Brown Carbon in Primary and Aged Coal Combustion Emission

Emission and optical characteristics of brown carbon in size-segregated particles from three types of Chinese ships

Brown carbon (BrC) is one of the important light absorption substances that have high light absorption ability under short wavelength light. However, limit studies have focused on the BrC emission from ships. In this study, size-segregated particulate matters (PM) were collected from three different types of ships, light absorption characteristics and size distribution of methanol-soluble BrC and water-soluble BrC in PM from ship exhausts were investigated. Results showed that four-stroke low-power diesel fishing boat (4-LDF) had the highest mass concentrations of methanol-soluble organic carbon (MSOC) and water-soluble organic carbon (WSOC), followed by 2-stroke high-power heavy-fuel-oil vessel (2-HHV), and four-stroke high-power marine-diesel vessel (4-HMV). While 2-HHV had obviously higher light absorption coefficients of methanol-soluble BrC (Abs365,M) and water-soluble BrC (Abs365,W) in unit weight of PM than the other two types of ships. The tested ships presented comparable or higher absorption efficiency of BrC in water extracts (MAE365,W) compared with other BrC emission sources. Majority of BrC was concentrated in fine particles, and the particle size distributions of both Abs365,M and Abs365,W showed bimodal patterns, peaking at 0.43-0.65 µm and 4.7-5.8 µm, respectively. However, different particle size distributions were found for MAE365,M between diesel and heavy fuel oil ships. Besides, different wavelength dependence in particles with different size were also detected. Ship exhaust could be confirmed as a non-ignorable BrC emission source, and complex influencing factor could affect the light absorption characteristics of ship emissions. Particle size should also be considered when light absorption ability of BrC was evaluated.

Photochemical evolution of the molecular composition of dissolved organic carbon and dissolved brown carbon from wood smoldering

Recently, extreme wildfires occur frequently around the world and emit substantial brown carbon (BrC) into the atmosphere, whereas the molecular compositions and photochemical evolution of BrC remain poorly understood. In this work, primary smoke aerosols were generated from wood smoldering, and secondary smoke aerosols were formed by the OH radical photooxidation in an oxidation flow reactor, where both primary and secondary smoke samples were collected on filters. After solvent extraction of filter samples, the molecular composition of dissolved organic carbon (DOC) was determined by Fourier transform ion cyclotron resonance mass spectrometry (FTICR MS). The molecular composition of dissolved BrC was obtained based on the constraints of DOC formulae. The proportion of dissolved BrC fractions accounted for approximately 1/3-1/2 molecular formulae of DOC. The molecular characteristics of dissolved BrC showed higher levels of carbon oxidation state, double bond equivalents, and modified aromaticity index than those of DOC, indicating that dissolved BrC fractions were a class of organic structures with relatively higher oxidation state, unsaturated and aromatic degree in DOC fractions. The comparative analysis suggested that aliphatic and olefinic structures dominated DOC fractions (contributing to 70.1%-76.9%), while olefinic, aromatic, and condensed aromatic structures dominated dissolved BrC fractions (contributing to 97.5%-99.9%). It is worth noting that dissolved BrC fractions only contained carboxylic-rich alicyclic molecules (CRAMs)-like structures, unsaturated hydrocarbons, aromatic structures, and highly oxygenated compounds. CRAMs-like structures were the most abundant species in both DOC and dissolved BrC fractions. Nevertheless, the specific molecular characteristics for DOC and dissolved BrC fractions varied with subgroups after aging. The results highlight the similarities and differences in the molecular compositions and characteristics of DOC and dissolved BrC fractions with aging. This work will provide insights into understanding the molecular composition of DOC and dissolved BrC in smoke.

Water-soluble brown carbon in atmospheric aerosols from the resource-dependent cities: Optical properties, chemical compositions and sources

As a vital type of light-absorbing aerosol, brown carbon (BrC) presents inherent associations with atmospheric photochemistry and climate change. However, the understanding of the chemical and optical properties of BrC is limited, especially in some resource-dependent cities with long heating periods in northwest China. This study showed that the annual average abundances of Water-soluble BrC (WS-BrC) were 9.33±7.42 and 8.69±6.29 µg/m3 in Baotou and Wuhai and the concentrations, absorption coefficient (Abs365), and mass absorption efficiency (MAE365) of WS-BrC presented significant seasonal patterns, with high values in the heating season and low values in the non-heating season; while showing opposite seasonal trends for the Absorption Ångström exponent (AAE300-400). Comparatively, the levels of WS-BrC in developing regions (such as cities in Asia) were higher than those in developed regions (such as cities in Europe and Australia), indicating the significant differences in energy consumption in these regions. By combining fluorescence excitation-emission matrix (EEM) spectra with the parallel factor (PARAFAC) model, humic-like (C1 and C2) and protein-like (C3) substances were identified, and accounted for 61.40%±4.66% and 38.6%±3.78% at Baotou, and 60.33%±6.29% and 39.67%±4.17% at Wuhai, respectively. The results of source apportionment suggested that the potential source regions of WS-BrC varied in heating vs. non-heating seasons and that the properties of WS-BrC significantly depended on primary emissions (e.g., combustion emissions) and secondary formation.

Insight into the Role of NH3/NH4+ and NOx/NO3- in the Formation of Nitrogen-Containing Brown Carbon in Chinese Megacities

Particulate brown carbon (BrC) plays a crucial role in the global radiative balance due to its ability to absorb light. However, the effect of molecular formation on the light absorption properties of BrC remains poorly understood. In this study, atmospheric BrC samples collected from six Chinese megacities in winter and summer were characterized through ultrahigh-performance liquid chromatography coupled with Orbitrap mass spectrometry (UHPLC-Orbitrap MS) and light absorption measurements. The average values of BrC light absorption coefficient at a wavelength of 365 nm (babs365) in winter were approximately 4.0 times higher than those in summer. Nitrogen-containing organic molecules (CHNO) were identified as critical components of light-absorbing substances in both seasons, underscoring the importance of N-addition in BrC. These nitrogen-containing BrC chromophores were more closely related to nitro-containing compounds originating from biomass burning and nitrogen oxides (NOx)/nitrate (NO3-) reactions in winter. In summer, they were related to reduced N-containing compounds formed in ammonia (NH3)/ammonium (NH4+) reactions. The NH3/NH4+-mediated reactions contributed more to secondary BrC in summer than winter, particularly in southern cities. Compared with winter, the higher O/Cw, lower molecule conjugation indicator (double bond equivalent, DBE), and reduced BrC babs365 in summer suggest a possible bleaching mechanism during the oxidation process. These findings strengthen the connection between molecular composition and the light-absorbing properties of BrC, providing insights into the formation mechanisms of BrC chromophores across northern and southern Chinese cities in different seasons.

Broadband spectrum characteristics and radiative effects of primary brown carbon from wood pyrolysis

Brown carbon (BrC), known as light-absorbing organic aerosol in the near-ultraviolet (UV) and short visible region, plays a significant role in the global and regional climate change. A detailed understanding of the spectral optical properties of BrC is beneficial for reducing the uncertainty in radiative forcing calculation. In this work, the spectral properties of primary BrC were investigated by using a four-wavelength broadband cavity-enhanced albedometer with central wavelengths at 365, 405, 532 and 660 nm. The BrC samples were generated by the pyrolysis of three types of wood. During the pyrolysis process, the measured average single scattering albedo (SSA) at 365 nm was about 0.66 to 0.86, where the average absorption Ångström exponent (AAE) was between 5.8 and 7.8, and the average extinction Ångström exponent (EAE) was within 2.1 to 3.5. The full spectral measurement of SSA (300-700 nm) was realized by an optical retrieval method and the retrieved SSA spectrum was directly applied to evaluate aerosol direct radiative forcing (DRF) efficiency. The DRF efficiency over ground of various primary BrC emissions increased from 5.3 % to 68 % as compared to the non-absorbing organic aerosol assumption. A decrease of about 35 % in SSA would cause the DRF efficiency over ground to change from cooling effect to warming effect (from -0.33 W/m² to +0.15 W/m²) in the near-UV band (365-405 nm). The DRF efficiency over ground of strongly absorptive primary BrC (lower SSA) contributed 66 % more than weakly absorptive primary BrC (higher SSA). These findings proved the importance of broadband spectral properties of BrC, which are substantial for radiative forcing evaluation of BrC and should be considered in global climate models.

Significant coal combustion contribution to water-soluble brown carbon during winter in Xingtai, China: Optical properties and sources

To understand the characteristics of atmospheric brown carbon (BrC), daily PM_2.5 samples in Xingtai, a small city in North China Plain (NCP), during the four seasons of 2018-2019, were collected and analyzed for optical properties and chemical compositions. The light absorption at 365 nm (abs_{λ=365 nm}) displayed a strong seasonal variation with the highest value in winter (29.0±14.3 M/m), which was 3.2∼5.4-fold of that in other seasons. A strong correlation of abs_{λ=365 nm} with benzo(b)fluoranthene (BbF) was only observed in winter, indicating that coal combustion was the major source for BrC in the season due to the enhanced domestic heating. The mass absorbing efficiency of BrC also exhibited a similar seasonal pattern, and was found to correlate linearly with the aerosol pH, suggesting a positive effect of aerosol acidity on the optical properties and formation of BrC in the city. Positive matrix factorization (PMF) analysis further showed that on a yearly basis the major source for BrC was biomass burning, which accounted for 34% of the total BrC, followed by secondary formation (26.7%), coal combustion (21.3%) and fugitive dust (18%). However, the contribution from coal combustion was remarkably enhanced in winter, accounting for ∼40% of the total. Our work revealed that more efforts of "shifting coal to clean energy" are necessary in rural areas and small cities in NCP in order to further mitigate PM_2.5 pollution in China.

Significant emission reductions of carbonaceous aerosols from residential coal burning by a novel stove

Carbonaceous aerosols (CA) are crucial components in the atmospheric PM_2.5 and derived from diverse sources. One of the major sources for CA is from the incomplete combustion of bituminous coal that has been prevailingly used by household stoves in rural areas for heating during winter. To efficiently eliminate the CA emission, a new household stove (NHS) was developed based on a novel combustion technology and CA emissions from the NHS and a traditional household stove (THS) were comparably investigated under the actual stove operation conditions in a farmer's house. Compared with the THS, the emission factors of organic carbon (OC), elemental carbon (EC), and water-soluble organic carbon (WSOC) from the NHS were reduced by 96%±1%, 98%±1%, and 91%±1% under the flaming process and 95%±1%, 96%±2%, and 83%±4% under the smoldering process, respectively. Additionally, the mass absorption efficiency of WSOC from the NHS reduced by 3 folds and the radiative forcing by WSOC relative to EC shrank remarkably by a factor of 3-8. Based on the reduction of emissions and light absorption of WSOC, the promotion of the NHS offers a possible solution to achieve the clean combustion of residential solid fuel.

Connecting the Light Absorption of Atmospheric Organic Aerosols with Oxidation State and Polarity

The light-absorbing organic aerosol (OA) constitutes an important fraction of absorbing components, counteracting major cooling effect of aerosols to climate. The mechanisms in linking the complex and changeable chemistry of OA with its absorbing properties remain to be elucidated. Here, by using solvent extraction, ambient OA from an urban environment was fractionated according to polarity, which was further nebulized and online characterized with compositions and absorbing properties. Water extracted high-polar compounds with a significantly higher oxygen to carbon ratio (O/C) than methanol extracts. A transition O/C of about 0.6 was found, below and above which the enhancement and reduction of OA absorptivity were observed with increasing O/C, occurring on the less polar and high polar compounds, respectively. In particular, the co-increase of nitrogen and oxygen elements suggests the important role of nitrogen-containing functional groups in enhancing the absorptivity of the less polar compounds (e.g., forming nitrogen-containing aromatics), while further oxidation (O/C > 0.6) on high-polar compounds likely led to fragmentation and bleaching chromophores. The results here may reconcile the previous observations about darkening or whitening chromophores of brown carbon, and the parametrization of O/C has the potential to link the changing chemistry of OA with its polarity and absorbing properties.

Rapid transition of aerosol optical properties and water-soluble organic aerosols in cold season in Fenwei Plain

The Fenwei Plain (FWP) continues to be one of the most polluted regions in China despite the improvement of air quality in recent years. However, our understanding of aerosol optical properties (AOP) and its relationship with aerosol composition particularly in cold season is far from complete. Here we conducted three-month measurements of AOP from November 2020 to January 2021 in the FWP along with fine particle composition and water-soluble organic aerosol (WSOA) measurements. Our results showed rapid transitions in AOP from November to January due to the enhanced primary emissions and the decreased aqueous-phase processing. The single scattering albedo (SSA) decreased from 0.85 to 0.78, while the absorption Ångstrӧm exponent (AAE) increased from 1.41 to 1.60, demonstrating the increasing role of absorbing aerosol and brown carbon in cold season. Further analysis showed that SSA increased significantly with the fraction of secondary inorganic aerosol, while AAE was highly correlated with the fraction of primary OA (POA), highlighting the different impacts of primary and secondary aerosol on AOP. Chemical apportionment showed the dominant contributions of ammonium nitrate (29%) and ammonium sulfate (27%) to particle extinction before heating season, while that of POA increased to 27% during heating season. Although the pollution level showed a clear increase during the heating season, the changes in visibility were small due to the decreased mass extinction efficiency from 3.48 to 2.91 m² g^-1. Positive matrix factorization illustrated a clear transition in WSOA composition from the dominance of secondary OA (SOA) in November to POA in heating season. Compared with the large decrease in water-soluble aqueous-phase SOA, the consistently high concentration of photochemical-related SOA elucidated the presence of strong photochemical processing in cold season. Overall, our results demonstrate the significant transition in primary emissions and secondary formation in cold season, and such changes have affected AOP substantially.

Source profiles of molecular structure and light absorption of PM2.5 brown carbon from residential coal combustion emission in Northwestern China

Residential coal combustion is a prominent source of brown carbon (BrC) aerosols, but knowledge of their molecular structures and optical absorption were limited, which have notable used in ambient BrC source identification and radiative forcing calculation. In this study, the Fourier transform-ion cyclotron resonance mass spectrometry combined with partial least squares regression analysis as well as Fourier transform infrared spectroscopy analysis were used to insight the molecular compounds and structures of BrC from anthracite and bituminous coal combustions between traditional and improved stoves. The absorption Ångström exponents (AAE) and mass absorption efficiency (MAE) values for the BrC emitted from the combinations of bituminous were both 1.2-2.5 times lower than those of anthracite, interpreting that the BrC from the anthracite emissions had greater light-absorbing capacity. In contrast, the emission factor of light absorption (EF_Abs) at 365 nm for the bituminous coal combusted in the traditional stove was the highest among all the tested scenarios, which revealed that the incomplete combustion of bituminous coal could emit more BrC. It was noted that primary BrC emitted from the coal combustion with traditional stoves contains higher aromaticity groups of C-C and C＝O and higher S containing organics, whereas more aliphatic groups were found in BrC using the improved stoves. N-containing (CHON and CHONS) compounds were dominated in the total molecular formula of BrC, whereas the sum of CHON and CHO groups had high double-bond equivalent (DBE) values contributed 53.5%-87.1% to the total BrC absorption. Moreover, for CHOS, the lowest of estimated molecular absorption, DBE, and DBE/C should attribute to the non-chromophoric or weak absorptive S-containing compounds. This study supplied an effective evaluation method to compare BrC emissions and their absorption for coal combustion on regional scale.

Hourly emission estimation of black carbon and brown carbon absorption from domestic coal burning in China

Residential coal combustion (RCC) emission demonstrates obvious daily variation, while no real-time estimation of air pollutants from RCC has been reported, as the limitation of hourly activity data and emission factors. With a dilution sampling system, a high-precision electronic balance, and an Aethalometer Model AE33, a real-time monitoring platform for RCC emission was established. Hourly emission factors (EFs) of BC and absorption emission factors (AEFs) of BrC from eleven kinds of chunk coals and nine kinds of honeycomb coals burning in China were obtained. The monthly and hourly coal consumption amounts were calculated with the activity data from literature reviews and a field survey. The first hourly BC and absorption cross section of BrC emission inventories from RCC were established in China. The historical emission trends (2003-2017) indicated that the policy has rapidly controlled the emission of BC and ACS_BrC from RCC in urban area (26.7% and 31.8% decreased, respectively in 2013). While in rural areas, their emission continually increased by 1.2% ~ 5.3% until more strict law enacted in 2017. Emissions of BC and ACS_BrC in winter seasons were 60.1 Gg and 1064.1 Gm², which accounted for 54.3% and 55.1% of the total BC and ACS_BrC emissions correspondingly. The peak values of hourly emission of BC and ACS_BrC (in 370 nm) normally appeared at 19:00-23:00, accounting for 43.0% and 41.5% of their total daily emission. The low emission periods were at cooking times including 7:00, 12:00, and 17:00 of a day and the whole emission of BC and ACS_BrC for the three periods accounted for 1.8% and 2.3% of their daily emission. This high-resolution BC and ACS_BrC emission inventories can be useful for future modeling works on the formation and evolution of a haze event, the smoke aging and transportation, as well as corresponding climate and human health effects.

Concentration, optical characteristics, and emission factors of brown carbon emitted by on-road vehicles

Atmospheric brown carbon (BrC) is a light-absorbing component that affects radiative forcing; however, this effect requires further clarification, particularly with respect to BrC emission sources, chromophores, and optical properties. In the present study, the concentrations, optical properties, and emission factors of organic carbon (OC), water-soluble OC (WSOC), and humic-like substances (HULIS) in fine particulate matter (PM_2.5) emitted from vehicles in three road tunnels (the Wucun, Xianyue, and Wenxing tunnels in Xiamen, China) were investigated. The mass concentrations and light absorption of OC, WSOC, and HULIS were higher at the exits of each tunnel than at entrances, demonstrating that vehicle emissions were a BrC source. At each tunnel's exit, the average light absorption contributed by HULIS-BrC to water-soluble BrC (WS-BrC) and total BrC at 365 nm was higher than the corresponding carbon mass concentration contributed by HULIS (HULIS-C) to WSOC and OC, indicating that the chromophores of HULIS emitted from vehicles had a disproportionately high effect on the light absorption characteristics of BrC. The emission factors (EFs) of HULIS-C and WSOC mass concentrations were highest at the Xianyue tunnel; however, the EFs of HULIS-BrC and WS-BrC light absorption were highest at the Wenxing tunnel, indicating that the chromophore composition of BrC was different among the tunnels and that the mass concentration EFs did not correspond directly to the light absorption EFs.

Primary nature of brown carbon absorption in a frigid atmosphere with strong haze chemistry

Severe haze hovered over Harbin during the heating season of 2019-2020, making it one of the ten most polluted Chinese cities in January of 2020. Here we focused on the optical properties and sources of brown carbon (BrC) during the extreme atmospheric pollution periods. Enhanced formation of secondary BrC (BrC_sec) was evident as relative humidity (RH) became higher, accompanied with a decrease of ozone but concurrent increases of aerosol water content and secondary inorganic aerosols. These features were generally similar to the characteristics of haze chemistry observed during winter haze events in the North China Plain, and indicated that heterogeneous reactions involving aerosol water might be at play in the formation of BrC_sec, despite the low temperatures in Harbin. Although BrC_sec accounted for a substantial fraction of brown carbon mass, its contribution to BrC absorption was much smaller (6 vs. 28%), pointing to a lower mass absorption efficiency (MAE) of BrC_sec compared to primary BrC. In addition, emissions of biomass burning BrC (BrC_BB) were inferred to increase with increasing RH, coinciding with a large drop of temperature. Since both the less absorbing BrC_sec and the more absorbing BrC_BB increased as RH became higher, the MAE of total BrC were largely unchanged throughout the measurement period. This study unfolded the contrast in the source apportionment results of BrC mass and absorption, and could have implications for the simulation of radiative forcing by brown carbon.

Unexpected molecular diversity of brown carbon formed by Maillard-like reactions in aqueous aerosols

Atmospheric brown carbon (BrC) exerts a key impact on the global radiative balance due to its light-absorbing properties. Maillard-like reactions between carbonyl and amino compounds have been identified as an important pathway for forming secondary BrC. Although optical properties have been widely studied, the molecular composition of secondary BrC generated in Maillard chemistry remains unclear, resulting in a knowledge gap to understand its formation and light-absorbing mechanism. In this study, a combination of optical spectroscopy, ¹H nuclear magnetic resonance (NMR), and Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) was employed to comprehensively characterize the chemical and light-absorbing characteristics of secondary BrC. The results indicate that both the light-absorbing and molecular characteristics of secondary BrC were highly related to the structures of their precursors. Organic amine precursors consistently result in enhanced light-absorbing capacities of BrC compared to ammonium, but have inconsistent effects on the molecular diversity of BrC. Compared to amino precursors (i.e., glycine, ethylamine, propylamine, and ammonium), carbonyl precursors play a more important role in determining the molecular diversity of BrC. Different from black carbon, the light-absorbing products from Maillard-like reactions are mainly nitrogen-containing heterocycles. Unexpectedly, 35–64% of molecular formulae detected in real atmospheric samples were found in simulated Maillard reaction products, implying a potentially important contribution of Maillard chemistry to the atmospheric organic molecular pool. These results will improve our understanding of the formation and molecular diversity of BrC, and further help to manage emissions of secondary aerosol precursors.

We found unexpected molecular diversity of brown carbon formed by Maillard-like reactions in aqueous aerosols, and carbonyl precursors play a more important role in determining the molecular diversity of brown carbon.