In Situ-Formed Phenoxyl Radical on the CuO Surface Triggers Efficient Persulfate Activation for Phenol Degradation

Persulfate activation by nanoscale zero-valent iron supported by modified blast furnace slag for degradation of phenol wastewater

Nano-zero valent iron (nZVI) was anchored and dispersed on the surface of acid-modified blast furnace slag (mBFS) through the liquid phase reduction method. The synthesized nZVI@mBFS composite exhibited remarkable ability to degrade phenol when used in conjunction with persulfate (PDS), 97.8% phenol could be eliminated in 30 min. All the anions like SO42-, HCO3-, H2PO4-, and CO32- were detrimental to the phenol degradation in nZVI@mBFS system. Moreover, electron paramagnetic resonance (EPR) analysis and radical scavenging tests confirmed that SO4•-, •OH and •O2- were the principal reactive oxygen species (ROSs) generated during the reaction process. The potential degradation pathways were also deduced based on the results obtained from gas chromatograph-mass spectrometer (GC-MS) analysis. Collectively, this study holds substantial significance in regards to recycling industrial solid wastes, devising efficient persulfate-activated materials, and treating wastewater.

A new perspective on contaminants as "activators": Aromatic amine groups promoted degradation of tetracycline by ferrate(VI)

Occasionally, our group found that the degradation of tetracycline by ferrate(VI) could be promoted by four co-exist contaminants, containing aromatic amines (ofloxacin, diatrizoic acid, sulfadiazine and alachlor). This study investigated the promotion of aromatic amine groups on tetracycline degradation by ferrate(VI) by using aniline as a model compound. The results implied that the presence of aniline increased the degradation rate of tetracycline by 2.76 times, and the enhancement was weakened gradually with the decrease of pH from 10 to 7.5. The generation of Fe(IV) and·OH by the reaction between ferrate(VI) and aniline was proposed to enhance the degradation of tetracycline, supported by quenching experiments, electron paramagnetic resonance (EPR) and theoretical calculations. A positive correlation was found between the rate constant of tetracycline degradation and the electron-donating ability of the substituted amines (quantified by the Hammett substituent constants). In addition, the degradation of tetracycline was remarkably inhibited by HA and some inorganic ions such as NO3-, SO42-, Cl-, Ca2+, and Mg2+, and the inhibition also happened in the Songhua River water and the secondary effluent. The present study provided an insight into the complex oxidation process for the degradation of micropollutants containing aromatic amine by ferrate in water treatment.

Sludge-derived hydrochar modulates complete nonradical electron transfer in peroxydisulfate activation via pyrrolic-N and carbon defect: Implication for degrading electron-rich ionizable anilines compounds

Nonradical electron transfer process (ETP) is a promising pathway for pollutant degradation in peroxydisulfate-based advanced oxidation processes (PDS-AOPs). However, there is a critical bottleneck to trigger ETP by sludge-derived hydrochar due to its negatively charged surface, inferior porosity and electrical conductivity. Herein, pyrrolic-N doped and carbon defected sludge-derived hydrochar (SDHC-N) was constructed for PDS activation to degrade anilines ionizable organic compounds (IOC) through complete nonradical ETP oxidation. Degradation of anilines IOC was not only affected by the electron-donating capacity but also proton concentration in solution because of the ionizable amino group (-NH2). Diverse effects including proton favor, insusceptible and inhibition were observed. Impressively, addition of HCO3 with strong proton binding capacity boosted aniline degradation nearly 10 times. Moreover, characterizations and theoretical calculations demonstrated that pyrrolic-N increased electron density and created positively charged surface, profoundly promoting generation of SDHC-N-S2O82-* complexes. More delocalized electrons around carbon defect could enhance electron mobility. This work guides a rational design of sludge-derived hydrochar to mediate nonradical ETP oxidation, and provides insights into the impacts of proton on anilines IOC degradation.

Ultrafine CuO/graphene oxide cellulose nanocomposites with complementary framework for polycyclic aromatic hydrocarbon pollutants removal

Efficient and sustainable methods for eliminating polycyclic aromatic hydrocarbon pollutants (PAHPs) are in highly desired. Proven technologies involve physical and chemical reactions that absorb PAHPs, however they encounter formidable challenges. Here, a bottom-up refining-grain strategy is proposed to rationally design ultrafine CuO/graphene oxide-cellulose nanocomposites (LCelCCu) with a mirror-like for tetracycline (TC) to substantially improve the efficient of the purification process by active integrated-sorption. The LCelCCu captures TC with a higher affinity and lower energy demand, as determined by sorption kinetic, isotherms, thermodynamics, and infrared and X-ray Photoelectron Spectroscopy. The resulting material could achieve ultra-high sorption capacity (2775.23 mg/g), kinetic (1.2499 L g-1 h-1) and high selectivity (up to 99.9 %) for TC, nearly surpassing all recent adsorbents. This study simultaneously unveils the pioneering role of simultaneous multi-site match sorption and subsequent advanced oxidation synergistically, fundamentally enhancing understanding of the structure-activity-selectivity relationship and inspires more sustainable water purification applications and broader material design considerations.

Nanoconfinement steers nonradical pathway transition in single atom fenton-like catalysis for improving oxidant utilization

The introduction of single-atom catalysts (SACs) into Fenton-like oxidation promises ultrafast water pollutant elimination, but the limited access to pollutants and oxidant by surface catalytic sites and the intensive oxidant consumption still severely restrict the decontamination performance. While nanoconfinement of SACs allows drastically enhanced decontamination reaction kinetics, the detailed regulatory mechanisms remain elusive. Here, we unveil that, apart from local enrichment of reactants, the catalytic pathway shift is also an important cause for the reactivity enhancement of nanoconfined SACs. The surface electronic structure of cobalt site is altered by confining it within the nanopores of mesostructured silica particles, which triggers a fundamental transition from singlet oxygen to electron transfer pathway for 4-chlorophenol oxidation. The changed pathway and accelerated interfacial mass transfer render the nanoconfined system up to 34.7-fold higher pollutant degradation rate and drastically raised peroxymonosulfate utilization efficiency (from 61.8% to 96.6%) relative to the unconfined control. It also demonstrates superior reactivity for the degradation of other electron-rich phenolic compounds, good environment robustness, and high stability for treating real lake water. Our findings deepen the knowledge of nanoconfined catalysis and may inspire innovations in low-carbon water purification technologies and other heterogeneous catalytic applications.

Hydrogel immobilized bacteria@MOFs composite towards Bisphenol A degradation and the interconnection mechanism elucidation

Bisphenol A (BPA) degradation efficiency by bacteria or by metal-organic-frameworks (MOFs) catalyzed persulfate (PMS) oxidation have been studied intensively. However, their synergistic effect on BPA degradation was less reported. In this study, we combined previously synthesized CNT-hemin/Mn-MOF with an BPA degrading bacteria SQ-2 to form a composite (SQ-2@MOFs). CNT-hemin/Mn-MOF in the composite catalyzed little PMS to promote the degradation efficiency of SQ-2 on BPA. Results indicated SQ-2@MOFs significantly accelerated BPA degradation rate than SQ-2 alone. Furthermore, SQ-2@MOFs composite was successfully immobilized in hydrogel to achieve better degradation performance. Immobilized SQ-2@MOFs could almost completely degrade 1-20 mg/L BPA within 24 h and completely degrade 5 mg/L BPA at pH 4-8. Besides, degradation byproducts also reduced by immobilized SQ-2@MOFs, which promoted the cleaner biodegradation of BPA. Metabolomics and multiple chemical characterization results revealed the interconnection mechanism between CNT-hemin/Mn-MOFs, SQ-2 and hydrogel. CNT-hemin/Mn-MOF helped SQ-2 degrade BPA into more biodegradable products, promoted electron transfer, and augmented BPA degradation ability of SQ-2 itself. SQ-2 enabled the surface electronegativity of SQ-2@MOFs more suitable for BPA contact. Meanwhile, SQ-2 avoided the loss of Fe and Mn of CNT-hemin/Mn-MOF. Hydrogel augmented the above synergistic effect. This study provided new perspective for the development of biodegradation materials through interdisciplinary integration.

Low energy consumption pathway to improve sulfamethoxazole degradation by carbon fiber@Fe3O4-CuO: Electrocatalysis activity, mechanism and toxicity

Catalysts play a pivotal role in advanced oxidation processes for the remediation of organic wastewater. In this study, a 3D carbon fiber@Fe3O4-CuO catalyst was fabricated, and its efficacy for persulfate activation to remove sulfamethoxazole (SMX) was investigated at extremely low current density. The results of characterization revealed that the catalyst was uniformly distributed on the carbon fiber, and the loaded catalyst was Fe3O4-CuO nanoparticles with a diameter range of 20-50 nm. The SMX removal rate was significantly enhanced at extremely low current density by the metallic oxide catalyst loaded on carbon fiber. Approximately 90 % of SMX was degraded within 90 min when the electric current density was set at 0.1 mA cm-2. This modification process not only improved the persulfate activation efficiency but also enhanced the generation of hydrogen peroxide. Both radical and non-radical pathways were involved in the degradation of SMX. The degradation pathway mainly included hydroxylation, carboxylation, aniline cleavage, and desulfonation reactions. The quantitative structure-activity relationship model indicated that the potential risk of intermediate products to fish, daphnia, and green algae significantly decreased during the electrocatalytic oxidation process. This study provides a novel strategy for persulfate activation, which can significantly enhance the degradation efficiency, toxicity abatement, and energy usage effectiveness of electrocatalytic technology.

MXene-supported MIL-88A(Fe) as persulfate activator for removal of tetracycline

The poor conductivity, poor stability, and agglomeration of iron-based metal organic framework MIL-88A(Fe) limit its application as persulfate (PS) activator in water purification. Herein, MXene-supported MIL-88A(Fe) composites (M88A/MX) were synthesized to enhance its adsorption and catalytic capability for tetracycline (TC) removal. Scanning electron microscope (SEM), X-ray diffractometer (XRD), Fourier transform infrared spectrometer (FT-IR), and X-ray photoelectron spectroscopy (XPS) were used to characterize prepared materials, confirming the successful attachment of MIL-88A(Fe) to the surface of MXene. M88A/MX-0.2 composites, prepared with 0.2 g MXene addition, exhibit optimal degradation efficiency, reaching 98% under conditions of 0.2 g/L M88A/MX-0.2, 1.0 mM PS, 20 ppm TC, and pH 5. The degradation rate constants of M88A/MX-0.2 were 0.03217 min-1, which was much higher than that of MIL-88A(Fe) (0.00159 min-1) and MXene (0.00626 min-1). The removal effects of reaction parameters, such as dosage of M88A/MX-0.2 and PS; initial solution pH; and the presence of the common co-existing constituents (humic acid and the inorganic anions) were investigated in detail. Additionally, the reuse of M88A/MX-0.2 showed that the composites had good cycling stability by recurrent experiments. The results of electron paramagnetic resonance (EPR) and quenching experiments indicated that ·OH, ·SO4-, and ·O2- were involved in the M88A/MX-0.2/PS system where persulfate oxidation process was activated with prepared M88A/MX-0.2. In addition, the intermediates of photocatalytic degradation were determined by HPLC-MS, and the possible degradation pathways of the target molecules were inferred. This study offered a new avenue for sulfate-based degradation of Fe-based metal organic framework.

Multiscale computational simulation of pollutant behavior at water interfaces

The investigation of pollutant behavior at water interfaces is critical to understand pollution in aquatic systems. Computational methods allow us to overcome the limitations of experimental analysis, delivering valuable insights into the chemical mechanisms and structural characteristics of pollutant behavior at interfaces across a range of scales, from microscopic to mesoscopic. Quantum mechanics, all-atom molecular dynamics simulations, coarse-grained molecular dynamics simulations, and dissipative particle dynamics simulations represent diverse molecular interaction calculation methods that can effectively model pollutant behavior at environmental interfaces from atomic to mesoscopic scales. These methods provide a rich variety of information on pollutant interactions with water surfaces. This review synthesizes the advancements in applying typical computational methods to the formation, adsorption, binding, and catalytic conversion of pollutants at water interfaces. By drawing on recent advancements, we critically examine the current challenges and offer our perspective on future directions. This review seeks to advance our understanding of computational techniques for elucidating pollutant behavior at water interfaces, a critical aspect of water research.

Thermodynamic and Kinetic Behaviors of Persulfate-Based Electron-Transfer Regime in Carbocatalysis

A carbon-based advanced oxidation process is featured for the nonradical electron-transfer pathway (ETP) from electron-donating organic compounds to activated persulfate complexes, enabling it as a green technology for the selective oxidation of organic pollutants in complex water environments. However, the thermodynamic and kinetic behaviors of the nonradical electron-transfer regime had been ambiguous due to a neglect of the influence of pH on the mechanisms. In this study, three kinds of organic pollutants were divided in the carbon-based ETP regime: (i) physio-adsorption, (ii) adsorption-dominated ETP (oxidation rate slightly surpasses adsorption rate), and (iii) oxidation-dominated ETP (oxidation rate outpaces the adsorption rate). The differential kinetic behaviors were attributed to the physicochemical properties of the organic pollutants. For example, the hydrophobicity, molecular radius, and positive electrostatic potential controlled the mass-transfer process of the adsorption stage of the reactants (peroxydisulfate (PDS) and organics). Meanwhile, other descriptors, including the Fukui index, oxidation potential, and electron cloud density regulated the electron-transfer processes and thus the kinetics of oxidation. Most importantly, the oxidation pathways of these organic pollutants could be altered by adjusting the water chemistry. This study reveals the principles for developing efficient nonradical systems to selectively remove and recycle organic pollutants in wastewater.

Zero-valent iron-peroxydisulfate as synergistic co-milling agents for enhanced mechanochemical destruction of 2,4-dichlorophenol: Coupling reduction with oxidation

Mechanochemical (MC) remediation with zero-valent iron (ZVI) as co-milling agent enables the non-combustion and solvent-free disposal of solid halogenated organic pollutants (HOPs) via solid-phase reaction, but suffers from incomplete dechlorination (especially for less chlorinated chemicals). Herein, a reduction-oxidation coupling strategy using ZVI and peroxydisulfate as synergistic (ZVI-PDS) co-milling agents was investigated, with 2,4-dichlorophenol (2,4-DCP) as probe contaminant. By revisiting the MC destruction process of 2,4-DCP by ZVI, the contribution of both reductive and oxidative routes is confirmed, and the inefficient •OH generation is addressed. With ball-to-material and reagent-to-pollutant mass ratios of 30:1 and 13:1, respectively, ZVI-PDS achieves higher dechlorination ratio (86.8%) for 2,4-DCP within 5 h, outcompeting sole ZVI (40.3%) or PDS (33.9%), due to the accumulation of numerous SO4•-. As suggested by a two-compartment kinetic model, the optimal ZVI/PDS molar ratio of 4:1 is determined, which balances the relative contribution of reductive/oxidative routes and leads to a maximum mineralization efficiency of 77.4%. The analysis on product distribution verifies the generation of dechlorinated, ring-opening and minor coupling products (with low acute toxicity). This work validates the necessity to couple reduction with oxidation in MC destruction for solid HOPs, and may provide information on reagent formulation.

Internal Electric Field-Modulated Charge Migration Behavior in MoS2 /MIL-53(Fe) S-Scheme Heterojunction for Boosting Visible-Light-Driven Photocatalytic Chlorinated Antibiotics Degradation

Inadequate photo-generated charge separation, migration, and utilization efficiency limit the photocatalytic efficiency. Herein, a MoS2 /MIL-53(Fe) photocatalyst/activator with the S-scheme heterojunction structure is designed and the charge migration behavior is modulated by the internal electric field (IEF). The IEF intensity is enhanced to 40 mV by modulating band bending potential and the depletion layer length of MoS2 . The photo-generated electron migration process is boosted by constructing the electron migration bridge (Fe-O-S) and modulating the IEF as the driving force, confirmed by the density functional theory calculation. Compared with the pristine materials, the photocurrent density of MoS2 /MIL-53(Fe) is significantly enhanced 27.5 times. Contributed by the visible-light-driven cooperative catalytic degradation and the high-efficiency direct photo-generated electron reduction dichlorination process, satisfactory chlorinated antibiotics removal and detoxification performances are achieved. This study opens up new insights into the application of heterojunctions in photocatalytic activation of PDS in environmental remediation.

A multiple Kirkendall strategy for converting nanosized zero-valent iron to highly active Fenton-like catalyst for organics degradation

Nanosized zero-valent iron (nZVI) is a promising persulfate (PS) activator, however, its structurally dense oxide shell seriously inhibited electrons transfer for O-O bond cleavage of PS. Herein, we introduced sulfidation and phosphorus-doped biochar for breaking the pristine oxide shell with formation of FeS and FePO4-containing mixed shell. In this case, the faster diffusion rate of iron atoms compared to shell components triggered multiple Kirkendall effects, causing inward fluxion of vacancies with further coalescing into radial nanocracks. Exemplified by trichloroethylene (TCE) removal, such a unique "lemon-slice-like" nanocrack structure favored fast outward transfer of electrons and ferrous ions across the mixed shell to PS activation for high-efficient generation and utilization of reactive species, as evidenced by effective dechlorination (90.6%) and mineralization (85.4%) of TCE. [Formula: see text] contributed most to TCE decomposition, moreover, the SnZVI@PBC gradually became electron-deficient and thus extracted electrons from TCE with achieving nonradical-based degradation. Compared to nZVI/PS process, the SnZVI@PBC/PS system could significantly reduce catalyst dosage (87.5%) and PS amount (68.8%) to achieve nearly complete TCE degradation, and was anti-interference, stable, and pH-universal. This study advanced mechanistic understandings of multiple Kirkendall effects-triggered nanocrack formation on nZVI with corresponding rational design of Fenton-like catalysts for organics degradation.

Selective degradation of antibiotic in a novel Cu7S4/peroxydisulfate system via heterogeneous Cu(III) formation: Performance, mechanism and toxicity evaluation

Efficient degradation of antibiotic by peroxydisulfate (PDS)-based advanced oxidation processes in complex water environment is challenging due to the interference of impurities and the low activation efficiency of PDS caused by its symmetric structure. Herein, a novel Cu₇S₄/PDS system was developed, which can selectively remove tetracycline hydrochloride (TC) without interference of inorganic ions (e.g., Cl^- and HCO₃^-) and natural organic matter (e.g., humic acid). The results of quenching and probe experiments demonstrated that surface high-valent copper species (Cu(III)), rather than radicals and ¹O₂, are main active species for TC degradation. Cu(III) can be generated via Cu(I)/O₂ and Cu(II)/Cu(I)/PDS systems and the S species on the surface of Cu₇S₄ promotes the cycle of Cu(II)/Cu(I) and Cu(III)/Cu(II), resulting in continuous generation of Cu(III). In addition, the degradation pathways of TC were proposed based on product analysis and DFT theory calculations. The acute toxicity, developmental toxicity and mutagenicity of treated TC were significantly reduced according to the results of toxicity estimation software tool. This study shows a promising Cu₇S₄/PDS system for the degradation and detoxication of antibiotic in complex water environment, while also providing a comprehensive understanding of PDS activation by Cu₇S₄ to generate active Cu(III) species.

Proton transfer triggered in-situ construction of C=N active site to activate PMS for efficient autocatalytic degradation of low-carbon fatty amine

Removal of low-carbon fatty amines (LCFAs) in wastewater treatment poses a significant technical challenge due to their small molecular size, high polarity, high bond dissociation energy, electron deficiency, and poor biodegradability. Moreover, their low Brønsted acidity deteriorates this issue. To address this problem, we have developed a novel base-induced autocatalytic technique for the highly efficient removal of a model pollutant, dimethylamine (DMA), in a homogeneous peroxymonosulfate (PMS) system. A high reaction rate constant of 0.32 min^-1 and almost complete removal of DMA within 12 min are achieved. Multi-scaled characterizations and theoretical calculations reveal that the in situ constructed C=N bond as the crucial active site activates PMS to produce abundant ¹O₂. Subsequently, ¹O₂ oxidizes DMA through multiple H-abstractions, accompanied by the generation of another C=N structure, thus achieving the autocatalytic cycle of pollutant. During this process, base-induced proton transfers of pollutant and oxidant are essential prerequisites for C=N fabrication. A relevant mechanism of autocatalytic degradation is unraveled and further supported by DFT calculations at the molecular level. Various assessments indicate that this self-catalytic technique exhibits a reduced toxicity and volatility process, and a low treatment cost (0.47 $/m³). This technology has strong environmental tolerance, especially for the high concentrations of chlorine ion (1775 ppm) and humic acid (50 ppm). Moreover, it not only exhibits excellent degradation performance for different amine organics but also for the coexisting common pollutants including ofloxacin, phenol, and sulforaphane. These results fully demonstrate the superiority of the proposed strategy for practical application in wastewater treatment. Overall, this autocatalysis technology based on the in-situ construction of metal-free active site by regulating proton transfer will provide a brand-new strategy for environmental remediation.

Spatial confinement: A green pathway to promote the oxidation processes for organic pollutants removal from water

Organic pollutants removal from water is pressing owing to the great demand for clean water. Oxidation processes (OPs) are the commonly used method. However, the efficiency of most OPs is limited owing to the poor mass transfer process. Spatial confinement is a burgeoning way to solve this limitation by use of nanoreactor. Spatial confinement in OPs would (i) alter the transport characteristics of protons and charges; (ii) bring about molecular orientation and rearrangement; (iii) cause the dynamic redistribution of active sites in catalyst and reduce the entropic barrier that is high in unconfined space. So far, spatial confinement has been utilized for various OPs, such as Fenton, persulfate, and photocatalytic oxidation. A comprehensive summary and discussion on the fundamental mechanisms of spatial confinement mediated OPs is needed. Herein, the application, performance and mechanisms of spatial confinement mediated OPs are overviewed firstly. Subsequently, the features of spatial confinement and their effects on OPs are discussed in detail. Furthermore, environmental influences (including environmental pH, organic matter and inorganic ions) are studied with analyzing their intrinsic connection with the features of spatial confinement in OPs. Lastly, challenges and future development direction of spatial confinement mediated OPs are proposed.

Ultrafast short-range catalytic pathway modified peroxymonosulfate activation over CuO with surface oxygen defects for tetracycline hydrochloride degradation

The presence of antibiotics in water bodies seriously threatens the ecosystem and human health. Advanced oxidation processes (AOPs) based on peroxymonosulfate (PMS), an effective method to remove antibiotics, have a bottleneck problem that the low oxidant utilization is attributed to the hindered electron transfer between metal oxides and peroxides. Here, CuO with rich oxygen vacancies (OVs), MSCuO-300, was synthesized to efficiently degrade tetracycline hydrochloride (TTCH) (k = 0.095 min^-1). The dominant role of direct adsorption and activation of OVs and its regulated Cu-O, rather than surface hydroxyl adsorption, mediated a short-range catalytic pathway. The shortened catalytic pathway between active sites and PMS accelerated the charge transfer at the interface, which promoted PMS activation. Compared with Cu_xO-500 and Commercial CuO, the activation rate of PMS was increased by 11.97, and 12.64 times, respectively. OVs contributed to the production of ¹O₂ and O₂^•-, the main active species. In addition, MSCuO-300/PMS showed excellent adaptability to real water parameters, such as pH (3-11), anions, and continuous reactor maintained for 168 h. This study provides a successful case for the purification of antibiotic-containing wastewater in the design of efficient catalysts by oxygen defect strategies.

Selective Oxidation of Cyclohexane to Cyclohexanol/Cyclohexanone by Surface Peroxo Species on Cu-Mesoporous TiO2

Selective oxidation of cyclohexane to cyclohexanol/cyclohexanone (KA-oil) is an important chemical process, which is still constrained by low conversion and selectivity and high energy consumption. In this study, Cu-doped mesoporous TiO₂ (Cu-MT) has been successfully synthesized via calcinating MIL-125(Ti) doped with copper acetylacetonate, which shows high reactivity in selective oxidation of cyclohexane to KA-oil by persulfate (PS) with the desirable cyclohexane conversion of 16.8% and a selectivity of 98.0% under mild conditions and the low ratio of PS/cyclohexane of 1:1. A series of characterizations and density functional theory calculations reveal that the doped Cu(I,II) on Cu-MT is the reactive site for non-radical activation of PS with the moderate elongation of the O-O bond in PS, which then abstracts 1H (1H⁺ + 1e^-) from cyclohexane to form Cy^• and eventually KA-oil. This study gives new insight on the importance of moderately activated PS in selective oxidation of C-H.

Free radical mechanism of toxic organic compound formations from o-chlorophenol

Organic free radical intermediates are pivotal to our understanding of toxic chemicals formation from chlorophenols that widely exist in thermal processes. However, in most cases, multiple free radical intermediates exist and produce complex spectra that are hard to deconvolute. Identification of free radical intermediates is the current difficulty for detailed formation mechanisms of toxic products from chlorophenols. In this study, a universal bottom-up method was developed to identify the organic free radical intermediates. Candidate organic free radicals were firstly speculated according to the critical parameters obtained from experimental electron paramagnetic resonance (EPR) spectra and the calculated bond dissociation energies of precursors. Their theoretical spectra were then used retrospectively to justify the accordance with the experimental EPR spectra. Identification of the organic free radicals provides straightforward evidence for the formation pathways of pollutants from chlorophenol. Internal factors influencing formation of radical intermediates and the toxic products were also studied, including the ortho effect of the precursor, spin densities of the organic free radical intermediates, and steric hindrance effects of the molecular intermediates. In combination of the experimental results and theoretical calculations, detailed formation mechanisms of toxic pollutants intermediating by organic free radicals from thermal oxidation of chlorophenol were strongly evidenced.

Oxygen vacancy-mediated peroxydisulfate activation and singlet oxygen generation toward 2,4-dichlorophenol degradation on specific CuO1-x nanosheets

Durable and stable removal of 2,4-dichlorophenpl (2,4-DCP) by CuO_1-x nanosheets is reported. CuO_1-x nanosheets were fabricated by a simple defect engineering strategy and greatly increased the efficiency of peroxydisulfate (PDS) activation to improve 2,4-DCP removal by introducing abundant oxygen vacancy (V_o) to produce an electron-rich surface. Results showed that CuO_1-x nanosheets exposed more V_o as active sites for PDS activation as compared with that of CuO nanoparticles, giving rise to dramatic enhancement of catalytic performance with ultrahigh reaction rate that is qualified for serving in flow filtration system, completely degrading 100 mg L^-1 of 2,4-DCP within 3 s of residence time. Besides, experimental studies confirmed that ¹O₂ generated by V_o - mediated PDS activation plays the dominate role in the degradation of contaminants. Relative to the previously reported CuO/PDS systems, the obtained CuO_1-x nanosheets demonstrated 2.7 times higher specific PDS activity and 67 times higher specific CuO activity for 2,4-DCP removal. Our study not only improves the fundamental understanding of active sites in morphologically tunable metal oxides but also proposes a guideline for future research and engineering application of persulfate.

Efficient Activation of Peroxymonosulfate by V-Doped Graphitic Carbon Nitride for Organic Contamination Remediation

Advanced oxidation processes (AOPs) based on peroxymonosulfate (PMS) activation have been developed as an ideal pathway for completely eradication of recalcitrant organic pollutants from water environment. Herein, the V-doped graphitic carbon nitride (g-C₃N₄) is rationally fabricated by one-step thermal polymerization method to activate PMS for contamination decontamination. The results demonstrate the V atoms are successfully integrated into the framework of g-C₃N₄, which can effectively improve light absorption intensity and enhance charge separation. The V-doped g-C₃N₄ displays superior catalytic performance for PMS activation. Moreover, the doping content has a great influence on the activation performances. The radical quenching experiments confirm •O₂^-, SO₄^•-, and h⁺ are the significant species in the catalytic reaction. This work would provide a feasible strategy to exploit efficient g-C₃N₄-based material for PMS activation.

Removal of Pharmaceuticals and Personal Care Products (PPCPs) by Free Radicals in Advanced Oxidation Processes

As emerging pollutants, pharmaceutical and personal care products (PPCPs) have received extensive attention due to their high detection frequency (with concentrations ranging from ng/L to μg/L) and potential risk to aqueous environments and human health. Advanced oxidation processes (AOPs) are effective techniques for the removal of PPCPs from water environments. In AOPs, different types of free radicals (HO·, SO₄·^-, O₂·^-, etc.) are generated to decompose PPCPs into non-toxic and small-molecule compounds, finally leading to the decomposition of PPCPs. This review systematically summarizes the features of various AOPs and the removal of PPCPs by different free radicals. The operation conditions and comprehensive performance of different types of free radicals are summarized, and the reaction mechanisms are further revealed. This review will provide a quick understanding of AOPs for later researchers.

Enhanced degradation of tetracycline over FeS-based Fenton-like process: Autocatalytic decomposition of H2O2 and reduction of Fe(III)

This study constructed a FeS-based Fenton-like process to explore the degradation of TTC in the presence of copper ions. The acidic condition of pH 3 was more favorable to the H₂O₂ decomposition and TTC degradation, and it was slightly enhanced by Cu(II). The production of •OH from H₂O₂ was revealed through radical scavenging and benzoic acid probe experiments, and the ratio of H₂O₂ decomposition to •OH production was about 1-1.5, which is comparatively consistent with the theoretical ratio. FeS-based Fenton process was proved to be a homogenous system, the slow release of Fe(II) source and the autocatalytic cycle of Fe(III) to Fe(II) resulting from the reductive species of TTC and dissolved S(-II) improved the production of •OH and the degradation of TTC, which was proved by comparing TTC degradation, TOC removal, H₂O₂ decomposition and Fe(II) concentration with different iron sources (FeS, Fe(II) and Fe(III)) and external addition of dissolved S(-II). The possible degradation pathways of TTC were subsequently inferred according to the detected products by LC-MS. Understanding these autocatalytic processes is essential to reveal the transformation of redox-active substances in environments and may have potential significance in applying FeS-based Fenton-like process for the treatment of wastewater containing reductive organic matters.

Catalytic Oxygen Activation over the Defective CuO Nanoparticles for Ultrafast Dehalogenation

The nucleophilic superoxide radical (O₂^•-)-based dehalogenation reaction shows great potential to degrade the toxic halogenated organic compounds (HOCs). But such an O₂^•--mediated reductive reaction often suffers from the competition of the secondary oxidative species (e.g., •OH), leading to inferior electron efficiency and possible disinfection byproduct formation. Here, an O₂^•--dominant ultrafast dehalogenation system is developed via molecular O₂ activation by the oxygen vacancy (OV)-rich CuO nanoparticles (nCuO). The nCuO delivers a remarkable dechlorination rate constant of 3.92 × 10^-2 L min^-1 m^-2 for 2,4-dichlorophenol, much higher than that of the conventional zerovalent (bi)metals. The absorbed O₂ on the nCuO surface is exclusively responsible for O₂^•- generation, and its reactivity increases with the elevated OV content because of the enhanced orbital hybridization between the O p- and Cu d-orbitals. More importantly, the ubiquitous carbonate species firmly bound to the surface OVs block the formation of the secondary oxidative species via H₂O₂ activation, assuring the dominant role of the in situ generated O₂^•- for the selective HOC dehalogenation. The carbonate-deactivated OVs of the nCuO can be feasibly recovered via air annealing for sustainable dehalogenation. This work provides a new opportunity for selective O₂^•- generation via interfacial defect engineering for dehalogenation and other environmental applications.

Reagent-free electrokinetic remediation coupled with anode oxidation for the treatment of phenanthrene polluted soil

Electrokinetic in-situ chemical oxidation (EK-ISCO) has attracted much attention during remediation of organic contaminated soil. Oxidants in EK-ISCO brings high cost and negative effects on soil physicochemical properties. In this study, a novel approach of combined electrokinetic treatment and anode oxidation was investigated to remediate phenanthrene polluted soils without adding oxidants. The fabricated Ti₄O₇ acted as anode, and could generate •OH at the rate of 9.31 × 10^-7 mol h^-1 at current 5.10 mA cm^-2 through direct H₂O electrolysis. Electro-osmotic flow (EOF) was used to transport phenanthrene to anode for the subsequent degradation. Sandy soil, fluvo-aquic soil and red soil were selected as typical soil samples, because pH and buffer capacity were two important factors affecting the direction of EOF. Strategies were developed to regulate the direction of EOF, including adding CEM membrane, maintaining soil pH at 3.5-4.0 and mixing solution from anode and cathode chambers. After treatment, more than 81.9% of phenanthrene was removed without adding any oxidants, and the remediated soil had low toxicity for Lolium perenne growth based on 3-d cultivation results. The results indicated that EK-AO had the advantage of less energy consumption and superior environmental friendliness than traditional EK-ISCO.

Ultrahigh Peroxymonosulfate Utilization Efficiency over CuO Nanosheets via Heterogeneous Cu(III) Formation and Preferential Electron Transfer during Degradation of Phenols

In persulfate activation by copper-based catalysts, high-valent copper (Cu(III)) is an overlooked reactive intermediate that contributes to efficient persulfate utilization and organic pollutant removal. However, the mechanisms underlying heterogeneous activation and enhanced persulfate utilization are not fully understood. Here, copper oxide (CuO) nanosheets (synthesized with a facile precipitation method) exhibited high catalytic activity for peroxymonosulfate (PMS) activation with 100% 4-chlorophenol (4-CP) degradation within 3 min. Evidence for the critical role of surface-associated Cu(III) on PMS activation and 4-CP degradation over a wide pH range (pH 3-10) was obtained using in situ Raman spectroscopy, electron paramagnetic resonance, and quenching tests. Cu(III) directly oxidized 4-CP and other phenolic pollutants, with rate constants inversely proportional to their ionization potentials. Cu(III) preferentially oxidizes 4-CP rather than react with two PMS molecules to generate one molecule of ¹O₂, thus minimizing this less efficient PMS utilization pathway. Accordingly, a much higher PMS utilization efficiency (77% of electrons accepted by PMS ascribed to 4-CP mineralization) was obtained with CuO/PMS than with a radical pathway-dominated Co₃O₄/PMS system (27%) or with the ¹O₂ pathway-dominated α-MnO₂/PMS system (26%). Overall, these results highlight the potential benefits of PMS activation via heterogeneous high-valent copper oxidation and offer mechanistic insight into ultrahigh PMS utilization efficiency for organic pollutant removal.

In Situ Electrochemical Reconstitution of CF-CuO/CeO2 for Efficient Active Species Generation

Achievement of the intrinsic activity by in situ electrochemical reconstruction has been becoming a great challenge for designing a catalyst. Herein, an effective electrochemical strategy is proposed to reconstruct the surface of the CF-CuO/CeO₂ precursor. Under the stimulation of oxidative/reductive potential, abundant active sites were successfully generated on the surface of CF-CuO/CeO₂. Remarkably, the implantation of oxygen vacancy-rich CeO₂ synergistically optimizes the chemical composition and electronic structure of CF-CuO/CeO₂, greatly promoting the generation of active species. Systematic electrochemical experiments indicate that the superior catalytic performance of reconstructed CF-CuO/CeO₂ could be attributed to CuOOH/CeO₂ and Cu₂O/Ce₂O₃ active species, respectively. The oxidative-/reductive-activated CF-CuO/CeO₂ was further employed in a paired cell for the synergistic catalysis of hydroxymethylfurfural oxidation with 4-nitrophenol hydrogenation. As a result, nearly 100% Faraday efficiency for furandicarboxylic acid/4-aminophenol production was achieved in the paired system (-0.9 V vs Ag/AgCl, 1.5 h). Therefore, the electrochemical reconstruction via oxidative/reductive activation has been confirmed as a feasible approach to significantly excite the intrinsic activity of a catalyst.