Interparticle Delivery and Detection of Volatile Singlet Oxygen at Air/Solid Interfaces

Superhydrophobic Dressing for Singlet Oxygen Delivery in Antimicrobial Photodynamic Therapy against Multidrug-Resistant Bacterial Biofilms

The rise of antimicrobial resistance poses a critical public health threat worldwide. While antimicrobial photodynamic therapy (aPDT) has demonstrated efficacy against multidrug-resistant (MDR) bacteria, its effectiveness can be limited by several factors, including the delivery of the photosensitizer (PS) to the site of interest and the development of bacterial resistance to PS uptake. There is a need for alternative methods, one of which is superhydrophobic antimicrobial photodynamic therapy (SH-aPDT), which we report here. SH-aPDT is a technique that isolates the PS on a superhydrophobic (SH) membrane, generating airborne singlet oxygen (1O2) that can diffuse up to 1 mm away from the membrane. In this study, we developed a SH polydimethylsiloxane dressing coated with PS verteporfin. These dressings contain air channels called a plastron for supplying oxygen for aPDT and are designed so that there is no direct contact of the PS with the tissue. Our investigation focuses on the efficacy of SH-aPDT on biofilms formed by drug-sensitive and MDR strains of Gram-positive (Staphylococcus aureus and S. aureus methicillin-resistant) and Gram-negative bacteria (Pseudomonas aeruginosa and P. aeruginosa carbapenem-resistant). SH-aPDT reduces bacterial biofilms by approximately 3 log with a concomitant decrease in their metabolism as measured by MTT. Additionally, the treatment disrupted extracellular polymeric substances, leading to a decrease in biomass and biofilm thickness. This innovative SH-aPDT approach holds great potential for combating antimicrobial resistance, offering an effective strategy to address the challenges posed by drug-resistant wound infections.

Singlet oxygen generation on a superhydrophobic surface: Effect of photosensitizer coating and incident wavelength on 1O2 yields

Photochemical generation of singlet oxygen (1O2) often relies on homogenous systems; however, a dissolved photosensitizer (PS) may be unsuitable for some applications because it is difficult to recover, expensive to replenish, and hazardous to the environment. Isolation of the PS onto a solid support can overcome these limitations, but implementation faces other challenges, including agglomeration of the solid PS, physical quenching of 1O2 by the support, photooxidation of the PS, and hypoxic environments. Here, we explore a superhydrophobic polydimethylsiloxane (SH-PDMS) support coated with the photosensitizer 5,10,15,20-tetrakis(pentafluorophenyl)-21H,23H-porphyrin (TFPP). This approach seeks to address the challenges of a heterogeneous system by using a support that exhibits low 1O2 physical quenching rates, a fluorinated PS that is chemically resistant to photooxidation, and a superhydrophobic surface that entraps a layer of air, thus preventing hypoxia. Absorbance and fluorescence spectroscopy reveal the monomeric arrangement of TFPP on SH-PDMS surfaces, a surprising but favorable characteristic for a solid-phase PS on 1O2 yields. We also investigated the effect of incident wavelength on 1O2 yields for TFPP in aqueous solution and immobilized on SH-PDMS and found overall yields to be dependent on the absorption coefficient, while the yield per absorbed photon exhibited wavelength independence, in accordance with Kasha-Vavilov's rule.

Truxene-to-Fluorenone Energy Transfer in a Robust Mesoporous Zn-MOF

A new metal-organic framework (MOF; [Zn4O(hett)4/3(fluo)1/2(bdc)1/2]n; TFT-MOF) constructed on chromophoric ligands 5,5',10,10',15,15'-hexaethyltruxene-2,7,12-triacetate (hett), 9-fluorenone-2,7-dicarboxylate (fluo), terephthalate (bdc), and the Zn4O node has been prepared and identified by powder X-ray diffraction. This luminescent MOF exhibits large mesoporous pores of 2.7 nm based on computer modeling using density functional theory (DFT) calculations. The steady-state and time-resolved fluorescence spectra and photophysical parameters of TFT-MOF have been investigated and compared with those of the free ligands and their basic chromophores. All in all, TFT-MOF exhibits particularly efficient singlet-singlet energy-transfer processes described as 1(hett)* → (fluo) and 1(bdc)* → (fluo), leading to fluorescence arising for the fluo lumophore operating only through Förster resonance energy transfer (FRET) with an efficiency of transfer of up to >95%. This experimental conclusion was corroborated by DFT and time-dependent DFT (TDDFT). For the 1(hett)* → (fluo) process, the approximated overall rate constant of energy transfer was evaluated to be at most 2.04 × 1010 s-1 (using a Stern-Volmer approach of solution data and the relationship between distance and concentration). This process was analyzed using the Förster theory, where two intrapore energy transfer paths of center-to-center distances of 13 and 25 Å have been identified. TFT-MOF photosensitizes the formation of singlet oxygen (1O2 (1Σg)) as detected by its phosphorescence signal at 1275 nm.

Tuning the 1O2 Oxidation of a Phenol at the Air/Solid Interface of a Nanoparticle: Hydrophobic Surface Increases Oxophilicity

Although silica surfaces have been used in organic oxidations for the production of peroxides, studies of airborne singlet oxygen at interfaces are limited and have not found widespread advantages. Here, with prenyl phenol-coated silica and delivery of singlet oxygen (¹O₂) through the gas phase, we uncover significant selectivity for dihydrofuran formation over allylic hydroperoxide formation. The hydrophobic particle causes prenyl phenol to produce an iso-hydroperoxide intermediate with an internally protonated oxygen atom, which leads to dihydrofuran formation as well as O atom transfer. In contrast, hydrophilic particles cause prenyl phenol to produce allylic hydroperoxide, due to phenol OH hydrogen bonding with SiOH surface groups. Mechanistic insight is provided by air/nanoparticle interfaces coated with the prenyl phenol, in which product yield was 6-fold greater on the hydrophobic nanoparticles compared to the hydrophilic nanoparticles and total rate constants (ASI-k_T) of ¹O₂ were 13-fold greater on the hydrophobic vs hydrophilic nanoparticles. A slope intersection method was also developed that uses the airborne ¹O₂ lifetime (τ_airborne) and surface-associated ¹O₂ lifetime (τ_surf) to quantitate ¹O₂ transitioning from volatile to non-volatile and surface boundary (surface···¹O₂). Further mechanistic insights on the selectivity of the reaction of prenyl phenol with ¹O₂ was provided by density functional theory calculations.

Singlet Oxygen Seasonality in Aqueous PM10 is Driven by Biomass Burning and Anthropogenic Secondary Organic Aerosol

The first excited state of molecular oxygen is singlet-state oxygen (¹O₂), formed by indirect photochemistry of chromophoric organic matter. To determine whether ¹O₂ can be a competitive atmospheric oxidant, we must first quantify its production in organic aerosols (OA). Here, we report the spatiotemporal distribution of ¹O₂ over a 1-year dataset of PM₁₀ extracts at two locations in Switzerland, representing a rural and suburban site. Using a chemical probe technique, we measured ¹O₂ steady-state concentrations with a seasonality over an order of magnitude peaking in wintertime at 4.59 ± 0.01 × 10^-13 M and with a quantum yield of up to 2%. Next, we identified biomass burning and anthropogenic secondary OA (SOA) as the drivers for ¹O₂ formation in the PM₁₀ aqueous extracts using source apportionment data. Importantly, the quantity, the amount of brown carbon present in PM₁₀, and the quality, the chemical composition of the brown carbon present, influence the concentration of ¹O₂ sensitized in each extract. Anthropogenic SOA in the extracts were 4 times more efficient in sensitizing ¹O₂ than primary biomass burning aerosols. Last, we developed an empirical fit to estimate ¹O₂ concentrations based on PM₁₀ components, unlocking the ability to estimate ¹O₂ from existing source apportionment data. Overall, ¹O₂ is likely a competitive photo-oxidant in PM₁₀ since ¹O₂ is sensitized by ubiquitous biomass burning OA and anthropogenic SOA.

Sensitized Photooxidation of Ortho-prenyl Phenol: Biomimetic Dihydrobenzofuran Synthesis and Total 1 O2 Quenching

The sensitized photooxidation of ortho-prenyl phenol is described with evidence that solvent aproticity favors the formation of a dihydrobenzofuran [2-(prop-1-en-2-yl)-2,3-dihydrobenzofuran], a moiety commonly found in natural products. Benzene solvent increased the total quenching rate constant (k_T ) of singlet oxygen with prenyl phenol by ~10-fold compared to methanol. A mechanism is proposed with preferential addition of singlet oxygen addition to prenyl site due to hydrogen bonding with phenol OH group, which causes a divergence away from the singlet oxygen 'ene' reaction toward the dihydrobenzofuran as the major product. The reaction is a mixed photooxidized system since an epoxide arises by a type I sensitized photooxidation.

Probing the Transition State-to-Intermediate Continuum: Mechanistic Distinction between a Dry versus Wet Perepoxide in the Singlet Oxygen "Ene" Reaction at the Air-Water Interface

A mechanistic study is reported for the reactions of singlet oxygen (¹O₂) with alkene surfactants of tunable properties. Singlet oxygen was generated either top-down (photochemically) by delivery as a gas to an air-water interface or bottom-up (chemically) by transport to the air-water interface as a solvated species. In both cases, reactions were carried out in the presence of 7-carbon (7C), 9-carbon (9C), or 11-carbon (11C) prenylsurfactants [(CH₃)₂C═CH(CH₂)_nSO₃^- Na⁺ (n = 4, 6, 8)]. Higher "ene" hydroperoxide regioselectivities (secondary ROOH 2 to tertiary ROOH 3) were reached in delivering ¹O₂ top-down through air as compared to bottom-up via aqueous solution. In the photochemical reaction, ratios of 2:3 increased from 2.5:1 for 7C, to 2.8:1 for 9C, and to 3.2:1 for 11C. In contrast, in the bubbling system that generated ¹O₂ chemically, the selectivity was all but lost, ranging only from 1.3:1 to 1:1. The phase-dependent regioselectivities appear to be correlated with the "ene" reaction with photochemically generated, drier ¹O₂ at the air-water interface vs those with wetter ¹O₂ from the bubbling reactor. Density functional theory-calculated reaction potential energy surfaces (PESs) were used to help rationalize the reaction phase dependence. The reactions in the gas phase are mediated by perepoxide transition states with 32-41 kJ/mol binding energy for C═C(π)···¹O₂. The perepoxide species, however, evolve to well-defined stationary structures in the aqueous phase, with covalent C-O bonds and 85-88 kJ/mol binding energy. The combined experimental and computational evidence points to a unique mechanism for ¹O₂ "ene" tunability in a perepoxide continuum from a transition state to an intermediate.

Potentiation Effect of Iodine Species on the Antimicrobial Capability of Surfaces Coated with Electroactive Phthalocyanines

The spreading of different infections can occur through direct contact with glass surfaces in commonly used areas. Incorporating the use of alternative therapies in these materials seems essential to reduce and also avoid bacterial resistance. In this work, the capability to kill microbes of glass surfaces coated with two electroactive metalated phthalocyanines (ZnPc-EDOT and CuPc-EDOT) is assessed. The results show that both of these materials are capable of producing reactive oxygen species; however, the polymer with Zn(II) (ZnPc-PEDOT) has a singlet oxygen quantum yield 8-fold higher than that of the Cu(II) containing analogue. This was reflected in the in vitro experiments where the effectiveness of the surfaces was tested in bacterial suspensions, monitoring single microbe inactivation upon attachment to the polymers, and eliminating mature biofilms. Furthermore, we evaluated the use of an inorganic salt (KI) to potentiate the photodynamic inactivation mediated by an electropolymerized surface. The addition of the salt improved the efficiency of phototherapy at least two times for both polymers; nevertheless, the material coated with ZnPc-PEDOT was the only one capable of eliminating >99.98% of the initial microbes loading under different circumstances.

Antimicrobial Photodynamic Inactivation Using Topical and Superhydrophobic Sensitizer Techniques: A Perspective from Diffusion in Biofilms†

This review describes nanoparticle and dye diffusion in bacterial biofilms in the context of antimicrobial photodynamic inactivation (aPDI). aPDI requires the diffusion of a photosensitizer (Sens) into the biofilm and subsequent photoactivation of oxygen for the generation of reactive oxygen species (ROS) that inactivate microbes. Molecular diffusion in biofilms has been long investigated, whereas this review is intended to draw a logical link between diffusion in biofilms and ROS, a combination that leads to the current state of aPDI and superhydrophobic aPDI (SH-aPDI). This review should be of interest to photochemists, photobiologists and researchers in material and antimicrobial sciences as is ties together conventional aPDI with the emerging subject of SH-aPDI.