Ligand-Promoted Palladium-Catalyzed Aerobic Oxidation Reactions

Intramolecular Csp3-H Activation at a Platinum(IV) Center Resulting from O2 Activation: The Role of a Proton-Responsive Ligand and Trans Influence

Aerobic oxidation of a dimethylplatinum(II) complex featuring 1,1-di(2-pyridyl)ethanol as a supporting ligand leads to the formation of two unexpected PtIV complexes (in ∼1:1 ratio), neither of which results from direct oxidation typical for PtII centers supported by popular κ2-(N,N) ligands. While one product features an isomerized PtIV center stabilized by the κ3-(N,N,O) ligand coordination mode, surprisingly, the other product results from intramolecular activation of the ligand methyl fragment. Mechanistic studies, reactivity of model complexes, and DFT calculations reveal that the critical proton-responsive nature of the ligand allows formation of intermediates that result in a concerted metalation deprotonation (CMD)-like C-H activation at PtIV. To the best of our knowledge, this is the first mechanistic delineation of Csp3-H activation at PtIV, despite being known for other high-valent platinum group metal centers.

Robust phosphine-based covalent-organic framework palladium catalysts for the highly efficient carbonylation coupling reaction

The first vinyl-linked PPh3-based covalent-organic frameworks (Pd@TMBen-PPh3 and Pd@TMBen-4F-PPh3) were facilely constructed via direct three-component Knoevenagel condensation, which could serve as outstanding heterogeneous catalysts for the Pd-catalyzed carbonylation coupling reaction owing to the synergistic effect of the flexible PPh3-ligated Pd complexes and the rigid framework.

Access to Diverse Carbonyl Compounds by Catalyst-Free and Photoinduced Aerobic Cleavage of C=N Bonds

Functional group interconversion is of great significance in organic synthesis. However, aerobic cleavage of C=N bonds to access carbonyl compounds still suffered from some limitations such as harsh reaction conditions, stoichiometric oxidants, poor substrate scope and use of toxic reagents. Herein, we report a catalyst-free and photo-induced aerobic cleavage of C=N bonds to afford diverse carbonyl compounds using oxygen from air as green oxidant. This mild methodology permits N-tosylhydrazones converted into the corresponding carbonyl compounds including ketones, aldehydes and carboxylic acids, showing broad functional group tolerance and compatibility. Moreover, the gram-scale reaction and post-modification of complicated molecules proved the applicability and efficiency of this strategy. Finally, a plausible mechanism was proposed based on spectroscopic investigations and detailed mechanistic studies.

Recent advances in the synthesis of N-heterocycles from α-amino acids mediated by iodine

The synthesis of N-heterocycles has received extensive attention from scientists considering their important role in organic synthesis, pharmaceuticals, and materials chemistry. α-Amino acids (α-AAs), both natural and non-natural, are structurally diverse, containing basic amino groups, acidic carboxyl groups, and various side-chain R groups in a single molecule. Given their structural properties and wide range of sources, they have undoubtedly become suitable synthetic building blocks for organic synthesis. However, conventional transformations of amino acids (AAs) focus on the amino and carboxyl groups independently. Conversions for these two prominent functional groups generally do not affect both their alpha positions and their branched chains. Over the past decade, with the application of iodine (I2) in the field of heterocyclic synthesis, the use of α-AAs for diverse construction of complex N-heterocyclic structures has gained increasing attention. This synthetic strategy relies on the I2-mediated Strecker degradation, which introduces α-AAs as electrophilic carbon species into the domino reaction sequence via decarboxylation and deamination processes. In this review, we have summarized recent advances in this emerging area.

Selective Oxyfunctionalization of Benzylic C-H with No Solvent

The direct selective oxyfunctionalization of C-H into C═O represents a highly useful, yet challenging, synthetic methodology. Herein, a one-step oxyfunctionalization of benzylic C-H into aryl ketone, with no overoxidation of the -OH functional group, is reported through mechanochemistry. The substrate scope is also tolerant of a wide range of different functional groups, providing a particularly sustainable yet widely adaptable route for the synthesis of aryl ketones, which represent both a classic synthetic precursor and a useful strategy for lignin monomer valorization. A series of mechanistic and spectroscopic investigations were also conducted to shed light on the unique C-H over -OH selectivity, opening up new avenues for oxidation chemistry.

La1-xSrxFeO3-δ Perovskite Oxide Nanoparticles for Low-Temperature Aerobic Oxidation of Isobutane to tert-Butyl Alcohol

The development of reusable solid catalysts based on naturally abundant metal elements for the liquid-phase selective oxidation of light alkanes under mild conditions to obtain desired oxygenated products, such as alcohols and carbonyl compounds, remains a challenge. In this study, various perovskite oxide nanoparticles were synthesized by a sol-gel method using aspartic acid, and the effects of A- and B-site metal cations on the liquid-phase oxidation of isobutane to tert-butyl alcohol with molecular oxygen as the sole oxidant were investigated. Iron-based perovskite oxides containing Fe4+ such as BaFeO3-δ, SrFeO3-δ, and La1-xSrxFeO3-δ exhibited catalytic performance superior to those of other Fe3+- and Fe2+-based iron oxides and Mn-, Ni-, and Co-based perovskite oxides. The partial substitution of Sr for La in LaFeO3 significantly enhanced the catalytic performance and durability. In particular, the La0.8Sr0.2FeO3-δ catalyst could be recovered by simple filtration and reused several times without an obvious loss of its high catalytic performance, whereas the recovered BaFeO3-δ and SrFeO3-δ catalysts were almost inactive. La0.8Sr0.2FeO3-δ promoted the selective oxidation of isobutane even under mild conditions (60 °C), and the catalytic activity was comparable to that of homogeneous systems, including halogenated metalloporphyrin complexes. On the basis of mechanistic studies, including the effect of Sr substitution in La1-xSrxFeO3-δ on surface redox reactions, the present oxidation proceeds via a radical-mediated oxidation mechanism, and the surface-mixed Fe3+/Fe4+ valence states of La1-xSrxFeO3-δ nanoparticles likely play an important role in promoting C-H activation of isobutane as well as decomposition of tert-butyl hydroperoxide.

NHPI-Catalyzed Electro-Oxidation of Alcohols to Aldehydes and Ketones

A practical and recyclable electro-oxidation of alcohols to aldehydes and ketones by using N-hydroxyphthalimide (NHPI) as the catalyst is presented. Through an undivided pool, under constant current conditions, various alcohols can be oxidized to the corresponding aldehydes or ketones in a high yield. Compared with previous methods, this system has the following characteristics: (1) the catalyst, electrode, electrolyte, and solvent (mainly water) are recyclable; (2) it has many advantages such as mild reaction conditions, easy operation, and good tolerance of functional groups; and (3) it can be smoothly scaled up to kilogram-scale production.

Palladium-Catalyzed Acetoxylation of γ-Dehydro-aryl-himachalene: The Synthesis of a Novel Allylic Acetoxylated Sesquiterpene and a π-Allyl Palladium(II) Complex

Allylic oxygenated derivatives of himachalenes are highly valued molecules due to their potential applications in perfumery, cosmetics, and pharmaceuticals. Previous attempts at catalyzed allylic oxidation of himachalenes led to the formation of a very stable η3-allyl palladium complex, preventing any further reaction development. Herein, we present the first successful palladium-catalyzed synthesis of a novel allylic acetoxylated derivative of himachalenes. This reaction was achieved by incorporating an aromatic ring into the substrate structure. The resulting intermediate complex was isolated and characterized using nuclear magnetic resonance spectroscopy and X-ray crystallography. Density functional theory (DFT) calculations were performed to compare the reactivity of the newly synthesized complex with previously reported ones. The theoretical results confirm that the introduction of an aromatic ring enhances the reactivity of the η³-allyl palladium complex, thereby facilitating the desired transformation.

The Adaptative Modulation of the Phosphinito-Phosphinous Acid Ligand: Computational Illustration Through Palladium-Catalyzed Alcohol Oxidation

The phosphinito-phosphinous acid ligand (PAP) is a singular bidentate-like self-assembled ligand exhibiting dissymmetric but interchangeable electronic properties. This unusual structure has been used for the generation of active palladium hydride through alcohol oxidation. In this paper, we report the first theoretical highlight of the adaptative modulation ability of this ligand within a direct H-abstraction path for Pd and Pt catalyzed alcohol oxidation. A reaction forces study revealed rearrangements in the ligand self-assembling system triggered by a simple proton shift to promote the metal hydride generation via concerted six-center mechanism. We unveil here the peculiar behavior of the phosphinito-phosphinous acid ligand in this catalysis.

Direct oxygen insertion into C-C bond of styrenes with air

Skeletal editing of single-atom insertion to basic chemicals has been demonstrated as an efficient strategy for the discovery of structurally diversified compounds. Previous endeavors in skeletal editing have successfully facilitated the insertion of boron, nitrogen, and carbon atoms. Given the prevalence of oxygen atoms in biologically active molecules, the direct oxygenation of C-C bonds through single-oxygen-atom insertion like Baeyer-Villiger reaction is of particular significance. Herein, we present an approach for the skeletal modification of styrenes using O2 via oxygen insertion, resulting in the formation of aryl ether frameworks under mild reaction conditions. The broad functional-group tolerance and the excellent chemo- and regioselectivity are demonstrated in this protocol. A preliminary mechanistic study indicates the potential involvement of 1,2-aryl radical migration in this reaction.

Leveraging ligand-based proton and electron transfer for aerobic reactivity and catalysis

While O2 is an abundant, benign, and thermodynamically potent oxidant, it is also kinetically inert. This frequently limits its use in synthetic transformations. Correspondingly, direct aerobic reactivity with O2 often requires comparatively harsh or forcing conditions to overcome this kinetic barrier. Forcing conditions limit product selectivity and can lead to over oxidation. Alternatively, O2 can be activated by a catalyst to facilitate oxidative reactivity, and there are a variety of sophisticated examples where transition metal catalysts facilitate aerobic reactivity. Many efforts have focused on using metal-ligand cooperativity to facilitate the movement of protons and electrons for O2 activation. This approach is inspired by enzyme active sites, which frequently use the secondary sphere to facilitate both the activation of O2 and the oxidation of substrates. However, there has only recently been a focus on harnessing metal-ligand cooperativity for aerobic reactivity and, especially, catalysis. This perspective will discuss recent efforts to channel metal-ligand cooperativity for the activation of O2, the generation and stabilization of reactive metal-oxygen intermediates, and oxidative reactivity and catalysis. While significant progress has been made in this area, there are still challenges to overcome and opportunities for the development of efficient catalysts which leverage this biomimetic strategy.

Palladium-catalyzed cross-coupling of alcohols with olefins by positional tuning of a counteranion

Transition metal-catalyzed cross-couplings have great potential to furnish complex ethers; however, challenges in the C(sp3)-O functionalization step have precluded general methods. Here, we describe computationally guided transition metal-ligand design that positions a hydrogen-bond acceptor anion at the reactive site to promote functionalization. A general cross-coupling of primary, secondary, and tertiary aliphatic alcohols with terminal olefins to furnish >130 ethers is achieved. The mild conditions tolerate functionality that is prone to substitution, elimination, and epimerization and achieve site selectivity in polyol settings. Mechanistic studies support the hypothesis that the ligand's geometry and electronics direct positioning of the phosphate anion at the π-allyl-palladium terminus, facilitating the phosphate's hydrogen-bond acceptor role toward the alcohol. Ligand-directed counteranion positioning in cationic transition metal catalysis has the potential to be a general strategy for promoting challenging bimolecular reactivity.

Exploring Catalytic Intermediates in Pd-Catalyzed Aerobic Oxidative Amination of 1,3-Dienes: Multiple Metal Interactions of the Palladium Nanoclusters

Metal nanoclusters (NCs) have unique properties because of their small size, which makes them useful as catalysts in reactions like cross-coupling. Pd-catalyzed oxidative amination, which involves dehydrogenative C-N bond formation, uses Pd complexes as the active species. It is known that the catalytic conditions involve the formation of Pd(0) species from Pd NCs, but the precise role of Pd NCs in the transformations has not been established. In this study, we investigated the characteristic properties of Pd NCs in oxidative amination of 1,3-dienes. The reaction achieved direct amination of commercially accessible 1,3-dienes with secondary aromatic amines, providing a variety of nitrogen containing 1,3-dienes. The compound was applicable to radical polymerization to provide the nitrogen-fabricated 1,3-diene-based polymer, which exhibited a different thermal stability compared to aliphatic nitrogen-fabricated diene polymers. In addition to the synthetic utility, by combining X-ray absorption fine structure and small-angle X-ray scattering analysis, we revealed amines and 1,3-dienes affected metal leaching from the Pd nanoparticles and stabilization of Pd NCs in the catalytic reaction. Additionally, DFT calculation suggested that the catalytic intermediate contained multiple adjacent Pd atoms and was responsible for formation of an σ-allylic intermediate that is difficult to form with the use of Pd complexes. These results could be used to understand the underlying phenomenon in the oxidative coupling reaction and develop Pd NCs-based dehydrogenation.

Cascade Oxypalladation/1,3-Palladium Shift to Access Cyclopentene-Fused Isocoumarins

Fused isocoumarins are frequently found in several natural products and pharmaceuticals. Herein, a cascade annulation of 2-alkynylbenzoate-tethered cyclic 1,3-diones via sequential trans-oxypalladation, carbonyl insertion, 1,3-Pd shift, and β-hydride elimination is reported. This method provides efficient access to highly diastereoselective tetracyclic cyclopentene-fused isocoumarins containing two contiguous quaternary stereocenters. A plausible reaction mechanism is proposed on the basis of mechanistic studies, including deuterium labeling experiments. Studies toward enantioselective synthesis using a chiral Bpy ligand gave encouraging initial results.

Mechanistic insights into facilitating reductive elimination from Ni(II) species

Reductive elimination is a key step in Ni-catalysed cross-couplings, which is often considered to result in new covalent bonds. Due to the weak oxidizing ability of Ni(II) species, reductive eliminations from Ni(II) centers are challenging. A thorough mechanistic understanding of this process could inspire the rational design of Ni-catalysed coupling reactions. In this article, we give an overview of recent advances in the mechanistic study of reductive elimination from Ni(II) species achieved by our group. Three possible models for reductive elimination from Ni(II) species were investigated and discussed, including direct reductive elimination, electron density-controlled reductive elimination, and oxidation-induced reductive elimination. Notably, the direct reductive elimination from Ni(II) species often requires a high activation energy in some cases. In contrast, the electron density-controlled and oxidation-induced reductive elimination pathways can significantly enhance the driving force for reductive elimination, accelerating the formation of new covalent bonds. The intricate reaction mechanisms for each of these pathways are thoroughly discussed and systematically summarized in this paper. These computational studies showcase the characteristics of three models for reductive elimination from Ni(II) species, and we hope that it will spur the development of mechanistic studies of cross-coupling reactions.

Expedient, regioselective C-H chalcogenation of 3,4-dihydro-1,4-benzoxazines using a palladium-copper catalyst

The palladium-catalysed regioselective C-H chalcogenation of benzoxazines with disulfides and diselenides in air has been described. In this protocol, palladium acetate serves as the catalyst in conjunction with copper as an oxidizing agent. Through this approach, a wide array of sulfenylation and selenylation reactions of benzomorpholines have been effected, yielding results ranging from good to excellent. Thus, the established procedure demonstrates superb regioselectivity and a strong tolerance towards various functional groups and is suitable for gram-scale synthesis. Additionally, this synthetic approach offers a practical and convenient pathway for late-stage functionalization leading to the Rosenmund-von Braun reaction.

General Regio- and Diastereoselective Allylic C-H Oxygenation of Internal Alkenes

Branched allylic esters and carboxylates are fundamental motifs prevalent in natural products and drug molecules. The direct allylic C-H oxygenation of internal alkenes represents one of the most straightforward approaches, bypassing the requirement for an allylic leaving group as in the classical Tsuji-Trost reaction. However, current methods suffer from limited scope─often accompanied by selectivity issues─thus hampering further development. Herein we report a photocatalytic platform as a general solution to these problems, enabling the coupling of diverse internal alkenes with carboxylic acids, alcohols, and other O-nucleophiles, typically in a highly regio- and diastereoselective manner.

An N-heterocyclic carbene-based pincer system of palladium and its versatile reactivity under oxidizing conditions

NHC-based pincers (NHC = N-heterocyclic carbene) have been broadly employed as supporting platforms, and their palladium complexes have found many synthetic applications. However, previous studies mainly focused on the NHC pincers of palladium featuring an oxidation number of +II. In contrast, oxidation of these well-defined Pd(II) species and the study of their fundamental high-valent Pd chemistry remain largely undeveloped. In addition, from a perspective of PdII/PdIV catalysis, the reactivity and degradation of NHC pincers in catalytically relevant reactions have not been well understood. In this work, a series of Pd(II) complexes supported by a well-known NHC^Aryl^NHC pincer platform have been prepared. Their reactivity towards various oxidizing reagents, including halogen surrogates, electrophilic fluorine reagents, and alkyl/aryl halides, has been examined. In some cases, ambient-characterizable high-valent Pd NHCs, which have been scarcely reported, were obtained. The carbenes incorporated into the pincer framework proved to be effective spectator donors. In contrast, the central aryl moiety exhibits versatile reactivity and collapse pathways, allowing it to function either as a spectator or a non-innocent actor.

Chiral Bisphosphine-Catalyzed Asymmetric Staudinger/aza-Wittig Reaction: An Enantioselective Desymmetrizing Approach to Crinine-Type Amaryllidaceae Alkaloids

An unprecedented chiral bisphosphine-catalyzed asymmetric Staudinger/aza-Wittig reaction of 2,2-disubstituted cyclohexane-1,3-diones is reported, enabling the facile access of a broad range of cis-3a-arylhydroindoles in high yields with excellent enantioselectivities. The key to the success of this work relies on the first application of chiral bisphosphine DuanPhos to the asymmetric Staudinger/aza-Wittig reaction. An effective reductive system has been established to address the challenging PV═O/PIII redox cycle associated with the chiral bisphosphine catalyst. In addition, comprehensive experimental and computational investigations were carried out to elucidate the mechanism of the asymmetric reaction. Leveraging the newly developed chemistry, the enantioselective total syntheses of several crinine-type Amaryllidaceae alkaloids, including (+)-powelline, (+)-buphanamine, (+)-vittatine, and (+)-crinane, have been accomplished with remarkable conciseness and efficiency.

Manganese-Catalyzed 5-Endo-trig Oxygenative Cyclization of α,β-Unsaturated Oximes under Air and Ambient Conditions for the Synthesis of 4,5-Dihydroisoxazoles

The stereoselective 5-endo-trig oxygenative cyclization of α,β-unsaturated oximes was achieved using molecular oxygen (O2) and a manganese catalyst. Several 4-hydroxy-4,5-dihydroisoxazoles were obtained in high yields by directly incorporating O2 from the atmosphere (eliminating the necessity for a pure oxygen environment) and using an unprecedentedly low loading of Mn(acac)3 (as little as 0.020 mol %) without additional additives. Because of its desirable features, such as operational simplicity, inexpensive catalyst, mild reaction conditions (open flask conditions at room temperature), and broad substrate compatibility, this novel reaction provides an attractive synthetic approach to producing 4-hydroxy-4,5-dihydroisoxazoles.

Tandem catalysis enables chlorine-containing waste as chlorination reagents

Chlorinated compounds are ubiquitous. However, accumulation of chlorine-containing waste has a negative impact on human health and the environment due to the inapplicability of common disposal methods, such as landfill and incineration. Here we report a sustainable approach to valorize chlorine-containing hydrocarbon waste, including solids (chlorinated polymers) and liquids (chlorinated solvents), based on copper and palladium catalysts with a NaNO3 promoter. In the process, waste is oxidized to release the chlorine in the presence of N-directing arenes to afford valuable aryl chlorides, such as the FDA-approved drug vismodegib. The remaining hydrocarbon component is mineralized to afford CO, CO2 and H2O. Moreover, the CO and CO2 generated could be further utilized directly. Thus, chlorine-containing hydrocarbon waste, including mixed waste, can serve as chlorination reagents that neither generate hazardous by-products nor involve specialty chlorination reagents. This tandem catalytic approach represents a promising method for the viable management of a wide and diverse range of chlorine-containing hydrocarbon wastes.

Tandem Reactions of Electrophilic Indoles toward Indolizines and Their Subsequent Transformations through Pd(II)-Mediated C-H Functionalization to Access Polyring-Fused N-Heterocycles

A simple and efficient synthetic approach for generating a library of structurally novel indolizines has been developed via sequential 1,3-dipolar cycloaddition-ring opening processes. Using this methodology, a series of indolizines bearing different substituents were made in moderate to good yields. The presence of two functionalizable C-H bonds in these indolizine motifs makes them attractive for accessing fused indolizine scaffolds. In this line, we have introduced palladium-mediated site-selective C-H functionalizations, where the N-center and the two C-H centers of the indolizine moiety can be readily functionalized to generate fused N-heterocycles. Utilizing a Pd-mediated dual C-H activation of 5-benzoyl-substituted indolizine afforded 6H-indeno-indolizine, and a tetracene, viz., indolizino[2,1-b]indoles, was produced in the same substrate by the Pd-catalyzed selective C-H amination in the presence of oxygen.

Copper-catalyzed intramolecular dearomative aza-Wacker reaction of indole

Herein, we describe a copper-catalyzed intramolecular dearomative amination of indoles via a formal aza-Wacker reaction. This protocol provides an efficient method to access aza-polycyclic indoline molecules bearing exocyclic CC bonds in moderate to excellent yields in the presence of molecular oxygen as an oxidant. It is worth noting that indolin-3-ones are achieved when employing C3-non-substituted indoles as substrates.

Electrochemical hydrogenation and oxidation of organic species involving water

Fossil fuel-driven thermochemical hydrogenation and oxidation using high-pressure H2 and O2 are still popular but energy-intensive CO2-emitting processes. At present, developing renewable energy-powered electrochemical technologies, especially those using clean, safe and easy-to-handle reducing agents and oxidants for organic hydrogenation and oxidation reactions, is urgently needed. Water is an ideal carrier of hydrogen and oxygen. Electrochemistry provides a powerful route to drive water splitting under ambient conditions. Thus, electrochemical hydrogenation and oxidation transformations involving water as the hydrogen source and oxidant, respectively, have been developed to be mild and efficient tools to synthesize organic hydrogenated and oxidized products. In this Review, we highlight the advances in water-participating electrochemical hydrogenation and oxidation reactions of representative organic molecules. Typical electrode materials, performance metrics and key characterization techniques are firstly introduced. General electrocatalyst design principles and controlling the microenvironment for promoting hydrogenation and oxygenation reactions involving water are summarized. Furthermore, paired hydrogenation and oxidation reactions are briefly introduced before finally discussing the challenges and future opportunities of this research field.

{Ru(C6 H6 )}-Decorating Heteropolymolybdate for Highly Activity Photocatalytic Oxidation of Benzyl Alcohol to Benzaldehyde

An unclassical structure of {Ru(C6 H6 )}-based polyoxometalate, Cs6 H4 [Te2 Mo12 O46 {Ru(C6 H6 )}] ⋅ 16.5H2 O (1), has been successfully constructed from {Te2 Mo12 O46 }-type heteropolymolybdate and {Ru(C6 H6 )} group, which structure type was discovered for the first time. Compound 1 not only possesses strong light-harvesting ability, but also exhibits high carrier separation efficiency and lower charge transfer resistance. Under visible light irradiation, compound 1 displayed excellent catalytic activity and circularity in the conversion of benzyl alcohol to benzaldehyde (yield=94 %; turnover number=500; turnover frequency=20.8 h-1 ). Finally, the electron paramagnetic resonance measurement and energy level matching analysis provide theoretical basis for the derivation of the reaction mechanism.

Fun With Unusual Functional Groups: Sulfamates, Phosphoramidates, and Di-tert-butyl Silanols

Compared to ubiquitous functional groups such as alcohols, carboxylic acids, amines, and amides, which serve as central "actors" in most organic reactions, sulfamates, phosphoramidates, and di-tert-butyl silanols have historically been viewed as "extras". Largely considered functional group curiosities rather than launch-points of vital reactivity, the chemistry of these moieties is under-developed. Our research program has uncovered new facets of reactivity of each of these functional groups, and we are optimistic that the chemistry of these fascinating molecules can be developed into truly general transformations, useful for chemists across multiple disciplines. In the ensuing sections, I will describe our efforts to develop new reactions with these "unusual" functional groups, namely sulfamates, phosphoramidates, and di-tert-butyl silanols.

Synthesis of 2,3-Benzotropones via Palladium(II)-Catalyzed Aerobic Dehydrogenation from 1-Benzosuberones and Sequential Diels-Alder Reaction to Yield Benzobicyclo[3.2.2]nonenones

An approach to 2,3-benzotropone from 1-benzosuberone via palladium(II)-catalyzed aerobic dehydrogenation was developed. This method first provided a catalytic route to various 2,3-benzotropones from their corresponding 1-benzosuberones in good yields. In addition, the reaction could be applied to a one-pot Diels-Alder reaction with maleimide, providing a complex benzobicyclo[3.2.2]nonenone in ≤90% yield. Kinetic analysis supporting our proposed mechanism was also performed, underscoring the robustness of the developed synthetic pathway.

Semipinacol Rearrangement of Iododifluorohomoallyl Alcohols and Its Application in the Allylic C-H Esterification Reactions

We herein present a study on the Ag(I)-mediated semipinacol rearrangement of iododifluorohomoallyl alcohols, the resulting allylic difluoromethyl ketones underwent oxidative allylic C-H esterification under palladium catalysis in the absence of external ligand. This process yielded a range of difluoromethyl ketones derived from allyl esters in a single operation. The reaction features broad scope of o-nitrobenzoic acids and homoallylic iododifluoroalcohols affording the targeted molecules in synthetically useful yields. Control experiments illustrated that the silver salt acted as not only a Lewis acid to promote the cleavage of a C-I bond and furnish the semipinacol rearrangement but also a co-oxidant in the catalytic cycle for the allylic C-H esterification.

Unified Synthesis of 2-Isocyanoallopupukeanane and 9-Isocyanopupukeanane through a "Contra-biosynthetic" Rearrangement

Herein, we describe our synthetic efforts toward the pupukeanane natural products, in which we have completed the first enantiospecific route to 2-isocyanoallopupukeanane in 10 steps (formal synthesis), enabled by a key Pd-mediated cyclization cascade. This subsequently facilitated an unprecedented bio-inspired "contra-biosynthetic" rearrangement, providing divergent access to 9-isocyanopupukeanane in 15 steps (formal synthesis). Computational studies provide insight into the nature of this rearrangement.

Pd(II)-Catalyzed tandem selective dehydrogenative [4+2] annulation of 2-methyl-1,3-cycloalkanediones with olefins

A practical and effective palladium-catalyzed selective dehydrogenative [4+2] annulation of 2-methyl-1,3-cycloalkanediones with olefins was reported. The active 2-methylene-1,3-cycloalkanedione was in situ generated via Pd-catalyzed enolate oxidation processes, and it subsequently reacted with a wide variety of olefins to afford various polysubstituted dihydropyran derivatives in good to excellent yields.

Two distinct protocols for the synthesis of unsymmetrical 3,4-disubstituted maleimides based on transition-metal catalysts

Two tandem catalytic systems are described for the synthesis of novel 3,4-disubstituted maleimides using the same Ugi adducts as starting materials. 4-Aryl-3-pyrrolyl- and 4-aryl-3-indolyl-maleimides were successfully obtained via a Pd(OAc)2/PPh3 based protocol. In contrast, maleimide-fused pyrrolo and indolo[1,2-a]quinolines were obtained in a complementary methodology using CuI/L-proline. These strategies involved a combination of benzylic amine oxidation, trans-amidation, intramolecular Knoevenagel condensation, and N-arylation reactions. Computational investigations provide further insights into this reaction sequence.

A highly sensitive and selective fluorescent probe for rapid detection and intracellular imaging of Pd(II)

A novel near-infrared fluorescent probe (SWJT-13) for detecting Pd2+ ions was designed and synthesized using 3-bromopropargyne group as a recognition site. SWJT-13 can detect Pd2+ ions specifically, which can be quickly recognized by naked eye under natural light. SWJT-13 has a large Stokes shift (155 nm) with LOD of 10.5 nM. The mechanism was verified by 1H NMR, MS, and Gaussian calculations. In addition, the detection of Pd2+ ions by the probe was studied in HeLa cells.

Construction of Functionalized α-Imino Ketones via Pd-Catalyzed C-H Addition to Nitriles/Aerobic Oxidation Sequences

Pd(II)-catalyzed addition of sp2 C-H to nitrile/aerobic oxidation sequences for the preparation of functionalized α-imino ketones is described in which readily available heteroarenes and O-acyl cyanohydrins were employed. Various functionalized targeted molecules can be prepared in good yields with high atom and step economy. Moreover, a broad substrate scope and the ready manipulation and availability of the reaction partners enable this protocol to be appealing to explore the chemical space of the construction of functionalized α-imino ketones with high efficiency.

Defect Engineering of High-Entropy Oxides for Superior Catalytic Oxidation Performance

High-entropy oxides (HEOs) are crucial in various fields (power storage/conversion, electronic devices, and catalysis) owing to their adjustable structural characteristics, fabulous stability, and massive components. However, the current strategies for synthesizing HEOs suffer from low surface area and limited active sites. Herein, we present a salt-assisted strategy with remarkable universality for the preparation of HEOs with high surface area [e.g., HP-(FeCrCoNiCu)xOy: 59 m2/g, HP-(ZnMgNiCuCo)xOy: 49 m2/g, and HP-(CrMnFeNiZn)xOy: 11 m2/g], where HP means high porosity. Especially, HP-(FeCrCoNiCu)xOy with rich-oxygen vacancies promotes catalytic efficiency for hydrocarbon and alcohol oxidation owing to its hierarchical texture and massive oxygen vacancies. Furthermore, density functional theory is utilized to well illustrate the relationship of the structure and catalytic efficiency within the catalysts. This work offers realistic pathway for the large-scale application of HEOs in catalytic areas.

A facile approach to phenothiazinones via catalytic aerobic oxidation: discovery of an antiproliferative agent

The production of bioactive pharmaceutical ingredients in a sustainable manner has become essential in the modern academic and industrial community. Herein, we report a chemically robust and sustainable aerobic oxidation for the synthesis of the phenothiazinone framework, using the commercially available TEMPO/HBF4/NaNO2 co-catalytic system under an ambient atmosphere. The reaction is highly efficient with broad scopes and excellent scalability. Preliminary activity screening led to the discovery of compound 3 as a potent antiproliferative agent. The green synthesis of a variety of sulfur containing heterocycles might encourage the pursuit of biologically valuable molecules in the medicinal field.

Palladium and Iron Cocatalyzed Aerobic Alkene Aminoboration

Aminoboration of simple alkenes with nitrogen nucleophiles remains an unsolved problem in synthetic chemistry; this transformation can be catalyzed by palladium via aminopalladation followed by transmetalation with a diboron reagent. However, this catalytic process faces inherent challenges with instability of the alkylpalladium(II) intermediate toward β-hydride elimination. Herein, we report a palladium/iron cocatalyzed aminoboration, which enables this transformation. We demonstrate these conditions on a variety of alkenes and norbornenes with an array of common nitrogen nucleophiles. In the developed strategy, the iron cocatalyst is crucial to achieving the desired reactivity by serving as a halophilic Lewis acid to release the transmetalation-active cationic alkylpalladium intermediate. Furthermore, it serves as a redox shuttle in the regeneration of the Pd(II) catalyst by reactivation of nanoparticulate palladium.

Ultrasound-assisted acid/enzymatic hydrolysis preparation of loquat kernel porous starch: A carrier with efficient palladium loading capacity

Porous starch, with excellent renewal and thermodynamic stability characteristics, could be utilized as a novel carrier for metals. In this research, starch was obtained from wasted loquat kernel (LKS) and converted into loquat kernel porous starch (LKPS) through ultrasound-assisted acid/enzymatic hydrolysis. Then, LKS and LKPS were utilized for loading with palladium. The porous structures of LKPS were evaluated by the results of water/oil absorption rate and N2 adsorption analysis, and the physicochemical properties of LKPS and starch@Pd were analyzed by FT-IR, XRD, SEM-EDS, ICP-OES, and DSC-TAG. LKPS prepared by the synergistic method formed a better porous structure. Its specific surface area was 2.65 times that of LKS, and the water/oil absorption capabilities were considerably improved to 152.28 % and 129.59 %, respectively. XRD patterns showed that the presence of diffraction peaks at 39.7° and 47.1°, indicating successful palladium loading onto LKPS. The EDS and ICP-OES results revealed that the palladium loading capacity of LKPS was superior to that of LKS, with a significantly increased loading ratio of 2.08 %. In addition, LKPS@Pd exhibited excellent thermal stability, with a temperature range of 310-320 °C. Therefore, LKPS was a palladium carrier with highly efficient loading ratio, and LKPS@Pd had promising properties as a competent catalyst.

Optimizing the Synthetic Potential of O2: Implications of Overpotential in Homogeneous Aerobic Oxidation Catalysis

Molecular oxygen is the quintessential oxidant for organic chemical synthesis, but many challenges continue to limit its utility and breadth of applications. Extensive historical research has focused on overcoming kinetic challenges presented by the ground-state triplet electronic structure of O2 and the various reactivity and selectivity challenges associated with reactive oxygen species derived from O2 reduction. This Perspective will analyze thermodynamic principles underlying catalytic aerobic oxidation reactions, borrowing concepts from the study of the oxygen reduction reaction (ORR) in fuel cells. This analysis is especially important for "oxidase"-type liquid-phase catalytic aerobic oxidation reactions, which proceed by a mechanism that couples two sequential redox half-reactions: (1) substrate oxidation and (2) oxygen reduction, typically affording H2O2 or H2O. The catalysts for these reactions feature redox potentials that lie between the potentials associated with the substrate oxidation and oxygen reduction reactions, and changes in the catalyst potential lead to variations in effective overpotentials for the two half reactions. Catalysts that operate at low ORR overpotential retain a more thermodynamic driving force for the substrate oxidation step, enabling O2 to be used in more challenging oxidations. While catalysts that operate at high ORR overpotential have less driving force available for substrate oxidation, they often exhibit different or improved chemoselectivity relative to the high-potential catalysts. The concepts are elaborated in a series of case studies to highlight their implications for chemical synthesis. Examples include comparisons of (a) NOx/oxoammonium and Cu/nitroxyl catalysts, (b) high-potential quinones and amine oxidase biomimetic quinones, and (c) Pd aerobic oxidation catalysts with or without NOx cocatalysts. In addition, we show how the reductive activation of O2 provides a means to access potentials not accessible with conventional oxidase-type mechanisms. Overall, this analysis highlights the central role of catalyst overpotential in guiding the development of aerobic oxidation reactions.

Organocatalytic Atroposelective Construction of Axially Chiral Compounds Containing Benzimidazole and Quinoline Rings

An organocatalytic atroposelective strategy for the construction of axially chiral compounds containing benzimidazole and quinoline rings is described. The enantioselective heteroannulation reaction of 2-alkynylbenzimidazoles with ortho-aminophenylketones proceeded smoothly in the presence of chiral phosphoric acid to provide axially chiral heterobiaryls with good yields and enantioselectivities. This is the first example of the combination of benzimidazole and quinoline rings at the 2- and 3-positions, respectively, into axially chiral heterobiaryls by this new strategy.

Oxygen transfer reactivity mediated by nickel perfluoroalkyl complexes using molecular oxygen as a terminal oxidant

Nickel perfluoroethyl and perfluoropropyl complexes supported by naphthyridine-type ligands show drastically different aerobic reactivity from their trifluoromethyl analogs resulting in facile oxygen transfer to perfluoroalkyl groups or oxygenation of external organic substrates (phosphines, sulfides, alkenes and alcohols) using O₂ or air as a terminal oxidant. Such mild aerobic oxygenation occurs through the formation of spectroscopically detected transient high-valent Ni^III and structurally characterized mixed-valent Ni^II-Ni^IV intermediates and radical intermediates, resembling O₂ activation reported for some Pd dialkyl complexes. This reactivity is in contrast with the aerobic oxidation of naphthyridine-based Ni(CF₃)₂ complexes resulting in the formation of a stable Ni^III product, which is attributed to the effect of greater steric congestion imposed by longer perfluoroalkyl chains.

Palladium mono-N-protected amino acid complexes: experimental validation of the ligand cooperation model in C-H activation

Mechanistic proposals for the C-H activation reaction enabled by mono-N-protected amino acid ligands (MPAAs) have been supported by DFT calculations. The direct experimental observation of the ligand-assisted C-H activation has not yet been reported due to the lack of well-defined isolated palladium complexes with MPAAs that can serve as models. In this work, palladium complexes bearing chelating MPAAs (NBu₄)[Pd(κ²-N,O-AcN-CHR-COO)(C₆F₅)py] (Ac = MeC(O); R = H, Me) and [Pd(κ²-N,O-MeNH-CH₂-COO)(C₆F₅)py] have been isolated and characterized. Their evolution in a solution containing toluene leads to the C-H activation of the arene and the formation of the C₆F₅-C₆H₄Me coupling products. This process takes place only for the ligands with an acyl protecting group, showing the cooperating role of this group in a complex with a chelating MPAA, therefore experimentally validating this working model. The carboxylate group is inefficient in this C-H activation.

Ring-Opening Reactions of Phosphoramidate Heterocycles

We present protocols for the conversion of phosphoramidate heterocycles into 1,3-chloroamines and 1,3-aminoalcohols. For the formation of chloroamines, our optimized protocol involves heating the phosphoramidate starting material with 4 equivalents of HCl in a dioxane/toluene solvent mixture. The substituents on the phosphoramidate starting material have a profound influence on product formation. Phosphoramidates with a variety of aza-heterocyclic substituents engage, but those containing a 5-chloro-8-quinolinol arm are most competent for 1,3-chloroamine formation. Furthermore, only the phosphoramidate cis diastereomers allow for 1,3-chloroamine formation. X-ray crystallography studies coupled with DFT analysis provide a basis for the stark difference in reactivity between the cis and trans diastereomers. Amino-alcohol products form by heating phosphoramidate heterocycles with aqueous HF in toluene. Here, there is no diastereomeric preference or a requirement for an aza-heterocyclic arm. Based on a substrate survey, both reactions tolerate a broad range of substitution patterns and functional groups. This work establishes that phosphoramidates are competent synthons for interesting amine products and further increases the prominence of tethered aza-Wacker technology.

Oxidization enhances type I ROS generation of AIE-active zwitterionic photosensitizers for photodynamic killing of drug-resistant bacteria

Type I photosensitizers (PSs) with an aggregation-induced emission (AIE) feature have received sustained attention for their excellent theranostic performance in the treatment of clinical diseases. However, the development of AIE-active type I PSs with strong reactive oxygen species (ROS) production capacity remains a challenge due to the lack of in-depth theoretical studies on the aggregate behavior of PSs and rational design strategies. Herein, we proposed a facile oxidization strategy to enhance the ROS generation efficiency of AIE-active type I PSs. Two AIE luminogens, MPD and its oxidized product MPD-O were synthesized. Compared with MPD, the zwitterionic MPD-O showed higher ROS generation efficiency. The introduction of electron-withdrawing oxygen atoms results in the formation of intermolecular hydrogen bonds in the molecular stacking of MPD-O, which endowed MPD-O with more tightly packed arrangement in the aggregate state. Theoretical calculations demonstrated that more accessible intersystem crossing (ISC) channels and larger spin-orbit coupling (SOC) constants provide further explanation for the superior ROS generation efficiency of MPD-O, which evidenced the effectiveness of enhancing the ROS production ability by the oxidization strategy. Moreover, DAPD-O, a cationic derivative of MPD-O, was further synthesized to improve the antibacterial activity of MPD-O, showing excellent photodynamic antibacterial performance against methicillin-resistant S. aureus both in vitro and in vivo. This work elucidates the mechanism of the oxidization strategy for enhancing the ROS production ability of PSs and offers a new guideline for the exploitation of AIE-active type I PSs.

Ni-catalyzed mild hydrogenolysis and oxidations of C-O bonds via carbonate redox tags

Oxygenated molecules are omnipresent in natural as well as artificial settings making the redox transformation of the present C-O bonds a central tool for their processing. However, the required (super)stoichiometric redox agents which traditionally include highly reactive and hazardous reagents pose multiple practical challenges including process safety hazards or special waste management requirements. Here, we report a mild Ni-catalyzed fragmentation strategy based on carbonate redox tags for redox transformations of oxygenated hydrocarbons in the absence of any external redox equivalents or other additives. The purely catalytic process enables the hydrogenolysis of strong C(sp2)-O bonds including that of enol carbonates as well as the catalytic oxidation of C-O bonds under mild conditions down to room temperature. Additionally, we investigated the underlying mechanism and showcased the benefits of carbonate redox tags in multiple applications. More broadly, the work herein demonstrates the potential of redox tags for organic synthesis.

Synergistic effect of hydrogen bonds and π-π interactions of B(C6F5)3·H2O/amides complex: Application in photoredox catalysis

B(C₆F₅)₃·H₂O has been long recognized as a common Brønsted acid. The lack of X-ray crystal structure of B(C₆F₅)₃·H₂O with other substrates has greatly limited the development of a new catalytic mode. In this work, a complex of B(C₆F₅)₃·H₂O and amide 2-phenyl-3,4-dihydroisoquinolin-1(2H)-one with hydrogen bonds and π-π interactions is characterized by X-ray diffraction. Such noncovalent interactions in solution also exist, as verified by NMR, UV-Vis absorption, and fluorescence emission measurements. Moreover, the mixture of amide 2-phenyl-3,4-dihydroisoquinolin-1(2H)-one and B(C₆F₅)₃·H₂O, instead of other tested Brønsted acids, shows a tailing absorption band in the visible light region (400-450 nm). Based on the photoactive properties of the complex, a photoredox catalysis is developed to construct α-aminoamides under mild conditions.

Photochemical Selective Oxidation of Benzyl Alcohols to Aldehydes or Ketones

Using Eosin Y as a metal-free photocatalyst and O₂ as an oxidant, the present study reports a new photochemical protocol that enables efficient aerobic oxidation of various benzyl alcohols to the corresponding aldehydes or ketones in excellent yields under mild reaction conditions. The catalyst system presents good functional-group tolerance and exquisite chemoselectivity, which also can easily be scaled-up to gram scale. Moreover, the methodological applications in practical synthesis of several organic molecules and the primary reaction mechanism were also discussed.

Hybrid Materials Based on Imidazo[4,5-b]porphyrins for Catalytic Oxidation of Sulfides

Heterogenized metalloporphyrin catalysts for oxidation reactions are extensively explored to improve chemical production. In this work, manganese meso-tetraarylporphyrins were immobilized on hydrated mesoporous titanium dioxide (SBET = 705 m2 g−1) through carboxylate or phosphonate anchoring groups separated from the macrocycle by the 2-arylimidazole linker fused across one of the pyrrolic rings of the macrocycle. The element composition of two mesoporous hybrid materials thus obtained were investigated and the integrity of the immobilized complexes was shown by different physicochemical methods. Finally, the catalytic efficiency of the more stable material Mn(TMPIP)/TiO2 with the phosphonate anchor was evaluated in the selective oxidation of sulfides to sulfoxides by molecular oxygen in the presence of isobutyraldehyde (IBA). The heterogenized complex has shown excellent catalytic activity exhibiting a turnover (TON) of ~1100 in a single catalytic run of the sulfoxidation of thioanisole. The catalyst was successfully reused in seven consecutive catalytic cycles.

Syntheses of functionalized benzocoumarins by photoredox catalysis

Direct functionalization of inert C(sp³)-H bonds is an attractive synthetic technology for the preparation of pharmaceutically significant compounds in modern synthetic organic chemistry. In this work, we report a new method for the synthesis of functionalized benzocoumarins through the strategy of activation of multiple C-H bonds on 2-aryl toluenes under visible-light-enabled photoredox conditions. This method has the advantages of high functional group compatibility, mild reaction conditions, and effectively avoiding the use of strong oxidants and precious metal catalysts. Detailed mechanistic investigations, including spectroscopic and electrochemical studies, support the reaction's mechanistic course.