Magnitude of Diffusion- and Transverse Dispersion-Induced Isotope Fractionation of Organic Compounds in Aqueous Systems

Novel extraction methods and compound-specific isotope analysis of methoxychlor in environmental water and aquifer slurry samples

Multi-element compound-specific stable isotope analysis (ME-CSIA) allows monitoring the environmental behavior and transformation of most common and persistent contaminants. Recent advancements in analytical techniques have extended the applicability of ME-CSIA to organic micropollutants, including pesticides. Nevertheless, the application of this methodology remains unexplored concerning harmful insecticides such as methoxychlor, a polar organochlorine pesticide usually detected in soil and groundwater. This study introduces methods for dual carbon and chlorine compound-specific stable isotope analysis (δ13C-CSIA and δ37Cl-CSIA) of both methoxychlor and its metabolite, methoxychlor olefin, with a sensitivity down to 10 and 100 mg/L, and a precision lower than 0.3 and 0.5 ‰ for carbon and chlorine CSIA, respectively. Additionally, three extraction and preconcentration techniques suitable for ME-CSIA of the target pesticides at environmentally relevant concentrations were also developed. Solid-phase extraction (SPE) and liquid-solid extraction (LSE) effectively extracted methoxychlor (107 ± 27 % and 87 ± 13 %, respectively) and its metabolite (91 ± 27 % and 106 ± 14 %, respectively) from water and aquifer slurry samples, respectively, with high accuracy (Δδ13C and Δδ37Cl ≤ ± 1 ‰). Combining CSIA with polar organic chemical integrative samplers (POCISs) for the extraction of methoxychlor and methoxychlor olefin from water samples resulted in insignificant fractionation for POCIS-CSIA (Δδ13C ≤ ± 1 ‰). A relevant sorption of methoxychlor was detected within the polyethersulfones membranes of the POCISs resulting in temporary carbon isotope fractionation depending on the sorbed mass fraction during the first deployment days. This highlights the critical role of the interactions of polar analytes with POCIS sorbents and membranes in the performance of this method. Altogether, this study proposes a proof of concept for ME-CSIA of methoxychlor and its metabolites, opening the door for future investigations of their sources and transformation processes in contaminated sites.

Carbon isotope effects in the sorption of chlorinated ethenes on biochar and activated carbon

As an alternative to activated carbon, biochar is a promising, environmentally friendly sorbent that can be used to remove organic groundwater pollutants, such as chlorinated ethenes (CEs). Stable isotope fractionation in biofilters is used to quantify pollutant degradation and to distinguish degradation from pollutant sorption on e.g. biochar. However, the sorption of CEs on biochar, and the potential abiotic fractionation processes remain to be tested. The sorption process of CEs and ethene on activated carbon and biochar was investigated with regard to the isotope effects for the differentiation from microbial degradation processes. Results from physical and chemical characterization of biochar indicated that biochar feedstock and pyrolysis conditions determined sorption performance depending on the surface chemistry and the pore size distribution of the coarse sorbent particles. The sorption capacity of the activated carbon was significantly higher with highly chlorinated ethenes, but similar to the biochars with low chlorination. Apparent carbon isotope fractionation factors (ε) of +0.1 to -4.4 ‰ were found above measurement uncertainties of GC/IRMS. The extent of isotope enrichment of the 13C bearing isotopologues in the residual aqueous phase (ε < 0) was characteristic for individual pairs of pollutant and sorbent material and could be related to pore-filling processes limited by the micropore size distribution of sorbent materials and the chemical properties of sorbed pollutants. Especially the large isotope fractionation during the sorption of ethene led to the assumption that diffusion processes within the pore matrix of the sorbent particles contributed to the observed isotope effects, but should still be considered a property of sorption. Concluding on the results indicated that sorption processes can have a significant contribution to carbon isotope fractionation in CEs and ethene. These should not be neglected in the evaluation of biofilters for groundwater purification, in which CEs are simultaneously degraded by microbes.

Reactive transport of micropollutants in laboratory aquifers undergoing transient exposure periods

Groundwater quality is of increasing concern due to the ubiquitous occurrence of micropollutant mixtures. Stream-groundwater interactions near agricultural and urban areas represent an important entry pathway of micropollutants into shallow aquifers. Here, we evaluated the biotransformation of a micropollutant mixture (i.e., caffeine, metformin, atrazine, terbutryn, S-metolachlor and metalaxyl) during lateral stream water flow to adjacent groundwater. We used an integrative approach combining concentrations and transformation products (TPs) of the micropollutants, compound-specific isotope analysis (δ¹³C and δ¹⁵N), sequencing of 16S rRNA gene amplicons and reactive transport modeling. Duplicate laboratory aquifers (160 cm × 80 cm × 7 cm) were fed with stream water and subjected over 140 d to three successive periods of micropollutant exposures as pulse-like (6000 μg L^-1) and constant (600 μg L^-1) injections under steady-state conditions. Atrazine, terbutryn, S-metolachlor and metalaxyl persisted in both aquifers during all periods (<10 % attenuation). Metformin attenuation (up to 14 %) was only observed from 90 d onwards, suggesting enhanced degradation over time. In contrast, caffeine dissipated during all injection periods (>90 %), agreeing with fast degradation rates (t_1/2 < 3 d) in parallel microcosm experiments and detection of TPs (theobromine and xanthine). Significant stable carbon isotope fractionation (Δδ¹³C ≥ 6.6 ‰) was observed for caffeine in both aquifers, whereas no enrichment in ¹⁵N occurred. A concentration dependence of caffeine biotransformation in the aquifers was further suggested by model simulations following Michaelis-Menten kinetics. Changes in bacterial community composition reflected long-term bacterial adaptation to micropollutant exposures. Altogether, the use of an integrative approach can help to understand the interplay of subsurface hydrochemistry, bacterial adaptations and micropollutants biotransformation during stream-groundwater interactions.

Phase-specific stable isotope fractionation effects during combined gas-liquid phase exchange and biodegradation

Stable isotope fractionation of toluene under dynamic phase exchange was studied aiming at ascertaining the effects of gas-liquid partitioning and biodegradation of toluene stable isotope composition in liquid-air phase exchange reactors (Laper). The liquid phase consisted of a mixture of aqueous minimal media, a known amount of a mixture of deuterated (toluene-d) and non-deuterated toluene (toluene-h), and bacteria of toluene degrading strain Pseudomonas putida KT2442. During biodegradation experiments, the liquid and air-phase concentrations of both toluene isotopologues were monitored to determine the observable stable isotope fractionation in each phase. The results show a strong fractionation in both phases with apparent enrichment factors beyond -800‰. An offset was observed between enrichment factors in the liquid and the gas phase with gas-phase values showing a stronger fractionation in the gas than in the liquid phase. Numerical simulation and parameter fitting routine was used to challenge hypotheses to explain the unexpected experimental data. The numerical results showed that either a very strong, yet unlikely, fractionation of the phase exchange process or a - so far unreported - direct consumption of gas phase compounds by aqueous phase microorganisms could explain the observed fractionation effects. The observed effect can be of relevance for the analysis of volatile contaminant biodegradation using stable isotope analysis in unsaturated subsurface compartments or other environmental compartment containing a gas and a liquid phase.

Toward Improved Bioremediation Strategies: Response of BAM-Degradation Activity to Concentration and Flow Changes in an Inoculated Bench-Scale Sediment Tank

Compound-specific isotope analysis (CSIA) can reveal mass-transfer limitations during biodegradation of organic pollutants by enabling the detection of masked isotope fractionation. Here, we applied CSIA to monitor the adaptive response of bacterial degradation in inoculated sediment to low contaminant concentrations over time. We characterized Aminobacter sp. MSH1 activity in a flow-through sediment tank in response to a transient supply of elevated 2,6-dichlorobenzamide (BAM) concentrations as a priming strategy and took advantage of an inadvertent intermittence to investigate the effect of short-term flow fluctuations. Priming and flow fluctuations yielded improved biodegradation performance and increased biodegradation capacity, as evaluated from bacterial activity and residual concentration time series. However, changes in isotope ratios in space and over time evidenced that mass transfer became increasingly limiting for degradation of BAM at low concentrations under such stimulated conditions, and that activity decreased further due to bacterial adaptation at low BAM (μg/L) levels. Isotope ratios, in conjunction with residual substrate concentrations, therefore helped identifying underlying limitations of biodegradation in such a stimulated system, offering important insight for future optimization of remediation schemes.

Isotope Effects on the Vaporization of Organic Compounds from an Aqueous Solution-Insight from Experiment and Computations

An isotope fractionation analysis of organic groundwater pollutants can assess the remediation at contaminated sites yet needs to consider physical processes as potentially confounding factors. This study explores the predictability of water–air partitioning isotope effects from experiments and computational predictions for benzene and trimethylamine (both H-bond acceptors) as well as chloroform (H-bond donor). A small, but significant, isotope fractionation of different direction and magnitude was measured with ε = −0.12‰ ± 0.07‰ (benzene), ε_C = 0.49‰ ± 0.23‰ (triethylamine), and ε_H = 1.79‰ ± 0.54‰ (chloroform) demonstrating that effects do not correlate with expected hydrogen-bond functionalities. Computations revealed that the overall isotope effect arises from contributions of different nature and extent: a weakening of intramolecular vibrations in the condensed phase plus additional vibrational modes from a complexation with surrounding water molecules. Subtle changes in benzene contrast with a stronger coupling between intra- and intermolecular modes in the chloroform–water system and a very local vibrational response with few atoms involved in a specific mode of triethylamine. An energy decomposition analysis revealed that each system was affected differently by electrostatics and dispersion, where dispersion was dominant for benzene and electrostatics dominated for chloroform and triethylamine. Interestingly, overall stabilization patterns in all studied systems originated from contributions of dispersion rather than other energy terms.

Mass-Transfer-Limited Biodegradation at Low Concentrations-Evidence from Reactive Transport Modeling of Isotope Profiles in a Bench-Scale Aquifer

Organic contaminant degradation by suspended bacteria in chemostats has shown that isotope fractionation decreases dramatically when pollutant concentrations fall below the (half-saturation) Monod constant. This masked isotope fractionation implies that membrane transfer is slow relative to the enzyme turnover at μg L^-1 substrate levels. Analogous evidence of mass transfer as a bottleneck for biodegradation in aquifer settings, where microbes are attached to the sediment, is lacking. A quasi-two-dimensional flow-through sediment microcosm/tank system enabled us to study the aerobic degradation of 2,6-dichlorobenzamide (BAM), while collecting sufficient samples at the outlet for compound-specific isotope analysis. By feeding an anoxic BAM solution through the center inlet port and dissolved oxygen (DO) above and below, strong transverse concentration cross-gradients of BAM and DO yielded zones of low (μg L^-1) steady-state concentrations. We were able to simulate the profiles of concentrations and isotope ratios of the contaminant plume using a reactive transport model that accounted for a mass-transfer limitation into bacterial cells, where apparent isotope enrichment factors *ε decreased strongly below concentrations around 600 μg/L BAM. For the biodegradation of organic micropollutants, mass transfer into the cell emerges as a bottleneck, specifically at low (μg L^-1) concentrations. Neglecting this effect when interpreting isotope ratios at field sites may lead to a significant underestimation of biodegradation.