc&PrSO3H > Fe3O4@SiO2-Me&PrSO3H > Fe3O4@SiO2-PrSO3H. This was because octyl and methyl groups could build a hydrophobic layer on the surfaces of Fe3O4@SiO2-Oc&PrSO3H and Fe3O4@SiO2-Me&PrSO3H, and this could effectively prevent water molecules from poisoning active sites; the hydrophobicity of octyl was stronger than methyl. Fe3O4@SiO2-Oc&PrSO3H also showed higher catalytic activity in the external aqueous reaction system, which indicated that it had good water toleration. Moreover, we could easily separate Fe3O4@SiO2-Oc&PrSO3H from the reaction mixture with an external magnetic field, in the meanwhile, its reactivity could still remain above 80% after reusing 6 times.

Molecular identification and quantification of defect sites in metal-organic frameworks with NMR probe molecules

The defects in metal-organic frameworks (MOFs) can dramatically alter their pore structure and chemical properties. However, it has been a great challenge to characterize the molecular structure of defects, especially when the defects are distributed irregularly in the lattice. In this work, we applied a characterization strategy based on solid-state nuclear magnetic resonance (NMR) to assess the chemistry of defects. This strategy takes advantage of the coordination-sensitive phosphorus probe molecules, e.g., trimethylphosphine (TMP) and trimethylphosphine oxide (TMPO), that can distinguish the subtle differences in the acidity of defects. A variety of local chemical environments have been identified in defective and ideal MOF lattices. The geometric dimension of defects can also be evaluated by using the homologs of probe molecules with different sizes. In addition, our method provides a reliable way to quantify the density of defect sites, which comes together with the molecular details of local pore environments. The comprehensive solid-state NMR strategy can be of great value for a better understanding of MOF structures and for guiding the design of MOFs with desired catalytic or adsorption properties.

Defects in porous materials can alter the pore structure and chemical properties. Here authors demonstrate an approach for studying defects in metal-organic frameworks using ³¹P NMR and probe molecules.

Probing the nature of Lewis acid sites on oxide surfaces with 31P(CH3)3 NMR: a theoretical analysis

The characterization of catalytic oxide surfaces is often done by studying the properties of adsorbed probe molecules. The ³¹P NMR chemical shift of adsorbed trimethylphosphine, P(CH₃)₃ or TMP, has been used to identify the presence of different facets in oxide nanocrystals and to study the acid-base properties of the adsorption sites. The NMR studies are often complemented by DFT calculations to provide additional information on TMP adsorption mode, bond strength, etc. So far, however, no systematic study has been undertaken in order to compare on the same footing the chemical shifts and the adsorption properties of TMP on different oxide surfaces. In this work we report the results of DFT+D (D = dispersion) calculations on the adsorption of TMP on the following oxide surfaces: anatase TiO₂(101) and (001), rutile TiO₂(110), tetragonal ZrO₂(101), stepped ZrO₂(134) and (145) surfaces, rutile SnO₂(110), (101) and (100), wurtzite ZnO(101̄0), and cubic CeO₂(111) and (110). Beside the stoichiometric surfaces, also reduced oxides have been considered creating O vacancies in various sites. TMP has been adsorbed on top of variously coordinated Lewis acid cation sites, with the aim to identify, also with the support of machine learning algorithms, trends or patterns that can help to correlate the ³¹P chemical shift with physico-chemical properties of the oxide surfaces such as adsorption energy, Bader charges, cation-P distance, work function, etc. Some simple correlation can be found within the same oxide between the ³¹P chemical shift and the adsorption energy, while when the full set of data is considered the only correlation found is with the net charge on the TMP molecule, a descriptor of the acid strength of the adsorption site.

Facet-Dependent Activity of CeO2 Nanozymes Regulate the Fate of Human Neural Progenitor Cell via Redox Homeostasis

Neural progenitor cells (NPCs) therapy, a promising therapeutic strategy for neurodegenerative diseases, has a huge challenge to ensure high survival rate and neuronal differentiation rate. Cerium oxide (CeO₂) nanoparticles exhibit multienzyme mimetic activities and have shown the capability of regulating reactive oxygen species (ROS), which is a pivotal mediator for intracellular redox homeostasis in NPCs, regulating biological processes including differentiation, proliferation, and apoptosis. In the present study, the role of facet-dependent CeO₂-mediated redox homeostasis in regulating self-renewal and differentiation of NPCs is reported for the first time. The cube-, rod-, and octahedron-shaped CeO₂ nanozymes with different facets are prepared. Among the mentioned nanozymes, the cube enclosed by the (100) facet exhibits the highest CAT-like activity, causing it to provide superior protection to NPCs from oxidative stress induced by H₂O₂; meanwhile, the octahedron enclosed by the (111) facet with the lowest CAT-like activity induces the most ROS production in ReNcell CX cells, which promotes neuronal differentiation by activated AKT/GSK-3β/β-catenin pathways. A further mechanistic study indicated that the electron density of the surface Ce atoms changed continuously with different crystal facets, which led to their different CAT-like activity and modulation of redox homeostasis in NPCs. Altogether, the different surface chemistry and atomic architecture of active sites on CeO₂ exert modulation of redox homeostasis and the fate of NPCs.

High-fidelity control of spin ensemble dynamics via artificial intelligence: from quantum computing to NMR spectroscopy and imaging

High-fidelity control of spin ensemble dynamics is essential for many research areas, spanning from quantum computing and radio-frequency (RF) engineering to NMR spectroscopy and imaging. However, attaining robust and high-fidelity spin operations remains an unmet challenge. Using an evolutionary algorithm and artificial intelligence (AI), we designed new RF pulses with customizable spatial or temporal field inhomogeneity compensation. Compared with the standard RF shapes, the new AI-generated pulses show superior performance for bandwidth, robustness, and tolerance to field imperfections. As a benchmark, we constructed a spin entanglement operator for the weakly coupled two-spin-1/2 system of ¹³CHCl₃, achieving high-fidelity transformations under multiple inhomogeneity sources. We then generated band-selective and ultra-broadband RF pulses typical of biomolecular NMR spectroscopy. When implemented in multipulse NMR experiments, the AI-generated pulses significantly increased the sensitivity of medium-size and large protein spectra relative to standard pulse sequences. Finally, we applied the new pulses to typical imaging experiments, showing a remarkable tolerance to changes in the RF field. These AI-generated RF pulses can be directly implemented in quantum information, NMR spectroscopy of biomolecules, magnetic resonance imaging techniques for in vivo and materials sciences.

The Distance between Minima of Electron Density and Electrostatic Potential as a Measure of Halogen Bond Strength

In this study, we present results of a detailed topological analysis of electron density (ED) of 145 halogen-bonded complexes formed by various fluorine-, chlorine-, bromine-, and iodine-containing compounds with trimethylphosphine oxide, Me3PO. To characterize the halogen bond (XB) strength, we used the complexation enthalpy, the interatomic distance between oxygen and halogen, as well as the typical set of electron density properties at the bond critical points calculated at B3LYP/jorge-ATZP level of theory. We show for the first time that it is possible to predict the XB strength based on the distance between the minima of ED and molecular electrostatic potential (ESP) along the XB path. The gap between ED and ESP minima exponentially depends on local electronic kinetic energy density at the bond critical point and tends to be a common limiting value for the strongest halogen bond.

New insights into the interaction of triethylphosphine oxide with silica surface: exchange between different surface species

Although chemical shift values of triethylphosphine oxide (TEPO) adsorbed on acidic solids have been considered as an indication of acid strength, in this work we demonstrate that the chemical shift depends also on the adsorbed amount of TEPO. On silica, the presence of three different adsorbed species, physisorbed on non-acidic surface, chemisorbed through a single H bond and chemisorbed through two H bonds, can be detected by the correlation of the ³¹P chemical shift with the TEPO adsorbed amount. TEPO chemical exchange between the different sites is demonstrated by the single NMR signal obtained in all the cases, and also by the variation of the line width, which is broader at low surface coverage due to the slower chemical exchange because of the longer average distance between surface sites.

Thermal Alteration in Adsorption Sites over SAPO‐34 Zeolite

Zeolites have found tremendous applications in the chemical industry. However, the dynamic nature of their active sites under the flow of adsorbate molecules for adsorption and catalysis is unclear, especially in operando conditions, which could be different from the as‐synthesized structures. In the present study, we report a structural transformation of the adsorptive active sites in SAPO‐34 zeolite by using acetone as a probe molecule under various temperatures. The combination of solid‐state nuclear magnetic resonance, in situ variable‐temperature synchrotron X‐ray diffraction, and in situ diffuse‐reflectance infrared Fourier‐transform spectroscopy allow a clear identification and quantification that the chemisorption of acetone can convert the classical Brønsted acid site adsorption mode to an induced Frustrated Lewis Pairs adsorption mode at increasing temperatures. Such facile conversion is also supported by the calculations of ab‐initio molecular‐dynamics simulations. This work sheds new light on the importance of the dynamic structural alteration of active sites in zeolites with adsorbates at elevated temperatures.

The coordination chemistry of oxide and nanocarbon materials

Understanding how a ligand affects the steric and electronic properties of a metal is the cornerstone of the inorganic chemistry enterprise. What happens when the ligand is an extended surface? This question is central to the design and implementation of state-of-the-art functional materials containing transition metals. This perspective will describe how these two very different sets of extended surfaces can form well-defined coordination complexes with metals. In the Green formalism, functionalities on oxide surfaces react with inorganics to form species that contain X-type or LX-type interactions between the metal and the oxide. Carbon surfaces are neutral L-type ligands; this perspective focuses on carbons that donate six electrons to a metal. The nature of this interaction depends on the curvature, and thereby orbital overlap, between the metal and the extended π-system from the nanocarbon.

Quantitatively Mapping the Distribution of Intrinsic Acid Sites in Mordenite Zeolite by High-Field 23Na Solid-State Nuclear Magnetic Resonance

It is of great significance to accurately quantify the Brønsted acid sites (BASs) at different positions of mordenite (MOR) zeolite. However, H-MOR obtained from Na-MOR can hardly avoid dealumination under hydrothermal conditions, which causes difficulty in the acid characterization. Herein, 23Na-27Al D-HMQC was performed combined with high-field 23Na MQ MAS NMR and DFT calculation, which provided an unambiguous attribution of the 23Na chemical shifts and further helped to improve the resolution of 27Al MAS NMR. By fitting the 23Na and 1H MAS NMR spectra of Na/H-MOR, the intrinsic BAS contents in different T-sites were measured by characterizing the location and content of sodium ions. These Na/H-MOR zeolites with various acid distributions were used for DME carbonylation and showed that the amount of BASs in the T3 site was proportional to the activity of carbonylation. This study provides a new method for investigating the intrinsic acid properties of zeolites.

Evaluation of Zeolite Acidity by 31P MAS NMR Spectroscopy of Adsorbed Phosphine Oxides: Quantitative or Not?

³¹P magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy of adsorbed alkyl-substituted phosphine oxides has witnessed tremendous progress during the last years and has become one of the most informative and sensitive methods of zeolite acidity investigation. However, quantitative evaluation of the number of sites is still a challenge. This study clarifies the main origin of errors occurring during NMR experiments, introduces the appropriate standards (both internal and external), and determines the relaxation parameters and the conditions for the acquisition and integration of spectra. As a result, a methodology for the quantitative measurement of the content of Brønsted and Lewis sites and the amount of internal and external silanol groups is established. The application of probe molecules of different sizes (namely, trimethylphosphine oxide (TMPO), tri-n-butylphosphine oxide (TBPO), and tri-n-octylphosphine oxide (TOPO)) is shown to be a good tool for distinguishing between the active sites inside the zeolite pores, mesopores, and on the outer crystal surface. The methodology proposed is verified on BEA zeolites different in composition, texture, and morphology.

Molecular design and experimental study of cellulose conversion to 5-hydroxymethylfurfural catalyzed by different ratios of Brønsted/Lewis acid ionic liquids

Cellulose conversion into 5-hydroxymethylfurfural (5-HMF) is difficult because of the strong hydrogen bonding existed in cellulose chains. Brønsted/Lewis (B/L) biacidic functionalized ionic liquids (ILs) have great advantages in acid-catalyzed tandem reactions, but the catalytic effect of ILs differs considerably depending on B/L acid ratios. Therefore, this work designed a series of reactions with different proportions of biacidic ILs for the preparation of 5-HMF from cellulose. The tandem reaction is often performed in the presence of a solvent, and the activity of the catalyst is also affected by the solvent. Therefore, in this work, the solvation model density(SMD) model was introduced into the quantum chemical calculation method for molecular design to predict the catalytic effect and explore the catalytic mechanism. The calculation results and experiments jointly showed that [(HSO₃-P)₂im]Cl·ZnCl₂ had the highest efficiency, with a 5-HMF yield of 65.66%. This study facilitates the directional optimization design of the catalyst.

Phosphine oxides as NMR and IR spectroscopic probes for geometry and energy of PO···H–A hydrogen bonds

In this work we evaluate the possibility to use the NMR and IR spectral properties of P=O group to estimate the geometry and strength of hydrogen bonds which it forms...

Chemoselective nitrilation of dimethyl adipate with ammonia over carbon encapsulated WOx catalysts under continuous flow conditions

Adiponitrile (ADN) is a key intermediate for the industrial production of polyamide represented by nylon 66.

The challenge of silanol species characterization in zeolites

The chemistry of silica-based materials, including zeolites, is strongly influenced by the nature and amount of their silanols. In zeolites, they are either isolated (non H-bonded) silanol species, or silanol...

Acidity Scales of Deep Eutectic Solvents based on IR and NMR

Acidic deep eutectic solvents (ADESs) have been utilized in various applications. Clearly, it is crucial to obtain acidity information that could reveal the relationship with performance. However, appropriate methods of...

Determination of acid structures on the surface of sulfated monoclinic and tetragonal zirconia through experimental and theoretical approaches

The acid structures on both tetragonal and monoclinic sulfated zirconia were studied and successfully proposed through experimental and theoretical approaches.

Anchoring Boron Atom to the Specific Tetrahedral Sites of Borosilicate MFI by Imidazolium-based Molecules

Regulating heteroatom substituted tetrahedral sites (T sites) within a zeolite crystal significantly influences the zeolite properties. Herein, the as-synthesized MFI zeolite with tailored boron location at various T sites is...

Hydrogen-Catalyzed Acid Transformation for the Hydration of Alkenes and Epoxy Alkanes over Co-N Frustrated Lewis Pair Surfaces

Hydrogen (H₂) is widely used as a reductant for many hydrogenation reactions; however, it has not been recognized as a catalyst for the acid transformation of active sites on solid surface. Here, we report the H₂-promoted hydration of alkenes (such as styrenes and cyclic alkenes) and epoxy alkanes over single-atom Co-dispersed nitrogen-doped carbon (Co-NC) via a transformation mechanism of acid-base sites. Specifically, the specific catalytic activity and selectivity of Co-NC are superior to those of classical solid acids (acidic zeolites and resins) per micromole of acid, whereas the hydration catalysis does not take place under a nitrogen atmosphere. Detailed investigations indicate that H₂ can be heterolyzed on the Co-N bond to form H^δ--Co-N-H^δ+ and then be converted into OH^δ--Co-N-H^δ+ accompanied by H₂ generation via a H₂O-mediated path, which significantly reduces the activation energy for hydration reactions. This work not only provides a novel catalytic method for hydration reactions but also removes the conceptual barriers between hydrogenation and acid catalysis.

What Distinguishes the Strength and the Effect of a Lewis Acid: Analysis of the Gutmann-Beckett Method

IUPAC defines Lewis acidity as the thermodynamic tendency for Lewis pair formation. This strength property was recently specified as global Lewis acidity (gLA), and is gauged for example by the fluoride ion affinity. Experimentally, Lewis acidity is usually evaluated by the effect on a bound molecule, such as the induced ³¹ P NMR shift of triethylphosphine oxide in the Gutmann-Beckett (GB) method. This type of scaling was called effective Lewis acidity (eLA). Unfortunately, gLA and eLA often correlate poorly, but a reason for this is unknown. Hence, the strength and the effect of a Lewis acid are two distinct properties, but they are often granted interchangeably. The present work analyzes thermodynamic, NMR specific, and London dispersion effects on GB numbers for 130 Lewis acids by theory and experiment. The deformation energy of a Lewis acid is identified as the prime cause for the critical deviation between gLA and eLA but its correction allows a unification for the first time.