Cross-linked Graphene Oxide Framework Membranes with Robust Nano-Channels for Enhanced Sieving Ability

Advanced membrane-based high-value metal recovery from wastewater

Considering the circular economy and environmental protection, sustainable recovery of high-value metals from wastewater has become a prominent concern. Unlike conventional methods featuring extensive chemicals or energy consumption, membrane separation technology plays a crucial role in facilitating the sustainable and efficient recovery of valuable metals from wastewater due to its attractive features. In this review, we first briefly summarize the sustainable supply chain and significance of sustainable recovery of aqueous high-value metals. Then, we review the most recent advances and application potential in promising state-of-the-art membrane-based technologies for recovery of high-value metals (silver, gold, rhenium, platinum, ruthenium, palladium, iridium, osmium, and rhodium) from wastewater effluents. In particular, pressure-based membranes, liquid membranes, membrane distillation, forward osmosis, electrodialysis and membrane-based hybrid technologies and their mechanism of high-value metal recovery is thoroughly discussed. Then, engineering application and economic sustainability are also discussed for membrane-based high-value metal recovery. The review finally concludes with a critical and insightful overview of the techno-economic viability and future research direction of membrane technologies for efficient high-value metal recovery from wastewater.

Iron Nanoparticles-Confined Graphene Oxide Membranes Coupled with Sulfite-Based Advanced Reduction Processes for Highly Efficient and Stable Removal of Bromate

Advanced reduction processes (ARPs) are promising for pollutant removal in drinking water treatment. In this study, we demonstrated highly efficient reduction of bromate, a harmful disinfection byproduct, by coupling ARPs with an iron nanoparticles-intercalated graphene oxide (GO@FeNPs) catalytic membrane. In the presence of 1.0 mM sulfite (S(IV)), the GO@FeNPs membrane/S(IV) system achieved nearly complete removal of 80 μg/L bromate in 3 min. The first-order reaction rate constant for bromate removal in this system was 420 ± 42 min-1, up to 5 orders of magnitude faster than previously reported ARPs. The GO@FeNPs catalytic membrane may offer potential advantages of nanoconfinement and facilitated electron shuttling in addition to the high surface area of the fine FeNPs, leading to the remarkable ARP performance. The GO@FeNPs membrane showed excellent stability, maintaining >97.0% bromate removal over 20 cycles of repeated runs. The membrane can also be applied for fast catalytic reduction of other oxyanions, showing >98.0% removal of nitrate and chlorate. This work may present a viable option for utilizing high-performance reductive catalytic membranes for water decontamination.

Effectively Sieving Alkali Metal Ions Using Functionalized Graphene Oxide Membranes by Exploiting Water-Repellent Interactions

Sieving membranes capable of discerning different alkali metal ions are important for many technologies, such as energy, environment, and life science. Recently, two-dimensional (2D) materials have been extensively explored for the creation of sieving membranes with angstrom-scale channels. However, because of the same charge and similar hydrated sizes, mostly laminated membranes typically show low selectivity (<10). Herein, we report a facile and scalable method for functionalizing graphene oxide (GO) laminates by dually grafting cations and water-repellent dimethylsiloxane (DMDMS) molecules to achieve high selectivities of ∼50 and ∼20 toward the transport of Cs+/Li+ and K+/Li+ ion pairs, surpassing many of the state-of-the-art laminated membranes. The enhanced selectivity for alkali metal ions can be credited to a dual impact: (i) strong hydrophobic interactions between the incident cations' hydration shells and the water-repellent DMDMS; (ii) the efficient screening of electrostatic interactions that hamper selectivity.

Hierarchical Incorporation of Reduced Graphene Oxide into Anisotropic Cellulose Nanofiber Foams Improves Their Thermal Insulation

Anisotropic cellulose nanofiber (CNF) foams represent the state-of-the-art in renewable insulation. These foams consist of large (diameter >10 μm) uniaxially aligned macropores with mesoporous pore-walls and aligned CNF. The foams show anisotropic thermal conduction, where heat transports more efficiently in the axial direction (along the aligned CNF and macropores) than in the radial direction (perpendicular to the aligned CNF and macropores). Here we explore the impact on axial and radial thermal conductivity upon depositing a thin film of reduced graphene oxide (rGO) on the macropore walls in anisotropic CNF foams. To obtain rGO films on the foam walls we developed liquid-phase self-assembly to deposit rGO in a layer-by-layer fashion. Using electron and ion microscopy, we thoroughly characterized the resulting rGO-CNF foams and confirmed the successful deposition of rGO. These hierarchical rGO-CNF foams show lower radial thermal conductivity (λr) across a wide range of relative humidity compared to CNF control foams. Our work therefore demonstrates a potential method for improved thermal insulation in anisotropic CNF foams and introduces versatile self-assembly for postmodification of such foams.

Modulation of Interlayer Nanochannels via the Moderate Heat Treatment of Graphene Oxide Membranes

In response to the phenomenon of interlayer transport channel swelling caused by the hydration of oxygen-containing functional groups on the GO membrane surface, a moderate heat treatment method was employed to controllably reduce the graphene oxide (GO) membrane and prepare a reduced GO composite nanofiltration membrane (mixed cellulose membrane (MCE)/ethylenediamine (EDA)/reduced GO-X (RGO-X)). The associations of different heat treatment temperatures with the hydrophilicity, interlayer structure, permeability and dye/salt rejection properties of GO membranes were systematically explored. The results indicated that the oxygen-containing groups of the GO membrane were partially eliminated after heat treatment, and the hydrophilicity was weakened. This effectively weakened the hydration between the GO membrane and the water molecules and inhibited the swelling of the oxidized graphene membrane. In the dye desalination test, the MCE/EDA/RGO membrane exhibited an ultra-high rejection rate of over 97% for methylene blue (MB) dye molecules. In addition, heat treatment increased the structural defects of the GO membrane and promoted the fast passage of water molecules via the membrane. In pure water flux testing, the water flux of the membrane remained above 46.58 Lm-2h-1bar-1, while the salt rejection rate was relatively low.

Functionalized 2D membranes for separations at the 1-nm scale

The ongoing evolution of two-dimensional (2D) material-based membranes has prompted the realization of mass separations at the 1-nm scale due to their well-defined selective nano- and subnanochannels. Strategic membrane functionalization is further found to be key to augmenting channel accuracy and efficiency in distinguishing ions, gases and molecules within this range and is thus trending as a research focus in energy-, resource-, environment- and pharmaceutical-related applications. In this review, we present the fundamentals underpinning functionalized 2D membranes in various separations, elucidating the critical "method-interaction-property" relationship. Starting with an introduction to various functionalization strategies, we focus our discussion on functionalization-induced channel-species interactions and reveal how they shape the transport- and operation-related features of the membrane in different scenarios. We also highlight the limitations and challenges of current functionalized 2D membranes and outline the necessary breakthroughs needed to apply them as reliable and high-performance separation units across industries in the future.

Enhanced water treatment performance of ceramic-based forward osmosis membranes via MOF interlayer

Forward osmosis (FO) membrane processes could operate without hydraulic pressures, enabling the efficient treatment of wastewaters with mitigated membrane fouling and enhanced efficiency. Designing a high-performance polyamide (PA) layer on ceramic substrates remains a challenge for FO desalination applications. Herein, we report the enhanced water treatment performance of thin-film nanocomposite ceramic-based FO membranes via an in situ grown Zr-MOF (UiO-66-NH2) interlayer. With the Zr-MOF interlayer, the ceramic-based FO membranes exhibit lower thickness, higher cross-linking degree, and increased surface roughness, leading to higher water flux of 27.38 L m-2 h-1 and lower reverse salt flux of 3.45 g m-2 h-1. The ceramic-based FO membranes with Zr-MOF interlayer not only have an application potential in harsh environments such as acidic solution (pH 3) and alkaline solution (pH 11), but also exhibit promising water and reverse salt transport properties, which are better than most MOF-incorporated PA membranes. Furthermore, the membranes could reject major species (ions, oil and organics) with rejections ＞94 % and water flux of 22.62-14.35 L m-2 h-1 in the treatment of actual alkaline industrial wastewater (pH 8.6). This rational design proposed in this study is not only applicable for the development of a high-quality ceramic-based FO membrane with enhanced performance but also can be potentially extended to more challenging water treatment applications.

Covalent functionalization of 1D and 2D sp2-carbon nanoallotropes - twelve years of progress (2011-2023)

Carbon nanoallotropes have attracted significant attention in the field of materials science due to their unique combination of physicochemical and biological properties, with numerous applications. One-dimensional (1D) and two-dimensional (2D) sp2-carbon nanoallotropes, such as carbon nanohorns (CNHs), carbon nanotubes (CNTs), and graphene, have emerged as prominent candidates for a variety of technological advancements. To fully exploit their exceptional characteristics, the covalent functionalization of these nanostructures may alleviate the problems with the processing and final performance. This route of the carbon nanoallotrope functionalization is based on a covalent attachment of functional groups or molecules (via linkers of various strengths) to their surfaces, enabling precise control over physical, chemical, biological, and electronic properties. Such an approach opens up new avenues for tailoring the nanoallotrope characteristics, such as solubility/dispersibility, reactivity, and interactions with other materials. Over more than the last decade, significant progress has been made in the covalent functionalization of both 1D and 2D sp2-carbon nanoallotropes, paving the way for diverse applications in the nanoelectronics, energy storage, sensing, and biomedical fields. In this comprehensive review, we provide state-of-the-art advancements and achievements in the covalent functionalization of 1D and 2D sp2-carbon nanoallotropes during the past dozen years. We aim to highlight the key strategies, methodologies, and breakthroughs that have significantly contributed to this field. Eventually, we discuss the implications of those advancements and explore the opportunities for future research and applications.

Bio-Inspired Subnanofluidics: Advanced Fabrication and Functionalization

Biological ion channels can realize high-speed and high-selective ion transport through the protein filter with the sub-1-nanometer channel. Inspired by biological ion channels, various kinds of artificial subnanopores, subnanochannels, and subnanoslits with improved ion selectivity and permeability are recently developed for efficient separation, energy conversion, and biosensing. This review article discusses the advanced fabrication and functionalization methods for constructing subnanofluidic pores, channels, tubes, and slits, which have shown great potential for various applications. Novel fabrication methods for producing subnanofluidics, including top-down techniques such as electron beam etching, ion irradiation, and electrochemical etching, as well as bottom-up approaches starting from advanced microporous frameworks, microporous polymers, lipid bilayer embedded subnanochannels, and stacked 2D materials are well summarized. Meanwhile, the functionalization methods of subnanochannels are discussed based on the introduction of functional groups, which are classified into direct synthesis, covalent bond modifications, and functional molecule fillings. These methods have enabled the construction of subnanochannels with precise control of structure, size, and functionality. The current progress, challenges, and future directions in the field of subnanofluidic are also discussed.

Reduction-enhanced water flux through layered graphene oxide (GO) membranes stabilized with H3O+ and OH- ions

Graphene oxide (GO) is one of the most promising candidates for next generation of atomically thin membranes. Nevertheless, one of the major issues for real world application of GO membranes is their undesirable swelling in an aqueous environment. Recently, we demonstrated that generation of H3O+ and OH- ions (e.g., with an external electric field) in the interlayer gallery could impart aqueous stability to the layered GO membranes (A. Gogoi, ACS Appl. Mater. Interfaces, 2022, 14, 34946). This, however, compromises the water flux through the membrane. In this study, we report on reducing the GO nanosheets as a solution to this issue. With the reduction of the GO nanosheets, the water flux through the layered GO membrane initially increases and then decreases again beyond a certain degree of reduction. Here, two key factors are at play. Firstly, the instability of the H-bond network between water molecules and the GO nanosheets, which increases the water flux. Secondly, the pore size reduction in the interlayer gallery of the membranes, which decreases the water flux. We also observe a significant improvement in the salt rejection of the membranes, due to the dissociation of water molecules in the interlayer gallery. In particular, for the case of 10% water dissociation, the water flux through the membranes can be enhanced without altering its selectivity. This is an encouraging observation as it breaks the traditional tradeoff between water flux and salt rejection of a membrane.

Small Channels Assembled by Multilayer ZIF-8 in Nanocomposite Membranes for Filtration of Ofloxacin in Water

Metal-organic framework (MOF)-based hybrid membranes still face many unsolved difficulties in the field of liquid separation, with a reliable production technique standing out, in particular, for the water-stable MOF membranes. In this study, zeolitic imidazolate framework-8 (ZIF-8) with acceptable water stability, favorable polymer affinity, and high selectivity was meticulously grafted on commercial poly(vinylidene fluoride) (PVDF) via substrate carboxylation-assisted etching and then overlaid onto PVDF to fabricate a novel hybrid membrane by a layer-by-layer self-assembly method. The optimal membrane manufacturing conditions, including assembly time (10 min), Hmim/Zn2+ molar ratio (8:1), and optimal layer number (three layers), were thoroughly investigated for cutting-off ofloxacin in water filtration. Under low pressure, a nanofiltration scale permeability of about 199.2 L m-2 h-1 MPa-1 and 97.9% rejection of ofloxacin were obtained in bench-scale tests based on the synergistic effect of the Donnan effect and steric hindrance. More significantly, the resulting hybrid membrane demonstrated excellent hydrophilicity, high antifouling, and mechanical and repeatability performances, suggesting promising application possibilities in real-world wastewater filtering settings.

Alkadiyne-Pyrene Conjugated Frameworks with Surface Exclusion Effect for Ultrafast Seawater Desalination

Billions of populations are suffering from the supply-demand imbalance of clean water, resulting in a global sustainability crisis. Membrane desalination is a promising method to produce fresh water from saline waters. However, conventional membranes often encounter challenges related to low water permeation, negatively impacting energy efficiency and water productivity. Herein, we achieve ultrafast desalination over the newly developed alkadiyne-pyrene conjugated frameworks membrane supported on a porous copper hollow fiber. With membrane distillation, the membrane exhibits nearly complete NaCl rejection (>99.9%) and ultrahigh fluxes (∼500 L m-2 h-1) from the seawater salinity-level NaCl solutions, which surpass the commercial polymeric membranes with at least 1 order of magnitude higher permeability. Experimental and theoretical investigations suggest that the large aspect ratio of membrane pores and the high evaporation area contribute to the high flux, and the graphene-like hydrophobic surface of conjugated frameworks exhibits complete salt exclusion. The simulations also confirm that the intraplanar pores of frameworks are impermeable for water and ions.

Advanced Lithium Extraction Membranes Derived from Tagged-Modification of Polyamide Networks

Efficient Mg2+ /Li+ separation is crucial to combating the lithium shortage worldwide, yet current nanofiltration membranes suffer from low efficacy and/or poor scalability, because desirable properties of membranes are entangled and there is a trade-off. This work reports a "tagged-modification" approach to tackle the challenge. A mixture of 3-bromo-trimethylpropan-1-aminium bromide (E1 ) and 3-aminopropyltrimethylazanium (E2 ) was designed to modify polyethylenimine - trimesoyl chloride (PEI-TMC) membranes. E1 and E2 reacted with the PEI and TMC, respectively, and thus, the membrane properties (hydrophilicity, pore sizes, charge) were untangled and intensified simultaneously. The permeance (34.3 L m-2  h-1  bar-1 ) and Mg2+ /Li+ selectivity (23.2) of the modified membranes are about 4 times and 2 times higher than the pristine membrane, and they remain stable in a 30-days test. The permeance is the highest among all analogous nanofiltration membranes. The tagged-modification method enables the preparation of large-area membranes and modules that produce high-purity lithium carbonate (Li2 CO3 ) from simulated brine.

Controlling the spacing of the linked graphene oxide system with dithiol linkers under confinement

2D nanoscale confined systems exhibit behavior that is markedly different from that observed at the macroscale. Confinement can be tuned by controlling the interlayer spacing between confining layers using organic dithiol linkers. Adjusting spacing and selective intercalation have important impacts for catalysis, superconductivity, spin engineering, sodium ion batteries, 2D magnets, optoelectronics, and many other applications. In this study, we report how reaction conditions and organic linkers can be used to create variable, reproducible spacings between graphene oxide to provide confinement systems. We determined the conditions under which the spacing can be variably adjusted by the type of linker used, the concentration of the linker, and the reaction conditions. Employing dithiol linkers of different lengths, such as three (TPDT) and four (QPDT) aromatic rings, we can adjust the spacing between graphene oxide layers under varied reaction conditions. Here, we show that by varying dithiol linker length and using different reaction conditions, we can reproducibly control the spacing between graphene oxide layers from 0.37 nm to over 0.50 nm.

Permselectivity and Ionic Conductivity Study of Na+ and Br- Ions in Graphene Oxide-Based Membranes for Redox Flow Batteries

Permselectivity of a membrane is central for the development of electrochemical energy storage devices with two redox couples, such as redox flow batteries (RFBs). In RFBs, Br3-/Br- couple is often used as a catholyte which can cross over to the anolyte, limiting the battery's lifetime. Naturally, the development of permselective membranes is essential to the success of RFBs since state-of-the-art perfluorosulfonic acid (PFSA) is too costly. This study investigates membranes of graphene oxide (GO), polyvinylpyrrolidone (PVP), and imidazole (Im) as binder and linker, respectively. The GO membranes are compared to a standard PFSA membrane in terms of ionic conductivity (Na+) and permselectivity (exclusion of Br-). The ionic conduction is evaluated from electrochemical impedance spectroscopy and the permselectivity from two-compartment diffusion cells in a four-electrode system. Our findings suggest that the GO membranes reach conductivity and permselectivity comparable with standard PFSA membranes.

Side-Chain-Dependent Functional Intercalations in Graphene Oxide Membranes for Selective Water and Ion Transport

Subnanometer interlayer space in graphene oxide (GO) laminates is desirable for use as permselective membrane nanochannels. Although the facile modification of the local structure of GO enables various nanochannel functionalizations, precisely controlling nanochannel space is still a challenge, and the roles of confined nanochannel chemistry in selective water/ion separation have not been clearly defined. In this study, macrocyclic molecules with consistent basal plane but varying side groups were used to conjunct with GO for modified nanochannels in laminates. We demonstrated the side-group dependence of both the angstrom-precision tunability for channel free space and the energy barrier setting for ion transport, which challenges the permeability-selectivity trade-off with a slightly decreased permeance from 1.1 to 0.9 L m^-2 h^-1 bar^-1 but an increased salt rejection from 85% to 95%. This study provides insights into the functional-group-dependent intercalation modifications of GO laminates for understanding laminate structural control and nanochannel design.

A Facile Way to Fabricate GO-EDA/Al2O3 Tubular Nanofiltration Membranes with Enhanced Desalination Stability via Fine-Tuning the pH of the Membrane-Forming Suspensions

Pristine graphene oxide (GO)-based membranes have proven promising for molecular and ion separation owing to efficient molecular transport nanochannels, but their separation ability in an aqueous environment is limited by the natural swelling tendency of GO. To obtain a novel membrane with anti-swelling behavior and remarkable desalination capability, we used the Al₂O₃ tubular membrane with an average pore size of 20 nm as the substrate and fabricated several GO nanofiltration ceramic membranes with different interlayer structures and surface charges by fine-tuning the pH of the GO-EDA membrane-forming suspension (pH = 7, 9, 11). The resultant membranes could maintain desalination stability, whether immersed in water for 680 h or operated under a high-pressure environment. When the pH of the membrane-forming suspension was 11, the prepared GE-11 membrane showed a rejection of 91.5% (measured at 5 bar) towards 1 mM Na₂SO₄ after soaking in water for 680 h. An increase in the transmembrane pressure to 20 bar resulted in an increase in the rejection towards the 1 mM Na₂SO₄ solution to 96.3%, and an increase in the permeance to 3.7 L·m^-2·h^-1·bar^-1. The proposed strategy in varying charge repulsion is beneficial to the future development of GO-derived nanofiltration ceramic membranes.

Ion and Molecule Sieving through Highly Stable Graphene-Based Laminar Membranes

Biological ion channels use both their sizes and residual groups to reject large ions and molecules and allow highly selective permeation of small species with similar sizes. To realize these properties in artificial membranes, the main challenge is the precise control of both the channel size and the interior at the nanoscale. Here we report the permeation of ions and molecules through interlayer channels in graphene-based laminar membranes. The amino groups decorated on channel walls are found to form hydrogen bond networks with intercalated water molecules, thus providing a highly stable laminate structure and a controlled channel size. Solutes with hydration diameters of >10 Å are precisely sieved out. Small species permeate through with selectivities of up to a few thousand, governed by their distinct electrical interactions with channels depending on the atomistic distance from the charged species to the channel walls. Our work offers important insights into manipulating channel structures for enhanced separation performance at the nanoscale.

Cross-Linked and Doped Graphene Oxide Membranes with Excellent Antifouling Capacity for Rejection of Antibiotics and Salts

Graphene oxide (GO) membranes have suffered from the instability of water permeability and low rejection of pollutant separation. In this paper, a reasonable modification protocol for GO nanosheets at the molecular level was proposed. A molecular cross-linking strategy was adopted to regulate the interlayer spacing of GO nanosheets, and nanofiltration membranes with high water stability and excellent antifouling capacity were prepared, which could effectively reject antibiotics and salts. The GO₁-MPD_0.5 (the mass ratio of GO nanosheets to MPD is 1:0.5) and GO/GO₁-MPD_0.5-0.25 (the doping ratio of GO₁-MPD_0.5 is 25%) membranes had stable water permeability of 4.22 ± 0.06 and 3.65 ± 0.11 L m^-2 h^-1 bar^-1, and the rejection rates for ciprofloxacin (CIP) and ofloxacin (OFX) were 93.35 ± 3.62 and 95.48 ± 2.97 and 85.89 ± 6.52 and 88.21 ± 3.67%, respectively. Molecular dynamics simulations well explained the high water stability of membranes, and the cross-linked hydrophobic benzene ring played a role in the rejection of pollutant molecules. Moreover, the GO₁-MPD_0.5 membrane showed excellent antifouling capacity and the flux recovery ratio (FRR) was more than 98%. This paper provides a new idea for the design of nanofiltration membranes with high stability and good rejection permeability at the molecular level and provides a prospect for the application of nanofiltration membranes in practical water treatment and water purification.

Simultaneous degradation and separation of antibiotics in sewage effluent by photocatalytic nanofiltration membrane in a continuous dynamic process

Bifunctional photocatalytic nanofiltration (PNF) membrane is increasingly concerned in practical micro-polluted water purification, but there are still several bottlenecks that inhibit its practicality. In this context, the feasibility of a novel metal-free and visible light-responsive surface-anchored PNF membrane for simultaneously removing target antibiotics in real sewage effluent in a continuous dynamic process was explored. The results showed that the optimal PNF-4 membrane was expectedly consisted of an inside tight sub-nanopore structured separation layer and an outside thinner, smoother, super hydrophilic mesoporous degradation layer, respectively. Consequently, the activated PNF-4 membrane could synergistically reduce trimethoprim and sulfamethoxazole concentrations to below two orders of magnitude, accompanying with almost constant high water permeability, suggesting that the hydrophilic modification of the mesoporous degradation layer basically offsets its inherent hydraulic resistance. Also, after repeating the fouling-physical rinsing process three times lasted for 78 h, only sporadic adherent contaminants remained onto the top surface, together with the minimal total and irreversible fouling ratios (as low as 7.2% and 1.2%, respectively), strongly demonstrated that PNF-4 membrane displayed good self-cleaning performance. Undoubtedly, this will significantly reduce its potential cleaning frequency and maintenance cost in long-term operation. Meanwhile, the acute and chronic biotoxicities of its permeate to Virbrio qinghaiensis sp. -67 were also reduced sharply to 2.22% and 0.45%, respectively. All of these evidences suggest that the dual functions of PNF-4 membrane are synergetic in an uninterrupted permeating process. It will provide useful insights for continuously enhancing the practicality and effectiveness of PNF membrane in actual micro-polluted water purification scenarios.

Bioinspired Macrocyclic Molecule Supported Two-Dimensional Lamellar Membrane with Robust Interlayer Structure for High-Efficiency Nanofiltration

2D lamellar membranes (2DLMs) are used for efficient desalination and nanofiltration. However, weak interactions between adjacent stacked nanosheets result in susceptibility to swelling that limits practical applicability. Inspired by the super adhesion of multi-point suction cups on octopus tentacles, a 2DLM is constructed from Ti3 C2 Tx MXene supported by the macrocyclic "multi-point" molecule cucurbit[5]uril (CB5) and demonstrated for nanofiltration of methyl blue (MB) and enrichment of uranyl carbonate. Experimental results and density functional theory calculations indicate that CB5 rivets to the surface of the nanoflakes through strong stable interactions between its multiple binding sites and surface hydroxyl functional groups on MXene nanosheets. This novel 2DLM exhibits excellent nanofiltration performance (69 L m-2 h-1 bar-1 permeance with 93.6% rejection for MB) and can be recycled at least 30 times without significant degradation. The 2DLM exhibits excellent swelling resistance at high salinity, with a demonstration of selective enrichment of uranyl carbonate from artificial water and natural seawater. The results provide a new strategy for constructing highly stable 2DLMs with interlayer spacing controllable from sub-nano to nanometer scales, for size-selective sieving of molecules and ions, high-efficiency nanofiltration, and other applications.

Next-generation graphene oxide additives composite membranes for emerging organic micropollutants removal: Separation, adsorption and degradation

In the past two decades, membrane technology has attracted considerable interest as a viable and promising method for water purification. Emerging organic micropollutants (EOMPs) in wastewater have trace, persistent, highly variable quantities and types, develop hazardous intermediates and are diffusible. These primary issues affect EOMPs polluted wastewater on an industrial scale differently than in a lab, challenging membranes-based EOMP removal. Graphene oxide (GO) promises state-of-the-art membrane synthesis technologies and use in EOMPs removal systems due to its superior physicochemical, mechanical, and electrical qualities and high oxygen content. This critical review highlights the recent advancements in the synthesis of next-generation GO membranes with diverse membrane substrates such as ceramic, polyethersulfone (PES), and polyvinylidene fluoride (PVDF). The EOMPs removal efficiencies of GO membranes in filtration, adsorption (incorporated with metal, nanomaterial in biodegradable polymer and biomimetic membranes), and degradation (in catalytic, photo-Fenton, photocatalytic and electrocatalytic membranes) and corresponding removal mechanisms of different EOMPs are also depicted. GO-assisted water treatment strategies were further assessed by various influencing factors, including applied water flow mode and membrane properties (e.g., permeability, hydrophily, mechanical stability, and fouling). GO additive membranes showed better permeability, hydrophilicity, high water flux, and fouling resistance than pristine membranes. Likewise, degradation combined with filtration is two times more effective than alone, while crossflow mode improves the photocatalytic degradation performance of the system. GO integration in polymer membranes enhances their stability, facilitates photocatalytic processes, and gravity-driven GO membranes enable filtration of pollutants at low pressure, making membrane filtration more inexpensive. However, simultaneous removal of multiple contaminants with contrasting characteristics and variable efficiencies in different systems demands further optimization in GO-mediated membranes. This review concludes with identifying future critical research directions to promote research for determining the GO-assisted OMPs removal membrane technology nexus and maximizing this technique for industrial application.

Boosting the Performance of Nanofiltration Membranes in Removing Organic Micropollutants: Trade-Off Effect, Strategy Evaluation, and Prospective Development

In view of the high risks brought about by organic micropollutants (OMPs), nanofiltration (NF) processes have been playing a vital role in advanced water and wastewater treatment, owing to the high membrane performance in rejection of OMPs, permeation of water, and passage of mineral salts. Though numerous studies have been devoted to evaluating and technically enhancing membrane performance in removing various OMPs, the trade-off effect between water permeance and water/OMP selectivity for state-of-the-art membranes remains far from being understood. Knowledge of this effect is significant for comparing and guiding membrane development works toward cost-efficient OMP removal. In this work, we comprehensively assessed the performance of 88 NF membranes, commercialized or newly developed, based on their water permeance and OMP rejection data published in the literature. The effectiveness and underlying mechanisms of various modification methods in tailoring properties and in turn performance of the mainstream polyamide (PA) thin-film composite (TFC) membranes were quantitatively analyzed. The trade-off effect was demonstrated by the abundant data from both experimental measurements and machine learning-based prediction. On this basis, the advancement of novel membranes was benchmarked by the performance upper-bound revealed by commercial membranes and lab-made PA membranes. We also assessed the potentials of current NF membranes in selectively separating OMPs from inorganic salts and identified the future research perspectives to achieve further enhancement in OMP removal and salt/OMP selectivity of NF membranes.

Silicon carbide catalytic ceramic membranes with nano-wire structure for enhanced anti-fouling performance

Membrane fouling is a critical challenge for current ceramic membranes, which suffer from low flux and insufficient removal. Development of self-cleaning catalytic ceramic membranes is promising to address this challenge. Herein, we design heterogeneous silicon carbide ceramic membranes featuring a novel structure of g-C₃N₄-decorated β-SiC nano-wire catalytic functional layer, which enables enhanced anti-fouling self-cleaning performance. At chemical harsh (alkaline or especially acidic) conditions, the nano-wire membrane exhibits catalysis-enhanced removal performance for organic contaminants. Unlike conventional particle-packing membrane structure, such a nano-wire network membrane structure has not only high porosity (56.1%), but exceptional water permeance (110 L·m^-2·h^-1·bar^-1) and removal (100%) of organic substance under simulated sunlight, outperforming state-of-the-art organic membranes and ceramic membranes. Superoxide radical (∙O₂^-) was experimentally confirmed to be major reactive species responsible for self-cleaning function. We also propose a catalytic mechanism model with radical formation pathway, enabled by the as-formed g-C₃N₄@β-SiC heterojunction structure with reduced electron-hole recombination. This work would provide new insights into not only rational design of next-generation ceramic membranes with self-cleaning function but also more applications of efficient treatment of refractory wastewaters containing degradable organic substances by using such membranes.

Progress in alumina ceramic membranes for water purification: Status and prospects

Ceramic membranes have gained increasing attention in recent years for the removal of various contaminants from water. Alumina membrane is considered as one of the most important ceramic membranes, which plays important roles not only in separation processes such as microfiltration, ultrafiltration, and nanofiltration, but also in catalysis- and adsorption- enhanced separation applications in water purification and wastewater treatment. However, there is currently still lack of a comprehensive critical review about alumina membranes for water purification. In this review, we first discuss recent developments of alumina membranes, and then critically introduce the state-of-the-art strategies for lowering fabrication cost, improving membrane performances and mitigating membrane fouling. Especially, aiming to improve membrane performance, some emerging methods are summarized such as tailoring membrane structure, developing flexible membranes, designing nano-pores for precise separation, and enhancing multi-functionalities. In addition, engineering applications of alumina membranes for water purification are also briefly introduced. Finally, the prospects for future research on alumina membranes are proposed, such as economic preparation/application, challenging precise separation, enriching multi-functionalities, and clarifying separation mechanisms.

Metal-free graphene-based catalytic membranes for persulfate activation toward organic pollutant removal: a review

Owing to their ultrathin two-dimensional structure and efficient catalytic ability for persulfate activation, graphene-based nanocarbons exhibit considerable application potential in fabricating carbonaceous composite membranes for in situ catalytic oxidation to remove organic pollutants. This approach offers significant advantages over conventional batch systems. However, the relationships between the physicochemical properties of carbon mats and performance of graphene-based catalytic membranes in water purification remain ambiguous. Herein, we summarize the main mechanisms of in situ catalytic oxidation and the facile fabrication strategies of carbonaceous composite membranes. Different factors influencing the performance of graphene-based catalytic membranes are comprehensively discussed. The defective level, heteroatom doping, and stacking morphology of carbon mats and operational conditions during filtration play critical roles in the oxidative degradation of target pollutants. Long-term operation leads to the deterioration of catalytic activity and transmembrane pressure, especially in the complex water matrix. Finally, the present challenges and future perspectives are presented to improve the anti-fouling performance and catalytic stability of membranes and develop scalable fabrication methods to promote the engineering applications of in situ catalytic oxidation in real water purification.

Cross-linked laminar graphene oxide membranes for wastewater treatment and desalination: A review

Two-dimensional (2D) lamellar graphene oxide (GO) membranes are emerging as attractive materials for molecular separation in water treatment because of their single atomic thickness, excellent hydrophilicity, large specific surface areas, and controllable properties. To yet, commercialization of GO laminar membranes has been hindered by their propensity to swell in hydrated conditions. Thus, chemical crosslinking of GO sheets with the polymer matrix is used to improve GO membrane hydration stability. This review focuses on pertinent themes such as how chemical crosslinking improves the hydration stability, separation performance, and antifouling properties of GO membranes.

Cost and efficiency perspectives of ceramic membranes for water treatment

More robust ceramic membranes with tailorable structures and functions are increasingly employed for water treatment, particularly in some harsh applications for their ultra-long service lifespan due to their high mechanical, structural, chemical and thermal stability and anti-fouling properties. Decreasing cost and enhancing efficiency are two key but quite challenging application-oriented issues for broader and larger-scale engineering application of current ceramic membranes, and are required to make ceramic membranes a highly efficient and economic water treatment technique. In this review, we critically discuss these two significant concerns of both cost and efficiency for water treatment ceramic membranes, focusing on an overview of various advanced strategies and mechanism insights. A brief up-to-date discussion is first introduced about recent developments of ceramic membranes covering the major advances of novel membranes and applications. Then some promising strategies for decreasing the cost of ceramic membranes are discussed, including membrane material cost and processing cost. To fully address the issue of moderate efficiency with single separation function, valuable and considerable insights are provided into recent major progress and mechanism understandings in application with other unit processes, such as advanced oxidation and electrochemistry techniques, to significantly enhance treatment efficiency. Subsequently, a review of recent ceramic membrane applications emphasizing harsh operating environments is presented, such as oil-water separation, saline water, refractory organic and emerging contaminant wastewater treatment. Finally, engineering application, conclusions, and future perspectives of ceramic membrane for water treatment applications are critically discussed offering new insight based on understanding the issues of cost and efficiency.

Simultaneous Electrochemical Exfoliation and Covalent Functionalization of MoS2 Membrane for Ion Sieving

Transition metal dichalcogenide membranes exhibit good antiswelling properties but poor water desalination property. Here, a one-step covalent functionalization of MoS₂ nanosheets for membrane fabrication is reported, which is accomplished by simultaneous exfoliating and grafting the lithium-ion-intercalated MoS₂ in organic iodide water solution. The lithium intercalation amount in MoS₂ is optimized so that the quality of the produced 2D nanosheets is improved with homogeneous size distribution. The lamellar MoS₂ membranes are tested in reverse osmosis (RO), and the functionalized MoS₂ membrane exhibits rejection rates of >90% and >80% for various dyes (Rhodamine B, Crystal Violet, Acid Fuchsin, Methyl Orange, and Evans Blue) and NaCl, respectively. The excellent ion-sieving performance and good water permeability of the functionalized MoS₂ membranes are attributed to the suitable channel widths that are tuned by iodoacetamide. Furthermore, the stability of the functionalized MoS₂ membranes in NaCl and dye solutions is also confirmed by RO tests. Molecular dynamics simulation shows that water molecules tend to form a single layer between the amide-functionalized MoS₂ layers but a double layer between the ethanol-functionalized MoS₂ (MoS₂ -ethanol) layers, which indicates that a less packed structure of water between the MoS₂ -ethanol layers leads to lower hydrodynamic resistance and higher permeation.

Angstrom-scale ion channels towards single-ion selectivity

Artificial ion channels with ion permeability and selectivity comparable to their biological counterparts are highly desired for efficient separation, biosensing, and energy conversion technologies. In the past two decades, both nanoscale and sub-nanoscale ion channels have been successfully fabricated to mimic biological ion channels. Although nanoscale ion channels have achieved intelligent gating and rectification properties, they cannot realize high ion selectivity, especially single-ion selectivity. Artificial angstrom-sized ion channels with narrow pore sizes <1 nm and well-defined pore structures mimicking biological channels have accomplished high ion conductivity and single-ion selectivity. This review comprehensively summarizes the research progress in the rational design and synthesis of artificial subnanometer-sized ion channels with zero-dimensional to three-dimensional pore structures. Then we discuss cation/anion, mono-/di-valent cation, mono-/di-valent anion, and single-ion selectivities of the synthetic ion channels and highlight their potential applications in high-efficiency ion separation, energy conversion, and biological therapeutics. The gaps of single-ion selectivity between artificial and natural channels and the connections between ion selectivity and permeability of synthetic ion channels are covered. Finally, the challenges that need to be addressed in this research field and the perspective of angstrom-scale ion channels are discussed.

Carbonaceous composite membranes for peroxydisulfate activation to remove sulfamethoxazole in a real water matrix

In this study, we fabricated carbonaceous composite membranes by loading integrated mats of nitrogen-doped graphene, reduced graphene oxide, and carbon nanotubes (NG/rGO/CNTs) on a nylon microfiltration substrate and employed it for in-situ catalytic oxidation by activating peroxydisulfate (PDS) for the removal of sulfamethoxazole (SMX) in a real water matrix. The impact of coexisting organics on the performance of carbonaceous catalysis was investigated in the continuous filtration mode. Reusability testing and radical quenching experiments revealed that the non-radical pathways of surface-activated persulfate mainly contributed to SMX degradation. A stable SMX removal flux (r_SMX) of 22.15 mg m^-2·h^-1 was obtained in 24 h when tap water was filtered continuously under a low pressure of 1.78 bar and in a short contact time of 1.4 s, which was slightly lower than the r_SMX of 23.03 mg m^-2·h^-1 performed with deionized water as the control group. In addition, higher contents of protein-, fulvic acid-, and humic acid-like organics resulted in membrane fouling and significantly suppressed SMX removal during long-term filtration. Changes in the production of sulfate ions and the Raman spectra of carbon mats indicated that organics prevent the structural defects of the carbon matrix from participating in PDS activation. Moreover, NG/rGO/CNTs composite membranes coupled with activated persulfate oxidation exhibited good self-cleaning ability, because membrane fouling could be partly reversed by restoring filtration pressure during operation. This study provides a novel and effective oxidation strategy for efficient SMX removal in water purification, allowing the application of carbonaceous catalysis for the selective degradation of emerging contaminants.

Robust zirconia ceramic membrane with exceptional performance for purifying nano-emulsion oily wastewater

While membrane-based oil-water separation has been widely explored, using conventional membranes to treat oily wastewaters remains practically challenging especially when such wastewaters contain more stable nano-sized oil droplets and are of high oil content, and harsh chemical conditions. Herein, we report a novel protocol of efficiently separating both synthetic and real oil nano-emulsions via specially designed robust zirconia membranes. The best-performing zirconia membrane, fabricated at low sintering temperature, has relatively uniform sub-100 nm pores and is underwater superoleophobic. Such zirconia membranes possess not only outstanding separation performance under long-term operation but robust structural stability at harsh conditions. At different cross-flow velocities, a combined model of intermediate pore blocking and cake filtration dominated membrane fouling behavior. Specifically, at high pH value (especially > pH_(IEP)), membrane fouling was effectively mitigated due to a dominant role of electrostatic repulsion interaction at membrane-oil interface. Compared with conventional and commercial ceramic membranes, our zirconia membrane is the first reported in literature that can effectively reject nano-sized oil droplets (∼18 nm) with over 99% rejection. Moreover, the zirconia membrane has also been challenged with real degreasing wastewater with very high oil content (∼4284 mg L^-1) and pH (∼12.4) and delivered consistently high separation performance over many operation cycles.

Nanofiltration Membranes with Octopus Arm-Sucker Surface Morphology: Filtration Performance and Mechanism Investigation

Precisely tailoring the surface morphology characteristics of the active layers based on bionic inspirations can improve the performance of thin-film composite (TFC) membranes. The remarkable water adsorption and capture abilities of octopus tentacles inspired the construction of a novel TFC nanofiltration (NF) membrane with octopus arm-sucker morphology using carbon nanotubes (CNTs) and beta-cyclodextrin (β-CD) during interfacial polymerization (IP). The surface morphology, chemical elements, water contact angle (WCA), interfacial free energy (ΔG), electronegativity, and pore size of the membranes were systematically investigated. The optimal membrane exhibited an enhanced water permeance of 22.6 L·m^-2·h^-1·bar^-1, 180% better than that of the TFC-control membrane. In addition, the optimal membrane showed improved single salt rejections and monovalent/divalent ion selectivity and can break the trade-off effect. The antiscaling performance and stability of the membranes were further explored. The construction mechanism of the octopus arm-sucker structure was excavated, in which CNTs and β-CD acted as arm skeletons and suckers, respectively. Furthermore, the customization of the membrane surface and performance was achieved through tuning the individual effects of the arm skeletons and suckers. This study highlights the noteworthy potential of the design and construction of the surface morphology of high-performance NF membranes for environmental application.

Stable Zr-Based Metal-Organic Framework Nanoporous Membrane for Efficient Desalination of Hypersaline Water

Treatment of hypersaline waters is a critical environmental challenge. Pervaporation (PV) desalination is a promising technique to address this challenge, but current PV membranes still suffer from challenging issues such as low flux and insufficient stability. Herein, we propose in situ nanoseeding followed by a secondary growth strategy to fabricate a high-quality stable metal-organic framework (MOF) thin membrane (UiO-66) for high-performance pervaporation desalination of hypersaline waters. To address the issue of membrane quality, a TiO₂ nano-interlayer was introduced on coarse mullite substrates to favor the growth of a UiO-66 nanoseed layer, on which a well-intergrown UiO-66 selective membrane layer with thickness as low as 1 μm was finally produced via subsequent secondary growth. The PV separation performance for hypersaline waters was systematically investigated at different salt concentrations, feed temperatures, and long-term operation in different extreme chemical environments. Besides having nearly complete rejection (99.9%), the UiO-66 membrane exhibited high flux (37.4 L·m^-2·h^-1) for hypersaline waters, outperforming current existing zeolite and MOF membranes. The membrane also demonstrated superior long-term operational stability under various harsh environments (hypersaline, hot, and acidic/alkaline feed water) and mild fouling behavior. The rational design proposed in this study is not only applicable for the development of a high-quality UiO-66 membrane enabling harsh hypersaline water treatment but can also be potentially extended to other next-generation nanoporous MOF membranes for more environmental applications.

Mechanisms of the Aggregation of Graphene Oxide at High pH: Roles of Oxidation Debris and Metal Adsorption

In this work, aggregation of graphene oxide (GO) in synthetic surface water at high pH was elaborated, and experimental characterizations and molecular dynamics simulations were employed to uncover the mechanisms. According to previous studies, aggregation of GO is supposed to be impossible at high pH considering the deprotonation of functional groups on GO and the increased electrostatic repulsions. However, significant aggregations and a reversed trend in zeta potential at high pH were observed. One of the mechanisms was that the promoted metal adsorption at high pH can offset the negative charges generated by the deprotonation. Additionally, the stripping of oxidation debris (OD) on GO also contributes to the unexpected trend in the aggregation behavior and zeta potential. GO consists of lightly oxidized functionalized graphene (FG) sheets and highly oxidized OD. Upon the increase of pH and the deprotonation of functional groups on FG and OD, OD was stripped from FG, which decreased the electrostatic repulsions between FG sheets and accelerated the aggregation. The stripped ODs may recombine to FG edges and bridged FG sheets, which also contribute to the aggregation. Upon the stripping of OD and microstructure transformation of FG, FG-water-OD aggregates formed. According to this study, the aggregation of GO was accompanied by deprotonation of functional groups, metal adsorption, and surface property transformation triggered by the stripping of ODs and should be considered during the development of GO-related nanomaterials and the evaluation of its environmental impact.

Fast Reduced Graphene-Based Membranes with High Desalination Performance

Graphene-oxide (GO) membrane with notable ions sieving properties has attracted significant attention for many applications. However, because of the water swelling of GO membrane, the rejection of monovalent metal cations is generally low. In this work, we developed a fast and facile method to fabricate a kind of reduced GO membranes using the thermal treatment method at 160 °C for only one minute, which denoted as fast reduced GO membrane (FRGO). Surprising, the FRGO membrane represents high ion sieving ability and ultrahigh water/ions selectivity, compared with other reduced GO membranes with similar average interlayer spacings, and even superior to most of GO-based membranes reported in literature. Building on these findings, we provide a new light on fabricating of energy- and environment-related high desalination performance of GO-based membranes as well as a new insight into the transport mechanism within 2D laminar nanochannels.