Biological Reduction of Nitric Oxide for Efficient Recovery of Nitrous Oxide as an Energy Source

N2O recovery from wastewater and flue gas via microbial denitrification: Processes and mechanisms

Nitrous oxide (N2O) is increasingly regarded as a significant greenhouse gas implicated in global warming and the depletion of the ozone layer, yet it is also recognized as a valuable resource. This paper comprehensively reviews innovative microbial denitrification techniques for recovering N2O from nitrogenous wastewater and flue gas. Critical analysis is carried out on cutting-edge processes such as the coupled aerobic-anoxic nitrous decomposition operation (CANDO) process, semi-artificial photosynthesis, and the selective utilization of microbial strains, as well as flue gas absorption coupled with heterotrophic/autotrophic denitrification. These processes are highlighted for their potential to facilitate denitrification and enhance the recovery rate of N2O. The review integrates feasible methods for process control and optimization, and presents the underlying mechanisms for N2O recovery through denitrification, primarily achieved by suppressing nitrous oxide reductase (Nos) activity and intensifying competition for electron donors. The paper concludes by recognizing the shortcomings in existing technologies and proposing future research directions, with an emphasis on prioritizing the collection and utilization of N2O while considering environmental sustainability and economic feasibility. Through this review, we aim to inspire interest in the recovery and utilization of N2O, as well as the development and application of related technologies.

Carbon dioxide and weak magnetic field enhance iron-carbon micro-electrolysis combined autotrophic denitrification

Combining iron-carbon micro-electrolysis and autotrophic denitrification is promising for nitrate removal from wastewater. In this study, four continuous reactors were constructed using CO2 and weak magnetic field (WMF) to address challenges like iron passivation and pH stability. In the reactors with CO2 + WMF (10 and 35 mT), the increase in total nitrogen removal efficiency was significantly higher (96.2 ± 1.6 % and 94.1 ± 2.7 %, respectively) than that of the control (51.6 ± 2.7 %), and Fe3O4 converted to low-density FeO(OH) and FeCO3, preventing passivation film formation. The WMF application decreased the N2O emissions flux by 8.7 % and 20.5 %, respectively. With CO2 + WMF, the relative enzyme activity and abundance of denitrifying bacteria, especially unclassified_Rhodocyclaceae and Denitratisoma, increased. Thus, this study demonstrates that CO2 and WMF optimize the nitrate removal process, significantly enhancing removal efficiency, reducing greenhouse gas emissions, and improving process stability.

Competitive enrichment of comammox Nitrospira in floccular sludge

The discovery of complete ammonium oxidation (comammox) has subverted the traditional perception of two-step nitrification, which plays a key role in achieving biological nitrogen removal from wastewater. Floccular sludge-based treatment technologies are being applied at the majority of wastewater treatment plants in service where detection of various abundances and activities of comammox bacteria have been reported. However, limited efforts have been made to enrich and subsequently characterize comammox bacteria in floccular sludge. To this end, a lab-scale sequencing batch reactor (SBR) in the step-feeding mode was applied in this work to enrich comammox bacteria through controlling appropriate operational conditions (dissolved oxygen of 0.5 ± 0.1 g-O2/m3, influent ammonium of 40 g-N/m3 and uncontrolled longer sludge retention time). After 215-d operation, comammox bacteria gradually gained competitive advantages over counterparts in the SBR with a stable nitrification efficiency of 92.2 ± 2.2 %: the relative abundance of Nitrospira reached 42.9 ± 1.3 %, which was 13 times higher than that of Nitrosomonas, and the amoA gene level of comammox bacteria increased to 7.7 ± 2.1 × 106 copies/g-biomass, nearly 50 times higher than that of conventional ammonium-oxidizing bacteria. The enrichment of comammox bacteria, especially Clade A Candidatus Nitrospira nitrosa, in the floccular sludge led to (i) apparent affinity constants for ammonium and oxygen of 3.296 ± 0.989 g-N/m3 and 0.110 ± 0.004 g-O2/m3, respectively, and (ii) significantly low N2O and NO production, with emission factors being 0.136 ± 0.026 % and 0.023 ± 0.013 %, respectively.

Enhancing biological conversion of NO to N2O by utilizing thermophiles instead of mesophiles

The production of nitrous oxide (N2O) through the biological denitrification of nitric oxide (NO) from flue gases has recently been achieved. Although the temperature of flue gas after desulphurization is usually 45-70 °C, all previous studies conducted microbial denitrification of NO under mesophilic conditions (22-35 °C). This study investigated the biological conversion of NO to N2O in both mesophilic (35-45 °C) and thermophilic conditions (45-50 °C). The results showed that temperature has a great impact on N2O production, with a maximum conversion efficiency (from NO to N2O) of 82% achieved at 45 °C, which is obviously higher than the reported conversion efficiencies (24-71%) under mesophilic conditions. Additionally, high-throughput sequencing result showed that the genera Enterococcus, Clostridium, Romboutsia, and Streptococcus were closely related to NO denitrification and N2O production. Microbial communities at 40 and 45 °C had greater metabolizing capacities for polymeric carbon sources. This study suggests that thermophilic condition (45 °C) is more suitable for biological production of N2O from NO.

Towards efficient heterotrophic recovery of N2O via Fe(II)EDTA-NO: A modeling study

Efficient recovery of nitrous oxide (N₂O) through heterotrophic denitrification with the help of Fe(II)EDTA-NO as a chelating agent has been regarded as an ideal technology to treat nitric oxide (NO)-rich flue gas. In this study, an integrated NO-based biological denitrification model was developed to describe the sequential reduction of the NO fixed in Fe(II)EDTA-NO with organic carbon as the electron donor. With the inclusion of only the key pathways contributing to nitrogen transformation, the model was firstly developed and then calibrated/validated and evaluated using the data of batch tests mediated by the identified functional heterotrophic bacteria at various substrates concentrations and then used to explore the possibility of enhancing N₂O recovery by altering the substrates condition and reactor setup. The results demonstrated that the optimal COD/N ratio decreased consistently from 1.5 g-COD/g-N at the initial NO concentration of 40 g-N/m³ to 1.0 g-COD/g-N at the initial NO concentration of 420 g-N/m³. Furthermore, sufficiently increasing the headspace volume of the reactor was considered an ideal strategy to obtain ideal N₂O production of 86.6 % under the studied conditions. The production of high-purity N₂O (98 %) confirmed the practical application potential of this integrated treatment technology to recover a valuable energy resource from NO-rich flue gas.

Complexing agents-free bioelectrochemical trickling systems for highly-efficient mesothermal NO removal: The role of extracellular polymer substances

The biological treatments are promising for nitric oxide (NO) reduction, however, the biotechnology has long suffered from high demands of NO-complexing agents (i.e., Fe(II)EDTA), leading to extra operation costs. In this study, novel complexing agents-free bioelectrochemical systems have been developed for direct NO reduction. The electricity-driven bioelectrochemical trickling system (ED-BTS, a denitrifying biocathode driven by the external electricity and an acetate-consuming bioanode) achieved approximately 68% NO removal without any NO-complexing agents, superior to the bioanode-driven BTS and open-circuit BTS. The extracellular polymeric substances from the biofilms of ED-BTS contained more polysaccharides, humic substrates, and hydrophobic tryptophan that were beneficial for NO reduction. Additionally, the external electricity altered the microbial community toward more denitrifying bacteria and a higher abundance of NO reduction genes (nosZ and cnorB). This study provides a comprehensive understanding of microbial behaviors on the adsorption and reduction of NO and proposes a promising strategy for mesothermal NO biotreatment.

Autotrophic denitrification of NO for effectively recovering N2O through using thiosulfate as sole electron donor

To reclaim nitrous oxide (N₂O) as an energy resource economically, this study developed an autotrophic denitrification-based system with thiosulfate (S₂O₃^2-) and nitric oxide (NO) as electron donor and acceptor, respectively. NO from flue gases is absorbed on Fe(II)EDTA to overcome its low solubility in liquid phase by forming Fe(II)EDTA-NO. Short-term batch tests and long-term continuous experiments were conducted to investigate the N₂O production profile and NO conversion efficiency from thiosulfate-based denitrification under varied Fe (II)EDTA-NO conditions (5-20 mM). Up to 39% of NO was converted to gaseous N₂O at 20 mM Fe(II)EDTA-NO amid batch test due to the inhibition of key enzymatic activities by NO and the acidic conditions following thiosulfate oxidation. Higher Fe(II)EDTA-NO levels induced lower enzymatic activities with N₂OR being suppressed harder than NOR. Microbial diversity was reduced in the continuous thiosulfate-driven Fe(II)EDTA-NO-based denitrification system. NO-resistant bacteria and sulfide-tolerant denitrifiers were enriched, facilitating NO conversion to N₂O thereafter.

Simultaneous nitrification and denitrification of hypersaline wastewater by a robust bacterium Halomonas salifodinae from a repeated-batch acclimation

Biotreatment of hypersaline wastewater requires robust strains with high resistance to activity inhibition and even bacterium death, which remains a worldwide challenge. Here Halomonas salifodinae, a simultaneous nitrification and denitrification (SND) bacterium, was isolated by performing repeated-batch acclimation, showing efficient nitrogen removal at 0-15% salinity and low activity inhibition prominently superior to that of other strains such as Pseudomonas sp. and Acinetobacter sp. Community analysis as well as comparison of microbial activity at different salinities revealed an increased relative abundance of halotolerant populations by stimulating their salt tolerance during the repeated-batch process. For single or mixed nitrogen sources at 15% salinity, the SND efficiencies of the isolated strain reached above 95%. The high activities were attributed to the key enzymes AMO and HAO for nitrification as well as NAP and NIR for denitrification. The findings provide a promising acclimation pathway to obtain robust bacteria for biotreatment of hypersaline wastewater.

Sulfur-driven autotrophic denitrification of nitric oxide for efficient nitrous oxide recovery

Nitrous oxide (N₂ O) was previously deemed as a potent greenhouse gas but is actually an untapped energy source, which can accumulate during the microbial denitrification of nitric oxide (NO). Compared with the organic electron donor required in heterotrophic denitrification, elemental sulfur (S⁰ ) is a promising electron donor alternative due to its cheap cost and low biomass yield in sulfur-driven autotrophic denitrification. However, no effort has been made to test N₂ O recovery from sulfur-driven denitrification of NO so far. Therefore, in this study, batch and continuous experiments were carried out to investigate the NO removal performance and N₂ O recovery potential via sulfur-driven NO-based denitrification under various Fe(II)EDTA-NO concentrations. Efficient energy recovery was achieved, as up to 35.5%-40.9% of NO was converted to N₂ O under various NO concentrations. N₂ O recovery from Fe(II)EDTA-NO could be enhanced by the low bioavailability of sulfur and the acid environment caused by sulfur oxidation. The NO reductase (NOR) and N₂ O reductase (N₂ OR) were inhibited distinctively at relatively low NO levels, leading to efficient N₂ O accumulation, but were suppressed irreversibly at NO level beyond 15 mM in continuous experiments. Such results indicated that the regulation of NO at a relatively low level would benefit the system stability and NO removal capacity during long-term system operation. The continuous operation of the sulfur-driven Fe(II)EDTA-NO-based denitrification reduced the overall microbial diversity but enriched several key microbial community. Thauera, Thermomonas, and Arenimonas that are able to carry out sulfur-driven autotrophic denitrification became the dominant organisms with their relative abundance increased from 25.8% to 68.3%, collectively.

Circular economy-driven ammonium recovery from municipal wastewater: State of the art, challenges and solutions forward

In current biological nitrogen removal (BNR) processes, most of ammonium in municipal wastewater is biologically transformed to nitrogen gas, making ammonium recovery impossible. Thus, this article aims to provide a holistic review with in-depth discussions on (i) current BNR processes for municipal wastewater treatment, (ii) environmental and economic costs behind ammonium in municipal wastewater, (iii) state of the art of ammonium recovery from municipal wastewater including anaerobic membrane bioreactor turning municipal wastewater to a liquid fertilizer, capturing ammonium in phototrophic biomass, waste activated sludge for land application, bioelectrochemical systems, biological conversion of ammonium to nitrous oxide as a fuel oxidizer, and adsorption, (iv) feasibility and challenge of adsorption for ammonium recovery from municipal wastewater and (v) innovative municipal wastewater reclamation processes coupled with ammonium recovery. Moving forward, municipal wastewater reclamation and resource recovery should be addressed under the framework of circular economy.